This document summarizes the qualifications and experience of Rakesh Kumar S, a structural engineer. Over the past 6 years, he has gained expertise in designing buildings, bridges, and metro rail structures. Some of his project experience includes detailed design of viaduct structures for the Hyderabad and Bangalore metro rail projects, as well as underground metro stations in Chennai. He is proficient with structural design software like STAAD Pro and MIDAS Civil. Rakesh is pursuing chartership with the Institution of Structural Engineers and actively participates in continuing education opportunities.
Dear Sir
I have worked in projects of Qatar rail, Dubai parks, Delhi metro in design of metro stations, Viaducts, Steel Structures, Buildings etc.
I have worked in design engineering, form consultant's end as well as contractors end and have been exposed to variety of aspects related to Structural Engineering.
It would be a great learning experience for me to work your organization and hence sharpen my technical skills further.
Presently I am in Qatar and have worked in Qatar,UAE and India .
Book for Beginners, RCC Design by ETABSYousuf Dinar
Advancement of softwares is main cause behind comparatively quick and simple
design while avoiding complexity and time consuming manual procedure. However
mistake or mislead could be happened during designing the structures because of not
knowing the proper procedure depending on the situation. Design book based on
manual or hand design is sometimes time consuming and could not be good aids with
softwares as several steps are shorten during finite element modeling. This book may
work as a general learning hand book which bridges the software and the manual
design properly. The writers of this book used linear static analysis under BNBC and
ACI code to generate a six story residential building which could withstand wind load
of 210 kmph and seismic event of that region. The building is assumed to be designed
in Dhaka, Bangladesh under RAJUK rules to get legality of that concern organization.
For easy and explained understanding the book chapters are oriented in 2 parts. Part A
is concern about modeling and analysis which completed in only one chapter. Part B
is organized with 8 chapters. From chapter 1 to 7 the writers designed the model
building and explained with references how to consider during design so that
creativity of readers could not be threated. Chapter 8 is dedicated for estimation. As a
whole the book will help the readers to experience a building construction related all
facts and how to progress in design. Although the volume I is limited to linear static
analysis, upcoming volume will eventually consider dynamic facts to perform
dynamic analysis. Implemented equations are organized in the appendix section for
easy memorizing.
BNBC and other codes are improving and expending day by day, by covering new
and improved information as civil engineering is a vast field to continue the research.
Before designing something or taking decision judge the contemporary codes and
choose data, equations, factors and coefficient from the updated one.
Book for Beginners series is basic learning book of YDAS outlines. Here only
rectangular grid system modeling and a particular model is shown. Round shape grid
is avoided to keep the study simple. No advanced analysis is described and it is kept
simple for beginners. Only two way slab is elaborated with direct design method,
avoiding other procedures. In case of beam, only flexural and shear designs are made.
T- Beam, L- Beam or other shapes are not shown as rectangular beam was enough for
this study. Bi-axial column and foundation design is not shown. During column and
foundation design only pure axial load is considered. Use of interaction diagram is not
shown in manual design. Load centered isolated and combined footing designs are
shown, avoiding eccentric loading conditions. Pile and pile cap design, Mat
foundation design, strap footing design and sand pile concept are not included in this
Analysis and Design of Structural Components of a Ten Storied RCC Residential...Shariful Haque Robin
This report has been prepared as an integral part of the internship program for the Bachelor of Science in Civil Engineering (BSCE) under the Department of Civil Engineering in IUBAT−International University of Business Agriculture and Technology. The Dynamic Design and Development (DDD) Ltd. nominated as the organization for the practicum while honorable Prof. Dr. Md. Monirul Islam, Chair of the Department of Civil Engineering rendered his kind consent to academically supervise the internship program.
Design of multi storey sleeve car parking with stadd pro.vivatechijri
This review paper involves the study of various aspects of analysis and design of multi storey car parking by
using STAAD. Pro. Structural designing requires a detailed structural analysis on which the design of the structure is
based. But it is not always possible to do in manual calculation hence the need for programming tools was found. For
which several of power tools were formed, among which the most widely used one is STAAD. Pro, which allows the
structural and seismic analysis prior to its construction. For high rise buildings its quite feasible to use STAAD. Pro
for computing the loads and its combination and analysing the structure and designing the structure based on the
analysis.
