CMP BW32 LSF Brass Cable Gland (Zero Halogen) 26.2-34.4mm

•

0 likes•188 views

BW Industrial Brass Indoor Cable Glands for Low Voltage Cable Termination XLPE SWA CMP BW32 LSF Brass Cable Gland (Zero Halogen) - 26.2-34.4mm CMP Solo BW brass indoor LSF cable glands terminate all types of low smoke and fume cables with steel wire armour (SWA) - CMP Solo BW cable gland kits include LSF (Low Smoke & Fume) Halogen Free shrouds and seals. CMP Solo BW LSF cable glands provide mechanical retention and electrical continuity via wire armour termination. CMP BW brass cable glands are suitable for use with all steel wire armoured (SWA) cables within dry indoor environments with metric male threads rated at IP54 - GOST, Lloyds, ABS and London Underground Approved cable glands. LSF Cable Gland Terminations & BS6724 Power Cable - Copper conductors, XLPE insulation, steel wire armour (SWA) with black Low Smoke Zero Halogen (LS0H) outer cable sheath. BS6724 is specified for the supply of low voltage (LV) mains electricity to power networks, underground cable systems (direct burial) and in cable ducting – suitable for both indoor and outdoor use. BS6724 Low Smoke Zero Halogen (LS0H) SWA Cable is frequently supplied to projects in public areas where fire, smoke emissions and toxic fumes could potentially threaten both lives and equipment. When exposed to fire, the LS0H cable sheath emits very low levels of smoke and non-toxic levels of halogen gas (typically under 0.5% HCl emission.

Technology

CABLE GLAND AND CABLE CONNECTION SPECIALISTS

CMP SOLO - LOW SMOKE & FUME - HALOGEN FREE PRODUCTS

CMP

BW SOLO LSF Industrial Cable Gland Kit
TM

Brass indoor cable gland kit for all types of SWA cable, providing mechanical cable
retention, and electrical continuity via armour wire termination. The cable gland kit
includes CMP SOLO LSF Shrouds.
TECHNICAL DATA
Type

BW SOLO-Kit
Up to & including size 25 - 2 cable glands, 2 locknuts,
2 earth tags & 2 LSF shrouds.
Size 32 & above - 1 cable gland, 1 locknut, 1 earth tag
& 1 LSF shroud.

Cable Gland
Kit Contents
Design Specification

BS6121 : 2005

Cable Gland Material

Brass

Continuous Operating
Temperature

-60º C to +150º C

Cable Type

Single Wire Armour

Armour Clamping

Two Part Armour Lock

For Dimension Drawing See Page 77

CW SOLO LSF Industrial Cable Gland Kit
Brass indoor and outdoor cable gland git for all types of SWA cable, providing
environmental seal on the cable outer sheath. The cable gland also provides
mechanical cable retention, and electrical continuity via armour wire termination. The
cable gland kit includes CMP SOLO LSF shrouds and seals.

TM

TECHNICAL DATA
Type

CW SOLO-Kit
Up to & including size 25 - 2 cable glands, 2 locknuts,
2 earth tags & 2 LSF shrouds.
Size 32 & above - 1 cable gland, 1 locknut, 1 earth tag
& 1 LSF shroud.

Cable Gland
Kit Contents
Design Specification

BS6121 : Part 1 : 1989, EN50262:1999

Cable Gland Material

Brass

Continuous Operating
Temperature

-60º C to +150º C

Cable Type

Single Wire Armour

Armour Clamping

Detachable Armour Cone & AnyWay Universal Clamping Ring

For Dimension Drawing See Page 80

Note : Ferrule colour coded gold for ease of LSF identification.

Cable Gland Selection Table
BW SOLO
Cable Metric Minimum
Gland Entry
Thread
Size Thread Length

CW SOLO

Cable
Bedding
Diameter
Max.

Overall
Cable
Diameter
Max.

