Detection of Water Level, Quality and Leakage using Raspberry Pi with Interne...IRJET Journal
This document describes a system that uses sensors and a Raspberry Pi to monitor water quality, level, and pressure in real-time. pH and turbidity sensors measure water quality parameters. An ultrasonic sensor measures water level in a tank, and LEDs indicate the level. A force sensitive resistor sensor detects water pressure and potential leaks. The Raspberry Pi collects sensor readings, stores data in a database, and sends SMS alerts when thresholds are exceeded. It also hosts a website to view current readings. The system aims to efficiently monitor domestic water use and quality in an automated way using Internet of Things technologies.
The Chloroclam water quality monitor continually monitors and reports chlorine residual data from water distribution networks using high accuracy membrane sensing. It accesses the water main via fire hydrants and transmits data via GPRS multiple times per day. The monitor provides real-time chlorine monitoring to allow proactive water quality management.
Coastal Water Quality Monitoring SystemChris Goding
This document discusses using a single instrument mounted on a buoy to take water quality measurements at multiple depths. It notes that using a single instrument allows detecting smaller differences between depths than using separate instruments. Clear and repeatable differences were observed between shallow, middle and deep depths down to a few parts per billion. Taking measurements at multiple depths and over time helped understand complicated nutrient cycling processes influenced by nearby aquaculture and tidal cycles.
Sensorex . . . Your Water Quality Matters!Tim Schilz
Sensorex is a global leader in design and manufacture of quality sensors for water quality and industrial process applications. The company offers more than 2000 sensor packages for pH, ORP, Conductivity, Dissolved Oxygen, UV Transmittance and other specialty measurements, as well as a full line of sensor accessories. Its expert technical support engineers solve analytical sensor challenges with custom designs and off the shelf products. Visit the Sensorex website at www.Sensorex.com.
Sensorex is a Halma company. Halma makes products for hazard detection and life protection and is a market leader in specialist electronic, safety and environmental technologies. Visit the Halma web site at www.halma.com.
Internet of Things group-project for Pervasive Systems course - Spring 2018 at "Sapienza Università di Roma".
The idea is to create an Android App that collects data about the positions of the fountains worldwide and a cheap monitoring system to get the quality of the water.
You can check our Github repository here:
https://github.com/WaterMApp/AndroidApp
Demo:
https://youtu.be/W4Bmlybk8DI
Members:
Giuseppe Andreetti
Adriano Pimpini
Lucia Rodinò
Gabrio Tognozzi
Detection of Water Level, Quality and Leakage using Raspberry Pi with Interne...IRJET Journal
This document describes a system that uses sensors and a Raspberry Pi to monitor water quality, level, and pressure in real-time. pH and turbidity sensors measure water quality parameters. An ultrasonic sensor measures water level in a tank, and LEDs indicate the level. A force sensitive resistor sensor detects water pressure and potential leaks. The Raspberry Pi collects sensor readings, stores data in a database, and sends SMS alerts when thresholds are exceeded. It also hosts a website to view current readings. The system aims to efficiently monitor domestic water use and quality in an automated way using Internet of Things technologies.
The Chloroclam water quality monitor continually monitors and reports chlorine residual data from water distribution networks using high accuracy membrane sensing. It accesses the water main via fire hydrants and transmits data via GPRS multiple times per day. The monitor provides real-time chlorine monitoring to allow proactive water quality management.
Coastal Water Quality Monitoring SystemChris Goding
This document discusses using a single instrument mounted on a buoy to take water quality measurements at multiple depths. It notes that using a single instrument allows detecting smaller differences between depths than using separate instruments. Clear and repeatable differences were observed between shallow, middle and deep depths down to a few parts per billion. Taking measurements at multiple depths and over time helped understand complicated nutrient cycling processes influenced by nearby aquaculture and tidal cycles.
Sensorex . . . Your Water Quality Matters!Tim Schilz
Sensorex is a global leader in design and manufacture of quality sensors for water quality and industrial process applications. The company offers more than 2000 sensor packages for pH, ORP, Conductivity, Dissolved Oxygen, UV Transmittance and other specialty measurements, as well as a full line of sensor accessories. Its expert technical support engineers solve analytical sensor challenges with custom designs and off the shelf products. Visit the Sensorex website at www.Sensorex.com.
