Civil Engineering Resume
•
2 likes•2,124 views
This document is a resume for Tanuj Kumawat, a civil engineer. It lists his personal information, work experience from 2018 to present at RK Construction in Hyderabad, his education from 2013 to 2018 which includes a bachelor's degree, and software skills including AutoCad, Staad Pro, and Microsoft Office. It also lists his interests as bicycling, music, technology, learning, cricket, reading books, YouTube, and design.
Report
Share
Report
Share
Recommended
CHILAKALURIPER NDT REPORT.pdf
The document is a report on non-destructive tests conducted on an RCC framed structure in Guntur, Andhra Pradesh. Rebound hammer and ultrasonic pulse velocity tests were conducted at various locations on the structure. Test results found the average surface compressive strength from rebound hammer tests ranged from 14.2 to 28 MPa. Ultrasonic pulse velocity tests found average velocities ranging from 0.95 to 1.78 km/sec, indicating poor quality concrete according to Indian standards. In conclusion, the quality of concrete in the tested locations of the framed structure was determined to be poor based on the non-destructive test results.
Intern final report
In this internship report, one can find why Hyderabad Metro is required and how it is consrtucting. The organization flow and their roles are described here. Different construction activities, procedures are explained. The complete picture on overall construction and execution of Hyderabad Metro Rail is explained in this report.
Resume of Civil Engineer - BoQ
Resume of Civil Engineer - BoQ
job responsibilities of BoQ Engineer (Civil Engineering)
Modern CV formate of Civil Engineer - BoQ
EXPERIENCE CERTIFICATE
This document is an experience certificate for Mr. Jubin Francis, a Mechanical Engineer who worked as a Fire-Foreman Supervisor for SHM Marine PW Ltd from April 2014 to April 2016. His responsibilities included preparing equipment inspection schedules and reliability schedules, providing technical support to employees, performing routine maintenance on fire equipment, conducting failure analyses, analyzing production costs, and applying testing apparatus to operating equipment. The certificate verifies his satisfactory service and wishes him the best for his future career.
CDM Smith Experience Letter
Mr. Shah Zeb Khan was appointed as Assistant Resident Engineer by CDM Smith in June 2013, later being promoted to Resident Engineer. He worked diligently until the successful completion of the project in June 2015, demonstrating enthusiasm and knowledge. His employer recommends him highly for management positions due to his skills.
Recommended
CHILAKALURIPER NDT REPORT.pdf
The document is a report on non-destructive tests conducted on an RCC framed structure in Guntur, Andhra Pradesh. Rebound hammer and ultrasonic pulse velocity tests were conducted at various locations on the structure. Test results found the average surface compressive strength from rebound hammer tests ranged from 14.2 to 28 MPa. Ultrasonic pulse velocity tests found average velocities ranging from 0.95 to 1.78 km/sec, indicating poor quality concrete according to Indian standards. In conclusion, the quality of concrete in the tested locations of the framed structure was determined to be poor based on the non-destructive test results.
Intern final report
In this internship report, one can find why Hyderabad Metro is required and how it is consrtucting. The organization flow and their roles are described here. Different construction activities, procedures are explained. The complete picture on overall construction and execution of Hyderabad Metro Rail is explained in this report.
Resume of Civil Engineer - BoQ
Resume of Civil Engineer - BoQ
job responsibilities of BoQ Engineer (Civil Engineering)
Modern CV formate of Civil Engineer - BoQ
EXPERIENCE CERTIFICATE
This document is an experience certificate for Mr. Jubin Francis, a Mechanical Engineer who worked as a Fire-Foreman Supervisor for SHM Marine PW Ltd from April 2014 to April 2016. His responsibilities included preparing equipment inspection schedules and reliability schedules, providing technical support to employees, performing routine maintenance on fire equipment, conducting failure analyses, analyzing production costs, and applying testing apparatus to operating equipment. The certificate verifies his satisfactory service and wishes him the best for his future career.
CDM Smith Experience Letter
Mr. Shah Zeb Khan was appointed as Assistant Resident Engineer by CDM Smith in June 2013, later being promoted to Resident Engineer. He worked diligently until the successful completion of the project in June 2015, demonstrating enthusiasm and knowledge. His employer recommends him highly for management positions due to his skills.
