Coord
•Download as TXT, PDF•
0 likes•40 views
This document contains a series of numeric values separated by commas, with each line containing 3 values that are likely measurements of some kind as they vary across multiple lines. The first value on each line is consistently the largest and they decrease with each subsequent line, suggesting they could represent sequential time-series data points.
Report
Share
Report
Share
Recommended
Tabel chi
The document shows a table of critical values for the chi-square distribution for different degrees of freedom (df) and significance levels (α). The table lists the critical values of the chi-square distribution for df ranging from 1 to 1000 and α values of 0.1, 0.05, 0.025, 0.01, 0.005, and 0.001. This table can be used to determine if a calculated chi-square value is statistically significant for a given df and α.
Tabel Nilai Kritis Distribusi Chi-Square
This document contains a table of critical values for the chi-square distribution with degrees of freedom (df) ranging from 0 to 136 and significance levels of 0.1, 0.05, 0.025, 0.001, and 0.005. The table lists the critical value that corresponds to each combination of df and significance level.
Chi square table
This document contains a Chi-Square distribution table that lists critical values of the Chi-Square distribution for different degrees of freedom and significance levels. The table can be used to determine the critical value of Chi-Square needed to reject or fail to reject a null hypothesis for a given significance level and number of degrees of freedom in a Chi-Square test of independence or goodness of fit.
Valores para calcular chi cuadrado crítico
1) The table shows the Chi-square distribution with values of x for different degrees of freedom (g) and probabilities (p) of x being greater than the table value.
2) For a given g and p, x is the Chi-square value such that the probability of being greater than x is equal to p.
3) The table provides Chi-square values for probabilities of 0.001 to 0.999 and degrees of freedom from 0 to 100.
desarr
This document contains a list of 45 data points with two values each: a numeric x-value and a corresponding y-value. The x-values range from 0.7943283 to 100 in increasing order, while the y-values decrease from 102.4378 to 0.00174015 as x increases.
105指考成績人數累計
This document contains data on exam scores from the 105th academic year for unspecified subjects. It shows the number and percentage of students who scored within given ranges, cumulatively from highest to lowest scores and vice versa. For example, 1 student scored 100, and 47859 students took the exam, meaning 100% scored below 100. The majority of students scored between 50-60, with over 19000 students scoring between 51-52. Similar data is provided for Chinese scores.
Millimeter To Inch Conversion Table
The document is a conversion table that lists millimeter measurements from 0.01 to 100 in increments of 0.01 and their equivalent measurements in inches.
Decimal Equivalents Of Number Size Drills
The document lists decimal equivalents of drill sizes from #1 to #80 in a table with 4 columns. It provides the size of each drill in inches in increments decreasing from 0.2280 inches for the #1 drill to 0.0135 inches for the #80 drill size.
Recommended
Tabel chi
The document shows a table of critical values for the chi-square distribution for different degrees of freedom (df) and significance levels (α). The table lists the critical values of the chi-square distribution for df ranging from 1 to 1000 and α values of 0.1, 0.05, 0.025, 0.01, 0.005, and 0.001. This table can be used to determine if a calculated chi-square value is statistically significant for a given df and α.
Tabel Nilai Kritis Distribusi Chi-Square
This document contains a table of critical values for the chi-square distribution with degrees of freedom (df) ranging from 0 to 136 and significance levels of 0.1, 0.05, 0.025, 0.001, and 0.005. The table lists the critical value that corresponds to each combination of df and significance level.
Chi square table
This document contains a Chi-Square distribution table that lists critical values of the Chi-Square distribution for different degrees of freedom and significance levels. The table can be used to determine the critical value of Chi-Square needed to reject or fail to reject a null hypothesis for a given significance level and number of degrees of freedom in a Chi-Square test of independence or goodness of fit.
Valores para calcular chi cuadrado crítico
1) The table shows the Chi-square distribution with values of x for different degrees of freedom (g) and probabilities (p) of x being greater than the table value.
2) For a given g and p, x is the Chi-square value such that the probability of being greater than x is equal to p.
3) The table provides Chi-square values for probabilities of 0.001 to 0.999 and degrees of freedom from 0 to 100.
desarr
This document contains a list of 45 data points with two values each: a numeric x-value and a corresponding y-value. The x-values range from 0.7943283 to 100 in increasing order, while the y-values decrease from 102.4378 to 0.00174015 as x increases.
105指考成績人數累計
This document contains data on exam scores from the 105th academic year for unspecified subjects. It shows the number and percentage of students who scored within given ranges, cumulatively from highest to lowest scores and vice versa. For example, 1 student scored 100, and 47859 students took the exam, meaning 100% scored below 100. The majority of students scored between 50-60, with over 19000 students scoring between 51-52. Similar data is provided for Chinese scores.
