Victorianus Cahya Prakasa provides his curriculum vitae. He has over 15 years of experience in quality management, quality control, and project management for oil and gas companies. He held positions as a QA/QC Engineer, Pump Engineer, and Maintenance Supervisor. He has led quality audits and inspections, overseen pump testing and maintenance, and managed projects for companies such as Technip, KSB Indonesia, and Pertamina EP. He has extensive training in quality systems, welding inspection, safety, and pump design standards.
CAREER SUMMARY
Almost 10 years experience As NDT Technician, QA/QC Engineer or Inspector and Supervisor Construction (Welding, Piping, Structure, and Mechanical) in Yard Fabriacation and Site Erection, Installation Petrochemical, Geothermal, Oil and Gas Project. Well familiar in the preparation of Test Package (Leak Test of Hydro and Pneumatic Test), Reinstatement, Punch list untill commissioning, Inspection of Positve Material Identification (PMI), Witness Preheat and Post Weld Heat Treatment, Maintanance of Interpass temperatur, Technical Reports, Testing Procedures, Documentation and Project Hand-over. Capable of Co-ordination, Supervision, Motivating personnel and doing physical work and other duties the Company may require.
My background education is Bachelor Degree of Naval Architecture Engineering with holder Welding Inspector (B4T Bandung, Indonesia), International Welding Inspection Personnel (IWIP) and ASNT Level II of Radiongraphy Interpreter, Ultrasonic Test, Magnetic Test and Penetrant Test. Beside that, familiar with various national & International codes such as : ASME – B31.1, B31.3 Sec. IX, Sec. VIII, Sec. V, Sec II, API-1104, AWS D1.1 etc.
Mobile no : +628119636999 / +6282310263999
International Passport No : A9582648
Email : ahmad_anbika@yahoo.com
CAREER SUMMARY
Almost 10 years experience As NDT Technician, QA/QC Engineer or Inspector and Supervisor Construction (Welding, Piping, Structure, and Mechanical) in Yard Fabriacation and Site Erection, Installation Petrochemical, Geothermal, Oil and Gas Project. Well familiar in the preparation of Test Package (Leak Test of Hydro and Pneumatic Test), Reinstatement, Punch list untill commissioning, Inspection of Positve Material Identification (PMI), Witness Preheat and Post Weld Heat Treatment, Maintanance of Interpass temperatur, Technical Reports, Testing Procedures, Documentation and Project Hand-over. Capable of Co-ordination, Supervision, Motivating personnel and doing physical work and other duties the Company may require.
My background education is Bachelor Degree of Naval Architecture Engineering with holder Welding Inspector (B4T Bandung, Indonesia), International Welding Inspection Personnel (IWIP) and ASNT Level II of Radiongraphy Interpreter, Ultrasonic Test, Magnetic Test and Penetrant Test. Beside that, familiar with various national & International codes such as : ASME – B31.1, B31.3 Sec. IX, Sec. VIII, Sec. V, Sec II, API-1104, AWS D1.1 etc.
Mobile no : +628119636999 / +6282310263999
International Passport No : A9582648
Email : ahmad_anbika@yahoo.com
Process Design Engineer with 8.0 Years of experience in Oil & Gas and Refinery.ASHISH KUMAR
Involved in Detail and Basic engineering projects in Oil & Gas and Refinery. I have exposure to softwares like HTRI, HYSYS. Experience in Line and Control valve hydraulics, Pump hydraulics. Vendor offer checking of equipments, instrumnets amd compressors. Worked in Oil and gas projects as well as refinery projects. Exposure to API/Shell/ Saudi Aramco standards.
Mechanical Engineer
- Design Mechanical Sub-Discipline Works
- Project Management
- Strong Mechanical Fundamental
- Construction
- Oil and Gas
- API, ASME,ASTM, ASTM,DIN,BS EN, ISO
Process Design Engineer with 8.0 Years of experience in Oil & Gas and Refinery.ASHISH KUMAR
Involved in Detail and Basic engineering projects in Oil & Gas and Refinery. I have exposure to softwares like HTRI, HYSYS. Experience in Line and Control valve hydraulics, Pump hydraulics. Vendor offer checking of equipments, instrumnets amd compressors. Worked in Oil and gas projects as well as refinery projects. Exposure to API/Shell/ Saudi Aramco standards.
Mechanical Engineer
- Design Mechanical Sub-Discipline Works
- Project Management
- Strong Mechanical Fundamental
- Construction
- Oil and Gas
- API, ASME,ASTM, ASTM,DIN,BS EN, ISO
Funciones que desempeñan los signos de comunicación no verbalCarac Consultores
En un intercambio comunicativo intervienen los dos sistemas de comunicación, verbal y no verbal, y entre ellos se establecen distintas relaciones. Todos los signos no verbales pueden cumplir una o más funciones.
