This document provides information about Chateau Elysée, a residential condominium development project by SM Development Corporation (SMDC) located in Bicutan, Parañaque City. It describes the location and site plan, amenities, unit types and features, and frequently asked questions. Specifically, it highlights two clusters within the development: Seine and Vendome. Seine will have 588 units across four buildings while Vendome will have 560 units. The document includes floor plans and photos of sample units.
O documento discute as diferenças entre alvenaria convencional, alvenaria estrutural e alvenaria de vedação. A alvenaria convencional usa pilares e vigas para suportar o peso, enquanto a alvenaria estrutural usa as próprias paredes. A alvenaria estrutural pode ser mais rápida e barata, mas não permite reformas futuras. A alvenaria de vedação é usada para separar ambientes e não suporta peso.
Ch1 Introduction (Steel Bridges تصميم الكباري المعدنية & Prof. Dr. Metwally A...Hossam Shafiq II
This document provides an introduction to steel bridges, including:
1. It discusses the history and evolution of bridge engineering and the key components of bridge structures.
2. It describes different classifications of bridges according to materials, usage, position, and structural forms. The structural forms include beam bridges, frame bridges, arch bridges, cable-stayed bridges, and suspension bridges.
3. It provides examples of different types of bridges and explains the basic structural systems used in bridges, including simply supported, cantilever, and continuous beams as well as rigid frames.
This document provides information about cable protection systems from Polypipe Civils, including questions and answers about different types of cable protection. It discusses Ridgiduct, which is a twin wall cable protection system certified to ENATS standards for power cables. It is lightweight yet robust. The document also mentions general purpose ducting and PVC ducting as alternatives. Access boxes and fittings that can be used with the cable protection systems are listed along with their common sizes. Installation advice is also available.
At the beginning of the twentieth century, “Prestressed Concrete” soon became the single most significant new direction in structural engineering according to Billington (2004).
This unique concept gave the engineer the ability to control the actual structural behavior while forcing him or her to dive more deeply into the construction process of the structural material. It gave architects as well as engineers a new realm of reinforced concrete design pushing not only the structural but also the architectural limits of concrete design to a level that neither concrete nor structural steel could achieve. Ordinary reinforced concrete could not achieve the same limits because the new long spans that “Prestressed Concrete” were able to achieve could not be reached with reinforced concrete. Those longer spans required much deeper members, which quickly made reinforced concrete uneconomical. Additionally, steel structures weren’t able to create the same architectural forms that the new “Prestressed Concrete” could.
1.2.1: Prestressed Concrete Concept ,Idea & Designs
P.H.Jackson – 1888 – USA.
The concept of Prestressed Concrete appeared in 1888 when P.H. Jackson was granted the first patent in the United States for Prestressed Concrete design as a method of Prestressed construction in concrete pavement.
Jackson’s idea was perfect, but the technology of high strength steel that exhibited low relaxation characteristics was not yet available. This was the reason Prestressed Concrete was not used as building material in the early years. For example, metallurgists had not yet discovered high strength steel, which combined the needed high compressive forces in a minimal amount of steel with low relaxation characteristics that minimized creep and post-stress deformations in the prestressing steel; therefore, the idea hibernated until Freyssinet reexamined it in the early twentieth century, the first to actively promote prestressed concrete.
This document defines and describes various elements of plumbing systems and waste water. It discusses three types of waste water - storm water, grey water, and black water. It then defines 31 elements of sanitary plumbing systems, including soil pipes, stacks, vents, branches, drains, sewers, traps, and more. It provides diagrams to illustrate concepts like shafts, pipe chases, and pipe sleeves. Overall, the document provides a comprehensive overview of key components and terminology related to plumbing systems and waste water management.
Introduction of Prefabricated structuresYogi Yogesh
Prefabrication involves assembling building components in a factory and transporting them to the construction site. It aims to reduce costs, improve quality, and speed up construction. Advantages include reduced work time, fewer workers needed, and omitting interruptions. Limitations include size restrictions and transport difficulties. Modular coordination standardizes dimensions. Precast construction allows for industrial quality control while limiting on-site space needs and waste.
