Htc oscilloscope st 16 b
•
0 likes•426 views
This document summarizes the specifications and features of the ST-16B oscilloscope. It is a small-scale oscilloscope that offers high trigger sensitivity and easy operation at a high performance to price ratio. Key specifications include a bandwidth of DC-10MHz, Y deflection range of 10mV/div to 10V/div, sweep rate of 0.1μs/div to 0.1s/div, and trigger sources of internal, external, and TV. Standard accessories include a power cord, 20MHz probe, and manual.
Report
Share
Report
Share
Download to read offline
Recommended
Htc oscilloscope st 16 a
This document provides the specifications for the ST-16A oscilloscope, including its bandwidth of DC to 10MHz, vertical deflection range of 10mV to 5V per division, sweep rate range of 200ms to 0.5us per division, and ability to trigger from either an internal or external source. Key features include a digital-code sweep switch, AC power supply of 200V, and standard accessories of a power cord, 20MHz probe, and manual. The dimensions are listed as 91 x 225 x 290mm.
RunnTech 3 Axis Multi functional Cobra Shaped Knob Joystick for Port Material...
RunnTech RT90 series multi-functional control with 6 switches (2x illuminating, 3x pushbuttons and 1x deadman trigger) and 1x proportional thumbwheel joystick controller for container reach stacker port material handling equipment (potentiometers outside-mounted type) with standard DB25 Male analog 25-pin Connector for serial connections.
Htc function generator fg 2002
The FG-2002 function generator produces sine, square, and triangle waveforms with frequencies from 0.2Hz to 2MHz and amplitudes from 0.9V to 10V without attenuation. It has a 5-digit LED display to simultaneously show output frequency and amplitude, and allows the duty cycle and width of output signals to be adjusted continuously.
Htc ac leakage current tester cl 2054
The CL-2054 is an AC leakage current tester with high resolution up to 10uA and a large LCD display. It can measure current from 40mA to 100A, voltage up to 400V, and resistance from 40Ω to 400Ω. Additional features include auto power off, data hold, overload protection, and low battery indication. Standard accessories include test leads, a soft carrying case, and manual. The dimensions are 209mm x 43mm x 30mm.
Htc analog multimeter yx 360 tre-b
This document summarizes the features and specifications of the YX-360TRE-B analog multimeter. It measures DC and AC voltage, resistance, current, and has additional functions like transistor testing and diode testing. It has multiple resistance ranges from 200 ohms to 20 megohms. The multimeter is portable, with dimensions of 148 by 100 by 35 mm, and includes standard accessories like test leads, a holster, and manual.
Htc digital multimeter dm 23
The DM-23 digital multimeter has a 41⁄2 digit LCD display with manual range selection and features measurements for voltage, current, resistance, capacitance, frequency, diode testing, and transistor testing. It has an input impedance of less than 30 ohms, can make 3 measurements per second, and operates on a 9V battery with low battery indication and auto power-off after 30 minutes of non-use. Standard accessories include test leads, a holster, and manual.
Addressable fire system pricelist(fw) vedard
This document provides pricing information for various addressable fire alarm system components from Vedard Security Alarm Technology, including smoke detectors, heat detectors, manual call points, sound and light sirens, input modules, isolator modules, input/output modules, fire repeater panels, programmers, and 1-loop and 2-loop fire alarm control panels. Prices range from $8-65 for individual components and $430-630 for fire alarm control panels depending on the number of detection points (loops).
Digital multimeter-htc-23
This document summarizes the features and specifications of the DM-23 digital multimeter. It can measure DC and AC voltage, current, resistance, capacitance, frequency and has additional functions like diode testing and continuity buzzer. It has a large LCD display, 20,000 count resolution, and safety features like input impedance protection and auto power off. Key specifications include measurement ranges from 200mV to 1000V for voltage and 200uA to 20A for current. It is powered by 9V battery and includes test leads, holster, and manual.
Recommended
Htc oscilloscope st 16 a
This document provides the specifications for the ST-16A oscilloscope, including its bandwidth of DC to 10MHz, vertical deflection range of 10mV to 5V per division, sweep rate range of 200ms to 0.5us per division, and ability to trigger from either an internal or external source. Key features include a digital-code sweep switch, AC power supply of 200V, and standard accessories of a power cord, 20MHz probe, and manual. The dimensions are listed as 91 x 225 x 290mm.