* A dynamic, versatile and results-oriented Civil Structural Engineer with over 8+ years of outstanding experience including experience in GCC in spearheading initiatives in the Conceptual design, structural analysis, Detailed Engineering, constructability studies and supervision for several types of (Concrete & Steel) structures as EPC, Feed projects in oil & gas and as well as complex Mixed-use buildings in construction area. Seeking a challenging position in Civil Structural Engineering (CSE) Multi-large Engineering Project within a professional firm to contribute accrued skills in formulating organizational objectives and charting a mutually beneficial growth path.
* Hard working and focused, honest and reliable, good effective interpersonal communication skills to work in a multi‐cultural environment, good team management skills
* Have the ability to adopt any new technologies, product or skills in relatively short time through employment & self‐study, ability to Accept and Learn From Criticism
Dear Sir
I have worked in projects of Qatar rail, Dubai parks, Delhi metro in design of metro stations, Viaducts, Steel Structures, Buildings etc.
I have worked in design engineering, form consultant's end as well as contractors end and have been exposed to variety of aspects related to Structural Engineering.
It would be a great learning experience for me to work your organization and hence sharpen my technical skills further.
Presently I am in Qatar and have worked in Qatar,UAE and India .
Book for Beginners, RCC Design by ETABSYousuf Dinar
Advancement of softwares is main cause behind comparatively quick and simple
design while avoiding complexity and time consuming manual procedure. However
mistake or mislead could be happened during designing the structures because of not
knowing the proper procedure depending on the situation. Design book based on
manual or hand design is sometimes time consuming and could not be good aids with
softwares as several steps are shorten during finite element modeling. This book may
work as a general learning hand book which bridges the software and the manual
design properly. The writers of this book used linear static analysis under BNBC and
ACI code to generate a six story residential building which could withstand wind load
of 210 kmph and seismic event of that region. The building is assumed to be designed
in Dhaka, Bangladesh under RAJUK rules to get legality of that concern organization.
For easy and explained understanding the book chapters are oriented in 2 parts. Part A
is concern about modeling and analysis which completed in only one chapter. Part B
is organized with 8 chapters. From chapter 1 to 7 the writers designed the model
building and explained with references how to consider during design so that
creativity of readers could not be threated. Chapter 8 is dedicated for estimation. As a
whole the book will help the readers to experience a building construction related all
facts and how to progress in design. Although the volume I is limited to linear static
analysis, upcoming volume will eventually consider dynamic facts to perform
dynamic analysis. Implemented equations are organized in the appendix section for
easy memorizing.
BNBC and other codes are improving and expending day by day, by covering new
and improved information as civil engineering is a vast field to continue the research.
Before designing something or taking decision judge the contemporary codes and
choose data, equations, factors and coefficient from the updated one.
Book for Beginners series is basic learning book of YDAS outlines. Here only
rectangular grid system modeling and a particular model is shown. Round shape grid
is avoided to keep the study simple. No advanced analysis is described and it is kept
simple for beginners. Only two way slab is elaborated with direct design method,
avoiding other procedures. In case of beam, only flexural and shear designs are made.
T- Beam, L- Beam or other shapes are not shown as rectangular beam was enough for
this study. Bi-axial column and foundation design is not shown. During column and
foundation design only pure axial load is considered. Use of interaction diagram is not
shown in manual design. Load centered isolated and combined footing designs are
shown, avoiding eccentric loading conditions. Pile and pile cap design, Mat
foundation design, strap footing design and sand pile concept are not included in this
Analysis and Design of Structural Components of a Ten Storied RCC Residential...Shariful Haque Robin
This report has been prepared as an integral part of the internship program for the Bachelor of Science in Civil Engineering (BSCE) under the Department of Civil Engineering in IUBAT−International University of Business Agriculture and Technology. The Dynamic Design and Development (DDD) Ltd. nominated as the organization for the practicum while honorable Prof. Dr. Md. Monirul Islam, Chair of the Department of Civil Engineering rendered his kind consent to academically supervise the internship program.
Design of multi storey sleeve car parking with stadd pro.vivatechijri
This review paper involves the study of various aspects of analysis and design of multi storey car parking by
using STAAD. Pro. Structural designing requires a detailed structural analysis on which the design of the structure is
based. But it is not always possible to do in manual calculation hence the need for programming tools was found. For
which several of power tools were formed, among which the most widely used one is STAAD. Pro, which allows the
structural and seismic analysis prior to its construction. For high rise buildings its quite feasible to use STAAD. Pro
for computing the loads and its combination and analysing the structure and designing the structure based on the
analysis.
