The negative effects of non-renewable fossil fuels have forced scientists to draw attention to clean energy sources which are both environmentally more suitable and renewable. By using the wind energy, power may be produced. The project entitled “Energy Produced by using the Wind Energy” is aimed to produce power with renewable source of energy like wind. In this project by using a small fan blade, electric power is produced by utilizing the drag force of the wind in a moving vehicle. This project aims to design a model for using wind energy to generate electricity which in turn may be used to run electrical utilities directly or through a storage battery.
The negative effects of non-renewable fossil fuels have forced scientists to draw attention to clean energy sources which are both environmentally more suitable and renewable. By using the wind energy, power may be produced. The project entitled “Energy Produced by using the Wind Energy” is aimed to produce power with renewable source of energy like wind. In this project by using a small fan blade, electric power is produced by utilizing the drag force of the wind in a moving vehicle. This project aims to design a model for using wind energy to generate electricity which in turn may be used to run electrical utilities directly or through a storage battery.
Fabrication of Hybrid Petroelectric VehicleIJERA Editor
In automobile sector, the need for alternative fuel as a replacement of conventional fossil fuel, due to its depletion and amount of emission has given way for new technologies like Fuel cells vehicles, Electric vehicles. Still a lot of advancement has to take place in these technologies for commercialization. The gap between the current fossil fuel technology and zero emission vehicles can be bridged by hybrid technology. Hybrid vehicles are those which can run on two or more powering sources/fuels. Feasibility of this technology is been proved in four wheelers and automobile giants like Toyota, Honda, and Hyundai have launched successful vehicles like Toyota prius, Honda insight etc. This technology maximizes the advantages of the two fuels and minimizes the disadvantages of the same. The best preferred hybrid pair is electric and fossil fuel. This increases the mileage of the vehicle twice the existing and also reduces the emission to half. At present, we like to explore the hybrid technology in the two wheeler sector and its feasibility on road. This paper deals with an attempt to make a hybrid with electric start and petrol run. Further a design of basic hybrid elements like motor, battery, and engine. As on today, hybrid products are one of the best solutions for all pollution hazards at a fairly nominal price. An investment within the means of a common man that guarantees a better environment to live in.
A 'gasoline-electric hybrid Vehicle’ or 'hybrid electric vehicle' is a vehicle which relies not only on batteries but also on an internal combustion engine which drives a generator to provide the electricity and may also drive a wheel. It has great advantages over the previously used gasoline engine that drives the power from gasoline only. It also is a major source of air pollution.
BEV ( Battery Operated Electric Vehicles) PPTPranav Mistry
Presentation done on subject of BEV ( Battery Operated Electrical Vehicles) at ARAI ( Automobile Research Association Of India ,Pune) on 4 Th December .2019
electrical vehicle here described on the types of EV i.e. PHEV AND FCEV.An electric vehicle (EV) is a vehicle that is powered by electricity. EVs are either partially or fully powered by electricity. They use an electric motor powered by electricity from batteries or a fuel cell.
Some types of electric vehicles include:
Electric passenger cars
Electric buses
Electric trucks
Electric buggy
Electric tricycles
Electric bicycles
Electric motorcycles/scooters .
EVs have low running costs and are environmentally friendly. They have less moving parts for maintaining and use little or no fossil fuels. All-electric vehicles produce zero direct emissions. FCEVs use a propulsion system similar to that of electric vehicles, where energy stored as hydrogen is converted to electricity by the fuel cell. Unlike conventional internal combustion engine vehicles, these vehicles produce no harmful tailpipe emissions.Plug-in hybrid electric vehicles (PHEVs) use batteries to power an electric motor and another fuel, such as gasoline, to power an internal combustion engine (ICE).Plug-in-hybrid-electric vehicles (PHEVs) are the bridge between traditional gasoline vehicles and strictly battery-powered electrics. In many cases, the PHEV model serves as the performance trim. See, for example, the 302-hp Toyota RAV4 Prime or the 5.0-second-to-60-mph Lincoln Aviator Grand Touring.Like all-electric vehicles, fuel cell electric vehicles (FCEVs) use electricity to power an electric motor. In contrast to other electric vehicles, FCEVs produce electricity using a fuel cell powered by hydrogen, rather than drawing electricity from only a battery.Why is FCEV better?
Fuel cell vehicles are more efficient than combustion engines – a typical FCEV has about a 300 mile range. Similar to electric vehicles and hybrid technologies, their regenerative braking system is capable of capturing energy lost during braking and storing it in the battery.Battery Electric Vehicles (BEV) rely solely on a battery to power the car. Plug-In Hybrid Electric Vehicles (PHEV) have both batteries and an internal combustion engine (ICE) that work together or separately to power the car. Fuel Cell Electric Vehicles (FCEV) produce power from a hydrogen fuel cell in the car. PHEV (Plug-in Hybrid Electric Vehicle)
They are similar to HEVs but have a bigger battery pack and electric motor.
