Digital multimeter-htc-23
•
0 likes•368 views
This document summarizes the features and specifications of the DM-23 digital multimeter. It can measure DC and AC voltage, current, resistance, capacitance, frequency and has additional functions like diode testing and continuity buzzer. It has a large LCD display, 20,000 count resolution, and safety features like input impedance protection and auto power off. Key specifications include measurement ranges from 200mV to 1000V for voltage and 200uA to 20A for current. It is powered by 9V battery and includes test leads, holster, and manual.
Report
Share
Report
Share
Download to read offline
Recommended
Htc ac dc clamp meter cm-2300
This document summarizes the specifications of the CM-2300 AC/DC digital clamp meter. It can measure voltage up to 1000V, current up to 2000A, resistance up to 40MΩ, frequency up to 1MHz, and includes features like continuity testing, diode testing, and data hold. It has a 33⁄4 digit LCD display, 4000 count resolution, and CE CAT III 600V rating for safety. Standard accessories include a carrying case, test leads, and manual.
Htc digital multimeter dm 23
The DM-23 digital multimeter has a 41⁄2 digit LCD display with manual range selection and features measurements for voltage, current, resistance, capacitance, frequency, diode testing, and transistor testing. It has an input impedance of less than 30 ohms, can make 3 measurements per second, and operates on a 9V battery with low battery indication and auto power-off after 30 minutes of non-use. Standard accessories include test leads, a holster, and manual.
Htc ac dc clamp meter cm2046
This document summarizes the specifications of the AC/DC 1000A Clamp Meter CM-2046, including its features such as a 31⁄2 digit LCD display, data hold and peak hold functions, auto ranging, and maximum jaw size of 51mm. It also lists the meter's technical specifications for measuring DC and AC voltage, DC and AC current, resistance, continuity, and diodes. Standard accessories include a carrying case, test leads, and manual.
98 a+ specification- www.ttbvs.com
This document compares the specifications of two digital multimeter models, the 98A+ and 98C+. It lists the measurement ranges and accuracy for voltage, current, resistance, capacitance, frequency, thermocouples, and temperature for both models. Both models have a 22,000 count display, 3 readings per second measurement rate, and support features like automatic/manual ranging, diode and switch testing, data hold, and maximum/minimum readings. The main differences are that the 98C+ supports wireless communication and remote control via software, while the 98A+ has a lower safety rating and uses USB connectivity.
Htc ac clamp meter 1000amp cm 2030
This document provides specifications for the CM-2030 AC Clamp Meter that can measure up to 1000 amps. It lists the meter's key features such as being fully protected and having a 52mm jaw opening. The technical data section specifies the meter's measurement ranges, resolutions and accuracies for functions like DC voltage, AC voltage, AC current, resistance, diode testing and continuity testing. It concludes with standard accessories, dimensions and contact information for the manufacturer.
Htc ac leakage current tester cl 2054
The CL-2054 is an AC leakage current tester with high resolution up to 10uA and a large LCD display. It can measure current from 40mA to 100A, voltage up to 400V, and resistance from 40Ω to 400Ω. Additional features include auto power off, data hold, overload protection, and low battery indication. Standard accessories include test leads, a soft carrying case, and manual. The dimensions are 209mm x 43mm x 30mm.
Htc digital multi meter dm 97
This document summarizes the specifications of the DM-97 digital multimeter. It can measure DC and AC voltage up to 1000V, DC and AC current up to 20A, resistance up to 40MΩ, capacitance up to 200uF, frequency up to 30MHz, temperature from -40 to 1000 degrees Celsius, and transistor gain. It has a 4000 count LCD display, data hold, max/min value hold, and auto power off after 30 minutes. Standard accessories include test leads, holster, manual, and temperature probe.
Clamping Force Monitoring for Injection Molding Machines
Analog sensors can detect small changes in the length of tie bars in plastic injection molding machines, allowing continuous monitoring of clamping force without expensive instrumentation. The sensors measure elongation of up to 2mm as the tie bar stretches under hydraulic forces, providing feedback to prevent overload and protect molds. This lower cost solution improves machine performance and molded product quality by ensuring the clamping force is properly controlled.
Recommended
Htc ac dc clamp meter cm-2300
This document summarizes the specifications of the CM-2300 AC/DC digital clamp meter. It can measure voltage up to 1000V, current up to 2000A, resistance up to 40MΩ, frequency up to 1MHz, and includes features like continuity testing, diode testing, and data hold. It has a 33⁄4 digit LCD display, 4000 count resolution, and CE CAT III 600V rating for safety. Standard accessories include a carrying case, test leads, and manual.
