This curriculum vitae outlines the educational and professional experience of Salim Istyaq. He holds a B.Sc. in Engineering (Computer), M.Tech. in Communication & Information Systems, and is enrolled in a Ph.D. program. He has over 13 years of teaching experience and has taught in India and Libya. He has published several papers in international journals and conferences and participated in various workshops and training programs.

1. 1
CURRICULUM-VITAE
SALIM ISTYAQ
B.Sc. Engineering (Computer), M.TECH. (Communication & Information Systems)
Enrolled in Ph.D.(Computer Engineering) on 28-09-2015 in A.M.U. Aligarh-(U.P.)-India
(University under Central Government of India)
Office Address:
Assistant Professor
Computer Engineering, University Polytechnic,
A.M.U. Aligarh-202002-U.P.(India)
Mobile No. +919412563748
Email: saleemishtiyak@gmail.com
Teaching Experience: “13”years & “06”months
1. Currently working as Assistant Professor Computer Engineering, University Polytechnic, Faculty
of Engg & Tech, Aligarh Muslim University, Aligarh-202002-India since 1st June-2004 to till date.
2. Worked as Guest Faculty in Electronics & Communications Engg in Jamia Millia Islamia, New
Delhi-110025 (University under Central Government of India) since 01/02/2003 to 25/05/2004.
3. Foreign Teaching Experience: Worked as Lecturer in Computer Engineering in the Department of
Electrical Engg. El-Mergheb University, Al-Khoms, Libya since 01/11/2009 to 31/08/2010.
Member
* Member of B.O.S. Computer Engineering, University Polytechnic, GLA University, Mathura since July,
2016.
1. Reviewer of International Journal of Computer Science & Systems Biology (IJCSB).
http://www.editorialmanager.com/systemsbiology/default.aspx
2. Reviewer of ARSEAM (Academic Research In Science, Engineering , Art and Management)
http://www.arseam.com/content/salim-istyaq-amu-aligarh-india
3. Editorial Board Member in (IJETAE) International Journal of Emerging Technology & Advanced
Engineering (ISSN 2250-2459, ISO 9001:2008 Certified Journal) from May, 2016 onwards.
4. Member of World Academy of Science, Engineering and Technology (WASET) for International Journal
of Computer and Information Engineering from 27 May, 2016.
Publications
1. International Conference: 01 (IEEE: 01), A.M. Abbas, S. Istyaq “Multiple Attempt Node-Disjoint Multipath
Routing for Mobile Adhoc Networks”, Proceedings of Third IEEE International Conference on Wireless and Optical
Communication Networks (WOCN), April 11-13, 2006, Bangalore, India.

2. 2
2. Paper in International Journal of Biological and Life Sciences, Towfeeq Fairooz, Salim Istyaq titled as
“Performance Evaluation of Complex Electrical Bio-Impedance from V/I Four Electrode
Measurements”.
3. Paper in International Journal on Computer Science and Engineering (IJCSE), Salim Istyaq, Aufaq
Zargar titled as “Debugging, Advanced Debugging and Runtime analysis”.
4. International Conference (IEEE), Soriful Hoque, Salim Istyaq, Md. Mushir Riaz “AHierarchical
Approach for Clustering and Pattern Matching of Gene Expression Data”, Proceedings of Sixth
International Conference on Genetic and Evolutionary Computing, August 25-28, 2012, Kitakyushu, Japan.
5. Paper in International Journal of Advanced Research in Computer Science Engineering and Information
Technology (IJARCSEIT), Soriful Hoque, Salim Istyaq, Md. Mushir Riaz, titled as “A Clustering Method
For seismic Zone Identification And Spatial Data Mining”, Volume 3, Issue 2, Nov-2013.
6. Paper in International Journal of Computer Sciences and Engineering (IJCSE), Salim Istyaq, Lovish
Kumar titled as “A New Technique For User Authentication Using Numeric One Time Password
Scheme”, Volume-4, Issue-5, pp 163-165, May-2016.
7. Paper in International Journal of Computer Science Engineering and Information Technology Research
(IJCSEITR), Salim Istyaq titled as “A New Approach of Graphical Password with Integration of Audio
Signature Combination of Recall and Recognition”, ISSN(P): 2249-6831; ISSN(E): 2249-7943, Vol. 6,
Issue 4, Aug 2016, 45-50.
Orientation Programme & Refresher Courses
1. UGC Sponsored Orientation Programme from 22.3.06-21.4.06 (One Month) at UGC Academic Staff
College, AMU, Aligarh, India.
2. UGC Sponsored Refresher Course from 18.11.07-08.12.07 (21 Days) at UGC Academic Staff College,
AMU, Aligarh, India.
3. Course on “Communication Skills and Academic Writings” from 20.02.06-1.03.06 at UGC Academic
Staff College, AMU, Aligarh, India.
4. UGC Sponsored Special Winter School (OP/Refresher Course) from 31.12.08-21.01.09 (21 Days) at
UGC Academic Staff College, AMU, Aligarh, India.
5. UGC Sponsored Special Summer School (OP/Refresher Course) from 12.08.14-03.09.14 (21 Days) at
UGC Academic Staff College, AMU, Aligarh, India.
Short Term Courses By UGC Academic Staff College, A.M.U. Aligarh
1. Personality Development and Communication Skills (19 .11.2014 to 25.11.2014)
2. Academic Writing Skills (05.12.2014 to 11.12.2014)

