This 3-page curriculum vitae provides information about AlaaEl Din Hassan Mohammed Mustafa, an Egyptian Instrument & Automatic Control Engineer with over 18 years of experience. It includes details about his education and qualifications, including a B.Sc. in electronic & communication from Alexandria University. It also outlines his extensive work history on instrumentation projects for natural gas, petroleum refining, and other facilities in Yemen, Qatar, and Egypt. His responsibilities and skills include engineering, construction supervision, commissioning, and maintenance of instrumentation and control systems.

1. Name:AlaaEl Din Hassan Mohammed Mustafa
Date:Aug, 2014
Page 1 of 9
Curriculum Vitae
Alaaeldin M. Mostafa
I’manInstrument Engineerwithmorethan18yearsof serviceexperience.I’veperfectedmyskillsthrough
many problems & troubleshooting I encountered during my extensive working experience at the
following:-
A. Instrumentations systems (Construction, commissioning, startup, maintenance, planning and
engineering) of onshore oil and gas production facilities:
 Natural Gas fields at Yemen (SAFER & YLNG).
 GTL ORYX at Ras Laffan Qatar
 CDR Project at QAFAC Qatar.
B. Instrumentations systems (Construction, commissioning, startup, maintenance, planning and
engineering) of Petroleum Refinery plant.
 Alexandria Petroleum Co.
 Alexandria National Co. for Petrochemicals and condensates
I enjoyworkingwithpeople andcomputers,andwork well underpressure.Ialwayshave the abilityand
willingnesstolearnnewinInstrumentation,automationsystemandControl systemsthatsupportNatural
Gas Processing, Oil Processing, Petroleum Refining, Platform Production and HSE.
Personal Data
Mailing Address : 12 Ali Bin AbiTalebStr, Elmohagreen, Elawayed,El Montaza,
Alexandria,Egypt.
Mobile : 002 011 50121204
Email :alaaeldin_hmm@yahoo.com
Name Alaaeldin Hassan Mohammed Mustafa
Profession Instrument& Automatic Control Engineer
Nationality Egyptian
Place Of Birth Alexandria
Data Of Birth 5/7/1972
Age 42 Years
Height / Weight 178 Cm / 80 Kg
Religion Moslem
Military Status Done
Marital Status Married

2. Name:AlaaEl Din Hassan Mohammed Mustafa
Date:Aug, 2014
Page 2 of 9
Education
Computer and Language Skills
 Very good computer skills of hardware & software, Internet applications and Networking.
 Computer literate - proficient with office productivity software (i.e., Word, Excel, Access, PowerPoint)
 Good written, oral and speaking English language skills, (I have passed an upper intermediate course
in English at the American centre with grade A+).
Carrier Skills
 Demonstrate a familiarity with related documentation, drawings and systems:
 Safety Integrity Level (SIL) analysis
 Electronic and pneumatic instrumentation (transmitters, Valves etc.)
 DCS / PLC systems
 Safety and shutdown systems
 Fire and gas systems
 HMI and system configuration
 Control room layout
 Control panels
 Marshalling racks and junction boxes
 Area Classifications
 System staging and checkout
 Instrumentation calibration
 Loop check and commissioning
 Troubleshooting
 Hot cutover or startup
 Instrument datasheets, Instrument index, Instrument loop diagrams, Instrument installation,
details,Planandlayout drawings,Logicdiagrams,Control schematics, Cause & Effect diagrams.
 Industry codes, guides, and standards
 E&I Quality Control Engineer with good knowledge of QC procedures.
 Good knowledge of Construction, Commissioning and loop testing procedure.
Membership Egyptian syndicate of Alexandria
Item Data
University Alexandria
Faculty Faculty of Engineering
Department Electric and Communication
Qualification B.Sc of electronic & Communication
General Grade Very Good
Graduation Year 1995
Graduation Project Data Acquisition system
Project Grade Excellent

