DescriptionYou were selected to design a small peer-to-peer ne.docx
•Download as DOCX, PDF•
0 likes•9 views
Description You were selected to design a small peer-to-peer network for a new facility which has six computers and a networked printer. Each desk computer must have a wired network connection. The rooms are to have wireless access for mobile devices. For this assignment, utilize the Gliffy (Links to an external site.)Links to an external site. software application to create a basic network diagram depicting a star topology with a switch as the central communications node. The focus here is on the network communications equipment for this LAN. Include only that equipment and end node devices on the network diagram. There is no need to draw out the layout of the physical space. In addition to providing a network diagram, you must also provide a short essay that describes the details of the LAN equipment that is being used and the connections. In the essay, be sure to explain why each device is positioned where it is. Also, briefly state any assumptions you've made about the kind of work being done, the demands the personnel in the office will put on the network, how they'll use it, and how that influenced your design. For example, if the business that uses the LAN is a small video-based news streaming service, they will probably need more performance from both their network and ISP than a small rental property management office might need. Recommended reading: Understanding Routers, Switches and Network Hardware (Links to an external site.)Links to an external site. Requirements 1. Depict a star topology that uses Ethernet. 2. Provide a 'cloud' shape or another symbol for the ISP WAN service. Label the symbol as 'Dial-up,' 'Cable,' or 'Fiber Optic.' 3. Label all network devices in the LAN (brand and model names are acceptable but not required). 4. Connect to the ISP service using a dial-up modem, cable modem, or, if using fiber optic service, an optical network terminal (ONT). Do not use a combination device such as a modem/router. 5. Connect the LAN router (wireless router) to the ISP WAN service device. The LAN router provides many capabilities to include: DHCP (Links to an external site.)Links to an external site., NAT translation (Links to an external site.)Links to an external site., port forwarding (Links to an external site.)Links to an external site., QoS (Links to an external site.)Links to an external site., and software firewall services. Do not use a router/switch combination device, however a router with integrated wireless capabilities is acceptable. 6. Use a managed switch as a centrally-located device to provide wired network connectivity for the seven end nodes (six desktop computers and a printer). Connect the switch directly to the main LAN router. 7. Connect the seven end nodes directly to the central switch. 8. Label the specific type of physical media (cables) being used to connect the LAN router to the ISP service device, the central switch to the LAN router, and the seven end nodes to the central switch. 9. Use a s.
Report
Share
Report
Share
Recommended
NETWORKING SYSTEMS .docx
NETWORKING SYSTEMS 1
NETWORKING SYSTEMS 5
Networking System
Sarju Thapa
Dr. Stephen Gardner
East Central University
Abstract
In this report, the planning to design the network will be discussed and demonstrated in detail. The planning to design the network layout will be made according to the scenario given in the requirements. The plan will be implemented by the evaluation of the aspects that are important to design the network and other necessary things to design and implement the network. After implementing the network, the network will be tested by secure communication, WAN communication Channel, Wireless network, and PAN network. The troubleshooting of the network will also be discussed and elaborated in detail. The protocols used in this network will also be taken into consideration.
Introduction
Designing a network is not a simple task for someone. There are different phases to design the network. Each phase has a very important role to design the network. The first phase is to collect all the requirements to design the network. The second phase is to evaluate the requirements to make sure that either requirement is enough to design the network or not. After evaluating the requirements, the third phase is to implement all the aspects that are gathered in requirements. The fourth and last phase after implementing the network design is to optimize the network by performance.
Network Layout
The physical arrangement of the network is called network layout. The network layout of the given is scenario is shown below:
Diagram created using CISCO PACKET TRACER 7.3.0
Demonstration
This network consists of two different places one place is headquarter which is the main point of this network and another place is Therall which is the working point of this network.
Headquarter
In headquarter, the Executive office, R&D, Reception, Guest office, and accounting office’s host are connected with one switch. Twisted pair cable is used in this part of the network. Each device directly connected with the headquarter switch. 8P8C (Actually, RJ-45 is the more common term) jack is used in this part of the network and it is located in the reception area. Bus topology is used in this part of the network. (I think that what you have in your diagram is a bus-star hybrid. The switch is the bus, the individual cables to the hosts are the star)
Thrall
In Thrall Remote, the Engineering area, production area, and reception area’s host are connected with the switch. Twisted pair cable is used in this part of the network. Each device directly connected with the headquarter switch. 8P8C jack is used in this part of the network and it is located in the reception area. Bus topology is used in this part of the network.
For bot.
MITS5003 Wireless Networks & Communication – 2020 – S1 .docx
MITS5003 Wireless Networks & Communication –
2020 – S1
Case Study
Submission Guidelines:
This is a Case study, wherein you will be responding to a RFP Request for Proposal a design of WLAN
Wireless LAN and Wide Area Network WAN. This assessment task is group task and you will work in
group to apply your knowledge, to analyse, design the network in this case study. This will cover the first
two learning outcomes and parts of other remaining learning outcomes of the unit. All submissions are to
be submitted through turn-it-in. Drop-boxes linked to turn-it-in will be set up in the Unit of Study Moodle
account. Assignments not submitted through these drop- boxes will not be considered. Submissions must
be made by the due date week-5 and time is Friday 4:00 PM.
The turn-it-in similarity score will be used in determining the level if any of plagiarism. Turn-it-in will
check conference web-sites, Journal articles, the Web and your own class group members submissions for
plagiarism. You can see your turn-it-in similarity score when you submit your assignment to the
appropriate drop-box. If this is a concern you will have a chance to change your assignment and re-
submit. However, re-submission is only allowed prior to the submission due date and time. After the due
date and time have elapsed you cannot make re-submissions and you will have to live with the similarity
score as there will be no chance for changing. Thus, plan early and submit early to take advantage of this
feature. Groups can make multiple submissions, but please remember we only see the last submission, and
the date and time you submitted will be taken from that submission.
Your document should be a single word or pdf document containing your report.
A Wireless network Infrastructure design for enterprise network:
A request for proposal (RFP) to design a new Wireless Local Area
Network LAN and Backbone wide area network (WAN) network design
report.
Group formation: In each tutorial please form a group of 3 to 4 students to work on the group
assignment. The assignment specifications are in a form of request for proposal (RFP) which is a
solicitation, often made through a bidding process, by a company interested in procurement of
an installation contract service to potential suppliers to submit a proposal. This group
assignment provides an opportunity for you to work in a project as a group member and apply
data communications and Computer networking concepts to a practical network design. You will
be required to analyse a case study and make networking recommendations based on the RFP
requirements. This assignment will also allow you to present your solutions in a formal reporting
format. Contributions from individual members of a project group will be described in the formal
report. Peer assessment component will be discussed; Forms such as Individual load factor and
Group load factor will be used to access individual and group .
Supportive Security Policies in SOHOTopic SUPPORTIVE SECURI.docx
Supportive Security Policies in SOHO
Topic: SUPPORTIVE SECURITY POLICIES IN SOHO
NETWORKING
It is a supportive system of sharing information and services among individuals and groups having a common interest.
A local-area network (LAN) is basically defined as two or more computers connected by a structured wire system for the purpose of sharing resources and files. In this chapter we will explain the various ‘structured wire systems’ that the Network Engineer will deal with during the course of their job. Wireless LANs are becoming more and more popular, but even these devices rely on some amount of physical wires in most cases.
REQUIREMENTS
Network Adapter
A computer needs a network adapter to connect to a network. It converts computer data into electronic signals. It listens for silence on the network cable and applies the data to it when it has an opportunity. The network access element of its job is called Media Access Control, or MAC. The physical address of every computer on a network is called its MAC address. The MAC address is the network adapter's serial number. Most computers are shipped with the network adapter integrated into the motherboard. However, early PCs didn't include this function and computer owners had to buy it separately and fit it into an expansion slot on the motherboard. These were called "network cards" because they were sold on a separate card. Although network adapters are now integrated, the name network card is still used. The wireless equivalent is called a Wireless Network Interface Controller.
Network Medium
Wired networks need cable. The most common form of cable used in networks is called the "Unshielded Twisted Pair." In PC shops, it is generally just referred to as "network cable" or "Ethernet cable." Ethernet is the most widely implemented set of standards for the physical properties of networks. UTP is so closely identified with Ethernet that it is often given that name. Other cable types used for networks are twin-axial, Shielded Twisted Pair and single-mode and multi-mode fiber optic cable. Wireless networks don't need cable; they send data on radio waves generated by the WNIC.
Cable Connectors
In wired networks, the most common form of connector is the RJ45. Every computer with networking capabilities has an RJ45 port. This is sometimes called a "network port" or an "Ethernet port." The RJ45 plug looks like a slightly larger telephone plug and connects the Unshielded Twisted Pair or the Shielded Twisted Pair cable.
Power Supply
Both wired and wireless networks need a power supply. A wireless network uses the current to generate radio waves. A cabled network sends data interpreted as an electronic pulse.
Hub/Switch/Router
In wired networks, one computer cannot connect to many others without some form of splitter. A hub is little more than a splitter. It repeats any signals coming into one of its ports out onto all its other ports. A cable leads from each port to one computer. A switch ...
Guide to home networking
Learn the different things you can do when you learn home networking. Can do more detailed tutorials when requested. As this is my first Slideshare, don't expect perfection.
Recommended
NETWORKING SYSTEMS .docx
NETWORKING SYSTEMS 1
NETWORKING SYSTEMS 5
Networking System
Sarju Thapa
Dr. Stephen Gardner
East Central University
Abstract
In this report, the planning to design the network will be discussed and demonstrated in detail. The planning to design the network layout will be made according to the scenario given in the requirements. The plan will be implemented by the evaluation of the aspects that are important to design the network and other necessary things to design and implement the network. After implementing the network, the network will be tested by secure communication, WAN communication Channel, Wireless network, and PAN network. The troubleshooting of the network will also be discussed and elaborated in detail. The protocols used in this network will also be taken into consideration.