3. 3
3. Your Health Well Being (15.12.2014 to 21.12.2014)
4. Management of Educational Institutions (16.01.2015 to 22.01.2015)
5. Stress Management (18.03.2015 to 24.03.2015)
6. Academic Writing (05.08.2015 to 11.08.2015)
7. Data Analysis / SPSS & R (09.09.2015 to 15.09.2015)
8. Research Methodology: Geography (10.12.2015 to 16.12.2015)
Workshops Attended
1. Workshop on “Environment and Pollution Awareness” (27 Nov, 2004) organized by AICTE at
University Polytechnic, AMU, Aligarh, India.
2. Workshop on “Blue tooth wireless Technology” (10-11 Feb05) under AICTE Project on
Networking of Appliances through Wireless Communication at Deptt. of Electronics Engg. AMU,
Aligarh, India.
3. Workshop on “Signal Processing Applications in Network Multimedia” (19 March, 2005)
organized by DRS programme, Deptt. of Electronics Engg. AMU, Aligarh, India.
4. Workshop on “Advances in Wireless Networks” (17 Jan, 2006) organized by DRS programme,
Deptt. of Electronics Engg. AMU, Aligarh, India.
5. Workshop on “Advances in Wireless Networks” (17 Jan, 2008) organized by DRS programme,
Deptt. of Electronics Engg. AMU, Aligarh, India.
6. National Seminar attended on “Role of Electronics in the development of Modern Industries”
held on 31/12/2008 organized by Shanti Jankalyan Sansthan, Shahjahanpur, Lucknow.
7. Workshop attended on “Multimedia and Its Applications” held on 21-22/03/2009 at Women’s
Polytechnic, AMU, Aligarh.
8. Workshop attended on “Information Technology-Prospectus & Challenges” held on 14-
15/02/2015 at Women’s Polytechnic, AMU, Aligarh.
9. Workshop attended on “Make in India: Opportunities and Challenges for Engineers” held on
28/03/2016 at Women’s Polytechnic, AMU, Aligarh.
10. Workshop attended on “Advanced Embedded System” held on 29th
Feb.-4th
Mar. 2016 at Z.H.C.E.T.
A.M.U. Aligarh.

