An electrical engineer with over 6 years of experience in MEP systems for buildings and hospitality projects. Skilled in project management from inception to completion including engineering design, construction, budgeting, and maintenance. Holds a B.Sc. in Electrical and Electronic Engineering and various safety and technical certifications. Has experience managing MEP implementation and maintenance for hotels, villas, and commercial buildings. Also has telecommunications experience installing and configuring mobile network sites. Seeks a position where he can utilize his electrical engineering and project management skills.
Chief maintenance engineering/Supervision & implementation on an Executive ME...Qahtan Adnan
* Regarding to my MEP works of Implementation, Finishing, Pre-opening and Operating Maintenance for a:-
1- 36 floor, +five star hotel, 256 rooms & full facilities.
2- 24,000 Square Meter Five star hotel, 135 rooms & facilities.
3- 20,000 Square Meter Villa’s with full facilities.
4- Six floors, 165 rooms/ Accommodation building.
5- Fifth floor building / Plant room for a hospital FMC.
6- Flat 500 (square Meter) /with full luxury facilities.
My briefly duties were:-
• Managing designs, researches, and analysis on a project by project and advice for the best to be implemented and maintain for future time.
• Prepare all drawings on site according to specifications.
• Proposal all the suggestion to make the project plan in easiest way to implemented.
• Study and planning to estimated costs for the projects.
• Managing project schedules and budgets, and following obtain permits for operations.
• Following up engineering calculations connection with field and office assignments.
• Investigate & follow up all problems and recommend the best solutions to be applied.
• Prepared and reviewed engineering plans, specifications required, project schedules time, designs, circuit diagrams, and estimates for construction and maintenance of projects Gradually with the sequence of the project.
• Daily provided technical support for system operations and maintenance.
• Maintained connection effective working relationships with field crews, contractors, vendors, outside agencies, the staff members.
• Prepare requests of proposals and evaluate tenders.
• Ensure that safety requirements and standards procedures are implemented.
• Following up all payment with venders.
High technical & managements experiences with Excellent relationships with customers, capable to attract the market’s attention to new projects and solutions through wide knowledge in the work field and high performance with a professional attitude.
Chief maintenance engineering/Supervision & implementation on an Executive ME...Qahtan Adnan
* Regarding to my MEP works of Implementation, Finishing, Pre-opening and Operating Maintenance for a:-
1- 36 floor, +five star hotel, 256 rooms & full facilities.
2- 24,000 Square Meter Five star hotel, 135 rooms & facilities.
3- 20,000 Square Meter Villa’s with full facilities.
4- Six floors, 165 rooms/ Accommodation building.
5- Fifth floor building / Plant room for a hospital FMC.
6- Flat 500 (square Meter) /with full luxury facilities.
My briefly duties were:-
• Managing designs, researches, and analysis on a project by project and advice for the best to be implemented and maintain for future time.
• Prepare all drawings on site according to specifications.
• Proposal all the suggestion to make the project plan in easiest way to implemented.
• Study and planning to estimated costs for the projects.
• Managing project schedules and budgets, and following obtain permits for operations.
• Following up engineering calculations connection with field and office assignments.
• Investigate & follow up all problems and recommend the best solutions to be applied.
• Prepared and reviewed engineering plans, specifications required, project schedules time, designs, circuit diagrams, and estimates for construction and maintenance of projects Gradually with the sequence of the project.
• Daily provided technical support for system operations and maintenance.
• Maintained connection effective working relationships with field crews, contractors, vendors, outside agencies, the staff members.
• Prepare requests of proposals and evaluate tenders.
• Ensure that safety requirements and standards procedures are implemented.
• Following up all payment with venders.
High technical & managements experiences with Excellent relationships with customers, capable to attract the market’s attention to new projects and solutions through wide knowledge in the work field and high performance with a professional attitude.
Dear Sir,
Please find attached my Resume for the above same; I'm particularly interested in this opening / position, which relates strongly to my 26 years of rich experience in Electrical Engineering & Commissioning onshore/offshore field.
I am now looking to take up roles in Electrical /Principle Engineering/ Commissioning / Project Management with an organization of repute. Of particular interest to me would be positions in Operations & Maintenance. I am open to assignments in India and abroad.
I am keen to join your firm due to its leading position in the industry, great organizational culture, spirit of innovation, professionalism to take challenges, organizational performance that it offers.
I feel that my skills and experience are appropriate for this position. It would be really grateful if you contact me to arrange an interview.
I appreciate your taking the time to review my credentials and experience. I am looking forward to a positive response.
I also have valid CompEX certificate if needed.
Thanks & Best Regards
Vaman Joshi
Adnan responsible for all aspects of the Resident engineer on site, receiving, and evaluating contractor bids; supervising construction progress and scheduling; starting up process systems/equipment or facilities for turning over to the owner's personnel. Supervises field staff and contractors on the site with responsibility for quality construction in accordance with plans and specifications. Also responsible for approval of change orders, invoices, and payment applications which may include final payment.