Sensorex is a Halma company. Halma makes products for hazard detection and life protection and is a market leader in specialist electronic, safety and environmental technologies. Visit the Halma web site at www.halma.com.
Internet of Things group-project for Pervasive Systems course - Spring 2018 at "Sapienza Università di Roma".
The idea is to create an Android App that collects data about the positions of the fountains worldwide and a cheap monitoring system to get the quality of the water.
You can check our Github repository here:
https://github.com/WaterMApp/AndroidApp
Demo:
https://youtu.be/W4Bmlybk8DI
Members:
Giuseppe Andreetti
Adriano Pimpini
Lucia Rodinò
Gabrio Tognozzi
Case Study: Enhanced WWTP Performance & Reduced Operating Costs with Online M...Xylem Inc.
This document summarizes a case study on how online process monitoring and automated control systems were implemented at a wastewater treatment facility to enhance performance, reduce operating costs, and improve process stability. Sensors were installed to monitor dissolved oxygen, phosphorus, and suspended solids levels. Automated control systems were then used to control aeration, chemical dosing, sludge wasting, and solid retention time. The results included 10-15% energy savings from aeration control, a 95% reduction in chemical usage, and more stable process operation compared to previous manual control methods.
City of Asheboro Carotek Process Solutions Summit presentationCarotek
Learn how the City of Asheboro is meeting government regulations, reducing power consumption, saving on chemical cost by using the proper instrumentation equipment. This leads to real-time data, better monitoring and control methods, cost savings and more for the city.
Reducing costs through subsea wireless automation June 2017John Gibbs
This presentation explores the latest subsea wireless products and automation technologies including hybrid wireless, Subsea Internet of Things and Subsea Cloud Computing and their use to increase production, reduce operating costs, reduce asset integrity management costs and extend asset life.
The ChemDAQ Steri-Trac gas monitoring system provides toxic gas detection and workplace safety. It features a modular design that allows for custom configurations, and a sensor exchange program that reduces operating costs by replacing sensors every 4 months without requiring on-site calibration. The system monitors ethylene oxide, hydrogen peroxide, ozone, and peracetic acid, and provides trend analysis and early warnings via software.
The document discusses water vapor permeability analyzers manufactured by Systech Illinois for testing medical and pharmaceutical packaging. The analyzers precisely measure the water vapor transmission rate of samples using a proprietary coulometric sensor technology. They control temperature, humidity, and gas flows to test samples in a range of 0.002-1000 g/m2/day. The permeability data generated helps ensure drug packages maintain quality by preventing moisture contamination or excess drying during shelf life.
Lyssy l80 5000 Water Vapour Permeability TesterSystechIllinois
Easy and reliable testing for water vapour permeability. The L80-5000 is the latest generation of the proven L80 series, which has been used successfully for decades in many labs. With the L80-5000, the testing of water vapour permeability becomes very simple.
Frequently the most immediate financial return we can get from gathering data from things (and making decisions on that data) is from existing installed assets, rather than new build projects. The problem is that those assets often have not been designed or installed with monitoring in mind.
This talk examines such a project in the Electricity Distribution business, and the critical challenges imposed by dealing with the practical problems of what is already installed, rather than assuming a clean sheet of paper.
This document describes a proportional chlorination system with dosing devices that can be used with tanks ranging from 50L to 120L. It includes electromagnetic dosing pumps that can be set to a constant or proportional flow rate based on an external analog or digital signal. The system uses a PVDF pump head, ceramic ball valve, polyethylene tanks, and threaded water meters that are compliant with regulations.
The digital clinical refractomers, which are ideally used for urine and serum protein analysis are extremely accurate and precise optical instruments. These digital clinical refratometers use latest and specific optical cells. These refractomers use digital picture processing technique and accurate temperature compensation. Advanced microprocessor is centre of the digital clinical refractometer which measures the serum protein and urine explicit gravity with precisions displays as three and half figures number liquid crystal displayer. The refractometer is simple to operate and easy to carry. This equipment is very sturdy and has a long battery life. For More Information Please Logon http://goo.gl/s8AAGw
Process Monitoring and Automation of Water Resource Recovery Facilities | IQ ...Xylem Inc.