4. 4
Workshop Organized on the theme “Make in India: Opportunities and Challenges for Engineers” held
on 28/03/2016 at Women’s Polytechnic, AMU, Aligarh.
Short Term Courses / Training Programmes outside A.M.U. Aligarh
1. “Local Area Networking” conducted (from 20/10/2004-23/10/2004) by National Institute for
Technical Teachers Training, Chandigarh.
2. “Mobile Computing” (from 10/10/05-14/10/05) conducted by National Institute for Technical
Teachers Training, Chandigarh.
3. “PLC & Its Applications” (from 17/01/2005-21/01/05) conducted by National Institute for Technical
Teachers Training, Chandigarh.
4. “Linux Server Administration” (from 13/11/2006-17/11/2006) conducted by National Institute for
Technical Teachers Training, Bhopal.
5. “Multimedia Technology” (from 22/05/06 –26/05/06) conducted by National Institute for Technical
Teachers Training, Chandigarh.
6. A Short term Course on “Repair & Maintenance of UPS & SMPS” from 13/07/2009 to
17/07/2009 at NITTTR, Chandigarh.
Certificate Courses
1. Certificate Course on “C” Programming of duration: 15/07/1997 to 15/09/1997 from NTG, Aligarh.
2. Certificate Course on “Auto-Cad” of duration: 12/04/2001 to 11/07/2001 from PCC, Aligarh.
University Education
M.TECH.(Communication & Information systems) Passed with approx. 69% marks (First Division) in
2001 from Aligarh Muslim University, Aligarh, India.
Dissertation: “An Algorithm For Fault Free Sub cubes In Hypercube Multiprocessor”.
Brief Summary: This dissertation attempts to provide strategies to overcome the effects of faulty elements
and simulate a fault-free architecture on the faulty system. The problem of determining the number of
faulty processors and faulty links in an n-cube such that no m-cube is fault-free is considered. Yang and
Tien also used the sub cube portioning technique to effectively achieve the embedding of rings, routing
and global operations in faulty hyper cubes. We study how to allocate sub cubes in the faulty hypercube
and thus maintain the multitasking capability of the system. By using the sub cubes partitioning techniques
, a sub cube is first selected and then the faults in the selected sub cubes are replaced by the fault free
neighbours in other sub cubes. We first discuss the allocation with two faults since in the worst case, two
faults in an n-cube are sufficient to destroy every possible regular (n-1) cube. The sub cube portioning
technique used for a two fault case is also applied to overcome the situation with more than two faults.
Finally, we develop a two phase fault tolerant sub cube allocation strategy in the presence of faults. The

5. 5
first phase is the reconfiguration process based on the sub cube portioning technique which finds the set of
disjoint sub cubes in a faulty hypercube. The second phase applies an existing fault free sub cube
allocation strategy.
B.Sc. Engineering (Computer): Passed with approx. 67% marks (First Division) in 1996 from Aligarh
Muslim University, Aligarh, India.
B.Sc. Engineering (Computer) Project:
Project:. “Design Of Adaptive Routing For Distributed Network”
Brief Summary: In this project we conclude that message routing in networks directly determine
message delays through the network. The objective of a routing algorithm is to deliver messages in
the shortest possible time. Routing schemes can be classified as fixed or dynamic, deterministic or
adaptive and centralize or distributed however, fixed or deterministic routing strategies, which
employ centralized techniques are usually considered for networks with predictable loads. A
reliable network should provide alternate routes for message transmission in order to handle such
conditions as link or node failure. Reliability is an important consideration for network that is
exposed to node or link failures. It can also be important for business considerations. Such as for
an airline reservation network requiring 24 hour uninterrupted service.
Diploma in Engineering (Electrical): Passed with First Division (Honours) 82.7% marks in 1990
from Aligarh Muslim University, India.
Secondary Education
Intermediate (XII): 1986
Passed Class XII (Intermediate) from U. P. Board (Allahabad), India with First Division (Honours) 75.6% of
marks with distinction in Mathematics, Physics, and Chemistry.
Subject studied: English, Hindi, Mathematics, Physics and Chemistry.
High School (X): 1984
Passed Class X (High School) from U. P. Board (Allahabad) India with Second Division 57.17% of marks
Subjects studied: English, Hindi, Mathematics, Science, Social Science and Biology.
Some of the Theory courses I taught at UG :
UG:
 Programming In “C”
 Basic Electronics
 Computer Graphics
Practical Courses:
1. Digital Circuits & Systems
2. Analog Integrated Circuits & Systems
3. Analog Filter & Signal Processing
4. Computer Software Lab.
5. Computer Hardware Lab.