Introduction
Designing a network is not a simple task for someone. There are different phases to design the network. Each phase has a very important role to design the network. The first phase is to collect all the requirements to design the network. The second phase is to evaluate the requirements to make sure that either requirement is enough to design the network or not. After evaluating the requirements, the third phase is to implement all the aspects that are gathered in requirements. The fourth and last phase after implementing the network design is to optimize the network by performance.
Network Layout
The physical arrangement of the network is called network layout. The network layout of the given is scenario is shown below:
Diagram created using CISCO PACKET TRACER 7.3.0
Demonstration
This network consists of two different places one place is headquarter which is the main point of this network and another place is Therall which is the working point of this network.
Headquarter
In headquarter, the Executive office, R&D, Reception, Guest office, and accounting office’s host are connected with one switch. Twisted pair cable is used in this part of the network. Each device directly connected with the headquarter switch. 8P8C (Actually, RJ-45 is the more common term) jack is used in this part of the network and it is located in the reception area. Bus topology is used in this part of the network. (I think that what you have in your diagram is a bus-star hybrid. The switch is the bus, the individual cables to the hosts are the star)
Thrall
In Thrall Remote, the Engineering area, production area, and reception area’s host are connected with the switch. Twisted pair cable is used in this part of the network. Each device directly connected with the headquarter switch. 8P8C jack is used in this part of the network and it is located in the reception area. Bus topology is used in this part of the network.
For bot.
MITS5003 Wireless Networks & Communication – 2020 – S1 .docx
MITS5003 Wireless Networks & Communication –
2020 – S1
Case Study
Submission Guidelines:
This is a Case study, wherein you will be responding to a RFP Request for Proposal a design of WLAN
Wireless LAN and Wide Area Network WAN. This assessment task is group task and you will work in
group to apply your knowledge, to analyse, design the network in this case study. This will cover the first
two learning outcomes and parts of other remaining learning outcomes of the unit. All submissions are to
be submitted through turn-it-in. Drop-boxes linked to turn-it-in will be set up in the Unit of Study Moodle
account. Assignments not submitted through these drop- boxes will not be considered. Submissions must
be made by the due date week-5 and time is Friday 4:00 PM.
The turn-it-in similarity score will be used in determining the level if any of plagiarism. Turn-it-in will
check conference web-sites, Journal articles, the Web and your own class group members submissions for
plagiarism. You can see your turn-it-in similarity score when you submit your assignment to the
appropriate drop-box. If this is a concern you will have a chance to change your assignment and re-
submit. However, re-submission is only allowed prior to the submission due date and time. After the due
date and time have elapsed you cannot make re-submissions and you will have to live with the similarity
score as there will be no chance for changing. Thus, plan early and submit early to take advantage of this
feature. Groups can make multiple submissions, but please remember we only see the last submission, and
the date and time you submitted will be taken from that submission.
Your document should be a single word or pdf document containing your report.
A Wireless network Infrastructure design for enterprise network:
A request for proposal (RFP) to design a new Wireless Local Area
Network LAN and Backbone wide area network (WAN) network design
report.
Group formation: In each tutorial please form a group of 3 to 4 students to work on the group
assignment. The assignment specifications are in a form of request for proposal (RFP) which is a
solicitation, often made through a bidding process, by a company interested in procurement of
an installation contract service to potential suppliers to submit a proposal. This group
assignment provides an opportunity for you to work in a project as a group member and apply
data communications and Computer networking concepts to a practical network design. You will
be required to analyse a case study and make networking recommendations based on the RFP
requirements. This assignment will also allow you to present your solutions in a formal reporting
format. Contributions from individual members of a project group will be described in the formal
report. Peer assessment component will be discussed; Forms such as Individual load factor and
Group load factor will be used to access individual and group .
Supportive Security Policies in SOHOTopic SUPPORTIVE SECURI.docx
Supportive Security Policies in SOHO
Topic: SUPPORTIVE SECURITY POLICIES IN SOHO
NETWORKING
It is a supportive system of sharing information and services among individuals and groups having a common interest.
A local-area network (LAN) is basically defined as two or more computers connected by a structured wire system for the purpose of sharing resources and files. In this chapter we will explain the various ‘structured wire systems’ that the Network Engineer will deal with during the course of their job. Wireless LANs are becoming more and more popular, but even these devices rely on some amount of physical wires in most cases.
REQUIREMENTS
Network Adapter
A computer needs a network adapter to connect to a network. It converts computer data into electronic signals. It listens for silence on the network cable and applies the data to it when it has an opportunity. The network access element of its job is called Media Access Control, or MAC. The physical address of every computer on a network is called its MAC address. The MAC address is the network adapter's serial number. Most computers are shipped with the network adapter integrated into the motherboard. However, early PCs didn't include this function and computer owners had to buy it separately and fit it into an expansion slot on the motherboard. These were called "network cards" because they were sold on a separate card. Although network adapters are now integrated, the name network card is still used. The wireless equivalent is called a Wireless Network Interface Controller.
Network Medium
Wired networks need cable. The most common form of cable used in networks is called the "Unshielded Twisted Pair." In PC shops, it is generally just referred to as "network cable" or "Ethernet cable." Ethernet is the most widely implemented set of standards for the physical properties of networks. UTP is so closely identified with Ethernet that it is often given that name. Other cable types used for networks are twin-axial, Shielded Twisted Pair and single-mode and multi-mode fiber optic cable. Wireless networks don't need cable; they send data on radio waves generated by the WNIC.
Cable Connectors
In wired networks, the most common form of connector is the RJ45. Every computer with networking capabilities has an RJ45 port. This is sometimes called a "network port" or an "Ethernet port." The RJ45 plug looks like a slightly larger telephone plug and connects the Unshielded Twisted Pair or the Shielded Twisted Pair cable.
Power Supply
Both wired and wireless networks need a power supply. A wireless network uses the current to generate radio waves. A cabled network sends data interpreted as an electronic pulse.
Hub/Switch/Router
In wired networks, one computer cannot connect to many others without some form of splitter. A hub is little more than a splitter. It repeats any signals coming into one of its ports out onto all its other ports. A cable leads from each port to one computer. A switch ...
Guide to home networking
Learn the different things you can do when you learn home networking. Can do more detailed tutorials when requested. As this is my first Slideshare, don't expect perfection.
1Running Head Network Design3Network DesignUn.docx
1
Running Head: Network Design
3
Network Design
University Affiliation
Course
Date
Professor
Wide Area Network Design
An enterprise network is a diverse and large network connecting most major points in a company, business or other organization. An enterprise differs from a WAN in that it is privately owned and maintained. There are a variety of WAN technologies to meet the different needs of businesses and many ways to scale the network. An enterprise must subscribe to a WAN service provider to use WAN carrier network services (Paquet, 2013).
In designing of the WAN portion of the network, the first step is to understand the specific network characteristics of the various locations from a Wide Area Network point of view and to then analyze and decide how to implement WAN connectivity at each location. The proposed WAN has specified both possible leased line as well as point to point radio connectivity between sites (Zhang, 2005). It is recommended that the wide area network connection between remote offices should be a point to point radio link. The Plant facility in one location has the capability of using satellite communications or other leased lines for this deployment. Also, for high availability it is recommended that all locations also have site to site redundant links over the Internet through the use of (virtual private network) VPN connectivity. VPN technology will enable organization to create private networks over the public Internet infrastructure that will maintain security and confidentiality. We will use VPNs to provide a virtual WAN infrastructure that connects branch offices to all or portions of their corporate network.
Different applications require varying amounts of network bandwidth the bandwidth required between these sites is dependent upon several factors that include amount of traffic (which varies depending upon the number of users connected to the network), number of hosts, number of network users, protocol being used, potential applications deployed on the network and the network design. For offices with lower bandwidth requirements the most recommended Frame Relay connection should provide no less than 768Kbps while locations with a larger bandwidth requirement will need point to point T1 connections (around 1.54Mbps). To determine which type of connection is appropriate at each location, a list of the approximate number of users and hosts at each site along with the applications they use will be we put in consideration when coming up with the equation for properly determining bandwidth requirements for the network. The required bandwidth in this case will be measured by first determining the amount of space available to transfer data. So for the T1 connections we need to divide 1.54Mbps by 8 to get the number of bytes per second available on the WAN connection. Therefore, a T1 connection will support 192 Mbps. Next, we will determine the amount of bandwidth needed for each application, which.
En35793797
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
BMIS 520IT Infrastructure Project Designing LAN Networks Assign
BMIS 520
IT Infrastructure Project: Designing LAN Networks Assignment Instructions
All labs must be submitted using the version of Packet Tracer in the online course/learning management system. Please do NOT use other versions of Packet Tracer to assure licensing compliance and proper assessment/credit. In addition, please do NOT add users or passwords to any device, leave all credentials blank for assessment purposes.
Project Background
Please reference Figure 1. Friendly Care Hospital is one of the biggest hospitals in DC. You have recently bought the hospital, naming it [Your Firstname Lastname] Hospital. For example, Jane Doe Hospital. Jane Doe Hospital owns a 5-story building and houses many departments that span multiple floors. Its Radiology department is spread across the first and second floors, connected by a dedicated local area network (LAN). The department has recently deployed a new “Radiology Images” application as part of their initiative to digitize patient records. However, the department staff sometimes faces long application delays during busy hours. It also experiences regular delays in Internet connectivity, FTPS services, web services, and email services.
Their original design, depicted in Figure 1, was categorized as a small network, providing services for up to 200-500 devices. They have well surpassed this. You, as their senior network administrator, are tasked with the job of a complete re-design. This design must support a medium to large sized network for over 1,000 devices. Thus, it should surpass the current capabilities.