Htc digital multimeter dm 23
The DM-23 digital multimeter has a 41⁄2 digit LCD display with manual range selection and features measurements for voltage, current, resistance, capacitance, frequency, diode testing, and transistor testing. It has an input impedance of less than 30 ohms, can make 3 measurements per second, and operates on a 9V battery with low battery indication and auto power-off after 30 minutes of non-use. Standard accessories include test leads, a holster, and manual.
Htc ac dc clamp meter cm2046
This document summarizes the specifications of the AC/DC 1000A Clamp Meter CM-2046, including its features such as a 31⁄2 digit LCD display, data hold and peak hold functions, auto ranging, and maximum jaw size of 51mm. It also lists the meter's technical specifications for measuring DC and AC voltage, DC and AC current, resistance, continuity, and diodes. Standard accessories include a carrying case, test leads, and manual.
98 a+ specification- www.ttbvs.com
This document compares the specifications of two digital multimeter models, the 98A+ and 98C+. It lists the measurement ranges and accuracy for voltage, current, resistance, capacitance, frequency, thermocouples, and temperature for both models. Both models have a 22,000 count display, 3 readings per second measurement rate, and support features like automatic/manual ranging, diode and switch testing, data hold, and maximum/minimum readings. The main differences are that the 98C+ supports wireless communication and remote control via software, while the 98A+ has a lower safety rating and uses USB connectivity.
Htc ac clamp meter 1000amp cm 2030
This document provides specifications for the CM-2030 AC Clamp Meter that can measure up to 1000 amps. It lists the meter's key features such as being fully protected and having a 52mm jaw opening. The technical data section specifies the meter's measurement ranges, resolutions and accuracies for functions like DC voltage, AC voltage, AC current, resistance, diode testing and continuity testing. It concludes with standard accessories, dimensions and contact information for the manufacturer.
Htc ac leakage current tester cl 2054
The CL-2054 is an AC leakage current tester with high resolution up to 10uA and a large LCD display. It can measure current from 40mA to 100A, voltage up to 400V, and resistance from 40Ω to 400Ω. Additional features include auto power off, data hold, overload protection, and low battery indication. Standard accessories include test leads, a soft carrying case, and manual. The dimensions are 209mm x 43mm x 30mm.
Htc digital multi meter dm 97
This document summarizes the specifications of the DM-97 digital multimeter. It can measure DC and AC voltage up to 1000V, DC and AC current up to 20A, resistance up to 40MΩ, capacitance up to 200uF, frequency up to 30MHz, temperature from -40 to 1000 degrees Celsius, and transistor gain. It has a 4000 count LCD display, data hold, max/min value hold, and auto power off after 30 minutes. Standard accessories include test leads, holster, manual, and temperature probe.
Clamping Force Monitoring for Injection Molding Machines
Analog sensors can detect small changes in the length of tie bars in plastic injection molding machines, allowing continuous monitoring of clamping force without expensive instrumentation. The sensors measure elongation of up to 2mm as the tie bar stretches under hydraulic forces, providing feedback to prevent overload and protect molds. This lower cost solution improves machine performance and molded product quality by ensuring the clamping force is properly controlled.
Htc oscilloscope st 16 a
This document provides the specifications for the ST-16A oscilloscope, including its bandwidth of DC to 10MHz, vertical deflection range of 10mV to 5V per division, sweep rate range of 200ms to 0.5us per division, and ability to trigger from either an internal or external source. Key features include a digital-code sweep switch, AC power supply of 200V, and standard accessories of a power cord, 20MHz probe, and manual. The dimensions are listed as 91 x 225 x 290mm.
Htc ac digital clamp meter cm2100 & cm 2200
The AC Digital Clamp Meter CM-2100/CM-2200 is a multi-function meter that measures AC/DC voltage, AC current, resistance, frequency, continuity, and diodes. It has a 33⁄4 digit LCD display with auto and manual ranging, maximum jaw size of 57mm, data hold function, and auto power off. The CM-2100 measures up to 1500A AC current while the CM-2200 measures up to 2000A AC current. Standard accessories include a carrying case, test leads, and manual.
Data Teknis Gossen Metrawatt Multimeter : METRALINE DM61, METRALINE DM62
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Htc digital multimeter dm 87
The DM-87 is a 41⁄2 digital multimeter that features various measurement functions including voltage, current, resistance, capacitance, frequency, temperature, and special functions like VSD testing and transistor testing. It has a large LCD display, data hold, max/min value hold, and auto power-off capabilities. Measurement ranges and basic accuracies are provided for each function. Standard accessories include test leads, battery, manual, temperature probe, and crocodile clip.