6. 6
Courses taught at Diploma in Computer Engg:
Theory Courses:
Practical Courses:
Awards and Scholarships
 Recipient of prestigious Scholarship from IDB Saudi Arab for a period of 4 years during B.Sc.
Engg.(Computer).
 Recipient of prestigious Scholarship from SST, Aligarh for a period of 2 years.
 Award of full fee concession throughout the study in A.M.U Aligarh
Research Contributions:
 Diploma in computer Engg Projects:
 Completed: 50
List of few Projects under my supervision of Diploma in Computer Engg (Final Year)
1. Software Package For Exam Tabulation and Mark sheet of University polytechnic, A.M.U.
Aligarh
2. Software Package For Library Information System of University polytechnic, A.M.U. Aligarh
3. Software Package For Time Table For University Polytechnic
4. Website Development For University Polytechnic, A.M.U. Aligarh
5. Software Package For Accounts of Food Craft Institute, A.M.U. Aligarh
6. Software Package For Attendance of University polytechnic, A.M.U. Aligarh
7. “C” Program Modifier
8. File Management in “C”
9. Adaptive Routing for the Distributed system
10. Railway Information System
11. Encyclopaedia to Computers
12. Railway Schedule System
13. Updated Website Development For University Polytechnic, A.M.U. Aligarh
14. Updated Software Package For Library Information System of University polytechnic, A.M.U.
Aligarh
15. PC protection against unauthorized access etc.
1. Computer Graphics
2. Software Engineering
3. Operating Systems
1. Computer Workshop
2. Programming Lab-III
3. Programming Lab-II
4. Projects in Diploma in Engg (Final Yr. Computer Engg)

7. 7
Administrative &Allied Duties
1. Appointed as an examiner for Software Lab. (B.Tech., 3rd
Yr.), MIT, New Delhi.
2. Appointed as an examiner for Hardware Lab. (B.Tech., 3rd
Yr.), MIT, New Delhi
3. Appointed as an examiner for Programming Lab. (Dip.In Computer Engg 3rd
Yr.), Jamia Millia
Islamia, New Delhi.
MODROB Prepared proposal for MODROB(Modernization & Removal of Obsolescence)
which was successfully sanctioned by AICTE in 2004-2005.
Tabulator Worked as Tabulator for Diploma in Leather & Footwear Technology in 2006 and
now for Diploma in Computer & Electronics Engg from 2007 to 2009 and again 2010 to till date.
Scrutinizer Working as scrutinizer in Applied Science Section and Electrical engg Section from 2004 to
till date.
Scrutiny Officer Worked as scrutiny officer for admission forms of Diploma in Engg.
Paper Moderator Working as paper Moderator for Examination of Diploma in Computer/Electronics Engg.
WARDEN Working as Warden R.M. Hall from 15th
July, 2007 to 30th
October, 2009 and
September, 2010 to January, 2011. under supervision of Provost Dr. Mubin Ahmad and remain
under Prof. Nawab Ali khan. (Approx. more than 2 and half years) and 1 year under
supervision of Mr. Azhar Jameel.
A.T.P.O. Worked as Assistant Placement Officer for 2 years in University Polytechnic for
Electrical Engg Section which includes four branches e.g. Computer Engg, Electronics Engg,
Electrical Engg and Instrumentation.
Computer Lab Incharge Working as Computer Lab Incharge of four labs (Three Computer labs in
main building) of University Polytechnic, A.M.U. Aligarh since 2008 to till date.
Tour Incharge Worked as Tour In-Charge in 2006-2008 for Diploma in computer and Electronics
Engg (Final year).
Extra Curricular Activities Teaching at Nodal Centre ,Community Polytechnic about the short term
course of duration of 2 months each “Computer Assembly & Maintenance” more than 1 year.

8. 8
Syllabi Modification of Diploma in Computer Engg(Final Year) in 2005-2006
1. Computer Graphics(BLC-307)
2. Computer Communication Networks(BLC-302)
3. Operating System & Compiler design(BLC-305)
4. Software Engg (BLC-303)
5. Data Base Management Systems(304)
Syllabi Preparation for Diploma in Computer Engg Semester System in 2012-13
Design of Course structure, Commencement of new theory papers in semester system, New practical labs etc.
Course Advisor: Diploma in Computer Engineering for all semesters since 2014-15.
Project Coordinator: Diploma in Computer Engineering for V and VI semesters since August
2015.
Referees
 Dr. Sarosh Umar (Professor, Chairman), Department of Computer Engg., AMU, Aligarh,
India
 Dr. Ekram Khan (Professor), Department of Electronics Engg., AMU, Aligarh, India.
DECLARATION
I certify that above information is correct and complete to the best of my knowledge.
Place: Aligarh (India) Dated-01-08-2016
(Salim Istyaq)
Assistant Professor
Computer Engineering
University Polytechnic
Faculty of Engineering & Technology
A.M.U. Aligarh
Email id: saleemishtiyak@gmail.com
Mobile No. +919412563748
_______________________