Ordering
Reference

LSF
Shroud
Reference

Cable
Bedding
Diameter
Max.-

Overall Cable
Diameter

Ordering
Reference

LSF
Armour
Shroud
Wire
Ref. Diameter

Min

Max

20S/16

M20

15.0

-

-

-

-

8.7

6.1

11.5

20S16CWLSF2RA

LSF02

0.9

20S

M20

10.0

11.7

16.1

20SBWLSF2RA

LSF01

11.7

9.5

15.9

20SCWLSF2RA

LSF04

0.9/1.25

20

M20

10.0

14.0

21.1

20BWLSF2RA

LSF05

14.0

12.5

20.9

20CWLSF2RA

LSF06

0.9/1.25

25

M25

10.0

20.0

27.4

25BWLSF2RA

LSF07

20.0

18.2

26.2

25CWLSF2RA

LSF09

1.25/1.6

32

M32

10.0

26.3

34.4

32BWLSF2RA

LSF10

26.3

23.7

33.9

32CWLSF2RA

LSF11

1.6/2.0

40

M40

15.0

26.3

42.4

40BWLSF2RA

LSF12

32.2

27.9

40.4

40CWLSF2RA

LSF15

1.6/2.0

50S

M50

15.0

38.2

50.1

50SBWLSF2RA

LSF16

38.2

35.2

46.7

50SCWLSF2RA

LSF18

2.0/2.5

50

M50

15.0

44.1

55.7

50BWLSF2RA

LSF19

44.1

40.4

53.1

50CWLSF2RA

LSF21

2.0/2.5

63S

M63

15.0

50.0

62.4

63SBWLSF2RA

LSF22

50.0

45.6

59.4

63SCWLSF2RA

LSF23

2.5

63

M63

15.0

56.0

68.2

63BWLSF2RA

LSF24

56.0

54.6

65.9

63CWLSF2RA

LSF25

2.5

75S

M75

15.0

62.0

76.8

75SBWLSF2RA

LSF27

62.0

59.0

72.1

75SCWLSF2RA

LSF28

2.5

75

M75

15.0

68.0

82.9

75BWLSF2RA

LSF29

68.0

66.7

78.5

75CWLSF2RA

LSF30

2.5/3.15

All dimensions in millimetres

97

www.cmp-products.com

The document provides information on cable gland kits for sealing and retaining armored and unarmored cables. It describes the E1W SOLO LSF kit for armored cables which provides environmental sealing and mechanical retention via an armor wire termination. It also describes the A2 SOLO LSF kit for unarmored cables which provides sealing of the cable outer sheath. Both kits include shrouds and seals and provide specifications on materials, temperature ratings, and cable types and sizes supported. Dimension drawings and ordering information is also included.

Nelson QLT Heat Tracing Cable - Spec Sheet

Thorne & Derrick UK

CMP BW LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero ...

Thorne & Derrick International

This document provides information on cable gland and cable connection products from CMP, including two types of cable gland kits: the BW SOLO kit for indoor use and the CW SOLO kit for indoor and outdoor use. Both kits provide mechanical cable retention and electrical continuity for single wire armour cables. They include cable glands, locknuts, tags, and CMP SOLO LSF shrouds or seals. Technical data is provided on material, temperature range, cable types, and dimensions. A cable gland selection table lists available gland sizes and references.

Hawke CSB 656N Hazardous Area Cable Gland

Thorne & Derrick International

BW Brass Cable Glands - BICC, BICON, Prysmian

Thorne & Derrick International

This document provides information about BW Brass Gland Kits for securing armored cables. The kits contain brass glands, earth tags, locknuts, and PVC shrouds for retaining and providing electrical continuity for armored cables. The kits are suitable for indoor use with galvanized steel cabled between 11.6mm to 67.9mm in diameter. The kits are made from brass alloy for strength and performance in temperatures ranging from -20°C to +90°C.

Fire Protection & Emergency System Junction Boxes & Electrical Enclosures

Thorne & Derrick UK

The document describes WKE terminal boxes for industrial and emergency systems offering up to 90 minutes of fire protection and IP54 ingress protection. It lists several WKE terminal box models ranging from 2 to 5 poles made of high temperature ceramic or thermoset plastic materials and providing flame protection classes E30 to E90 according to DIN 4102 standards. Additional WKE terminal box models for public facilities are described offering up to IP66 ingress protection, 30 minutes flame protection, and halogen-free thermosetting plastic construction. Contact information is provided for Thorne and Derrick UK.

Hazardous Area Lighting, Plugs & Sockets, Control Stations & Junction Boxes |...

Thorne & Derrick International

The document provides information on electrical equipment selection for explosive atmospheres caused by gases and dusts. It lists common industrial applications that can create explosive gas or dust hazards, including food processing, woodworking, metalworking, plastics processing, petrochemicals, and more. The document then provides product recommendations from Appleton for lighting, sockets, plugs, switches, and junction boxes that meet certification for use in zones with gas or dust hazards. Product lines are listed for explosionproof, flameproof, and increased safety protection types suitable for different hazard zones.