The YSI IQ SensorNet 2020 XT is a water quality system for a complete sensor network. It's ideal for various installation needs. The modular system can accept additional sensors easily at any time. This is a powerful system to continuously measure water quality parameters anywhere in a facility for process control.
Measure:
Dissolved oxygen (optical or electrochemical)
pH
ORP
Conductivity
Temperature
Turbidity - ultrasonic cleaning
TSS (total suspended solids) - ultrasonic cleaning
Ammonium
Nitrate*
Potassium
COD (chemical oxygen demand) - ultrasonic cleaning
TOC (total organic carbon) - ultrasonic cleaning
DOC (dissolved organic carbon share of TOC) - ultrasonic cleaning
SAC (spectral absorption coefficient) - ultrasonic cleaning
BOD (biochemical oxygen demand) - ultrasonic cleaning
UVT-254
Orthophosphate
Immediate benefits include better network visibility and management, early detection of network failures, improved compliance with regulatory targets and cost savings (energy, pump/blower maintenance, labor).
Probing the atmosphere - new radar & lidar technologies for remote sensing of...CLIC Innovation Ltd
MMEA (The Measurement, Monitoring and Environmental Efficiency Assessment) research program final seminar presentation by Dr. Ari-Matti Harri, Finnish Meteorological Institute
This document proposes the design of a low-cost, autonomous buoy called SAMMI that can monitor mercury levels in waterways. SAMMI uses square-wave anodic stripping voltammetry to accurately measure trace levels of ionic mercury in water samples. It features a 3D printed hull that houses a radial flow cell for water sampling and analysis, powered by solar panels and batteries. Validation tests showed the buoy design enables both rapid, qualitative scans and full, quantitative scans to determine mercury concentrations and presence. The goal is to empower communities affected by mercury pollution through decentralized water quality monitoring.
Hc51 m totaly hydrocarbon analyser datasheeta1-cbiss
The HC51M is a hydrocarbon and total VOC analyzer that uses flame ionization detection to measure hydrocarbon concentrations in ambient air. It has high sensitivity and stability, temperature controlled pneumatics, and allows for remote troubleshooting, calibration checks, and data collection. The instrument has user-friendly software that allows for advanced configuration and monitoring, and its automatic response time function determines the optimal integration time for hydrocarbon measurements.
This document provides guidelines for real-time effluent quality monitoring systems in India. It discusses the need for continuous online monitoring to strengthen compliance monitoring of polluting industries. Various technologies for online measurement of parameters like pH, COD, BOD are described, including photometric, ion selective electrodes, colorimetric, UV absorption, and total organic carbon methods. Considerations for effective online analyzers like automation, precision, robustness are outlined. The suitability of different technologies for monitoring various industrial sectors is also assessed in tables.
Seatooth PipeLogger is a retrofit subsea wireless temperature logger/controller for use on XTs, pipelines, risers and manifolds. It measure process temperature without penetration. It is a cost effective alternative to hard wired systems for production or drilling control, flow assurance and asset integrity monitoring and calibration.
Fouling and contamination of sensors was studied in waste water applications. Tests were conducted at two waste water treatment plants to analyze fouling on different sensor surfaces and evaluate mitigation techniques. Ultrasound did not effectively reduce fouling and may have worsened it. Certain coatings and ultraviolet light showed promise in mitigating fouling on optical sensors. Further testing of photocatalytic coatings combined with UV light could provide an effective non-fouling solution for optical sensors in waste water applications.
We are manufacturers of high precision water bath in India
since 1990. Our high precision water baths are widely used
for day to day bacteriological and varied laboratory applications requiring incubation as well as general tests
and procedures in variety of research and testing
laboratories.
