Commercial - Industrial mechanical aspects
•Download as PPTX, PDF•
0 likes•133 views
This document provides information on various heating and cooling systems installed in commercial, industrial, and residential buildings in Greece between 2006 and 2016. It describes air to water heat pumps, ground source heat pumps, hybrid systems combining different renewable technologies, and a zero emissions nursing home. The largest project was the installation of all mechanical systems for a 35,000 square meter hotel.
Report
Share
Report
Share
Recommended
Hybrid hvac
The document describes 18 different residential and commercial buildings in Greece that utilize various combinations of heating systems including heat pumps, gas or oil boilers, solar thermal panels, and fireplace boilers. The systems are described along with their installation details such as installed capacity, heated area, year built, and building type. Locations include Korinthos, Kinetta, Thessaloniki, Paros Island, Alexandroupoli, and Chalkidiki. Heating system combinations include heat pumps paired with boilers, solar thermal, or both.
Hot air blaster
This piggery heating system can adjust temperature automatically with little fuel consumption. The heating area can be up to 1700㎡. Equipped with computer controller for heating time and heating temperature.
Presentation2
The document describes three scientific instruments:
1. A hot air oven with a temperature range of 50-250°C, double-walled aluminum/stainless steel interior, and heating elements along the bottom and sides.
2. An incubator with a temperature range of 37-70°C, double-walled construction, and heating elements along the bottom and sides.
3. A muffle furnace with a maximum working temperature of 900°C, ceramic fiber wool insulation, kanthal wire heating elements, and digital temperature control.
WA 0856 48 123438, Thermal oil Heater
Manufacture Thermal oil Boiler No 1 Di Indonesia
Alpha Omega
Jl. Urip sumoharjo No 8 Pandaan
Cp. Bp. Wahyu Hidaya
0856 48 1234 38
081234 38 58 544
Industrial Heating Appliances and Water Heaters by Kantilal Chunilal And Sons...
Industrial Heating Appliances and Water Heaters by Kantilal Chunilal And Sons...IndiaMART InterMESH Limited
Started to create milestones, we Kantilal Chunilal And Sons Appl. Pvt. Limited marked our presence in the year 1930 and operates in the manufacturing/servicing of S. S Tubes, Filter Cleaning Oven with Steam Super Heater, Recycling Gas Heaters, Reactivation Flange Heater, Air Heating Unit since 82 years. Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of S. S Tubes, Filter Cleaning Oven with Steam Super Heater, Recycling Gas Heaters, Reactivation Flange Heater, Air Heating Unit, Industrial Heaters that has made us to deepen our roots in the market. We Kantilal Chunilal And Sons Appl. Pvt. Limited breathe with the aim to satisfy our clients with our smart products/services. We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
Blauboxeen
Ventilation units for efficient supply ventilation in various premises.
Controllable air supply, heating and filtration.
Compatible with Ø100 up to 315 mm round air ducts.
Industrial Cooling Systems Construction Engineering Consulting
This document discusses industrial cooling systems, which are central to many manufacturing processes that generate heat. It describes different types of cooling systems including oil, water, and air systems. It also discusses various industrial cooling equipment like plate and tube heat exchangers, condensers, air radiators, and chillers that are used to cool manufacturing processes. Finally, it mentions cooling towers that can cool water for closed cycle cooling systems with capacities ranging from 300,000 to 30,000,000 Kcal.
Endüstriyel Soğutma Sistemleri / Industrial Cooling Solutions
Endüstriyel Soğutma Hesaplamaları ve Mühendislik Müşavirlik
Industrial Cooling Calculation and Engineering Services
BERR Industry
Recommended
Hybrid hvac
The document describes 18 different residential and commercial buildings in Greece that utilize various combinations of heating systems including heat pumps, gas or oil boilers, solar thermal panels, and fireplace boilers. The systems are described along with their installation details such as installed capacity, heated area, year built, and building type. Locations include Korinthos, Kinetta, Thessaloniki, Paros Island, Alexandroupoli, and Chalkidiki. Heating system combinations include heat pumps paired with boilers, solar thermal, or both.