Datwyler universal safety fire fiber cabel info tech middle east

Ali Shoaee

Datwyler Universal Fiber Optic Fire Safety cable E30 - 30 minutes System Circuit Integrity .. Metal-free, water resistant, rodent protection, in accordance with IEC 60332.1 and IEC 60332.3 C 30 minutes System Circuit Integrity according to DIN 4102-12 Application : Safety applications in tunnels, underground railways, banks, insurance companies, large-scale industry , Public Area , Mall , Towers . Fiber optic LAN backbone. Indoor and outdoor cabling. Can be installed in cable platforms, trays, ducts and vertical shafts. Can be spliced in FO distributors. Zero halogen, no corrosive gases : IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2 Flame propagation: IEC 60332-1/-2, EN 60332-1-2, VDE 0482-332-1-2 Flame spread: IEC 60332.3 C, EN 50266-2-4, VDE 0482-266-2-4 Smoke density: IEC 61034-1/-2, EN 61034-1/-2 (EN 50268-1/-2), VDE 0482-1034-1/-2 (VDE 0482-268-1/-2) Circuit Integrity (FE180): IEC 60331-11, IEC 60331-25, VDE 0472 part 814, EN 50200 PH 90, EN 50362, VDE 0482-200, VDE 0482-362: System circuit integrity according to DIN 4102 part 12, VKF Fire Safety Application No. 24176 Please Contact Info Tech Middle East for more Detail : Info@InfoTechME.ws

Prysmian (BICON) Cable Glands for FP Cables Prysmian (BICON) cable gland kits are suitable for glanding and terminating the Prysmian FP Fire Resistant and Fire Performance range of cables - this includes Prysmian (BICON) cable glands kits for FP100, FP200, FP400, FP600, FP600 Plus and FP Plus fire resistant cables. T&D UK distribute the complete range of Prysmian (BICON) cable gland kits including Industrial BICON Cable Glands (A2, BW, CW, E1W), Hazardous Area Flameproof BICON Cable Glands (E1FW), Barrier BICON Cable Glands and High Voltage BICON Cable Glands. Prysmian BICON FP Cable Gland Kits - Overview : • Prysmian CW BICON Cable Gland Kits LSF LSOH (Indoor Outdoor) - For Steel Wire Armoured Cable - Prysmian FP600S Cables • Prysmian Brass BICON Cable Gland Kits (Indoor Outdoor) - For Steel Wire Armoured Cables - Prysmian FP600 Cables • Prysmian Plastic BICON Cable Gland Kits - Prysmian FP100, FP200 Gold and FP Plus Cables • Prysmian E1W LSF BICON Cable Gland Kits - Prysmian FP400 Cables

Sommer cable catalogue section 3

Aryan Subedi

This document provides information about ready-made cables for potential equalization systems, studio applications, and general power supplies. It includes descriptions of connection boxes and cables for potential equalization systems that combine robust connectors with star wiring distribution boards. Studio microphone cables are detailed that offer shielding and accurate audio transmission. Finally, power strips are listed that provide reliable power for devices through sound contacts and surge protection.

Yamuna Infra & Technology Pvt. Ltd. is a leading manufacturer of Heat Shrinka...

Yamuna Infra & Technology Pvt. Ltd.

Yamuna Infra & Technology Pvt. Ltd. is an India based leading manufacturer and exporter of high-quality heat shrinkable power cable jointing kits, heat shrinkable power cable termination kits and power cable accessories upto 36kV. Established in 1996, we have been supplying many of the leading power and telecom industries all over the world. We manufacture and market our products under 'US-SEAL' brand/trademark, which itself speak about million acknowledgements for their performance. We are one of the leading companies focused on manufacturing high-quality heat shrinkable moulded components such as cable breakout boots, cable end sealing caps and other electric cable accessories. For more information visit www.yamunainfra.com

3M Earthing Kits & Constant Force Springs | AKBAR TRADING EST. - mail@akbart...

AKBAR TRADING

This document provides information on various earthing kits and accessories from 3M for establishing electrical continuity and grounding across cable joints. It describes 10 different Armour Continuity Kits from 3M that are used for inline, tee, or branch configurations on armored power cables. It also lists constant force springs, earth bonding kits, electrical shielding and grounding braid tapes, copper braid, and tools that can be used for bonding armor wires and providing an electrical connection or fault current path for cable joints and terminations.

RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...