3. Name:AlaaEl Din Hassan Mohammed Mustafa
Date:Aug, 2014
Page 3 of 9
 Good knowledge of various types of Field instrument installation and calibration.
 Good knowledge of Construction, configuring and troubleshooting of Programmable logic controller
"PLC" ( Simatic S5 , S7 )
 Good knowledge of the Distributed control systems "DCS" (TPS Honeywell, YOKOGAWA Centum
CS3000 R3).
 Configuring various types of microprocessor single loop controllers.
 Good knowledge of how to deal with the electric wiring and the sequence of the start-up and shut
down of control programs (ESD).
 Good knowledge of CMMS procedures & planning.
 Ability to work individually and as a co-operative team member.
 Ability to work under pressure, Creative, Self-motive, reliable and dynamic, good adaptabilityto a
multinational environment, with wide exposure to various cultures and customs.
 Recognized training and experience in the field of instrumentation and control systems.
 Supervisory and good communication skills.
 Good technical team skills.
 Good leadership and interpersonal skills and the ability to work as a team member under project
schedule pressures.
 Interpretation and application of project technical specifications.
 Pertinent national and international standards.
 Work processes leading to site acceptance testing and mechanical completion of facilities.
 Experience of planning, scheduling, supervision of senior technological personnel.
 Supervision of maintenance activities (P.M. or C.M.) for field Instruments and local panels)
 A co - operative member of CMMS Alexandria Pet. Co. (APC) team.
 Instrumentation and Maintenance Instructor for El Mansour international consultancy & training
centre.
General Responsibilities acquired through carrier
 Prepare verbal or writtenreportsas required,statingthe currentworkloadinthe group and whether
it will meetsettargets. If not,give the reasonswhy not and listthe stepstaken,or whichneedto be
taken, to get back on target.
 Liaise closelywiththe variousProjectEngineersforwhomthe groupisdoingwork.Thiswillenablethe
latestdevelopments,whichmayaffectthe schedule tobe ascertained.Advisethemof problemareas.
 Make sure thatall the informationneededbyengineerstoperformtheirworkisavailablebefore they
need it so that work progresses at a smooth and steady pace, on time and on target.
 Ensure that work done in the discipline is accurate and correct.
 Provide Employee Assessments on their performance of the various Engineers/Designers during
contract renewal.
 Ensure that any necessaryreference material isreadilyavailable toEngineerswhetheritisa National
or Client Standard, Procedure or recognized Code of Practice. Also, ensure that the most commonly
used vendor literature is available.
 Allocate workpackagesto suitable Engineers,monitorprogressagainstthe schedule,resolve queries
and generally expedite the progress of the design.
 Liaise with Engineering Manager with respect to resources and equipment requirements needed for
the discipline to complete the work.
 Ensure that the discipline Engineering work is performed based on correct Engineering standards.
 Ensure work performed within the discipline is executed within the allocated man-hours.
 Confident in Engineering ability and experience to handle queries and problems as they arise.
 Able to grasp the important facts in a project and to create a schedule of work for the discipline
Engineers which gets the work done on schedule and within the man-hours.

4. Name:AlaaEl Din Hassan Mohammed Mustafa
Date:Aug, 2014
Page 4 of 9
 Aware of the strengths and weaknesses of the group discipline Engineers, allocate work accordingly,
provide tuitiontoaddressthe weaknessesandgenerallypromote greaterexpertise withinthe group.
 Able to act as a Lead Engineer on a large scale project.
 Able to assess Value Engineering and Constructability issues.
Carrier History
June 2013 to Dec 2013
Position: Lead E&I Engineer
Project: MIES (Q570) CDR PROJECT, QAFAC, Qatar.
Company: QCON (Qatar Engineering & Construction Company).
Job Description:
 Ensure direct reports are fully aligned and empowered to deliver.
 Coordinate multidiscipline engineering activities to ensure projects are designed in a safe,
efficient, cost effective and timely manner.
 Supervise the workof otherinstrumentengineersonotherpackages/projectsrelatedtothe field
development plan;
 Assistincreationandcoordinationof overall projectplansandschedules,andmonitorsactivities,
progress, and milestones;
 Lead Instrument Engineer for capital projects, ongoing maintenance, and turnarounds for a
midsized, complex petroleum refinery.
 Coordinate and collaborate with client to develop project work scope and goals.
 Perform field investigations; design, size, select, and specify equipment; write construction
specifications (with adherence to Industrial Codes and client specifications and practices and
clientapprovedvendorlists);developoperatingguidelines;assistinprocurement;evaluate bids;
evaluate acceptance testing;estimate andschedule(engineering,design,andconstruction);field
support construction; support start-ups and cut-overs; and maintain project controls/tracking.
 Adhere toclientmanagementof change processesmaintainingupdatedandas-builtP&IDs,One
lines, Area Classifications and Loop Diagrams.
 Coordinate andcollaborate withclientformaintainability,constructability,reliability,andsafety.
 Maintain project files.
 Development of technical studies and reports.
 Participate in safety reviews and hazard analyses.
 Coordinate engineering and design activities with other project disciplines.
 Provide technical guidance to design staff.
 Providingfinal checkingandapproval of all designdeliverablesassociatedwithinstrumentation,
controls, and electrical systems.
 Coordinate vendor acceptance testing, collection of vendor data, and development of project
data files.
 Support of construction, commissioning and start-up of new facilities.
 Provide instruction and training on controls systems hardware/software configuration and
operating philosophy.
 Providing technical support for existing facility.
December 2011 to July 2012
Position: Sr. Construction, Installation Supervision, QA/QC & Testing
and Commissioning Instrument Engineer.
Project: Gulf of Suez NGL Plant, EBGDCo.

