Diffraction through Gaps, At Edges and Transmission.ppt
•Download as PPT, PDF•
0 likes•22 views
Diffraction is the spreading out of waves at edges and gaps. The amount of diffraction depends on the size of the gap and the wavelength - diffraction is greater when the gap size is similar to the wavelength. For diffraction of light to occur through a gap, the gap needs to be very small since the wavelength of light is small. For diffraction of radio waves around hills, long wavelength radio waves will diffract more than short wavelengths.
Report
Share
Report
Share
Recommended
St_unit_Intro_to_Acoustics.pptx
The document provides an overview of acoustics and architectural acoustics. It discusses key topics such as the physics of sound including amplitude, frequency, wavelength, velocity of sound and more. It also covers how sound behaves in an enclosed space through reflection, absorption, diffraction and other phenomena. The document outlines criteria for acoustic environments including reverberation time, speech intelligibility, and discusses echo and how to reduce it.
St_unit_Intro_to_Acoustics.pptx
An auditorium is designed based on the function itself. For example: Dewan Agong Tuanku Canselor UiTM, that is a multi-purpose auditoria which indicates both functions; speech and also music purposes. It depends on the event that will be held in the auditorium. The design of the auditorium must comprises of both functions in order to have a good room acoustic. In addition, it must be work out for changes.
Sound Energy
Sound is produced by vibrating objects and travels as longitudinal waves through air and other materials. A sound wave consists of alternating compressions and rarefactions that propagate in the direction of wave travel. The human range of hearing is typically 20 Hz to 20,000 Hz, though this decreases with age or exposure to loud sounds. Ultrasound and infrasound refer to frequencies above and below this audible range. Sound travels fastest through solids and slowest through gases, with the speed increasing with temperature.
Acoustic
Notes for Architecture 4th Year subject Services. The topic is about Acoustic, how does it work for different places, how we can treat spaces according to acoustic and for better acoustic
Sound
Sound is traveling compressed air or other material that transfers energy. It has properties like amplitude (volume), wavelength (distance between compressed regions), and frequency (number of wavelengths passing a point over time). Ultrasound refers to sounds above the normal human hearing range. Bats and ultrasonic sensors use ultrasound for echolocation to detect distant objects by sending out sound waves and receiving the echo. The speed of sound is approximately 340 m/s.
ut1
The document discusses ultrasonic testing principles including:
- The 9.5 day course aims to train participants to obtain skills and knowledge for ultrasonic testing certification.
- Basic ultrasonic testing principles are explained such as how sound is transmitted through materials and defects are detected based on differences in signal travel time.
- Key concepts around sound waves, frequency, wavelength, velocity and their relationships are defined in the context of ultrasonic testing.
Ut P1.Ppt(New)
The document discusses the basics of ultrasonic testing including:
- A 9.5 day course to train participants in ultrasonic testing and prepare them for examinations.
- Common NDT methods and that the best method depends on various factors and conditions.
- Basic principles of ultrasonic testing including transmitting sound through a material and detecting reflections with a probe and flaw detector.
- Key concepts like frequency, wavelength, velocity and their relationships. Higher frequency means smaller wavelength.
- The beam spread and near field characteristics affecting sensitivity and detection capabilities. Higher frequency and larger probes result in smaller near and far zones.
Ut P1.Ppt(New)
The document discusses ultrasonic testing principles including:
- The 9.5 day course aims to train participants to obtain skills and knowledge for ultrasonic testing certification.
- Basic ultrasonic testing principles are explained such as how sound is transmitted through materials and defects are detected based on differences in signal travel time.
- Key concepts around sound waves, frequency, wavelength, velocity and their relationships are defined in the context of ultrasonic testing.
Recommended
St_unit_Intro_to_Acoustics.pptx
The document provides an overview of acoustics and architectural acoustics. It discusses key topics such as the physics of sound including amplitude, frequency, wavelength, velocity of sound and more. It also covers how sound behaves in an enclosed space through reflection, absorption, diffraction and other phenomena. The document outlines criteria for acoustic environments including reverberation time, speech intelligibility, and discusses echo and how to reduce it.
St_unit_Intro_to_Acoustics.pptx
An auditorium is designed based on the function itself. For example: Dewan Agong Tuanku Canselor UiTM, that is a multi-purpose auditoria which indicates both functions; speech and also music purposes. It depends on the event that will be held in the auditorium. The design of the auditorium must comprises of both functions in order to have a good room acoustic. In addition, it must be work out for changes.