* A dynamic, versatile and results-oriented Civil Structural Engineer with over 8+ years of outstanding experience including experience in GCC in spearheading initiatives in the Conceptual design, structural analysis, Detailed Engineering, constructability studies and supervision for several types of (Concrete & Steel) structures as EPC, Feed projects in oil & gas and as well as complex Mixed-use buildings in construction area. Seeking a challenging position in Civil Structural Engineering (CSE) Multi-large Engineering Project within a professional firm to contribute accrued skills in formulating organizational objectives and charting a mutually beneficial growth path.
* Hard working and focused, honest and reliable, good effective interpersonal communication skills to work in a multi‐cultural environment, good team management skills
* Have the ability to adopt any new technologies, product or skills in relatively short time through employment & self‐study, ability to Accept and Learn From Criticism
I have 8+ years of experience in Oil, Gas and Petrochemical Plant projects as Civil /Structural Design Engineer.
I have experience of working in Middle East – Kuwait and Oman.
I have worked for basic design, FEED, detailed engineering and construction support phases of the projects which has given me an experience in executing the project from its very beginning.
Involved in the execution of large green field projects and brown field jobs.
I have performed design for most of the oil and gas structures like pipe racks, equipment structures, technological structures, platforms, pipe supports, vessel supporting structures using STAAD.Pro and various Civil foundations using Mat 3D.
Proficient in Civil Engineering application software’s like STAAD.Pro, Mat 3D, AutoCAD and General Engineering Software.
Experience in international codes for structural design. (BS, AISC,API and IS)
1. 1
Rakesh Kumar S
Structural Engineer (Pursuing Istructe Chartership)
Graduate member no 078392445
Mobile : +91 973 900 8236
E-Mail : truenotesrakesh@gmail.com
ORGANISATION
Parsons Brinckerhoff
QUALIFICATIONS
Bachelor of Engineering-
Civil Engineering
Master of Engineering-
Structural Engineering
PROFESSIONAL AFFILIATIONS
Member-American Society
of Civil Engineers
Member-National Institute
Centre for Earthquake
Engineering-IIT Kanpur
SPECIALISATIONS
Structural Analysis, Design
& Documentation
Co-ordination with CAD
Draftsmen
Liaison with Proof Checkers/
GC/ IE/ Client in the
approval process
SOFTWARE SKILLS
STAAD Pro V8i
MIDAS Civil
AutoCAD
MS Office
Summary of Experience
Rakesh is a Structural Engineer who has developed broad
knowledge and skills in the design of buildings, bridges and
Metro Rail Structures. He has over 6 years of engineering
experience. His key areas of expertise are in general civil
designs and structural designs.
Key Strengths and Experience
Detailed designs of Viaduct Structures (for Metro Rail)
Detailed design of Metro Rail Station Structures
Detailed design of General RC Buildings
Seismic design and detailing for Buildings
Top Down Construction Methodology
Employment History
Aug 2012 till date - Design Engineer
Parsons Brinckerhoff India Pvt. Ltd.
Sep 2010 - Jul 2012 - Assistant Engineer
SNC Lavalin Infrastructures Pvt. Ltd.
Feb 2010- Jun 2010 – Consultant
Civil Aid Techno clinic Pvt Ltd. (now BUREAU VERITAS)
Aug 2006-Aug 2007 - Building Design Engineer
Design Cell Pvt. Ltd.
2. 2
Relevant Experience
1. Corridor 1 of Hyderabad Metro Rail Project, Detailed Design of Viaduct Structures,
Hyderabad (2012-2013)
Involved in the Detailed Design project for Hyderabad Metro’s (HMRL) elevated structures.
Performed structural modelling, analysis and detail design of precast segmental post
tensioned box girder viaducts of different spans. Also worked on modelling, analysis and
design of 4 cast in-situ post-tensioned box girder viaducts for obligatory spans.
Worked on elongation calculations for various curved spans and carried out bearing designs
of various viaduct structures of various spans.
Using STAAD Pro/ MIDAS tools & worksheet calculations have designed these viaducts and
have worked for producing the general arrangement, numeration & reinforcement drawings
for the same.
Co-ordinated with the CAD team for the detailed drawings and submit the same to the client
to obtain approvals.
2. Chennai Metro Underground Stations, Detailed Designs, Chennai (2012-ongoing)
Involved in the Detailed Design project for Chennai Metro underground stations under UAA-
02 and 03 packages for Chennai Metro Rail Corporation (CMRL).