98 c+ specification- www.ttbvs.com
This document describes the specifications of two digital multimeter models, the 98C+ and 98A+. Both models measure DC and AC voltage, current, resistance, capacitance, frequency, thermocouples, and temperature. They feature a 2.4G wireless communication module, 1000 data groups storage, LCD display, and function similarly with the 98C+ offering higher safety ratings. Key specifications are provided for each measurement function and general device features like power supply, safety ratings, size, and weight are also listed.
Htc oscilloscope st 16 b
This document summarizes the specifications and features of the ST-16B oscilloscope. It is a small-scale oscilloscope that offers high trigger sensitivity and easy operation at a high performance to price ratio. Key specifications include a bandwidth of DC-10MHz, Y deflection range of 10mV/div to 10V/div, sweep rate of 0.1μs/div to 0.1s/div, and trigger sources of internal, external, and TV. Standard accessories include a power cord, 20MHz probe, and manual.
Htc digital clamp meter cm 2070c
The CM-2070C is a 3 1/2 digital clamp meter that can measure DC and AC voltage, current, resistance, temperature, and non-contact voltage. It has features like auto-ranging, backlight display, and protection from interference. The clamp meter has a 52mm jaw opening and can measure up to 1000A AC current, 1000V DC or AC voltage, and 20MΩ resistance, with accuracies between 0.5-2.0% of the reading. Standard accessories include test leads, battery, manual, and temperature probe.
Kingsine K3066i Protection Relay Testing - Datasheet Manual - Supreme Technology
With alarm function of housing grounding testing and external voltage input, to guaranty personal security
Offer independent Aux. DC to tested devices, 0 ~ 300V/0.6A (Poleless and adjustable)
Testing interface offer unique output monitoring function and Pre-curve-tracing function
Price: AUD $ 47,520.00 ex GST
Data Teknis Gossen Metrawatt Insulation Tester METRISO 1000A
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
PS-500H
This document describes an electronic pocket scale that features a stable display, fast reaction time, strong anti-interference, simple counting functions, multiple unit options including grams, ounces, penny weights, troy ounces, and carats. The scale has a 500g capacity, 0.1g readability, operates on 4.5V DC power, and measures 130mm x 80mm with a 35mm LCD display.
SOLAR WATER HEATER AND LED LANTERN By Vtech Electrocon
This document provides specifications for several product lines from Singnile Technology Co., Ltd:
- The MPPT Series includes solar inverters ranging from 1000VA to 5000VA with maximum solar input power of 600W to 3000W.
- The PWM Series are PWM control inverters from 1000VA to 5000VA for 12V, 24V, or 48V battery systems.
- The SI Series are integrated PWM inverters from 300W to 3000W that also function as UPS systems.
- The SA Series are integrated AC solar inverters from 100W to 3000W with built-in lead acid battery storage and solar charge controller.
Digital clampmeters
The document describes several multimeter models from MECO METERS PVT. LTD. including their specifications such as voltage and current ranges, functions, and display features. The models measure AC and DC current from 40A to 1200A, have resistance ranges from 400 ohms to 40 megohms, and include functions like capacitance, frequency, temperature, and data hold. Jaw openings range from 25mm to 55mm. MECO METERS is an Indian company located in Navi Mumbai that manufactures various multimeter models for electrical measurements.
Clamp-On, Precision, Split Core Current Transformer
This document provides information on various current transformers (CTs) for measuring alternating current (AC). It describes CTs that clamp onto wires non-invasively, as well as split-core CTs that open for inserting a wire. Specifications covered include transformer ratios, output voltages, accuracy ranges, insulation ratings, and more. The document encourages visiting the listed website for additional product details and models.
Auto Ranging Digital Multimeter UT60H in India - 4000 Counts True RMS (400MHz)
Auto Ranging Digital Multimeter UT60H in India - 4000 Counts True RMS (400MHz). 0.1% basic DCV accuracy, Temperature/Frequency/Capacitance measurements.
Htc ac dc clamp meter htc-113
The HTC-113 is a 33⁄4 digital clamp meter that measures AC/DC voltage and current, resistance, capacitance, temperature, and frequency. It has an auto and manual range function, data hold, auto power off, backlight, and can measure up to 1000A and 4000 counts. It comes with test leads, carrying case, and manual, and has dimensions of 260x64x35mm.