RunnTech 3 Axis Multi functional Cobra Shaped Knob Joystick for Port Material...
RunnTech RT90 series multi-functional control with 6 switches (2x illuminating, 3x pushbuttons and 1x deadman trigger) and 1x proportional thumbwheel joystick controller for container reach stacker port material handling equipment (potentiometers outside-mounted type) with standard DB25 Male analog 25-pin Connector for serial connections.
Htc function generator fg 2002
The FG-2002 function generator produces sine, square, and triangle waveforms with frequencies from 0.2Hz to 2MHz and amplitudes from 0.9V to 10V without attenuation. It has a 5-digit LED display to simultaneously show output frequency and amplitude, and allows the duty cycle and width of output signals to be adjusted continuously.
Htc ac leakage current tester cl 2054
The CL-2054 is an AC leakage current tester with high resolution up to 10uA and a large LCD display. It can measure current from 40mA to 100A, voltage up to 400V, and resistance from 40Ω to 400Ω. Additional features include auto power off, data hold, overload protection, and low battery indication. Standard accessories include test leads, a soft carrying case, and manual. The dimensions are 209mm x 43mm x 30mm.
Htc analog multimeter yx 360 tre-b
This document summarizes the features and specifications of the YX-360TRE-B analog multimeter. It measures DC and AC voltage, resistance, current, and has additional functions like transistor testing and diode testing. It has multiple resistance ranges from 200 ohms to 20 megohms. The multimeter is portable, with dimensions of 148 by 100 by 35 mm, and includes standard accessories like test leads, a holster, and manual.
Htc digital multimeter dm 23
The DM-23 digital multimeter has a 41⁄2 digit LCD display with manual range selection and features measurements for voltage, current, resistance, capacitance, frequency, diode testing, and transistor testing. It has an input impedance of less than 30 ohms, can make 3 measurements per second, and operates on a 9V battery with low battery indication and auto power-off after 30 minutes of non-use. Standard accessories include test leads, a holster, and manual.
Addressable fire system pricelist(fw) vedard
This document provides pricing information for various addressable fire alarm system components from Vedard Security Alarm Technology, including smoke detectors, heat detectors, manual call points, sound and light sirens, input modules, isolator modules, input/output modules, fire repeater panels, programmers, and 1-loop and 2-loop fire alarm control panels. Prices range from $8-65 for individual components and $430-630 for fire alarm control panels depending on the number of detection points (loops).
Digital multimeter-htc-23
This document summarizes the features and specifications of the DM-23 digital multimeter. It can measure DC and AC voltage, current, resistance, capacitance, frequency and has additional functions like diode testing and continuity buzzer. It has a large LCD display, 20,000 count resolution, and safety features like input impedance protection and auto power off. Key specifications include measurement ranges from 200mV to 1000V for voltage and 200uA to 20A for current. It is powered by 9V battery and includes test leads, holster, and manual.
Rolling Shutter UPS
The document describes an AC/DC Rolling Shutter UPS system that provides backup power to motors. The UPS has a long standby time of 100-200 hours, allowing it to power motors during electricity outages. It can be used for shutters, garage doors, automatic doors, and other applications with tube-shaped motors. The UPS has a compact design that allows for easy wall mounting. It also features remote controls, status displays, and protections for overloading and battery issues.
Htc digital multimeter dm 87
The DM-87 is a 41⁄2 digital multimeter that features various measurement functions including voltage, current, resistance, capacitance, frequency, temperature, and special functions like VSD testing and transistor testing. It has a large LCD display, data hold, max/min value hold, and auto power-off capabilities. Measurement ranges and basic accuracies are provided for each function. Standard accessories include test leads, battery, manual, temperature probe, and crocodile clip.
Htc digital multi meter dm 97
This document summarizes the specifications of the DM-97 digital multimeter. It can measure DC and AC voltage up to 1000V, DC and AC current up to 20A, resistance up to 40MΩ, capacitance up to 200uF, frequency up to 30MHz, temperature from -40 to 1000 degrees Celsius, and transistor gain. It has a 4000 count LCD display, data hold, max/min value hold, and auto power off after 30 minutes. Standard accessories include test leads, holster, manual, and temperature probe.