We are manufacturers of circulatory water bath, circulatory water bath India, circulatory water bath suppliers, water bath equipments. We supply all type of equipments of laboratory and hospitals. For More Information Please Logon http://goo.gl/lXiUsS
Detection of lpg leakage by live monitoring and controlling from smart phoneIRJET Journal
The document describes a system for detecting LPG gas leaks and fires using sensors connected to a microcontroller that sends alerts to users' smartphones and authorities. The system monitors gas levels, temperature, humidity and can automatically close the gas valve, open ventilation, cut power if a leak or fire is detected. It provides real-time monitoring of gas levels and safety measures to prevent accidents from gas leaks in homes.
1) The document describes MEDICA water purification systems for clinical diagnostics. MEDICA systems provide consistent, high quality water to ensure accurate diagnostic test results from clinical analyzers.
2) Different MEDICA systems are suited for various applications depending on required water volumes and number of analyzers. The MEDICA-R and MEDICA-D systems provide 7-15 liters/hour of water for single analyzers, while the MEDICA Pro systems can supply up to 120 liters/hour to multiple large analyzers.
3) All MEDICA systems precisely control water quality through filtration, deionization, and UV treatment to achieve bacteria levels below standards and prevent interference in diagnostic tests.
Case Study: Enhanced WWTP Performance & Reduced Operating Costs with Online M...Xylem Inc.
This document summarizes a case study on how online process monitoring and automated control systems were implemented at a wastewater treatment facility to enhance performance, reduce operating costs, and improve process stability. Sensors were installed to monitor dissolved oxygen, phosphorus, and suspended solids levels. Automated control systems were then used to control aeration, chemical dosing, sludge wasting, and solid retention time. The results included 10-15% energy savings from aeration control, a 95% reduction in chemical usage, and more stable process operation compared to previous manual control methods.
City of Asheboro Carotek Process Solutions Summit presentationCarotek
Learn how the City of Asheboro is meeting government regulations, reducing power consumption, saving on chemical cost by using the proper instrumentation equipment. This leads to real-time data, better monitoring and control methods, cost savings and more for the city.
Reducing costs through subsea wireless automation June 2017John Gibbs
This presentation explores the latest subsea wireless products and automation technologies including hybrid wireless, Subsea Internet of Things and Subsea Cloud Computing and their use to increase production, reduce operating costs, reduce asset integrity management costs and extend asset life.
The ChemDAQ Steri-Trac gas monitoring system provides toxic gas detection and workplace safety. It features a modular design that allows for custom configurations, and a sensor exchange program that reduces operating costs by replacing sensors every 4 months without requiring on-site calibration. The system monitors ethylene oxide, hydrogen peroxide, ozone, and peracetic acid, and provides trend analysis and early warnings via software.
The document discusses water vapor permeability analyzers manufactured by Systech Illinois for testing medical and pharmaceutical packaging. The analyzers precisely measure the water vapor transmission rate of samples using a proprietary coulometric sensor technology. They control temperature, humidity, and gas flows to test samples in a range of 0.002-1000 g/m2/day. The permeability data generated helps ensure drug packages maintain quality by preventing moisture contamination or excess drying during shelf life.
Lyssy l80 5000 Water Vapour Permeability TesterSystechIllinois
Easy and reliable testing for water vapour permeability. The L80-5000 is the latest generation of the proven L80 series, which has been used successfully for decades in many labs. With the L80-5000, the testing of water vapour permeability becomes very simple.
Frequently the most immediate financial return we can get from gathering data from things (and making decisions on that data) is from existing installed assets, rather than new build projects. The problem is that those assets often have not been designed or installed with monitoring in mind.
This talk examines such a project in the Electricity Distribution business, and the critical challenges imposed by dealing with the practical problems of what is already installed, rather than assuming a clean sheet of paper.
This document describes a proportional chlorination system with dosing devices that can be used with tanks ranging from 50L to 120L. It includes electromagnetic dosing pumps that can be set to a constant or proportional flow rate based on an external analog or digital signal. The system uses a PVDF pump head, ceramic ball valve, polyethylene tanks, and threaded water meters that are compliant with regulations.