Read more about these types of EVs in the following sections.
1. Battery Electric Vehicle (BEV)
Vehicles powered solely by one or more electric batteries are known as BEVs. They are more popularly called EVs. Chargeable batteries power them, and there is no IC engine (petrol or diesel-powered). All the power comes from the battery pack, which is chargeable from the electricity grid. The charged battery pack sends power to one or more electric motors to move the vehicle.
Components of BEV
Battery pack
Electric motor(s).PHEVs are an extended form of HEVs. They have an internal combustion engine and an electric motor. However
Regenerative braking is an energy recovery mechanism that slows down a moving vehicle or object by converting its kinetic energy into a form that can be either used immediately or stored until needed. In this mechanism, when we apply the brake, this system slow down the vehicle and the speed of wheels are in form of rotational energy that is mechanical energy, which transfer to generator where the mechanical energy is converted
into electrical energy and eventually which is stored in the battery.
In a world where environment protection and energy conversion are growing concerns,the development of solar vehicle has taken on an accele ration pace. The dream of having commercially viable solar vehicle is becoming a rea lity. EV�s are gradually available in the market. This opportunity is taken towards design an d development of Solar two wheeler. Solar vehicle is a multi-disciplinary subject which covers broad and complex aspects. However,it has core technologies,namely propulsio n technology,energy source technology,storage and control technology. As energy source s olar panel is used and developed voltage is stored in battery and used for the drive the hub motor which is used as rare wheel of the vehicle.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Fabrication of Hybrid Petroelectric VehicleIJERA Editor
In automobile sector, the need for alternative fuel as a replacement of conventional fossil fuel, due to its depletion and amount of emission has given way for new technologies like Fuel cells vehicles, Electric vehicles. Still a lot of advancement has to take place in these technologies for commercialization. The gap between the current fossil fuel technology and zero emission vehicles can be bridged by hybrid technology. Hybrid vehicles are those which can run on two or more powering sources/fuels. Feasibility of this technology is been proved in four wheelers and automobile giants like Toyota, Honda, and Hyundai have launched successful vehicles like Toyota prius, Honda insight etc. This technology maximizes the advantages of the two fuels and minimizes the disadvantages of the same. The best preferred hybrid pair is electric and fossil fuel. This increases the mileage of the vehicle twice the existing and also reduces the emission to half. At present, we like to explore the hybrid technology in the two wheeler sector and its feasibility on road. This paper deals with an attempt to make a hybrid with electric start and petrol run. Further a design of basic hybrid elements like motor, battery, and engine. As on today, hybrid products are one of the best solutions for all pollution hazards at a fairly nominal price. An investment within the means of a common man that guarantees a better environment to live in.
A 'gasoline-electric hybrid Vehicle’ or 'hybrid electric vehicle' is a vehicle which relies not only on batteries but also on an internal combustion engine which drives a generator to provide the electricity and may also drive a wheel. It has great advantages over the previously used gasoline engine that drives the power from gasoline only. It also is a major source of air pollution.
BEV ( Battery Operated Electric Vehicles) PPTPranav Mistry
Presentation done on subject of BEV ( Battery Operated Electrical Vehicles) at ARAI ( Automobile Research Association Of India ,Pune) on 4 Th December .2019
electrical vehicle here described on the types of EV i.e. PHEV AND FCEV.An electric vehicle (EV) is a vehicle that is powered by electricity. EVs are either partially or fully powered by electricity. They use an electric motor powered by electricity from batteries or a fuel cell.
Some types of electric vehicles include:
Electric passenger cars
Electric buses
Electric trucks
Electric buggy
Electric tricycles
Electric bicycles
Electric motorcycles/scooters .
EVs have low running costs and are environmentally friendly. They have less moving parts for maintaining and use little or no fossil fuels. All-electric vehicles produce zero direct emissions. FCEVs use a propulsion system similar to that of electric vehicles, where energy stored as hydrogen is converted to electricity by the fuel cell. Unlike conventional internal combustion engine vehicles, these vehicles produce no harmful tailpipe emissions.Plug-in hybrid electric vehicles (PHEVs) use batteries to power an electric motor and another fuel, such as gasoline, to power an internal combustion engine (ICE).Plug-in-hybrid-electric vehicles (PHEVs) are the bridge between traditional gasoline vehicles and strictly battery-powered electrics. In many cases, the PHEV model serves as the performance trim. See, for example, the 302-hp Toyota RAV4 Prime or the 5.0-second-to-60-mph Lincoln Aviator Grand Touring.Like all-electric vehicles, fuel cell electric vehicles (FCEVs) use electricity to power an electric motor. In contrast to other electric vehicles, FCEVs produce electricity using a fuel cell powered by hydrogen, rather than drawing electricity from only a battery.Why is FCEV better?