Figure 1. Current Friendly Care Hospital Network Design
Overview
In this project, you will study performance improvements in a congested, wired LAN/WAN environment that can be solved to varying degrees by a new IT infrastructure design and fully functional implementation in Packet Tracer. To learn more about Packet Tracer please read the Cisco Packet Tracer DS PDF. Later, in Phase II of the project, you will scale this design to a larger enterprise IT infrastructure.
To begin the projects, you will complete a review of related literature to identify what is appropriate to improve system feasibility, RAS (reliability, availability, serviceability), security, and disaster recovery of the existing IT infrastructure and model of your hospital. Once this review of literature is complete, you will use the outcomes and research results to advance and improve the IT infrastructure. Proper data analysis, comparison, and contrast will be summarized within in-text tables and figures as well as appendixes to explain the results of the IT infrastructure re-design and improvement.
Packet Tracer is limited given it is a simulator. Be creative! For instance, if Packet Tracer does not have a file sharing service for a file sharing server, turn on any other related and relevant services that are available. As another example, use LAN and WAN protocols that are optimal given what the ver ...
LAN Architecture Over Fiber Optics.pdf
LAN is a type of networking architecture that helps to connect multiple computers in a single network. This can be done using fiber optic cable. This article describes fiber-optic LAN architecture, common types of fiber optic LAN network, and its advantages.
WiFi Hotspot-Wireless Router
Wireless Hotel Hotspots, Wi-Fi Hotspots and WiFi Wireless Hotel Hotspots. WiFi system for hotel WiFi Hotspots for business hotels.
Computer networks
What is the computer network?
Bunch of computers connected to each other
Now computers do not mean just pc’s.
Now a bunch of computers include printers, cell phones, laptops, etc
Now next question is what do you mean by share data or share information?TYPES OF NETWORKS.Parts of Networks.
2. Final Project Currency Conversion• Resource Appendix A• D.docx
2. Final Project: Currency Conversion
• Resource: Appendix A
• Due Date: Day 7 [Individual] forum
• Consolidate all the sections of the Currency Conversion development documentation:
requirements, design, and testing.
• Incorporate any changes recommended by the instructor.
• Post the assignment as an attachment.
8
Running Head: LAN TOPOLOGY DESIGN AND CABLING SPECIFICATIONS
Appendix B: Network Design Project Template
LAN Topology Design and Cabling Specifications
Theresa A. Nordling
IT 230 Computer Networking
Jay Latona
September 14th, 2008
Executive Summary
{complete during Week Nine}
Write 3-4 paragraphs describing the goals of the network design project, assumptions, pros and cons of the proposed solutions, and project constraints.
Cabling Specifications
{complete during Week Two}
Local Area Network (LAN) Topologies
{complete during Week Two}
Wide Area Network (WAN) Design
{complete during Week Four}
Network Protocols
{complete during Week Six}
Network Remote Access
{complete during Week Six}
Network Business Applications
{complete during Week Six}
Backup and Disaster Recovery
{complete during Week Eight}
Network Security
{complete during Week Eight}
The fictitious company chosen will be a small organization that specializes in merchant services. The fictitious company will deal with check verification, online payments, debit cards, and credit cards. In order for this fictitious company to accomplish these services, the company has established partnerships with major banks and financial institutions, The gained partnerships with the major banks and financial institutions allows access to the partner’s databases. The databases contain listings of people who are known to write bad checks and have abused the banks and other financial institutions online payment services. The company’s ability to access its partner’s databases is imperative to its success; ability in assisting merchants with payment processing at the point of sales. The specialized check verification process will prevent anywhere from 50 to 75% of returned checks, thus reducing fraud and returned checks before they happen. In addition to their check verification services, its online verification software has refined controls to inhibit people from stealing other client’s identities.
The small organization (company) is comprised of four separate departments, these four departments are essential in running an efficient, reliable, and secure network system These departments will be able to communicate with each other efficiently and keep the daily operations running successfully and accurate. The company will need to keep in mind the prevention of fraud, which is why the company designs a strong and reliable network security program. In case of program failure the networking program must provide network access to the majority of its employees through segment and sufficient cabling, thus eliminating the possibility of a decrease of productivity. With all.
Networking slide
Presentation on networking with java code.you can use it for server test,url creating,host name detecting,host ip adress detecting e.t.c.
DescriptionRefer to this resource when completing the Its All .docx
Description:
Refer to this resource when completing the It's All About the HAT assignment.
https://app.webinspector.com/
In this assignment, students will learn to use and identify tools that may be helpful in their navigation of security related events or incidents under investigation.
Web Inspector is a cloud-based service that inspects a website for malware, detects vulnerabilities to being attacked, and protects the organizations through daily malware scanning, blacklist monitoring, and more.
Use Web Inspector to scan a site; when you are done, capture a screenshot and investigate the results under Link Errors, Emails, Structure, and NetSpy. Make sure to provide the name and link to the website downloaded.
Using your choice of hat color, in 750-1,250 words provide different hacking, security methods, and network security protections in the areas of cryptograph, denial of service, spoofing, and worms.
Attach the screenshot, website name, and link to the website downloaded by Web Inspector.
Prepare this assignment according to the guidelines found in the APA Style Guide, located in the Student Success Center.
You are required to submit this assignment to Turnitin.
Social Work Research: Program Evaluation
Major federal legislation was enacted in 1996 related to welfare reform. Financial assistance
programs at the national level for low-income families have been in place since the mid-1960s
through the Aid to Families with Dependent Children (AFDC) program. The Personal
Responsibility and Work Opportunity Reconciliation Act of 1996, or welfare reform, created
TANF (Temporary Assistance for Needy Families). Major components of the new
TANF program were to limit new recipients of cash aid to no more than 2 years of TANF
assistance at a time and to receive no more than 5 years of combined TANF assistance with other
service programs during their lifetimes. The goal was to make public assistance a temporary, rather
than a long-term, program for families with children. Beyond these general rules, each of the 50
states was given substantial latitude to adopt requirements to fit their own objectives. The new law
also allowed states that reduced their public assistance expenses to keep whatever support was
already being provided by the federal government for use at their own discretion. This was seen
as a way to encourage states to reduce welfare dependency.
In response, the state of California decided to call its new program CalWORKs, the California
Work Opportunity and Responsibility to Kids program. CalWORKs is California’s application of
the new TANF federal law. Like most of the other states, CalWORKs provided its 58 counties
with a fair amount of discretion in how to implement the new provisions. Some counties chose to
develop strong upfront “employment-first” rules that mandated recipients be employed as soon as
possible. Others chose a response that included testing and assessment and the provision of.
DescriptionPresentation Assignment – Revised (November 16, 2.docx
Description
Presentation Assignment – Revised (November 16, 2020)
Your assignment is to write a report on how a specific idea or kind of technology developed over time. Your topic must relate to cross-cultural exchange and change over time by studying its use across two world regions (or
cultures
). The report may include images or diagrams where necessary and must use the following three-part format:
Part 1: 300-500 words that describe your topic, the time period you are studying, and location. Also, talk give a general summary of how it changed the society that it originated in.
Part 2: 250-300 words: compare how the idea or technology you are researching was used across at least two cultures or world regions after its invention or discovery.
Part 3: 250-500 words: how is this idea/technology used today? Discuss some applications and review how they are different (or same) than in the earlier history you reviewed above.
Referring to class lectures or readings as sources is not
necessary
. However, you will have to use at least one independent scholarly source (a research article, an academic website, or work). Include a bibliography to cite your sources at the end of your report. You may use the citation style of your choice (APA/Chicago/Harvard…).
Here are some of many possible topics to consider for your report…
Technology: writing (cuneiform, paper, printing); weaponry/warfare (bow, composite bow, cross-bow, gunpowder etc..), navigation (compass, astrolab); transportation (wheel, cart, train); cosmetics (kohl, lipstick); fashion (high-heel shoes)
Ideas: politics (democracy, anarchy, sovereignty, sacred kingship); law (legal codes, rule of law, punishment); religion (monotheism, polytheism, animism, ancestor worship); philosophy (Confucianism, natural law, humanism)
.
More Related Content
Similar to DescriptionYou were selected to design a small peer-to-peer ne.docx
1Running Head Network Design3Network DesignUn.docx
1
Running Head: Network Design
3
Network Design
University Affiliation
Course
Date
Professor
Wide Area Network Design
An enterprise network is a diverse and large network connecting most major points in a company, business or other organization. An enterprise differs from a WAN in that it is privately owned and maintained. There are a variety of WAN technologies to meet the different needs of businesses and many ways to scale the network. An enterprise must subscribe to a WAN service provider to use WAN carrier network services (Paquet, 2013).
In designing of the WAN portion of the network, the first step is to understand the specific network characteristics of the various locations from a Wide Area Network point of view and to then analyze and decide how to implement WAN connectivity at each location. The proposed WAN has specified both possible leased line as well as point to point radio connectivity between sites (Zhang, 2005). It is recommended that the wide area network connection between remote offices should be a point to point radio link. The Plant facility in one location has the capability of using satellite communications or other leased lines for this deployment. Also, for high availability it is recommended that all locations also have site to site redundant links over the Internet through the use of (virtual private network) VPN connectivity. VPN technology will enable organization to create private networks over the public Internet infrastructure that will maintain security and confidentiality. We will use VPNs to provide a virtual WAN infrastructure that connects branch offices to all or portions of their corporate network.
