This document is the syllabus for Chemistry 213B: Introductory Physical Chemistry I at McGill University. It outlines the course topics which include thermodynamics, kinetics, states of matter, and phase equilibria. It provides the course details such as meeting times, textbook, grading breakdown, and exam dates. It also includes a tentative lecture schedule listing the topics to be covered in each class.
This document provides an introduction to higher mathematics. It covers topics in logic, proofs, number theory, and functions. The introduction defines logical operations and formulas that are used to combine statements in mathematics. Logical operations allow complex statements to be built from simpler ones and include negation, conjunction, disjunction, and implication. A brief biography is provided for mathematicians mentioned in the text, such as George Boole, who contributed to the study and development of logic.
The document contains solutions to problems from the 51st International Mathematical Olympiad held in Astana, Kazakhstan in 2010. It includes 8 problems from Algebra, 7 problems from Combinatorics, 7 problems from Geometry, and 6 problems from Number Theory, along with their corresponding solutions. The problems and solutions are kept confidential until the 2011 IMO.
Discrete Mathematics - Mathematics For Computer ScienceRam Sagar Mourya
This document is a table of contents for a textbook on mathematics for computer science. It lists 10 chapters that cover topics like proofs, induction, number theory, graph theory, relations, and sums/approximations. Each chapter is divided into multiple sections that delve deeper into the chapter topic, with descriptive section titles providing a sense of what each chapter covers at a high level.
This document is an introduction to plasma physics that covers several key topics:
1. It defines plasma as a gas of charged particles and discusses the conditions needed for a plasma state, including debye shielding and plasma parameters.
2. It describes different models for plasma description including fluid, MHD, and two-fluid models. It also covers continuity, Euler, and state equations.
3. It discusses MHD equilibria and waves, including Alfven and magnetosonic modes.
4. It examines MHD discontinuities and shocks.
5. It presents the two-fluid description and generalized Ohm's law.
6. It explores waves in dispers
Business Mathematics Code 1429
BA Code 1429
AIOU Islamabad BA General Book
BA General Allama Iqbal Open University Course Code 1429 Business Mathematics
This document outlines the contents of a graduate-level quantum mechanics course. It introduces the major sources consulted in developing the course material and provides an overview of the fundamental concepts covered, including the breakdown of classical physics, polarization of photons, ket and bra spaces, operators, eigenvalues and eigenvectors, observables, measurements, expectation values, and more. The document then delves into specific topics like position and momentum, quantum dynamics, angular momentum, approximation methods, scattering theory and others.
This document contains notes from a trigonometry course. It includes 10 chapters that cover topics like geometric foundations, the Pythagorean theorem, angle measurement, trigonometric functions, graphing trigonometric functions, inverse trigonometric functions, and working with trigonometric identities. Each chapter also includes supplemental problems for additional practice.
This document contains notes from a trigonometry class taught by Steven Butler at Brigham Young University in Fall 2002. It is divided into 9 chapters that cover topics such as geometric foundations, the Pythagorean theorem, angle measurement, trigonometry with right triangles, trigonometry with circles, graphing trigonometric functions, inverse trigonometric functions, and working with trigonometric identities. Each chapter contains sections that explain key concepts and include supplemental practice problems.
This document provides an introduction to higher mathematics. It covers topics in logic, proofs, number theory, and functions. The introduction defines logical operations and formulas that are used to combine statements in mathematics. Logical operations allow complex statements to be built from simpler ones and include negation, conjunction, disjunction, and implication. A brief biography is provided for mathematicians mentioned in the text, such as George Boole, who contributed to the study and development of logic.
The document contains solutions to problems from the 51st International Mathematical Olympiad held in Astana, Kazakhstan in 2010. It includes 8 problems from Algebra, 7 problems from Combinatorics, 7 problems from Geometry, and 6 problems from Number Theory, along with their corresponding solutions. The problems and solutions are kept confidential until the 2011 IMO.
Discrete Mathematics - Mathematics For Computer ScienceRam Sagar Mourya
This document is a table of contents for a textbook on mathematics for computer science. It lists 10 chapters that cover topics like proofs, induction, number theory, graph theory, relations, and sums/approximations. Each chapter is divided into multiple sections that delve deeper into the chapter topic, with descriptive section titles providing a sense of what each chapter covers at a high level.
This document is an introduction to plasma physics that covers several key topics:
1. It defines plasma as a gas of charged particles and discusses the conditions needed for a plasma state, including debye shielding and plasma parameters.
2. It describes different models for plasma description including fluid, MHD, and two-fluid models. It also covers continuity, Euler, and state equations.
3. It discusses MHD equilibria and waves, including Alfven and magnetosonic modes.
4. It examines MHD discontinuities and shocks.
5. It presents the two-fluid description and generalized Ohm's law.
6. It explores waves in dispers
Business Mathematics Code 1429
BA Code 1429
AIOU Islamabad BA General Book
BA General Allama Iqbal Open University Course Code 1429 Business Mathematics
This document outlines the contents of a graduate-level quantum mechanics course. It introduces the major sources consulted in developing the course material and provides an overview of the fundamental concepts covered, including the breakdown of classical physics, polarization of photons, ket and bra spaces, operators, eigenvalues and eigenvectors, observables, measurements, expectation values, and more. The document then delves into specific topics like position and momentum, quantum dynamics, angular momentum, approximation methods, scattering theory and others.
This document contains notes from a trigonometry course. It includes 10 chapters that cover topics like geometric foundations, the Pythagorean theorem, angle measurement, trigonometric functions, graphing trigonometric functions, inverse trigonometric functions, and working with trigonometric identities. Each chapter also includes supplemental problems for additional practice.
This document contains notes from a trigonometry class taught by Steven Butler at Brigham Young University in Fall 2002. It is divided into 9 chapters that cover topics such as geometric foundations, the Pythagorean theorem, angle measurement, trigonometry with right triangles, trigonometry with circles, graphing trigonometric functions, inverse trigonometric functions, and working with trigonometric identities. Each chapter contains sections that explain key concepts and include supplemental practice problems.
This document presents a B.Sc. project on the mathematics of financial derivatives. It introduces various financial instruments and establishes the economic and mathematical background needed to understand option pricing models. It then derives the Black-Scholes, Cox-Ross-Rubinstein binomial tree, and Monte Carlo models for pricing options. It also analyzes option sensitivity and compares the different models. The project was supervised by Dr. F.E. Tomkinson and submitted to the University of Surrey to fulfill the requirements of a B.Sc. degree.
This document is a dissertation submitted by Jared Michael Maruskin in partial fulfillment of the requirements for a Doctor of Philosophy in Applied and Interdisciplinary Mathematics at the University of Michigan in 2008. The dissertation contains four chapters that study dynamical systems and nonholonomic constraints from geometric and variational perspectives. The dissertation examines topics such as symplectic subvolumes, Delaunay variables, orbit determination, and the eccentric frame decomposition for central force fields.
This document is a preliminary draft of a textbook on classical mechanics. It includes 8 chapters that cover topics such as particle kinematics, Lagrange's and Hamilton's equations, central forces, rigid body motion, small oscillations, Hamilton's equations, perturbation theory, and field theory. The author notes that some chapters, such as chapters 6 and 7, need more work, and that chapter 8 is incomplete. Exercises are also still needed for some of the later chapters. This version is not considered a fully published edition.
This document describes subspace methods for solving linear, nonlinear, and eigen problems. It introduces nested Krylov methods that preserve orthogonality during inner iterations. It presents the BiCGstab algorithm for solving linear systems and describes its theoretical justification and implementation details. It also discusses enhanced implementations of BiCGstab and generalized conjugate gradient squared methods. Finally, it describes Jacobi-Davidson style QR and QZ algorithms for solving standard and generalized eigenproblems.
This document is a textbook on elementary linear algebra by K.R. Matthews from the University of Queensland. It contains 8 chapters that cover topics in linear equations, matrices, subspaces, determinants, complex numbers, eigenvalues and eigenvectors, identifying second degree equations, and three-dimensional geometry. Each chapter includes examples and problems related to the covered material.
This document is John Reed Richards' doctoral dissertation from the University of Delaware submitted in 1994. It examines the fluid mechanics of liquid-liquid systems through both numerical modeling and experimental analysis. The dissertation contains 6 chapters that study various phenomena involving liquid-liquid interfaces, including static interface shapes with volume constraints, steady laminar liquid-liquid jet flows at high Reynolds numbers, dynamic breakup of liquid-liquid jets, and drop formation in liquid-liquid systems before and after jetting. It was approved by Richards' dissertation committee as meeting the requirements for a PhD in Chemical Engineering.
The document describes discrete Markov chains. A discrete Markov chain is a stochastic process that takes on countably many states, where the probability of moving to the next state depends only on the current state, not on the sequence of events that preceded it. This is known as the Markov property. The document defines discrete Markov chains mathematically and provides some basic properties, including the Markov property. It also gives examples of discrete Markov chains and how they can be specified by their transition probabilities between states.
This document provides an outline for the course MBA 604 Introduction to Probability and Statistics. It lists 11 topics that will be covered in the course, including data analysis, probability, random variables, sampling distributions, estimation, hypothesis testing, regression, and analysis of variance. The course is taught by Muhammad El-Taha in the Department of Mathematics and Statistics at the University of Southern Maine.
A Three Dimensional Vortex Particle-Panel Code For Modeling PropeJacob Calabretta
This thesis presents a new method for modeling propeller-airframe interaction using a three dimensional vortex particle-panel code. The method combines a flexible aerodynamic panel code with a pseudo-steady slipstream model that discretizes rotational effects onto vortex particle point elements. Verification and validation studies were conducted to ensure an accurate model. The method provides a useful tool for conceptual aircraft design by allowing rapid testing of configurations without requiring volume grids. The thesis describes the development of the new method and presents simulations of several configurations to demonstrate its capabilities.
This document is a thesis submitted by Victor Arulchandran for the degree of Doctor of Philosophy at Brunel University. The thesis investigates free vibrations of thin elastic circular cylindrical panels localized near the edge using the Kirchhoff-Love theory of shells. Specifically, it analyzes:
1) Bending, extensional, and super-low frequency vibrations of a semi-infinite cylindrical shell.
2) The effects of varying panel thickness, wavelength, Poisson's ratio, and circumferential length.
3) Bending, extensional, and super-low frequency vibrations localized at the interface of two joined cylindrical shells.
Asymptotic solutions are derived and computational methods are
Elementary mathematical logic stephen g. simpsonmanrak
The document contains lecture notes on mathematical logic. It introduces propositional and predicate calculus, including definitions of formulas, logical connectives, truth assignments, satisfiability, and logical equivalence. It also describes tableau and tree methods for determining validity, and completeness and compactness theorems. The notes are intended for introductory logic courses offered at Penn State University.
This document is a course syllabus for General Physics I: Classical Mechanics taught by Dr. D.G. Simpson at Prince George's Community College. It outlines the contents of the course, which includes chapters on units, kinematics, vectors, forces, Newton's laws of motion, work, and other topics in classical mechanics. The syllabus provides learning objectives for each chapter and references textbook chapters for further reading.
This document provides an introduction and overview of a probability course. It outlines the topics that will be covered, including classical probability, combinatorics, discrete and continuous random variables, independence, conditional probability, and distributions like the normal distribution. The notes are intended to be a concise 4 pages per lecture with examples and non-examinable interesting topics. Students are encouraged to read recommended textbooks and lecture notes as well as engage in problem solving to master the concepts.
Introduction_to modern algebra David_Joycevorticidad
This document is an introduction to modern algebra by David Joyce. It covers topics in fields, rings, groups and number theory. The author dedicates the book to his late friend and colleague Arthur Chou, who encouraged him to write it. The book contains chapters on fields, rings, groups and other algebraic structures and concepts such as isomorphisms, homomorphisms, ordered fields, and finite fields.
This document provides an introduction to integral calculus and demonstrates how to perform integral calculations using the computer algebra system Sage. It covers key integral calculus concepts such as the definition of the integral, Riemann sums, the Fundamental Theorem of Calculus, and techniques for evaluating integrals such as substitution, integration by parts, and trigonometric substitutions. It also discusses applications of integrals to computing areas, volumes, arc lengths, averages, and centers of mass. The document is intended as a preliminary version of an instructional text on integral calculus using Sage.