Danish AYTB Experience Certificate (PDF)
Mr. Mohamad Danish Anis completed a summer internship at various departments of AYTB Company from June to September 2014. During this time, his conduct and code was very good, and he showed remarkable interest in technical fields and sustainability in oil and gas industries. He demonstrated excellent communication skills along with strong technical knowledge and interpersonal skills required for modern industry standards. He was found to be sincere and hardworking during his training in AYTB's Safety and Security System, Engineering & Maintenance, Fabrication & Machine Shops, Quality Assurance and Control System, and Procurement & Ware Housing System departments.
MEP Engineer Resume
This curriculum vitae is for Mohamed Aboobakkar Sidi, an electrical and electronics engineer from India currently working in Dubai. He has work experience as an electrical engineer in Dubai since 2014 and in India from 2013 to 2014. He completed his Bachelor's degree in Electrical and Electronics Engineering from Anna University in India. His roles and responsibilities include overseeing electrical and mechanical works, ensuring works meet specifications, and coordinating with other personnel.
Akash_ Symec Engineer Experience Certificate
Mr. Akash Naik worked as a Project Engineer at NriA) r V T . LTD. from January 13, 2014 to July 31, 2014. He was involved in designing and executing projects involving special purpose equipment and automation. The company found his performance to be very good and that he was diligent and hard working. He has now left the company of his own accord to pursue better prospects, and the company wishes him the best in his future endeavors.
L&T DMRC Summer Internship 2017
The document is a summer internship report submitted by Sunil Kumar detailing his internship from July 6th to July 15th, 2017 at the L&T-SUCG JV Delhi construction site for Phase 3 of the Delhi Metro Rail project. The report provides an overview of the organizations involved in the project (L&T, DMRC, SUCG), safety policies, construction methodology used at the Vasant Vihar metro station site, and details of the internship activities including tunneling, shaft construction, and batching plant operations.
Abdelrhaman Sayed - Experience Letter
Dicetek L.L.C. is an international IT solutions provider with offices in Dubai, Singapore, Chennai, and Illinois. The document is a letter of reference for Mr. Abdelrhaman Sayed who worked as a consultant for Dicetek from December 2013 to April 2014 when he was deployed at their client Barwa Bank in Doha, Qatar. The letter describes Mr. Sayed as initiative driven and technically sound. It was issued at his request to provide his service record with Dicetek.
training report civil engg. 7th sem
This document is Rajat Kumar's industrial training report submitted in partial fulfillment of the requirements for a Bachelor of Technology degree from Shoolini University. It includes a declaration by Rajat Kumar stating that the report is his original work. It also includes certificates from the chairperson of the Civil Engineering department and the head of the School of Mechanical and Civil Engineering confirming Rajat Kumar completed the training under their supervision. The report contains chapters on different types of roads, pavements, materials used in construction like cement, sand and aggregates, different brick bonds, the construction process for columns and foundations, and types of foundations.
Precast Bridges slides
Fast construction of bridges using precast concrete elements provides benefits to both owner agencies and contractors. For owners, it reduces the duration of work zones, lowering traffic handling costs and accident risks while causing less inconvenience to the public. Contractors benefit from reduced hazards, the ability to accomplish more work in less time with fewer weather delays, and lower costs. Examples are given of bridges constructed rapidly using precast concrete piles, pile caps, piers, abutments, beams, and other elements.
04 Rail Sleepers (Railway Engineering Lectures هندسة السكك الحديدية & Dr. Wal...
This document discusses different types of rail sleepers used in railway engineering, including their requirements, classification, materials, and practices in Saudi Arabia. The main types are wooden, steel, and concrete sleepers. Wooden sleepers have a life of 10-12 years but are suitable for many conditions. Steel sleepers last longer at 20-25 years but are prone to corrosion and expensive. Concrete sleepers, increasingly used in Saudi Arabia, are durable with a life of 40-50 years and offer stability, insulation, and gauge control. They are manufactured using pre-stressed concrete and a carousel curing process in Saudi plants.
Site civil engineer fiazuddin
A Talented, Results-driven Civil Engineering Professional with 10 years 07 month of Experience in Construction of Infrastructure, Roads, utilities, and Landscaping in the site inspections, supervision, quality control and construction management. Possess excellent analytical, problem solving, negotiation, client-contractor-consultant coordination, technical correspondence, management, communication, interpersonal and computer skills.