100-240VAC 1 channel 8W 0-10V constant current dimmable driver EUP8A-1W350C-0
100-240VAC 1 channel 8W 0-10V constant current dimmable driver EUP8A-1W350C-0Shanghai Euchips Industrial Co.,Ltd.
1. 1 channel constant current output.
2. 0-10V Dimmer control.
3. Drive capability: max 350mA.
4. Wide range voltage input 100VAC-240VAC
5. Max 8W powerPower Line Transducers
AC Voltage and AC Current Transducers find extensive use in monitoring Powerline parameters. Canopus Instruments offers the highly capable AC Voltage and Current Transducers. Order your machine now!
Visit:
http://www.canopusinstruments.com/product/industrial-automation-product/signal-conditioning-isolation/powerline-transducers-ac-voltage-current-converter-90-270vac-supply/
FTC968 - 968Z
The document provides technical specifications for the Nivector FTC968/FTC968Z capacitive point level switch, which is a maintenance-free level sensor for bulk solids up to 10mm in size, with no moving parts or contact with the product. It has adjustable sensitivity and switching modes, IP65/67 protection, and can directly connect to devices like contactors or valves, operating from -4 to 176°F and -14.5 to 87psi. Accessories include an optional protector for coarse materials and the sensor can be purchased for $158 for non-hazardous areas.
Htc electro magnetic field tester emf 522
The EMF-522 is an electromagnetic field tester with a 3.5 digit LCD display and 1999 count maximum. It measures electromagnetic fields from 30Hz to 300Hz with resolutions of 0.1/1mG or 0.01/0.1μT across ranges of 200/2000mG or 20/200μT. The EMF-522 has a single-axis sensor, ±(2.5%+6dgt) accuracy at 50/60Hz, and operates for approximately 100 hours on a 9V battery with dimensions of 130 x 56 x 38mm.
Catalog mikro mikro mk204a-dienhathe.vn
The document provides specifications for the MK204A overcurrent relay, including its ratings, auxiliary supply information, setting ranges, contact specifications, indicators, performance characteristics, mechanical details, environmental conditions, typical wiring diagram, and ordering information. The relay has adjustable settings for low-set and high-set overcurrent protection, with the low-set having an inverse definite time characteristic. It is intended for panel mounting and complies with relevant protection device standards.
Catalog mikro mikro mk203a-dienhathe.vn
The document provides technical specifications for an overcurrent relay rated for 5 amps at 50 Hz. It can monitor currents from 2.0 to 6.0 amps and has adjustable settings for time multiplier and high-set pickup. The relay has indicators and contacts for trip signaling and mounts in a 96x96mm panel. It is designed to protect electrical systems according to IEC standards and operate in temperatures from -5°C to 55°C.
RunnTech W100 Series Self-centering Hall Effect Proportional Thumbwheel Contr...
RunnTech W100 series thumbwheel controller is a revolutionary Hall effect control providing proportional control, can be used to install on the console alone, also can be installed in HD10 grip or armrest and panel mount integration.
Catalog bộ nguồn omron S8 FS-C Beeteco.com
This document describes Switch Mode Power Supply models ranging from 15W to 350W. It provides specifications for each model including input/output ratings, efficiency, protection features, construction details, and standards compliance. The power supplies offer high reliability and stable operation for equipment applications with output voltages of 5V, 12V, 15V, 24V, 36V or 48V.
Htc vibration meter vb 8205
The document describes the features and specifications of the VB-8205 vibration meter. It can measure acceleration, velocity, displacement, RPM, and frequency in both metric and imperial units. It has a 4-digit LCD display, auto power off, max hold, AC output for headphones/recording, and low battery indicator. Optional accessories include headphones, RS-232 communication cable and software. Standard accessories are a magnet, accelerometer, stinger probes, carrying case and manual.
