Design and development of automatic hand sanitizer dispenser.
•Download as PPTX, PDF•
0 likes•162 views
This document summarizes the design and development of an automatic hand sanitizer dispenser. The system uses an Arduino Uno microcontroller, ultrasonic sensor, and peristaltic pump. It is designed to automatically dispense sanitizer when a person's hand is detected within 90cm of the sensor. The total estimated cost is 1500 BDT. The automatic dispenser is intended to help promote frequent hand sanitizing during the COVID-19 pandemic in a low-cost way.
Report
Share
Report
Share
Recommended
Design and development of automatic hand sanitizer dispenser.
This is the study of the Microcontroller,Computer Peripherals and Interfacing Lab.Where we have presented an project design for automatic hand sanitizer system.
Automatic hand sanitizer dispenser
This document describes an automatic hand sanitizer dispenser system using an Arduino Uno microcontroller. The system uses an ultrasonic sensor to detect when a hand is placed within 90cm of the dispenser, which then activates a servo motor to dispense the sanitizer. A flowchart shows the detection and dispensing process. A circuit diagram and component list with estimated costs are provided. The document concludes that such automatic dispensers should be installed in various public places to help prevent the spread of COVID-19 through improved hand sanitization.
Covid 19 preventive measures for schools
"When the going getting tough, only the tough gets going!"
After an extensive research on the various products and solutions available in the Indian market, to help reopened school system function smoothly. The products & solutions listed in this presentation shall be very effective in protecting the health and safety of the child and teachers. These SOP's are made in a logical conclusion, to avoid any increase in the school fee of the child, which might be an burden for many parents under Covid-19 circumstances.
I'm open to help the schools,colleges and other organizations to design and implement cost effective Coivd-19 preventive measures. Based on the system study and functional requirements understanding, i can suggest the products & solutions on case-to-case basis. Pricing of the product & solutions will vary based on requirement and the minimum order quantity, which can be negotiated with the vendors. These products & solutions shall be exported to any country based on the MOQ.
"With high regards to the teachers and students, prevention is better than cure!"
Please feel free to contact me Mobile:+91-7397754465 ; E-Mail: kittuarun7@gmail.com
Thanks for your valuable time.
Automated hand sanitizer despenser
This document outlines a project to develop an automated hand sanitizer device and non-contact temperature detection system for supermarket entrances. The system aims to provide touchless sanitization and temperature checks while monitoring sanitizer levels and quality. It will be developed over 3 months using components like a liquid pump, proximity sensor, and temperature sensor. The device will be tested for accuracy of temperature readings, sanitization timing, liquid level detection, and ignition detection before finalizing. The system is intended to improve hygiene and health protections while reducing employee workload during the COVID-19 pandemic.
Keep the pandemic situations in mind Brihaspathi designed a device COVI PRO
An ISO and GEM (Government E Marketplace) approved and certified device from Brihaspathi Technologies Hyderabad has designed and developed a Device Called COVIPRO.
were the device is integrated with Medical Grade temperature Sensor.
It has an Hand sanitizer which is automatic and has the sanitizer capacity of upto 5 litres.
And also has a UV Disinfection Chamber which is contactless and has a Magnetic door sensor.
IRJET- Smart Solid and Liquid Waste Management System using Wireless Technology
This document describes a proposed smart solid and liquid waste management system using wireless technology. The system uses sensors installed in waste bins to detect bin fill levels and send the data via a wireless network. When a bin is full, it notifies workers so that emptying can be optimized for efficiency. The system aims to automate waste management and increase productivity. It collects real-time waste data using IoT sensors to help waste companies make better operational decisions.