Fuel cell vehicles are more efficient than combustion engines – a typical FCEV has about a 300 mile range. Similar to electric vehicles and hybrid technologies, their regenerative braking system is capable of capturing energy lost during braking and storing it in the battery.Battery Electric Vehicles (BEV) rely solely on a battery to power the car. Plug-In Hybrid Electric Vehicles (PHEV) have both batteries and an internal combustion engine (ICE) that work together or separately to power the car. Fuel Cell Electric Vehicles (FCEV) produce power from a hydrogen fuel cell in the car. PHEV (Plug-in Hybrid Electric Vehicle)
They are similar to HEVs but have a bigger battery pack and electric motor.
Read more about these types of EVs in the following sections.
1. Battery Electric Vehicle (BEV)
Vehicles powered solely by one or more electric batteries are known as BEVs. They are more popularly called EVs. Chargeable batteries power them, and there is no IC engine (petrol or diesel-powered). All the power comes from the battery pack, which is chargeable from the electricity grid. The charged battery pack sends power to one or more electric motors to move the vehicle.
Components of BEV
Battery pack
Electric motor(s).PHEVs are an extended form of HEVs. They have an internal combustion engine and an electric motor. However
Regenerative braking is an energy recovery mechanism that slows down a moving vehicle or object by converting its kinetic energy into a form that can be either used immediately or stored until needed. In this mechanism, when we apply the brake, this system slow down the vehicle and the speed of wheels are in form of rotational energy that is mechanical energy, which transfer to generator where the mechanical energy is converted
into electrical energy and eventually which is stored in the battery.
In a world where environment protection and energy conversion are growing concerns,the development of solar vehicle has taken on an accele ration pace. The dream of having commercially viable solar vehicle is becoming a rea lity. EV�s are gradually available in the market. This opportunity is taken towards design an d development of Solar two wheeler. Solar vehicle is a multi-disciplinary subject which covers broad and complex aspects. However,it has core technologies,namely propulsio n technology,energy source technology,storage and control technology. As energy source s olar panel is used and developed voltage is stored in battery and used for the drive the hub motor which is used as rare wheel of the vehicle.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
2. AIM AND OBJECTIVE
Aim:
• To develop a solar powered car
Objectives:
• To develop a car that utilize renewable energy and is environmental friendly
• To develop a solar powered car with a speed of 30 km/hr.
• To develop a solar powered car using locally sourced materials.
3. PROBLEM STATEMENT
The overly usage of gasoline cars in the transportation sector has
imposed loads of hazards to the human environment this include
pollution, unnecessary hike in fuel prices causing fuel crisis, global
warming etc.
This shocking result of fossil energy is getting disturbing, as such the
requirement for an alternative energy source has become necessary even
in the transportation sector.
6. INTRODUCTION
The automotive industry is one of the largest dependent on traditional
energy source. Most of the technologies are built to run using fossil
fuels which are unsustainable and hazardous to the human environment.
The considerable risk in them has necessitated the automotive
industries to also sort for an alternative and thereby probing researches
on renewable energy technology.
Science has sought to bring this idea to reality, as far back as the 17th
century.
Some of the notable works in this regard include, the sunswift eve,
tesla’s electric cars and the solar impulse.
The power of the sun is been harnessed to turn the wheels of
automobile vehicle using solar cells (photovoltaic). Uncovering this
application of solar energy and many other applications
7. MATERIALS AND METHODS
Fundamental components of a solar powered car include:
• The photovoltaic arrays
• The electric motor (clean engine)
• Battery bank
• A light frame work (chassis)
13. CONCLUSION
It is clear that this project was able to get acquainted with this
new area of photovoltaic solar energy application.
Unfortunately, the project could not be brought to a full
completion due to low budget and limited mechanical
engineering expertise. Components and equipment purchased
for the development of the solar-powered car were fully
utilized in building and testing of the solar car.
14. RECOMMENDATION
Obviously, this solar technology still needs improvement in order to
achieve higher performance, further works such as the electrical
installations which would include the battery, photovoltaic panels,
motor and motor controller is necessary.
Further testing to ascertain the efficiency of the car is also
recommended and in subsequent design of the solar-powered car, a
lighter material such as aluminum should be used in building the
frame/chassis. A more efficient and light weight electric motor should
be utilized.