Hot air blaster
This piggery heating system can adjust temperature automatically with little fuel consumption. The heating area can be up to 1700㎡. Equipped with computer controller for heating time and heating temperature.
Presentation2
The document describes three scientific instruments:
1. A hot air oven with a temperature range of 50-250°C, double-walled aluminum/stainless steel interior, and heating elements along the bottom and sides.
2. An incubator with a temperature range of 37-70°C, double-walled construction, and heating elements along the bottom and sides.
3. A muffle furnace with a maximum working temperature of 900°C, ceramic fiber wool insulation, kanthal wire heating elements, and digital temperature control.
WA 0856 48 123438, Thermal oil Heater
Manufacture Thermal oil Boiler No 1 Di Indonesia
Alpha Omega
Jl. Urip sumoharjo No 8 Pandaan
Cp. Bp. Wahyu Hidaya
0856 48 1234 38
081234 38 58 544
Industrial Heating Appliances and Water Heaters by Kantilal Chunilal And Sons...
Industrial Heating Appliances and Water Heaters by Kantilal Chunilal And Sons...IndiaMART InterMESH Limited
Started to create milestones, we Kantilal Chunilal And Sons Appl. Pvt. Limited marked our presence in the year 1930 and operates in the manufacturing/servicing of S. S Tubes, Filter Cleaning Oven with Steam Super Heater, Recycling Gas Heaters, Reactivation Flange Heater, Air Heating Unit since 82 years. Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of S. S Tubes, Filter Cleaning Oven with Steam Super Heater, Recycling Gas Heaters, Reactivation Flange Heater, Air Heating Unit, Industrial Heaters that has made us to deepen our roots in the market. We Kantilal Chunilal And Sons Appl. Pvt. Limited breathe with the aim to satisfy our clients with our smart products/services. We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
Blauboxeen
Ventilation units for efficient supply ventilation in various premises.
Controllable air supply, heating and filtration.
Compatible with Ø100 up to 315 mm round air ducts.
Industrial Cooling Systems Construction Engineering Consulting
This document discusses industrial cooling systems, which are central to many manufacturing processes that generate heat. It describes different types of cooling systems including oil, water, and air systems. It also discusses various industrial cooling equipment like plate and tube heat exchangers, condensers, air radiators, and chillers that are used to cool manufacturing processes. Finally, it mentions cooling towers that can cool water for closed cycle cooling systems with capacities ranging from 300,000 to 30,000,000 Kcal.
Endüstriyel Soğutma Sistemleri / Industrial Cooling Solutions
Endüstriyel Soğutma Hesaplamaları ve Mühendislik Müşavirlik
Industrial Cooling Calculation and Engineering Services
BERR Industry
Design of piping_systems_-_mw_kellogg
The document discusses the history of chocolate, describing how it originated from cacao trees native to Central and South America. It explains that the Olmec and Mayans cultivated cacao trees and used the beans to make a bitter drink. Later, the Aztecs developed chocolate into a staple food and the Spanish introduced it to Europe in the 16th century.
Commercial Building Services
Mechanical Piping Systems - today you will find Victaulic grooved mechanical systems used in a nearly endless number of piping applications all over the world. The grooved system has become synonymous with faster and easier installations..
By specifying and installing Victaulic systems, engineers, owners and installing contractors conserve time and financial resources through;
* Compressed construction schedules
* Lower total installed costs
* Safer work environment
* Reduced system downtime
Design to Construction; Estimating, 3D Modelling, BIM Coordination Package, Product Specification and Selection Services, Value Engineering - such as accommodating system thermal movement, vibration, noise, system flexibility, alignment ease etc....