Responsible for preliminary and detailed design of various structural components of 7
Underground Metro Station’s entrance/ exit structures using Top down and Bottom up
Construction methodology.
Also worked on the modelling, analysis and detail design of concourse level slab and internal
elements of main station structures.
Few challenges faced in the project were in the preparation of General arrangement
drawing of entrance and exit structures, to provide sequence of construction and to analyse
& design accordingly.
Provision of Waler beam, its arrangement and design is a crucial part in the Top down
construction methodology. Flotation check for the hull structure, design of base slab for uplift
pressure, design of Steel Plunge-in columns, design of Barrette piles for tension &
compression, capping beam design for diaphragm wall for horizontal loads and U trough
designs are the other challenges faced.
Worked on the revisions to be made in detailed designs due to site requirements/constraints
viz., post drilled re-bars in D-walls due to mis-positioning of bars during construction, to
check for redistribution of moments at locations where couplers are out of position.
Using STAAD programs & worksheet calculations designed the slabs and other structural
components and produced general arrangement, numeration & reinforcement drawings for
the same.
Co-ordinate with CAD, MEP and Architectural team for drawings for the designs done.
Submission of design documentation together with drawings to the client, LDC and GC and
obtain approvals for the designs.
3. 3
3. Bangalore Metro Rail Project (BMRCL), Detailed Design of Elevated Stations & Bridge
Structures, Bangalore (2010-2012)
Involved in the Detailed Design project for Bangalore Metro rail project’s Phase 1- Reach 2
and 3.
Responsible for the detailed design of 6 station entrance/ exit building structures and 5 Main
Station Bridge Structures which involved preparation of general arrangement drawings,
modelling, structural analysis, design and detailed drawings.
Challenges involved in the project were in the preparation of GA with co-ordinating the
architectural drawings which were revised as per the site constraints and requirements,
arrangement of structural system to best suit the requirement with economy, design of
piles, pile caps, piles, girders, pre-tensioned beams, corbels, ledge beams, piers, retaining
walls, stair cases, lift supports, RC walls; after analysis for live load, moving load and other
loads specified under DBR of the project.
Live load analysis combined with earthquake and other loads were crucial aspects in the
design of Bridge structures that housed main station with exit and entrance structures under
the same frame model of the structure.
Worked on design of steel roof structures for two stations which are architecturally
magnificent structures.
Using STAAD programs & worksheet calculations designed all the structural components and
produced general arrangement, numeration & reinforcement drawings for the same.
Co-ordinate with CAD, MEP and Architectural team for drawings for the designs done.
Submission of design documentation to client for approvals.
Actively co-ordinated with the General Consultant of BMRCL whilst obtaining approvals for
the designs.
4. Proof Checking of Designs (2010)
Performed analysis and design check of the newly constructed industrial buildings. The
entire building was rechecked to satisfy serviceability and durability requirements. Analysis
and design check was performed based on site erected member specifications & site
conditions. Suggestions on further strengthening measures required were reported to the
Client.
5. RC Building Designs, various (2006-2007)
Design of Multi-storey Apartments & other residential buildings
Design of Commercial & School buildings
Sump designs
Wastewater treatment plant
4. 4
6. Continuing Professional Development
Took part in the ENGINUITY competition which gives users the opportunity to gain a better
understanding of how a modern GLOBAL construction business operates, challenging them
with the task of managing a UK-based construction company operating worldwide.
Actively participated in national and international technical seminars viz. Structural Engineers
World Congress (SEWC) 2007, REDECON 2006.
Actively participated in the workshop conducted by RICS on understanding the BIM concept.
I have huge interest to involve in the projects with BIM.
Undergone a Certificate Proficiency course at Indian Institute of Science, Bangalore on the
Topic “Finite Element Method”.
Attended 2 day training session on the applications of midas software in the design of
viaducts organised by Parsons Brinkerhoff.
Actively participated in the seminar conducted by ICE, Bangalore chapter on the topic
‘Bridges and innovations’.
Actively participated in the site visits organised by Parsons Brinkerhoff and understood the
application of post tensioning to cables at site.
Personal Information
Date of Birth : 23-07-1984
Marital Status : Married
Address : #1 second floor 4rth ‘A’ main road C cross Kalyan Nagar
Bangalore – 560072, India.
Nationality : Indian
Languages known : English, Hindi, Kannada