Millimeter To Inch Conversion Table
The document is a conversion table that lists millimeter measurements from 0.01 to 100 in increments of 0.01 and their equivalent measurements in inches.
Decimal Equivalents Of Number Size Drills
The document lists decimal equivalents of drill sizes from #1 to #80 in a table with 4 columns. It provides the size of each drill in inches in increments decreasing from 0.2280 inches for the #1 drill to 0.0135 inches for the #80 drill size.
106成績人數累計
The document appears to be statistics on exam scores from the 106th academic year for unspecified subjects. It provides data on the number and percentage of students who scored within given ranges, cumulatively from the highest to lowest scores. For example, it shows that for scores from 100-100.99, 1 student scored in that range, making up 0% of the total 45,290 students.
Resultado fluxodata
The document appears to contain numerical data across 24 entries organized into columns. The first column contains values ranging from 18 to 87 that generally increase from top to bottom. The second column contains similar values that also tend to increase together with the first column. The third column contains higher values than the first two. The remaining columns contain smaller numerical values.
DSI Inches to Decimal - Millimeter Conversion Chart
This document provides conversion tables between inches and millimeters as well as a 32 millimeter multiplication table. The inch to millimeter conversion table lists incremental inch measurements from 0.0156 to 1 inch converted to millimeters. The 32 millimeter multiplication table shows the result of multiplying whole numbers from 1 to 76 by 32.
Guia 13
The document shows payroll information for 16 employees including basic salary, bonuses, overtime hours and rates, night hours and rates, deductions, and net pay. It provides details on hours worked, pay rates, bonuses earned, deductions taken, and total amounts earned and paid to each employee.
Inch To Millimeter Conversion Table
This document contains several conversion tables for converting between decimals, fractions, and millimeters. It includes tables for converting decimals to millimeters from 0.001 to 1.000 mm, fractions to their decimal equivalents and then to millimeters, and common fractions to their decimal equivalents and millimeters.
Pricing Predictions for Diesel/ Nominal
This document shows the historical and projected prices of diesel oil per barrel and per million British thermal units (MMBtu) for Hawaii Electric Light Company from 2010 to 2035. The prices are shown as reference prices for each year as well as high and low ranges. Over this period, the reference price of diesel oil per barrel increased from $102.34 in 2010 to a projected $288.66 in 2035, and the reference price per MMBtu increased from $17.46 to an estimated $49.26.
Inches to-millimeters-conversion-chart
This document contains a conversion chart that lists inches and the corresponding values in millimeters. It provides conversions from 0.1 inches up to 1000 inches in increments of 1 inch. For each inch measurement, the equivalent millimeter measurement is given. At the bottom is a note about a sister website for world time zones.
Tabel besi
This document contains tables with information about steel beams and columns including:
- Dimensions and cross-sectional areas of different steel beam and column sizes
- Weights in kg/m of steel beams and columns
- Cross-sectional areas in cm^2 of steel plates
- Dimensions are given in mm and information is provided for a range of standard sizes.
京都大学図書館機構概要2009
The document summarizes information about the Kyoto University Library Machine Room in 2009. It includes details like the room numbers and phone extensions of various sections of the library, basic concepts and objectives of the machine room, an organizational chart of the library, and a list of academic papers published by researchers at Kyoto University.
Gsom1
The document appears to contain statistical data in tables across multiple years (1998, 2000, 2002). The data seems to cover topics like transportation, industry, resources, and more. Specifically, it includes metrics like production amounts, transportation amounts, resources amounts, percentages, and population. The data is broken down by category and year.
Tabla de comparacion pago de pmg 2020 completa
Tabla para aplicar el articulo 9 ter de la ley que exige la comparación de escalas municipal con sector público
Lib
The document contains a table with two columns of numbers representing x and y coordinates plotted on a graph. The x-values increase by 1 each row from 0 to 15, while the corresponding y-values decrease in a linear fashion from 0 to approximately -3500. A line graph is shown with the x and y coordinates plotted, showing a steady negative linear relationship between the two variables as x increases.
Sanhuu udirdlaga
The document appears to contain numerical data in a table format with percentages listed across the top and increasing whole numbers down the left side. The interior of the table contains increasing decimal values with up to 4 decimal places.
Test 2 Grades
This document is a test score summary for Mr. Lomas' class on transformations. It lists 57 student identification numbers along with their individual grades on Test 2 which covered transformations. The average grade for the class was 69.1%. The grades ranged from 35% to 94% with most students scoring between 45-85%.