Sound Energy
Sound is produced by vibrating objects and travels as longitudinal waves through air and other materials. A sound wave consists of alternating compressions and rarefactions that propagate in the direction of wave travel. The human range of hearing is typically 20 Hz to 20,000 Hz, though this decreases with age or exposure to loud sounds. Ultrasound and infrasound refer to frequencies above and below this audible range. Sound travels fastest through solids and slowest through gases, with the speed increasing with temperature.
Acoustic
Notes for Architecture 4th Year subject Services. The topic is about Acoustic, how does it work for different places, how we can treat spaces according to acoustic and for better acoustic
Sound
Sound is traveling compressed air or other material that transfers energy. It has properties like amplitude (volume), wavelength (distance between compressed regions), and frequency (number of wavelengths passing a point over time). Ultrasound refers to sounds above the normal human hearing range. Bats and ultrasonic sensors use ultrasound for echolocation to detect distant objects by sending out sound waves and receiving the echo. The speed of sound is approximately 340 m/s.
ut1
The document discusses ultrasonic testing principles including:
- The 9.5 day course aims to train participants to obtain skills and knowledge for ultrasonic testing certification.
- Basic ultrasonic testing principles are explained such as how sound is transmitted through materials and defects are detected based on differences in signal travel time.
- Key concepts around sound waves, frequency, wavelength, velocity and their relationships are defined in the context of ultrasonic testing.
Ut P1.Ppt(New)
The document discusses the basics of ultrasonic testing including:
- A 9.5 day course to train participants in ultrasonic testing and prepare them for examinations.
- Common NDT methods and that the best method depends on various factors and conditions.
- Basic principles of ultrasonic testing including transmitting sound through a material and detecting reflections with a probe and flaw detector.
- Key concepts like frequency, wavelength, velocity and their relationships. Higher frequency means smaller wavelength.
- The beam spread and near field characteristics affecting sensitivity and detection capabilities. Higher frequency and larger probes result in smaller near and far zones.
Ut P1.Ppt(New)
The document discusses ultrasonic testing principles including:
- The 9.5 day course aims to train participants to obtain skills and knowledge for ultrasonic testing certification.
- Basic ultrasonic testing principles are explained such as how sound is transmitted through materials and defects are detected based on differences in signal travel time.
- Key concepts around sound waves, frequency, wavelength, velocity and their relationships are defined in the context of ultrasonic testing.
Ut P1.Ppt(New)
The document discusses the basics of ultrasonic testing including:
- A 9.5 day course to train participants in ultrasonic testing and prepare them for examinations.
- Common NDT methods and that the best method depends on various factors and conditions.
- Basic principles of ultrasonic testing including transmitting sound through materials to detect defects based on differences in signal return times.
- Key concepts in ultrasonic testing like frequency, wavelength, velocity and their relationships.
production of ultrasound and physical characteristics-
This document provides information on ultrasound physics principles including:
- Ultrasound is generated by piezoelectric crystals that oscillate when electric current is applied, transmitting sound waves. Returning echoes generate a current for imaging.
- Key ultrasound wave properties include amplitude, wavelength, frequency and velocity which impact tissue penetration and resolution.
- Tissue interactions include reflection, scattering, refraction and absorption which are used to visualize internal structures. Acoustic impedance differences cause reflections at boundaries.
- Transducers come in various designs like linear and curvilinear arrays to provide different field of views and resolutions based on application. Controls like power, gain and time gain affect the ultrasound image quality.
Characteristics of Waves
Waves transfer energy and have characteristics like amplitude, wavelength, frequency, and period. The principle of superposition means waves can interfere and add or subtract from each other. Sound waves are longitudinal waves that propagate through air and other materials. The Doppler effect causes changes in the perceived frequency of sound waves due to the motion of the source.
Acoustics
WHAT IS ACOUSTICS? what is sound? AMPLITUDE AND VOLUME, FREQUENCY AND PITCH
LOUDNESS OR INTENSITY
LOUDNESS OR INTENSITY
LOUDNESS OR INTENSITY, TIMBRE
VELOCITY OF SOUND
AMPLITUDE
REFLECTION
Wavesppt
Waves transfer energy from one place to another through repeated vibrations. There are two main types of waves - transverse waves where the vibrations are perpendicular to the direction of travel, and longitudinal waves where the vibrations are parallel. Waves can be described using terms like amplitude, wavelength, frequency, period and speed. Waves reflect when they hit obstacles and refract when changing speed in different mediums. The electromagnetic spectrum ranges from gamma rays to radio waves, with visible light in between. All electromagnetic waves travel at the speed of light and have wave-like properties.
