Muhammad Nasir has over 10 years of experience in coating inspection and blasting/painting. He is currently a coating inspector at PT. McDermott Indonesia where he enforces coating specifications and procedures. Previously, he worked as a blasting/painting foreman and applicator at the same company. Nasir holds an SSPC Protective Coating Inspector Level 2 certification and has worked on projects for clients including Petronas, Chevron, and ConocoPhillips. He aims to utilize his training and experience in coatings inspection to ensure high quality work.

1. Rev.1, Date: 28/03/2014 Page 1 of 19 Muhammad Nasir
MUHAMMAD NASIR
Career Summary
Experience
1. Coating inspector (May 2013 – Present): PT. McDermott Indonesia
Duties & Responsibility :
 Enforcement and verification of work performed in accordance with specification,
manufacturer recommendations and coating procedure.
 Measure ambient conditions, surface temperature and air quality requiremants
 Inspect type of blasting equipment and tools to be used
 Inspect type and size of blasting media
 Inspect metal surface imperfections / defect
 Test indication of oil or water in compressed
 Test analysis of water-soluble ionic contamination ofblasting media air
 Inspect pre-cleaning, solven cleaning of surface, mechanical surface preparation
during pre-fabrication and onsite portable centrifugal blasting,open air blast
cleaning,vacuum blast cleaning, hand and power tool cleaning
 Measure compressad air pressure
 Inspect degree of cleanliness required
 Measure surface profile of blast cleaned surface
 Assess surface cleanliness of blast cleaned surface
 Inspect coating material storage conditions
 Monitor thinning, mixing,induction time and pot life
 Inspect type of coating application equipment,Thermal sprayed aluminium,
Insulation, Passive fire protection, Self leveling compounds, Anti-skid deck coatings,
Coated Hot dip Galvanizing and its acceptance.
 Monitor application method, type and pattern
 Measure wet film thickness by notch gages
 Non-destructive measurement of dry film thickness of non magnetic coating / non
conductive coatings applied to ferrous surface
 Monitor re-coating and final curing schedules
 Test discontinuity (holidays or pinholes) of coating and linings
 Inspection of defects on coated surface
 To stop non-conforming work and inform the production supervisor of required
corrective rework
 Documentation of the daily inspection activities and others as per the project
recuirement
.

2. Rev.1, Date: 28/03/2014 Page 2 of 19 Muhammad Nasir
Project Assigned & Involved
Project : Kepodang gas development
Client : Petronas
Project : Vetco grey
Client : Chevron
Project : Inpex
Client :
2. Blasting / Painting Foreman (Sept 2005 – May 2013): PT. McDermott Indonesia
- Batam Island, Indonesia.
Duties & Responsibility
 Foreman
 Foreman (all Pain system)
 Check and record Material Take Number (Material Treacebility Number)
 Visual Inspection after Blasting & Painting
Project Assigned & Involved :
 Project : Woodside
 Client : Foste wheeler LNG –V Expansion
 Project : Sutu Vang
 Client : Cuulong
 Project : Maersk
 Client : Peregrino Fpso Topside
 Project : KTT Module Platform, Jacket and flare Boom
 Client : Esso
 Project : Gorgon
 Client : Chevron
3. Blasting/Painting Applicator (November 2002 – October 2004): PT.
McDermott Indonesia - Batam Island, Indonesia.
Duties & Responsibility :
 Applicator Blasting
 Painter (all Paint system)
 Check and record Material Take Number ( Material Treacebility Number )
 Visual Inspection after Blasting
Project Assigned & Involved :
 Project : Belanak Wellheads Central Processing Platform Project
 Client : Conoco Philips
 Project : FPSO Belanak Natuna
 Client : Conoco Philips

3. Rev.1, Date: 28/03/2014 Page 3 of 19 Muhammad Nasir
Education
Senior High Scool
On Job Training and Courses
 SSPC PCI Protective Coating Inspector Level 2 ID #25934 (expires 12/31/2016).
 In house Training for Implementasion and Inspecsion of Blasting and painting by
NACE Certified Inspector # 6858 Mr Mujianto Ali
 Thermal Spraying Aplicator By CHT Internasional Pte Ptd
 Basic Painting & Blasting Certificate no CC18-057
 PTW & CSE By Industrialindo Konsultrain Services Certivicate no.PTW 13774/IKS/08
 Quality Awareness Level I
 Scafolding Awareness Training
 Fist Aid & CPR Training
Firms
September 2005 – Present PT. McDermott Indonesia
November 2002 – Oct 2004 PT. McDermott Indonesia
Personal Details
Name : Muhammad Nasir
Nationality : Indonesia
Place, Date of Birth : Bangkalan 08 Januari 1973
Gender : Male
Address : Taman laguna indah Blok B3/ 32 Tanjung Riau
Sekupang Batam
Phone Number : 082126758703 (mobile phone)
E-mail : MNasir@mcdermott.com
Nasirmoh73@gmail.com
Civil Status : Maried
Emp. No : 3083B / 102280

4. Rev.1, Date: 28/03/2014 Page 4 of 19 Muhammad Nasir

5. Rev.1, Date: 28/03/2014 Page 5 of 19 Muhammad Nasir

6. Rev.1, Date: 28/03/2014 Page 6 of 19 Muhammad Nasir

7. Rev.1, Date: 28/03/2014 Page 7 of 19 Muhammad Nasir

8. Rev.1, Date: 28/03/2014 Page 8 of 19 Muhammad Nasir

9. Rev.1, Date: 28/03/2014 Page 9 of 19 Muhammad Nasir

10. Rev.1, Date: 28/03/2014 Page 10 of 19 Muhammad Nasir

11. Rev.1, Date: 28/03/2014 Page 11 of 19 Muhammad Nasir

12. Rev.1, Date: 28/03/2014 Page 12 of 19 Muhammad Nasir

13. Rev.1, Date: 28/03/2014 Page 13 of 19 Muhammad Nasir

14. Rev.1, Date: 28/03/2014 Page 14 of 19 Muhammad Nasir

15. Rev.1, Date: 28/03/2014 Page 15 of 19 Muhammad Nasir

16. Rev.1, Date: 28/03/2014 Page 16 of 19 Muhammad Nasir

17. Rev.1, Date: 28/03/2014 Page 17 of 19 Muhammad Nasir

18. Rev.1, Date: 28/03/2014 Page 18 of 19 Muhammad Nasir

19. Rev.1, Date: 28/03/2014 Page 19 of 19 Muhammad Nasir