Decimal chart bad
This document provides a table that converts fractions of an inch to millimeters and vice versa in increments from 1/64 of an inch up to 1 inch. It includes both fractional inch and decimal inch equivalents as well as the corresponding millimeter measurements.
房貸本息表
This document contains two loan amortization schedules with interest rates of 7.5% and 8.25%, loan amounts of $5,500,000, and terms of 300 and 288 payments respectively. It lists the payment periods, payment amounts, interest paid, remaining balance, and original balance for each schedule broken out by period.
Yis
This document contains a payroll summary table with employee names, salary information, hours worked, deductions and net pay amounts. It lists the basic salary, bonuses, extra hours, night hours, club and medical deductions and totals for 16 employees including Pedro, Juan, Maria and others. Their basic pay, overtime, deductions and net pay due are shown in multiple columns.
Gpz bearing catalogue
Beijing Huanqiu Guangyang Bearings Co.,Ltd(GPZ Bearing), the professional manufacturer and exporter of high quality ball and roller bearings with more than 20 years of experience to meet the customers require.
We have won good market in Eastern European countries,Southeast Asia,American countries.
Choose GPZ Bearing to won your market based on quality guarantee.
We thank you for your attention and look forward to the cooperation with you!
Sincerely Yours,
Alan Yu
Export Manager
BEIJING HUANQIU GUANGYANG BEARINGS CO.,LTD
Tel:86-15101602678
Fax:86-319-6112678
Cell: 86-15032602678/ 15354192678
Email: alan@gpzbearing.com
Yahoo: gpzbearing@yahoo.com
MSN: gpzbearing@live.com
Gmail: gpzbearing@gmail.com
Skype: gpzbearing
Web: www.gpzbearing.com / www.gpzbearing.net
Kerala livsetock trend state planning board 1966 to 2007
This document shows data on livestock populations in Kerala, India from census years 1966 to 2007. It provides the numbers and percentages of various livestock (cattle, buffalo, goats, pigs, poultry, and ducks) in Kerala compared to all of India for selected census years. The populations of most livestock in Kerala have decreased over time as percentages of the national totals, except for goats which increased until the late 1990s and have since decreased. Poultry numbers in Kerala peaked in the late 1980s and early 1990s before declining.
Nomina 1
The document shows payroll information for 14 employees including basic salary, bonuses for seniority and overtime hours worked. It also includes deductions for social services and medical insurance. Total earnings and deductions are calculated, as well as the net amount to be paid to each employee.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
More Related Content
What's hot
106成績人數累計
The document appears to be statistics on exam scores from the 106th academic year for unspecified subjects. It provides data on the number and percentage of students who scored within given ranges, cumulatively from the highest to lowest scores. For example, it shows that for scores from 100-100.99, 1 student scored in that range, making up 0% of the total 45,290 students.
Resultado fluxodata
The document appears to contain numerical data across 24 entries organized into columns. The first column contains values ranging from 18 to 87 that generally increase from top to bottom. The second column contains similar values that also tend to increase together with the first column. The third column contains higher values than the first two. The remaining columns contain smaller numerical values.
DSI Inches to Decimal - Millimeter Conversion Chart
This document provides conversion tables between inches and millimeters as well as a 32 millimeter multiplication table. The inch to millimeter conversion table lists incremental inch measurements from 0.0156 to 1 inch converted to millimeters. The 32 millimeter multiplication table shows the result of multiplying whole numbers from 1 to 76 by 32.
Guia 13
The document shows payroll information for 16 employees including basic salary, bonuses, overtime hours and rates, night hours and rates, deductions, and net pay. It provides details on hours worked, pay rates, bonuses earned, deductions taken, and total amounts earned and paid to each employee.
Inch To Millimeter Conversion Table
This document contains several conversion tables for converting between decimals, fractions, and millimeters. It includes tables for converting decimals to millimeters from 0.001 to 1.000 mm, fractions to their decimal equivalents and then to millimeters, and common fractions to their decimal equivalents and millimeters.
Pricing Predictions for Diesel/ Nominal
This document shows the historical and projected prices of diesel oil per barrel and per million British thermal units (MMBtu) for Hawaii Electric Light Company from 2010 to 2035. The prices are shown as reference prices for each year as well as high and low ranges. Over this period, the reference price of diesel oil per barrel increased from $102.34 in 2010 to a projected $288.66 in 2035, and the reference price per MMBtu increased from $17.46 to an estimated $49.26.
Inches to-millimeters-conversion-chart
This document contains a conversion chart that lists inches and the corresponding values in millimeters. It provides conversions from 0.1 inches up to 1000 inches in increments of 1 inch. For each inch measurement, the equivalent millimeter measurement is given. At the bottom is a note about a sister website for world time zones.