Lean Construction & Prefabrication Concepts
Integrated Supply Chain - safer system Installations, Material Handling Bag & Tag Services, Coordinated Shipments and Inspection Services
Mind map the_9_key_elements_video_05_pre-commissioning
Pre-commissioning activities refer to tasks completed after construction but before commissioning to prepare systems for operation. They include cleaning, catalyst loading, dry runs, and checks of systems. Records of pre-commissioning tests and checklists are made to verify systems are ready for commissioning. Common pre-commissioning tasks involve flushing, blowing, drying, leak testing, lubrication, equipment run-ins, and filter/catalyst installation. The goal is to achieve a "Ready for Commissioning" milestone where systems are prepared to begin the commissioning process.
Clamp a type
Copper Alloy Casting,Copper Deep Drawn Pressed Components,Copper Pipe Saddles Copper Pipe Clips,Copper Pipe Saddles Clips,Copper Pressed Contacts Parts for Switchgears,Aluminium Laminated Flexible Shunts,Custom Copper and Brass pressed parts Components,Copper and Brass pressed parts Components,
Copper Electrical Fuse Contacts Parts,Copper Sheet Fuse Parts,Copper Pressed Brackets,Copper Pressed Brackets,Copper Pressed Contacts Terminals,Copper Pressed Contacts Terminals,Copper Gaskets,Solid Copper Busbars,Copper Bus Bars,Custom Copper Busbar Assemblies,
Copper Fabricated Busbars,Tin Plated Copper Bus Bars,Copper Circuit Breaker Busbars,Copper Insulated Busbars,Copper Threaded Busbars,Copper Rivets,Copper Welding Studs,Copper Nuts Bolts,Copper-Nuts-and-Bolts,Copper Cold Forged Machined Fasteners,
Forged Machined Fasteners,Copper Cold Formed Parts,Beryllium Copper Parts,Copper Screw Machine Components Parts,Screw Machine Components,Copper Electrical Components,DIN 9021 Copper washers,Copper Shims washers,Copper plain washers metric DIN 7349,
Welded steel pipe 10.10.07
This document provides an overview of the history and development of welded steel pipe. It discusses how advancements were made throughout the 20th century in steel pipe production through cold-forming machines and quality control improvements. The document outlines the key requirements for buried flexible pipe as strength, ease of installation, high flow capacity, leak resistance, long service life, reliability, versatility and economy. It notes that research organizations like STI/SPFA and the American Iron and Steel Institute have contributed to developments in steel pipe standards, testing and new materials.
Pipe Clamp Design, Application & Installation - November
This Webinar presentation includes pipe clamps, hold-down clamps, riser clamps and structural supports. Learn how the appropriate type of pipe support is chosen based on the different design conditions. Find out how Finite Element Analysis is used in the design process and view the custom pipe supports designed for extreme applications.
The Design Secrets of Slide Plates & Pipe Rollers Webinar
Discover the secret to a lower coefficient of friction while premitting translational motion or movement with the supporting element. Learn about the different types of slide plates and pipe rollers used for various applications. View the design, load capabilities, and installation and maintenance guidelines for both slide plates and pipe rollers. See numerous photos featuring combinations with other critical pipe supports in order to allow for movement or a low coefficient of friction.
Pipe Clamps Webinar
This Webinar presentation includes pipe clamps, hold-down clamps, riser clamps and structural supports. Learn how the appropriate type of pipe support is chosen based on the different design conditions. Find out how Finite Element Analysis is used in the design process and view the custom pipe supports designed for extreme applications.
Quality Management Plan
The Quality Management Plan outlines standards and metrics for the Operation PC Installation project. It includes pre-administered client surveys, hardware/software supplier selection, and customer satisfaction ratings standards. Key metrics are a 50% survey response rate, supplier evaluations, and user satisfaction ratings after installation. Problem reporting and corrective actions will have clear roles. Suppliers will be closely monitored and changes documented with sign-off. Quality metrics and checklists are provided to measure success.
Building Maintenance Solutions
Monarch's Cost Saving Solutions In Repair & Maintenance of aging assets and Protection & Improvement of new Assets in Mechanical, Electrical, Civil and Project Engineering Domains.