5. Name:AlaaEl Din Hassan Mohammed Mustafa
Date:Aug, 2014
Page 5 of 9
Company: GTS Global Technical Service.
Job Description:
 Installation & Construction Supervision for the SCADA Allen Bradly Control Logix PLC System
(System Cabinet and Marshalling Cabinet) at the new Control Room.
 Installation & Construction Supervision for all Instrument Cable works (Trenches, trays, pulling,
laying, glanding, connection and termination).
 Installation&ConstructionSupervisionfor allthe fieldJunctionBoxesinstallationwork(Analogue,
Digital and F&G)
 Installation&ConstructionSupervisionforalltheFieldInstrument(Transmitters,Switches,valves,
indicators…etc.) installation works.
 Installation & Constructions Supervision for all the F&G Detectors (Gas, Hydrogenand Fire UVIR
detectors).
 Supervision the cable continuity, cold and hot instrument loopcheck (Input, output, digital and
analogue), resolve loop problems if appears.
 Testing and Commissioning for all the Field Instrument, and carry out a function test for these
instruments.
 Testing,Commissioningandstart-up for new PLC control system (Allen Bradly – Control Logix).
 Installationandcommissioningforthe interfacebetweenthe newfieldequipment,MCCandnew
PLC system at the new control room.
 Carry out Process and F&G Cause and Effect validation.
 Prepare and submit the Instrument Red Mark/Final As-Built drawing for the project.
July 2010 to March 2012
Position: Sr. Construction, Installation Supervision, QA/QC & Testing
and Commissioning Instrument Engineer.
Project: YEMEN LNG Upstream Project – Phase II CPU Sites.
Company: PESCO Energy Field Services & Contracting
Job Description:
 Responsible forreview engineeringdeliverable instrumentdocumentsanddrawing to comment
and assure quality, these documents and drawings such as:-
 Project Specification “DCS, ESD, PLC, SCADA, F&GS, Field Instrument, instrument cables,
Package equipment ... etc.”
 Material Requisitions for instrument & Control “DCS, ESD, PLC, PSV & SRV, Control Valves,
Shutdown Valves, Cables ... etc.”
 Instrument Data Sheet “Transmitters, Gauges,PSV & SRV, Control Valves, Shutdown Valves
...etc.”
 System Drawing “Architecture, Logic, Loop Drawing … etc.”
 Process Philosophy, Shutdown philosophy, PFD, PID and Cause & Effect.
 Responsible for preparing instruments and instrument valves data sheets.
 Review the instruments and instrument valves vendor drawings and data, interface with
suppliers, and other engineering disciplines.
 Participate in the development of P&ID's, cause and effect.
 Extract and preparing Instrument location layouts, Cable routing layout.
 Perform cable tray sizing,
 Prepare cable schedule,junctionbox and control panels wiring diagram, Instrument installation
details (Hook up drawings)
 Prepare an MTO and material requisitionfordetailedinstallationmaterials(Cables, Cable trays)
 Installation & Construction Supervision for the following:
 Instrument Cable Trays and Trenches
 Junction Boxes and Main Panels and Cabinets.