A Framework for Understanding and Controlling Batch Cooling CrystallizationDaniel Griffin
This thesis presents Daniel Griffin's work on developing frameworks for understanding and controlling batch cooling crystallization. It introduces two frameworks - the population balance (PB) framework which describes crystallization using crystal size distributions and equations, and the mass-count (MC) framework which depicts crystallization as movement in a mass-count space. Experimental studies on darapskite and paracetamol systems were used to develop qualitative and quantitative models of dynamics in the MC space. Finally, both rule-based and model-based feedback control schemes were developed and tested to control crystal size using the MC framework.
This document is a free online calculus textbook. It was created by David Guichard and others and submitted to an open textbook initiative in California. The textbook is updated occasionally by the authors to correct errors and add new material. It covers topics in analytic geometry, limits, derivatives, integrals, and infinite series and is made freely available under a Creative Commons license.
Thermal and statistical physics h. gould, j. tobochnik-1Petrus Bahy
This document provides an overview of thermodynamic concepts and statistical mechanics. It begins with introducing qualitative observations of microscopic behavior and macroscopic measurements like pressure and temperature. It discusses the need for statistical approaches when dealing with large numbers of particles. Key concepts are then explained, including thermodynamic equilibrium, the laws of thermodynamics, temperature, pressure, work, and entropy. Statistical distributions and the connection between statistical mechanics and thermodynamics are outlined. Specific applications to magnetic systems and models like the Ising model are also examined.
Xin-She Yang - Introductory Mathematics for Earth Scientists -Dunedin Academi...Aditya Singh
This document provides an introduction to functions including cubic, quadratic, and modulus functions. It discusses calculating the average density of Earth using given values for Earth's mass and radius to determine volume. Graphs are presented of cubic and modulus functions.
This document provides lecture notes for a course on differential equations. It includes a preface and 13 chapters covering topics such as first-order differential equations, second-order differential equations, systems of equations, nonlinear differential equations, and partial differential equations. The preface describes the purpose of the notes, sources of adapted material, and links for additional resources. An overview of relevant calculus concepts is provided in Chapter 0 as a mathematical review.
J.M. Smith, Hendrick Van Ness, Michael Abbott, Mark Swihart - Introduction to...HEMAMALINIKANASAN
This document is the table of contents for the 8th edition of the textbook "Introduction to Chemical Engineering Thermodynamics" by J.M. Smith, H.C. Van Ness, M.M. Abbott, and M.T. Swihart. The textbook covers fundamental concepts in chemical engineering thermodynamics across 10 chapters, including the first and second laws of thermodynamics, properties of pure fluids and mixtures, heat effects, and entropy. The table of contents provides an overview of the topics and subtopics covered in each chapter.
J.M. Smith, Hendrick Van Ness, Michael Abbott, Mark Swihart - Introduction to...HEMAMALINIKANASAN
This document is the table of contents for the 8th edition of the textbook "Introduction to Chemical Engineering Thermodynamics" by J.M. Smith, H.C. Van Ness, M.M. Abbott, and M.T. Swihart. The textbook covers fundamental concepts in chemical engineering thermodynamics across 10 chapters, including the first and second laws of thermodynamics, properties of pure fluids and mixtures, heat effects, and entropy. The table of contents provides an overview of the topics and subtopics covered in each chapter.
This document presents a B.Sc. project on the mathematics of financial derivatives. It introduces various financial instruments and establishes the economic and mathematical background needed to understand option pricing models. It then derives the Black-Scholes, Cox-Ross-Rubinstein binomial tree, and Monte Carlo models for pricing options. It also analyzes option sensitivity and compares the different models. The project was supervised by Dr. F.E. Tomkinson and submitted to the University of Surrey to fulfill the requirements of a B.Sc. degree.
This document is a dissertation submitted by Jared Michael Maruskin in partial fulfillment of the requirements for a Doctor of Philosophy in Applied and Interdisciplinary Mathematics at the University of Michigan in 2008. The dissertation contains four chapters that study dynamical systems and nonholonomic constraints from geometric and variational perspectives. The dissertation examines topics such as symplectic subvolumes, Delaunay variables, orbit determination, and the eccentric frame decomposition for central force fields.
This document is a preliminary draft of a textbook on classical mechanics. It includes 8 chapters that cover topics such as particle kinematics, Lagrange's and Hamilton's equations, central forces, rigid body motion, small oscillations, Hamilton's equations, perturbation theory, and field theory. The author notes that some chapters, such as chapters 6 and 7, need more work, and that chapter 8 is incomplete. Exercises are also still needed for some of the later chapters. This version is not considered a fully published edition.
This document describes subspace methods for solving linear, nonlinear, and eigen problems. It introduces nested Krylov methods that preserve orthogonality during inner iterations. It presents the BiCGstab algorithm for solving linear systems and describes its theoretical justification and implementation details. It also discusses enhanced implementations of BiCGstab and generalized conjugate gradient squared methods. Finally, it describes Jacobi-Davidson style QR and QZ algorithms for solving standard and generalized eigenproblems.
This document is a textbook on elementary linear algebra by K.R. Matthews from the University of Queensland. It contains 8 chapters that cover topics in linear equations, matrices, subspaces, determinants, complex numbers, eigenvalues and eigenvectors, identifying second degree equations, and three-dimensional geometry. Each chapter includes examples and problems related to the covered material.
This document is John Reed Richards' doctoral dissertation from the University of Delaware submitted in 1994. It examines the fluid mechanics of liquid-liquid systems through both numerical modeling and experimental analysis. The dissertation contains 6 chapters that study various phenomena involving liquid-liquid interfaces, including static interface shapes with volume constraints, steady laminar liquid-liquid jet flows at high Reynolds numbers, dynamic breakup of liquid-liquid jets, and drop formation in liquid-liquid systems before and after jetting. It was approved by Richards' dissertation committee as meeting the requirements for a PhD in Chemical Engineering.
The document describes discrete Markov chains. A discrete Markov chain is a stochastic process that takes on countably many states, where the probability of moving to the next state depends only on the current state, not on the sequence of events that preceded it. This is known as the Markov property. The document defines discrete Markov chains mathematically and provides some basic properties, including the Markov property. It also gives examples of discrete Markov chains and how they can be specified by their transition probabilities between states.
This document provides an outline for the course MBA 604 Introduction to Probability and Statistics. It lists 11 topics that will be covered in the course, including data analysis, probability, random variables, sampling distributions, estimation, hypothesis testing, regression, and analysis of variance. The course is taught by Muhammad El-Taha in the Department of Mathematics and Statistics at the University of Southern Maine.
A Three Dimensional Vortex Particle-Panel Code For Modeling PropeJacob Calabretta
This thesis presents a new method for modeling propeller-airframe interaction using a three dimensional vortex particle-panel code. The method combines a flexible aerodynamic panel code with a pseudo-steady slipstream model that discretizes rotational effects onto vortex particle point elements. Verification and validation studies were conducted to ensure an accurate model. The method provides a useful tool for conceptual aircraft design by allowing rapid testing of configurations without requiring volume grids. The thesis describes the development of the new method and presents simulations of several configurations to demonstrate its capabilities.
This document is a thesis submitted by Victor Arulchandran for the degree of Doctor of Philosophy at Brunel University. The thesis investigates free vibrations of thin elastic circular cylindrical panels localized near the edge using the Kirchhoff-Love theory of shells. Specifically, it analyzes:
1) Bending, extensional, and super-low frequency vibrations of a semi-infinite cylindrical shell.
2) The effects of varying panel thickness, wavelength, Poisson's ratio, and circumferential length.
3) Bending, extensional, and super-low frequency vibrations localized at the interface of two joined cylindrical shells.
Asymptotic solutions are derived and computational methods are
Elementary mathematical logic stephen g. simpsonmanrak
The document contains lecture notes on mathematical logic. It introduces propositional and predicate calculus, including definitions of formulas, logical connectives, truth assignments, satisfiability, and logical equivalence. It also describes tableau and tree methods for determining validity, and completeness and compactness theorems. The notes are intended for introductory logic courses offered at Penn State University.
This document is a course syllabus for General Physics I: Classical Mechanics taught by Dr. D.G. Simpson at Prince George's Community College. It outlines the contents of the course, which includes chapters on units, kinematics, vectors, forces, Newton's laws of motion, work, and other topics in classical mechanics. The syllabus provides learning objectives for each chapter and references textbook chapters for further reading.
This document provides an introduction and overview of a probability course. It outlines the topics that will be covered, including classical probability, combinatorics, discrete and continuous random variables, independence, conditional probability, and distributions like the normal distribution. The notes are intended to be a concise 4 pages per lecture with examples and non-examinable interesting topics. Students are encouraged to read recommended textbooks and lecture notes as well as engage in problem solving to master the concepts.
Introduction_to modern algebra David_Joycevorticidad
This document is an introduction to modern algebra by David Joyce. It covers topics in fields, rings, groups and number theory. The author dedicates the book to his late friend and colleague Arthur Chou, who encouraged him to write it. The book contains chapters on fields, rings, groups and other algebraic structures and concepts such as isomorphisms, homomorphisms, ordered fields, and finite fields.
This document provides an introduction to integral calculus and demonstrates how to perform integral calculations using the computer algebra system Sage. It covers key integral calculus concepts such as the definition of the integral, Riemann sums, the Fundamental Theorem of Calculus, and techniques for evaluating integrals such as substitution, integration by parts, and trigonometric substitutions. It also discusses applications of integrals to computing areas, volumes, arc lengths, averages, and centers of mass. The document is intended as a preliminary version of an instructional text on integral calculus using Sage.
A Framework for Understanding and Controlling Batch Cooling CrystallizationDaniel Griffin
This thesis presents Daniel Griffin's work on developing frameworks for understanding and controlling batch cooling crystallization. It introduces two frameworks - the population balance (PB) framework which describes crystallization using crystal size distributions and equations, and the mass-count (MC) framework which depicts crystallization as movement in a mass-count space. Experimental studies on darapskite and paracetamol systems were used to develop qualitative and quantitative models of dynamics in the MC space. Finally, both rule-based and model-based feedback control schemes were developed and tested to control crystal size using the MC framework.
This document is a free online calculus textbook. It was created by David Guichard and others and submitted to an open textbook initiative in California. The textbook is updated occasionally by the authors to correct errors and add new material. It covers topics in analytic geometry, limits, derivatives, integrals, and infinite series and is made freely available under a Creative Commons license.
Thermal and statistical physics h. gould, j. tobochnik-1Petrus Bahy
This document provides an overview of thermodynamic concepts and statistical mechanics. It begins with introducing qualitative observations of microscopic behavior and macroscopic measurements like pressure and temperature. It discusses the need for statistical approaches when dealing with large numbers of particles. Key concepts are then explained, including thermodynamic equilibrium, the laws of thermodynamics, temperature, pressure, work, and entropy. Statistical distributions and the connection between statistical mechanics and thermodynamics are outlined. Specific applications to magnetic systems and models like the Ising model are also examined.
Xin-She Yang - Introductory Mathematics for Earth Scientists -Dunedin Academi...Aditya Singh
This document provides an introduction to functions including cubic, quadratic, and modulus functions. It discusses calculating the average density of Earth using given values for Earth's mass and radius to determine volume. Graphs are presented of cubic and modulus functions.
This document provides lecture notes for a course on differential equations. It includes a preface and 13 chapters covering topics such as first-order differential equations, second-order differential equations, systems of equations, nonlinear differential equations, and partial differential equations. The preface describes the purpose of the notes, sources of adapted material, and links for additional resources. An overview of relevant calculus concepts is provided in Chapter 0 as a mathematical review.
J.M. Smith, Hendrick Van Ness, Michael Abbott, Mark Swihart - Introduction to...HEMAMALINIKANASAN
This document is the table of contents for the 8th edition of the textbook "Introduction to Chemical Engineering Thermodynamics" by J.M. Smith, H.C. Van Ness, M.M. Abbott, and M.T. Swihart. The textbook covers fundamental concepts in chemical engineering thermodynamics across 10 chapters, including the first and second laws of thermodynamics, properties of pure fluids and mixtures, heat effects, and entropy. The table of contents provides an overview of the topics and subtopics covered in each chapter.