We are pleased to introduce our self as an ISO 9001 : 2008, ISO 14001:2004 & OHSAS 18001:2007 certified Company manufacturing complete range of construction and maintenance solutions. Monarch's technologically advanced Maintenance solutions assist to enhance your plants productivity / efficiency without any interruptions of down time and break downs. We have wide network of trained company engineers and dealers across the country to diagnose your maintenance problem and recommend solutions. You may contact us for on-line technical recommendation or find out your nearest Monarch Dealer.
Quality Assurance Plan
This quality assurance plan summarizes the success criteria for key vendors involved in the Smith/Doe wedding scheduled for August 21, 2010. Contracts with the reception venue, florist, bakery, videographer, photographer, limousine service, and disc jockey outline delivery times and product specifications to ensure the wedding and reception meet the family's expectations. The project priority is high to guarantee all vendor contracts are fulfilled as planned for the August wedding.
PMBOK 2008 Map of Processes
The document outlines the key project management processes based on the PMBOK 4th edition. It shows the initiation, planning, execution, monitoring and controlling, and closure processes. The initiation process involves developing the project charter and identifying stakeholders. The planning processes include developing the project management plan, estimating costs and durations, and defining the scope, schedule, budget, and risk management plan. The execution processes focus on project team management, communications, procurements, and quality assurance. The monitoring and controlling processes involve monitoring project work, reporting performance, controlling changes, and managing risks. Finally, the closure process wraps up project or phase activities and procurements.
Buildings Maintenance Issues
We see all kinds of problem when maintaining building. In many of cases we deal with the damp or moisture in the building due to climate changed. There are some maintenance issue which we face.
cswip-3-1-quiz
This document contains a 17 question multiple choice quiz on welding topics for a CSWIP 3.1 certification. The quiz covers questions on welding processes like MMA, TIG, and SAW; welding techniques like slope in; welding defects like arc blow and lamellar tearing; welding consumables; post-weld heat treatment; and non-destructive testing methods. It also lists 7 theory questions asked in a February 2007 CSWIP 3.1 exam related to welding inspector duties, electrode classifications, hard stamping limitations, TIG processes, hydrogen cracking causes, welding procedure tests, and lamellar tearing.
Engineering & Design of Pipe Supports
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P.
Welding iv
The welding procedure specification provides direction for welding production joints using the shielded metal arc welding (SMAW) process. It specifies welding double-V groove joints in ASTM SA 516 Grade 70 steel from 4.76 to 50 mm thick using 2.5, 3.15, or 4.0 mm diameter E7018 electrodes. Welding is done in all positions with a preheat of 150°C minimum for thicknesses over 19mm. The procedure qualifies for full penetration groove and fillet welds.
Building maintenance management in malaysia
This document discusses building maintenance management in Malaysia and proposes improvements. It summarizes that [1] current maintenance procedures do not clearly link needs with building performance from the users' perspective; [2] a building maintenance management system is needed based on value to optimize programs; and [3] buildings are assets whose value changes with the quality of maintenance invested. Suggestions include client-focused systems to plan, control, and implement maintenance activities aiming to enhance productivity and satisfaction.
PIPE SYSTEMS1
This document discusses different types of building sanitary drainage systems including two-pipe, one-pipe, and single stack systems. It provides details on each system as well as factors to consider when choosing a system, such as building height and fixture units. The document recommends a single stack or one-pipe system for Jaypee Greens buildings over 15 stories tall due to limited shaft space and modern materials/techniques available. Pipe sizes are determined based on the number of fixture units according to BIS standards.
Building Services
The document discusses various building services including HVAC, electrical, plumbing, and fire protection systems. HVAC systems regulate temperature and humidity through heating, cooling, ventilation and air conditioning. Electrical systems include wiring and fire alarms. Plumbing systems distribute water and remove waste. Fire protection involves passive firewalls and active detection/suppression systems like sprinklers.