Kyoritsu Insulation Tester Kew 3125A
- Insulation Resistance up to 1TΩ
- Short-Circuit Current up to 1.5mA
- Wide Test Voltage from 250V to 5000V
- Diagnosis Function of PI and DAR
- Newly-designed alligator clip
- It comes with a tough hard case
- Filter function reduces noise interference for obtaining stable measurement
- Large display with Bar Graph indication and backlight
Live voltage warning
- Safety standard IEC 61010-1 CAT IV 300V / CAT III 600V
B tech
“DESIGN A DIGITAL FILTER TO MINIMIZE THE OUTPUT NOISE USING EQUALIZER CIRCUIT
AND MEASURE THE OUTPUT RESPONSE”
Digital filter design using VHDL
Best document you could ever get on the topic
Written in full details from basic to advanced level
Submitted and approved as a Final year project
Dsp U Lec08 Fir Filter Design
This document discusses the design of finite impulse response (FIR) filters. It begins by describing the basic FIR filter model and properties such as filter order and length. It then covers topics such as linear phase response, different filter types (low-pass, high-pass, etc.), deriving the ideal impulse response, and filter specification in terms of passband/stopband edges and ripple levels. The document concludes by outlining the common FIR design method of windowing the ideal impulse response, describing popular window functions, and providing a step-by-step example of designing a low-pass FIR filter using the Hamming window.
digital filters
This document discusses digital filters. It begins by defining digital filters as electronic circuits that perform signal processing functions by removing or enhancing certain frequency components of a sampled, discrete-time signal. It then outlines four basic types of ideal digital filters defined by their magnitude responses. The document also discusses different classifications of digital filters based on characteristics like linearity, time-invariance, and structure. It provides examples of common filter structures like direct form, cascade form, and parallel form. Finally, it briefly compares digital and analog filters, noting advantages and disadvantages of each.
Digital Filters Part 1
This document provides an overview of digital filters and focuses on finite impulse response (FIR) filters. It defines digital filtering and compares it to analog filtering. It describes different types of digital filters including FIR filters and explains how to design, implement and characterize FIR filters. Key aspects of FIR filters are that they have a finite impulse response, linear phase, and are always stable. Design techniques like windowing methods and Parks-McClellan optimization are covered.
Dsp U Lec07 Realization Of Discrete Time Systems
This document provides an overview of discrete-time systems and digital signal processing. It discusses discrete-time system components like unit delays and adders. It also covers discrete system networks including FIR and IIR networks. Various realizations of discrete systems are presented, including direct form I and II, cascaded, and parallel realizations. Digital filters are defined and the advantages and disadvantages as well as types (FIR and IIR) are discussed. Design steps and specifications for digital filters are also outlined.
More Related Content
What's hot
Htc oscilloscope st 16 a
This document provides the specifications for the ST-16A oscilloscope, including its bandwidth of DC to 10MHz, vertical deflection range of 10mV to 5V per division, sweep rate range of 200ms to 0.5us per division, and ability to trigger from either an internal or external source. Key features include a digital-code sweep switch, AC power supply of 200V, and standard accessories of a power cord, 20MHz probe, and manual. The dimensions are listed as 91 x 225 x 290mm.
Htc ac digital clamp meter cm2100 & cm 2200
The AC Digital Clamp Meter CM-2100/CM-2200 is a multi-function meter that measures AC/DC voltage, AC current, resistance, frequency, continuity, and diodes. It has a 33⁄4 digit LCD display with auto and manual ranging, maximum jaw size of 57mm, data hold function, and auto power off. The CM-2100 measures up to 1500A AC current while the CM-2200 measures up to 2000A AC current. Standard accessories include a carrying case, test leads, and manual.
Data Teknis Gossen Metrawatt Multimeter : METRALINE DM61, METRALINE DM62
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Htc digital multimeter dm 87
The DM-87 is a 41⁄2 digital multimeter that features various measurement functions including voltage, current, resistance, capacitance, frequency, temperature, and special functions like VSD testing and transistor testing. It has a large LCD display, data hold, max/min value hold, and auto power-off capabilities. Measurement ranges and basic accuracies are provided for each function. Standard accessories include test leads, battery, manual, temperature probe, and crocodile clip.
98 c+ specification- www.ttbvs.com
This document describes the specifications of two digital multimeter models, the 98C+ and 98A+. Both models measure DC and AC voltage, current, resistance, capacitance, frequency, thermocouples, and temperature. They feature a 2.4G wireless communication module, 1000 data groups storage, LCD display, and function similarly with the 98C+ offering higher safety ratings. Key specifications are provided for each measurement function and general device features like power supply, safety ratings, size, and weight are also listed.
Htc oscilloscope st 16 b
This document summarizes the specifications and features of the ST-16B oscilloscope. It is a small-scale oscilloscope that offers high trigger sensitivity and easy operation at a high performance to price ratio. Key specifications include a bandwidth of DC-10MHz, Y deflection range of 10mV/div to 10V/div, sweep rate of 0.1μs/div to 0.1s/div, and trigger sources of internal, external, and TV. Standard accessories include a power cord, 20MHz probe, and manual.