Different applications require varying amounts of network bandwidth the bandwidth required between these sites is dependent upon several factors that include amount of traffic (which varies depending upon the number of users connected to the network), number of hosts, number of network users, protocol being used, potential applications deployed on the network and the network design. For offices with lower bandwidth requirements the most recommended Frame Relay connection should provide no less than 768Kbps while locations with a larger bandwidth requirement will need point to point T1 connections (around 1.54Mbps). To determine which type of connection is appropriate at each location, a list of the approximate number of users and hosts at each site along with the applications they use will be we put in consideration when coming up with the equation for properly determining bandwidth requirements for the network. The required bandwidth in this case will be measured by first determining the amount of space available to transfer data. So for the T1 connections we need to divide 1.54Mbps by 8 to get the number of bytes per second available on the WAN connection. Therefore, a T1 connection will support 192 Mbps. Next, we will determine the amount of bandwidth needed for each application, which.
En35793797
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
BMIS 520IT Infrastructure Project Designing LAN Networks Assign
BMIS 520
IT Infrastructure Project: Designing LAN Networks Assignment Instructions
All labs must be submitted using the version of Packet Tracer in the online course/learning management system. Please do NOT use other versions of Packet Tracer to assure licensing compliance and proper assessment/credit. In addition, please do NOT add users or passwords to any device, leave all credentials blank for assessment purposes.
Project Background
Please reference Figure 1. Friendly Care Hospital is one of the biggest hospitals in DC. You have recently bought the hospital, naming it [Your Firstname Lastname] Hospital. For example, Jane Doe Hospital. Jane Doe Hospital owns a 5-story building and houses many departments that span multiple floors. Its Radiology department is spread across the first and second floors, connected by a dedicated local area network (LAN). The department has recently deployed a new “Radiology Images” application as part of their initiative to digitize patient records. However, the department staff sometimes faces long application delays during busy hours. It also experiences regular delays in Internet connectivity, FTPS services, web services, and email services.
Their original design, depicted in Figure 1, was categorized as a small network, providing services for up to 200-500 devices. They have well surpassed this. You, as their senior network administrator, are tasked with the job of a complete re-design. This design must support a medium to large sized network for over 1,000 devices. Thus, it should surpass the current capabilities.
Figure 1. Current Friendly Care Hospital Network Design
Overview
In this project, you will study performance improvements in a congested, wired LAN/WAN environment that can be solved to varying degrees by a new IT infrastructure design and fully functional implementation in Packet Tracer. To learn more about Packet Tracer please read the Cisco Packet Tracer DS PDF. Later, in Phase II of the project, you will scale this design to a larger enterprise IT infrastructure.
To begin the projects, you will complete a review of related literature to identify what is appropriate to improve system feasibility, RAS (reliability, availability, serviceability), security, and disaster recovery of the existing IT infrastructure and model of your hospital. Once this review of literature is complete, you will use the outcomes and research results to advance and improve the IT infrastructure. Proper data analysis, comparison, and contrast will be summarized within in-text tables and figures as well as appendixes to explain the results of the IT infrastructure re-design and improvement.
Packet Tracer is limited given it is a simulator. Be creative! For instance, if Packet Tracer does not have a file sharing service for a file sharing server, turn on any other related and relevant services that are available. As another example, use LAN and WAN protocols that are optimal given what the ver ...
LAN Architecture Over Fiber Optics.pdf
LAN is a type of networking architecture that helps to connect multiple computers in a single network. This can be done using fiber optic cable. This article describes fiber-optic LAN architecture, common types of fiber optic LAN network, and its advantages.
WiFi Hotspot-Wireless Router
Wireless Hotel Hotspots, Wi-Fi Hotspots and WiFi Wireless Hotel Hotspots. WiFi system for hotel WiFi Hotspots for business hotels.
Computer networks
What is the computer network?
Bunch of computers connected to each other
Now computers do not mean just pc’s.
Now a bunch of computers include printers, cell phones, laptops, etc
Now next question is what do you mean by share data or share information?TYPES OF NETWORKS.Parts of Networks.
2. Final Project Currency Conversion• Resource Appendix A• D.docx
2. Final Project: Currency Conversion
• Resource: Appendix A
• Due Date: Day 7 [Individual] forum
• Consolidate all the sections of the Currency Conversion development documentation:
requirements, design, and testing.
• Incorporate any changes recommended by the instructor.
• Post the assignment as an attachment.
8
Running Head: LAN TOPOLOGY DESIGN AND CABLING SPECIFICATIONS
Appendix B: Network Design Project Template
LAN Topology Design and Cabling Specifications
Theresa A. Nordling
IT 230 Computer Networking
Jay Latona
September 14th, 2008
Executive Summary
{complete during Week Nine}
Write 3-4 paragraphs describing the goals of the network design project, assumptions, pros and cons of the proposed solutions, and project constraints.
Cabling Specifications
{complete during Week Two}
Local Area Network (LAN) Topologies
{complete during Week Two}
Wide Area Network (WAN) Design
{complete during Week Four}
Network Protocols
{complete during Week Six}
Network Remote Access
{complete during Week Six}
Network Business Applications
{complete during Week Six}
Backup and Disaster Recovery
{complete during Week Eight}
Network Security
{complete during Week Eight}
The fictitious company chosen will be a small organization that specializes in merchant services. The fictitious company will deal with check verification, online payments, debit cards, and credit cards. In order for this fictitious company to accomplish these services, the company has established partnerships with major banks and financial institutions, The gained partnerships with the major banks and financial institutions allows access to the partner’s databases. The databases contain listings of people who are known to write bad checks and have abused the banks and other financial institutions online payment services. The company’s ability to access its partner’s databases is imperative to its success; ability in assisting merchants with payment processing at the point of sales. The specialized check verification process will prevent anywhere from 50 to 75% of returned checks, thus reducing fraud and returned checks before they happen. In addition to their check verification services, its online verification software has refined controls to inhibit people from stealing other client’s identities.
The small organization (company) is comprised of four separate departments, these four departments are essential in running an efficient, reliable, and secure network system These departments will be able to communicate with each other efficiently and keep the daily operations running successfully and accurate. The company will need to keep in mind the prevention of fraud, which is why the company designs a strong and reliable network security program. In case of program failure the networking program must provide network access to the majority of its employees through segment and sufficient cabling, thus eliminating the possibility of a decrease of productivity. With all.
Networking slide
Presentation on networking with java code.you can use it for server test,url creating,host name detecting,host ip adress detecting e.t.c.
Similar to DescriptionYou were selected to design a small peer-to-peer ne.docx (20)
1Running Head Network Design3Network DesignUn.docx
1Running Head Network Design3Network DesignUn.docx
BMIS 520IT Infrastructure Project Designing LAN Networks Assign
BMIS 520IT Infrastructure Project Designing LAN Networks Assign
2. Final Project Currency Conversion• Resource Appendix A• D.docx
2. Final Project Currency Conversion• Resource Appendix A• D.docx
More from donaldp2
DescriptionRefer to this resource when completing the Its All .docx
Description:
Refer to this resource when completing the It's All About the HAT assignment.
https://app.webinspector.com/
In this assignment, students will learn to use and identify tools that may be helpful in their navigation of security related events or incidents under investigation.
Web Inspector is a cloud-based service that inspects a website for malware, detects vulnerabilities to being attacked, and protects the organizations through daily malware scanning, blacklist monitoring, and more.
Use Web Inspector to scan a site; when you are done, capture a screenshot and investigate the results under Link Errors, Emails, Structure, and NetSpy. Make sure to provide the name and link to the website downloaded.
Using your choice of hat color, in 750-1,250 words provide different hacking, security methods, and network security protections in the areas of cryptograph, denial of service, spoofing, and worms.
Attach the screenshot, website name, and link to the website downloaded by Web Inspector.
Prepare this assignment according to the guidelines found in the APA Style Guide, located in the Student Success Center.
You are required to submit this assignment to Turnitin.
Social Work Research: Program Evaluation
Major federal legislation was enacted in 1996 related to welfare reform. Financial assistance
programs at the national level for low-income families have been in place since the mid-1960s
through the Aid to Families with Dependent Children (AFDC) program. The Personal
Responsibility and Work Opportunity Reconciliation Act of 1996, or welfare reform, created
TANF (Temporary Assistance for Needy Families). Major components of the new
TANF program were to limit new recipients of cash aid to no more than 2 years of TANF
assistance at a time and to receive no more than 5 years of combined TANF assistance with other
service programs during their lifetimes. The goal was to make public assistance a temporary, rather
than a long-term, program for families with children. Beyond these general rules, each of the 50
states was given substantial latitude to adopt requirements to fit their own objectives. The new law
also allowed states that reduced their public assistance expenses to keep whatever support was
already being provided by the federal government for use at their own discretion. This was seen
as a way to encourage states to reduce welfare dependency.
In response, the state of California decided to call its new program CalWORKs, the California
Work Opportunity and Responsibility to Kids program. CalWORKs is California’s application of
the new TANF federal law. Like most of the other states, CalWORKs provided its 58 counties
with a fair amount of discretion in how to implement the new provisions. Some counties chose to
develop strong upfront “employment-first” rules that mandated recipients be employed as soon as
possible. Others chose a response that included testing and assessment and the provision of.
DescriptionPresentation Assignment – Revised (November 16, 2.docx
Description
Presentation Assignment – Revised (November 16, 2020)
Your assignment is to write a report on how a specific idea or kind of technology developed over time. Your topic must relate to cross-cultural exchange and change over time by studying its use across two world regions (or
cultures
). The report may include images or diagrams where necessary and must use the following three-part format:
Part 1: 300-500 words that describe your topic, the time period you are studying, and location. Also, talk give a general summary of how it changed the society that it originated in.
Part 2: 250-300 words: compare how the idea or technology you are researching was used across at least two cultures or world regions after its invention or discovery.
Part 3: 250-500 words: how is this idea/technology used today? Discuss some applications and review how they are different (or same) than in the earlier history you reviewed above.