AKBAR TRADING

te connectivity saudi arabia TYCO TERMINATION KIT IN ALL VOLTAGE Raychem terminations for polymeric and MIND paper insulated cables from 7.2 kV up to 36 kV System Designer 케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易 ชุด การเลิกจ้าง RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) 11kV-33kV Medium Voltage Heat Shrink Cable Joints & Cable Terminations 11kV and 33kV heat shrink cable joints and cable terminations for medium voltage power cables - SPS heat shrink cable joints and cable terminations are suitable for installation at indoors and outdoors in the Middle East countries, this includes salt laden and dusty atmospheres associated with the Middle East oil, gas and petrochemical industries. Cable terminations and cable joints are suitable for XLPE and paper insulated single core and three 3 core cables of 11kV and 33kV voltages, 3 phase, 50HZ type electrical systems with highest system voltages of 12kV and 36kV. Cable joints are suitable for connecting two XLPE insulated cables of same size or dissimilar sizes and for transition between XLPE and paper insulated lead covered (PILC) medium voltage cables.

RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) Raychem terminations for polymer...

AKBAR TRADING

EPKT- 17C3MOH3 B21 G43 36for 36 kVSize in mm27.2 kV 12 kV & 17.5 kV 24 kV 36 kVA 16 - 50 16 - 25 - -B 70 - 120 35 - 70 25 - 50 -C 150 - 240 95 - 240 70 - 185 50 - 95D300 - 500 300 - 400 240 - 300 120 - 185E630 - 1000 500 - 800 400 - 630 240 - 500F - 1000 800 - 1000 630 - 1000No. of Cores1 for single (1) core3for three (3) coreDielectric of insulation typeX for PLASTIC eg. XLPE, EPDM, EPR, etc.M for MIND non-draining paper (not applicable for draining paper cables)Location of the terminationI for INDOORO for OUTDOORLength (only 3-core) of the terminated portion (tail)H1 for 450 mm longH2for 650 mm long (min for 17.5 kV outdoor & 36 kV indoor)H3for 800 mm long (min for 24 kV outdoor & 36 kV outdoor)H4for 1200 mm long 12 - 18 16 - 50 16 - 50 16 - 25 - - EAKT 1655 G 55

Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...

Thorne & Derrick International

This document is a catalogue from Nexans Network Solutions Division Euromold. It provides information on various cable accessories produced by Euromold including separable connectors, bushings, and plugs. The document includes specifications, standards, and ordering information for product items like the 158LR elbow connector, 152SR straight connector, and 151SP straight plug. It also provides diagrams to illustrate the products and their applications for connecting cable to equipment or other cables.

Electrician club with cables

Pramod Wattegedara

This document describes various electrical products manufactured by Orange Cables including indoor cables, unarmoured power cables, switchgear cables, data cables, auto cables, coaxial cables, circuit breakers, residual current circuit breakers, industrial switchgears, socket outlets, LED and CFL lighting, and industrial panel boards. The key materials used include flame retardant polycarbonate and nylon, high grade brass, phosphor bronze, and high quality silver alloy. Products meet various international standards.

Earth Bonding Kits - 3M

Thorne & Derrick International

This document describes various earthing kits and accessories for providing electrical continuity and bonding across cable joints. It discusses 3M's AC series armour continuity kits which contain contact rings and steel bands for inline, tee, or branch cable configurations. It also mentions constant force springs, earth bonding kits, copper braid, and shielding/grounding tape that can be used for bonding cable armour wires and providing a fault current path. Sizes and applications are provided for each product.

Nexans Euromold Interface A 200 Series Screened Cable Connectors

Thorne & Derrick International

This document is a catalogue from Nexans Network Solutions Div. Euromold that provides information on cable accessories. It describes various prefabricated cable accessories that Euromold manufactures for medium voltage energy distribution, including premoulded EPDM rubber connectors for cables and epoxy bushings. It provides details on Euromold's ISO 9001 and laboratory accreditation certification. The document also includes specifications for separable connectors like the 158LR elbow connector and 152SR straight connector that are designed to connect cables to equipment up to 24kV and 250A. It provides ordering information and diagrams for these connectors.

Nexans Euromold MV Separable Connectors & Bushings - Interface A

Thorne & Derrick International

Nexans Euromold Interface C 400 Symmetrical Series Cable Connectors

Thorne & Derrick International

This document provides information on Euromold's medium voltage symmetrical separable connectors, including the Interface C connectors. It describes the 400LB elbow connector, 400TB and 440TB tee connectors, their design, specifications, standards, kit contents and ordering instructions. Euromold is a leading European manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution.

Nexans Euromold MV Separable Connectors & Bushings - Interface C Symmetrical

Thorne & Derrick International

CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...