USphysics.pptx
Ultrasound physics document summarized in 3 sentences:
Ultrasound uses high frequency sound waves to image inside the body, with the speed of sound determining wavelength and frequency affecting penetration depth and resolution. Sound is transmitted and received by transducers using the piezoelectric effect, and reflected at tissue interfaces to form 2D images showing anatomical structures. Factors such as absorption, scattering, and impedance determine the interaction of ultrasound with different tissues.
Acoustics_architecture_corporate interiors
The document discusses the physics of sound. It defines sound as a pressure wave that travels faster through solids than liquids or gases. Sound waves are longitudinal waves that create compressions and rarefactions. The key characteristics of a sound wave are its frequency, amplitude, wavelength, and speed. Frequency is measured in Hertz and determines the pitch of a sound. Amplitude determines loudness. Wavelength is the distance between compressions or rarefactions. Sound waves can be reflected, transmitted, absorbed, or cause diffraction or reverberation when interacting with surfaces. The range of normal human hearing is between 20-20,000 Hz. Different materials are used to absorb sound like porous absorbers, panel absorbers, and resonators
Difraction
Diffraction is the spreading out of waves when they move through a gap or around an obstacle. It occurs when the size of the opening or obstacle is comparable to the wavelength of the wave. Some key points:
- Diffraction causes the direction and shape of waves to change while their wavelength, frequency, and speed remain the same.
- For water waves, diffraction is more obvious with a small slit versus a large slit, as the waves are more circular around a small slit.
- For light waves, diffraction patterns like bright and dark fringes can be observed using a pinhole or single slit, but the effect is less obvious due to light's small wavelength.
- Experiments show greater diffraction for smaller
Radio and Radar: Radio
1. Radio uses electromagnetic waves to transmit signals through air using a transmitter and receiver. Sound is converted to electromagnetic waves using modulation like AM and FM.
2. A radio receiver receives radio waves via an antenna and converts them back into audio using demodulation after tuning, amplification and detection stages. Superheterodyne receivers improve reception by translating the radio frequency to an intermediate frequency using beat frequencies.
3. FM receivers use a discriminator circuit for demodulation instead of a detector, as it is better for detecting small frequency differences representing the audio signal.
Sound
Sound is produced by vibration and travels as compressions and rarefactions through a medium. It has characteristics like wavelength, amplitude, frequency, and speed. Sound reflects off surfaces, causing echoes, and reverberates through overlapping reflections. Humans can hear sounds from 20 Hz to 20 kHz, while ultrasound above this range has medical and industrial uses.
Sound
we hear many type of sound from various sources like humans, birds, bells, machines, vehicles, televisions, radios, etc. Sound is a form of energy which produces a sensation of hearing in our ears.
The presentation which increases your knowledge about sound.
by Mohammad Ali.
Wave equation (speed, wavelength & frequency
This document provides information about wave equations and wave properties. It defines key wave terms like amplitude, wavelength, frequency, period, and speed. It presents the wave equation relating these properties (speed = wavelength x frequency). Examples demonstrate using the wave equation to calculate speed, wavelength, or frequency given values for the other two properties. Sample problems are worked through applying the wave equation to different wave scenarios.
Room acoustics
Sound can propagate as longitudinal waves through air and solids, and as transverse waves through solids. The velocity of sound in air depends on temperature. Common units used to measure sound include decibels (loudness), hertz (frequency), and sone and phon (perceived loudness). Sound reflects off hard surfaces similarly to light, while diffraction causes bending around obstacles. The amount of sound absorbed versus reflected by a material is quantified by its absorption coefficient. Reverberation is the prolongation of sound after the source stops due to reflections, and reverberation time is used to characterize how long reflections are audible in a space.
Sound.pptx
This document discusses sound and sound waves. It describes sound as a longitudinal wave that needs a medium like air, water or solid material to transmit vibrations from one place to another. The speed of sound depends on factors like temperature but is typically around 330 meters/second in dry air. Pitch is determined by frequency of vibrations and loudness by amplitude. Sound can be reflected as echoes. Ultrasound refers to frequencies above the normal human hearing range of 20-20,000 Hz.
sound.pptx
Sound is produced by vibrating objects and travels as longitudinal waves through a medium such as air, water or solid materials. The key properties of sound waves are frequency, wavelength, loudness, intensity and pitch. Frequency determines pitch, with higher frequencies producing higher pitches. Loudness depends on amplitude of vibration, while intensity combines amplitude and area of the vibrating body. Temperature affects the speed of sound, with higher temperatures allowing faster molecular vibration and greater speed of transmission.