Htc digital clamp meter cm 2070c
The CM-2070C is a 3 1/2 digital clamp meter that can measure DC and AC voltage, current, resistance, temperature, and non-contact voltage. It has features like auto-ranging, backlight display, and protection from interference. The clamp meter has a 52mm jaw opening and can measure up to 1000A AC current, 1000V DC or AC voltage, and 20MΩ resistance, with accuracies between 0.5-2.0% of the reading. Standard accessories include test leads, battery, manual, and temperature probe.
Kingsine K3066i Protection Relay Testing - Datasheet Manual - Supreme Technology
With alarm function of housing grounding testing and external voltage input, to guaranty personal security
Offer independent Aux. DC to tested devices, 0 ~ 300V/0.6A (Poleless and adjustable)
Testing interface offer unique output monitoring function and Pre-curve-tracing function
Price: AUD $ 47,520.00 ex GST
Data Teknis Gossen Metrawatt Insulation Tester METRISO 1000A
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
PS-500H
This document describes an electronic pocket scale that features a stable display, fast reaction time, strong anti-interference, simple counting functions, multiple unit options including grams, ounces, penny weights, troy ounces, and carats. The scale has a 500g capacity, 0.1g readability, operates on 4.5V DC power, and measures 130mm x 80mm with a 35mm LCD display.
SOLAR WATER HEATER AND LED LANTERN By Vtech Electrocon
This document provides specifications for several product lines from Singnile Technology Co., Ltd:
- The MPPT Series includes solar inverters ranging from 1000VA to 5000VA with maximum solar input power of 600W to 3000W.
- The PWM Series are PWM control inverters from 1000VA to 5000VA for 12V, 24V, or 48V battery systems.
- The SI Series are integrated PWM inverters from 300W to 3000W that also function as UPS systems.
- The SA Series are integrated AC solar inverters from 100W to 3000W with built-in lead acid battery storage and solar charge controller.
Digital clampmeters
The document describes several multimeter models from MECO METERS PVT. LTD. including their specifications such as voltage and current ranges, functions, and display features. The models measure AC and DC current from 40A to 1200A, have resistance ranges from 400 ohms to 40 megohms, and include functions like capacitance, frequency, temperature, and data hold. Jaw openings range from 25mm to 55mm. MECO METERS is an Indian company located in Navi Mumbai that manufactures various multimeter models for electrical measurements.
Clamp-On, Precision, Split Core Current Transformer
This document provides information on various current transformers (CTs) for measuring alternating current (AC). It describes CTs that clamp onto wires non-invasively, as well as split-core CTs that open for inserting a wire. Specifications covered include transformer ratios, output voltages, accuracy ranges, insulation ratings, and more. The document encourages visiting the listed website for additional product details and models.
Auto Ranging Digital Multimeter UT60H in India - 4000 Counts True RMS (400MHz)
Auto Ranging Digital Multimeter UT60H in India - 4000 Counts True RMS (400MHz). 0.1% basic DCV accuracy, Temperature/Frequency/Capacitance measurements.
Htc ac dc clamp meter htc-113
The HTC-113 is a 33⁄4 digital clamp meter that measures AC/DC voltage and current, resistance, capacitance, temperature, and frequency. It has an auto and manual range function, data hold, auto power off, backlight, and can measure up to 1000A and 4000 counts. It comes with test leads, carrying case, and manual, and has dimensions of 260x64x35mm.
Kyoritsu Insulation Tester Kew 3125A
- Insulation Resistance up to 1TΩ
- Short-Circuit Current up to 1.5mA
- Wide Test Voltage from 250V to 5000V
- Diagnosis Function of PI and DAR
- Newly-designed alligator clip
- It comes with a tough hard case
- Filter function reduces noise interference for obtaining stable measurement
- Large display with Bar Graph indication and backlight
Live voltage warning
- Safety standard IEC 61010-1 CAT IV 300V / CAT III 600V
What's hot (16)
Data Teknis Gossen Metrawatt Multimeter : METRALINE DM61, METRALINE DM62
Data Teknis Gossen Metrawatt Multimeter : METRALINE DM61, METRALINE DM62
Kingsine K3066i Protection Relay Testing - Datasheet Manual - Supreme Technology
Kingsine K3066i Protection Relay Testing - Datasheet Manual - Supreme Technology
Data Teknis Gossen Metrawatt Insulation Tester METRISO 1000A
Data Teknis Gossen Metrawatt Insulation Tester METRISO 1000A
SOLAR WATER HEATER AND LED LANTERN By Vtech Electrocon
SOLAR WATER HEATER AND LED LANTERN By Vtech Electrocon
Clamp-On, Precision, Split Core Current Transformer
Clamp-On, Precision, Split Core Current Transformer
Auto Ranging Digital Multimeter UT60H in India - 4000 Counts True RMS (400MHz)
Auto Ranging Digital Multimeter UT60H in India - 4000 Counts True RMS (400MHz)
Viewers also liked
B tech
“DESIGN A DIGITAL FILTER TO MINIMIZE THE OUTPUT NOISE USING EQUALIZER CIRCUIT
AND MEASURE THE OUTPUT RESPONSE”
Digital filter design using VHDL
Best document you could ever get on the topic
Written in full details from basic to advanced level
Submitted and approved as a Final year project
Dsp U Lec08 Fir Filter Design
This document discusses the design of finite impulse response (FIR) filters. It begins by describing the basic FIR filter model and properties such as filter order and length. It then covers topics such as linear phase response, different filter types (low-pass, high-pass, etc.), deriving the ideal impulse response, and filter specification in terms of passband/stopband edges and ripple levels. The document concludes by outlining the common FIR design method of windowing the ideal impulse response, describing popular window functions, and providing a step-by-step example of designing a low-pass FIR filter using the Hamming window.