Thorne & Derrick International

High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (Supply) CMP A324 Zen insulated aluminium cable glands are suitable for the cable termination of all low voltage and high voltage aluminium wire armoured (AWA) cables, indoor and outdoor with IP66 seal - CMP A324 Zen insulated aluminium cable glands feature CMP Cast Integral Earth Lug (CIEL) allowing the zoning of earth connections for earthed neutral systems. CMP Zen Insulated Cable Glands - High Voltage Cable Termination with Brass or Aluminium Cable Glands In the power generation industry unless special measures are taken to both segregate LV-HV cables in accordance with wiring regulations, and also isolate the metallic cable armour from running in continuous contact throughout the whole of the earthing system, interference or electrical noise would spread throughout the plant. CMP Zen Insulated cable gland system allows cables to be earthed at one end only - single point earthing - and insulated at the field end. Insulated Zen cable glands are available to ensure that no contact is made between the earth circuit carried through the cable armour and the low-high voltage electrical enclosure which the cable enters. CMP Zen Insulated cable glands permit electrical design engineers to implement safe earthing systems to deal with : *Cross Talk Noise Reduction *Electrical Separation of Main Earths *Earth Fault Segregation *Fault Current Reduction with Series Cable Resistance *Electrical Noise Reduction in Instrument Cables *Circulating Current Production in Single or 3 Core High Voltage Cables CMP Zen Insulated Cable Glands - CMP A324 & A348 CMP Zen Insulated cable glands are suitable for use with all aluminium wire armoured (AWA) cables providing an IP66 environmental seal on the cable outer sheath. CMP A324 Zen glands feature Cast Integral Earth Lug (CIEL) suitable for high voltage power cable systems where a high level of protection against fault currents is required - CMP's unique cable glanding concept effectively insulates the gland and cable armour from the electrical equipment eliminating circulating currents. CMP Zen A324 cable gland is usually installed at the supply end of the cable and Zen A348 cable gland at the load end - suitable for 3.3kV, 6.6kV, 11kV and 33kV single core AWA high voltage power cable glanding.

Pearl broucher

PEARL INTERNATIONAL

This document provides information on various types of brass cable glands and fittings produced by The Pearl International, including: - Type A1/A2 cable glands that provide IP66 protection and single displacement sealing for unarmored cables - BW cable glands for armored cables that provide mechanical retention and electrical continuity via a three-part armor lock - Double compression glands that provide IP66 protection and seal both the inner and outer sheaths of steel wire armored cables - Specifications, materials, sizes, temperature ratings, and accessories are provided for each type.

3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...

Thorne & Derrick International

This document provides information on various earthing kits and components for electrical joints and terminations. It describes 3M armour continuity kits that provide electrical continuity across cable joints, along with accepted cable diameters and copper cord lengths. It also lists constant force springs, earth bonding kits, electrical shielding and grounding braids, and copper braid options for providing earth continuity and fault current paths. Technical support contact information is provided at the end.

3M Constant Force Springs - 3M Scotch Electrical Tapes

Thorne & Derrick International

This document provides information on various earthing kits and components for electrical joints and terminations. It describes 3M armour continuity kits (AC kits) that provide electrical continuity across cable joints for armoured cables. It also lists constant force springs, earth bonding kits, copper braid, and electrical shielding braid that can be used for bonding armour wires and providing fault current paths and shielding. Technical support contact information is provided at the end.

3M Earth Bonding Kits SB 1 - SB4 - 3M Electrical Shielding, Grounding & Earth...

Thorne & Derrick International

3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...

Thorne & Derrick International

Prysmian BICC BICON Cable Glands - Catalogue

Thorne & Derrick International

This document provides an introduction and overview of Bicon cable glands manufactured by Prysmian Group. It discusses the company's extensive experience in producing cable glands and accessories and its comprehensive product ranges for both industrial and hazardous applications. The document includes sections on low smoke zero halogen materials, deluge testing, ingress protection indexing, and guides for selecting the appropriate industrial or hazardous area cable gland.

Isolation procedures for safe working on electrical systems and equipment by ...

Thorne & Derrick International

Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment. You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically. THE RULES OF SAFE ISOLATION ARE: Obtain permission to start work (a Permit may be required in some situations) Identify the source(s) of supply using an approved voltage indicator or test lamp Prove that the approved voltage indicator or test lamp is functioning correctly Isolate the supply(s) Secure the isolation Prove the system/equipment is DEAD using an approved voltage indicator or test lamp Prove that the approved voltage indicator or test lamp is functioning correctly Put up warning signs to tell other people that the electrical installation has been isolated Once the system/equipment is proved DEAD, work can begin Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.

THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt

Thorne & Derrick International

Similar to CMP BW32 LSF Brass Cable Gland (Zero Halogen) 26.2-34.4mm

Prysmian (BICON) Cable Glands for FP Cables - FP200, FP Plus, FP400, FP600 an...