PROPERTIES_OF_WAVES.pptxihbgbgybihkgbyhhhhb
Waves can be described in terms of their speed, amplitude, wavelength, frequency, and period. Transverse waves move perpendicular to their direction of propagation, while longitudinal waves move parallel. Wave speed depends on the medium, and waves can change speed and wavelength at material boundaries due to refraction. Reflection occurs when waves bounce off barriers, obeying the law of equal angles. Diffraction is the spreading of waves when passing through openings, with greater diffraction for larger wavelengths.
Sonido explicación,con tiempo
This document discusses sound waves and the velocity of sound in different mediums. It defines sound as a longitudinal mechanical wave where particles of the medium vibrate in the direction of wave propagation. The frequency range of audible sound for humans is defined as 20 to 20,000 Hertz. The velocity of sound depends on the elasticity and density of the medium and varies by temperature in air. Several examples are provided to demonstrate calculations of sound velocity using given formulas and values. Phenomena related to sound waves like reflection, refraction, diffraction, and interference are also explained.
Physics copy-120407040751-phpapp01
- A wave is a repeating disturbance that transfers energy through matter or space by causing particles to vibrate and bump into nearby particles, transferring the energy (first 3 sentences).
- Sound is a form of energy caused by vibrations that transfers through longitudinal waves, affecting particle pressure. It can be reflected, refracted, absorbed, and exhibits interference and diffraction (next 3 sentences).
- The speed of sound depends on the medium and temperature, and the Doppler effect occurs when the frequency changes due to a moving source (last 2 sentences).
Properties of sound 2017
Sound is created by vibrations traveling through a medium as longitudinal waves. The properties of sound waves, including their amplitude, frequency, wavelength, and velocity, determine characteristics like volume, pitch, and ability to reflect or absorb. Sound propagation principles state that sound energy is transferred via compression and rarefaction waves, and factors like medium, weather conditions, obstacles, and open or enclosed spaces affect how far sound travels from its source.
Year 9 Physics Term 2 Lesson Presentation Week 1.pptx
- Sound waves are produced when air molecules are close together or far apart, forming regions of high and low pressure. An oscilloscope can be used to visualize sound waves by connecting a microphone to it.
- The amplitude, or height, of sound waves determines their loudness. A louder sound has higher amplitude as seen on an oscilloscope. While sound waves spread out as they travel away from their source, losing some energy to the medium.
- An amplifier increases the amplitude of a sound signal from a microphone to make the sound louder when played through a loudspeaker, allowing a singer to be heard in a large concert hall. The pitch of a sound depends on its frequency, measured in hertz (Hz
Compexometric titration/Chelatorphy titration/chelating titration
Classification
Metal ion ion indicators
Masking and demasking reagents
Estimation of Magnisium sulphate
Calcium gluconate
Complexometric Titration/ chelatometry titration/chelating titration, introduction, Types-
1.Direct Titration
2.Back Titration
3.Replacement Titration
4.Indirect Titration
Masking agent, Demasking agents
formation of complex
comparition between masking and demasking agents,
Indicators/Metal ion indicators/ Metallochromic indicators/pM indicators,
Visual Technique,PM indicators (metallochromic), Indicators of pH, Redox Indicators
Instrumental Techniques-Photometry
Potentiometry
Miscellaneous methods.
Complex titration with EDTA.
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
More Related Content
Similar to Diffraction through Gaps, At Edges and Transmission.ppt
Ut P1.Ppt(New)
The document discusses the basics of ultrasonic testing including:
- A 9.5 day course to train participants in ultrasonic testing and prepare them for examinations.
- Common NDT methods and that the best method depends on various factors and conditions.
- Basic principles of ultrasonic testing including transmitting sound through materials to detect defects based on differences in signal return times.
- Key concepts in ultrasonic testing like frequency, wavelength, velocity and their relationships.
production of ultrasound and physical characteristics-
This document provides information on ultrasound physics principles including:
- Ultrasound is generated by piezoelectric crystals that oscillate when electric current is applied, transmitting sound waves. Returning echoes generate a current for imaging.