digital filters
This document discusses digital filters. It begins by defining digital filters as electronic circuits that perform signal processing functions by removing or enhancing certain frequency components of a sampled, discrete-time signal. It then outlines four basic types of ideal digital filters defined by their magnitude responses. The document also discusses different classifications of digital filters based on characteristics like linearity, time-invariance, and structure. It provides examples of common filter structures like direct form, cascade form, and parallel form. Finally, it briefly compares digital and analog filters, noting advantages and disadvantages of each.
Digital Filters Part 1
This document provides an overview of digital filters and focuses on finite impulse response (FIR) filters. It defines digital filtering and compares it to analog filtering. It describes different types of digital filters including FIR filters and explains how to design, implement and characterize FIR filters. Key aspects of FIR filters are that they have a finite impulse response, linear phase, and are always stable. Design techniques like windowing methods and Parks-McClellan optimization are covered.
Dsp U Lec07 Realization Of Discrete Time Systems
This document provides an overview of discrete-time systems and digital signal processing. It discusses discrete-time system components like unit delays and adders. It also covers discrete system networks including FIR and IIR networks. Various realizations of discrete systems are presented, including direct form I and II, cascaded, and parallel realizations. Digital filters are defined and the advantages and disadvantages as well as types (FIR and IIR) are discussed. Design steps and specifications for digital filters are also outlined.
Dsp U Lec09 Iir Filter Design
The document discusses the design of IIR digital filters using different methods. It begins by describing the difference equation and transfer function of IIR filters. It then covers the Impulse Invariant Method and Bilinear Z-Transform (BZT) Method for designing IIR filters by transforming analog prototypes. Key steps include prewarping frequencies, designing analog filters, and applying the bilinear transform. Examples demonstrate applying these methods to design Butterworth filters.
Fir and iir filter_design
This document summarizes a presentation on FIR and IIR filter design techniques. It introduces common IIR filter design methods like impulse invariance and bilinear transformation. It also discusses FIR filter design using window functions, frequency sampling, and minimizing mean squared error. Specific window functions are examined, including rectangular, triangular, Hanning, Hamming, Kaiser, and Blackman windows. The document provides an overview of digital filter design topics and serves as a reference for further exploration of FIR and IIR filter design methods.
Design of Filters PPT
This document provides an overview of digital filter design. It introduces finite impulse response (FIR) and infinite impulse response (IIR) filters. FIR filters are designed using window techniques like rectangular, Hamming, and Kaiser windows. IIR filters are designed using approximation methods like Butterworth, Chebyshev I, and Chebyshev II. MATLAB code is provided to design low pass, high pass, and other filters using different window and approximation techniques. Pros and cons of FIR and IIR filters are discussed along with references.
Design of IIR filters
3F3 – Digital Signal Processing (DSP), January 2009, lecture slides 6, Dr Elena Punskaya, Cambridge University Engineering Department
Basics of Digital Filters
3F3 – Digital Signal Processing (DSP), January 2009, lecture slides 4, Dr Elena Punskaya, Cambridge University Engineering Department
Filters
Filters are electrical circuits that pass specified frequency bands while attenuating signals outside that band. They are classified as active or passive. Active filters have advantages like smaller size and weight due to integrated components, and they do not load signal sources. However, they have limitations like finite bandwidth and sensitivity to temperature changes. Common filters include low pass, high pass, band pass, band stop, and all pass filters. State variable filters can produce multiple filter responses and are called universal filters.