The digital clinical refractomers, which are ideally used for urine and serum protein analysis are extremely accurate and precise optical instruments. These digital clinical refratometers use latest and specific optical cells. These refractomers use digital picture processing technique and accurate temperature compensation. Advanced microprocessor is centre of the digital clinical refractometer which measures the serum protein and urine explicit gravity with precisions displays as three and half figures number liquid crystal displayer. The refractometer is simple to operate and easy to carry. This equipment is very sturdy and has a long battery life. For More Information Please Logon http://goo.gl/s8AAGw
Process Monitoring and Automation of Water Resource Recovery Facilities | IQ ...Xylem Inc.
The YSI IQ SensorNet 2020 XT is a water quality system for a complete sensor network. It's ideal for various installation needs. The modular system can accept additional sensors easily at any time. This is a powerful system to continuously measure water quality parameters anywhere in a facility for process control.
Measure:
Dissolved oxygen (optical or electrochemical)
pH
ORP
Conductivity
Temperature
Turbidity - ultrasonic cleaning
TSS (total suspended solids) - ultrasonic cleaning
Ammonium
Nitrate*
Potassium
COD (chemical oxygen demand) - ultrasonic cleaning
TOC (total organic carbon) - ultrasonic cleaning
DOC (dissolved organic carbon share of TOC) - ultrasonic cleaning
SAC (spectral absorption coefficient) - ultrasonic cleaning
BOD (biochemical oxygen demand) - ultrasonic cleaning
UVT-254
Orthophosphate
Immediate benefits include better network visibility and management, early detection of network failures, improved compliance with regulatory targets and cost savings (energy, pump/blower maintenance, labor).
Probing the atmosphere - new radar & lidar technologies for remote sensing of...CLIC Innovation Ltd
MMEA (The Measurement, Monitoring and Environmental Efficiency Assessment) research program final seminar presentation by Dr. Ari-Matti Harri, Finnish Meteorological Institute
This document proposes the design of a low-cost, autonomous buoy called SAMMI that can monitor mercury levels in waterways. SAMMI uses square-wave anodic stripping voltammetry to accurately measure trace levels of ionic mercury in water samples. It features a 3D printed hull that houses a radial flow cell for water sampling and analysis, powered by solar panels and batteries. Validation tests showed the buoy design enables both rapid, qualitative scans and full, quantitative scans to determine mercury concentrations and presence. The goal is to empower communities affected by mercury pollution through decentralized water quality monitoring.
Hc51 m totaly hydrocarbon analyser datasheeta1-cbiss
The HC51M is a hydrocarbon and total VOC analyzer that uses flame ionization detection to measure hydrocarbon concentrations in ambient air. It has high sensitivity and stability, temperature controlled pneumatics, and allows for remote troubleshooting, calibration checks, and data collection. The instrument has user-friendly software that allows for advanced configuration and monitoring, and its automatic response time function determines the optimal integration time for hydrocarbon measurements.
This document provides guidelines for real-time effluent quality monitoring systems in India. It discusses the need for continuous online monitoring to strengthen compliance monitoring of polluting industries. Various technologies for online measurement of parameters like pH, COD, BOD are described, including photometric, ion selective electrodes, colorimetric, UV absorption, and total organic carbon methods. Considerations for effective online analyzers like automation, precision, robustness are outlined. The suitability of different technologies for monitoring various industrial sectors is also assessed in tables.
Seatooth PipeLogger is a retrofit subsea wireless temperature logger/controller for use on XTs, pipelines, risers and manifolds. It measure process temperature without penetration. It is a cost effective alternative to hard wired systems for production or drilling control, flow assurance and asset integrity monitoring and calibration.
Fouling and contamination of sensors was studied in waste water applications. Tests were conducted at two waste water treatment plants to analyze fouling on different sensor surfaces and evaluate mitigation techniques. Ultrasound did not effectively reduce fouling and may have worsened it. Certain coatings and ultraviolet light showed promise in mitigating fouling on optical sensors. Further testing of photocatalytic coatings combined with UV light could provide an effective non-fouling solution for optical sensors in waste water applications.
We are manufacturers of high precision water bath in India
since 1990. Our high precision water baths are widely used
for day to day bacteriological and varied laboratory applications requiring incubation as well as general tests
and procedures in variety of research and testing
laboratories.