IRJET-Smart Saline Monitoring System using Load Cell and RF Sensor
This document describes a smart saline monitoring system that uses a load cell and RF sensor to automatically monitor saline levels for patients in hospitals. The system is designed to alert nurses and doctors through a buzzer and indicator light when the saline level reaches a critical point to prevent harm to patients from saline not being changed in time. The system uses a load cell sensor connected to an HX711 amplifier to measure the weight of the saline bottle. An Arduino Nano sends the data via an RF transmitter module. An RF receiver module connected to a PIC16F877A microcontroller receives the data and triggers alerts like LEDs and a buzzer when the critical level is reached to notify staff. The system is intended to reduce
Iot liquid level monitoring system
This document describes an IOT liquid level monitoring system that uses ultrasonic sensors to detect liquid levels in four containers. It sends this data over WiFi to a web page using an AVR microcontroller, LCD screen, and WiFi modem. The web page displays a graphical representation of the liquid levels in the containers. When the liquid reaches a set limit, the system sounds a buzzer. This helps prevent overflow and wastage by remotely monitoring liquid levels.
Recommended
Design and development of automatic hand sanitizer dispenser.
This is the study of the Microcontroller,Computer Peripherals and Interfacing Lab.Where we have presented an project design for automatic hand sanitizer system.
Automatic hand sanitizer dispenser
This document describes an automatic hand sanitizer dispenser system using an Arduino Uno microcontroller. The system uses an ultrasonic sensor to detect when a hand is placed within 90cm of the dispenser, which then activates a servo motor to dispense the sanitizer. A flowchart shows the detection and dispensing process. A circuit diagram and component list with estimated costs are provided. The document concludes that such automatic dispensers should be installed in various public places to help prevent the spread of COVID-19 through improved hand sanitization.
Covid 19 preventive measures for schools
"When the going getting tough, only the tough gets going!"
After an extensive research on the various products and solutions available in the Indian market, to help reopened school system function smoothly. The products & solutions listed in this presentation shall be very effective in protecting the health and safety of the child and teachers. These SOP's are made in a logical conclusion, to avoid any increase in the school fee of the child, which might be an burden for many parents under Covid-19 circumstances.
I'm open to help the schools,colleges and other organizations to design and implement cost effective Coivd-19 preventive measures. Based on the system study and functional requirements understanding, i can suggest the products & solutions on case-to-case basis. Pricing of the product & solutions will vary based on requirement and the minimum order quantity, which can be negotiated with the vendors. These products & solutions shall be exported to any country based on the MOQ.
"With high regards to the teachers and students, prevention is better than cure!"
Please feel free to contact me Mobile:+91-7397754465 ; E-Mail: kittuarun7@gmail.com
Thanks for your valuable time.
Automated hand sanitizer despenser
This document outlines a project to develop an automated hand sanitizer device and non-contact temperature detection system for supermarket entrances. The system aims to provide touchless sanitization and temperature checks while monitoring sanitizer levels and quality. It will be developed over 3 months using components like a liquid pump, proximity sensor, and temperature sensor. The device will be tested for accuracy of temperature readings, sanitization timing, liquid level detection, and ignition detection before finalizing. The system is intended to improve hygiene and health protections while reducing employee workload during the COVID-19 pandemic.
Keep the pandemic situations in mind Brihaspathi designed a device COVI PRO
An ISO and GEM (Government E Marketplace) approved and certified device from Brihaspathi Technologies Hyderabad has designed and developed a Device Called COVIPRO.
were the device is integrated with Medical Grade temperature Sensor.
It has an Hand sanitizer which is automatic and has the sanitizer capacity of upto 5 litres.
And also has a UV Disinfection Chamber which is contactless and has a Magnetic door sensor.
IRJET- Smart Solid and Liquid Waste Management System using Wireless Technology
This document describes a proposed smart solid and liquid waste management system using wireless technology. The system uses sensors installed in waste bins to detect bin fill levels and send the data via a wireless network. When a bin is full, it notifies workers so that emptying can be optimized for efficiency. The system aims to automate waste management and increase productivity. It collects real-time waste data using IoT sensors to help waste companies make better operational decisions.