Project Manager CV -Rev
The document provides an executive summary and details of a project manager with over 30 years of experience. It summarizes their roles and responsibilities on various construction projects in countries like the UAE, Qatar, Angola, India, and Oman. It also lists their educational qualifications and skills.
7 applications in geotechnical engineering
Soil is one of the oldest and most complex construction materials due to variations in soil types. Karl Terzaghi studied soil mechanics in the early 20th century and established it as a discipline of civil engineering. The document defines key terms related to soil properties including porosity, saturation, void ratio, unit weights, and water content. It also discusses traditional areas of geotechnical engineering like site investigation, compaction, consolidation, and foundations. Site investigation involves characterizing subsurface conditions through borings, sampling, and laboratory testing.
Internship Certificate-DESCON
The document is a scanned receipt from a grocery store listing items purchased including milk, eggs, bread, and fruit. The total for the grocery purchase came to $23.45 after tax. The receipt provides a record of the date, time, payment method, and items in a standard grocery transaction.
Site engineer zak
This document provides a summary of Zishan Ahmad Khan's qualifications and experience. It includes sections summarizing his education, including a B.Tech in Civil Engineering from Sanjay Memorial Institute of Technology. It also outlines his professional experience as a Civil Site Engineer for M&M United Company Ltd in Jeddah, Saudi Arabia and as a graduate engineer and site engineer for Royal Infraconstru Ltd in India. The document also includes a short personal profile section with details about his name, date of birth, passport, and languages spoken.
WORK EXPERIENCE CERTIFICATE
This document is a letter of recommendation for Md. Shahjahan Kaber from his previous employer KARUPANNYA Rangpur Ltd. It certifies that Md. Shahjahan Kaber worked as a Financial Officer from January 2013 to August 2014. His responsibilities included budget preparation, financial policies and procedures, cash controls, general ledger maintenance, accounts payable processing, and financial statement preparation. The letter states that Md. Shahjahan Kaber is sincere, hardworking, obedient and punctual based on the author's knowledge.
GM CV-Nov16
This curriculum vitae provides personal and professional details of Golam Mostafa over 3 pages. It includes his name, address, contact information, date of birth, education history, language and computer skills, professional skills, training received, key qualifications, and descriptions of his roles and responsibilities on several infrastructure projects in Bangladesh from 1997 to the present. The CV demonstrates over 25 years of experience in planning, designing, and supervising rural road, bridge and market infrastructure projects for organizations such as LGED, World Vision Bangladesh, and GTZ of Germany.
LVT
LVT is a type of slab track system that has been proven successful on many railway projects worldwide due to its precise track geometry and excellent vibration protection. It consists of a concrete block, resilient pad, and rubber boot surrounded by unreinforced concrete. This two-level elastic design provides load distribution and reduces vibrations across different frequencies. LVT has been applied on over 900 km of track including three of the world's longest tunnels. It offers advantages such as more efficient vibration protection, high flexibility, and low installation and maintenance costs.
NFLetter
Mr. Kafeel Anwar worked as an Assistant Fire Officer at Noor Fatima Textile Processing Industries (Pvt) Ltd. from January 10, 2008 to April 30, 2009. During this time, he was found to be hard working, punctual, and trustworthy. He resigned voluntarily and was paid all legal dues. The company wishes him success in his future endeavors.
In 2015, Noor Fatima Textile Processing Industries (Pvt) Ltd. expressed satisfaction with the training provided by Rescue 1122 staff, including Mr. Kafeel Anwar, who served as a fire instructor. The training on firefighting and first aid techniques for company employees was found to be fully qualified and demonstrated
descon cretificate
Muhammad Nazir worked as a Rigging Supervisor for Descon Engineering in Abu Dhabi, UAE from June 22nd, 2008 to December 20th, 2014. A certificate from Descon Engineering states that Muhammad Nazir was found to be a hard working and obedient employee during his seven years with the company, and proved to be a valued member of Descon Engineering's project execution team.
More Related Content
What's hot
Danish AYTB Experience Certificate (PDF)
Mr. Mohamad Danish Anis completed a summer internship at various departments of AYTB Company from June to September 2014. During this time, his conduct and code was very good, and he showed remarkable interest in technical fields and sustainability in oil and gas industries. He demonstrated excellent communication skills along with strong technical knowledge and interpersonal skills required for modern industry standards. He was found to be sincere and hardworking during his training in AYTB's Safety and Security System, Engineering & Maintenance, Fabrication & Machine Shops, Quality Assurance and Control System, and Procurement & Ware Housing System departments.