Introduction to building services part 2
This document discusses various elements that influence building services system design, including moisture, heat, ventilation, lighting, and acoustics. It provides information on each element, such as defining moisture levels, heat transfer sources, ventilation system types, factors that influence lighting brightness, and types of artificial lighting. Various examples and exercises are also included, such as calculating air changes and the number of lights needed in a room.
More Related Content
Viewers also liked
Design of piping_systems_-_mw_kellogg
The document discusses the history of chocolate, describing how it originated from cacao trees native to Central and South America. It explains that the Olmec and Mayans cultivated cacao trees and used the beans to make a bitter drink. Later, the Aztecs developed chocolate into a staple food and the Spanish introduced it to Europe in the 16th century.
Commercial Building Services
Mechanical Piping Systems - today you will find Victaulic grooved mechanical systems used in a nearly endless number of piping applications all over the world. The grooved system has become synonymous with faster and easier installations..
By specifying and installing Victaulic systems, engineers, owners and installing contractors conserve time and financial resources through;
* Compressed construction schedules
* Lower total installed costs
* Safer work environment
* Reduced system downtime
Design to Construction; Estimating, 3D Modelling, BIM Coordination Package, Product Specification and Selection Services, Value Engineering - such as accommodating system thermal movement, vibration, noise, system flexibility, alignment ease etc....
Lean Construction & Prefabrication Concepts
Integrated Supply Chain - safer system Installations, Material Handling Bag & Tag Services, Coordinated Shipments and Inspection Services
Mind map the_9_key_elements_video_05_pre-commissioning
Pre-commissioning activities refer to tasks completed after construction but before commissioning to prepare systems for operation. They include cleaning, catalyst loading, dry runs, and checks of systems. Records of pre-commissioning tests and checklists are made to verify systems are ready for commissioning. Common pre-commissioning tasks involve flushing, blowing, drying, leak testing, lubrication, equipment run-ins, and filter/catalyst installation. The goal is to achieve a "Ready for Commissioning" milestone where systems are prepared to begin the commissioning process.
Clamp a type
Copper Alloy Casting,Copper Deep Drawn Pressed Components,Copper Pipe Saddles Copper Pipe Clips,Copper Pipe Saddles Clips,Copper Pressed Contacts Parts for Switchgears,Aluminium Laminated Flexible Shunts,Custom Copper and Brass pressed parts Components,Copper and Brass pressed parts Components,
Copper Electrical Fuse Contacts Parts,Copper Sheet Fuse Parts,Copper Pressed Brackets,Copper Pressed Brackets,Copper Pressed Contacts Terminals,Copper Pressed Contacts Terminals,Copper Gaskets,Solid Copper Busbars,Copper Bus Bars,Custom Copper Busbar Assemblies,
Copper Fabricated Busbars,Tin Plated Copper Bus Bars,Copper Circuit Breaker Busbars,Copper Insulated Busbars,Copper Threaded Busbars,Copper Rivets,Copper Welding Studs,Copper Nuts Bolts,Copper-Nuts-and-Bolts,Copper Cold Forged Machined Fasteners,
Forged Machined Fasteners,Copper Cold Formed Parts,Beryllium Copper Parts,Copper Screw Machine Components Parts,Screw Machine Components,Copper Electrical Components,DIN 9021 Copper washers,Copper Shims washers,Copper plain washers metric DIN 7349,
Welded steel pipe 10.10.07
This document provides an overview of the history and development of welded steel pipe. It discusses how advancements were made throughout the 20th century in steel pipe production through cold-forming machines and quality control improvements. The document outlines the key requirements for buried flexible pipe as strength, ease of installation, high flow capacity, leak resistance, long service life, reliability, versatility and economy. It notes that research organizations like STI/SPFA and the American Iron and Steel Institute have contributed to developments in steel pipe standards, testing and new materials.