Webtrackker is an IT company in Noida and also provides training in SAP(HANA, ABAP, SD, MM, PP, FI/CO, BI, BASIS), JAVA, PHP, ANGULAR JS, HADOOP for more details call at 8802820025, 9540693544 or visit at our website www.webtrackker.com
1. VICTORIANUS CAHYA PRAKASA, ST
CURRICULUM VITAE
A. PERSONAL DATA
Name : Victorianus Cahya Prakasa, ST
Age : 37 years
Date of Birth : Klaten, 03 March 1979
Address : Taman Alfa Indah Blok F 3 No. 23 Kel. Joglo Kec. Kembangan Kab. Jakarta
Barat – Indonesia – 11640
Mobile 1 : +62-813-818-53017
Mobile 2 : +62-815-878-3562
Sex : Male
Nationality : Indonesian
Marital Status : Married
No of Child : 1 (One)
Email : victorianus_cp@yahoo.com or victorianus0303@gmail.com
Availability : Soon
A. EDUCATION
Mechanical Engineering, Universitas Gadjah Mada – Yogyakarta, graduated in 2005
B. KEY QUALIFICATION
I have join several training related to Quality Management System, ASME QC System, Internal
Quality Auditor, Quality Control Circle (QCC), and Quality Control Process that held by several
institutions such as : Bereau Veritas (BV), SAI Global, INDAG and PT. Sucofindo Prima
International Consultant (SPRINT CONSULTANT), P2M Departmen Teknik Mesin Universitas
Indonesia, BPPT Serpong, Pump Manufacture KSB Germany, and Inhouse Trainings Technip
Referring to the trainings, I improve my capability on:
1. Develop and Improve Quality Management System
2. Set up and improve Quality Control Process
2. VICTORIANUS CAHYA PRAKASA, ST
3. Perform Internal Quality Audit as an Auditor
4. Organize improvement activity related to Quality and Productivity
5. Problem solving and good analytical thinking
6. Handling Claim Customer to determine Root Cause, Corrective and Preventive Action
C. TRAINING
IRCA Lead Auditor ISO 9001:2015, held by Bereau Veritas (BV) Indonesia, 2016
RABQSA-AU- Internal Auditor Management Systems Auditing, held by SAI Global, 2016
Welding Inspector (WI) and ASME Quality Control System, held by P2M Universitas
Indonesia, 2013
Dasar-dasar Keselamatan dan Kesehatan Kerja, held by Departemen Tenaga Kerja
Republik Indonesia & P2M Universitas Indonesia, 2013
Technip PULSE, held by PT. Technip Indonesia, 2013
Technip Ethic Training, held by PT. Technip Indonesia, 2012
Internal Auditor Vendor Quality Management System, by PT. Inti Karya Persada Tehnik,
2011
Member of National Fire Protection Association (NFPA), held by NFPA, 2010
KSB Easy Select and Sewage, held by KSB Frankenthal Germany, 2009
Callibration of Flowmeter, held by BTMP-BPPT and Metrologi Jasa Prima, 2009
KSB Pump Design, Order Processing and Operation Management, held by KSB
Pakistan, 2009
SAP Program, held by PT. KSB Indonesia, 2009
English Course, held by ELTI Yogyakarta, 2006
Quality Management System ISO 9001 : 2000, held by INDAG and PT. Sucofindo Prima
International Consultant (SPRINT CONSULTANT), 2002
Seminar Industrial, held by Fakultas Teknik Universitas Gadjah Mada, 1999
AutoCad 2000, held by Mechanical Engineering Computer Club (MECC) of Teknik Mesin
Universitas Gadjah Mada, 1998
D. COMPUTER LITERATE
SAP
AutoCAD R14/2000
MS Office
Adobe Acrobat Professional
3. VICTORIANUS CAHYA PRAKASA, ST
E. International & Non International Standard
• ASME Section 1 - 8 Boiler and Pressure Vessel Code
• AWS D1.1 Structural Welding Code - Steel
• API 610 Centrifugal Pump for Petroleum, Petrochemical and Natural
Gas Industry
• NFPA 20 Standard for The Installation of Stationary Pumps for Fire
Protection
• ISO 9001:2015 Quality Management System
• OHSAS 18001: 2007 Safety Management System
F. EMPLOYMENT RECORD
EMPLOYER : PT. Technip Indonesia (PTTI)
Business Line : Engineering, Procurement, & Construction for Oil & Gas Business
Period : Dec 2011 – July 2016
Position Held : QA/QC Engineer
Description of Duties :
• Maintain Quality Management System ISO 9001: 2008, is
implemented in Corporate and Project.
• Conduct Internal Audit for Corporate and Project.
• Prepare audit checklist for Corporate and Project
• Prepare audit report
• Liaison with Project Management for QA/QC related activities in
project
• Attend to Kick Of Meeting and Pre Inspection Meeting.
• Inspection at factory : material check, PMI, Fabrication, Factory
Acceptance Test, others tests.
• Inspection to site
• Reviewing document QC of vendor
• Reporting inspection.