IRJET-Smart Saline Monitoring System using Load Cell and RF Sensor
This document describes a smart saline monitoring system that uses a load cell and RF sensor to automatically monitor saline levels for patients in hospitals. The system is designed to alert nurses and doctors through a buzzer and indicator light when the saline level reaches a critical point to prevent harm to patients from saline not being changed in time. The system uses a load cell sensor connected to an HX711 amplifier to measure the weight of the saline bottle. An Arduino Nano sends the data via an RF transmitter module. An RF receiver module connected to a PIC16F877A microcontroller receives the data and triggers alerts like LEDs and a buzzer when the critical level is reached to notify staff. The system is intended to reduce
Iot liquid level monitoring system
This document describes an IOT liquid level monitoring system that uses ultrasonic sensors to detect liquid levels in four containers. It sends this data over WiFi to a web page using an AVR microcontroller, LCD screen, and WiFi modem. The web page displays a graphical representation of the liquid levels in the containers. When the liquid reaches a set limit, the system sounds a buzzer. This helps prevent overflow and wastage by remotely monitoring liquid levels.
IRJET- Arduino based Garbage Monitoring System using IoT
1. This document describes an Arduino-based garbage monitoring system using IoT that monitors multiple garbage bins placed throughout cities.
2. Each bin is equipped with an ultrasonic sensor to detect the fill level, and an Arduino board that transmits the sensor data via WiFi to a central server.
3. Municipal officers can monitor bin levels in real-time through an app, and dispatch garbage trucks more efficiently by only collecting from full bins, improving waste management services.
IRJET- Smart Waste Management System using IoT for Smart Cities
This document describes a smart waste management system using IoT for smart cities. The system uses sensors attached to garbage bins to monitor waste levels, temperature, and harmful gases. An Arduino board collects data from the sensors and sends it over WiFi to a web server. The web server displays waste levels in real-time and sends alerts to municipal authorities when bins need emptying. A mobile app allows bin drivers and the public to check bin statuses. The system aims to automate waste collection, promote hygienic environments, and reduce health issues associated with overflowing garbage bins.
IRJET- Robot to Unclog Sewage Channels
The document proposes a robot system to unclog sewage channels as an alternative to manual sewage cleaning. The robot would use sensors to detect walls and monitor water levels. It would have a cleaning blade, storage unit, and Bluetooth connectivity controlled via an Android app. The storage unit could be detached when full. This robot aims to reduce health risks to workers by automating sewage cleaning and saving lives compared to manual methods still used in some areas. It could help address continued illegal manual scavenging despite bans.
Automatic Hand Sanitizer Using Ultrasonic Sensor
This document describes a proposed automatic hand sanitizer system that uses mist and UV light for improved efficiency and safety. The system uses an Arduino microcontroller connected to an ultrasonic sensor, mist maker, UV lamp, LCD display, buzzer and timer buttons. When hands are detected by the sensor, the mist maker and UV lamp are activated for the set timer period. A buzzer alerts the user if they remove their hands early. This fog-based system uses 95% less sanitizer and the UV light provides additional disinfection for improved safety over liquid-based systems.
Bio-Medical Smart Saline Bottle
This document describes a smart saline bottle that monitors fluid levels and alerts medical staff when levels get too low. It uses a non-contact capacitive sensor to detect fluid levels in the bottle. When levels drop below a threshold, the sensor notifies a microcontroller which then sends text messages and phone calls to specified numbers. It also activates a buzzer near the patient's bed to alert anyone present. This is meant to save time for medical staff and prevent errors from low fluid levels going unnoticed.
IRJET- Level Loop Measurement using IoT
This document describes a system for remotely monitoring liquid levels in tanks using ultrasonic sensors, WiFi modules, and an Arduino board. Ultrasonic sensors attached to the tops of tanks measure the distance to the liquid surface. These measurements are sent wirelessly via WiFi modules to an Arduino board, which stores and displays the liquid level data over time. The system allows liquid levels in tanks spread across large areas to be monitored remotely without needing wires, which is important for processes involving hazardous liquids.