Pipe Clamp Design, Application & Installation - November
This Webinar presentation includes pipe clamps, hold-down clamps, riser clamps and structural supports. Learn how the appropriate type of pipe support is chosen based on the different design conditions. Find out how Finite Element Analysis is used in the design process and view the custom pipe supports designed for extreme applications.
The Design Secrets of Slide Plates & Pipe Rollers Webinar
Discover the secret to a lower coefficient of friction while premitting translational motion or movement with the supporting element. Learn about the different types of slide plates and pipe rollers used for various applications. View the design, load capabilities, and installation and maintenance guidelines for both slide plates and pipe rollers. See numerous photos featuring combinations with other critical pipe supports in order to allow for movement or a low coefficient of friction.
Pipe Clamps Webinar
This Webinar presentation includes pipe clamps, hold-down clamps, riser clamps and structural supports. Learn how the appropriate type of pipe support is chosen based on the different design conditions. Find out how Finite Element Analysis is used in the design process and view the custom pipe supports designed for extreme applications.
Quality Management Plan
The Quality Management Plan outlines standards and metrics for the Operation PC Installation project. It includes pre-administered client surveys, hardware/software supplier selection, and customer satisfaction ratings standards. Key metrics are a 50% survey response rate, supplier evaluations, and user satisfaction ratings after installation. Problem reporting and corrective actions will have clear roles. Suppliers will be closely monitored and changes documented with sign-off. Quality metrics and checklists are provided to measure success.
Building Maintenance Solutions
Monarch's Cost Saving Solutions In Repair & Maintenance of aging assets and Protection & Improvement of new Assets in Mechanical, Electrical, Civil and Project Engineering Domains.
We are pleased to introduce our self as an ISO 9001 : 2008, ISO 14001:2004 & OHSAS 18001:2007 certified Company manufacturing complete range of construction and maintenance solutions. Monarch's technologically advanced Maintenance solutions assist to enhance your plants productivity / efficiency without any interruptions of down time and break downs. We have wide network of trained company engineers and dealers across the country to diagnose your maintenance problem and recommend solutions. You may contact us for on-line technical recommendation or find out your nearest Monarch Dealer.
Quality Assurance Plan
This quality assurance plan summarizes the success criteria for key vendors involved in the Smith/Doe wedding scheduled for August 21, 2010. Contracts with the reception venue, florist, bakery, videographer, photographer, limousine service, and disc jockey outline delivery times and product specifications to ensure the wedding and reception meet the family's expectations. The project priority is high to guarantee all vendor contracts are fulfilled as planned for the August wedding.
PMBOK 2008 Map of Processes
The document outlines the key project management processes based on the PMBOK 4th edition. It shows the initiation, planning, execution, monitoring and controlling, and closure processes. The initiation process involves developing the project charter and identifying stakeholders. The planning processes include developing the project management plan, estimating costs and durations, and defining the scope, schedule, budget, and risk management plan. The execution processes focus on project team management, communications, procurements, and quality assurance. The monitoring and controlling processes involve monitoring project work, reporting performance, controlling changes, and managing risks. Finally, the closure process wraps up project or phase activities and procurements.
Buildings Maintenance Issues
We see all kinds of problem when maintaining building. In many of cases we deal with the damp or moisture in the building due to climate changed. There are some maintenance issue which we face.
cswip-3-1-quiz
This document contains a 17 question multiple choice quiz on welding topics for a CSWIP 3.1 certification. The quiz covers questions on welding processes like MMA, TIG, and SAW; welding techniques like slope in; welding defects like arc blow and lamellar tearing; welding consumables; post-weld heat treatment; and non-destructive testing methods. It also lists 7 theory questions asked in a February 2007 CSWIP 3.1 exam related to welding inspector duties, electrode classifications, hard stamping limitations, TIG processes, hydrogen cracking causes, welding procedure tests, and lamellar tearing.
Engineering & Design of Pipe Supports
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P.