J.M. Smith, Hendrick Van Ness, Michael Abbott, Mark Swihart - Introduction to...HEMAMALINIKANASAN
This document is the table of contents for the 8th edition of the textbook "Introduction to Chemical Engineering Thermodynamics" by J.M. Smith, H.C. Van Ness, M.M. Abbott, and M.T. Swihart. The textbook covers fundamental concepts in chemical engineering thermodynamics across 10 chapters, including the first and second laws of thermodynamics, properties of pure fluids and mixtures, heat effects, and entropy. The table of contents provides an overview of the topics and subtopics covered in each chapter.
Partial differential equations, graduate level problems and solutions by igor...Julio Banks
The physical world is driving by the laws of mathematics, more specifically PDE (Partial Differential Equations). FEA (Finite Element Analysis) and CFD (Computation Fluid Dynamics) are the numerical methods utilized to model physical events described by PDEs.
This document provides a revision history for "Lessons In Industrial Instrumentation" by Tony R. Kuphaldt. It details 14 versions of the document released between July 2008 and September 2010. Each new version includes minor updates and corrections. The document is licensed under the Creative Commons Attribution 3.0 United States License, which allows free copying, distribution, and modification of the work.
This document provides an overview of quantum mechanics concepts and applications. It begins with a historical introduction to the origins of quantum physics, including experiments demonstrating the particle and wave nature of light and matter. It then covers the mathematical tools of quantum mechanics, such as Hilbert spaces, operators, and Dirac notation. Finally, it discusses the postulates of quantum mechanics, including the state of a quantum system, observables, measurement, time evolution, and symmetries. The document aims to provide a comprehensive foundation for understanding quantum mechanics.
The Cellular Automaton Interpretation of Quantum MechanicsHunter Swart
This document provides an overview of Gerard 't Hooft's Cellular Automaton Interpretation (CAI) of quantum mechanics. The CAI proposes that quantum mechanics can be viewed as a tool for analyzing systems that are fundamentally classical and deterministic in nature. These classical systems take the form of time-reversible cellular automata that evolve deterministically according to local update rules. The CAI aims to resolve issues like the measurement problem by providing an ontological model underlying quantum mechanics without invoking probabilities or collapsing wavefunctions.
This document provides an overview of a quantum mechanics course taught by Martin Plenio at Imperial College in 2002. The course covers mathematical foundations of quantum mechanics, quantum measurements, dynamics and symmetries, and approximation methods. It is divided into two parts, with the first part covering core topics in quantum mechanics and the second part focusing on quantum information processing and related topics. The document provides chapter outlines and section headings for the material to be covered.
This document is a table of contents for a textbook on mathematics for computer science. It lists 10 chapters that cover topics such as proofs, induction, number theory, graph theory, relations, and sums/approximations. Each chapter is divided into multiple sections that delve deeper into the chapter topic. For example, Chapter 1 discusses propositions, axioms, logical deductions and provides examples of proofs; Chapter 2 covers induction and uses it to prove theorems.
This document is the contents page for a CK-12 physics workbook. It lists the chapter titles and topics covered in the workbook. CK-12 Foundation is a nonprofit organization that creates open educational resources to reduce textbook costs. It pioneers web-based and customizable textbooks called FlexBooks that can be printed, modified, and shared freely. The workbook covers topics in physics from scientific inquiry to circuits.
This thesis uses molecular dynamics simulations to study the elastic and failure properties of methane hydrates. The author employs the TIP4P/Ice water model and OPLS united atom methane model. Simulations identify methane hydrates as brittle materials with a fracture toughness of around 0.06 MPa√m. Cracks are found to initiate through slow dissociation of the hydrate surface at flaws, followed by rapid crack propagation. Methane is immediately released upon fracture while water molecules remain attached to crack walls. The work provides initial insights into fracture of methane hydrates through molecular modeling.
Solar Energy Equipment: Design of a solar plant for a buildingPietro Galli
This document describes the design of a solar energy system for domestic hot water production in a multi-family residential building in Turin, Italy. It includes preliminary analyses to determine the building characteristics, hot water demand, solar irradiance potential, and sizing of system components like the hot water storage tank. Thermal and energy analyses are presented for components such as solar collectors, heat exchangers, the storage tank, and gas boiler. The document also covers technical design considerations for heat transfer through the solar panel and temperature profiles of thermal fluids in the system pipes.
This document discusses dualities in physics and proves a duality between topological defects and Q-balls. It introduces important dualities like AdS/CFT and T-duality. Topological defects can form via the Kibble mechanism during cosmological phase transitions and may help explain problems like monopoles. Q-balls are non-topological solitons that may exist in theories of dark matter and baryogenesis. The document proves a classical duality between static complex kinks, which are topological defects, and stationary 1+1 dimensional Q-balls, with an interchange of topological charge and Noether charge.
This document provides an introduction to wavelets and their applications. It includes chapters on the mathematical framework of wavelets, fast wavelet algorithms, common wavelet families, and designing wavelets. The chapters cover topics such as continuous and discrete wavelet transforms, orthonormal and biorthogonal wavelet bases, fast wavelet transforms, families like Daubechies and Meyer wavelets, and constructing new wavelets. Examples throughout illustrate wavelet analysis of signals and images.
Here are a few key points about laws and dimensionless laws:
- A law is an equation that relates physical quantities and describes a physical phenomenon. It depends on variables with specific dimensions.
- The dimensions of each variable are specified by a dimension matrix, which shows how the fundamental dimensions (like length, mass, time) combine to form the dimensions of each variable.
- A dimensionless law is one where all the terms are dimensionless, meaning the dimensions cancel out. This occurs when the variables are related in such a way that their dimensions are proportional.
- Dimensional analysis and identifying dimensionless groups is useful for developing and simplifying mathematical models of physical systems. Dimensionless laws allow models to be scaled up
This thesis provides a nonstationary statistical analysis of annual maximum temperature records to evaluate global warming. It demonstrates that a nonstationary extreme value Weibull model with a linear trend in the location parameter best explains the data among various parametric and nonparametric models. However, other modeling techniques using splines in a generalized additive model previously showed that the trend in annual maxima is not simultaneously significant over time. The thesis develops theoretical backgrounds on state-of-the-art extreme value analysis methods and presents their careful application in a reusable R package and Shiny application.
This document contains lecture notes for a macroeconomics course taught by John C. Driscoll at Brown University. The notes are organized into 5 chapters that cover major topics in macroeconomics, including money and prices, nominal rigidities and economic fluctuations, macroeconomic policy, investment, and unemployment. Each chapter is further divided into sections that delve deeper into the sub-topics. The notes provide definitions, theoretical frameworks, empirical evidence, and problems for each macroeconomic concept discussed.
This document provides lecture notes on macroeconomics topics including money and prices, nominal rigidities and economic fluctuations, macroeconomic policy, investment, and unemployment. The notes are intended to closely follow lectures given by Professor John Driscoll at Brown University. Various macroeconomic models and theories are presented across different chapters, with an emphasis on explaining trends and fluctuations in key variables like output, unemployment, and inflation over time.
Similar to Chemical Energetics_Physical chemistry (20)
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectorsDianaGray10
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
Must Know Postgres Extension for DBA and Developer during MigrationMydbops
Mydbops Opensource Database Meetup 16
Topic: Must-Know PostgreSQL Extensions for Developers and DBAs During Migration
Speaker: Deepak Mahto, Founder of DataCloudGaze Consulting
Date & Time: 8th June | 10 AM - 1 PM IST
Venue: Bangalore International Centre, Bangalore
Abstract: Discover how PostgreSQL extensions can be your secret weapon! This talk explores how key extensions enhance database capabilities and streamline the migration process for users moving from other relational databases like Oracle.
Key Takeaways:
* Learn about crucial extensions like oracle_fdw, pgtt, and pg_audit that ease migration complexities.
* Gain valuable strategies for implementing these extensions in PostgreSQL to achieve license freedom.
* Discover how these key extensions can empower both developers and DBAs during the migration process.
* Don't miss this chance to gain practical knowledge from an industry expert and stay updated on the latest open-source database trends.
Mydbops Managed Services specializes in taking the pain out of database management while optimizing performance. Since 2015, we have been providing top-notch support and assistance for the top three open-source databases: MySQL, MongoDB, and PostgreSQL.
Our team offers a wide range of services, including assistance, support, consulting, 24/7 operations, and expertise in all relevant technologies. We help organizations improve their database's performance, scalability, efficiency, and availability.
Contact us: info@mydbops.com
Visit: https://www.mydbops.com/
Follow us on LinkedIn: https://in.linkedin.com/company/mydbops
For more details and updates, please follow up the below links.
Meetup Page : https://www.meetup.com/mydbops-databa...
Twitter: https://twitter.com/mydbopsofficial
Blogs: https://www.mydbops.com/blog/
Facebook(Meta): https://www.facebook.com/mydbops/
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
inQuba Webinar Mastering Customer Journey Management with Dr Graham HillLizaNolte
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
What is an RPA CoE? Session 1 – CoE VisionDianaGray10
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
"Scaling RAG Applications to serve millions of users", Kevin GoedeckeFwdays
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
High performance Serverless Java on AWS- GoTo Amsterdam 2024Vadym Kazulkin
Java is for many years one of the most popular programming languages, but it used to have hard times in the Serverless community. Java is known for its high cold start times and high memory footprint, comparing to other programming languages like Node.js and Python. In this talk I'll look at the general best practices and techniques we can use to decrease memory consumption, cold start times for Java Serverless development on AWS including GraalVM (Native Image) and AWS own offering SnapStart based on Firecracker microVM snapshot and restore and CRaC (Coordinated Restore at Checkpoint) runtime hooks. I'll also provide a lot of benchmarking on Lambda functions trying out various deployment package sizes, Lambda memory settings, Java compilation options and HTTP (a)synchronous clients and measure their impact on cold and warm start times.
Northern Engraving | Nameplate Manufacturing Process - 2024Northern Engraving
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...Jason Yip
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
Main news related to the CCS TSI 2023 (2023/1695)Jakub Marek
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.
2. -2-
All rights reserved. In accordance with Canadian Copyright Law, reproduction of this material, in whole or
in part, without the prior written consent the author is strictly prohibitied.
3. All truths are easy to understand once they are discovered; the point is to discover
them.
Philosophy is written in this grand book-I mean the universe-which stands contin-
ually open to our gaze, but it cannot be understood unless one first learns to com-
prehend the language and interpret the characters in which it is written. It is writ-
ten in the language of mathematics, and its characters are triangles, circles, and
other geometrical figures, without which it is humanly impossible to understand a
single word of it.
