The document provides instructions for creating a light-up quiz folder with 10 steps: 1) Cut edges of folder and quiz sheet. 2) Punch holes along questions and answers. 3) Fold folder back and punch through front and back. 4) Flip folder and label questions and answers. 5) Draw lines connecting questions to answers. 6) Lay foil across to connect points. 7) Cover foil with tape. 8) Attach battery. 9) Attach wires and light. 10) Connect questions to answers and light should light up if correct.
4. Step 3
With the cover folded
back, punch holes
along side the
questions and
answers.
You’ll punch through
both the front and
back covers of the
question side and
Punched through only the back of the
Punched through both back only
front and back answer side.
5. Step 4
Turn the folder over.
On the back label the
answers and
questions. Remember
they are on reverse
sides because you’ve
flipped it over.
7. Step 6
Lay the foil flat across
Lay the foil flat across
Lay a foil strip from
a question to the
answer – do not
put it through the
holes
Lay the foil and the tape flat across
Lay the foil and the tape flat across
Step 7
Cover the foil strip
with masking tape
What would
happen if you
didn’t put down
tape after each
piece of foil lace?
8. Repeat Steps 6 and 7
Lay the foil and tape flat across
Lay the foil and tape flat across
until all of the
questions and answers
are connected