The document discusses fluid-applied cool roofing systems using Astec membranes. It provides information on when to consider a fluid-applied cool roofing system over repair, replacement, or re-ply options. It also describes a case study where using an Astec re-ply system on an existing EPDM roof saved an estimated $600,000 compared to replacement. The document promotes Astec products and systems for their quality, cool roof benefits, ability to solve roof problems through seamless application, and Astec's experience and certification.

1. “ White is Green” Cool Roofing with Fluid Applied Membranes

2. Discussion Topics Going “Green” at what price? Sustainability & Cool Roofing. Repair, Replace, Re-Ply…you have options. Project case study…$600,000 immediate savings. 5 ways to save on your roofing budget…today!

3. Questions to Answer Where do you use a Fluid-Applied Cool roofing system? When do you consider using this type of system…repair, replace, Re-Ply? How do you evaluate a potential roof? How is the system installed properly? And a Project Case Study immediate savings of over $600,000

4. Insulating Coatings Corporation Manufacturing Astec since 1986 Hundreds of millions of sq. ft applied Network of Qualified Contractors

5. Important Affiliations

6. Astec “Cool Roofing” Projects EPDM…rubber Metal Asphalt

7. Sands Conv. Center White EPDM….over $1.5 million saved

8. New Orleans Conv. Center Metal…big savings on 200,000 sq. ft.

9. U.S. Naval Museum … before Asphalt

10. U.S. Naval Museum… after Asphalt…saved over $500,000

11. Going “Green” … a truly “Green” roof should be identified as: “… a roofing system that is designed, constructed, maintained, rehabilitated, and demolished with an emphasis throughout its’ life-cycle on using resources efficiently and preserving the global environment.” Oak Ridge National Laboratory, 1996

12. Sustainable Roof Minimizes the burden on the environment by using the earth’s resources responsibly Conserves energy by improving the thermal efficiency of roofs Extends roof life span by improving long-term performance International Council for Research and Innovation in Building and Construction…formerly CIB

13. Replace vs Re-Ply…Options? Does your roof need to be torn off? What condition is your substrate? Is your insulation wet or dry? What do your flashings look like? Where specifically are your roofing issues? What type of deck do you have? You need Answers!

14. Where to Start? Every Roof Needs to be Evaluated

15. Roof Inspection

16. Roof Inspection…Asphalt

17. Evaluate the Roof

18. Penetrations… bad repairs

19. Penetrations & Flashings

20. Flashings Failing

21. Seams Separating

22. Old Patches

23. Temporary Repairs

24. Penetrations…costly for re-roof

25. Penetrations… difficult to flash around

26. Flashings… not so difficult with Astec Re-Ply

27. The Astec Re-Ply Process Repair Clean Flash Waterproof…Base Waterproof…Finish Inspect

28. Proper Cleaning a Must!

29. Power Wash Substrate

30. Re-Flash Seams & Penetrations EPDM

31. Flashing & Seams Asphalt

32. Metal seams & fasteners

33. Skylights… need attention

34. Skylights

35. Penetrations

36. Penetration Details

37. Finished Astec Re-Ply “ Cool Roof”

38. Success is in the details

39. Success is in the details

40. Replace vs. Re-Ply ® … Case Study American Baptist Center Estimated savings…$600,000

41. American Baptist Center EPDM

42. American Baptist Single-Ply EPDM…second layer Original Roof Built-Up Asphalt Worked with Roof Consultant Needed Repairs…drains, seams, flashings Chalky surface

43. Evaluate Roof

44. Repair bad areas

45. Repair

46. American Baptist Repaired Cleaned properly Re-Flashed Seams & Penetrations w/ Astec 2000 Fluid-Applied Astec Re-Ply Membrane 50 mils on all seams, flashings & penetrations 30 mils on all existing EPDM membrane

47. American Baptist

48. American Baptist Center-EPDM Savings Est. $600,000 over Replacement

49. Re-Ply ® vs. Replace Big savings… Avoids costly tear-off Cool Roof Energy Savings Sustainable Tax Benefits Helps the Planet Nice benefits…but not all roofs qualify

50. “ Cool Roof” Restoration Is a viable solution for some of your roof assets Now…Why Astec?

51. Why Astec? Quality Products & Systems… Products…Formulations Roof Evaluations Proper Specifications Knowledgeable Applicators

52. Product…Volume Solids (VS) Ratio of the Pigments to the Resin is PVC Lower PVC is better Higher the PVC the lower the quality High Quality Coating Pigments Resin Lower Quality Coating Pigments Resin

53. Why Astec? Cool Roof/Green Roof Benefits Surpasses all EPA, Energy Star and LEED Cool Roof guidelines. Reduces thermal shock and UV degradation Reduces Life Cycle Costs Minimizes landfill impact Saves energy…cooling costs Sustainable

54. Why Astec?

55. Why Astec?

56. Why Astec? Solves Roof Problems Fluid applied, premium elastomeric membranes. Results in seamless, wind and weather-tight roof. Long term sustainability eliminates roof replacement.

57. Why Astec? Experience and Credibility Hundreds of millions of sq. ft. applied Over 20 yrs. Perfecting fluid-applied systems and installation techniques Ten Year Renewable Warranty ISO 9001:2000 Registered Manufacturer Authorized contractors only…

58. Astec Re-Ply Fluid-Applied Cool Roofing The smart choice for “Qualified” roofing applications. Thank you for your time