Dear Sir,
Please find attached my Resume for the above same; I'm particularly interested in this opening / position, which relates strongly to my 26 years of rich experience in Electrical Engineering & Commissioning onshore/offshore field.
I am now looking to take up roles in Electrical /Principle Engineering/ Commissioning / Project Management with an organization of repute. Of particular interest to me would be positions in Operations & Maintenance. I am open to assignments in India and abroad.
I am keen to join your firm due to its leading position in the industry, great organizational culture, spirit of innovation, professionalism to take challenges, organizational performance that it offers.
I feel that my skills and experience are appropriate for this position. It would be really grateful if you contact me to arrange an interview.
I appreciate your taking the time to review my credentials and experience. I am looking forward to a positive response.
I also have valid CompEX certificate if needed.
Thanks & Best Regards
Vaman Joshi
Adnan responsible for all aspects of the Resident engineer on site, receiving, and evaluating contractor bids; supervising construction progress and scheduling; starting up process systems/equipment or facilities for turning over to the owner's personnel. Supervises field staff and contractors on the site with responsibility for quality construction in accordance with plans and specifications. Also responsible for approval of change orders, invoices, and payment applications which may include final payment.
Plz,get attachment my c.v(ali el-atabany) electrical engineer last update2014Ali Omar
• Providing OSP technical knowledge and presentations, gathering customer requirements and translating them into a comprehensive solution. Works closely with sales managers, build customer relationship and prospects as a subject-matter expert to demonstrate how a proposed solution meets and exceeds customer requirements
• Design and Supervision of low voltage Distribution Networks and Telephone System (External and Internal Networks)
• Good Experience in electrical cables Installations L.V (Infrastructure).
I am extremely committed to as an electromechanical engineer/manager with the ability to take on responsibility , good communication skill, fast learner, able to work alone or as part of the team, able to throw myself whole –heartedly into project.
Since 1995, I have been working on industrial systems. But after 1996 have been dealing major international Project which factory , underground/metro construction projects. That is why my skills include ability to manage projects on factory, underground/metro, mass transit in all phases from planning to designing, construction and operation and asset managements(assembling, maintenance, breakdown etc.). Also recent achievements have included designed for many different type of stations electromechanical and rail systems which the supervision of the Rail Systems Contractor site installation activities at Maintenance Depot, both Stabling Yards, Stations, Tunnels, Elevated and At-Grade
Professional experience also includes acting as a leader or a flexible team member for all multi-disciplinary engineering works include short term contracts ,re- organized work to increase efficiency & productivity .
Finally I am a positive, well-motivated person who strives to encourage colleague and others who works with me.
Thank you,
Best regards,
• I have about four (4) years of experience in Electrical engineering field practice particularly in Electrical Design and Site Engineer for MEP projects of electrical system and contractor technical office.
• Capable of performing full distribution system design including Low & Medium Tension Networks, Emergency and Critical Load calculations studies, A/C loads, Plumbing & Fire Fighting loads, Switch Gear, Transformers, Emergency generator and U.P.S, Sub_ stations, Power fixtures, Sizing and routes of cables/conduits/cable trays and ladders, Short circuit, Voltage drop, Grounding & Lightning protection systems, Indoor-Outdoor Lighting fixtures, Landscape and Façade lighting.
Over 9 years of experience with various Telecommunication Companies of Fiber Optic experience (deployment, distribution networks, understanding of OFC theory and design, testing, troubleshoot fiber optic issues.) and passive infra of cell sites, Project Planning, Project coordination & Execution, Planning & Control, Quality Assurance, Technical Support, Expertise in Developing System & Procedures for Infrastructure Projects
An Electrical and Instrumentation Engineer with knowledge of developing, maintaining electrical systems and controlling
industrial equipment and instruments focusing on economy, safety, reliability, quality and sustainability. I would like to apply
my knowledge and ideas in the research field of Electrical and Instrumentation Engineering and work with dedication and
punctuality to bring out the best.
1. Dedicated electrical engineer with more than six years’ experience in
implementing & maintaining building MEP systems and managing all
aspects of projects’ life cycle & Hospitality, offering the following core
competencies:-
• Leading engineering to maintaining services building with hospitality and life
style facilities.
• Background in the principles and practices of MEP implementation projects,
engineering design and construction.
• Able to run engineering projects from inception to success.
• Excellent supervisory experience, including setting goals and objectives, project
development, planning and organization, budget monitoring and cost control.
B.sc. in Electrical and Electronic Engineering - University of Technology - Department of
Electronics and Communications.
IOSH Certificate for the Engineers, it is a British Co. for an international health and
safety training works at site and how to manage the Hazard.