6. Name:AlaaEl Din Hassan Mohammed Mustafa
Date:Aug, 2014
Page 6 of 9
 Field Instrument
 Supervision for all the Instrument Preliminary Calibration (Contractor Workshop).
 Supervisionthe cable continuity,cold and hot instrumentloop check (Input,output,digital and
analogue), resolve loop problems if appears.
 Carry out Cause & Effect (Process, ITR and F&G) validation.
 Review and Approve the Red-Mark dwg. Provided by contractor.
 Prepare and completion of Pre-Commissioning and Commissioning Dossiers.
July 2008 to December 2008
Position: Sr. Construction, Installation Supervision, QA/QC Instrument
Engineer.
Project: 2158 New Filtration Unit ORYX GTL PRJOCT, RAS LAFFAN
INDUSTRIAL CITY – QATAR
Company: GL (Germanischer Lloyd Industrial Service. Gmbh Qatar)
Job Description:
 Responsible for preparing instruments and instrument valves data sheets.
 Prepare an instrument and instrument valves requisitions and issue technical bid tabulation for
different type of field instrument.
 Review the instruments and instrument valves vendor drawings and data, interface with
suppliers, and other engineering disciplines.
 Participate in the development of P&ID's, cause and effect.
 Extract and preparing Instrument location layouts, Cable routing layout.
 Perform cable tray sizing,
 Prepare cable schedule,junctionbox and control panels wiring diagram, Instrument installation
details (Hook up drawings)
 Installation & Construction Supervision for the following:
 Instrument Cable Trays and Trenches
 Junction Boxes and Main Panels and Cabinets.
 Field Instrument
 Supervision for all the Instrument Preliminary Calibration (Contractor Workshop).
February 1999 to December 1999
Position: Sr. Construction, Installation Supervision & Testing and
Commissioning Instrument Engineer.
Project: Boiler100T/Hr forAlexandriaNational Co.forPetrochemicals
and condensates
Company: TksenKrupe Energy Services
Job Description:
 Construction,LoopTesting,Commissioning(ColdandHot) of Boiler100 t/hr and watertreatment
unit for Alexandria National Co. for Ref. & Petrochemicals (ANRPEC).
 Installation&ConstructionSupervisionfor SIMATICSEMEINSS7 PLC System(SystemCabinetand
Marshalling Cabinet) at the new Control Room.
 Installation & Construction Supervision for all Instrument Cable works (Trenches, trays, pulling,
laying, glanding, connection and termination).
 Installation&ConstructionSupervisionforallthe fieldJunctionBoxesinstallationwork(Analogue,
Digital and F&G)
 Installation&ConstructionSupervisionforalltheFieldInstrument(Transmitters,Switches,valves,
indicators…etc.) installation works.

7. Name:AlaaEl Din Hassan Mohammed Mustafa
Date:Aug, 2014
Page 7 of 9
 Supervision the cable continuity, cold and hot instrument loopcheck (Input, output, digital and
analogue), resolve loop problems if appears.
 Testing and Commissioning for all the Field Instrument, and carry out a function test for these
instruments.
 Testing,Commissioningandstart-up for new PLC control systemInstallationandcommissioning
for the interface betweenthe new fieldequipment,MCCandnew PLC systemat the newcontrol
room.
 Prepare and submit the Instrument Red Mark/Final As-Built drawing for the project.
September 1998 until now
Position: Instrument and Control Section Head Engineer.
Company: Alexandria Petroleum Co.
Job Description:
 I workedasinstrumentsectionheadandresponsible forinstrumentationworkshopsupervise on
the preventivemaintenance andcorrective maintenance forall fielddevicesandcontrol systems
in in the Utility Equipment (Boilers, Water Treatment, Air Compressors…etc.)
 Complying with safety regulation & standing instructions of company.
 Assist in trouble-shooting, fault diagnosis and solving day to day problems as they arise on
supervisory/control/instrumentationequipmentinutilityareas,andprovideadviceasrequested.
 Supervise the maintenance for different types of valves (Globe, Angle, Butterfly, Ball, Plug,
throttling control valves and On/Off shut off valves).
 Issue the spare parts material requires for all instrument field devices.
 Working in the team that established the maintenance computerized program IMPACT CMMS,
finalize that project and put it in service
 Review all instrumentation assets in the plant, and review all instrumentation work plan and
maintenance plan and maintenance work instruction for all instrumentation in the plant.
 Construction,LoopTesting,Commissioning(ColdandHot) and maintenance of BoilersBF9101 &
BF9102 for Alexandria Pet. Co.
 Commissioning of Gardener Denver and Atlas Copco air compressors.
 Replacement of the old SIMATIC SEMIENS S5 PLC to be the latest type SIMATIC SEMIENS S7
 Preparingthe technical &engineeringspecifications,Scope of work,studying,Construction,Loop
testing and commissioning and maintenance for HITACHI ZOSEN 68 T/Hr boiler and water
treatment unit and for Rehabilitation of Boilers BF - 9101 & BF - 9102 for Alexandria Pet. Co.
 Installation, commissioning and Maintenance of flame detecting system for Alexandria Cement
Co.
 Replacing and configuring of single loop controllers for combustion controlling system & feed
water steam controlling system.
 Design,wire,configuringandcommissioningof BMSof boilers9101&9102 forAlexandriaPet.Co.
 Loop Testing, Commissioning (Cold and Hot) of KERR Pump and its Murphy control panel for
PETROJET Co.
 Issue "newmaterials"purchaserequisitionsforthe notavailablematerialsandtools,andconfirm
availability of economical stock level.
 Perform on job training for total of 3 instrument engineers, and for four senior technicians in
instrumentations topics.
 Evaluate, diagnose and rectify control systems faults.
 Evaluate the work of external consultants,contractorsand engineersinvolvedinthe designand
maintenance of automation systems.