RunnTech F100 Series Proportional Accelerator Pedal
RunnTech F100 Proportional Accelerator Pedal is mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
Htr india-products-current-sense-resistors-electron-beam-welded-heb-english.pdf
This document summarizes low ohm battery shunt resistors. It describes their open frame welded construction, power ratings from 6W to 36W, and resistance values from R00005 to R001. Key features include high pulse power ratings, temperature coefficients of less than 50 ppm/K, and operating temperatures from -40°C to +170°C. Dimensions and specifications are provided for sizes 8420 and 8518.
constant current led triac dimming driver
Golden Supplier 40-240VAC 350mA 1 channel Triac Constant Current Dimmable Driver DIM6001 with high quality and competitive price.
Htc insulation resistance tester 6250 in
The 6250IN insulation resistance tester has a 3 1/2 digit LCD display with backlight, data hold, and auto ranging functions. It can test insulation resistance from 0.1MΩ to 200GΩ at test voltages of 1000V, 2500V, and 5000V. It also tests AC voltage from 0-700V and phase sequence from 40-60Hz. Standard accessories include carrying case, test leads, and manual.
Htc digital clamp meter cm 2070c
The CM-2070C is a 3 1/2 digital clamp meter that can measure DC and AC voltage, current, resistance, temperature, and non-contact voltage. It has features like auto-ranging, backlight display, and protection from interference. The clamp meter has a 52mm jaw opening and can measure up to 1000A AC current, 1000V DC or AC voltage, and 20MΩ resistance, with accuracies between 0.5-2.0% of the reading. Standard accessories include test leads, battery, manual, and temperature probe.
Single Axis Fingertip Joystick | W200
RunnTech W200 Single Axis Fingertip Joystick is mainly used in hydraulic proportional control and variable frequency motor control, such as remote control chest packs and the control of construction, agricultural, material handling equipment or lifting equipment, etc.
Htc vibration meter vb 8205
Monarch Controls is located at M-414 1st Stage 8th Cross, Peenya Industrial Area, Bangalore-560058. Their phone numbers are 080-28395887 and 9902492929. Their email address is monarchcontrols@gmail.com.
Htc true rms digital clamp meter cm 2900r
This document summarizes the specifications of the CM-2900R True RMS Digital Clamp Meter. It can measure DC/AC voltage up to 1000V, DC/AC current up to 2000A, resistance up to 40MΩ, and frequency up to 1MHz. It has a 33⁄4 digit LCD display, 4000 count resolution, and CE CAT III 600V rating. Additional features include data hold, continuity and diode testing, auto/manual ranging, and low battery/overrange indicators. Standard accessories include test leads, carrying case, and manual.
Htc transistor tester tt 825
The TT-825 transistor tester features a 3 1/2 digit LCD display and can measure forward voltage, reverse voltage, forward saturation voltage drop, amplification factor, and reverse leakage current of various semiconductor components like diodes, transistors, SCRs, and FETs. It can also measure the rated working voltage of capacitors, the protection voltage of varistors, and the starting voltage of neon bulbs and lamps. The tester has a basic accuracy of less than 1mA for breakdown voltage measurements up to 1000V and 200V, and can measure currents up to 2000mA, 800mA, 100mA, 10mA, and 1mA with different ranges. It also measures the constant voltage value of 78xx and 79
Htc thermometer dt 302-1 & dt-302-2
The document describes two thermometer models, the DT-302-1 and DT-302-2. The DT-302-1 can measure a single thermocouple input between -50°C to 1300°C with a resolution of 0.1°C or 1°C, depending on the temperature range. The DT-302-2 can measure two thermocouple inputs by pressing the T1-T2 key and has a dual measurement range of -50°C to 1200°C and 1200°C to 1300°C, with accuracies of ±(0.3%+2°C) and ±(0.6%+2°C) respectively. Both models have a 3
More Related Content
What's hot
Rolling Shutter UPS
The document describes an AC/DC Rolling Shutter UPS system that provides backup power to motors. The UPS has a long standby time of 100-200 hours, allowing it to power motors during electricity outages. It can be used for shutters, garage doors, automatic doors, and other applications with tube-shaped motors. The UPS has a compact design that allows for easy wall mounting. It also features remote controls, status displays, and protections for overloading and battery issues.