Fire alarm, Firefighting, Evacuation & LPG system trainings (operating &
maintenance).
BMS, RMS, Dimmer light systems Trainings (operating & maintenance).
Swimming pool & fountain systems trainings (operating & maintenance).
I took a training (11-17/ 9 /2012) by Ericsson Company for TN (Traffic Node) it was
advanced training about the modems, installation, configuration and connection for
(NPU, MMU’s, LTU’s, ETU’s…etc.) and Alarms and the problem that we faced in the site
also adscription for DCN network.
CV
Qahtan Adnan Al obaidi
Mobile: 00964-770-534-5874
E-mail / qahtan.adnan@outlook.com
/ kahtanma@gmail.com
Achievement Certificate and training
Qualifications Summary
2. Certificate from NSN (Nokia Siemens Network) for a training (22-26/12/2011) in the
transmission Equipment (installation Microwave, configuration and do the alignment,
upgrade) for flexi Packet first mile 200, FM 200 SVR 2.0 and HUB 800 SVR 2.0 models.
I took training (5-12/ 6 /2011) in Korek sulaymaniyah by Ericsson Iraq on the RBS (radio
base station) that’s Model (6102, 6201), installation and the function of all equipment and
how to connected with it, and do the configuration and make it on air ...etc.
Certificate from (ICTC) 11/5/2010 Information and Communication Technology Center,
sponsored by University of Technology to my participation in computation for the gift
project and my project one of them.
Certificate of participation in Computer software’s training in May 2009, from University
of Technology, (computer center).
Certificate of Preparing leaders (8/July to 22/Sep./2008), it is a practical and theoretical
information and training in (leadership ART, general relation public speaking and
debates, personality training, protocol, democratic culture, modern communication skills,
secretary, internet, And English language).
* Regarding to my MEP works of Implementation, Finishing, Pre-opening and
Operating Maintenance for a:-
1- 36 floor, +five star hotel, 256 rooms & full facilities.
(Grand Millennium Sulaimani Hotel)
2- 24,000 Square Meter Five star hotel, 135 rooms & facilities.
(Kurdistan Millennium Hotel)
3- 20,000 Square Meter Villa’s with full facilities.
4- Six floors, 165 rooms/ Accommodation building.
5- Fifth floor building / Plant room for a hospital FMC.
6- Flat 500 (square Meter) /with full luxury facilities.
My briefly duties were through these six years:-
• Handling all aspects of pre-opening and opening processes i.e. installation of like Chillers,
Fire Fighting, BMS, Water Treatment Plant (RO Plant), Plumbing works, Electrical (HL-
LV Transformers, switch gear, MDB) ……etc, And all as build handover documents .
FIELD OF EXPERTISE:-
3. • Give assistant to General Manager to supervise the contracting companies like interior
designing work , rooms and public areas furnishing peoples and to give assistant for
manpower hiring etc.
• Preparing reports, memorandums, and letters, performing independent research and
preparing information for special projects, organizing and expediting the flow of work
through the department, maintaining department files and records, and performing other
duties as required.
• Troubleshooting field problems & Providing technical consultations.
• Encourage cross training in the department so as to wish the knowledge and prepare for
any situation.
• Conduct fire fighting training in conjunction with the civil defense department for the uses
of all kinds of extinguishers and evacuation plan and drill.
• Conduct regular inspection of maintenance and preventive maintenance set up schedules.
• Managing designs, researches, and analysis on a project by project and advice for the best
to be implemented and maintain for future time.
• Prepare all drawings on site according to specifications.
• Proposal all the suggestion to make the project plan in easiest way to implemented.
• Study and planning to estimated costs for the projects.
• Managing project schedules and budgets, and following obtain permits for operations.
• Following up engineering calculations connection with field and office assignments.
• Investigate & follow up all problems and recommend the best solutions to be applied.
• Prepared and reviewed engineering plans, specifications required, project schedules time,
designs, circuit diagrams, and estimates for construction and maintenance of projects
Gradually with the sequence of the project.
• Daily provided technical support for system operations and maintenance.
• Maintained connection effective working relationships with field crews, contractors,
vendors, outside agencies, the staff members.
• Prepare requests of proposals and evaluate tenders.
4. • Ensure that safety requirements and standards procedures are implemented.
• Following up all payment with venders.
* I have knowledge and high experience in installation, configuration and maintenance for
Ericsson equipment BTS [RBS2000’s version. And 6000’s version].that’s use
OMT(Operation and Maintenance Terminal) software. Also AMM (Access Module
Magazine) (2p,6p,20p) that’s use Traffic node mini link craft and also have experience to
solve the problems and alarms for this equipment’s....etc. ; also experience in NSN
transmission equipment (FM 200 and HUB 800) and NEC equipment Panasonic and (I
Panasonic).