8. Name:AlaaEl Din Hassan Mohammed Mustafa
Date:Aug, 2014
Page 8 of 9
 Review and make comments on the instrumentation and control aspects of all engineering
projects undertakenin assigned field including preparation of requirements,reviewingscope of
work, technical specification, and conceptual basics and detailed engineering packages.
 Conduct periodical surveys on Instrumentation & Control Systems, ESD and F&G.
 Analyse the frequentproblemstoachieve finalsolutiontakingintoconsiderationtheefficientand
most economical way.
 Participate inpreparingplansandestablishmentsof preventive andmajoroverhaulmaintenance
schedules and resources for all instrument/control systems.
 Exclude and establish the cause and effect diagrams from existing working PLC programs.
 Experienced in developing & reviewing and technically accepting P&ID's, instrument loop
diagrams, instrument index and database, instrument specification sheets, cable routing
diagrams,hookupdiagrams,plotplanlayoutdrawings,causeandeffectdiagrams andequipment
specifications for bid tender documents, bid evaluations and other.
 Revise the existing obsolete PLC systems details from site and establish scope of work for
upgrading purposes without shutdown co-coordinated with contractor.
 Review and evaluate the offers and terms of new contracts for new packages and projects.
 Prepare the relative punch lists / commissioning and hand over for new projects.
 Read and interpret Electrical and Instrumentation loop drawings.
 E&I Quality Control Engineer with good knowledge of QC procedures.
 Good knowledge of Construction, Commissioning and loop testing procedure.
 Good knowledge of various types of Field instrument installation and calibration.
 Able to Maintenance & trouble shooting of measurement systems for both gas & oil product.
 Good knowledge of Construction , configuring and troubleshooting of Programmable logic
controller "PLC" ( Simatic S5 , S7 )
 Good knowledge of the Distributedcontrol systems"DCS"(TPSHoneywell,YOKOGAWA Centum
CS3000 R3).
 Configuring various types of microprocessor single loop controllers.
 Goodknowledgeof howtodeal withthe electricwiringandthe sequence of the start-upandshut
down of control programs (ESD).
 Good knowledge of CMMS procedures & planning.
 Ability to work individually and as a co-operative team member.
 Abilitytowork underpressure,Creative,Self-motive,reliable anddynamic,goodadaptabilityto
a multinational environment, with wide exposure to various cultures and customs.
 Recognized training and experience in the field of instrumentation and control systems.
 Supervisory and good communication skills.
 Good technical team skills.
 Good leadershipandinterpersonal skillsandthe abilitytoworkasa team memberunderproject
schedule pressures.
 Interpretation and application of project technical specifications.
 Pertinent national and international standards.
 Work processes leading to site acceptance testing and mechanical completion of facilities.
 Experience of planning, scheduling, supervision of senior technological personnel.
 Supervision of maintenance activities (P.M. or C.M.) for field Instruments and local panels)
Training
 TPS Systems (GUS/US) APM/HPM Maintenance and Troubleshooting in Honeywell Automation
College (USA), Two weeks

9. Name:AlaaEl Din Hassan Mohammed Mustafa
Date:Aug, 2014
Page 9 of 9
 Methods of measurement of physical quantities such as Temperature, Pressure, Level,
Flow….etc., Two weeks
 Tuning of PID Controllers
 Honeywell TPS System (DCS) Construction & configuration & LCN, Two weeks
 Honeywell TPS System (DCS) Built Area & NCF, Two weeks
 Honeywell TPS System (DCS) HPMImplementation
 PLC Construction & configuration & trouble shooting in Egyptian society of the engineers,Two
weeks
 Programming using Step 5 language in Alexandria Petroleum Co. training centre, Two weeks.
 Siemens Simatic Step 7 PLC in Faculty of Engineering
 Advanced boiler operation in Faculty of Engineering of Alexandria
 Automatic control of boilers
 Maintenance and Troubleshooting for engineers in Suez Oil Processing Petroleum Co. training
centre
 YOKGGAWA Centum CS3000 R3 System