Expansion joints are designed to absorb heat-induced expansion and contraction in construction materials. They are commonly found between sections of slabs and bridges. Modern expansion joint systems use rubber-based or thermoplastic tapes that are simply applied with adhesive. These systems are UV resistant, highly elastic, and can withstand extreme joint movements. Movement joints up to 35mm wide can be waterproofed with sealants, while wider expansion and dilation joints use tapes. Proper substrate preparation and priming is required for quality waterproofing.
This document provides information about Chateau Elysée, a residential condominium development project by SM Development Corporation (SMDC) located in Bicutan, Parañaque City. It describes the location and site plan, amenities, unit types and features, and frequently asked questions. Specifically, it highlights two clusters within the development: Seine and Vendome. Seine will have 588 units across four buildings while Vendome will have 560 units. The document includes floor plans and photos of sample units.
O documento discute as diferenças entre alvenaria convencional, alvenaria estrutural e alvenaria de vedação. A alvenaria convencional usa pilares e vigas para suportar o peso, enquanto a alvenaria estrutural usa as próprias paredes. A alvenaria estrutural pode ser mais rápida e barata, mas não permite reformas futuras. A alvenaria de vedação é usada para separar ambientes e não suporta peso.
Ch1 Introduction (Steel Bridges تصميم الكباري المعدنية & Prof. Dr. Metwally A...Hossam Shafiq II
This document provides an introduction to steel bridges, including:
1. It discusses the history and evolution of bridge engineering and the key components of bridge structures.
2. It describes different classifications of bridges according to materials, usage, position, and structural forms. The structural forms include beam bridges, frame bridges, arch bridges, cable-stayed bridges, and suspension bridges.
3. It provides examples of different types of bridges and explains the basic structural systems used in bridges, including simply supported, cantilever, and continuous beams as well as rigid frames.
This document provides information about cable protection systems from Polypipe Civils, including questions and answers about different types of cable protection. It discusses Ridgiduct, which is a twin wall cable protection system certified to ENATS standards for power cables. It is lightweight yet robust. The document also mentions general purpose ducting and PVC ducting as alternatives. Access boxes and fittings that can be used with the cable protection systems are listed along with their common sizes. Installation advice is also available.
At the beginning of the twentieth century, “Prestressed Concrete” soon became the single most significant new direction in structural engineering according to Billington (2004).
This unique concept gave the engineer the ability to control the actual structural behavior while forcing him or her to dive more deeply into the construction process of the structural material. It gave architects as well as engineers a new realm of reinforced concrete design pushing not only the structural but also the architectural limits of concrete design to a level that neither concrete nor structural steel could achieve. Ordinary reinforced concrete could not achieve the same limits because the new long spans that “Prestressed Concrete” were able to achieve could not be reached with reinforced concrete. Those longer spans required much deeper members, which quickly made reinforced concrete uneconomical. Additionally, steel structures weren’t able to create the same architectural forms that the new “Prestressed Concrete” could.
1.2.1: Prestressed Concrete Concept ,Idea & Designs
P.H.Jackson – 1888 – USA.
The concept of Prestressed Concrete appeared in 1888 when P.H. Jackson was granted the first patent in the United States for Prestressed Concrete design as a method of Prestressed construction in concrete pavement.
Jackson’s idea was perfect, but the technology of high strength steel that exhibited low relaxation characteristics was not yet available. This was the reason Prestressed Concrete was not used as building material in the early years. For example, metallurgists had not yet discovered high strength steel, which combined the needed high compressive forces in a minimal amount of steel with low relaxation characteristics that minimized creep and post-stress deformations in the prestressing steel; therefore, the idea hibernated until Freyssinet reexamined it in the early twentieth century, the first to actively promote prestressed concrete.
This document defines and describes various elements of plumbing systems and waste water. It discusses three types of waste water - storm water, grey water, and black water. It then defines 31 elements of sanitary plumbing systems, including soil pipes, stacks, vents, branches, drains, sewers, traps, and more. It provides diagrams to illustrate concepts like shafts, pipe chases, and pipe sleeves. Overall, the document provides a comprehensive overview of key components and terminology related to plumbing systems and waste water management.
Introduction of Prefabricated structuresYogi Yogesh
Prefabrication involves assembling building components in a factory and transporting them to the construction site. It aims to reduce costs, improve quality, and speed up construction. Advantages include reduced work time, fewer workers needed, and omitting interruptions. Limitations include size restrictions and transport difficulties. Modular coordination standardizes dimensions. Precast construction allows for industrial quality control while limiting on-site space needs and waste.