Htc digital multimeter dm 87
The DM-87 is a 41⁄2 digital multimeter that features various measurement functions including voltage, current, resistance, capacitance, frequency, temperature, and special functions like VSD testing and transistor testing. It has a large LCD display, data hold, max/min value hold, and auto power-off capabilities. Measurement ranges and basic accuracies are provided for each function. Standard accessories include test leads, battery, manual, temperature probe, and crocodile clip.
Htc digital multi meter dm 97
This document summarizes the specifications of the DM-97 digital multimeter. It can measure DC and AC voltage up to 1000V, DC and AC current up to 20A, resistance up to 40MΩ, capacitance up to 200uF, frequency up to 30MHz, temperature from -40 to 1000 degrees Celsius, and transistor gain. It has a 4000 count LCD display, data hold, max/min value hold, and auto power off after 30 minutes. Standard accessories include test leads, holster, manual, and temperature probe.
100-240VAC 1 channel 8W 0-10V constant current dimmable driver EUP8A-1W350C-0
100-240VAC 1 channel 8W 0-10V constant current dimmable driver EUP8A-1W350C-0Shanghai Euchips Industrial Co.,Ltd.
1. 1 channel constant current output.
2. 0-10V Dimmer control.
3. Drive capability: max 350mA.
4. Wide range voltage input 100VAC-240VAC
5. Max 8W powerPower Line Transducers
AC Voltage and AC Current Transducers find extensive use in monitoring Powerline parameters. Canopus Instruments offers the highly capable AC Voltage and Current Transducers. Order your machine now!
Visit:
http://www.canopusinstruments.com/product/industrial-automation-product/signal-conditioning-isolation/powerline-transducers-ac-voltage-current-converter-90-270vac-supply/
FTC968 - 968Z
The document provides technical specifications for the Nivector FTC968/FTC968Z capacitive point level switch, which is a maintenance-free level sensor for bulk solids up to 10mm in size, with no moving parts or contact with the product. It has adjustable sensitivity and switching modes, IP65/67 protection, and can directly connect to devices like contactors or valves, operating from -4 to 176°F and -14.5 to 87psi. Accessories include an optional protector for coarse materials and the sensor can be purchased for $158 for non-hazardous areas.
Htc electro magnetic field tester emf 522
The EMF-522 is an electromagnetic field tester with a 3.5 digit LCD display and 1999 count maximum. It measures electromagnetic fields from 30Hz to 300Hz with resolutions of 0.1/1mG or 0.01/0.1μT across ranges of 200/2000mG or 20/200μT. The EMF-522 has a single-axis sensor, ±(2.5%+6dgt) accuracy at 50/60Hz, and operates for approximately 100 hours on a 9V battery with dimensions of 130 x 56 x 38mm.
Catalog mikro mikro mk204a-dienhathe.vn
The document provides specifications for the MK204A overcurrent relay, including its ratings, auxiliary supply information, setting ranges, contact specifications, indicators, performance characteristics, mechanical details, environmental conditions, typical wiring diagram, and ordering information. The relay has adjustable settings for low-set and high-set overcurrent protection, with the low-set having an inverse definite time characteristic. It is intended for panel mounting and complies with relevant protection device standards.
Catalog mikro mikro mk203a-dienhathe.vn
The document provides technical specifications for an overcurrent relay rated for 5 amps at 50 Hz. It can monitor currents from 2.0 to 6.0 amps and has adjustable settings for time multiplier and high-set pickup. The relay has indicators and contacts for trip signaling and mounts in a 96x96mm panel. It is designed to protect electrical systems according to IEC standards and operate in temperatures from -5°C to 55°C.
RunnTech W100 Series Self-centering Hall Effect Proportional Thumbwheel Contr...
RunnTech W100 series thumbwheel controller is a revolutionary Hall effect control providing proportional control, can be used to install on the console alone, also can be installed in HD10 grip or armrest and panel mount integration.
Catalog bộ nguồn omron S8 FS-C Beeteco.com
This document describes Switch Mode Power Supply models ranging from 15W to 350W. It provides specifications for each model including input/output ratings, efficiency, protection features, construction details, and standards compliance. The power supplies offer high reliability and stable operation for equipment applications with output voltages of 5V, 12V, 15V, 24V, 36V or 48V.
