2. ACKNOWLEDGEMENT
Welcome, and thank you for taking the time to view my portfolio.
The Goal of this portfolio is to give you a deeper insight into my experiences and skills
I have gained over my recent history.
It is my hope that this will allow you to better assess how my skills can be applied to
your company.
I would be happy to talk in more detail and can be reached using the contact
information at the Front page.
3. ABOUT ME
Performance delivering design engineer, passionate about designing, proficient in CAD modeling and Drafting. I am
driven by the desire to gain knowledge and work hard to achieve the desired goals.
Objective
Seeking for the position as a Design Engineer within an organization where I could add value to the organization for
the mutual success by using my technical knowledge and skills.
Core Competencies
Proficient in the use of Solid works, Auto Cad ,PTC Creo and Drafting Techniques.
Proficient Knowledge of GD&T.
5. UNIVERSAL
COUPLING
A universal joint (universal coupling, U-
joint, Cardan joint, Spicer or Hardy Spicer joint, or Hooke's joint)
is a joint or coupling connecting rigid rods whose axes are inclined to
each other, and is commonly used in shafts that transmit rotary motion.
It is a rigid coupling that connects two shafts, whose axes intersect if
extended. It consists of two forks which are keyed to the shafts. The
two forks are pin joined to a central block, which has two arms at right
angle to each other in the form of a cross (Fig.). The angle between the
shafts may be varied even while the shafts are rotating.
Universal coupling has a wide range of applications. It is used in:
* Drive shafts
* Automobile propeller shafts
* Stone crushers
* Tapping machinery
8. KNUCKLE
JOINT
A knuckle joint is a mechanical joint used to connect two rods which
are under a tensile load, when there is a requirement of small amount
of flexibility, or angular moment is necessary. There is always axial or
linear line of action of load.
The knuckle joint assembly consists of the following major components:
Single eye.
Double eye or fork
Knuckle pin.
At one end of the rod the a single eye is formed and a double eye is
formed at the other end of the rod. Both, single and double eye are
connected by a pin inserted through the eye. The pin has a head at one
end and at other end there is a taper pin or split pin. For gripping
purpose, the ends of the rod are of octagonal forms. Now, when the
two eyes are pulled apart, the pin holds them together. The solid rod
portion of the joint in this case is much stronger than the portion
through which the pin passes