IRJET - Smart Dustbin for Smart Cities
This document describes a smart dustbin system that uses an ultrasonic sensor and Arduino microcontroller to detect waste levels in garbage bins. When the bin reaches a threshold level of fullness, it sends a message to the municipality to alert them for garbage collection. It discusses the issues with overflowing bins currently and how this system aims to address that. It also reviews several related works that use sensors and IoT to monitor waste levels and communicate with authorities. The proposed system architecture uses an ultrasonic sensor connected to an Arduino board to measure levels and send data to a GSM module to message the municipality when the threshold is reached. This is aimed to improve waste management and promote a cleaner environment.
Bagasse Level Monitoring System
This document describes a system to automatically monitor and display the level of bagasse in a silo at a sugar factory. Currently, workers must visually check the level through glass on the silo, which can lead to errors. The proposed system uses an ultrasonic sensor to measure the bagasse level, and sends the measurement to an Arduino board connected to an LCD display. This allows the level to be digitally monitored without human involvement. A DC motor is also included to automatically open and close a door based on the measured level. The system aims to reduce human errors and provide an accurate method for determining the amount of bagasse available in the silo.
An approach for the design of an automatic hand sanitizing machine using fog ...
The document describes a proposed automatic hand sanitizing machine that uses fog sanitizer. The machine aims to sanitize hands without using excessive sanitizer or water. When a user inserts their hands, a sensor activates a fog maker system that converts sanitizer into a mist. This exposes the hands to sanitizer fog for 5-15 seconds to sanitize without direct contact. The system is designed to use less than 95% of the typical sanitizer amount to address issues like sanitizer waste and dry skin from overuse. It uses an Arduino, fog maker, sensors and other hardware to automatically generate and apply sanitizer fog when hands are placed inside.
IRJET- Smart Waste Monitoring System
This document describes a smart waste monitoring system that uses sensors and wireless communication to automatically monitor waste levels in garbage bins. An ultrasonic sensor is mounted on top of the bin to measure the distance from the sensor to the top of the waste. A microcontroller processes the sensor data and sends alerts via cloud server when the waste level reaches a threshold. The system aims to improve waste management efficiency by alerting collectors only when bins need emptying, reducing overflow and improving sanitation. Real-time monitoring of waste levels is provided through a web application, allowing waste collection to be optimized. The smart bins are a proposed solution for efficient waste handling in urban and "smart cities".
E-Waste Management Rules.pdf
This document provides an introduction to a toolkit on e-waste management rules 2016 in India. It discusses the growing problem of e-waste in India due to rising electronics consumption. The key points covered are:
1. E-waste generation is increasing rapidly in India along with the growth of the IT and consumer electronics industry. Proper management of e-waste is needed to address its environmental and health impacts.
2. The E-Waste Management Rules 2016 were notified to implement an extended producer responsibility approach for e-waste management in India. The rules define responsibilities for different stakeholders including manufacturers, producers, collectors, dismantlers and recyclers.
3. The toolkit aims to help stakeholders understand and comply
IRJET- Smart Saline
The document describes a proposed smart saline monitoring system using Internet of Things technologies. The system uses sensors to monitor the level of saline in an IV bag. When the saline level drops below a critical level, the system will send a notification to a nurse's mobile phone or computer to alert them that the saline bag needs to be changed. The system is designed to automate the saline monitoring process and prevent accidents that could result from a nurse failing to notice the saline level getting too low. It uses inexpensive components like IR sensors, a Bluetooth module, and a microcontroller to keep track of the saline level and alert nurses when the bag needs replacing. The goal is to provide a low-cost, convenient, and reliable system for saline monitoring
IRJET- Smart Dustbin for Efficient Waste Management
This document proposes a smart dustbin system using sensors and IoT to improve waste management efficiency. The system uses infrared and ultrasonic sensors to detect waste levels and trigger notifications when bins are full. An ultrasonic sensor also automatically opens the bin lid when a person approaches to prevent odors. An Arduino microcontroller processes sensor data and connects to WiFi to send notifications via the ESP8266 module. The system aims to address issues with current waste collection approaches that leave bins overflowing and cause unhygienic environments. Notifying workers when bins need emptying could improve collection efficiency and environmental cleanliness.
