Raghavendra Sagar's resume summarizes his education and work experience in the telecommunications field. He has a B.Tech in Electronics and Communication Engineering from VSIT College JNTU from 2014. He currently works as an Engineer for Huawei Telecommunications, where his responsibilities include 3G and 2G radio access network planning and optimization. His technical skills include performing drive tests, diagnosing RF problems, and optimizing networks through parameter changes and antenna adjustments.

1. [Type text] Page 1
RESUME
RAGHAVENDRA SAGAR
Correspondance Address :
H No : 1-9-322/21A,
Sri Sai Venkata Enclave,
Kushaiguda, Hyderabad – 500062.
Cell: +9533134935
E-mail : kyasaniraghavendrasagar@gmail.com
Objective:
To pursue a challenging career and be a part of a progressive organization that gives scope
to apply my knowledge and skills and to be a part of team that dynamically works towards the
growth of the organization.
Education Qualification:
B.Tech : Electronics and communication Engineering (ECE) from VSIT College JNTU in
2014.
Intermediate : M.P.C from Sri Chaitanya Jr. College, Board of Intermediate Education in 2010.
S.S.C : From Sri Chakri Vidya Niketan Kushaiguda, Board of Secondary Education 2008.
Project Details:-
TITLE: ZIGBEE CONTROLLED SMART ROBOT.
 The System design here can detect the abstract using IR Sensors.
 The applications and advantages of Remote Control Robots are plenty and especially in specific
areas where people cannot go there to perform specific Task.
 With little changes this obstacle sensing circuits can be replaced with a metal detector for detecting
the metal mines placed under the earth.
 The main advantage is that the Robot can be controlled from the safe Zone through wireless video
analyzing system.
 This kind of system can be used at hazardous places where people cannot go directly.
Experience
 Company: Huawei Telecommunications Pvt. Ltd. (Till Now),
 Vendor: Nutek
 Designation : Engineer
 Operator: Aircel.
 Circle: Andhra Pradesh.

2. [Type text] Page 2
Job Responsibilities
1) 3G (UMTS) Radio Access Network Planning and Optimization
 Conduct acceptance drive test on newly-on-air Node Bs, make certain that coverage and best
performance are met (video call, voice call and packet services UL and DL), proper Inter Systems
Handovers are executed.
 Regularly endorse critical alarms to Operations and Maintenance group for proper handling/
troubleshooting.
 Checks/resolves3GparameterdiscrepanciesforNode Bs and Adjacencies (3G to 3G, 3G to 2G and 2G to
3G) especially after every network activities like BTS/BSC rooming, LAC modifications.
 Analysisof drive testdatato identifyandtroubleshootmissingneighbors,coverage holes,pilotpollution
areas, areas of no dominance, code plan problems, overshooting sites, parameter inconsistency etc
 Optimization using parameters and implementing various steps to achieve the KPI’s.
 RF Coverage optimization using antenna tilt and azimuth fine tuning for optimal coverage overlap and
reduction of pilot pollution by Ec/No and Ec/RSCP improvements
 Perform RF network tuning and enhance the soft and IRAT handover performance
 Perform all TRAI related activity like Monthly PMR Audit & Live PMR Audit
2) 2G (GSM) Radio Access Network Planning and Optimization:-
 Frequency BCCH & TCH planning, BSIC planning and MAIO planning.
 Alarms and network report analysis, Dump analysis.
 Optimizations and hardware fault rectifications based on BSC ALARMS.
 Timely audit on cell neighbors to improve handover performance.
 Optimization using parameters and implementing various steps to achieve the KPI’s.
 To check the coverage of radio cells & compare it with coverage prediction.
 Responsible for physical optimization like planned azimuths, swapping, tilts, planned heights.
 Verifythe drive testparameterse.g.Rx level inidle mode ,RXlevel indedicatedmode,RXQuality,cellid,
Handovers, C/A,C/I,BCCH,BSIC etc. defined by the operator.
 Verifythe drive testparameterse.g.Rx level inidle mode ,RXlevel indedicatedmode,RXQuality,cellid,
Handovers, C/A,C/I,BCCH,BSIC etc. defined by the operator.
 Maintaining Handover & Other parameters for meeting KPI’s.
 Neighbor Analysis and Planning.

3. [Type text] Page 3
Technical skills
 Perform Drive Test and making report for GSM , WCDMA .
 Cluster Drive, SCFT, Scanner Drive, Cluster Optimization, Customer Complaints.
 Diagnose RF related problems such as call failures, HO failures, bad quality, poor coverage,
hardware faults, missing neighbors.
 Solving coverage problems by giving required tilts, providing parameter level changes.
 Making & Comparing Power Point Presentations of Pre & Post Optimization- CPICH RSCP, CPICH
Ec/lo, Scrambling Code (SC).
 Measurement of physical parameter like Latitude, Longitude, Azimuth, Tilt, Height of Antenna.
 Perform Surveys for new site integration.
 Co-ordination with customer and other field engineer
 Perform customer complaints and field optimization.
 Adaptability and ability to work under pressure
Hobbies:
 Playing Badminton
 Playing Chess
 Watching discovery channel
Personal Vitae:
 Name : K.Raghavendra Sagar
 Father’s Name : K.Anjaneya Sagar
 Date of Birth : 04TH NOV 1991
 Gender : Male
 Nationality : Indian
 Marital Status : Single
Declaration:
I hereby declare that the above information provided by me is correct to my knowledge.
Date : (K.RAGHAVENDRA SAGAR)
Place : Hyderabad.