Opere Il Saggiatore
Galileo Galilei (1564 - 1642)
4. -2-
The Founders of Thermodynamics
Joule
Clausius
Maxwell
Carnot
Kelvin
Gibbs
5. -3-
Table of Contents
1. General Information . . . . . . . . . . . . . . . . . . . . . . 5
2. Kubo’s Divertissements . . . . . . . . . . . . . . . . . . . . . 8
2.1. Divertissement 1: Founders of the first law of thermodynamics . . . . . . . . 8
2.2. Divertissement 2: Why do we have winter heating? . . . . . . . . . . . 8
2.3. Divertissement 3: Nicolas Leonard Sadi Carnot . . . . . . . . . . . . . 10
2.4. Divertissement 4: Absolute Temperature . . . . . . . . . . . . . . . 10
2.5. Divertissement 8: On the names of thermodynamic functions . . . . . . . . 11
3. Probability and Statistics . . . . . . . . . . . . . . . . . . . . 13
4. Maxwell-Boltzmann Distribution . . . . . . . . . . . . . . . . . . 16
5. Collision Rates, Mean Free Path, and Diffusion . . . . . . . . . . . . . 22
6. Collision Theory of the Rate Constant . . . . . . . . . . . . . . . . 27
7. Notes on the First Law of Thermodynamics . . . . . . . . . . . . . . . 29
7.1. Zeroth Law of Thermodynamics . . . . . . . . . . . . . . . . . 29
7.2. Some Definitions . . . . . . . . . . . . . . . . . . . . . . 29
7.3. Euler’s Theorem, Partial Molar Quantities, . . . . . . . . . . . . . . 31
7.4. Work and Heat in Thermodynamics . . . . . . . . . . . . . . . . 32
7.5. Energy in Classical Mechanics . . . . . . . . . . . . . . . . . . 35
7.6. The First Law of Thermodynamics: . . . . . . . . . . . . . . . . 36
8. Thermochemistry . . . . . . . . . . . . . . . . . . . . . . . 38
8.1. Enthalpy Calculations: Chemical Reactions and Hess’ Law . . . . . . . . . 38
8.2. Measuring ∆H 0 . . . . . . . . . . . . . . . . . . . .
f . . . 39
8.3. Reactions at Different Temperatures: Kirchoff’s Law . . . . . . . . . . . 40
8.4. Bond Energies . . . . . . . . . . . . . . . . . . . . . . . 41
8.5. Some Manipulations Involving Thermodynamic Functions . . . . . . . . . 43
8.5.1. The relationship between C P and CV . . . . . . . . . . . . . . . 43
8.5.2. The Joule-Thompson Experiment . . . . . . . . . . . . . . . . . 44
9. The Second Law of Thermodynamics . . . . . . . . . . . . . . . . 46
10. Carnot Engines, Efficiency, and The Second Law . . . . . . . . . . . . 49
11. Efficiency Of A Real Carnot Engine . . . . . . . . . . . . . . . . . 54
12. The Clausius Inequality and the Mathematical Statement of the Second Law . . . . 57
13. Systems With Variable Composition: The Chemical Potential . . . . . . . . 59
14. Exact Differentials and Maxwell Relations . . . . . . . . . . . . . . 61
15. Thermodynamic Stability: Free Energy and Chemical Equilibrium . . . . . . . 67
15.4.1. Free Energy and Entropy of Mixing . . . . . . . . . . . . . . . 75
15.4.2. Determination of Free Energies of Formation . . . . . . . . . . . . 76
15.4.3. Determination of the Extent of a Reaction . . . . . . . . . . . . . 76
15.5. Coupled Reactions . . . . . . . . . . . . . . . . . . . . . 77
15.6. Temperature Dependence of K p . . . . . . . . . . . . . . . . . 77
16. Eigenvalues and Thermodynamic Stability . . . . . . . . . . . . . . 79
17. Entropy of Mixing: A Statistical View . . . . . . . . . . . . . . . . 81
18. Phase Equilibrium . . . . . . . . . . . . . . . . . . . . . . 84
19. Minimum and Maximum Boiling Azeotropes: The Gibbs-Konovalov Theorem . . . 88
20. Ideal Eutectic Phase Diagrams . . . . . . . . . . . . . . . . . . 91
7. -5-
CHEMISTRY 213B: Introductory Physical Chemistry I.
1. General Information
Lectures: MWF 9:30 - 10:30
Otto Maass 10
Course Web Site: http://ronispc.chem.mcgill.ca/ronis/chem213/Notes.html
(Username: chem213; Password: Gibbs)
Professor: David Ronis
Office: Otto Maass Room 426
E-mail: ronis@onsager.chem.mcgill.ca
Text
G. W. Castellan, Physical Chemistry.
Supplementary Texts
1. P. A. Rock, Chemical Thermodynamics.
2. Gordon M. Barrow, Physical Chemistry.
3. R. Kubo, Thermodynamics (Physics orientation, advanced)
Grades
There will be approximately one problem set per week, two quizes and a final exam.
The quizes will be given at 18:00 on:
Wednesday, February 6, 2002 and Wednesday, March 13, 2002
(in Otto Maass 112)
Completion of the homework is mandatory. Most of the problems will not be graded, although
one or two problems may be chosen at random and graded. Solutions to the problem sets will be
posted on the course web page.
You are strongly encouraged to do the homework. The problems will cover many
details not done in class and will prepare you for the exams. The exams will involve extensive
problem-solving and, in part, will contain problems from the homework! The typical student
will not do well in (or even pass) this course unless the problems are done. The course grading
scheme is:
Winter Term 2001-2002
8. General Information -6- Chemistry CHEM 213W
Grade Distribution
Problems 10%
1st Quiz 25%
2nd Quiz 25%
Final 40%
Winter Term 2001-2002
9. General Information -7- Chemistry CHEM 213W
CHEMISTRY 213B: TENTATIVE OUTLINE
Date Topic Text Chapter
Lecture 1. Introduction: Thermodynamics, an overview 2
Lecture 2. Empirical properties of gases 2
Lecture 3. Empirical properties of liquids and solids 5
Lecture 4. Molecular basis: Kinetic theory of gases 4
Lecture 5. Collision rates, effusion, and diffusion 30
Lecture 6. Viscosity 30
Lecture 7. Temperature: the zeroth law of thermodynamics 6
Lecture 8. Mechanics, Work, and Heat 7
Lecture 9. Reversible and irreversible changes 7
Lecture 10. The First Law of Thermodynamics: Energy 7
Lecture 11. Enthalpy, Hess’s Law 7
Lecture 12. Heat Capacities, Kirchoff’s Law 7
Lecture 13. Estimating Enthalpy Changes: Bond Enthalpies 7
Wednesday, February 6, 2002: First Quiz
Lecture 14. The Carnot Engine/Refrigerator 8
Lecture 15. The Second Law of Thermodynamics: Entropy 8
Lecture 16. Entropy Calculations 8
Lecture 17. The Third Law of Thermodynamics: Absolute Entropies 9
Lecture 18. Conditions for Stable Equilibrium: Free Energies 10
Lecture 19. Equilibrium Conditions (continued) 10
Lecture 20. Maxwell Relations and applications 9.4
Lecture 21. Chemical equilibrium 11
February 25 - March 1: STUDY BREAK
Lecture 22. Chemical equilibrium calculations 11
Lecture 23. Heterogeneous Equilibrium: The phase rule 12
Lecture 24. Phase diagrams of Simple systems: Clapeyron and Clau- 12
sius-Clapeyron equations
Lecture 25. Ideal Solutions 13
Lecture 26. Colligative properties 13
Wednesday, March 13, 2002: Second Quiz
Lecture 27. Colligative properties (continued) 13
Lecture 28. Solutions of volatile components 14
Lecture 29. Lever-principle and fractional distillation 14
Lecture 30. Henry’s Law and solubility. 14
Lecture 31. Solubility calculations 14
Lecture 32. Electrolyte solutions 17
Lecture 33. Electrochemistry: Electrochemical cells 17
Lecture 34. Redox reactions and half-cell potentials 17
Lecture 35. Nernst equation and applications1 17
Lecture 36. Summary
10. General Information -8- Chemistry CHEM 213W
2. Kubo’s Divertissements
From Thermodynamics
(North Holland, 1976)
Ryogo Kubo
University of Tokyo
2.1. Divertissement 1: Founders of the first law of thermodynamics
If a tomb of the Unknown Scientists had been built in the 1850’s, the most appropri-
ate inscription would have been "In memory of the grief and sacrifice of those who fought to
realize a perpetuum mobile". But the law of conservation of energy, or the first law of thermody-
namics, is associated primarily with three great names, Mayer, Helmholtz and Joule.
Julius Robert Mayer (1814-1878) was really a genius who was born in this world
only with the errand to make this great declaration. Hermann Ludwig Ferdinand von Helmholtz
(1821-1894) gave this law the name "Erhaltung der Kraft" or "the conservation of energy". Like
Mayer, he started his career as a medical doctor but lived a glorious life as the greatest physiolo-
gist and physicist of the day. James Prescott Joule (1818-1889) worked over forty years to estab-
lish the experimental verification of the equivalence of work and heat.
Among the three, Mayer was the first who arrived at this law and the last whose
work was recognized. His life was most dramatic. A lightening stroke of genius overtook him, a
German doctor of the age of twenty six, one day on the sea near Java when he noticed that
venous blood of a patient under surgical operation appeared an unusually fresh red. He consid-
ered that this might be connected with Lavoisier’s theory of oxidation in animals, which process
becomes slower in tropical zones because the rate of heat loss by animals will be slower there. A
great generalization of this observation lead him to the idea of the equivalence of heat and
mechanical work. For three years after his voyage, while he was working as a medical doctor at
home, he devoted himself to complete the first work on the conservation of energy "Bemerkun-
gen uber die Krafte der unbelebten Natur" which was sent to the Poggendorf Annalen and was
never published by it. In 1842 Liebig published this paper in his journal (Annalen der Chemie
und Pharmacie) but it was ignored for many years.
Mayer wrote four papers before 1851. During these years of unusual activity he
cared for nothing other than his theory. In 1852 he became mentally deranged and was hospital-
ized. He recovered after two years but never returned to science.
2.2. Divertissement 2: Why do we have winter heating?
The layman will answer: "To make the room warmer." The student of thermody-
namics will perhaps so express it: "To import the lacking (inner, thermal) energy." If so, then the
layman’s answer is right, the scientist’s is wrong.
We suppose, to correspond to the actual state of affairs, that the pressure of the air in
the room always equals that of the external air. In the usual notation, the (inner, thermal) energy
is, per unit mass,*
u = cvT .
11. Divertissement 2 -9- Chemistry CHEM 213W
(An additive constant may be neglected.) Then the energy content is, per unit of volume,
u = cv ρ T ,
or, taking into account the equation of state, we have
P
= RT ,
ρ
we have
u = c v P/R.
For air at atmospheric pressure,
u = 0. 0604cal/cm 3 .
The energy content of the room is thus independent of the temperature, solely determined by the
state of the barometer. The whole of the energy imported by the heating escapes through the
pores of the walls of the room to the outside air.
I fetch a bottle of claret from the cold cellar and put it to be tempered in the warm
room. It becomes warmer, but the increased energy content is not borrowed from the air of the
room but is brought in from outside. Then why do we have heating? For the same reason that
life on the earth needs the radiation of the sun. But this does not exist on the incident energy, for
the latter apart from a negligible amount is re-radiated, just as a man, in spite of continual
absorption of nourishment, maintains a constant body-weight. Our conditions of existence
require a determinate degree of temperature, and for the maintenance of this there is needed not
addition of energy but addition of entropy.
As a student, I read with advantage a small book by F. Wald entitled "The Mistress
of the World and her Shadow". These meant energy and entropy. In the course of advancing
knowledge the two seem to me to have exchanged places. In the huge manufactory of natural
processes, the principle of entropy occupies the position of manager, for it dictates the manner
and method of the whole business, whilst the principle of energy merely does the bookkeeping,
balancing credits and debits.
R. EMDEN
Kempterstrasse 5,
Zurich.
The above is a note published in Nature 141 (l938) 908. A. Sommerfeld found it so
interesting that he cited it in his book Thermodynamic und Statistik (Vorlesungen uber theoretis-
che Physik, Bd. 5, Dietrich’sche Verlag, Wiesbaden; English translation by F. Kestin, Academic
*
The author has assumed that the specific heat of the gas is independent of temperature;
a reasonable approximation for the oxygen and nitrogen around room temperature.
Winter Term 2001-2002
12. Divertissement 2 -10- Chemistry CHEM 213W
Press Tic., New York, 1956). R. Emden is known by his work in astrophysics and meteorology as
represented by an article in der Enzyklopadie der mathematischen Wissenschafte Thermody-
namik der Himmelskorper (Teubuer, Leipzig-Berlin, 1926).
2.3. Divertissement 3: Nicolas Leonard Sadi Carnot
In the first half of the last century, the steam engine, completed by introduction of
the condenser (the low-temperature heat reservoir), due to James Watt (1765) had come to pro-
duce more and more revolutionary effects on developments in industry and transportation. Many
eminent physicists like Laplace and Poisson set about to study the Motive Power of Fire. Sadi
Carnot (1796-1832) was a son of Lazare Carnot, Organizer of Victory in the French Revolution,
and was born and died in Paris. He probably learned the caloric theory of heat, in which heat was
assumed to be a substance capable either of flowing from body to body (heat conduction) or of
making chemical compound with atoms (latent heat). He wrote a short but very important book,
Reflexions sur la puissance motrice du feu et sur les machines propres a developper cette puis-
sance (Paris, 1824), which was reprinted by his brother (1878) together with some of Carnot’s
posthumous manuscripts.