MEP Engineer Resume
This curriculum vitae is for Mohamed Aboobakkar Sidi, an electrical and electronics engineer from India currently working in Dubai. He has work experience as an electrical engineer in Dubai since 2014 and in India from 2013 to 2014. He completed his Bachelor's degree in Electrical and Electronics Engineering from Anna University in India. His roles and responsibilities include overseeing electrical and mechanical works, ensuring works meet specifications, and coordinating with other personnel.
Akash_ Symec Engineer Experience Certificate
Mr. Akash Naik worked as a Project Engineer at NriA) r V T . LTD. from January 13, 2014 to July 31, 2014. He was involved in designing and executing projects involving special purpose equipment and automation. The company found his performance to be very good and that he was diligent and hard working. He has now left the company of his own accord to pursue better prospects, and the company wishes him the best in his future endeavors.
L&T DMRC Summer Internship 2017
The document is a summer internship report submitted by Sunil Kumar detailing his internship from July 6th to July 15th, 2017 at the L&T-SUCG JV Delhi construction site for Phase 3 of the Delhi Metro Rail project. The report provides an overview of the organizations involved in the project (L&T, DMRC, SUCG), safety policies, construction methodology used at the Vasant Vihar metro station site, and details of the internship activities including tunneling, shaft construction, and batching plant operations.
Abdelrhaman Sayed - Experience Letter
Dicetek L.L.C. is an international IT solutions provider with offices in Dubai, Singapore, Chennai, and Illinois. The document is a letter of reference for Mr. Abdelrhaman Sayed who worked as a consultant for Dicetek from December 2013 to April 2014 when he was deployed at their client Barwa Bank in Doha, Qatar. The letter describes Mr. Sayed as initiative driven and technically sound. It was issued at his request to provide his service record with Dicetek.
training report civil engg. 7th sem
This document is Rajat Kumar's industrial training report submitted in partial fulfillment of the requirements for a Bachelor of Technology degree from Shoolini University. It includes a declaration by Rajat Kumar stating that the report is his original work. It also includes certificates from the chairperson of the Civil Engineering department and the head of the School of Mechanical and Civil Engineering confirming Rajat Kumar completed the training under their supervision. The report contains chapters on different types of roads, pavements, materials used in construction like cement, sand and aggregates, different brick bonds, the construction process for columns and foundations, and types of foundations.
Precast Bridges slides
Fast construction of bridges using precast concrete elements provides benefits to both owner agencies and contractors. For owners, it reduces the duration of work zones, lowering traffic handling costs and accident risks while causing less inconvenience to the public. Contractors benefit from reduced hazards, the ability to accomplish more work in less time with fewer weather delays, and lower costs. Examples are given of bridges constructed rapidly using precast concrete piles, pile caps, piers, abutments, beams, and other elements.
04 Rail Sleepers (Railway Engineering Lectures هندسة السكك الحديدية & Dr. Wal...
This document discusses different types of rail sleepers used in railway engineering, including their requirements, classification, materials, and practices in Saudi Arabia. The main types are wooden, steel, and concrete sleepers. Wooden sleepers have a life of 10-12 years but are suitable for many conditions. Steel sleepers last longer at 20-25 years but are prone to corrosion and expensive. Concrete sleepers, increasingly used in Saudi Arabia, are durable with a life of 40-50 years and offer stability, insulation, and gauge control. They are manufactured using pre-stressed concrete and a carousel curing process in Saudi plants.
Site civil engineer fiazuddin
A Talented, Results-driven Civil Engineering Professional with 10 years 07 month of Experience in Construction of Infrastructure, Roads, utilities, and Landscaping in the site inspections, supervision, quality control and construction management. Possess excellent analytical, problem solving, negotiation, client-contractor-consultant coordination, technical correspondence, management, communication, interpersonal and computer skills.
Project Manager CV -Rev
The document provides an executive summary and details of a project manager with over 30 years of experience. It summarizes their roles and responsibilities on various construction projects in countries like the UAE, Qatar, Angola, India, and Oman. It also lists their educational qualifications and skills.