Referring to class lectures or readings as sources is not
necessary
. However, you will have to use at least one independent scholarly source (a research article, an academic website, or work). Include a bibliography to cite your sources at the end of your report. You may use the citation style of your choice (APA/Chicago/Harvard…).
Here are some of many possible topics to consider for your report…
Technology: writing (cuneiform, paper, printing); weaponry/warfare (bow, composite bow, cross-bow, gunpowder etc..), navigation (compass, astrolab); transportation (wheel, cart, train); cosmetics (kohl, lipstick); fashion (high-heel shoes)
Ideas: politics (democracy, anarchy, sovereignty, sacred kingship); law (legal codes, rule of law, punishment); religion (monotheism, polytheism, animism, ancestor worship); philosophy (Confucianism, natural law, humanism)
.
DescriptionInfographics represent information in a visual m.docx
Description:
Infographics represent information in a visual manner and can include text, numbers, images, or a mix of the three. Using an infographic is a great way to convey large amounts of information in a unique and effective manner. This is a tool that can be used throughout your student or professional career. You will create an infographic focused on one of the following topics:
1) A specific aspect of populations or urbanization
2) The environment using a sociological lens or
3) Aging using a sociological lens
Objectives:
Explain the key phenomena that significantly influence the various characteristics of population: size, composition, birth rate, and so forth.
Provide detailed examples of urbanization and its impact on populations.
Describe the contributions of the sociological theorists highlighted in the chapter to the study of urbanization.
State ways in which sociology offers unique understandings of the state of our environment
Instructions:
The goal of your infographic is to summarize and convey the key points about your selected topic. Focus on the importance and impact of your topic and possible future trends.
Use a free online infographic creation tool to generate your image. You can select one of the tools listed here:
10 Free Tools for Creating Infographics.
Your audience for this assignment is a group of sociology students in a 100-level college course.
You must include three scholarly citations in your infographic to support your assertions. Two sources must be peer-reviewed journal articles less than five years old, and the third source can be an Internet site.
.
DescriptionIn this activity, you will analyze and study the subj.docx
Description
In this activity, you will analyze and study the subject presented and compose a written response addressing the questions posed. The response should involve research of the subject identified below. In this activity you will use a template in Word® and replace the content with your response while preserving the outline formatting. You will also practice the first few stages of essay writing which includes organizing ideas into main topics and subtopics in outline format. The final deliverable for this assignment is an outline of an essay in development. You will not turn in a completed essay, just the outline. Prior to starting, read the entire assignment below.
Instructions
Preparing
1. Save this example template to your computer (.docx). Open the file and read the document. You will use this document for this activity.
2. Next, review the materials and content below. As you do, take notes of main ideas and supporting points on a piece of paper.
3. When ready to begin the outline in Word, enter information such as the title, your name, etc. into the file. Enter the name of your essay in all capitals within the page header.
Write the outline
1. For the remainder of the outline, the content must contain only your words. Do not quote, paraphrase or borrow content from the sources. Close all source materials before starting. Again, use only your words here. This is not about trying to sound like an expert. Just organize your thoughts and represent them on the outline.
2. Enter your thesis at the top of the first page in sentence format. Think of a thesis statement as a one sentence summary of the essay.
3. Enter a blank space for the introduction. It is suggested to write the introduction after the body and conclusion sections are complete. Many authors prefer this method so you are asked to give it a try here.
4. Enter the main ideas and then under each enter the subtopics in sentence format (this should not be paragraphs). Feel free to delete the existing outline prior to starting.
5. Add a conclusion section also in outline format.
6. The final paper outline must be at least 1.5 pages long. A little longer than that is fine but the response should not be less than 1.5 pages.
Case Information
Computer Input-Output Technologies that Link Pilots and Air Traffic Controllers
Both the Federal Aviation Administration (FAA) and Eurocontrol (Europe’s FAA) actively research, experiment with, and deploy technologies in order to create a safer and more efficient airspace system.
An example is Controller-Pilot Data Link Communications (CPDLC), which in addition to the existing radio, creates a second channel for communication between pilots and air traffic controllers (ATC). Instead of keying the radio, ATC and pilots type instructions and requests and send via text messaging. This reduces ATC workload and frees up the radio channels for important communications.
Figure 1 illustrates The Datalink Control and Display Unit (DCDU) on an Air.
DescriptionImplement a basic Calculator using an Arduino, pus.docx
Description:
Implement a basic Calculator using an Arduino, push buttons/keypad and LEDs
The submission requirements are a
report
,
source code (INO file) for the Arduino
and
link to the tinkercad design
.
https://www.tinkercad.com
follow these instructions :
The calculator must perform at least the basic arithmetic operations ADD, MULTIPLY, SUBTRACT and DIVIDE
the result may be displayed on the serial monitor, although using an LCD component is preferable (LCD will be required for the next project). Bonus points (up to 30%) will be awarded for use of LCD, use of the additional functions FACTORIAL, ODD or EVEN, MODULUS and PRIME FACTORS.
.
DescriptionFor this assignment, students will choose something .docx
Description:
For this assignment, students will choose something (a brand, ongoing PR campaign, product, commercial advertisement etc.) and explore the extent to which that brand/product etc. lives up to the messages and images being portrayed in the public’s domain. Ultimately, I want you to rule if it’s a case of greenwashing or not. Greenwashing is the practice of making an unsubstantiated or misleading claim about the environmental benefits of a product, service, technology or company practice. Greenwashing can make a company appear to be more environmentally friendly than it really is.
.
DescriptionDefend your choice of topic in 500 words or more..docx
Description
Defend your choice of topic in 500 words or more. Include at least 3 expert supporting quotes surrounded by quotation marks and cited in-line. Provide an annotated reference list at the end.
Annotations consist of two paragraphs of at least five sentences each about each of at least five references. The first paragraph should summarize the content of the source and the second are your thoughts or reflections about the source.
Reference citations should be in APA format for the proposal
.
DescriptionDebate on a wide variety of issues in the United.docx
Description
Debate on a wide variety of issues in the United States has become increasingly partisan. This is due in part to the fact that the party platforms have coalesced around positions on sets of issues and have sorted voters based on their relative preferences on these issues. Assignment: Pick two of the following issues and do a little research about how the parties’ average position on that issue has changed over the past twenty years (i.e. the era where partisan polarization has been said to be happening).
The issues are:
● Expanding federal environmental regulation
● Raising tax rates on top earners
● Legalizing gay marriage
● Supporting universal healthcare
● Joining international free trade agreements
● Authorizing domestic surveillance
Recall there are two types of polarization we have talked about:
• Mass polarization- how much the general public is or is not polarizing
• Elite polarization- how much more influential people are or are not polarization (including members of Congress, wealthy Americans, certain political activists, etc)
Choose one of these two types (mass or elite) to focus on, and apply it to both of the issues you chose. If you choose mass, you can use public opinion polls to get an idea of how people are polarizing on an issue. If you choose elite, focus on Congress as a special case (in part because it’s easier to measure, and in part because polarization in Congress have profound consequences). Polarization in Congress can be measured by looking at voting on bills. For example, if in 1973 the House of Representatives votes on a bill, and 130/265 Democrats and 85/170 Republicans vote for a bill, we can say it’s not all that polarized because about 49% of the Democrats and 50% of the Republicans voted for it, meaning they don’t differ very much in their view of the bill. On the other hand, if 90% of Democrats and 15% of Republicans vote yes in 2015, it certainly looks like things have been polarized. This logic using percentages also holds for public opinion data if you choose to talk about mass instead of elite. Keep in mind that you need to compare the past to the present. If you choose elite, then compare a law voted on by Congress before the 1990s to a more recent one (you do this once each for each of the two issues you chose. If you choose mass, then compare public opinion data by party between now and some time further in the past. You can find a ton of valuable polling and survey info through Gallup and Pew’s sites (if you choose mass). If you choose elite, then votes on laws in Congress can be found on their official website. If you’re unsure of a source, ask me first.
.
DescriptionAlpha is the best platform for entertainment to tel.docx
Description
Alpha is the best platform for entertainment to tells your jokes, find fun events, connect with people who share your interests and more. Through this social media platform, users are empowered to post what's on their mind as they interact with the world. Interaction includes direct messages, sharing experiences with hashtags and beyond. Wherever there is popular humor or entertainment we strive for it to occur on Alpha first. Make us your best source for entertainment as many others have across the globe!
Timeline
- Discover what your favorite sports, news, comedic celebrities, and entertainment thought leaders are talking about
- Experience dynamic media — like photos, videos, and GIFs
- Repost, share, favorite, or reply to posts in your timeline
- Write a post to let the world know what’s happening with you
- Create a poll to make your followers interact with it
Explore
- See what hashtags are trending now
- Get caught up on news headlines and videos
- Be in the “know” about entertainment
Notifications
- Find out who started following you!
- Discover which of your posts were favorited or reposted
- Respond to replies or be alerted to posts you were mentioned in
- Discover which of your events people were “interested” or “planned to go”
Messages
- Chat with friends and followers privately by using end-to-end encryption
- Share posts and other media
- Create a group discussion with anyone who follows you
Profile
- Customize your profile with a photo, bio, location, and background photo
- Look back at your posts, reposts, replies, media, polls, jokes and favorites
Connect
- Get suggestions on influential people to follow
- Sync your contacts to find friends currently on Alpha or invite more
Jokes
- Tell your jokes to make others laugh and start a reaction!
Events
- See what events are near you or create one
Alpha Emotional Reactions
- Express your reaction to posts by using “Love, Haha, Wow, Sad, and Angry” emojis
Alpha Voice Notes
- Record your voice as voice note and post it on your profile
A minimum of 250 words each question and References (questions #1- 4) KEEP QUESTION WITH ANSWER
1) How important do you think careers are in shaping our identity? Are you planning to have a one-career life, or do you plan to have several jobs in your lifetime? What would be the advantages and disadvantages of each scenario? Finally, what do you think it might cost (financially, personally, socially) to “have it all”?