sainitization or Sanitizing booth
made by deepanshu sain from global institute of technology
ppt creator
monusain2010@gmail.com
7790958618
ultrasonic flow meter
Are you looking for Ultrasonic Flow Mete then stop searching Manas Micro system is the best Ultrasonic Flow Meter supplier, Manufacturer Company in pune, Mumbai, Nashik, Chennai, Bangalore, Kolkata, Delhi, Gujarat, Indore, Karnataka, Maharashtra, India. We provide Ultrasonic Flow Meter at best price
IRJET- Efficient IoT based Smart Dustbin for Clean Environment
This document describes a proposed smart garbage bin system using IoT technology. The system uses ultrasonic sensors to measure garbage levels in bins, an AVR microcontroller to process sensor data and trigger alerts, and a GSM modem to notify authorities when bins reach a threshold level. The system aims to efficiently manage waste collection and avoid overflowing bins. Data from sensor nodes attached to each bin is sent to the cloud for analysis and monitoring of bin fill levels across the city. The smart bin system is expected to improve waste management by automating the collection process.
IRJET - Design of Automated Monitoring Robot for Drainage Systems using IoT P...
This document describes the design of an automated monitoring robot for drainage systems using an IoT platform. The proposed system uses a robot equipped with various sensors to monitor key parameters like pH, gas levels, temperature and humidity within sewage systems. The sensors transmit data to a controller on the robot. If parameter levels exceed thresholds, an alert buzzer sounds. The controller sends sensor data to the cloud via an IoT module for viewing by users. The robot can also avoid obstacles using ultrasonic sensors and has potential applications in detecting leaks or faults. The system aims to improve safety and efficiency over manual monitoring of drainage infrastructure.
Hightech-Sprayer
This document describes the design of an ultrasonic sensor controlled pesticide spraying robot. It aims to reduce direct human contact with pesticides and improve spraying efficiency in agriculture. The proposed robot uses a PIC microcontroller to control ultrasonic obstacle sensing and spray modules through relays. It can spray pesticides automatically and remotely, avoiding health risks to farmers from direct pesticide exposure. Test results showed the robot can replace human workers for spraying tasks and achieve good results. The robot is designed to increase food production in a sustainable way by reducing use of hazardous agricultural chemicals.
IRJET - Smart Garbage Monitoring System using NodeMCU
This document describes a smart garbage monitoring system using NodeMCU. The system monitors garbage levels in bins using ultrasonic sensors connected to a NodeMCU microcontroller. It transmits bin fill levels over WiFi to a website. When bins reach capacity, authorities can empty them. This automated system addresses issues with manual garbage collection by providing real-time bin monitoring to promote cleanliness and public health.
IRJET- Smart Bin
The document describes a smart bin system that uses an Arduino, ultrasonic sensor, and GSM modem to automatically alert waste collection authorities when a bin reaches capacity. The ultrasonic sensor measures waste levels in the bin and notifies the Arduino. The Arduino then sends a text message via the GSM modem to notify authorities. This allows for more efficient collection of full bins and prevents overflow. The system aims to improve waste management and reduce health and environmental issues associated with overflowing bins.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
More Related Content
Similar to Design and development of automatic hand sanitizer dispenser.
IRJET- Arduino based Garbage Monitoring System using IoT
1. This document describes an Arduino-based garbage monitoring system using IoT that monitors multiple garbage bins placed throughout cities.
2. Each bin is equipped with an ultrasonic sensor to detect the fill level, and an Arduino board that transmits the sensor data via WiFi to a central server.
3. Municipal officers can monitor bin levels in real-time through an app, and dispatch garbage trucks more efficiently by only collecting from full bins, improving waste management services.
IRJET- Smart Waste Management System using IoT for Smart Cities
This document describes a smart waste management system using IoT for smart cities. The system uses sensors attached to garbage bins to monitor waste levels, temperature, and harmful gases. An Arduino board collects data from the sensors and sends it over WiFi to a web server. The web server displays waste levels in real-time and sends alerts to municipal authorities when bins need emptying. A mobile app allows bin drivers and the public to check bin statuses. The system aims to automate waste collection, promote hygienic environments, and reduce health issues associated with overflowing garbage bins.