Viewers also liked (12)
Similar to Digital multimeter-htc-23
Htc laser distance meter dm 86
This document summarizes the features and specifications of the DM-86 31⁄2 digital multimeter. It measures DC and AC voltage, DC and AC current, resistance, temperature, has features like diode and transistor testing, continuity testing, low battery indication, and auto power off. It has basic accuracy ranges from ±(0.5% + 4) to ±(1.5% + 5) depending on the measurement function. Additional features include non-contact voltage detection, 10MΩ input impedance, 3 samples/second, 40-400Hz AC frequency response, and it runs on a 9V battery with approximately 30 minutes of auto power off time. Standard accessories include test leads, holster, temperature probe
Htc digital multimeter dm 56
This document summarizes the features and specifications of the DM-56 digital multimeter. It can measure DC and AC voltage up to 1000V, DC and AC current up to 20A, resistance up to 200MΩ, capacitance up to 200uF, frequency up to 200kHz, and includes additional functions like diode and transistor testing. It has a large LCD display, 20,000 count resolution, backlight, data hold, and auto power off. Measurements are taken 3 times per second with an accuracy of 0.05% for DC voltage and 1.5% for AC current. It is powered by a 9V battery and includes test leads, holster, and manual.
Htc ac dc clamp meter cm-2300
This document summarizes the specifications of the CM-2300 AC/DC digital clamp meter. It can measure voltage up to 1000V, current up to 2000A, resistance up to 40MΩ, frequency up to 1MHz, and includes features like continuity testing, diode testing, and data hold. It has a 33⁄4 digit LCD display, 4000 count resolution, and CE CAT III 600V rating for safety. Standard accessories include a carrying case, test leads, and manual.
Htc digital multimeter dm 88
This document summarizes the features and specifications of the DM-88 digital multimeter. It can measure DC and AC voltage and current, resistance, capacitance, frequency, temperature, and has special functions like logic testing, diode and transistor testing, continuity testing, and auto power off. Measurements are displayed on a large LCD screen. It operates on 2 AAA batteries and has basic accuracy of 0.5% + digits for DC voltage and 1% + digits for DC current.
Digital multimeter
The document discusses several digital multimeters from MECO METERS PVT. LTD. including a 61⁄2 digit bench top model with 1,20,000 counts, 5 digit handheld model with 80,000 counts, and models that feature functions like diode test, continuity test, and frequency measurement. It also provides contact information for MECO METERS PVT. LTD.
Clamp meters and Multimeters
This document provides specifications for several digital multimeters and clamp meters. It includes:
- Details on 4 digital multimeters (models ARW 992L, ARW 9911, ARW 9912, ARW 9908) that measure voltage, current, resistance and more with accuracies between 0.5-1.5% and display counts from 2000-4000 points.
- 3 clamp meters (models ARW 3341, ARW 3343, ARW 331) that measure AC and DC current and voltage with accuracies between 1.0-3.0% and display counts from 2000-4000 points. One model measures up to 1000A.
- A clamp meter (ARW 3347
Htc ac digital clamp meter cm2100 & cm 2200
The AC Digital Clamp Meter CM-2100/CM-2200 is a multi-function meter that measures AC/DC voltage, AC current, resistance, frequency, continuity, and diodes. It has a 33⁄4 digit LCD display with auto and manual ranging, maximum jaw size of 57mm, data hold function, and auto power off. The CM-2100 measures up to 1500A AC current while the CM-2200 measures up to 2000A AC current. Standard accessories include a carrying case, test leads, and manual.
Htc ac dc clamp meter cm2046
This document summarizes the specifications of the AC/DC 1000A Clamp Meter CM-2046, including its features such as a 31⁄2 digit LCD display, data hold and peak hold functions, auto ranging, and maximum jaw size of 51mm. It also lists the meter's technical specifications for measuring DC and AC voltage, DC and AC current, resistance, continuity, and diodes. Standard accessories include a carrying case, test leads, and manual.
8145 b specification- www.ttbvs.com
The 8145B digital multimeter can measure DC voltage, AC voltage, DC current, AC current, resistance, frequency, continuity, and diodes with high accuracy of 0.03% for DC voltage. It has a 33,000 count primary display and can measure up to 1000V, 10A, 100MΩ, and 30MHz. The multimeter connects to a computer via USB to allow computer control, monitoring, and data storage of measurements.
187 specification- www.ttbvs.com
This document summarizes the specifications of a True RMS digital multimeter. It can measure AC voltage, DC voltage, AC current, DC current, resistance, frequency, period, pulse width, capacitance, diode, thermal resistance, and more. Measurements have an accuracy of 0.02% or 0.05%. It has automatic and manual ranging, multiple measurement rates, temperature compensation, and safety certifications. The multimeter is powered by batteries and has dimensions of 205 x 95 x 42 mm and a weight of approximately 500g.
constant voltage dali dimmable driver
Shanghai Euchips 100-240VAC 12W 12VDC constant voltage dali dimmable driver EUP12D-1W12V-0 with high quality and excellent pre-sales and after-sales service.