2) Is workplace discrimination and ageism still prevalent today? What laws are in place to protect individuals from age discrimination related to employment? List at least five advantages and disadvantages (each) of hiring an older worker.
3) How do relationships change with age? Might Sternberg's triangular theory of love differ between an 18-year-old couple and a 50-year-old couple? Provide examples.
Based on the literature, list six key factors that contribute to healthy relationship dynamics.
4) Some rese.
DescriptionAnalyze the parody of the show. The message bein.docx
Description
Analyze the parody of the show. The message being presented. Does it challenge the status quo? Promote it in someway? What is the cultural capital needed to understand the commentary and message. You can focus on a segment, or the show as a whole. This includes asking how the show is able to present an alternative view on issues, when other news-based shows are unable to do so (and just claiming it is because it is humorous is not complete).
KEY QUESTION: Do satirical news shows challenge the status quo and why?
You will develop an argument using this artifact. It is best to focus on one idea in each paper (such as race, gender, attractiveness, power, etc) and discuss how it relates to the society (this is how you bring in the articles). Use at least 3 references (ASA citation) in each paper (at least 2 from class reader).
REQUIRED: Include your thesis
on your title page.
.
DESCRIPTION530 UNIT 4 QUESTION 3 Examine how knowledge of a.docx
DESCRIPTION
530: UNIT 4: QUESTION 3:
Examine how knowledge of aging can affect all interactions with older adults, including as customers and colleagues
Student: Herbert Porter, Student ID: 57049
Text: Aging Matters: An Introduction to Social Gerontology, Nancy R. Hooyman, Kevin Y. Kawamoto, H. Asuman Kiyak, 2015
.
Description Watch President Ronald Reagan’s 1983 speech to the Na.docx
Description:
Watch President Ronald Reagan’s 1983 speech to the National Association of Evangelicals, perhaps the most explicit presidential endorsement of Christian faith in recent times. As you watch this presentation, prepare and post your written answers to the following speech presentation analysis questions:
What is this speech’s topic?
What is the speech’s thesis or main point?
What in the speech, if anything, suggests the speaker (or his speech writers) had analyzed the audience and adapted the speech to its needs?
Did the speaker use effective and relevant material to support the speech’s thesis?
Was the speech effectively organized?
Did the speaker use clear, interesting, and accurate language?
Was the quality of the speaker’s voice acceptable?
Were the speaker’s movements and gestures meaningful and effective?
You must explain the observations and the reasoning that justify your answers to these questions
. The more thoughtful, detailed, and documented your observations and explanations, the better the quality of your work.
Grading Criteria:
Be sure to satisfy each of the following grading criteria:
Thread
Be sure to provide thoughtful, detailed answers to each of the 8 questions and to support your observations by citing supportive parts of the Reagan speech presentation.
.
Description Total Possible Score 30.00Distinguished .docx
Description:
Total Possible Score: 30.00
Distinguished - Comprehensive Executive Summary that provides a clear synopsis of Task Force Plan and highlights the most
important points.
Proficient - Provides an Executive Summary. Highlighting the most important of the major issues and requirements of Task Force
Plan.
Basic - Basic information was included in the Executive Summary but some major elements were missing.
Below Expectations - The Executive Summary was present but significant elements were missing. There were not enough
details for the reader to understand the major goals of the Task Force.
Non-Performance - The Executive Summary is either nonexistent or lacks the components described in the assignment
instructions.
Distinguished - Provides specific and thorough details on both the current and near term cyber crime threats through the use of
statistics. Identification of the top three priorities for the Task Force and aligns them with the current threats and preparations for
emerging threats.
Proficient - Identifies the major cyber crime threats to St. Louis County through statistical research. Proposes goals for the Task
Force that are well aligned with the current and emerging threats.
Basic - Provides basic information on the current and emerging threats to St. Louis County. Additional analysis on the
relationship to the goals of the Task Force could have made this area stronger.
Below Expectations - Provides few current and/or emerging threats identified but the use of statistical research was lacking. The
identified threats were also not well applied to the priorities of the Task Force.
Non-Performance - The cyber Crime threats in St. Louis Count is either nonexistent or lacks the components described in the
assignment instructions.
Distinguished - Provides comprehensive and specific details of the Task Force structure and equipment needs. Details include
specific equipment suggestions, lab setup requirements as well as specific personnel and skills required. Federal agencies that
may contribute to the Task Force success are identified.
Proficient - Provides comprehensive and specific details of the Task Force structure and equipment needs. Details include
personnel/skills, equipment and systems needed. Identifies the federal agencies that may be needed for assistance. Some
details need further development.
Basic - Provides limited details of the Task Force structure and equipment needs. Details include types of equipment, personnel
or skills required. Presents basic types of federal agencies alliances but identification to specific agencies is unclear.
Below Expectations - Provides some information on Task Force organization, structure. Resource requirements were provided
but there were few specifics as far as types of technology, numbers of personnel or specific federal agencies that could offer
assistance to the new Task Force.
Non-Performance - The Task Force Structure and Equipment Requiremen.
Description Total Possible Score 16.00Distinguished .docx
Description:
Total Possible Score: 16.00
Distinguished - Develops a clear and concise introduction that includes future goals, position and learning environment intended
to work in, and the desired age level to work with.
Proficient - Develops an introduction that includes future goals, position and learning environment intended to work in, and the
desired age level to work with. The introduction is slightly unclear.
Basic - Develops a limited introduction that includes future goals, position and learning environment intended to work in, and the
desired age level to work with. The introduction is unclear.
Below Expectations - Attempts to develop an introduction; however, it does not include future goals, position or learning
environment intended to work in, or the desired age level to work with. The introduction is significantly unclear.
Non-Performance - The introduction is nonexistent or lacks the components described in the assignment instructions.
Distinguished - Intricately discusses how effective, on-going home and community partnerships can support early childhood
curriculum, learners’ development and the learning environment. The discussion is clearly supported with scholarly resources
such as theories, practices, strategies, and/or frameworks.
Proficient - Discusses how effective, on-going home and community partnerships can support early childhood curriculum,
learners’ development and the learning environment. The discussion is supported with scholarly resources such as theories,
practices, strategies, and/or frameworks, but is missing minor details.
Basic - Minimally discusses how effective, on-going home and community partnerships can support early childhood curriculum,
learners’ development, and the learning environment. The discussion is somewhat supported with scholarly resources such as
theories, practices, strategies, and/or frameworks and/or missing relevant details.
Below Expectations - Attempts to discuss how effective, on-going home and community partnerships can support early childhood
curriculum, learners’ development and the learning environment; however, the discussion is not supported with scholarly
resources such as theories, practices, strategies, and/or frameworks and is missing significant details.
Non-Performance - The discussion of how effective, on-going home and community partnerships can support early childhood
curriculum, learners’ development and the learning environment is either nonexistent or lacks the components described in the
assignment instructions.
Distinguished - Clearly articulates the communication and collaboration strategies that will be used and provides a
comprehensive rationale for why the suggested strategies are best for developing and maintaining partnerships. The explanation
is well supported by scholarly sources.
Proficient - Articulates the communication and collaboration strategies that will be used and provides rationale for why the
suggested strategi.
Description The scenario description and requirements for Short.docx
Description: The scenario description and requirements for Short Paper #2:
Prepare a short research paper of approximately 900 to 1000 words, double-spaced, exclusive of cover, title page (optional), table of contents (optional), endnotes and bibliography.
Assume the following incidences happened years ago before there were agreements of cooperation between the US and the Cayman and Nevis Islands. So, neglect, the recent agreements between the US and the Navis Islands government for your analysis
.
Alice changes banks following her troubles with SSB. At her new bank, Acme Security Trust (AST), RSA is used as the cryptographic system. Alice creates a key pair and supplies to Felicity, a bank manager of AST with her public key {eA, nA}, securing her private key {dA, nA} on a thumb drive which Alice keeps locked in a wall safe at her home. In turn, Felicity, a bank manager, who is designated to handle Alice’s business, gave Alice access to a key server maintained by AST so that Alice can readily obtain Felicity’s current public key {eF, nF} whenever she needs to communicate securely with Felicity. Alice has provided her public key to Felicity
Things are fine for a few months until Alice sends Felicity a message m asking about current interest rates on Certificates of Deposit issued by AST. As shown below, she encrypts the message with Felicity’s public key
first
and then signs with her private key.
C = (meF mod nF )dA mod nA
Where C is the encrypted message and m is the plaintext message.
A few days later, Alice received a statement that shows a debit of $1,000,000 from her account. On inquiring, she was told that Felicity transferred the money out of Alice’s account into an account of her own in a bank on the Caribbean island of Nevis, where she subsequently moved. When reached via long distance in Nevis, Felicity produced an encrypted message ’C’ and corresponding plain text message from Alice saying:
"Thanks for your excellent service, Felicity. Please transfer $1,200,000 from my account to yours as a token of my esteem and appreciation. Signed, Alice."
Alice files suit against, Felicity, AST and the government of the Nevis, claiming that the message was a forgery sent by Felicity herself, asking for triple damages for pain and suffering. Felicity has responded by claiming that all procedures were followed properly, and that Alice is filing a nuisance suit.
You have been employed by AST as a an expert to assist in the investigation of this matter and help them decide what to do with Alice’s suit. You obtain Felicity’s private key from the AST server, and the cipher text C, and calculate
g= (CeAmod nA)dFmod nF
Where g is the plain text message which was obtained decrypting the cipher text C, using Felicity’s Private key (dF,nF). Your report to the AST Board of Directors should address the following issues:
From the facts as presented what can be determined about Alice’s intentions to make Felicity a gift of $1,000,000? How d.