- Key ultrasound wave properties include amplitude, wavelength, frequency and velocity which impact tissue penetration and resolution.
- Tissue interactions include reflection, scattering, refraction and absorption which are used to visualize internal structures. Acoustic impedance differences cause reflections at boundaries.
- Transducers come in various designs like linear and curvilinear arrays to provide different field of views and resolutions based on application. Controls like power, gain and time gain affect the ultrasound image quality.
Characteristics of Waves
Waves transfer energy and have characteristics like amplitude, wavelength, frequency, and period. The principle of superposition means waves can interfere and add or subtract from each other. Sound waves are longitudinal waves that propagate through air and other materials. The Doppler effect causes changes in the perceived frequency of sound waves due to the motion of the source.
Acoustics
WHAT IS ACOUSTICS? what is sound? AMPLITUDE AND VOLUME, FREQUENCY AND PITCH
LOUDNESS OR INTENSITY
LOUDNESS OR INTENSITY
LOUDNESS OR INTENSITY, TIMBRE
VELOCITY OF SOUND
AMPLITUDE
REFLECTION
Wavesppt
Waves transfer energy from one place to another through repeated vibrations. There are two main types of waves - transverse waves where the vibrations are perpendicular to the direction of travel, and longitudinal waves where the vibrations are parallel. Waves can be described using terms like amplitude, wavelength, frequency, period and speed. Waves reflect when they hit obstacles and refract when changing speed in different mediums. The electromagnetic spectrum ranges from gamma rays to radio waves, with visible light in between. All electromagnetic waves travel at the speed of light and have wave-like properties.
USphysics.pptx
Ultrasound physics document summarized in 3 sentences:
Ultrasound uses high frequency sound waves to image inside the body, with the speed of sound determining wavelength and frequency affecting penetration depth and resolution. Sound is transmitted and received by transducers using the piezoelectric effect, and reflected at tissue interfaces to form 2D images showing anatomical structures. Factors such as absorption, scattering, and impedance determine the interaction of ultrasound with different tissues.
Acoustics_architecture_corporate interiors
The document discusses the physics of sound. It defines sound as a pressure wave that travels faster through solids than liquids or gases. Sound waves are longitudinal waves that create compressions and rarefactions. The key characteristics of a sound wave are its frequency, amplitude, wavelength, and speed. Frequency is measured in Hertz and determines the pitch of a sound. Amplitude determines loudness. Wavelength is the distance between compressions or rarefactions. Sound waves can be reflected, transmitted, absorbed, or cause diffraction or reverberation when interacting with surfaces. The range of normal human hearing is between 20-20,000 Hz. Different materials are used to absorb sound like porous absorbers, panel absorbers, and resonators
Difraction
Diffraction is the spreading out of waves when they move through a gap or around an obstacle. It occurs when the size of the opening or obstacle is comparable to the wavelength of the wave. Some key points:
- Diffraction causes the direction and shape of waves to change while their wavelength, frequency, and speed remain the same.
- For water waves, diffraction is more obvious with a small slit versus a large slit, as the waves are more circular around a small slit.
- For light waves, diffraction patterns like bright and dark fringes can be observed using a pinhole or single slit, but the effect is less obvious due to light's small wavelength.
- Experiments show greater diffraction for smaller
Radio and Radar: Radio
1. Radio uses electromagnetic waves to transmit signals through air using a transmitter and receiver. Sound is converted to electromagnetic waves using modulation like AM and FM.
2. A radio receiver receives radio waves via an antenna and converts them back into audio using demodulation after tuning, amplification and detection stages. Superheterodyne receivers improve reception by translating the radio frequency to an intermediate frequency using beat frequencies.
3. FM receivers use a discriminator circuit for demodulation instead of a detector, as it is better for detecting small frequency differences representing the audio signal.
Sound
Sound is produced by vibration and travels as compressions and rarefactions through a medium. It has characteristics like wavelength, amplitude, frequency, and speed. Sound reflects off surfaces, causing echoes, and reverberates through overlapping reflections. Humans can hear sounds from 20 Hz to 20 kHz, while ultrasound above this range has medical and industrial uses.
Sound
we hear many type of sound from various sources like humans, birds, bells, machines, vehicles, televisions, radios, etc. Sound is a form of energy which produces a sensation of hearing in our ears.
The presentation which increases your knowledge about sound.
by Mohammad Ali.