Carnot directed his attention to the point that, in the heat engine, work was done not
at the expense of heat but in connection with the transfer of heat from a hot body to a cold body,
and thus heat could not be used without a cold body, in analogy of water falling from a high
reservoir to a low reservoir. In his book he assumed the law of conversation of heat, namely that
the quantity of heat was a state function, although he later abandoned this law and arrived at the
law of equivalence of heat and work: he actually proposed many methods to estimate the
mechanical equivalent of heat. He introduced what came to be known as Carnot’s cycle, and
established Carnot’s principle.
Carnot’s book had been overlooked until B. P. E. Clapeyron (1834) gave Carnot’s
theory an analytical and graphical expression by making use of the indicator diagram devised by
Watt. The law of conservation of heat assumed by Carnot was corrected by R. Clausius (1850),
based on the work of J. R. von Mayer (1841) and J. P. Joule (1843-49), into the form that not
only a change in the distribution of heat but also a consumption of heat proportional to the work
done is necessary to do work, and vice versa. Clausius named this modification the First Law of
Thermodynamics. H. L. F. van Helmholtz (1847) and Clausius generalized this law to the princi-
ple of the conservation of energy. W. Thomson (Lord Kelvin), who introduced Kelvin’s scale of
temperature (1848) based on Carnot’s work, also recognized the law of equivalence of heat and
work. The Second Law of Thermodynamics was formulated by Thomson (1851) and Clausius
(1867).
A sketch of the history of early thermodynamics is given by E. Mendoza, Physics
Today 14 (1961) No. 2, p. 32. See also E. Mach: Principien der Warmelehre (vierte Aufl. 1923,
Verlag von Johann Ambrosius Barth, Leipzig).
2.4. Divertissement 4: Absolute Temperature
The absolute temperature scale means that temperature scale which is determined by
a thermodynamic method so that it does not depend on the choice of thermometric substance, the
Winter Term 2001-2002
13. Divertissement 4 -11- Chemistry CHEM 213W
zero of the scale being defined as the lowest temperature which is possible thermodynamically.
Absolute temperature, which is now used in thermal physics, was introduced by Lord Kelvin
(William Thomson) in 1848 and is also called the Kelvin temperature.
For the complete definition of the scale, we have two choices; one is to use two fixed
points above zero and assign their temperature difference and the other is to use one fixed point
and assign its numerical value. Until recently the calibration of the Kelvin temperature scale was
performed using two fixed points: the ice point T 0 o K and the boiling point T 0 + 100o K of pure
water under 1 standard atm (= 101325 Pa). We can measure T 0 by a gas thermometric method.
At low pressures, the equation of state of a real gas can be written in the form
pV = α + κ p.
We measure the values of pV, α and κ at the above two fixed points.Considering that α is equal
to nRT , we have
100α 0
T0 =
α 100 − α 0
If we put T 0 = 0, we get the thermodynamic Celsius temperature scale. Hence, −T 0 o C means
absolute zero as measured by this scale.
The precise gas thermometric investigations of the Frenchman P. Chap- puis from
1887 to 1917 gave the value of T 0 between 273.048 and 273.123. Inspired by this work, more
than one hundred determinations of T 0 were performed until 1942. Among them, the results of
W. Heuse and J. Otto of Germany, W. H. Keesom et al. of the Netherlands, J. A. Beattie et al. of
the U.S.A. and M. Kinoshita and J. Oishi of Japan are noted for their high precision. Their values
are found to lie between 273.149 and 273.174.
Considering these results and the fact that the triple point of pure water is very near
to 0.0100o C, the 10th General Conference on Weights and Measures in 1954 decided to use the
triple point of the water as the fixed point and to assign the value 273.16 as its temperature. It
also redefined the thermodynamic Celsius temperature to C as t = T-273.15, where T is the value
of the absolute temperature determined from the above decision. The zero of the new thermody-
namic Celsius temperature differs by about 0.0001o from the ice point.
For ordinary purposes, the differences in these new and old scales are quite negligi-
ble. However, for cases where a precision of 1O−4 degree in the absolute value is required, we
must take the differences into consideration.
2.5. Divertissement 8: On the names of thermodynamic functions
The word "energy εν ε ργ εια " can be seen in the works of Aristotle but "internal
energy" is due to W. Thomson (1852) and R. J. E. Clausius (1876). The portion "en" means
inhalt=capacity and "orgy", like the unit "erg", derives from ε ργ oν =work. "Entropy" is also at-
tributed to Clausius (1865) who took it from {εν τ ρε π ειν =verwandeln and means verwand-
lungsinhalt=change quantity. "Enthalpy" was introduced by H. Kamerlingh Onnes (1909) from
{εν θ α λπ ειν =sich erwarmen which means warmeinhalt. J.W. Gibbs called it the heat function
Winter Term 2001-2002
14. Divertissement 8 -12- Chemistry CHEM 213W
(for constant pressure). "Free energy" is due to H. van Helmholtz (1882), and means that part of
the internal energy that can be converted into work, as seen in the equation dF=d’A for an
isothermal quasi-static process. It was customary to call the remaining part, TS, of the internal
energy, U = F + TS, the gebundene energie (bound energy), but this is not so common now. The
Gibbs free energy (for constant pressure) was introduced by Gibbs, but German scientists used to
call it die freie enthalpie. Thus the thermodynamic functions often have different names in Ger-
man and in English.
Further, on the equation of state: Kamerlingh Onnes gave the names, thermische zus-
tandsgleichung to p = p(T , V ) and the name kalorische zustandsgleichung to E = E(S, V ). M.
Planck (1908) called the latter kanonische zustandsgleichung.
Winter Term 2001-2002
15. Probability -13- Chemistry CHEM 213W
3. Probability and Statistics
As we have stressed in class, when dealing with a macroscopic sample of a material
it is practically impossible to measure or calculate all the microscopic properties of the ∼ 1023
atoms or molecules in the system. Fortunately, many kinds of phenomena do not depend on the
precise behavior of any single particle, and only average properties of the constituent particles
are important. In order to quantify these averages, we must consider some simple ideas in proba-
bility and statistics.
We all encounter probabilistic concepts in daily life. Results of opinion polls, life
expectancy tables, and grade distributions are but a few examples. Shown below, are two grade
distributions for two classes taking an hourly exam in some course.
How would you use this information?
Perhaps the simplest quantity to compute is the average grade; i.e.,
100 N (i)
AVERAGE GRADE = Σ
i=0 N total
i,
where N (i) is the number of students with grade i and N total is the total number of students in
each class. Notice that even though the two distributions are very different, they have the same
roughly the same average grade.
How much information is contained in the average grade and how relevant is the
average to any individual in the class? In the hypothetical distribution the average tells the whole
story. The distribution is extremely narrow, and thus practically everyone got the average grade.
The same is not true in the real distribution; there is a significant spread in the scores. This
spread can be quantified by defining the probability, P(i), of finding any student with grade i. For
this example,
N (i)
P(i) ≡
N total
Winter Term 2001-2002
16. Probability -14- Chemistry CHEM 213W
which is simply the faction of students with grade i. Notice that probabilities are "normalized" in
the sense that
Σ P(i) = 1.
i
This is just a complicated way of stating the fact that every student taking the exam receives
some grade.
A measure of the width of the distribution can be obtained by computing the stan-
dard deviation. If we denote the average grade by <i>, then the standard deviation, σ , is defined
as:
σ2 ≡ Σ P(i) [ i − < i > ]2
i
(Note, σ is the Greek letter sigma).
When we consider atomic and molecular systems the situation becomes somewhat
more complicated, although the basic ideas are the same as those introduced in the grade exam-
ple discussed above. You have already used probability when you learned about atomic and
molecular orbitals. In the kinetic theory of gasses, a different sort of question is being asked;
namely, how do the molecules move?
To be specific, suppose we want the distribution of velocities in the x direction for a
sample of gas containing 1023 molecules. Even if we ignore the experimental impossibility of
measuring the velocities of all of the molecules, what would we do with this huge amount of
information? It would be useful to make the kind of histogram used in discussing grade distribu-
tions; however there is an additional complication. For the exam discussed above, no fractional
grades were assigned, and thus there is a natural bin width of 1 grade point. On the other hand,
nature does not assign discrete values to the x components of the molecular velocities. Hence, if
we were to make our bins too small in constructing our histogram, most of them would contain
only 0 or 1 particles, even for a sample containing 1023 particles.
In order to get around this difficulty, we must include some information about the
size of the "bin" in our introduction of probability. This is done by defining probability density,
F(v x ):
F(v x ) ∆v x ≡ The probability that a molecule has
velocity between v x and v x + ∆v x .
Notice that the bin size is explicitly contained in our definition. Also note that in general proba-
bility densities have units (in this example the units are inverse velocity).
Once we know the probability density, averages can be computed just as in the grade
example considered above. For example,
< v n > = Σ v n F(v x ) ∆v x .
x x (1)
vx
Throughout this part of the course, we will denote average quantities by surrounding them with
Winter Term 2001-2002
17. Probability -15- Chemistry CHEM 213W
"< >". What should this average be for n=0 or 1? What is the physical significance of the aver-
age for n=2?
Of course, typical samples of the gas contain a large number of particles, and thus,
the bins can be taken to be very small. What does the sum in eq. (1) become in this limit? We
know that this is an integral, and we therefore rewrite eq. (1) as
∞
< vn > =
x ∫ v n F(v x ) dv x .
x
−∞
Finally, one more aspect of probability must be considered. In the molecular veloc-
ity example, we discussed only the x component. However, velocity is a vector and there are
also the y and z components. How would we describe the probability that any molecule is travel-
ing in some specific direction? Clearly, for molecules in a gas, the probability that the x compo-
nent of the velocity lies in some interval should be independent of what the other two compo-
nents are doing. For such situations, the probability that a molecule has velocity with compo-
nents in the intervals v x to v x + ∆v x , v y to v y + ∆v y , and v z to v z + ∆v z is
F(v x , v y , v z )∆v x ∆v y ∆v z = F(v x )F(v y )F(v z )∆v x ∆v y ∆v z .
If you are having trouble believing this, consider the probability that three coins come up heads
or tails in any set of three of tosses. This is a model the velocity probability distribution in a uni-
verse were all the magnitudes of the velocity components in the three directions are equal.
Further aspects of probability densities in gas kinetics will be discussed in class, but
this material should get you started.
Winter Term 2001-2002
18. Boltzmann Distribution -16- Chemistry CHEM 213W
4. The Maxwell-Boltzmann Distribution
The molecular description of the bulk properties of a gas depends upon our knowing
the mathematical form of the velocity distribution; That is, the probability,
F(v x , v y , v z )∆v x ∆v y ∆v z , of finding a molecule with velocity components in the range v x to
v x + ∆v x , v y to v y + ∆v y , and v z to v z + ∆v z (see the last handout). This can be found by making
two very simple assumptions:
1. The three components of the velocity are independent of each other. This implies
that the velocity probability density can be written as:
F(v x , v y , v x ) = f (v x ) f (v y ) f (v z ) (1)
2. All directions are equivalent (space is isotropic). This implies that the probability of
finding a molecule moving with a certain velocity cannot depend on the direction; it
is equally probable to find a molecule with any speed v moving in any direction.
Mathematically, this implies that the probability density can only depend on the
magnitude of the velocity, or the molecular speed. Hence,
F(v x , v y , v x ) = F([v 2 + v 2 + v 2 ]1/2 ).
x y z (2)
By comparing Eqs. (1) and (2), we have
f (v x ) f (v y ) f (v z ) = F([v 2 + v 2 + v 2 ]1/2 ).
x y z (3)
Very few functions can satisfy Eq. (3); in fact, the only one is:
f (v i ) = A e−bvi , i = x, y, z
2
(4)
where A and b are, as yet, arbitrary constants. Verify that f given by Eq. (4) satisfies Eq. (3). To
show that Eq. (4) is the only possible function, requires some mathematics which might be
beyond the level of Chemistry 213; however, the proof is contained in the appendix for those of
you who have this extra background.