Thorne & Derrick International

Sommer cable catalogue section 3

Aryan Subedi

Yamuna Infra & Technology Pvt. Ltd. is a leading manufacturer of Heat Shrinka...

Yamuna Infra & Technology Pvt. Ltd.

3M Earthing Kits & Constant Force Springs | AKBAR TRADING EST. - mail@akbart...

AKBAR TRADING

RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...

AKBAR TRADING

RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) Raychem terminations for polymer...

AKBAR TRADING

Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...

Thorne & Derrick International

Electrician club with cables

Pramod Wattegedara

Earth Bonding Kits - 3M

Thorne & Derrick International

Nexans Euromold Interface A 200 Series Screened Cable Connectors

Thorne & Derrick International

Nexans Euromold MV Separable Connectors & Bushings - Interface A

Thorne & Derrick International

Nexans Euromold Interface C 400 Symmetrical Series Cable Connectors

Thorne & Derrick International

Nexans Euromold MV Separable Connectors & Bushings - Interface C Symmetrical

Thorne & Derrick International

CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...

Thorne & Derrick International

Pearl broucher

PEARL INTERNATIONAL

3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...

Thorne & Derrick International

3M Constant Force Springs - 3M Scotch Electrical Tapes

Thorne & Derrick International

3M Earth Bonding Kits SB 1 - SB4 - 3M Electrical Shielding, Grounding & Earth...

Thorne & Derrick International

3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...

Thorne & Derrick International

Prysmian BICC BICON Cable Glands - Catalogue

Thorne & Derrick International

Similar to CMP BW32 LSF Brass Cable Gland (Zero Halogen) 26.2-34.4mm (20)

Prysmian (BICON) Cable Glands for FP Cables - FP200, FP Plus, FP400, FP600 an...

Sommer cable catalogue section 3

Yamuna Infra & Technology Pvt. Ltd. is a leading manufacturer of Heat Shrinka...

3M Earthing Kits & Constant Force Springs | AKBAR TRADING EST. - mail@akbart...

RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...

RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) Raychem terminations for polymer...

Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...

Electrician club with cables

Earth Bonding Kits - 3M

Nexans Euromold Interface A 200 Series Screened Cable Connectors

Nexans Euromold MV Separable Connectors & Bushings - Interface A

Nexans Euromold Interface C 400 Symmetrical Series Cable Connectors

Nexans Euromold MV Separable Connectors & Bushings - Interface C Symmetrical

CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...

Pearl broucher

3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...

3M Constant Force Springs - 3M Scotch Electrical Tapes

3M Earth Bonding Kits SB 1 - SB4 - 3M Electrical Shielding, Grounding & Earth...

3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...

Prysmian BICC BICON Cable Glands - Catalogue

More from Thorne & Derrick International

Isolation procedures for safe working on electrical systems and equipment by ...

Thorne & Derrick International

THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt

Thorne & Derrick International

The Children North East Annual Golf Day Wednesday 9th May 2018

Thorne & Derrick International

The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.

3M Electrical Products Stocked By Thorne & Derrick International

Thorne & Derrick International

This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.

CATU Electrical Safety Catalogue

Thorne & Derrick International

This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products

11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A

Thorne & Derrick International

1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds. 2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii. 3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.

THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...

Thorne & Derrick International

THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment. Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST. Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.

Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...

Thorne & Derrick International

The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.

Roxtec Cable Transit - B Frame Dimensional Drawing

Thorne & Derrick International

Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe

Thorne & Derrick International

T&D Experts In Equipment For Explosive Atmospheres

Thorne & Derrick International

Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.

Ultrasonic Flow Meters - Customer Specification Demand

Thorne & Derrick International

This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.

Emtelle Fibre Optic Cables - Product Catalogue 2016

Thorne & Derrick International

This document provides information on Emtelle fibre optic cables, including: - An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions. - Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more. - Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.

Thorne & Derrick Process Heating Brochure 2016

Thorne & Derrick International

Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.

SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D

Thorne & Derrick International

Ripley Utility Tool Cable Preparation Tools

Thorne & Derrick International

The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.

RIDGID micro CD100 Combustible Gas Detector

Thorne & Derrick International

The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.

Itron Fact Sheet

Thorne & Derrick International

Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.

United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...

Thorne & Derrick International

Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet

Thorne & Derrick International

The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.

More from Thorne & Derrick International (20)

Isolation procedures for safe working on electrical systems and equipment by ...

THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt

The Children North East Annual Golf Day Wednesday 9th May 2018

3M Electrical Products Stocked By Thorne & Derrick International

CATU Electrical Safety Catalogue

11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A

THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...

Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...

Roxtec Cable Transit - B Frame Dimensional Drawing

Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe

T&D Experts In Equipment For Explosive Atmospheres

Ultrasonic Flow Meters - Customer Specification Demand

Emtelle Fibre Optic Cables - Product Catalogue 2016

Thorne & Derrick Process Heating Brochure 2016

SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D

Ripley Utility Tool Cable Preparation Tools

RIDGID micro CD100 Combustible Gas Detector

Itron Fact Sheet

United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...

Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet

Recently uploaded

How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf

Chart Kalyan

Generating privacy-protected synthetic data using Secludy and Milvus

Zilliz

During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.

Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...

saastr

Public CyberSecurity Awareness Presentation 2024.pptx

marufrahmanstratejm

Nordic Marketo Engage User Group_June 13_ 2024.pptx

MichaelKnudsen27

TrustArc Webinar - 2024 Global Privacy Survey

TrustArc

How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024? In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores. See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe. This webinar will review: - The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey - The top challenges for privacy leaders, practitioners, and organizations in 2024 - Key themes to consider in developing and maintaining your privacy program

HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU

panagenda

Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/ DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen! Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell. Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten. Diese Themen werden behandelt - Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten - Wie funktionieren CCB- und CCX-Lizenzen wirklich? - Verstehen des DLAU-Tools und wie man es am besten nutzt - Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw. - Praxisbeispiele und Best Practices zum sofortigen Umsetzen

Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...

saastr

leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...

alexjohnson7307

Main news related to the CCS TSI 2023 (2023/1695)

Jakub Marek

An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers. The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 . The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .

Best 20 SEO Techniques To Improve Website Visibility In SERP

Pixlogix Infotech

Astute Business Solutions | Oracle Cloud Partner |

AstuteBusiness

Presentation of the OECD Artificial Intelligence Review of Germany

innovationoecd

Azure API Management to expose backend services securely

Dinusha Kumarasiri

Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe

Precisely

Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market. Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.

dbms calicut university B. sc Cs 4th sem.pdf

Shinana2

Introduction of Cybersecurity with OSS at Code Europe 2024

Hiroshi SHIBATA

I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems. The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS. Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application. I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.

AWS Cloud Cost Optimization Presentation.pptx

HarisZaheer8

This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.

Monitoring and Managing Anomaly Detection on OpenShift.pdf

Tosin Akinosho

Monitoring and Managing Anomaly Detection on OpenShift Overview Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices. Key Topics Covered 1. Introduction to Anomaly Detection - Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems. 2. Understanding Edge (IoT) - Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source. 3. What is ArgoCD? - Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices. 4. Deployment Using ArgoCD for Edge Devices - Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD. 5. Introduction to Apache Kafka and S3 - Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions. 6. Viewing Kafka Messages in the Data Lake - Learn how to view and analyze Kafka messages stored in a data lake for better insights. 7. What is Prometheus? - Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices. 8. Monitoring Application Metrics with Prometheus - Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system. 9. What is Camel K? - Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes. 10. Configuring Camel K Integrations for Data Pipelines - Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow. 11. What is a Jupyter Notebook? - Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text. 12. Jupyter Notebooks with Code Examples - Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.

Columbus Data & Analytics Wednesdays - June 2024

Jason Packer

Recently uploaded (20)

How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf

Generating privacy-protected synthetic data using Secludy and Milvus

Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...

Public CyberSecurity Awareness Presentation 2024.pptx

Nordic Marketo Engage User Group_June 13_ 2024.pptx

TrustArc Webinar - 2024 Global Privacy Survey

HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU

Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...

leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...

Main news related to the CCS TSI 2023 (2023/1695)