* I have experience in PLC (programmable logic control, Deep Sea brand) and electrical
panels of the Generators.
* Using Internet, Emails, Good communication in work, also I am good in networks & IT
installation just like Nano station, Routers , LAN network, wireless network, DCN
network HUB….etc.
* I am very good in some of software’s jest like AutoCAD, Plan Swift, Microsoft, Workbench,
Math lap, SPSS, visual basic, C++…..Etc.
A) From 2011 till Now I working with Faruk Group (Zarya construction company.) it is
an construction company they have a lot of projects so I was responsible of working in
3 building below:-
1- FMC hotel (Millennium Kurdistan, Hotel & Spa) 135 rooms.
(https://www.tripadvisor.com/Hotel_Review-
g659508-d5310306-Reviews-
Millennium_Kurdistan_Hotel_Spa-
Sulaymaniyah_Sulaymaniyah_Province.html)
2- Six floor Accommodation building.
3- Five floor plant room building.
As an MEP Engineer my work as a supervisor at all MEP works and implementation
on required specifications and designs with contractor who was Turkish company
DATAILS OF MY WORKS
5. (AKTIF CO.) http://www.aktifelk.com.tr/ and the client was the (Millennium hotels
company) www.millenniumhotels.com.
After that we did the preopening and handover for whole hotel with one year
maintenance works for all the area.
B) In the same while Time that works in 2013 I had to make Finishing, Preopening,
and Handover & Operation Maintenance works for a:-
* 36 floors tower five star hotel 256 rooms (Grand millennium Hotel).
(https://www.millenniumhotels.com/en/sulaimani/grand-millennium-hotel-
sulaimani/)
Ps. Till now operation maintenance works is on
us.
C) At the same time I work to Implementation,
Finishing, Hand over 20,000 square meter special
Villa’s with full of luxury facilities.
Note: - The Villa was done and now I’m the responsible to manage
operating and maintenance of the villa and millennium Kurdistan hotel As a
Chief Engineer.
D) From 2014 till 2016 Also I finalize MEP work for a Flat 500 (square Meter) with
full of luxury facilities Implementation, Finishing and hand over.
6. All the Buildings above contain:-
Revolving restaurants, auditorium, concert hall, theater, 9 meeting rooms, bars and
shops.
And all the systems:-
1- Medium voltage & Low Voltage Generators.
2- HV-LV transformers.
3- HV - LV Switch gear.
4- Chiller 400 KW.
5- Gas, LPG & electric Boilers.
6- Low Currant systems (CCTV, Sound system, SMATV, Network, internet…..etc)
7- Fire alarm system.
8- LPG system.
9- BMS (building management system).
10- RMS.
11- UPS system, Emergency system.
------------------------------------------------------------------------------------------------
From 2010 until 2011 I worked in EMEK GROUP Company for communications in
Sulaymanyiah. Which took the implementation of 165 GSM sites from Korek company
(Ericsson equipment) for installation the towers sites from the beginning (35 site in
Kirkuk and 165 sites in sulaymaniah) so I have a high experience in Telecom and
power works, even in civil works. I worked as a supervisor on the contractors to do all
the installation works and design layout for all implementation work :-
A) For power (ATS,MDB,AC panel ,split installation, cable trays and Earthling system
deltas and wiring)
B) for Telecom (RBS, BBS, Alarms, DDF, GSM, AMM (2p, 6p, 20p) …etc) So I do
configuration and alignment for MW (microwave) and routing E1’s on Mini link
craft software; and make the sites on-air on OMT program [in Kirkuk make about
20 on-air for ver. 2216, 2116 cabin, in sulaymaniah make more than 50 site on air
for ver. 6102, 6201 Cabin] after that do the acceptance with Korek teams with
Telecom department.
In 2010 worked in al Shaty CO. in Baghdad that takes 15 sites from korek so I work as
site engineer with contractors to do the installation for power and Telecom work so I do
configuration and alignment for MW and routing E1’s and make the sites on air for ver.
2000’s cabin.
I worked in Unicef organization as leader and researcher. (In holiday between studying
time).
7. Worked at the 4points company as data entry on (SPSS) system. (In holiday between
studying time)
Worked in Al Sharq -Center Company as a researcher for Media and national and
human rights Research. (In holiday between studying time)
Worked in a private office for the repair and maintenance of computers and mobiles. (In
holiday between studying.
Name: Qahtan Adnan Jawad
Marital status: Married
Birth: 26/ 6 /1988
Language: Arabic is the mother language; English spoken and written are Excellent and Kurdish is
very good.
Mobile: - 009647705345874
Address: Now Living at Iraq – AS Sulaymaniayh – Kordsat ;
E-mail: qahtan.adnan@outlook.com; & kahtanma@gmail.com
Profile
Projects that we done and ongoing