Tabel besi
This document contains tables with information about steel beams and columns including:
- Dimensions and cross-sectional areas of different steel beam and column sizes
- Weights in kg/m of steel beams and columns
- Cross-sectional areas in cm^2 of steel plates
- Dimensions are given in mm and information is provided for a range of standard sizes.
京都大学図書館機構概要2009
The document summarizes information about the Kyoto University Library Machine Room in 2009. It includes details like the room numbers and phone extensions of various sections of the library, basic concepts and objectives of the machine room, an organizational chart of the library, and a list of academic papers published by researchers at Kyoto University.
Gsom1
The document appears to contain statistical data in tables across multiple years (1998, 2000, 2002). The data seems to cover topics like transportation, industry, resources, and more. Specifically, it includes metrics like production amounts, transportation amounts, resources amounts, percentages, and population. The data is broken down by category and year.
Tabla de comparacion pago de pmg 2020 completa
Tabla para aplicar el articulo 9 ter de la ley que exige la comparación de escalas municipal con sector público
Lib
The document contains a table with two columns of numbers representing x and y coordinates plotted on a graph. The x-values increase by 1 each row from 0 to 15, while the corresponding y-values decrease in a linear fashion from 0 to approximately -3500. A line graph is shown with the x and y coordinates plotted, showing a steady negative linear relationship between the two variables as x increases.
Sanhuu udirdlaga
The document appears to contain numerical data in a table format with percentages listed across the top and increasing whole numbers down the left side. The interior of the table contains increasing decimal values with up to 4 decimal places.
Test 2 Grades
This document is a test score summary for Mr. Lomas' class on transformations. It lists 57 student identification numbers along with their individual grades on Test 2 which covered transformations. The average grade for the class was 69.1%. The grades ranged from 35% to 94% with most students scoring between 45-85%.
Decimal chart bad
This document provides a table that converts fractions of an inch to millimeters and vice versa in increments from 1/64 of an inch up to 1 inch. It includes both fractional inch and decimal inch equivalents as well as the corresponding millimeter measurements.
房貸本息表
This document contains two loan amortization schedules with interest rates of 7.5% and 8.25%, loan amounts of $5,500,000, and terms of 300 and 288 payments respectively. It lists the payment periods, payment amounts, interest paid, remaining balance, and original balance for each schedule broken out by period.
Yis
This document contains a payroll summary table with employee names, salary information, hours worked, deductions and net pay amounts. It lists the basic salary, bonuses, extra hours, night hours, club and medical deductions and totals for 16 employees including Pedro, Juan, Maria and others. Their basic pay, overtime, deductions and net pay due are shown in multiple columns.
Gpz bearing catalogue
Beijing Huanqiu Guangyang Bearings Co.,Ltd(GPZ Bearing), the professional manufacturer and exporter of high quality ball and roller bearings with more than 20 years of experience to meet the customers require.
We have won good market in Eastern European countries,Southeast Asia,American countries.
Choose GPZ Bearing to won your market based on quality guarantee.
We thank you for your attention and look forward to the cooperation with you!
Sincerely Yours,
Alan Yu
Export Manager
BEIJING HUANQIU GUANGYANG BEARINGS CO.,LTD
Tel:86-15101602678
Fax:86-319-6112678
Cell: 86-15032602678/ 15354192678
Email: alan@gpzbearing.com
Yahoo: gpzbearing@yahoo.com
MSN: gpzbearing@live.com
Gmail: gpzbearing@gmail.com
Skype: gpzbearing
Web: www.gpzbearing.com / www.gpzbearing.net
Kerala livsetock trend state planning board 1966 to 2007
This document shows data on livestock populations in Kerala, India from census years 1966 to 2007. It provides the numbers and percentages of various livestock (cattle, buffalo, goats, pigs, poultry, and ducks) in Kerala compared to all of India for selected census years. The populations of most livestock in Kerala have decreased over time as percentages of the national totals, except for goats which increased until the late 1990s and have since decreased. Poultry numbers in Kerala peaked in the late 1980s and early 1990s before declining.
Nomina 1
The document shows payroll information for 14 employees including basic salary, bonuses for seniority and overtime hours worked. It also includes deductions for social services and medical insurance. Total earnings and deductions are calculated, as well as the net amount to be paid to each employee.
What's hot (20)
DSI Inches to Decimal - Millimeter Conversion Chart
DSI Inches to Decimal - Millimeter Conversion Chart
Kerala livsetock trend state planning board 1966 to 2007
Kerala livsetock trend state planning board 1966 to 2007
Recently uploaded
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
Recently uploaded (20)
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...