Welding iv
The welding procedure specification provides direction for welding production joints using the shielded metal arc welding (SMAW) process. It specifies welding double-V groove joints in ASTM SA 516 Grade 70 steel from 4.76 to 50 mm thick using 2.5, 3.15, or 4.0 mm diameter E7018 electrodes. Welding is done in all positions with a preheat of 150°C minimum for thicknesses over 19mm. The procedure qualifies for full penetration groove and fillet welds.
Building maintenance management in malaysia
This document discusses building maintenance management in Malaysia and proposes improvements. It summarizes that [1] current maintenance procedures do not clearly link needs with building performance from the users' perspective; [2] a building maintenance management system is needed based on value to optimize programs; and [3] buildings are assets whose value changes with the quality of maintenance invested. Suggestions include client-focused systems to plan, control, and implement maintenance activities aiming to enhance productivity and satisfaction.
PIPE SYSTEMS1
This document discusses different types of building sanitary drainage systems including two-pipe, one-pipe, and single stack systems. It provides details on each system as well as factors to consider when choosing a system, such as building height and fixture units. The document recommends a single stack or one-pipe system for Jaypee Greens buildings over 15 stories tall due to limited shaft space and modern materials/techniques available. Pipe sizes are determined based on the number of fixture units according to BIS standards.
Building Services
The document discusses various building services including HVAC, electrical, plumbing, and fire protection systems. HVAC systems regulate temperature and humidity through heating, cooling, ventilation and air conditioning. Electrical systems include wiring and fire alarms. Plumbing systems distribute water and remove waste. Fire protection involves passive firewalls and active detection/suppression systems like sprinklers.
Introduction to building services part 2
This document discusses various elements that influence building services system design, including moisture, heat, ventilation, lighting, and acoustics. It provides information on each element, such as defining moisture levels, heat transfer sources, ventilation system types, factors that influence lighting brightness, and types of artificial lighting. Various examples and exercises are also included, such as calculating air changes and the number of lights needed in a room.
Viewers also liked (20)
Mind map the_9_key_elements_video_05_pre-commissioning
Mind map the_9_key_elements_video_05_pre-commissioning
Pipe Clamp Design, Application & Installation - November
Pipe Clamp Design, Application & Installation - November
The Design Secrets of Slide Plates & Pipe Rollers Webinar
The Design Secrets of Slide Plates & Pipe Rollers Webinar
Recently uploaded
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Recently uploaded (20)
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Data Control Language.pptx Data Control Language.pptx
Data Control Language.pptx Data Control Language.pptx
Commercial - Industrial mechanical aspects
- 2. Air to water heat pumps Heat pump installed capacity: 350kw Underfloor heating cooling area: 3.560 sq.m. Year of construction: 2008 Commercial building “Silver”, Thessaloniki Greece – Air to water heat pumps
- 3. Vertical ground heat exchanger: Heat pump installed capacity: 50 kw Underfloor heating-cooling area: 560 sq.m. Year of contruction: 2006 Commercial building, Thessaloniki Greece – ground source heat pump
- 4. Industrial building, Thessaloniki Greece - Air to water heat pump Air to water heat pump Heat pump installed capacity: 70kw Underfloor heating cooling area: 690 sq.m. Year of construction: 2009
- 5. Industrial building “Biston”, Thessaloniki Greece – Hybrid heating and cooling system Air-to-water heat pumps, solar thermal and a net-metering PV system Distribution systems: Fancoil units Year of construction: 2013
- 6. Hybrid heating and cooling system, combining geothermal with air-to-water heat pumps, solar heating and a net-metering PV system Distribution systems: Underfloor heating - cooling 3.500 sq.m. and fancoil units Year of construction: 2014-2015 Nursing Home, Serres Greece – Zero CO2 emissions building
- 7. Miraggio Hotel, Chalkidiki Greece - All mechanical aspects Installation of all equipment, mechanical, piping, plumbing, fire protection, HVAC, for a total covering area of 35.000 sq.m. Year of construction: 2015-2016