Htc vibration meter vb 8205
The document describes the features and specifications of the VB-8205 vibration meter. It can measure acceleration, velocity, displacement, RPM, and frequency in both metric and imperial units. It has a 4-digit LCD display, auto power off, max hold, AC output for headphones/recording, and low battery indicator. Optional accessories include headphones, RS-232 communication cable and software. Standard accessories are a magnet, accelerometer, stinger probes, carrying case and manual.
RunnTech F100 Series Proportional Accelerator Pedal
RunnTech F100 Proportional Accelerator Pedal is mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
Htr india-products-current-sense-resistors-electron-beam-welded-heb-english.pdf
This document summarizes low ohm battery shunt resistors. It describes their open frame welded construction, power ratings from 6W to 36W, and resistance values from R00005 to R001. Key features include high pulse power ratings, temperature coefficients of less than 50 ppm/K, and operating temperatures from -40°C to +170°C. Dimensions and specifications are provided for sizes 8420 and 8518.
constant current led triac dimming driver
Golden Supplier 40-240VAC 350mA 1 channel Triac Constant Current Dimmable Driver DIM6001 with high quality and competitive price.
Htc insulation resistance tester 6250 in
The 6250IN insulation resistance tester has a 3 1/2 digit LCD display with backlight, data hold, and auto ranging functions. It can test insulation resistance from 0.1MΩ to 200GΩ at test voltages of 1000V, 2500V, and 5000V. It also tests AC voltage from 0-700V and phase sequence from 40-60Hz. Standard accessories include carrying case, test leads, and manual.
Htc digital clamp meter cm 2070c
The CM-2070C is a 3 1/2 digital clamp meter that can measure DC and AC voltage, current, resistance, temperature, and non-contact voltage. It has features like auto-ranging, backlight display, and protection from interference. The clamp meter has a 52mm jaw opening and can measure up to 1000A AC current, 1000V DC or AC voltage, and 20MΩ resistance, with accuracies between 0.5-2.0% of the reading. Standard accessories include test leads, battery, manual, and temperature probe.
Single Axis Fingertip Joystick | W200
RunnTech W200 Single Axis Fingertip Joystick is mainly used in hydraulic proportional control and variable frequency motor control, such as remote control chest packs and the control of construction, agricultural, material handling equipment or lifting equipment, etc.
What's hot (18)
100-240VAC 1 channel 8W 0-10V constant current dimmable driver EUP8A-1W350C-0
100-240VAC 1 channel 8W 0-10V constant current dimmable driver EUP8A-1W350C-0
RunnTech W100 Series Self-centering Hall Effect Proportional Thumbwheel Contr...
RunnTech W100 Series Self-centering Hall Effect Proportional Thumbwheel Contr...
RunnTech F100 Series Proportional Accelerator Pedal
RunnTech F100 Series Proportional Accelerator Pedal
Htr india-products-current-sense-resistors-electron-beam-welded-heb-english.pdf
Htr india-products-current-sense-resistors-electron-beam-welded-heb-english.pdf
More from Monarch Controls
Htc vibration meter vb 8205
Monarch Controls is located at M-414 1st Stage 8th Cross, Peenya Industrial Area, Bangalore-560058. Their phone numbers are 080-28395887 and 9902492929. Their email address is monarchcontrols@gmail.com.
Htc true rms digital clamp meter cm 2900r
This document summarizes the specifications of the CM-2900R True RMS Digital Clamp Meter. It can measure DC/AC voltage up to 1000V, DC/AC current up to 2000A, resistance up to 40MΩ, and frequency up to 1MHz. It has a 33⁄4 digit LCD display, 4000 count resolution, and CE CAT III 600V rating. Additional features include data hold, continuity and diode testing, auto/manual ranging, and low battery/overrange indicators. Standard accessories include test leads, carrying case, and manual.