Expansion joints are designed to absorb heat-induced expansion and contraction in construction materials. They are commonly found between sections of slabs and bridges. Modern expansion joint systems use rubber-based or thermoplastic tapes that are simply applied with adhesive. These systems are UV resistant, highly elastic, and can withstand extreme joint movements. Movement joints up to 35mm wide can be waterproofed with sealants, while wider expansion and dilation joints use tapes. Proper substrate preparation and priming is required for quality waterproofing.
Plant-cast precast concrete elements are constructed in a controlled factory environment using reusable steel forms. This allows for higher quality and efficiency than site-cast concrete. Elements like beams, slabs, columns and walls are reinforced with steel and cured quickly so they can be transported and assembled on-site like structural steel framing. Joints are connected using embedded plates and angles then grouted to form integrated, durable structures.
This document reviews the feasibility of using modular construction techniques for hotel, housing, and worker accommodation developments. Modular construction involves factory production of prefabricated rooms or units that are assembled on site. Key benefits include short construction time, high quality control, reliable timescales, and price certainty. Modular construction works best for repetitive building types, where scheduling is tight, and quality is important. It can provide durable buildings with acoustic and thermal insulation that meet building regulations.
This document summarizes the process for constructing secant piles for a microtunnel shaft. It involves first constructing guide walls as reference points. Then female piles are drilled and concreted without reinforcement cages using lower grade concrete. Male piles are drilled between female piles, cutting through them. Reinforcement cages are installed in male piles before higher grade concrete is placed continuously from the bottom up via a tremie. The casing is gradually extracted to allow the concrete to rise above the cutoff level.
Taipei 101 is a landmark 101-story skyscraper in Taipei, Taiwan. It was the world's tallest building from 2004 to 2010. Some key points:
- Taipei 101 was designed to withstand typhoons and earthquakes and has structural systems like outrigger trusses, belt trusses, and a 660-tonne tuned mass damper to absorb vibrations.
- At 508 meters tall with 101 floors above ground, it held several height records for buildings until surpassed by Burj Khalifa.
- The building's structural design uses steel and concrete columns, including eight large "mega-columns", to support its height and resist lateral forces.
- Taipei
Ferrocement is a thin reinforced concrete made of cement mortar and wire mesh. It is strong, durable, and low-cost. Common applications include walls, floors, roofs, water tanks, bridges, and marine structures. Ferrocement is 2-5 cm thick and has a cement mortar mix reinforced with steel mesh or rods. It was invented in the 1850s and methods of construction include skeletal armature, closed mould, integral mould, and open mould. Ferrocement is used Residential buildings, marine applications, water and sanitation infrastructure, agriculture, renewable energy, and other structures.
This document discusses floating and moving houses. It begins with an introduction that notes rising sea levels and the need for new types of housing. It then outlines the contents which will cover floating house types, principles, systems, and services. Examples of floating houses include those on log rafts and steel pontoons. Floating houses are buoyant and distribute weight across flotation materials. Vertically moving houses use telescoping poles and a floating frame. Services like plumbing and electricity must be flexible to accommodate rising water. Floating houses may become more necessary as sea levels continue rising and could help during floods. India would benefit from expertise in floating house construction.
This document provides design aids for reinforced concrete structures according to Indian Standard IS: 456-1978 Code of Practice for Plain and Reinforced Concrete. It includes charts, tables, and examples to aid in the design of beams, slabs, columns, shear strength, development length, and other reinforced concrete elements based on the limit state and working stress design methods specified in the code. The document is intended to supplement an explanatory handbook on IS: 456-1978 by streamlining the design process. It covers material properties, flexural members, compression members, shear and torsion, development length, and working stress design.
The document discusses precast concrete structures. It describes how precast construction involves manufacturing structural components in a controlled plant environment using standardized molds, then transporting them to the construction site for assembly. Precast offers advantages like higher quality control, faster construction, and less on-site labor. The document outlines the precasting process and various connection techniques. It provides examples of precast floor and roof systems.
The document discusses various types of wood floor systems and concrete floor systems. It explains the advantages of precast concrete over site-cast concrete, such as better quality control and the ability to steam cure. It also defines one-way and two-way concrete floor systems and lists different types of each, including solid slab, joist, flat plate, and waffle slab systems.