We are manufacturers of circulatory water bath, circulatory water bath India, circulatory water bath suppliers, water bath equipments. We supply all type of equipments of laboratory and hospitals. For More Information Please Logon http://goo.gl/lXiUsS
Detection of lpg leakage by live monitoring and controlling from smart phoneIRJET Journal
The document describes a system for detecting LPG gas leaks and fires using sensors connected to a microcontroller that sends alerts to users' smartphones and authorities. The system monitors gas levels, temperature, humidity and can automatically close the gas valve, open ventilation, cut power if a leak or fire is detected. It provides real-time monitoring of gas levels and safety measures to prevent accidents from gas leaks in homes.
1) The document describes MEDICA water purification systems for clinical diagnostics. MEDICA systems provide consistent, high quality water to ensure accurate diagnostic test results from clinical analyzers.
2) Different MEDICA systems are suited for various applications depending on required water volumes and number of analyzers. The MEDICA-R and MEDICA-D systems provide 7-15 liters/hour of water for single analyzers, while the MEDICA Pro systems can supply up to 120 liters/hour to multiple large analyzers.
3) All MEDICA systems precisely control water quality through filtration, deionization, and UV treatment to achieve bacteria levels below standards and prevent interference in diagnostic tests.
10 - Xylem River Water Monitoring WORLD BANK-Sep-15indiawrm
This document discusses river and reservoir monitoring solutions from Xylem. It describes Xylem's portfolio of brands and monitoring equipment for measuring parameters like flow, level, water quality, and conducting full discharge measurements. This includes in-situ sondes, handheld devices, permanent monitors, and analytics. It also covers topics like sensor quality, fouling prevention, data transmission, and design of monitoring stations. The goal is to provide customers with innovative tools to monitor water resources and help address challenges like water scarcity and pollution.
The IMD-W system provides instantaneous microbial detection for purified waters used in pharmaceutical and medical applications. It can continuously monitor water systems online or test individual samples in a laboratory. The system distinguishes biological from non-biological particles based on optical detection of particle size and fluorescence. It provides real-time microbial monitoring to ensure water quality, validate water systems, and improve process understanding.
The RA802 Pharmaceutical Analyser combines Renishaw's proprietary LiveTrackTM and StreamLineTM technologies to generate chemical images up to 150 times faster than conventional methods, whilst maintaining focus ? ensuring high quality pharmaceutical tablet imaging.
Multiparameter Water Quality Meter is a fully spontaneous meter that measures and tracks water quality by combining temperature, conductivity, dissolved oxygen,
pH, mV, and turbidity in one unit. Featuring a pH range between 0 to 14 that works within a temperature range between 0 to 50℃. Outfitted with a sensor with
a conductivity range of 0 to 2000 mS/cm. Enhanced by smooth data transfer and connection with additional control or monitoring systems.
The document discusses PURELAB, a range of laboratory water purification systems from ELGA LabWater. PURELAB offers systems to produce different types (I-III) of purified water required for research applications. The systems use various technologies like ultrafiltration, UV treatment, and ion exchange to purify water. They are designed for reliability, ease of use, and to provide water of the necessary purity for different analytical techniques. The document provides details on several PURELAB models tailored for different throughput needs and feed water sources.
The AquaTROLL 600 is a customizable, powerful, and easy-to-use multiparameter sonde for monitoring water quality. It combines industry-leading sensors for measuring parameters like dissolved oxygen, pH, conductivity, and temperature, with a built-in display, long 9+ month battery life, and smartphone connectivity. This allows users to easily manage and access water quality data from remote sites using mobile apps. The sonde is designed for challenging environments and long-term deployments, and provides accurate, reliable data through self-cleaning, anti-fouling sensors and smart diagnostics.
Meet the demanding needs of high-purity water measurements and high-acid cation exchange applications with the Thermo Scientific™ Orion™ 2111XP Sodium Analyzer. This system offers unmatched reliability in analyzing critical sample streams throughout the power/steam generation and industrial water industry. It is an all-in-one system from one of the most trusted names in sodium monitoring.