Htc transistor tester tt 825
The TT-825 transistor tester features a 3 1/2 digit LCD display and can measure forward voltage, reverse voltage, forward saturation voltage drop, amplification factor, and reverse leakage current of various semiconductor components like diodes, transistors, SCRs, and FETs. It can also measure the rated working voltage of capacitors, the protection voltage of varistors, and the starting voltage of neon bulbs and lamps. The tester has a basic accuracy of less than 1mA for breakdown voltage measurements up to 1000V and 200V, and can measure currents up to 2000mA, 800mA, 100mA, 10mA, and 1mA with different ranges. It also measures the constant voltage value of 78xx and 79
Htc thermometer dt 302-1 & dt-302-2
The document describes two thermometer models, the DT-302-1 and DT-302-2. The DT-302-1 can measure a single thermocouple input between -50°C to 1300°C with a resolution of 0.1°C or 1°C, depending on the temperature range. The DT-302-2 can measure two thermocouple inputs by pressing the T1-T2 key and has a dual measurement range of -50°C to 1200°C and 1200°C to 1300°C, with accuracies of ±(0.3%+2°C) and ±(0.6%+2°C) respectively. Both models have a 3
Htc thermo hygro meter 288-cth & 288-ath
This document provides specifications for two Hygrometers:
1. Indoor Thermometer-Hygrometer with Clock
Temperature range: 0°C to 50°C. Humidity range: 30-80% RH. Battery: AAA 1.5V.
2. Outdoor Thermometer-Hygrometer
Temperature range: -10°C to 40°C. Humidity range: 20-90% RH. Battery life: 1-2 years. Sensor length: 4 meters.
Both devices display temperature, humidity readings and have alarms. They include maximum and minimum temperature and humidity memory functions.
Htc thermo hygro meter 103-cth & 411-cth
The document describes two thermo-hygrometers, models 103-CTH and 411-CTH. Both devices measure temperature from -50 to 70 degrees Celsius, humidity from 10 to 99% RH, and keep maximum and minimum readings and time with an alarm clock. The 103-CTH has a larger display and measures temperature in Fahrenheit and Celsius, while the 411-CTH also displays comfort levels and measures humidity up to 90%. Both devices require AAA batteries and are distributed by Monarch Controls in Bangalore, India.
Htc thermo hygro meter 288-cth & 288-ath
The document describes two thermo-hygrometers: the 288-CTH and 288-ATH. The 288-CTH displays indoor temperature, humidity, and time with a range of 0-50°C and accuracy of ±1°C for temperature and ±8% for humidity. It also stores minimum and maximum readings. The 288-ATH adds an outdoor sensor that measures temperature from -20-70°C with ±1°C accuracy and humidity from 20-90% with ±5% accuracy from 40-80% humidity. Both devices use AAA batteries and display readings in °C or °F.
Htc thermohygro meter 288 cth & 288-ath
The document describes two thermo-hygrometers, the 288-CTH and 288-ATH. Both devices have large LCD displays to show temperature, humidity, and time readings, and can store minimum and maximum temperature and humidity values. The 288-CTH is for indoor use only and displays comfort levels, while the 288-ATH can also measure outdoor conditions and has a 3 meter sensor cable. The devices provide accurate temperature and humidity readings within specified ranges.
Htc thermhygro meter 103 cth & 411-cth
The document describes two thermo-hygrometers, models 103-CTH and 411-CTH, that measure temperature, humidity, and have clock functions. The 103-CTH has a large LCD display, measures temperature from -50 to 70 degrees Celsius, humidity from 10-99% RH, and stores min/max readings. The 411-CTH displays an environment comfort level, measures temperature from -20 to 70 degrees Celsius and humidity from 10-90% RH, and also stores min/max readings and has an alarm clock. Both devices use AAA batteries and provide readings in Fahrenheit and Celsius.
Htc test lead tl 1 temperature probe tp-1
Monarch Controls is located at M-414 1st Stage 8th Cross, Peenya Industrial Area, Bangalore-560058. Their phone numbers are 080-28395887 and 9902492929. The email address for contacting Monarch Controls is monarchcontrols@gmail.com.
Htc temperature calibrator cc 04
The CC-04 temperature calibrator can source and measure voltages from 0-10V and currents from 0-24mA with an accuracy of ±0.05%. It has a resolution of 1mV/0.01mV and 1uA and can source and measure over various ranges with input impedances of 1MΩ or 10Ω. Standard accessories include a soft carry case, battery charger, holster, test leads and manual, and it has dimensions of 195x92x55mm.