What are the types of structural steel framingnajeeb muhamed
Different types of structural steel framing systems for buildings such as skeleton, wall bearing and long span framing systems and their applications and configurations are discussed.
The application of precast concrete structural systems has been attaining vast progress worldwide, and now in India. Real Estate Company are Introducing Precast System. Because of lots of advantage over cast in situ system the precast system is getting attention in India. The advantages are high quality, high strength, speedy construction, economical, requirement of less manpower. During the 1920s reinforced concrete was used in Spring Mills, Mumbai for building flats for mill workers. The engineers were British, who built these structures. In the initial days reinforced concrete was built using steel and cement. The books that were referred for designing precast structures were from UK, that the then engineers took as a guide to carry on construction. The Napier Bridge in Chennai was built near the Fort area between 1939–1943; it was the first pre-stressed concrete bridge in India. The Madras Port is built using precast piles and retaining walls between 1905–1910, which is the first recorded pile foundation with precast. The best architects of that time were involved in designing these structures. The paper deals with the research and the application of precast concrete structural systems in India. The paper also describes the development already achieved to date in the applications of the precast concrete structural systems in the constructions field in India.
prestressed concrete and precast concrete technology.pptxPRASANNABHAVANGR1
This document provides information on precast, prestressed concrete construction. It discusses how precast concrete elements are cast off-site in a controlled environment and transported to the construction site. This allows for faster, more efficient construction compared to site-cast concrete. Common precast structural elements include slabs, beams, columns, and wall panels. The document outlines the manufacturing process and how precast elements are joined together on-site. It also discusses some applications of precast concrete such as buildings, bridges, and water tanks.
Multi storey structural steel structuresThomas Britto
Steel has been used in construction for over 150 years. Its use in Hong Kong started in the 1970s with projects like the Park Lane Hotel. Steel has properties that make it suitable for high-rise buildings like strength and versatility, though it can be heavy, lose strength in heat, and rust. Standard steel sections provide design flexibility. Connections are made through joints like splices and welds. Common frame types include simple cage frames, cantilevers, wind-braced, and core structures. Steel construction has advantages like lighter weight and flexibility for changes, but has challenges like fire resistance, movement, and corrosion protection.
This document discusses the benefits of modular construction techniques for building hotels, housing, and worker accommodation. Some key advantages of modular construction include shorter construction timelines, reduced costs through factory production, high quality control, and the ability to construct buildings even in difficult weather conditions or locations with skill shortages. Modular construction involves factory production and assembly of standardized room-sized modules that are transported and connected on-site.
Telecommunication involves the transmission of messages over distances for communication purposes. Historically, visual signals like smoke signals were used, but modern telecommunication relies on electrical signals transmitted via cables, radio waves or other media. All telecommunication systems have four basic components - a sender that creates a signal from information, a transmission medium that carries the signal, a receiver that converts the signal back into usable information, and a communication channel connecting sender and receiver. Examples of telecommunication tools include the telegraph, telephone, radio, television and computer networks. Communication can be transmitted via analog signals like voice or digital signals like computer data. Key developments in Malaysia's telecommunication history include the first telegraph cable in 1870, telephone exchanges in the 1890s
This document discusses tensile structures and fabric structures. It describes different types of tensile structures like suspension bridges and cable trusses. It also discusses different types of fabric structures like saddle roofs and mast-supported roofs. The document outlines various coated and open-mesh fabrics that are used in tensile and fabric structures, including PVC, THV, PTFE, and ETFE materials. It notes advantages like unique designs and high strength-to-weight ratios, as well as disadvantages like brittleness and loss of stability if tension is lost.
This document outlines accessibility laws and regulations in the Philippines, specifically Batas Pambansa Bilang 344 (Accessibility Law) and its amended implementing rules and regulations. Some key points:
- The law requires certain buildings, institutions, establishments and public utilities to install accessibility features like ramps and railings to enhance mobility for disabled persons.
- Amended implementing rules specify minimum accessibility requirements for new and existing buildings, streets/sidewalks, transportation, public phones and more.
- Requirements include accessible entrances/exits, parking, signs, stairs, restrooms, elevators and more based on building use categories.
- Violators face imprisonment and fines. Exemptions allow for
We offer House & Lot, Beach Lot, Condominium etc.