Wave equation (speed, wavelength & frequency
This document provides information about wave equations and wave properties. It defines key wave terms like amplitude, wavelength, frequency, period, and speed. It presents the wave equation relating these properties (speed = wavelength x frequency). Examples demonstrate using the wave equation to calculate speed, wavelength, or frequency given values for the other two properties. Sample problems are worked through applying the wave equation to different wave scenarios.
Room acoustics
Sound can propagate as longitudinal waves through air and solids, and as transverse waves through solids. The velocity of sound in air depends on temperature. Common units used to measure sound include decibels (loudness), hertz (frequency), and sone and phon (perceived loudness). Sound reflects off hard surfaces similarly to light, while diffraction causes bending around obstacles. The amount of sound absorbed versus reflected by a material is quantified by its absorption coefficient. Reverberation is the prolongation of sound after the source stops due to reflections, and reverberation time is used to characterize how long reflections are audible in a space.
Sound.pptx
This document discusses sound and sound waves. It describes sound as a longitudinal wave that needs a medium like air, water or solid material to transmit vibrations from one place to another. The speed of sound depends on factors like temperature but is typically around 330 meters/second in dry air. Pitch is determined by frequency of vibrations and loudness by amplitude. Sound can be reflected as echoes. Ultrasound refers to frequencies above the normal human hearing range of 20-20,000 Hz.
sound.pptx
Sound is produced by vibrating objects and travels as longitudinal waves through a medium such as air, water or solid materials. The key properties of sound waves are frequency, wavelength, loudness, intensity and pitch. Frequency determines pitch, with higher frequencies producing higher pitches. Loudness depends on amplitude of vibration, while intensity combines amplitude and area of the vibrating body. Temperature affects the speed of sound, with higher temperatures allowing faster molecular vibration and greater speed of transmission.
PROPERTIES_OF_WAVES.pptxihbgbgybihkgbyhhhhb
Waves can be described in terms of their speed, amplitude, wavelength, frequency, and period. Transverse waves move perpendicular to their direction of propagation, while longitudinal waves move parallel. Wave speed depends on the medium, and waves can change speed and wavelength at material boundaries due to refraction. Reflection occurs when waves bounce off barriers, obeying the law of equal angles. Diffraction is the spreading of waves when passing through openings, with greater diffraction for larger wavelengths.
Sonido explicación,con tiempo
This document discusses sound waves and the velocity of sound in different mediums. It defines sound as a longitudinal mechanical wave where particles of the medium vibrate in the direction of wave propagation. The frequency range of audible sound for humans is defined as 20 to 20,000 Hertz. The velocity of sound depends on the elasticity and density of the medium and varies by temperature in air. Several examples are provided to demonstrate calculations of sound velocity using given formulas and values. Phenomena related to sound waves like reflection, refraction, diffraction, and interference are also explained.
Physics copy-120407040751-phpapp01
- A wave is a repeating disturbance that transfers energy through matter or space by causing particles to vibrate and bump into nearby particles, transferring the energy (first 3 sentences).
- Sound is a form of energy caused by vibrations that transfers through longitudinal waves, affecting particle pressure. It can be reflected, refracted, absorbed, and exhibits interference and diffraction (next 3 sentences).
- The speed of sound depends on the medium and temperature, and the Doppler effect occurs when the frequency changes due to a moving source (last 2 sentences).
Properties of sound 2017
Sound is created by vibrations traveling through a medium as longitudinal waves. The properties of sound waves, including their amplitude, frequency, wavelength, and velocity, determine characteristics like volume, pitch, and ability to reflect or absorb. Sound propagation principles state that sound energy is transferred via compression and rarefaction waves, and factors like medium, weather conditions, obstacles, and open or enclosed spaces affect how far sound travels from its source.
Year 9 Physics Term 2 Lesson Presentation Week 1.pptx
- Sound waves are produced when air molecules are close together or far apart, forming regions of high and low pressure. An oscilloscope can be used to visualize sound waves by connecting a microphone to it.
- The amplitude, or height, of sound waves determines their loudness. A louder sound has higher amplitude as seen on an oscilloscope. While sound waves spread out as they travel away from their source, losing some energy to the medium.