EMPLOYER : PT. Inti Karya Persada Tehnik (IKPT)
Business Line : Engineering, Procurement, & Construction for Oil & Gas Business
Period : May 2011 – Dec 2011
Position Held : Procurement Executive and Vendor Quality Management
Description of Duties :
• Review Quality Management System ISO 9001: 2008 and Safety
Management System that implemented by Vendor
4. VICTORIANUS CAHYA PRAKASA, ST
• Conduct Vendor Qualification Management to Vendor
• Review Vendor Qualification Management report/ performance of
Vendor
• Procurement for material project start from : RFQ (Request For
Quotation) to vendors, get TBE (Technical Bid Evaluation) of
Engineer, prepare CBT ( Commercial Bid Evaluation), Negosiate
with Vendors, Pre award Vendor, prepare PO (Purchase Order)
to awarded vendor, arrange KOM (Kick Of Meeting) with vendor
and Client.
• Expediting Purchase Order in order on schedule : office
expediting and site expediting, prepare RN (Release Note) to
deliver equipment after pass test by QC, make sure material
arrived at site.
EMPLOYER : PT. KSB Indonesia (KSBI)
Business Line : Pump Manufacture for Oil & Gas Business
Period : Nov 2008 – Apr 2011
Position Held : Application Engineer and Pump Engineer
Description of Duties :
• As Application Engineer are prepare document Quotation of
Pump set to be offering to Tender/ Bidding to Client Mining, Oil
and Gas, and other
• Design Fire Pump set as per NFPA 20
• Design API, Non API Pump and ANSI Pump
• Operate program SAP
• Conduct Factory Acceptance Test and Site Acceptance Test of
Pump Set
• Prepare Test checklist for Corporate and Project
• Prepare Test report
EMPLOYER : PT. Pameterindo Edukatama Aneka (PAMDUTA)
Business Line : Procurement, & Construction for Water Business
Period : Apr 2007 – Oct 2008
Position Held : Purchasing and Technical Support Water Meter Technology
Description of Duties :
• Preparing document Tender for Project Water
• Perform purchase activities : quotation, buying materials, deliver
materials to site
5. VICTORIANUS CAHYA PRAKASA, ST
• Material acceptance from contractor to project at site
EMPLOYER : PT. Curug Lestari Maju
Business Line : Manufacturer of Wood Frame (exportir)
Period : Aug 2006 – Jan 2007
Position Held : Maintenance Supervisor
Description of Duties :
• Prepare schedule of Preventive Maintenance
• Organize and supervise team Maintenance
• Control Spare part for maintenance
• Prepare Reporting to Maintenance Manager
G. OTHER EXPERIENCES/ PROJECT
Year Project Employer
2007 - 2008
Supply Pipe and accessories Project ProAir at
Waingapu – Sumba Timur – NTT (Client :
Kimpraswil Sumba Timur)
PAMDUTA
2008 - 2011
Supply Fire Pump Project Orica Mining (Client :
PT. Rekayasa Industri)
KSBI
2008 - 2011
Supply Fire Pump Project UPMS Lampung
(Client : UPMS Pertamina)
KSBI
2011 - 2011
Project Pengembangan Gas Gundih (Client :
Pertamina EP)
IKPT
2011 - 2011
Project Pupuk Kaltim V (Client : PT. Pupuk
Kaltim)
IKPT
2011 - 2012
Project EPC Tie In Pad 28&29 and Pad 30&31
(Client : PT. Geodipa)
PTTI
2012 - 2014
Project Bukit Tua Development Project (Client :
Petronas Carigali)
PTTI
2014 - 2016
Project Pengembangan Gas Matindok (Client :
Pertamina EP)
PTTI
2015 - 2016
Project Jangkrik Complex Project 2 (Client : ENI
Muara Bakau BV)
PTTI
6. VICTORIANUS CAHYA PRAKASA, ST
• Material acceptance from contractor to project at site
EMPLOYER : PT. Curug Lestari Maju
Business Line : Manufacturer of Wood Frame (exportir)
Period : Aug 2006 – Jan 2007
Position Held : Maintenance Supervisor
Description of Duties :
• Prepare schedule of Preventive Maintenance
• Organize and supervise team Maintenance
• Control Spare part for maintenance
• Prepare Reporting to Maintenance Manager
G. OTHER EXPERIENCES/ PROJECT
Year Project Employer
2007 - 2008
Supply Pipe and accessories Project ProAir at
Waingapu – Sumba Timur – NTT (Client :
Kimpraswil Sumba Timur)
PAMDUTA
2008 - 2011
Supply Fire Pump Project Orica Mining (Client :
PT. Rekayasa Industri)
KSBI
2008 - 2011
Supply Fire Pump Project UPMS Lampung
(Client : UPMS Pertamina)
KSBI
2011 - 2011
Project Pengembangan Gas Gundih (Client :
Pertamina EP)
IKPT
2011 - 2011
Project Pupuk Kaltim V (Client : PT. Pupuk
Kaltim)
IKPT
2011 - 2012
Project EPC Tie In Pad 28&29 and Pad 30&31
(Client : PT. Geodipa)
PTTI
2012 - 2014
Project Bukit Tua Development Project (Client :
Petronas Carigali)
PTTI
2014 - 2016
Project Pengembangan Gas Matindok (Client :
Pertamina EP)
PTTI
2015 - 2016
Project Jangkrik Complex Project 2 (Client : ENI
Muara Bakau BV)
PTTI