Description Research the internet for an example of a violation.docx
Description:
Research the internet for an example of a violation of sensitive information (data breach). Post a summary of the situation and outcome (as well as the source) and evaluate if controls were adequate to prevent the violation. What would you have done to protect the organization from this type of exposure in the future?
.
Description Presentation (500 words + 10minutes)Percentage 40.docx
Description: Presentation (500 words + 10minutes)
Percentage: 40%
Word Count: 10 minutes
Submission: Via Learnline
Relevance Using communication to provide safe care is an integral component of nursing. The national standards that govern the provision of care in acute and aged care centre around communication and ensuring safe and effective care is delivered. The use of ISBAR to communicate and share key information has been shown to be effective in managing and minimising harm in healthcare. ISBAR is a standard communication tool used to share information in acute deterioration. All nurses and training nurses must be aware of this process.
Learning Outcomes
Identify verbal and non-verbal communication strategies and standards that enable therapeutic communication and interprofessional relationships
Explain how cultural sensitivity and cultural safety aid in the establishment of effective communication with Aboriginal and Torres Strait Islander people and other multicultural communities
Demonstrate a high level of written and spoken English according to academic conventions and professional nursing standards.
Demonstrate effective communication through clinical handover and the legal documentation of essential information in healthcare records to ensure patient safety
Task Instructions
Develop and present a 10-minute digital presentation that address the following questions:
Discuss how the ISBAR approach to handover aligns to communicating for safety national standards that govern acute and aged care
Use literature (journal articles, textbooks, research publications and national standards) to support the content
Narrate and elaborate upon the presentation using appropriate literature to support your points
Put the citation on the slides and include a reference list
Use PowerPoint to present the content
Load your Microsoft PowerPoint presentation file onto Learnline, AND
Submit a maximum 500 words script summary
Load your script summary Word Document or PDF file with your Powerpoint presentation onto Learnline
Please note:
It is a student’s responsibility to ensure that the narrated presentation plays and that the audio is clear. The presentation is not to exceed 10 minutes in duration. The presentation should draw on your knowledge of communication and culture you learn from this unit. The word counts of your script summary include the script and your presentation, except the reference list.
Marking Instructions: Please access the marking rubric to ensure that you are maximising your marks in your submission.
.
Description of theNationalMilitary Strategy2018.docx
Description of the
National
Military
Strategy
2018
The Joint Staff
1
Overview
The 2018 National Military Strategy (NMS) provides the
Joint Force a framework for protecting and advancing U.S.
national interests. Pursuant to statute, it reflects a
comprehensive review conducted by the Chairman with the
other members of the Joint Chiefs of Staff and the unified
combatant commanders.
As an overarching military strategic framework, this
strategy implements the substantial body of policy and
strategy direction provided in the 2017 National Security
Strategy, the 2018 National Defense Strategy (NDS), the
Defense Planning Guidance (DPG), and other documents.
The 2018 NMS provides the Chairman’s military advice for
how the Joint Force implements the defense objectives in
the NDS and the direction from the President and the
Secretary of Defense.
The 2018 NMS also reflects lessons learned from
implementing global integration over the last two years. The
strategy articulates a continuum of strategic direction to
frame global integration into three strategy horizons to meet
the challenges of the existing and future security
environment. Force employment addresses planning, force
management, and decisionmaking to fulfill the defense
objectives of the NDS. Force development adapts functions,
capabilities, and concepts to improve the current Joint
Force. Force design innovates to enable the Joint Force to
do what it does differently to retain a competitive advantage
against any adversary.
The vision of the Joint Force articulated in the 2018 NMS is
a Joint Force capable of defending the homeland and
projecting power globally, now and into the future.
2
Strategic Approach
From its global perspective, the NMS premises an adaptive
and innovative Joint Force capable of employing its
capabilities seamlessly across multiple regions and all
domains -- continuing the transition from a regional to a
global mindset and approach.
This strategy
anchors its
approach against a
set of clearly
identified security
trends outlined in
the NDS (see inset).
These trends,
especially those
posed by the
reemergence of
great power
competition with China and Russia, represent the most
difficult challenges facing the Joint Force. However, the full
scope of global integration must recognize uncertainty and
be vigilant for emerging threats to the security and interests
of the United States, its allies and partners. In a security
environment where the homeland is no longer a sanctuary
and every operating domain is contested, competitors and
adversaries will continue to operate across geographic
regions and span multiple domains to offset or erode Joint
Force advantages.
To achieve military advantage over competitors and
adversaries, the NMS introduces the notion of joint
combined arms, defined as the conduct of operational art
through the integration of joint capabilities.
Description of the toolUsages and meritsYour own demonstration.docx
Description of the tool
Usages and merits
Your own demonstration screenshots (if possible)
Drawbacks or liabilities
Methods of circumvention
Language in which tool written
OS targeted / limitations
Reference to the source code as available
I need it after 3 hours from now it should nor exceed 4 or 5 pages but coverring all of the above.
.
Description of the AssignmentThe assignment provides an oppo.docx
Description of the Assignment
The assignment provides an opportunity for the student to:
Develop and leadership profile based on leadership style and personality profile
Apply their leadership profile to advanced communication situations
Develop strategies that will improve and/enhance advanced communication skills
Engage in reflective practice through writing
IV. Preparing the Assignment
Preparing the Assignment
Address all components of the Advanced Communication in Systems Leadership paper as outlined under "Assignment Directions and Criteria".
The paper is graded on quality and completeness of information, depth of thought, organization following outline provided, substantive narrative, use of citations, use of standard English, and writing conventions.
Format:
American Psychological Association. (2010).
Publication manual of the American Psychological Association
(current ed.). Washington, DC: Author. Is the source used for this paper
Required elements
Title page, reference page
Use Microsoft Word
Page numbers, running head, doubles-spaced, times new roman, 12pt font, 1" margins, level 1 headings
Paper length: 6 maximum, excluding reference page, title page, and assessment tool
Scholarly sources
Minimum of four (4) scholarly resources no older than 5 years
Proof-reading
Use spell check and grammar check and correct all errors
Compare final draft to detailed outline directions to ensure all required elements included
Submitting the paper
Submit to Week 2 Assignment portal by Sunday, 11:59 p.m. MT
Must achieve TII score < 24% to be graded
Final submission only will be graded
DIRECTIONS AND ASSIGNMENT CRITERIA
This paper is a reflective practice experience that requires you to describe selected communication experiences, analyze them through the lens of your newly developed leadership profile, and describe implications for future experiences. You will need to draw on knowledge of advanced communication skills as well as past experiences and knowledge in certain communication situations.
Scholarly inquiry into the specified communication types will be needed from at least one (1) peer reviewed journal per situation
. Use the detailed outline found in the Assignment Guidelines with Scoring Rubric document above to organize your paper. The headings included in that document should be used for your paper and represent what is included in a completed paper.
.
More from donaldp2 (20)
DescriptionRefer to this resource when completing the Its All .docx
DescriptionRefer to this resource when completing the Its All .docx
DescriptionPresentation Assignment – Revised (November 16, 2.docx
DescriptionPresentation Assignment – Revised (November 16, 2.docx
DescriptionInfographics represent information in a visual m.docx
DescriptionInfographics represent information in a visual m.docx
DescriptionIn this activity, you will analyze and study the subj.docx
DescriptionIn this activity, you will analyze and study the subj.docx
DescriptionImplement a basic Calculator using an Arduino, pus.docx
DescriptionImplement a basic Calculator using an Arduino, pus.docx
DescriptionFor this assignment, students will choose something .docx
DescriptionFor this assignment, students will choose something .docx
DescriptionDefend your choice of topic in 500 words or more..docx
DescriptionDefend your choice of topic in 500 words or more..docx
DescriptionDebate on a wide variety of issues in the United.docx
DescriptionDebate on a wide variety of issues in the United.docx
DescriptionAlpha is the best platform for entertainment to tel.docx
DescriptionAlpha is the best platform for entertainment to tel.docx
DescriptionAnalyze the parody of the show. The message bein.docx
DescriptionAnalyze the parody of the show. The message bein.docx
DESCRIPTION530 UNIT 4 QUESTION 3 Examine how knowledge of a.docx
DESCRIPTION530 UNIT 4 QUESTION 3 Examine how knowledge of a.docx
Description Watch President Ronald Reagan’s 1983 speech to the Na.docx
Description Watch President Ronald Reagan’s 1983 speech to the Na.docx
Description Total Possible Score 30.00Distinguished .docx
Description Total Possible Score 30.00Distinguished .docx
Description Total Possible Score 16.00Distinguished .docx
Description Total Possible Score 16.00Distinguished .docx
Description The scenario description and requirements for Short.docx
Description The scenario description and requirements for Short.docx
Description Research the internet for an example of a violation.docx
Description Research the internet for an example of a violation.docx
Description Presentation (500 words + 10minutes)Percentage 40.docx
Description Presentation (500 words + 10minutes)Percentage 40.docx
Description of theNationalMilitary Strategy2018.docx
Description of theNationalMilitary Strategy2018.docx
Description of the toolUsages and meritsYour own demonstration.docx
Description of the toolUsages and meritsYour own demonstration.docx
Description of the AssignmentThe assignment provides an oppo.docx
Description of the AssignmentThe assignment provides an oppo.docx
Recently uploaded
Thesis Statement for students diagnonsed withADHD.ppt
Presentation required for the master in Education.
How to Make a Field invisible in Odoo 17
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
A Survey of Techniques for Maximizing LLM Performance.pptx
A Survey of Techniques for Maximizing LLM Performance
Unit 8 - Information and Communication Technology (Paper I).pdf
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Event Link:-
https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-exploring-gemini-ai-and-integration-with-mulesoft/
Agenda
● Java 17 Upgrade Overview
● Why and by when do customers need to upgrade to Java 17?