This document summarizes a company that produces water quality monitoring instruments. It describes several of their product lines, including dissolved oxygen meters called OxySense, turbidity and suspended solids monitors called SoliSense, and total and free chlorine analyzers called HaloSense. These instruments use optical and electrochemical sensors and can be integrated with different controller models to provide monitoring, control, data logging and communication capabilities. The company aims to provide reliable, easy to maintain and cost-effective solutions for various water and wastewater treatment applications.
This document summarizes sensors and monitoring systems developed for water management and agriculture in India. It describes:
1. Sensor monitoring projects in the Krishna and Cauvery river basins to measure water levels, temperature, humidity and flows.
2. Achievements including establishing sensor labs, networks, and developing sensors to monitor on-farm, canal and reservoir water levels.
3. The technical architecture of the Canal Network Flow Monitoring System using ultrasonic sensors to measure water levels and flows.
This document discusses using near infrared (NIR) spectroscopy in a network to analyze fishmeal. Key points:
- A trial at Matis in 2013 analyzed over 200 fishmeal samples for moisture, protein, fat, ash, salt, TVN, and cadaverine using a DA7250 NIR analyzer. New calibration models were developed that showed good results.
- An NIR network involves accredited reference labs, standardized instruments calibrated to a "master" regularly, and web-based software to monitor instruments and share calibration models and reference data.
- Benefits include uniform quality assurance, robust calibration models, lower analysis costs, and simplified implementation of standards across members. The proposed Icelandic network would be
Techport is an end-to end latest solutions provider for remote monitoring applications.We offer the most comprehensive set of chemical and equipment solutions and services available, helping our customers manage and optimize their water resources and process challenges across industries and municipalities.
This document summarizes an online spectroscopy control system that uses fiber optic sensors for non-invasive measurement of liquids and solids. The system uses miniature CCD detection technology and no-moving optics for stable, chemical-free operation. It features customizable software, remote internet/intranet access, and the ability to automatically monitor and control up to 8 sensors simultaneously for fast, versatile analysis of industrial processes.
The GeneDisc Rapid Microbiology System provides microbial test results in as little as two hours using quantitative PCR technology. The system consists of a DNA Extractor that prepares samples, GeneDisc plates that are loaded into a GeneDisc Cycler for analysis. It tests for key pathogens in biopharmaceuticals, foods, and water. The system offers simplicity, speed, security of results, and cost savings compared to traditional methods.
The Aqua TROLL 500 is a customizable multiparameter sonde for water quality monitoring. It comes with sensors for dissolved oxygen, conductivity, pH, salinity, and other parameters. The sonde can connect to wireless data loggers for remote monitoring or be used as a handheld device with a mobile app. The flexible sonde reduces costs compared to single-use instruments and provides reliable, real-time data for applications such as surface water monitoring, aquaculture, and more.
The document provides information about various services and equipment available from Chopin Technologies for controlling, analyzing, and monitoring grain and flour. This includes customizing infrared calibrations, a fully equipped laboratory for research and analysis, training on equipment use, silo thermometry solutions, grain sampling equipment, grain cleaners, moisture meters, a flour analyzer, and more. Customers can get assistance from various teams at Chopin Technologies.
Improving the viability of probiotics by encapsulation methods for developmen...Open Access Research Paper
The popularity of functional foods among scientists and common people has been increasing day by day. Awareness and modernization make the consumer think better regarding food and nutrition. Now a day’s individual knows very well about the relation between food consumption and disease prevalence. Humans have a diversity of microbes in the gut that together form the gut microflora. Probiotics are the health-promoting live microbial cells improve host health through gut and brain connection and fighting against harmful bacteria. Bifidobacterium and Lactobacillus are the two bacterial genera which are considered to be probiotic. These good bacteria are facing challenges of viability. There are so many factors such as sensitivity to heat, pH, acidity, osmotic effect, mechanical shear, chemical components, freezing and storage time as well which affects the viability of probiotics in the dairy food matrix as well as in the gut. Multiple efforts have been done in the past and ongoing in present for these beneficial microbial population stability until their destination in the gut. One of a useful technique known as microencapsulation makes the probiotic effective in the diversified conditions and maintain these microbe’s community to the optimum level for achieving targeted benefits. Dairy products are found to be an ideal vehicle for probiotic incorporation. It has been seen that the encapsulated microbial cells show higher viability than the free cells in different processing and storage conditions as well as against bile salts in the gut. They make the food functional when incorporated, without affecting the product sensory characteristics.