IRJET- Robot to Unclog Sewage Channels
The document proposes a robot system to unclog sewage channels as an alternative to manual sewage cleaning. The robot would use sensors to detect walls and monitor water levels. It would have a cleaning blade, storage unit, and Bluetooth connectivity controlled via an Android app. The storage unit could be detached when full. This robot aims to reduce health risks to workers by automating sewage cleaning and saving lives compared to manual methods still used in some areas. It could help address continued illegal manual scavenging despite bans.
Automatic Hand Sanitizer Using Ultrasonic Sensor
This document describes a proposed automatic hand sanitizer system that uses mist and UV light for improved efficiency and safety. The system uses an Arduino microcontroller connected to an ultrasonic sensor, mist maker, UV lamp, LCD display, buzzer and timer buttons. When hands are detected by the sensor, the mist maker and UV lamp are activated for the set timer period. A buzzer alerts the user if they remove their hands early. This fog-based system uses 95% less sanitizer and the UV light provides additional disinfection for improved safety over liquid-based systems.
Bio-Medical Smart Saline Bottle
This document describes a smart saline bottle that monitors fluid levels and alerts medical staff when levels get too low. It uses a non-contact capacitive sensor to detect fluid levels in the bottle. When levels drop below a threshold, the sensor notifies a microcontroller which then sends text messages and phone calls to specified numbers. It also activates a buzzer near the patient's bed to alert anyone present. This is meant to save time for medical staff and prevent errors from low fluid levels going unnoticed.
IRJET- Level Loop Measurement using IoT
This document describes a system for remotely monitoring liquid levels in tanks using ultrasonic sensors, WiFi modules, and an Arduino board. Ultrasonic sensors attached to the tops of tanks measure the distance to the liquid surface. These measurements are sent wirelessly via WiFi modules to an Arduino board, which stores and displays the liquid level data over time. The system allows liquid levels in tanks spread across large areas to be monitored remotely without needing wires, which is important for processes involving hazardous liquids.
IRJET - Smart Dustbin for Smart Cities
This document describes a smart dustbin system that uses an ultrasonic sensor and Arduino microcontroller to detect waste levels in garbage bins. When the bin reaches a threshold level of fullness, it sends a message to the municipality to alert them for garbage collection. It discusses the issues with overflowing bins currently and how this system aims to address that. It also reviews several related works that use sensors and IoT to monitor waste levels and communicate with authorities. The proposed system architecture uses an ultrasonic sensor connected to an Arduino board to measure levels and send data to a GSM module to message the municipality when the threshold is reached. This is aimed to improve waste management and promote a cleaner environment.
Bagasse Level Monitoring System
This document describes a system to automatically monitor and display the level of bagasse in a silo at a sugar factory. Currently, workers must visually check the level through glass on the silo, which can lead to errors. The proposed system uses an ultrasonic sensor to measure the bagasse level, and sends the measurement to an Arduino board connected to an LCD display. This allows the level to be digitally monitored without human involvement. A DC motor is also included to automatically open and close a door based on the measured level. The system aims to reduce human errors and provide an accurate method for determining the amount of bagasse available in the silo.
An approach for the design of an automatic hand sanitizing machine using fog ...
The document describes a proposed automatic hand sanitizing machine that uses fog sanitizer. The machine aims to sanitize hands without using excessive sanitizer or water. When a user inserts their hands, a sensor activates a fog maker system that converts sanitizer into a mist. This exposes the hands to sanitizer fog for 5-15 seconds to sanitize without direct contact. The system is designed to use less than 95% of the typical sanitizer amount to address issues like sanitizer waste and dry skin from overuse. It uses an Arduino, fog maker, sensors and other hardware to automatically generate and apply sanitizer fog when hands are placed inside.