● Is there any immediate impact to upgrading to Mule Runtime 4.6 and beyond?
● Which MuleSoft products are in scope?
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/
YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Shyam Raj Prasad-
https://www.linkedin.com/in/shyam-raj-prasad/
Digital Tools and AI for Teaching Learning and Research
This Presentation in details discusses on Digital Tools and AI for Teaching Learning and Research
1.4 modern child centered education - mahatma gandhi-2.pptx
Child centred education is an educational approach that priorities the interest, needs and abilities of the child in the learning process.
Supporting (UKRI) OA monographs at Salford.pptx
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH ANSWERS.
How libraries can support authors with open access requirements for UKRI fund...
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
2024.06.01 Introducing a competency framework for languag learning materials ...
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Operation Blue Star - Saka Neela Tara
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Francesca Gottschalk - How can education support child empowerment.pptx
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
Biological Screening of Herbal Drugs in detailed.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
Acetabularia Information For Class 9 .docx
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Best Digital Marketing Institute In NOIDA
Safalta Digital marketing institute in Noida, provide complete applications that encompass a huge range of virtual advertising and marketing additives, which includes search engine optimization, virtual communication advertising, pay-per-click on marketing, content material advertising, internet analytics, and greater. These university courses are designed for students who possess a comprehensive understanding of virtual marketing strategies and attributes.Safalta Digital Marketing Institute in Noida is a first choice for young individuals or students who are looking to start their careers in the field of digital advertising. The institute gives specialized courses designed and certification.
for beginners, providing thorough training in areas such as SEO, digital communication marketing, and PPC training in Noida. After finishing the program, students receive the certifications recognised by top different universitie, setting a strong foundation for a successful career in digital marketing.
Recently uploaded (20)
Thesis Statement for students diagnonsed withADHD.ppt
Thesis Statement for students diagnonsed withADHD.ppt
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdf
Multithreading_in_C++ - std::thread, race condition
Multithreading_in_C++ - std::thread, race condition
A Survey of Techniques for Maximizing LLM Performance.pptx
A Survey of Techniques for Maximizing LLM Performance.pptx
Unit 8 - Information and Communication Technology (Paper I).pdf
Unit 8 - Information and Communication Technology (Paper I).pdf
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Digital Tools and AI for Teaching Learning and Research
Digital Tools and AI for Teaching Learning and Research
1.4 modern child centered education - mahatma gandhi-2.pptx
1.4 modern child centered education - mahatma gandhi-2.pptx
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
How libraries can support authors with open access requirements for UKRI fund...
How libraries can support authors with open access requirements for UKRI fund...
2024.06.01 Introducing a competency framework for languag learning materials ...
2024.06.01 Introducing a competency framework for languag learning materials ...
Francesca Gottschalk - How can education support child empowerment.pptx
Francesca Gottschalk - How can education support child empowerment.pptx
DescriptionYou were selected to design a small peer-to-peer ne.docx
- 1. Description You were selected to design a small peer-to-peer network for a new facility which has six computers and a networked printer. Each desk computer must have a wired network connection. The rooms are to have wireless access for mobile devices. For this assignment, utilize the Gliffy (Links to an external site.)Links to an external site. software application to create a basic network diagram depicting a star topology with a switch as the central communications node. The focus here is on the network communications equipment for this LAN. Include only that equipment and end node devices on the network diagram. There is no need to draw out the layout of the physical space. In addition to providing a network diagram, you must also provide a short essay that describes the details of the LAN equipment that is being used and the connections. In the essay, be sure to explain why each device is positioned where it is. Also, briefly state any assumptions you've made about the kind of work being done, the demands the personnel in the office will put on the network, how they'll use it, and how that influenced your design. For example, if the business that uses the LAN is a small video-based news streaming service, they will probably need more performance from both their network and ISP than a small rental property management office might need. Recommended reading: Understanding Routers, Switches and Network Hardware (Links to an external site.)Links to an external site. Requirements 1. Depict a star topology that uses Ethernet. 2. Provide a 'cloud' shape or another symbol for the ISP WAN service. Label the symbol as 'Dial-up,' 'Cable,' or 'Fiber Optic.' 3. Label all network devices in the LAN (brand and model names are acceptable but not required).
- 2. 4. Connect to the ISP service using a dial-up modem, cable modem, or, if using fiber optic service, an optical network terminal (ONT). Do not use a combination device such as a modem/router. 5. Connect the LAN router (wireless router) to the ISP WAN service device. The LAN router provides many capabilities to include: DHCP (Links to an external site.)Links to an external site., NAT translation (Links to an external site.)Links to an external site., port forwarding (Links to an external site.)Links to an external site., QoS (Links to an external site.)Links to an external site., and software firewall services. Do not use a router/switch combination device, however a router with integrated wireless capabilities is acceptable. 6. Use a managed switch as a centrally-located device to provide wired network connectivity for the seven end nodes (six desktop computers and a printer). Connect the switch directly to the main LAN router. 7. Connect the seven end nodes directly to the central switch. 8. Label the specific type of physical media (cables) being used to connect the LAN router to the ISP service device, the central switch to the LAN router, and the seven end nodes to the central switch. 9. Use a screen capture tool such as Snagit (Links to an external site.)Links to an external site. or the Microsoft Clipping Tool to copy your diagram and paste the copied image into a Word document with the written essay. Optional: · Provide a separate network firewall hardware device in your diagram. Locate the firewall between the ISP WAN device and the LAN router. · To alleviate some of the workloads placed on the LAN router, you could disable the wireless functionality of the LAN router and provide a separate Wireless Access Point (WAP) to provide wireless network access for the mobile devices (cell phones, iPads, etc.). · Connecting the Wireless Access Point (WAP) directly to the
- 3. primary router will enable isolation of the wireless LAN (WLAN). Diagramming software: · Gliffy (Links to an external site.)Links to an external site.: · Use network images: to access, select More Shapes (bottom left menu) > Network > Business · Gliffy User Manual (Links to an external site.)Links to an external site. Your application response is a reflective written assignment relating to the module readings, discussion, and other activities presented. · All work must be original and not taken from Internet sources. · Responses need to be in essay format with an introductory paragraph, body, and conclusion. · The response should be 3-4 paragraphs. · If you refer to ideas on a web site, be sure to include the link to the source. If this is not an electronic source with a link, then list as much information as possible. Description You were selected to design a small peer - to - peer network for a new facility which has six computers and a networked printer. Each desk computer
- 4. must have a wired network connection. The rooms are to have wireless access for mobile devices. For this assignment, utilize the Gliffy (Links to an external site.)Links to an external site. software application to create a basic network diagram depicting a star topology with a switch as the central communications node. The focus here is on the net work communications equipment for this LAN.
- 5. Include only that equipment and end node devices on the network diagram. There is no need to draw out the layout of the physical space. In addition to providing a network diagram, you must also provide a short essay that describes the details of the LAN equipment that is being used and the connections. In the essay, be sure to explain why each device is positioned where it is. Also, briefl y state any assumptions you've made about the kind of work being done, the demands the personnel in the office will put on the network, how they'll use it, and how that influenced your design. For example, if the business that uses the LAN is a small video - based news streaming service, they will probably need more performance from both their network and ISP than a small rental property management office might need. Recommended reading: Understanding Routers, Switches and Network Hardware (Links to
- 6. an external site.)Links to an external site. Requirements 1. Depict a star topology that uses Ethernet. 2. Provide a 'cloud' shape or another symbol for the ISP WAN service. L abel the symbol as 'Dial - up,' 'Cable,' or 'Fiber Optic.' 3. Label all network devices in the LAN (brand and model names are acceptable but not required).
- 7. 4. Connect to the ISP service using a dial - up modem, cable modem, or, if using fiber optic service, an optic al network terminal (ONT). Do not use a combination device such as a modem/router. 5. Connect the LAN router (wireless router) to the ISP WAN service device. The LAN router provides many capabilities to include: DHCP (Links to an external site.)Links to an external site. ,
- 8. NAT tra nslation (Links to an external site.)Links Description You were selected to design a small peer-to-peer network for a new facility which has six computers and a networked printer. Each desk computer must have a wired network connection. The rooms are to have wireless access for mobile devices. For this assignment, utilize the Gliffy (Links to an external site.)Links to an external site. software application to create a basic network diagram depicting a star topology with a switch as the central communications node. The focus here is on the network communications equipment for this LAN. Include only that equipment and end node devices on the network diagram. There is no need to draw out the layout of the physical space. In addition to providing a network diagram, you must also provide a short essay that describes the details of the LAN equipment that is
- 9. being used and the connections. In the essay, be sure to explain why each device is positioned where it is. Also, briefly state any assumptions you've made about the kind of work being done, the demands the personnel in the office will put on the network, how they'll use it, and how that influenced your design. For example, if the business that uses the LAN is a small video-based news streaming service, they will probably need more performance from both their network and ISP than a small rental property management office might need. Recommended reading: Understanding Routers, Switches and Network Hardware (Links to an external site.)Links to an external site. Requirements 1. Depict a star topology that uses Ethernet. 2. Provide a 'cloud' shape or another symbol for the ISP WAN service. Label the symbol as 'Dial-up,' 'Cable,' or 'Fiber Optic.' 3. Label all network devices in the LAN (brand and model names are acceptable but not required). 4. Connect to the ISP service using a dial-up modem, cable modem, or, if using fiber optic service, an optical network terminal (ONT). Do not use a combination device such as a modem/router. 5. Connect the LAN router (wireless router) to the ISP WAN service device. The LAN router provides many capabilities to include: DHCP (Links to an external
- 10. site.)Links to an external site., NAT translation (Links to an external site.)Links