Altistart 22 ats22 c41s6
This document provides specifications for the ATS22C41S6 soft starter for asynchronous motors. It is rated for 230V/110kW, 400-440V/220kW, and 500V/250kW power. Key features include start torque control up to 3.5 times motor current, IP00 protection, internal bypass, and Modbus communication. It is designed for vertical mounting and measures 425mm x 206mm x 299mm.
Av02 3563 en-ds_acpl-c87x_04mar2013-2
This document provides specifications for the ACPL-C87B/C87A/C870 precision optically isolated voltage sensor. It includes:
- Key features such as high input impedance, wide operating temperature range, and small package size.
- Electrical specifications including gain accuracy of ±0.5% for the ACPL-C87B, input offset voltage, nonlinearity, and temperature drift.
- Recommended operating conditions and absolute maximum ratings.
- Safety and regulatory approval information for worldwide use.
Recom
Der DC / DC-Wandler der RM-Serie wurde zur Trennung oder Umwandlung von Gleichstrom entwickelt Schienen mit sehr geringen Lasten. Effizienzen sind typischerweise 10% höher als vergleichbare 0,5W oder 1W Wandler laufen bei gleicher Last.
Htc digital multi meter dm 96
The DM-96 digital multimeter has a 4000 count display, auto and manual ranging, data hold and auto power off functions. It can measure DC and AC voltage up to 600V, DC and AC current up to 10A, resistance up to 40MΩ, capacitance up to 100μF, frequency up to 10MHz, and duty cycle from 0.1% to 99.9% with a basic accuracy of 0.5% or better across its ranges. Standard accessories include test leads, a holster, and manual. The multimeter has dimensions of 155mm x 75mm x 33mm.
Riello master-industrial-ups-datasheet
Master Industrial series UPS provide maximum protection and power quality for any type of load, especially industrial applications, such as manufacturing and petrochemical processes.
Single Axis Fingertip Joystick | W200
RunnTech W200 Single Axis Fingertip Joystick is mainly used in hydraulic proportional control and variable frequency motor control, such as remote control chest packs and the control of construction, agricultural, material handling equipment or lifting equipment, etc.
Ref 615
This document provides technical specifications for an ABB REF615 ANSI feeder protection relay. It includes 30 tables that specify details such as power supply requirements, input/output ratings, communication protocols, environmental testing procedures, EMC compliance, and supported protection functions. The relay is approved to relevant safety and EMC standards and directives.
HIOKI Digital Multimeter DT4281 catalogue
DIGITAL MULTIMETER DT4281/DT4282
Speedy Performance of Professional Testing
Large, easy-to-see display
Optimized for inverter system measurements
Ideal for checking ripple voltage in DC supply systems
Enhance UPS maintenance efficiency
Includes μA DC range for burner system inspection
Data Communications function
https://www.n-denkei.com/singapore/inquiry/
189 specification- www.ttbvs.com
This document summarizes the specifications of a digital multimeter. It can measure AC/DC voltage and current, resistance, frequency, duty cycle, diode, capacitance, temperature, and more. Measurements have a resolution of up to 0.0001 units. It has features like peak detection, data hold, and fast/slow measurement rates. General specifications include an operating temperature range of 0-50°C, drop and vibration resistance, 1 year calibration period, and power from batteries with auto-off. Safety standards include IEC 61010-1 for categories II and III.
Similar to Digital multimeter-htc-23 (20)
Digital multimeter-htc-23
- 1. Digital Multimeter DM-23 Features : • 4½ Digital Multimeter • 20,000 Counts • Large LCD Display with Manual Range • No Power-OFF under natural operation • Data Hold, Max • Capacitance, Frequency • Backlight Technical Data : Basic Functions Range Basic Accuracy DC Voltage 200mV/2V/20V/200V/1000V ±(0.05%+3) AC Voltage 2V/20V/200V/750V ±(0.8%+25) DC Current 200uA/20mA/20mA/200mA/20A ±(0.5%+4) AC Current 200mA/20A ±(1.5%+25) Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ ±(0.2%+5) Capacitance 2nF/20nF/200nF/2uF/200uF ±(2.0%+20) Frequency 200kHz ±(3.0%+15) Special Function : Diode test Anti Shock Protect hFE test Input impedance 10MΩ Continuity Buzzer Approx. < 30Ω +10Ω Sampling Rate 3 times per second Low Battery Display Approx. < 7.5V AC Frequency Response 40-400Hz Auto Power OFF Approx. 30 min. Power 9V (6F22) Function Protection • Standard Accessories : Test Leads, Holster, Manual • Dimension : 185(H) x 93(W) x 35(D)mm Industrial Supply Syndicate, 54, Ezra Street, Kolkata - 700001 Phone: 3291 6080, 2235 6676, Fax: 033 3022 2923, Email: info@industrialindia.com