- An amplifier increases the amplitude of a sound signal from a microphone to make the sound louder when played through a loudspeaker, allowing a singer to be heard in a large concert hall. The pitch of a sound depends on its frequency, measured in hertz (Hz
Similar to Diffraction through Gaps, At Edges and Transmission.ppt (20)
production of ultrasound and physical characteristics-
production of ultrasound and physical characteristics-
Year 9 Physics Term 2 Lesson Presentation Week 1.pptx
Year 9 Physics Term 2 Lesson Presentation Week 1.pptx
Recently uploaded
Compexometric titration/Chelatorphy titration/chelating titration
Classification
Metal ion ion indicators
Masking and demasking reagents
Estimation of Magnisium sulphate
Calcium gluconate
Complexometric Titration/ chelatometry titration/chelating titration, introduction, Types-
1.Direct Titration
2.Back Titration
3.Replacement Titration
4.Indirect Titration
Masking agent, Demasking agents
formation of complex
comparition between masking and demasking agents,
Indicators/Metal ion indicators/ Metallochromic indicators/pM indicators,
Visual Technique,PM indicators (metallochromic), Indicators of pH, Redox Indicators
Instrumental Techniques-Photometry
Potentiometry
Miscellaneous methods.
Complex titration with EDTA.
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
Context. With a mass exceeding several 104 M⊙ and a rich and dense population of massive stars, supermassive young star clusters
represent the most massive star-forming environment that is dominated by the feedback from massive stars and gravitational interactions
among stars.
Aims. In this paper we present the Extended Westerlund 1 and 2 Open Clusters Survey (EWOCS) project, which aims to investigate
the influence of the starburst environment on the formation of stars and planets, and on the evolution of both low and high mass stars.
The primary targets of this project are Westerlund 1 and 2, the closest supermassive star clusters to the Sun.
Methods. The project is based primarily on recent observations conducted with the Chandra and JWST observatories. Specifically,
the Chandra survey of Westerlund 1 consists of 36 new ACIS-I observations, nearly co-pointed, for a total exposure time of 1 Msec.
Additionally, we included 8 archival Chandra/ACIS-S observations. This paper presents the resulting catalog of X-ray sources within
and around Westerlund 1. Sources were detected by combining various existing methods, and photon extraction and source validation
were carried out using the ACIS-Extract software.
Results. The EWOCS X-ray catalog comprises 5963 validated sources out of the 9420 initially provided to ACIS-Extract, reaching a
photon flux threshold of approximately 2 × 10−8 photons cm−2
s
−1
. The X-ray sources exhibit a highly concentrated spatial distribution,
with 1075 sources located within the central 1 arcmin. We have successfully detected X-ray emissions from 126 out of the 166 known
massive stars of the cluster, and we have collected over 71 000 photons from the magnetar CXO J164710.20-455217.
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
The technology uses reclaimed CO₂ as the dyeing medium in a closed loop process. When pressurized, CO₂ becomes supercritical (SC-CO₂). In this state CO₂ has a very high solvent power, allowing the dye to dissolve easily.
8.Isolation of pure cultures and preservation of cultures.pdf
Isolation of pure culture, its various method.
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...Abdul Wali Khan University Mardan,kP,Pakistan
hematic appreciation test is a psychological assessment tool used to measure an individual's appreciation and understanding of specific themes or topics. This test helps to evaluate an individual's ability to connect different ideas and concepts within a given theme, as well as their overall comprehension and interpretation skills. The results of the test can provide valuable insights into an individual's cognitive abilities, creativity, and critical thinking skills在线办理(salfor毕业证书)索尔福德大学毕业证毕业完成信一模一样
学校原件一模一样【微信：741003700 】《(salfor毕业证书)索尔福德大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless ReproducibilityUniversity of Rennes, INSA Rennes, Inria/IRISA, CNRS
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
Shallowest Oil Discovery of Turkiye.pptx
The Petroleum System of the Çukurova Field - the Shallowest Oil Discovery of Türkiye, Adana
The binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
Applied Science: Thermodynamics, Laws & Methodology.pdf
When I was asked to give a companion lecture in support of ‘The Philosophy of Science’ (https://shorturl.at/4pUXz) I decided not to walk through the detail of the many methodologies in order of use. Instead, I chose to employ a long standing, and ongoing, scientific development as an exemplar. And so, I chose the ever evolving story of Thermodynamics as a scientific investigation at its best.
Conducted over a period of >200 years, Thermodynamics R&D, and application, benefitted from the highest levels of professionalism, collaboration, and technical thoroughness. New layers of application, methodology, and practice were made possible by the progressive advance of technology. In turn, this has seen measurement and modelling accuracy continually improved at a micro and macro level.