How do we determine the values of the constants A and b? The function f, is a prob-
ability density and every molecule must have some velocity. From the previous section, we
know that this means
∞ ∞
1= Σ
v x =−∞
f (v x )∆v x → ∫ f (v x )dv x , (5)
−∞
where the integral is obtained when we make ∆v x very small. By going to a table of integrals we
find that
∞
π 1/2
∫ A e−bv dv = A ,
2
(6)
b
− ∞
Winter Term 2001-2002
19. Boltzmann Distribution -17- Chemistry CHEM 213W
which when used in Eq. (5) gives
1/2
b
A= . (7)
π
The parameter b is found as follows: We will compute the pressure that a dilute gas
exerts on the walls of its container and then compare the result with experiment (i.e., the ideal
gas equation of state). What is the pressure and how do we get it from the velocity distribution?
The pressure is the force exerted by the gas per unit area. Moreover, the force is the rate of
change of momentum per unit time due to collisions with the wall.
Imagine the molecules which comprise our gas as billiard balls and assume that the
walls are perfectly smooth. What happens when a molecule collides with the wall? Actually rel-
atively little; the normal component of the velocity changes sign (see Fig. 1).
1111
0000
1111
0000 |v dt|
x
1111
0000
1111
0000
1111
0000
1111
0000
1111
0000
1111
0000
1111
0000
1111
0000 x
1111
0000
1111
0000
1111
0000
1111
0000
1111
0000
1111
0000
1111
0000
Figure 1
If the wall is taken to be the y-z plane, the momentum change is
∆ p = − 2mv x , (8)
where m is the mass of the molecule. A typical velocity is 105 cm/sec; what is a typical momen-
tum change for argon? How many molecules with velocity v x will collide with the wall per unit
area in time ∆t? From Fig. 1, it should be clear that any molecule within a distance v x ∆t will hit
the wall. The number per unit area is therefore:
n(v x )v x ∆t, (9)
where n(v) is the number of molecules per unit volume with x component of velocity in the
range v x to v x + ∆v x . This is related to the molecular velocity distribution by
n(v x ) = n0 f (v x )∆v x , (10)
where n0 is the number of molecules per unit volume. By multiplying Eqs. (8) and (9), dividing
by ∆t and by using Eq. (10), we arrive at the pressure exerted by those molecules with x velocity
component in the range v x to v x + ∆v x :
2 m n0 v 2 f (v x )∆v x .
x (11)
Winter Term 2001-2002
20. Boltzmann Distribution -18- Chemistry CHEM 213W
All that remains is to include the contributions from all velocities corresponding to molecules
moving towards the wall. The pressure, P, thus equals:
∞ ∞
P= Σ 2 m n0 v x 2 f (v x )dv x = ∫ 2 m n0 v x f (v x )dv x
2
v x ≥0
0
∞
1/2
b
∫2m e−bv x dv x ,
2
= n0 v 2
x (12)
0 π
where the last equality comes from using the explicit form of the probability density, [see Eqs.
(4) and (7)]. The value of the integral is:
∞
1 π 1/2
∫ v 2 e−bv x dv x =
2
.
x
4b b
0
If we use this result in Eq. (12), we find that
m n0
P= . (13)
2b
Next we write the ideal gas equation of state in terms of the number density:
P = n0 k B T ,
where k B is Boltzmann’s constant:
R
kB ≡ = 1. 38 × 10−16 erg/deg.
6. 0225 × 10 23
By comparing this with Eq. (13) we see that
m
b= .
2k B T
The velocity probability density for the x component can now be written as
1/2
m −
mv 2x
f (v x ) = e 2k B T (14)
2π k B T
or for the full velocity as
3/2
m −
E
F(v x , v y , v x ) = e k BT , (15)
2π k B T
Winter Term 2001-2002
21. Boltzmann Distribution -19- Chemistry CHEM 213W
where E = m(v 2 + v 2 + v 2 )/2 is the energy of the molecule. This is referred to as the Maxwell-
x y z
Boltzmann distribution function and is illustrated in the following figure:
Notice that increasing the temperature makes it more probable to find molecules
with higher velocities and that the probability of observing any given velocity will decrease as
the energy associated with that velocity increases. This last comment is not limited to our simple
billiard ball model of the molecules.
For many applications, the Maxwell-Boltzmann velocity distribution gives too much
detail. In particular, remember that it is a probability density for the vector velocity. Suppose we
are interested in some property which depends only on the speed of the molecules and not their
direction. What is the probability density which describes the distribution of molecular speeds?
The speed distribution function, F(c) dc, is the probability of observing a molecule
with a speed in the interval c to c + dc irrespective of its direction. It can be obtained from Eq.
(15) as follows: Eq. (15) describes the distribution of velocities. If we are not interested in the
direction of the velocity, all we need do is to average it out; i.e.,
F(c)dc = Σ F(v x , v y , v z )∆v x ∆v y ∆v z = F(v x , v y , v z ) Σ ∆v x ∆v y ∆v z . (16)
→
c≤|v|≤c+dc |v|=c →
c≤|v|≤c+dc
The sums in these last equations are over all velocities such that the speed is between c and
c + dc. The second equality comes from noting that F only depends on the magnitude of the
velocity (see Eq. (15)). What is this last sum? ∆v x ∆v y ∆v z is a volume element in a coordinate
system whose axes are the components of velocity. The sum represents the volume between two
concentric spheres of radius c and c+dc, respectively. Thus
4π
Σ ∆v x ∆v y ∆v z = (c + dc)3 − c 3 ≈ 4π c 2 dc, (17)
→
c≤|v|≤c+dc 3
where the last expression was obtained by expanding the products and dropping nonlinear terms
in dc (remember that we will consider infinitesimally small dc). If we use Eq. (17) in (16), we
Winter Term 2001-2002
22. Boltzmann Distribution -20- Chemistry CHEM 213W
find that
3/2
m −
mc 2
F(c) = 4π c F(v x , v y , v z )
2
= 4π c 2 e 2k B T . (18)
|v|=c 2π k B T
This is the speed distribution and is shown below. Notice that it vanishes when c=0; why?
4.1. Appendix: Proof of Eq. (4)
You will not be responsible for this proof. Differentiate both sides of Eq. (3) with
respect to v x and divide by v x . You get:
df (v x ) dF([v 2 + v 2 + v 2 ]1/2 )
x y z
f (v y ) f (v z )
dv x dv x
= .
vx [v 2 + v 2 + v 2 ]1/2
x y z
By repeating this for v y , equating the results and carrying out a little algebra, we find that:
df (v x ) df (v y )
dv y dv y
=
v x f (v x ) v y f (v y )
The right hand side of the equation depends only on v y and the left hand side depends only on
v x . Since these two components of velocity can be chosen independently, the only way that this
last equation can be satisfied is if both sides are equal to the same constant. Hence,
df (v x ) 1
= − bv x f (v x ).
dv x 2
This is a first order differential equation. It has a general solution which will depend on a single
Winter Term 2001-2002
23. Boltzmann Distribution -21- Chemistry CHEM 213W
multiplicative constant. This solution is given by Eq. (4).
Winter Term 2001-2002
24. Collision Rates and Diffusion -22- Chemistry CHEM 213W
5. Collision Rates, Mean Free Path, and Diffusion
In the previous section, we found the parameter b by computing the average force
exerted on the walls of the container. Suppose, instead, that the rate of collisions (i.e., the num-
ber of collisions per unit area per unit time) was desired. This is important for a number of prac-
tical considerations; e.g., if a chemical reaction takes place every time a molecule hits the sur-
face, then the rate of the reaction will just be the collision rate.
We obtain the collision rate by repeating the analysis which determined the force on
the wall in the previous section. Thus the number of molecules with velocity v x which collide in
time interval ∆t is
n(v x )v x ∆t, (1)
where we are using the same notation as in the preceding section. The total number of collisions
thus becomes:
0
Z wall ∆t ≡ ∫ n(v x )|v x |∆tdv x ,
−∞
0 1/2
m −mv2 /(2k B T )
= ∫
−∞
dv x n0
2π k B T
e x |v x |∆t
1/2
k BT
= n0 ∆t (2)
2π m
Hence the wall collision rate, Z wall , is given by
1/2
k BT
Z wall = n0 (3)
2π m
Aside from the previously mentioned example of chemical reaction on a surface, another applica-
tion of this expression is in effusion though a pinhole. If there is a hole of area A in the surface,
the rate that molecules escape the system is just Z wall A. Notice that heavier molecules or iso-
topes will escape more slowly (with a 1/√ mass dependence); hence, effusion through a pinhole is
a simple way in which to separate different mass species.
Winter Term 2001-2002
25. Collision Rates and Diffusion -23- Chemistry CHEM 213W
RA + R B
|v| ∆ t
Fig. 1
Next consider the number of collisions which a molecule of type A makes with
those of type B in a gas. We will model the two molecules as hard spheres of radii R A and R B ,
respectively. Moreover, in order to simplify the calculation, we will assume that the B molecules
are stationary (this is a good approximation if m B >> m A ). An A molecule moving with velocity
→
v for time ∆t will collide with any B molecule in a cylinder of radius R A + R B (cf. Fig. 1) and
→
length |v|∆t. Hence, volume swept out will just be
|v|∆t π (R A + R B )2 , (4)
and the actual number of collisions will n B × volume swept out The average A-B collision rate, is
→
obtained by multiplying by the probability density for A molecules with velocity v and averag-
ing. Moreover, since only the speed of the molecule is important, we may use the molecular
speed distribution function obtained in the preceding section to average over the speed of A.
Thus, we get
∞ 3/2
m A −m a c2 /(2k B T )
Z A ∆t ≡ ∫
0
4π c 2
2π k B T
e n B c∆t π (R A + R B )2 dc (5)
which, when the integral is performed, gives:
Z A = π (R A + R B )2 c A n B , (6)
where c A is the average molecular speed of A; i.e.,
1/2
8k B T
cA ≡ . (7)
π mA
Winter Term 2001-2002
26. Collision Rates and Diffusion -24- Chemistry CHEM 213W
This is the number of collisions one A suffers in time ∆t. The number of collisions
with B’s that all the A molecules in a unit volume suffer per unit time, Z A,B , is
Z A,B = π (R A + R B )2 c A n A n B (8)
As was mentioned at the outset, our expression is correct if the B’s are not moving.
It turns out that the correction for the motion of B is rather simple (and involves going to what is
called the center-of-mass frame, which is not); specifically, we replace the m A in the definition of
the mean speed by µ A,B , the reduced mass for the A,B pair. The reduced mass is defined as:
m AmB
µ A,B ≡ . (9)
m A + mB
With this correction, our expression becomes
Z A,B = π (R A + R B )2 c A,B n A n B , (10)
where
1/2
8k B T
c A,B ≡ (11)
π µ A,B
is the mean speed of A relative to B. A special case of this expression it the rate of collision of A
molecules with themselves. In this case, Eq. (10) becomes
1
Z A, A = π σ A c A 21/2 n2 ,
2
A (12)
2
where σ A is the molecular diameter of A and where we have divided by 2 in order to not count
each A-A collision twice.
Next, we will consider how far a molecule can move before it suffers a collision.
For simplicity, we will only consider a one component gas. According to Eq. (6), the mean time
between collisions is
1
τ collision ≈ .
21/2 π σ A c A n A
2
Hence, the typical distance traveled by a molecule between collisions, λ is approximately
τ collision c A or
1
λ= .
21/2 π σ A n A
2
This distance is called the mean free path. Note that it only depends on the density of the gas
and the size of the molecules.
Winter Term 2001-2002
27. Collision Rates and Diffusion -25- Chemistry CHEM 213W
We can use these results to obtain an approximate expression for the way in which
concentration differences equilibrate in a dilute gas. Consider a gas containing two kinds of mol-
ecules in which there is a concentration gradient; i.e., the density of molecules per unit volume,
ni (z) depends on position. One way in which the concentration becomes uniform is via diffu-
sion.