Htc temperature calibrator cc 01
The CC-01 is a thermocouple calibrator that can output voltages corresponding to different thermocouple types with an accuracy of ±0.02%. It has a range of -250°C to 1800°C, depending on the thermocouple, and can display in degrees Celsius or Fahrenheit with resolutions of 0.1°C or 1°C. Standard accessories include a temperature probe, briefcase, and manual, and it has dimensions of 190 x 89 x 42 mm.
Htc temperature calibrator cc 01 (2)
This document summarizes the features and specifications of the CC-01 Temperature Calibrator. It has a 4-digit LCD display, auto power off function, and accuracy of +0.05%. It can output voltages from -10mV to 1100mV, resistances from 0-400Ω, and temperatures for various thermocouples and thermoresistances from -200°C to 1800°C according to ITS-90 standards. Standard accessories include test leads, a holster, and manual. Its dimensions are 155mm x 75mm x 33mm.
Htc sound level meter sl 1352
The SL-1352 sound level meter has features for MAX, MIN, and over/under range measurements with A-weighting and C-weighting. It has FAST and SLOW time response settings and can output data to a frequency analyzer or recorder. Additional features include a datalogger function, adjustable alarms, a backlight, and a USB computer interface. It has a wide frequency and dynamic range, level ranges from 30 to 130 dB, and provides readings every 2 seconds on its display. Power comes from a 9V battery or supply and it includes a carrying case and accessories.
Htc rtd calibrator cc 02
The document describes an RTD calibrator device with the following key specifications:
- It can measure and simulate resistance values from 0-3200 ohms with an accuracy of +/- 0.02%.
- It supports several common RTD sensor types like PT100, PT200, PT500 with temperature measurement ranges from -200C to 800C and accuracies ranging from 0.3-1.5C.
- Additional features include adjustable current excitation from 0.05-3mA depending on the resistance range.
- Standard accessories include test leads, holster, and manual. Its dimensions are 190x89x42mm.
Htc rh temp data logger easy log
The RH-Temp Data Logger is a compact device that measures and logs relative humidity and temperature over long periods of time. It can store up to 32,700 readings with measurement intervals as short as 1 second. The large LCD display shows logging information and two LEDs indicate alarm and recording status. Analysis software displays the logged data graphically or as text. It has a battery life of over 3 years and connects to a computer via USB to download the stored measurements.
Htc power monitor
Monarch Controls is located at M-414 1st Stage 8th Cross, Peenya Industrial Area, Bangalore-560058. Their phone numbers are 080-28395887 and 9902492929. The email address for contacting Monarch Controls is monarchcontrols@gmail.com.
Htc pen rc meter for smd smd tester
This document describes a pen R/C meter that can be used to test SMD components and identify diodes, capacitors, and resistors. It has features like auto power off and low battery indication. The meter measures capacitance from 4nF to 100μF and resistance from 4000Ω to 40MΩ with basic accuracies ranging from ±(1.2% +2) to ±(5.0% +5). It comes with a manual and has dimensions of 180mm x 35mm x 18mm.
More from Monarch Controls (20)
Htc oscilloscope st 16 b
- 1. Oscilloscope ST-16B Feature : • Small Scale • High Trig Sensitivity • Easy to Operate • High Performance / Price Ratio • Power Supply : AC 200 ±10%V Specification : • Band Width DC ~ 10MHz (3db) • Y Deflection 10mV / div ~ 10V / div ±5% • Sweep Rate 0.1μs / div ~ 0.1s / div ±5% • Trig Source Int., Ext., TV • Ext. Trig Max. Input 400V (DC + AC peak) ≤1KHz • Trig Mode Normal, Auto, TV, Lock • X-Y Deflection 0.2V / div ~ 0.5V / div ● Wave Rectangle • Amplitude 0.5V ±2% ● Frequency 1kHz ±2% • Standard Accessory : Power Chord, 20MHz Oscilloscope Probe, Manual • Dimensions : 190 x 140 x 270mm HEAD OFFICE : Monarch Controls, M-414 1st Stage 8th Cross, Peenya Industrial Area, Bangalore-560058. Phone: 080-28395887 / 9902492929 Email: monarchcontrols@gmail.com