Perhaps most importantly, Thermodynamics rapidly became a primary tool in the advance of applied science/engineering/technology, spanning micro-tech, to aerospace and cosmology. I can think of no better a story to illustrate the breadth of scientific methodologies and applications at their best.
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
Although Artemia has been known to man for centuries, its use as a food for the culture of larval organisms apparently began only in the 1930s, when several investigators found that it made an excellent food for newly hatched fish larvae (Litvinenko et al., 2023). As aquaculture developed in the 1960s and ‘70s, the use of Artemia also became more widespread, due both to its convenience and to its nutritional value for larval organisms (Arenas-Pardo et al., 2024). The fact that Artemia dormant cysts can be stored for long periods in cans, and then used as an off-the-shelf food requiring only 24 h of incubation makes them the most convenient, least labor-intensive, live food available for aquaculture (Sorgeloos & Roubach, 2021). The nutritional value of Artemia, especially for marine organisms, is not constant, but varies both geographically and temporally. During the last decade, however, both the causes of Artemia nutritional variability and methods to improve poorquality Artemia have been identified (Loufi et al., 2024).
Brine shrimp (Artemia spp.) are used in marine aquaculture worldwide. Annually, more than 2,000 metric tons of dry cysts are used for cultivation of fish, crustacean, and shellfish larva. Brine shrimp are important to aquaculture because newly hatched brine shrimp nauplii (larvae) provide a food source for many fish fry (Mozanzadeh et al., 2021). Culture and harvesting of brine shrimp eggs represents another aspect of the aquaculture industry. Nauplii and metanauplii of Artemia, commonly known as brine shrimp, play a crucial role in aquaculture due to their nutritional value and suitability as live feed for many aquatic species, particularly in larval stages (Sorgeloos & Roubach, 2021).
SAR of Medicinal Chemistry 1st by dk.pdf
In this presentation include the prototype drug SAR on thus or with their examples .
Syllabus of Second Year B. Pharmacy
2019 PATTERN.
ESR spectroscopy in liquid food and beverages.pptx
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
如何办理(uvic毕业证书)维多利亚大学毕业证本科学位证书原版一模一样
原版纸张【微信：741003700 】【(uvic毕业证书)维多利亚大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Compexometric titration/Chelatorphy titration/chelating titration
Compexometric titration/Chelatorphy titration/chelating titration
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
8.Isolation of pure cultures and preservation of cultures.pdf
8.Isolation of pure cultures and preservation of cultures.pdf
aziz sancar nobel prize winner: from mardin to nobel
aziz sancar nobel prize winner: from mardin to nobel
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless Reproducibility
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
Applied Science: Thermodynamics, Laws & Methodology.pdf
Applied Science: Thermodynamics, Laws & Methodology.pdf
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
ESR spectroscopy in liquid food and beverages.pptx
ESR spectroscopy in liquid food and beverages.pptx
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Basics of crystallography, crystal systems, classes and different forms
Basics of crystallography, crystal systems, classes and different forms
Diffraction through Gaps, At Edges and Transmission.ppt
- 1. refraction reflection diffraction questions
- 3. •Diffraction is the spreading out of waves at edges and gaps. •All types of waves can be diffracted. •The amount of diffraction is affected by the size of the gap and the wavelength. previous next
- 7. Small amount of spreading (diffraction) previous next The wavelength of the waves is much smaller than the size of the gap
- 8. The wavelength is the same size as the gap so there is very good spreading (diffraction) previous next
- 9. Typical frequency = 440Hertz Speed of sound in air = 330m/s Speed = wavelength x frequency Work out the wavelength of these sound waves Wavelength = speed/frequency Wavelength = 330/440 = 0.75metres previous next About the same size as the width of a door
- 10. previous next
- 11. To get spreading (diffraction) of the light the gap it passes through has to be very small-because the wavelength of light is very small previous next
- 12. For edges Long wavelengths diffract more than short wavelengths. For gaps The wavelength should be the same size as the gap to get good diffraction. previous next
- 13. previous next
- 14. previous next
- 15. The aerial is on a pole to try and improve the reception of radio waves. previous next
- 16. previous next
- 17. previous next
- 18. There is very little diffraction of short wavelength radio waves when they pass between two hills previous next
- 19. Long wavelength radio waves are more likely to be diffracted when they pass between hills and are more likely to be detected by the aerial. previous next