The document provides instructions for constructing a building frame using wood beams and posts. It involves 6 steps: 1) Attach side beams to posts on one side of the building. 2) Attach a rear beam between the side beams. 3) Repeat step 1 on the other side. 4) Attach a front beam between the side beams. 5) Attach side frames to the sides of the building. 6) Attach front and back frames between the side frames.

1. = screw at angle –
connecting 2 pieces of wood
= Bolt – connecting 2 pieces of wood
= end piece of wood,
note 4x2,
The 4” side is vertical
The 2” side is horizontal
Rear
FRONT
STEP 1
Take one Side
Bottom of beam
x x
at top of metpost
2.1 mtrs

2. STEP 2
At REAR of building
1.05 mtr
x x
3.1 mtrs

3. = screw at angle –
connecting 2 pieces of wood
= Bolt – connecting 2 pieces of wood
= end piece of wood,
note 4x2,
The 4” side is vertical
The 2” side is horizontal
Rear
STEP 3 other side
Bottom of beam x x
at top of metpost
2.1 mtrs

4. STEP 4
At front of building
x x
4x4’s

5. = screw at angle –
connecting 2 pieces of wood
STEP 5 = Bolt – connecting 2 pieces of wood
At sides of building = end piece of wood,
note 4x2,
Do same for other side The 4” side is vertical
The 2” side is horizontal
Note top of beam 2.7 mtrs overall length
x 0.3 mtrs overhang
is at top of
the 4x4 posts
x
0.4 mtrs overhang
x x

6. 3.8 mtrs
0.4 mtrs overhang each side
x x x
Rear piece of wood
STEP 6
At front and back
of building
Do same for front
and back
x x
Note top of beam
is at bottom of the
side top beams

7. 3.8 mtrs
0.4 mtrs overhang each side
x x x
Rear piece of wood
STEP 6
At front and back
of building
Do same for front
and back
x x
Note top of beam
is at bottom of the
side top beams