IRJET- Smart Waste Monitoring System
This document describes a smart waste monitoring system that uses sensors and wireless communication to automatically monitor waste levels in garbage bins. An ultrasonic sensor is mounted on top of the bin to measure the distance from the sensor to the top of the waste. A microcontroller processes the sensor data and sends alerts via cloud server when the waste level reaches a threshold. The system aims to improve waste management efficiency by alerting collectors only when bins need emptying, reducing overflow and improving sanitation. Real-time monitoring of waste levels is provided through a web application, allowing waste collection to be optimized. The smart bins are a proposed solution for efficient waste handling in urban and "smart cities".
E-Waste Management Rules.pdf
This document provides an introduction to a toolkit on e-waste management rules 2016 in India. It discusses the growing problem of e-waste in India due to rising electronics consumption. The key points covered are:
1. E-waste generation is increasing rapidly in India along with the growth of the IT and consumer electronics industry. Proper management of e-waste is needed to address its environmental and health impacts.
2. The E-Waste Management Rules 2016 were notified to implement an extended producer responsibility approach for e-waste management in India. The rules define responsibilities for different stakeholders including manufacturers, producers, collectors, dismantlers and recyclers.
3. The toolkit aims to help stakeholders understand and comply
IRJET- Smart Saline
The document describes a proposed smart saline monitoring system using Internet of Things technologies. The system uses sensors to monitor the level of saline in an IV bag. When the saline level drops below a critical level, the system will send a notification to a nurse's mobile phone or computer to alert them that the saline bag needs to be changed. The system is designed to automate the saline monitoring process and prevent accidents that could result from a nurse failing to notice the saline level getting too low. It uses inexpensive components like IR sensors, a Bluetooth module, and a microcontroller to keep track of the saline level and alert nurses when the bag needs replacing. The goal is to provide a low-cost, convenient, and reliable system for saline monitoring
IRJET- Smart Dustbin for Efficient Waste Management
This document proposes a smart dustbin system using sensors and IoT to improve waste management efficiency. The system uses infrared and ultrasonic sensors to detect waste levels and trigger notifications when bins are full. An ultrasonic sensor also automatically opens the bin lid when a person approaches to prevent odors. An Arduino microcontroller processes sensor data and connects to WiFi to send notifications via the ESP8266 module. The system aims to address issues with current waste collection approaches that leave bins overflowing and cause unhygienic environments. Notifying workers when bins need emptying could improve collection efficiency and environmental cleanliness.
sainitization or Sanitizing booth
made by deepanshu sain from global institute of technology
ppt creator
monusain2010@gmail.com
7790958618
ultrasonic flow meter
Are you looking for Ultrasonic Flow Mete then stop searching Manas Micro system is the best Ultrasonic Flow Meter supplier, Manufacturer Company in pune, Mumbai, Nashik, Chennai, Bangalore, Kolkata, Delhi, Gujarat, Indore, Karnataka, Maharashtra, India. We provide Ultrasonic Flow Meter at best price
IRJET- Efficient IoT based Smart Dustbin for Clean Environment
This document describes a proposed smart garbage bin system using IoT technology. The system uses ultrasonic sensors to measure garbage levels in bins, an AVR microcontroller to process sensor data and trigger alerts, and a GSM modem to notify authorities when bins reach a threshold level. The system aims to efficiently manage waste collection and avoid overflowing bins. Data from sensor nodes attached to each bin is sent to the cloud for analysis and monitoring of bin fill levels across the city. The smart bin system is expected to improve waste management by automating the collection process.
IRJET - Design of Automated Monitoring Robot for Drainage Systems using IoT P...
This document describes the design of an automated monitoring robot for drainage systems using an IoT platform. The proposed system uses a robot equipped with various sensors to monitor key parameters like pH, gas levels, temperature and humidity within sewage systems. The sensors transmit data to a controller on the robot. If parameter levels exceed thresholds, an alert buzzer sounds. The controller sends sensor data to the cloud via an IoT module for viewing by users. The robot can also avoid obstacles using ultrasonic sensors and has potential applications in detecting leaks or faults. The system aims to improve safety and efficiency over manual monitoring of drainage infrastructure.