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...Open Access Research Paper
Water polluted by dyestuffs compounds is a global threat to health and the environment; accordingly, we prepared a green novel sorbent chemical and Physical system from an algae, chitosan and chitosan nanoparticle and impregnated with algae with chitosan nanocomposite for the sorption of Malachite green dye from water. The algae with chitosan nanocomposite by a simple method and used as a recyclable and effective adsorbent for the removal of malachite green dye from aqueous solutions. Algae, chitosan, chitosan nanoparticle and algae with chitosan nanocomposite were characterized using different physicochemical methods. The functional groups and chemical compounds found in algae, chitosan, chitosan algae, chitosan nanoparticle, and chitosan nanoparticle with algae were identified using FTIR, SEM, and TGADTA/DTG techniques. The optimal adsorption conditions, different dosages, pH and Temperature the amount of algae with chitosan nanocomposite were determined. At optimized conditions and the batch equilibrium studies more than 99% of the dye was removed. The adsorption process data matched well kinetics showed that the reaction order for dye varied with pseudo-first order and pseudo-second order. Furthermore, the maximum adsorption capacity of the algae with chitosan nanocomposite toward malachite green dye reached as high as 15.5mg/g, respectively. Finally, multiple times reusing of algae with chitosan nanocomposite and removing dye from a real wastewater has made it a promising and attractive option for further practical applications.
RoHS stands for Restriction of Hazardous Substances, which is also known as t...vijaykumar292010
RoHS stands for Restriction of Hazardous Substances, which is also known as the Directive 2002/95/EC. It includes the restrictions for the use of certain hazardous substances in electrical and electronic equipment. RoHS is a WEEE (Waste of Electrical and Electronic Equipment).
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...Joshua Orris
The incorporation of a 3DCSM and completion of HRSC provided a tool for enhanced, data-driven, decisions to support a change in remediation closure strategies. Currently, an approved pilot study has been obtained to shut-down the remediation systems (ISCO, P&T) and conduct a hydraulic study under non-pumping conditions. A separate micro-biological bench scale treatability study was competed that yielded positive results for an emerging innovative technology. As a result, a field pilot study has commenced with results expected in nine-twelve months. With the results of the hydraulic study, field pilot studies and an updated risk assessment leading site monitoring optimization cost lifecycle savings upwards of $15MM towards an alternatively evolved best available technology remediation closure strategy.
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...Joshua Orris
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
2. Zero waste – all reagents are
kept sealed onboard
In water deployment – can be
deployed in water down to 6000m
Low Maintenance – long deployments
without retrieval or servicing
High Resolution Data – readings up to
every 5 mins
Long endurance – thousands of fully
calibrated real-time data points
Real-time Lab Quality Data – wirelessly
transmitted or logged onboard
Rapid Deployment – portable, easy setup
with no new infrastructure needed
ClearWater Sensors – Instrument Features and Benefits
3. Clearwater's portable water monitoring systems can quickly be set up
in remote locations, in water, and take long term data on water
chemistry.
Features and Benefits:
•Real-Time Data Access – all data is logged on-board the instrument in parallel
to outputting through common telemetry standards.
•Low Operating Maintenance and Easy Set Up – instruments can be deployed
for a year or more, remotely, taking data, without the need for maintenance.
•Lab-Quality Analysis – all instruments use the same high-precision, high
accuracy, chemistry analysis used in laboratories. All instruments automatically
self-calibrated to onboard standards. Zero drift and zero interferences.
Portable in-Water Chemistry Monitoring Instruments
Producing Lab Quality Data.
4. Real-time water quality data generation directly from any
environment
Nitrate sensor data subset (top panel, blue line) taken in a remote river monitoring study over a 1
year long deployment. Highly variable salinity and discharge rates did not affect data quality. Data
was validated to manual laboratory sampling (red discs). Instrument data is taken much more
frequently than lab-generated measurements.