Anildo Eliasse Chimbane is a Mozambican national working as an O&M Technician for Anadarko Mozambique Area One. He has over 10 years of experience in oil and gas process control and operations. His education includes a degree in process control and ongoing studies in plant engineering. He is proficient in both English and Portuguese and has extensive training in safety, technical systems, and equipment operation.

1. Personal Data:
Name: Anildo Eliasse Chimbane
Surname: Manuel
Date of Birth: 05th May, 1985
Place of Birth: Macovane – Inhassoro, Mozambique
Residence: Inhassoro, Moazambique
Marital Status: Single
Nationality: Mozambican
Permanent
Residence:
Inhassoro, Mozambique
Contacts: +258 844804936 and +258 826978825
Email: Anildo.manuel@anadarko.com
Anildo.manuel@gmail.com
Education:
 Grade 12 at Mucoque Secondary School, Vilankulo, Mozambique (2007)
 Degree in Process Controller NQF Level 2--training attended at Skill Tec SASOL in
Sasolburg, South Africa (2011)
Other courses:
 English course-Institute of Language (2011)
 Proactive Driving Course (2011)
 Studied ESL with Anadarko Petroleum Corporation(2013)
 Gas Dehydration and Triethylene Glycol Regeneration course At Gly-Tech(2014)
 Basic Electrical system Electronic system at Shell(2014)
Curriculum Vitae

2.  Production Process I and II at Shell(2014)
 LNG Facility operations and Maintenance at PetroSkill(2014)
 LNG Plant Operator Training at GTI (Gas Technology Institute) in 2015
 I am currently attending Advanced Diploma of Plant Engineering At Engineering
Institute of Technology (EIT)
Awareness Training:
 ISO 9001- Quality Awareness
 ISO 14001- Environmental Awareness
 OSHAS 18001- Occupational Health and Safety Awareness System
 Fire Fighting course
 Emergency Standby
 Permit-to-Work System
 Authorized Gas Tester
 Risk Assessment
 Hazards Identification
Computer Skills:
Windows awareness, Microsoft Word, Power Point and Excel--have essential knowledge as a
user.
Driving licenses:
Competent to drive:
 Heavy vehicles (Type G)
 Forklift operation training
Languages:
 English
 Portuguese
Work Experience:
January, 2011 to April, 2013: Natural Gas Processing Plant--Process Controller Grade II-Sasol
Petroleum Temane, Mozambique
February, 2014 to November, 2014: Oil and Gas Deepwater Processing Platform in Gulf of
Mexico as Trainee at Anadarko Petroleum Corporation

3. 2015, I worked at Cryogenic Plant at Brasada Plant in Texas (Anadarko Petroleum Corporation).
I have experience with the following systems:
 HP and LP Fuel Gas System
 Natural Gas Dehydration Plant (Contactor: TEG regeneration system—ESCHER and
Static Mixer)
 Hydrocarbon Dew Point Control--Propane Refrigeration system(GRENCO)
 HP Gas Turbine Compressor System (MAN TURBO)
 Utility and Instrument Air System (ATLASCOPO)
 Nitrogen System
 Utility and Fire Water System
 Industrial Effluent Plant (HOUDEN)
 Sewage Plant (HOUDEN)
 Waste Incinerator (HOUDEN)
 Gas Turbine Generator (SOLAR)
 Inlet Separation (two phase and three phase separation)
 Gas Production Wells
 Molecular Sieves Operations
 Amine H2S and CO2 removal
 Condensate Stabilization
 Fractionator (C3 and C4+ separation)
 Demethanizer Tower
 I am currently working for Anadarko Mozambique Area One as an O&M Technician
Equipment Experience:
The following pieces of equipment are part of the above systems:
 High pressure gas turbine compressor
 Gas turbine generator
 Furnace, heaters and reboiler
 Shell and heat exchanger
 Air cooler heater exchanger
 Plate type heat exchanger
 Expander and JT valve operation
 Y grade compressor
 Stabilizer tower
 Vessels
 Storage tanks
 Grenco compressor

4.  Pumps
 Dryers
 Contactor column
 Air compressor
 Absorber column
 Static Mixer Dehydration
Basic responsibilities:
 Interpret lab results and to do process conditions modifications
 Routine inspections; monitor process parameters (temperature, pressure, flow and level)
 Monitor the performance of static and rotating equipment and make adjustments to all
equipment according to procedures
 Report unusual observations and make process adjustments
 Problem solving
 Receive instruction from DCS panel operator to perform specific tasks
 Shut down equipment/systems
 Prepare equipment/system for maintenance under permit-to-work system/isolation
standard
 Startup equipment/systems
 Respond to emergency/hazardous conditions
 Support of company safety, environment and quality policies and programs
 Perform hand-over activity at the end of the week to ensure that my relief worker is
aware of any condition that requires special attention in order to maintain safe and
efficient production
Abilities:
 Leadership, team-working spirit and skill for knowledge transfer
 Good spirit of learning and listen
 Good trouble-shooting skills
 Responsible
 Creative