7 applications in geotechnical engineering
Soil is one of the oldest and most complex construction materials due to variations in soil types. Karl Terzaghi studied soil mechanics in the early 20th century and established it as a discipline of civil engineering. The document defines key terms related to soil properties including porosity, saturation, void ratio, unit weights, and water content. It also discusses traditional areas of geotechnical engineering like site investigation, compaction, consolidation, and foundations. Site investigation involves characterizing subsurface conditions through borings, sampling, and laboratory testing.
Internship Certificate-DESCON
The document is a scanned receipt from a grocery store listing items purchased including milk, eggs, bread, and fruit. The total for the grocery purchase came to $23.45 after tax. The receipt provides a record of the date, time, payment method, and items in a standard grocery transaction.
Site engineer zak
This document provides a summary of Zishan Ahmad Khan's qualifications and experience. It includes sections summarizing his education, including a B.Tech in Civil Engineering from Sanjay Memorial Institute of Technology. It also outlines his professional experience as a Civil Site Engineer for M&M United Company Ltd in Jeddah, Saudi Arabia and as a graduate engineer and site engineer for Royal Infraconstru Ltd in India. The document also includes a short personal profile section with details about his name, date of birth, passport, and languages spoken.
WORK EXPERIENCE CERTIFICATE
This document is a letter of recommendation for Md. Shahjahan Kaber from his previous employer KARUPANNYA Rangpur Ltd. It certifies that Md. Shahjahan Kaber worked as a Financial Officer from January 2013 to August 2014. His responsibilities included budget preparation, financial policies and procedures, cash controls, general ledger maintenance, accounts payable processing, and financial statement preparation. The letter states that Md. Shahjahan Kaber is sincere, hardworking, obedient and punctual based on the author's knowledge.
GM CV-Nov16
This curriculum vitae provides personal and professional details of Golam Mostafa over 3 pages. It includes his name, address, contact information, date of birth, education history, language and computer skills, professional skills, training received, key qualifications, and descriptions of his roles and responsibilities on several infrastructure projects in Bangladesh from 1997 to the present. The CV demonstrates over 25 years of experience in planning, designing, and supervising rural road, bridge and market infrastructure projects for organizations such as LGED, World Vision Bangladesh, and GTZ of Germany.
LVT
LVT is a type of slab track system that has been proven successful on many railway projects worldwide due to its precise track geometry and excellent vibration protection. It consists of a concrete block, resilient pad, and rubber boot surrounded by unreinforced concrete. This two-level elastic design provides load distribution and reduces vibrations across different frequencies. LVT has been applied on over 900 km of track including three of the world's longest tunnels. It offers advantages such as more efficient vibration protection, high flexibility, and low installation and maintenance costs.
NFLetter
Mr. Kafeel Anwar worked as an Assistant Fire Officer at Noor Fatima Textile Processing Industries (Pvt) Ltd. from January 10, 2008 to April 30, 2009. During this time, he was found to be hard working, punctual, and trustworthy. He resigned voluntarily and was paid all legal dues. The company wishes him success in his future endeavors.
In 2015, Noor Fatima Textile Processing Industries (Pvt) Ltd. expressed satisfaction with the training provided by Rescue 1122 staff, including Mr. Kafeel Anwar, who served as a fire instructor. The training on firefighting and first aid techniques for company employees was found to be fully qualified and demonstrated
descon cretificate
Muhammad Nazir worked as a Rigging Supervisor for Descon Engineering in Abu Dhabi, UAE from June 22nd, 2008 to December 20th, 2014. A certificate from Descon Engineering states that Muhammad Nazir was found to be a hard working and obedient employee during his seven years with the company, and proved to be a valued member of Descon Engineering's project execution team.
What's hot (20)
04 Rail Sleepers (Railway Engineering Lectures هندسة السكك الحديدية & Dr. Wal...
04 Rail Sleepers (Railway Engineering Lectures هندسة السكك الحديدية & Dr. Wal...
Recently uploaded
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
Recently uploaded (20)
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Civil Engineering Resume
- 1. Fgh Tanuj kumawat Civil Engineer Personal Info Social Work Experience 2018: RK CONSTRUCTION, HYDRABAD Education 2013-2017 2017-2018 2011-2012 2009-2010 Software Contact AutoCad (2005-2013) Staad Pro V8i (Series 4) Microsoft Office Interest -Bicycling -Music & Singing -Technology -Learning -Cricket -Reading Books -Youtube -Design
- 2. p