To quantify diffusion, we want to find the net number of molecules of a given type
that cross a plane in the gas per unit area per unit time; this is known as the diffusion flux. To see
how the diffusion flux depends on molecular parameters, consider the following figure.
z+λ
z
z− λ
Fig. 2
We want the net flux through the plane at z. From our preceding discussion of mean free paths,
clearly any molecule that starts roughly from a mean free path above or below z, moving towards
z, will not suffer any collisions and will cross. The number that cross the planes at z ± λ per unit
area, per unit time is the same as the wall collision rates we calculated above, that is
1/2
k BT 1
n(z ± λ ) = cn(z ± λ ),
2π m 4
where we have rewritten Eq. (3) in terms of the average molecular speed, Eq. (7). Since all the
molecules that wont collide and will thus cross the plane at z, the net flux (upward) is just
1 1
J= cn(z − λ ) − cn(z + λ )
4 4
1
=− c[n(z + λ ) − n(z − λ )].
4
Since, for most experiments the density barely changes on over a distance comparable to the
mean free path, we use the Taylor expansion to write
Winter Term 2001-2002
28. Collision Rates and Diffusion -26- Chemistry CHEM 213W
dn(z) 1 d 2 n(z) 2 ...
n(z ± λ ) ≈ n(z) + λ+ λ + ,
dz 2 dz 2
which gives Fick’s Law of diffusion,
dn(z)
J = −D ,
dz
where
1
D≡ λc
2
is known as the diffusion constant and has units of length2 /time. (Actually the factor of 1/2 in
our expression for D is not quite right, but the other factors are).
Next consider the total number of molecules inside of some region bounded by
planes at z and z + L. The length L is small compared to the scales that characterize the concen-
tration nonuniformity, but large compared with the mean free path. Clearly the only way for the
total number of molecules in our region, n(z, t)L, to change is by fluxes at the surfaces at z and
z + L. Thus,
∂n(z, t)L ∂J(z, t)
= −J(z + L, t) + J(z, t) ≈ −L ,
∂t ∂z
where we have again used a Taylor expansion, now for the flux itself. Finally, by using our result
for the diffusion flux and canceling the factors of L, we see that
∂n(z, t) ∂2 n(z, t)
=D ,
∂t ∂z 2
which is a kinetic equation for the relaxation of the concentration and is known as the diffusion
equation. Although value of the diffusion constant is quite different, the diffusion equation actu-
ally is more general than our derivation might suggest and holds in liquids and solids as well.
Finally, note that we have only considered systems where the concentration is only nonuniform
in one spatial direction. Should this not be the case, then some simple modifications of our
expressions must be introduced, but these will not be considered here.
There are standard ways in which to solve diffusion equations. However, there is one
general feature of systems relaxing diffusively. Imagine introducing a small droplet of an impu-
rity into a system. Clearly the droplet will spread in time, and you might naively think that the
average droplet size would grow like ct. Of course, this ignores collisions and is incorrect.
From the diffusion equation dimensional analysis correctly suggests that
1 D
≈ 2
t R
or R ≈ √ Dt, which is much slower than the linear behavior that would arise in the absence of col-
lisions. This is what is observed.
Winter Term 2001-2002
29. Collision Rates and Diffusion -27- Chemistry CHEM 213W
6. Collision Theory of the Rate Constant
The simplest collisional model for the rate constants in bimolecular elementary reac-
tions, e.g.,
A + B → Products,
is to assume that reaction occurs every time an A and B molecule collide. Thus the rate
becomes:
RATE = Z A,B (1)
where Z A,B is the number of AB collisions occurring per unit time, per unit volume of the sys-
tem. The kinetic theory of gases gives
Z A,B = π (R A + R B )2 c AB n A n B , (2)
where R A and R B are the van der Waals radii of A and B, respectively, n A and n B are their num-
ber densities, and c AB is the mean relative speed of A with respect to B; i.e.,
1/2
8k B T
c AB ≡ . (3)
π µ AB
In Eq. (3), k B is Boltzmann’s constant and µ AB ≡ m A m B /(m A + m B ) is the AB reduced mass
(m A,B denotes the mass of A or B).
Equation (2) is obtained by considering how many B molecules will lie in the cylin-
der swept out by an A molecule in time dt. The radius of the cylinder is the maximum distance
and A and B can be in order to collide, i.e., R A + R B . Thus the volume of the cylinder for mole-
cules moving with relative speed v is
V (v) ≡ π (R A + R B )2 vdt. (4)
The number of B molecules in the cylinder with relative speed v to v + dv is V (v)n B f (v)dv,
where
3/2 µ AB v 2
2µ AB −
f (v) = 4π v e 2k B T (5)
2π k B T
is the Maxwell-Boltzmann speed distribution function governing the relative motion of B with
respect to A. Finally, our expression for the rate is obtained by adding (integrating) the contribu-
tions for the different relative velocities, multiplying by the number of A molecules per unit vol-
ume and dividing out the factor of dt; i.e,
∞
RATE = n A n B π (R A + R B )2 ∫ dv
0
f (v)v, (6)
Winter Term 2001-2002
30. Collision Rate Constants -28- Chemistry CHEM 213W
which gives the expression presented above.
As was mentioned in class, Eqs. (1) - (3) in general do not correctly describe the
temperature dependence of rate constants since the activation energy does not appear. In order to
correct for this, we will modify our initial hypothesis; specifically, now assume that only those
molecules whose relative speed is greater than v min can react. In this case, Eq. (6) becomes:
∞
RATE = n A n B π (R A + R B )2
v
∫ dv f (v)v, (7)
min
which upon evaluating the integral gives
E
RATE = π (R A + R B )2 c AB e−E A /k B T 1 + A n A n B , (8)
k BT
where E A ≡ µ AB v 2 /2 is the activation energy. This expression has the correct Arrhenius form
min
except for the extra nonexponential factors containing temperature. However, compared with the
exponential factor, these usually do not change very rapidly in temperature and can approxi-
mately be treated as constant. Thus we have derived an approximate expression for the bimolec-
ular rate constant which has at least some of the qualitative features of those found in gas reac-
tions.
Winter Term 2001-2002
31. Notes on the First Law -29- Chemistry CHEM 213W
7. Notes on the First Law of Thermodynamics
7.1. Zeroth Law of Thermodynamics
If two bodies at equilibrium are brought into thermal (i.e., no mechani-
cal, electrical, magnetic, gravitational, etc., work is performed) and
nothing happens, then they are at the same temperature.
Given this, we can always measure the temperature of any system by bringing it into
thermal contact with some standard thermometer. As we shall see, a very convenient choice is
the ideal-gas thermometer. Here a manometer is used to measure the pressure of a fixed amount
of gas in a fixed volume and the relation
NRT
V =
P
is used to calculate the temperature. Needless to say, other temperature standards can (and are)
used.
7.2. Some Definitions
Intensive Doesn’t depend on the size of the system; e.g., P, T, partial molar quan-
tities.
Extensive The opposite of intensive; e.g., mass, volume, energy (but not energy
per unit volume or mass), heat capacities (but not specific heats).
System The part of the universe under investigation. Systems can be:
a) Isolated: no interaction of any kind with surroundings.
Note that real systems cannot be truly isolated, but can be
approximately so on the time-scale of relevance.
b) Closed: energy can be exchanged with surroundings, but
matter cannot.
c) Open: matter and energy can be exchanged.
Surroundings The part of the universe not under investigation.
Boundary What divides the system from the surroundings (and controls whether
the system is open, closed, or isolated).
State A systems state is specified when all measurable properties have defi-
nite values to the accuracy of the experiment.
State Variables A set of measurable quantities, which when known, completely specify
the state of the system. In classical or quantum mechanics there are on
the order of 1023 state variables; however, in thermodynamics, experi-
ence tells us that the macroscopic state of the system is specified after a
small set of measurements are made (e.g., T, P, V, x 1 , ..., x r ).
Winter Term 2001-2002
32. Notes on the First Law -30- Chemistry CHEM 213W
Process Something whereby the state of a system is changed. A process has two
parts:
a) Initial and final states (i.e., where the system starts and
ends).
and a
b) Path. The path describes how the change was effected. In
order to specify the path, intermediate changes in the sys-
tem, surroundings and boundary must be specified. This is
clearly something which we would like to avoid in many
cases.
Reversible A process is said to be reversible if it is possible to return both the sys-
tem and the surroundings to their original state. If not, it is irreversible
(even if the system can be returned to the original state).
State Function A property of the system which only depends on the current state of the
system. Hence, changes in state functions do not depend on the path
taken. State functions play a key role in thermodynamics and allow
macroscopic properties of matter to be studied in a rigorous, systematic
manner. Examples of state functions are: energy, entropy (to be intro-
duced later), P, V, T, etc. A one-component ideal gas has a pressure,
P(T,N,V), given by PV=NRT no matter what--how the T, V, or N
attained their current values is irrelevant.
Winter Term 2001-2002
33. Notes on the First Law -31- Chemistry CHEM 213W
7.3. Euler’s Theorem, Partial Molar Quantities, and the Gibbs-Duhem Relations
Next consider any extensive quantity in a mixture containing r components; i.e.,
A(T , P, N 1 , ..., N ). Real examples could be the energy, volume, mass, heat capacity, etc.. Con-
r
sider the small change in A associated with changes in its arguments, namely
∂A ∂A
dA = dT + dP
∂T P,N 1 ,...,N r ∂P T ,N 1 ,...,N r
∂A ∂A
+ dN 1 + ... + dN , (1)
∂N 1 T ,P,N 2 ,...,N r ∂N r T ,P,N 1 ,...,N r−1 r
Now, by assumption, A is extensive; hence,
A(T , P, λ N 1 , ..., λ N r ) = λ A(T , P, N 1 , ..., N r ). (2)
If we differentiate both sides of this equation with respect to λ and evaluate the answer at λ = 1 it
follows that
∂A ∂A
A(T , P, N 1 , ..., N r ) = N 1 + ... + N (3)
∂N 1 T ,P,N 2 ,...,N r ∂N r T ,P,N 1 ,...,N r−1 r
r
≡ Σ Ai N i ,
i=1
(4)
where
∂A
Ai ≡ (5)
∂N i T ,P,N j≠i
is called a partial molar quantity. Note that the partial molar quantities are intensive. In obtain-
ing Eq. (3) you may use Eq. (1) for dT = dP = 0 and d(λ N i ) = N i d λ for i = 1, ..., r). Also note
that Eq. (3) is a special case of Euler’s theorem for homogeneous functions in calculus.
Equations (3) or (4) allow us to explicitly express the nontrivial features of an exten-
sive quantity in terms of intensive ones, thereby reducing the number of dependencies we must
worry about. It also turns out that the partial molar quantities (or more specifically changes in
them) are not all independent. To see this, we calculate dA from Eq. (4):
r
dA = Σ Ai dN i + N i d Ai ,
i=1
(6)
where we have used the calculus result d(xy) = xdy + ydx. Of course, dA could have been com-
puted from Eq. (1); i.e.,
Winter Term 2001-2002
34. Notes on the First Law -32- Chemistry CHEM 213W
∂A ∂A r
dA = dT + dP + Σ Ai dN i , (7)
∂T P,N 1 ,...,N r ∂P T ,N 1 ,...,N r i=1
where we have rewritten the derivatives with respect to the numbers of moles in terms of the par-
tial molar quantities, cf. Eq. (5). By equating the right hand sides of Eqs. (6) and (7) it follows
that
∂A ∂A r
dT + dP − Σ N i d Ai = 0 (8)
∂T P,N 1 ,...,N r ∂P T ,N 1 ,...,N r i=1
and hence, the changes in the partial molar quantities and other derivatives are not all indepen-
dent. Equation (8) is known as a Gibbs-Duhem relation and can be used to relate seemingly dis-
parate thermodynamic derivatives.
As an exercise, what are the partial molar volumes for an ideal gas mixture obeying
Dalton’s law of partial pressures? Do they obey the Gibbs-Duhem relation?
7.4. Work and Heat in Thermodynamics
Two central concepts in thermodynamics are work and heat. You probably have
seen examples of the former in your freshman physics class, and the latter is something you
experience in daily life. In thermodynamics, both have very precise definitions.
Work: anything which crosses the boundary of the system and is completely convertible
into the lifting of a weight in the surroundings.