Hightech-Sprayer
This document describes the design of an ultrasonic sensor controlled pesticide spraying robot. It aims to reduce direct human contact with pesticides and improve spraying efficiency in agriculture. The proposed robot uses a PIC microcontroller to control ultrasonic obstacle sensing and spray modules through relays. It can spray pesticides automatically and remotely, avoiding health risks to farmers from direct pesticide exposure. Test results showed the robot can replace human workers for spraying tasks and achieve good results. The robot is designed to increase food production in a sustainable way by reducing use of hazardous agricultural chemicals.
IRJET - Smart Garbage Monitoring System using NodeMCU
This document describes a smart garbage monitoring system using NodeMCU. The system monitors garbage levels in bins using ultrasonic sensors connected to a NodeMCU microcontroller. It transmits bin fill levels over WiFi to a website. When bins reach capacity, authorities can empty them. This automated system addresses issues with manual garbage collection by providing real-time bin monitoring to promote cleanliness and public health.
IRJET- Smart Bin
The document describes a smart bin system that uses an Arduino, ultrasonic sensor, and GSM modem to automatically alert waste collection authorities when a bin reaches capacity. The ultrasonic sensor measures waste levels in the bin and notifies the Arduino. The Arduino then sends a text message via the GSM modem to notify authorities. This allows for more efficient collection of full bins and prevents overflow. The system aims to improve waste management and reduce health and environmental issues associated with overflowing bins.
Similar to Design and development of automatic hand sanitizer dispenser. (20)
IRJET- Arduino based Garbage Monitoring System using IoT
IRJET- Arduino based Garbage Monitoring System using IoT
IRJET- Smart Waste Management System using IoT for Smart Cities
IRJET- Smart Waste Management System using IoT for Smart Cities
An approach for the design of an automatic hand sanitizing machine using fog ...
An approach for the design of an automatic hand sanitizing machine using fog ...
IRJET- Smart Dustbin for Efficient Waste Management
IRJET- Smart Dustbin for Efficient Waste Management
IRJET- Efficient IoT based Smart Dustbin for Clean Environment
IRJET- Efficient IoT based Smart Dustbin for Clean Environment
IRJET - Design of Automated Monitoring Robot for Drainage Systems using IoT P...
IRJET - Design of Automated Monitoring Robot for Drainage Systems using IoT P...
IRJET - Smart Garbage Monitoring System using NodeMCU
IRJET - Smart Garbage Monitoring System using NodeMCU
Recently uploaded
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Recently uploaded (20)
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
Design and development of automatic hand sanitizer dispenser.
- 1. Design and development of automatic hand sanitizer dispenser. Presented By Md. Motaharozzaman(1624) Department of CSE. National University.
- 2. Introduction • In this current scenario of global outbreak , Sanitizers have become the most significant commodities right now by the new rules and regulations given by WHO vigorous sanitizations is needed to survive. • This project’s design introduces an automatic and sanitizer which will be very helpful for this current epidemic situations.
- 3. System Overview • Platform: Tinker cad. • Language: Arduino. • Estimated Cost: The total estimated cost will be around 1500 BDT. Hardware Components Quantity COST(BDT) Arduino Uno R3 1 400 Ultrasonic Sensor HC- SR04 1 70 12v peristaltic pump 1 500 Wires Depend on Connections 90(per each set)
- 4. System Overview : Flowchart Arduino Uno R3 Start Distance Ultrasonic Sensor Distan ce <90 cm Off in the distance peristaltic pump Peristaltic pump Ultrasonic Sensor HC- SR04 YES NO
- 6. Feasibility The COVID-19 pandemic has dramatically changed the dynamics of the hand Sanitizer Market . According to research. Bangladesh Hand Sanitizer Market size is expected to witness considerable growth during 2020-2023. This technology in Bangladesh hand sanitizer market trends, opportunities areas and market driver which would help the stakeholders their market strategies according to the current and future market dynamics.
- 7. Conclusion • The situation of worldwide, sanitization commodities should be installed in each and every corner of the sphere , be it an industry , a corporate office , an educational institute or a shopping mall.
- 8. Thank you