Best 20 SEO Techniques To Improve Website Visibility In SERP

Astute Business Solutions | Oracle Cloud Partner |

Presentation of the OECD Artificial Intelligence Review of Germany

Azure API Management to expose backend services securely

Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe

dbms calicut university B. sc Cs 4th sem.pdf

Introduction of Cybersecurity with OSS at Code Europe 2024

AWS Cloud Cost Optimization Presentation.pptx

Monitoring and Managing Anomaly Detection on OpenShift.pdf

Columbus Data & Analytics Wednesdays - June 2024

CMP BW32 LSF Brass Cable Gland (Zero Halogen) 26.2-34.4mm

1. CABLE GLAND AND CABLE CONNECTION SPECIALISTS CMP SOLO - LOW SMOKE & FUME - HALOGEN FREE PRODUCTS CMP BW SOLO LSF Industrial Cable Gland Kit TM Brass indoor cable gland kit for all types of SWA cable, providing mechanical cable retention, and electrical continuity via armour wire termination. The cable gland kit includes CMP SOLO LSF Shrouds. TECHNICAL DATA Type BW SOLO-Kit Up to & including size 25 - 2 cable glands, 2 locknuts, 2 earth tags & 2 LSF shrouds. Size 32 & above - 1 cable gland, 1 locknut, 1 earth tag & 1 LSF shroud. Cable Gland Kit Contents Design Specification BS6121 : 2005 Cable Gland Material Brass Continuous Operating Temperature -60º C to +150º C Cable Type Single Wire Armour Armour Clamping Two Part Armour Lock For Dimension Drawing See Page 77 CW SOLO LSF Industrial Cable Gland Kit Brass indoor and outdoor cable gland git for all types of SWA cable, providing environmental seal on the cable outer sheath. The cable gland also provides mechanical cable retention, and electrical continuity via armour wire termination. The cable gland kit includes CMP SOLO LSF shrouds and seals. TM TECHNICAL DATA Type CW SOLO-Kit Up to & including size 25 - 2 cable glands, 2 locknuts, 2 earth tags & 2 LSF shrouds. Size 32 & above - 1 cable gland, 1 locknut, 1 earth tag & 1 LSF shroud. Cable Gland Kit Contents Design Specification BS6121 : Part 1 : 1989, EN50262:1999 Cable Gland Material Brass Continuous Operating Temperature -60º C to +150º C Cable Type Single Wire Armour Armour Clamping Detachable Armour Cone & AnyWay Universal Clamping Ring For Dimension Drawing See Page 80 Note : Ferrule colour coded gold for ease of LSF identification. Cable Gland Selection Table BW SOLO Cable Metric Minimum Gland Entry Thread Size Thread Length CW SOLO Cable Bedding Diameter Max. Overall Cable Diameter Max. Ordering Reference LSF Shroud Reference Cable Bedding Diameter Max.- Overall Cable Diameter Ordering Reference LSF Armour Shroud Wire Ref. Diameter Min Max 20S/16 M20 15.0 - - - - 8.7 6.1 11.5 20S16CWLSF2RA LSF02 0.9 20S M20 10.0 11.7 16.1 20SBWLSF2RA LSF01 11.7 9.5 15.9 20SCWLSF2RA LSF04 0.9/1.25 20 M20 10.0 14.0 21.1 20BWLSF2RA LSF05 14.0 12.5 20.9 20CWLSF2RA LSF06 0.9/1.25 25 M25 10.0 20.0 27.4 25BWLSF2RA LSF07 20.0 18.2 26.2 25CWLSF2RA LSF09 1.25/1.6 32 M32 10.0 26.3 34.4 32BWLSF2RA LSF10 26.3 23.7 33.9 32CWLSF2RA LSF11 1.6/2.0 40 M40 15.0 26.3 42.4 40BWLSF2RA LSF12 32.2 27.9 40.4 40CWLSF2RA LSF15 1.6/2.0 50S M50 15.0 38.2 50.1 50SBWLSF2RA LSF16 38.2 35.2 46.7 50SCWLSF2RA LSF18 2.0/2.5 50 M50 15.0 44.1 55.7 50BWLSF2RA LSF19 44.1 40.4 53.1 50CWLSF2RA LSF21 2.0/2.5 63S M63 15.0 50.0 62.4 63SBWLSF2RA LSF22 50.0 45.6 59.4 63SCWLSF2RA LSF23 2.5 63 M63 15.0 56.0 68.2 63BWLSF2RA LSF24 56.0 54.6 65.9 63CWLSF2RA LSF25 2.5 75S M75 15.0 62.0 76.8 75SBWLSF2RA LSF27 62.0 59.0 72.1 75SCWLSF2RA LSF28 2.5 75 M75 15.0 68.0 82.9 75BWLSF2RA LSF29 68.0 66.7 78.5 75CWLSF2RA LSF30 2.5/3.15 All dimensions in millimetres 97 www.cmp-products.com

CMP BW32 LSF Brass Cable Gland (Zero Halogen) 26.2-34.4mm

Recommended

Recommended

More Related Content

Similar to CMP BW32 LSF Brass Cable Gland (Zero Halogen) 26.2-34.4mm

Similar to CMP BW32 LSF Brass Cable Gland (Zero Halogen) 26.2-34.4mm (20)

More from Thorne & Derrick International

More from Thorne & Derrick International (20)

Recently uploaded

Recently uploaded (20)

CMP BW32 LSF Brass Cable Gland (Zero Halogen) 26.2-34.4mm