Note that work only appears at the boundary of a system, during a change of state, is
extensive, and is manifested by an effect in the surroundings. From mechanics, we know that
dW = Fdx = mgdx,
where dW is the incremental work done by the system, F is the force, and dx is the distance tra-
versed. The second equality is for moving a mass m a distance dx in a gravitational field (g is the
gravitational acceleration constant). Consider the following apparatus:
Winter Term 2001-2002
35. Notes on the First Law -33- Chemistry CHEM 213W
The inside of the piston is filled with some gas at pressure P
M (mass) and is maintained at constant temperature T. Instead of
characterizing the work done in terms of the mass, it is
more convenient to introduce the pressure exerted on the
top of the piston (i.e., force per unit area, A)
F mg
P op ≡ = .
A (area) A A
dx
Note that P op need not equal P.
Thus
−
d W = P op Adx = P op dV
where dV is the incremental change in the volume of the system. The work involved in these
sorts of processes is known as pressure-volume work.
Note that the work done is not a state function--it depends on the pressure exerted
on the piston (the path) and is not simply a function of the state of the gas in the piston. To stress
−
this fact, the notation d will be used for infinitesimal changes in quantities which depend on the
path.
For an process whereby the gas is expanded against some pressure, dV > 0, and
− −
hence, d W > 0. Conversely, in a compression process, d W < 0, i.e., negative work is done by
the system. The surroundings do positive work on the system.
This diagram shows a process for the isothermal
expansion of a gas (in this case an ideal gas). The solid
curve gives the pressure of the gas (i.e., its equation of
state). The dotted curve gives the opposing pressure actu-
ally used in the expansion. Note that the latter lies com-
pletely below the former. If at any point this were not the
case, then the expansion would not proceed spontaneously
(i.e., the opposing pressure would be too large and the gas
would contract).
The total work done by the system is just the area
under the dotted curve:
V final V final
W = ∫
V initial
P op (V )dV ≤ ∫
V initial
P(V )dV ≡ W rev .
If the gas inside the piston is ideal, then the ideal-gas equation of state is valid and
Winter Term 2001-2002
36. Notes on the First Law -34- Chemistry CHEM 213W
V final
NRT
W rev = ∫
V initial
V
dV = NRT ln(V final /V initial ).
Note that the maximum work you can get out of a spontaneous expansion is
obtained when the opposing pressure is infinitesimally less than the pressure being exerted by the
gas in the piston. In this case, W = W R . Unfortunately, the rate of such an expansion would be
zero, as would be the power delivered by the system. On the other hand, it is easy to show that
the path given by P op = P is the only reversible one for the isothermal expansion of an ideal gas.
Consider the following apparatus (from L. K. Nash, Elements of Chemical Thermo-
dynamics, Addison-Wesley, 1970):
The spring is assumed to obey Hooke’s law (i.e, the force is proportional to the elongation). A
series of experiments are performed whereby weights are moved to pan from platforms at various
heights in the surroundings. In doing so, the system (the spring and pan) move from state I to II.
How much work is performed in each of the cases (a)−(c) (assume that there is a total 1cm elon-
gation of the spring and ignore the mass of the pan and spring)?
In order to reverse the process (i.e., the expansion of the spring) the weights are
moved back to the adjacent platforms. However, it is easy to see that while the spring will be
fully compressed at the end of the experiment, the surroundings will not be restored to their ini-
tial state; specifically, in the best case, the topmost weight will be transferred to the lowest plat-
form, no matter how many platforms are used. Clearly the biggest change in the surroundings
will happen in case (a) and the smallest in (c). Moreover, the smaller the individual weights we
use, the more reversible the process becomes (i.e., the change to the surroundings decreases).
The process is reversible in the limit where the applied force (the weight) is only infinitesimally
more than the force exerted by the spring.
This argument can easily be extended to our discussion of pressure-volume work or
to other kinds of work. Hence, the maximum work in a P-V expansion is obtained for a
reversible path.
Winter Term 2001-2002
37. Notes on the First Law -35- Chemistry CHEM 213W
Another key quantity in thermodynamics is heat.
Heat: Anything which flows across the boundary of a system by virtue of a temperature
difference between the system and the surroundings.
Heat is quantified by measuring the temperature rise (or fall) in a standard material
(e.g., a calorie corresponds to the amount of heat required to raise the temperature of 1 g of water
1 oC). Like work, heat appears only at the boundary of a system, during a change of state, is
extensive, and is manifested by an effect in the surroundings. It is also not a state function since
it depends on the nature of the thermal contact allowed at the boundary of the system.
In a classic set of experiments in the 19’th century, J. P. Joule showed that the same
changes in the state of a system could be achieved by either adding work or heat to the system.
One of his devices is shown below.
As the weight falls, the paddles turn and
heat up the liquid in the container by friction
(viscous heating). The same temperature
rise can be achieved by directly heating the
container using a known amount of heat.
The amounts of heat and work were
definite and Joule concluded that work and
heat were simply two different ways in
which energy could be added to a system.
Specifically, Joule showed that
1 calorie = 4. 184 kg m 2 /sec 2 .
We are now ready to state the first law of thermodynamics. Before doing so, it is
illustrative to consider energy in classical mechanics.
7.5. Energy in Classical Mechanics
You probably have heard the statement that "energy is conserved." What does this
mean exactly? Consider a system comprised of N point particles of mass m, at positions
r 1 , ..., r N , and moving with velocities v 1 , ...v N . The system is not subjected to any external
→ → → →
forces. In addition, assume that Newton’s laws of motion are valid and that the particles interact
via pairwise additive forces which are derivable from a potential; i.e., the force particle i exerts
→
on j, F i, j is given by
→ ∂ui, j
F i, j ≡ − → .
∂r i
Consider the energy function, E, defined as
Winter Term 2001-2002
38. Notes on the First Law -36- Chemistry CHEM 213W
N m →2 1 N N
E≡ Σ
i=1
v + Σ Σu .
2 i 2 i=1 j=1 i, j
i≠ j
How does E change as the particles move around under the action of Newton’s Laws?
dE N → 1 N N →
= Σ m v i ⋅ F i − Σ Σ F i, j ⋅ (v i − v j ),
→ → →
dt i=1 2 i=1 j=1
i≠ j
→ → →
where F i ≡ Σ F i, j is the total force acting on the i’th particle.
j≠i
Using this definition of F i in our
expression for the rate of change of E gives:
dE 1 N N →
= Σ Σ F i, j ⋅ (v i + v j )
→ →
dt 2 i=1 j=1
i≠ j
1 N N → →
Σ j=1(F i, j + F j,i ) ⋅ v i
Σ
→
=
2 i=1
i≠ j
→
where the dummy summation indices, i and j, were exchanged for the terms in v j in obtaining
→ →
the last equality. Newton’s third law states that F i, j = − F j,i ; i.e., the force i exerts on j is equal
and opposite to that j exerts on i. Using this in our last expression immediately shows that
dE
= 0.
dt
In other words, the energy of our classical system of particles doesn’t change in time or is con-
served. The same is true under the laws of quantum mechanics. What happens if, in addition to
the forces acting between the particles, the particles are subjected to an external forces?
The first law of thermodynamics also has something to say about changes in energy,
although not in precisely the same way as in classical or quantum mechanics
7.6. The First Law of Thermodynamics:
In any cyclic process (i.e., one where the system returns to its initial
state) the net heat absorbed by the system is equal to the work pro-
duced by the system.
Suppose this were not the case. Then you could presumably find a process which
produced more work than it absorbed heat. This extra work could be used to run a generator,
which in turn could be used to produce more heat, which could run more of process, producing
even more excess work, and so on. The energy crisis, electric bills, etc. would be things of the
past. Unfortunately, no such device has ever been built and the first law still stands.
Winter Term 2001-2002
39. Notes on the First Law -37- Chemistry CHEM 213W
In mathematical terms, the first law implies that there is a state function, called the
internal energy of the system, defined up to an arbitrary additive constant through its differential
− −
dE ≡ d Q − d W ,
−
where d W is the work done by the system (the negative of the work done on the system). For a
finite change of state, the change in the internal energy, ∆E, is given by
final state
∆E = ∫state d− Q − d− W .
initial
The first law states that
∫ = ∫ − Q − ∫ − W = 0.
odE od od
The first law implies that the energy change computed along different paths must
give the same answer. If not, two such paths could be used to to build the energy-creating device
discussed above (i.e., by reversing one of the paths).
Winter Term 2001-2002
40. Thermochemistry -38- Chemistry CHEM 213W
8. THERMOCHEMISTRY
8.1. Enthalpy Calculations: Chemical Reactions and Hess’ Law
The enthalpy change for a process, ∆H, is equal to the heat absorbed by the system
if that process is done under constant pressure conditions (and assuming that only P-V work is
possible). Since the enthalpy of a system, H = E + PV, is a state function, we can systematize
enthalpy calculations by considering a path whereby the compounds first turn into their con-
stituent elements in their standard states (by convention at 25 oC and 1 atm pressure) and then
recombine to form the products. The enthalpy change in the latter step is just the enthalpy of for-
mation of the products and the former is the enthalpy of destruction (i.e., the negative of the
enthalpy of formation) of the reactants. Hence,
∆H = Σ ∆H 0 ( products) − ∆H 0 (reactants). (1)
f f
Since we are interested in calculating a difference, the absolute enthalpy of the ele-
ments in their standard states is unimportant [it cancels out of Eq. (1)], and we adopt the conven-
tion that the enthalpy of formation of an element in its standard state is zero.
Consider the following example (reduction of iron oxide):
25 o C, 1 atm
Fe2 O3 (s) + 3H 2 (g) → 2Fe(s) + 3H 2 O(l).
A table of thermochemical data gives:
Enthalpies of Formation at 1 atm and 25 C
Compound ∆H 0 (kJ/mole)
f
Fe2 O3 (s) -824.2
H 2 (g) 0.0
Fe(s) 0.0
H 2 O(l) -285.830
By using these in Eq. (1), we find that
∆H = [3(−285. 830) − (−824. 2)]kJ/mole
= −33. 29kJ/mole.
Note that the calculated enthalpy change depends on how the reaction was written. For example,
if we wrote
Winter Term 2001-2002
41. Thermochemistry -39- Chemistry CHEM 213W
1 3 25 o C, 1 atm 3
Fe2 O3 (s) + H 2 (g) → Fe(s) + H 2 O(l),
2 2 2
then ∆H = −16. 65 kJ/mole.
8.2. Measuring ∆H 0
f
There are a number of ways in which to measure the enthalpy of formation of a
compound; here are two. The most obvious is to simply carry out the formation reaction from
the constituent elements in their standard states in a constant pressure calorimeter (recall that
∆H = Q p ).
For example, consider the combustion of graphite to form carbon dioxide
25 o C, 1 atm
C(graphite) + O2 (g) → CO2 (g).
The heat released in this reaction is −∆H 0 (CO2 ), since the standard enthalpy of formation of the
f
reactants is zero.
For this method to work, two conditions must be met: 1) the reaction goes to com-
pletion and 2) only one product is formed. Thus, the reaction
25 o C, 1 atm
C(graphite) + 2H 2 (g) → CH 4 (g)
is not suitable for this method since it doesn’t readily go to completion and we get a complicated
mixture of hydrocarbons.
In order to get around this, note that it is often possible to burn something to com-
pletion (and measure ∆H combustion , the heat released). Thus consider
25 o C, 1 atm
CH 4 (g) + 2O2 → CO2 (g) + 2H 2 O(l).
Equation (1) gives
∆H combustion = ∆H 0 (CO2 (g)) + 2∆H 0 (H 2 O(l)) − ∆H 0 (CH 4 (g)).
f f f
The standard enthalpies of formation of carbon dioxide and water can be measured using the first
method; hence, once we measure the heat of combustion, the only unknown is the standard
enthalpy of formation of methane (CH4) and a little algebra gives:
∆H 0 (CH 4 (g)) = ∆H 0 (CO2 (g)) + 2∆H 0 (H 2 O(l)) − ∆H combustion .
f f f
= [−398. 51 + 2(−285. 83) − (−890. 36)]kJ/mole
= −74. 81kJ/mole.
Winter Term 2001-2002