For site visit call/text: DAISY MENDEZ 0906-4753779/0922-4417886
Log on to: http//daisy.bahay.ph
We accept: CASH, BANK& PAG-IBIG FINANCING,IN-HOUSE
We offer House & Lot, Beach Lot, Condominium etc.
For site visit call/text: DAISY MENDEZ 0906-4753779/0922-4417886
Log on to: http//daisy.bahay.ph
We accept: CASH, BANK& PAG-IBIG FINANCING,IN-HOUSE
Plant-cast precast concrete elements are constructed in a controlled factory environment using reusable steel forms. This allows for higher quality and efficiency than site-cast concrete. Elements like beams, slabs, columns and walls are reinforced with steel and cured quickly so they can be transported and assembled on-site like structural steel framing. Joints are connected using embedded plates and angles then grouted to form integrated, durable structures.
This document reviews the feasibility of using modular construction techniques for hotel, housing, and worker accommodation developments. Modular construction involves factory production of prefabricated rooms or units that are assembled on site. Key benefits include short construction time, high quality control, reliable timescales, and price certainty. Modular construction works best for repetitive building types, where scheduling is tight, and quality is important. It can provide durable buildings with acoustic and thermal insulation that meet building regulations.
This document summarizes the process for constructing secant piles for a microtunnel shaft. It involves first constructing guide walls as reference points. Then female piles are drilled and concreted without reinforcement cages using lower grade concrete. Male piles are drilled between female piles, cutting through them. Reinforcement cages are installed in male piles before higher grade concrete is placed continuously from the bottom up via a tremie. The casing is gradually extracted to allow the concrete to rise above the cutoff level.
Taipei 101 is a landmark 101-story skyscraper in Taipei, Taiwan. It was the world's tallest building from 2004 to 2010. Some key points:
- Taipei 101 was designed to withstand typhoons and earthquakes and has structural systems like outrigger trusses, belt trusses, and a 660-tonne tuned mass damper to absorb vibrations.
- At 508 meters tall with 101 floors above ground, it held several height records for buildings until surpassed by Burj Khalifa.
- The building's structural design uses steel and concrete columns, including eight large "mega-columns", to support its height and resist lateral forces.
- Taipei
Ferrocement is a thin reinforced concrete made of cement mortar and wire mesh. It is strong, durable, and low-cost. Common applications include walls, floors, roofs, water tanks, bridges, and marine structures. Ferrocement is 2-5 cm thick and has a cement mortar mix reinforced with steel mesh or rods. It was invented in the 1850s and methods of construction include skeletal armature, closed mould, integral mould, and open mould. Ferrocement is used Residential buildings, marine applications, water and sanitation infrastructure, agriculture, renewable energy, and other structures.
This document discusses floating and moving houses. It begins with an introduction that notes rising sea levels and the need for new types of housing. It then outlines the contents which will cover floating house types, principles, systems, and services. Examples of floating houses include those on log rafts and steel pontoons. Floating houses are buoyant and distribute weight across flotation materials. Vertically moving houses use telescoping poles and a floating frame. Services like plumbing and electricity must be flexible to accommodate rising water. Floating houses may become more necessary as sea levels continue rising and could help during floods. India would benefit from expertise in floating house construction.
This document provides design aids for reinforced concrete structures according to Indian Standard IS: 456-1978 Code of Practice for Plain and Reinforced Concrete. It includes charts, tables, and examples to aid in the design of beams, slabs, columns, shear strength, development length, and other reinforced concrete elements based on the limit state and working stress design methods specified in the code. The document is intended to supplement an explanatory handbook on IS: 456-1978 by streamlining the design process. It covers material properties, flexural members, compression members, shear and torsion, development length, and working stress design.
The document discusses precast concrete structures. It describes how precast construction involves manufacturing structural components in a controlled plant environment using standardized molds, then transporting them to the construction site for assembly. Precast offers advantages like higher quality control, faster construction, and less on-site labor. The document outlines the precasting process and various connection techniques. It provides examples of precast floor and roof systems.
The document discusses various types of wood floor systems and concrete floor systems. It explains the advantages of precast concrete over site-cast concrete, such as better quality control and the ability to steam cure. It also defines one-way and two-way concrete floor systems and lists different types of each, including solid slab, joist, flat plate, and waffle slab systems.
What are the types of structural steel framingnajeeb muhamed
Different types of structural steel framing systems for buildings such as skeleton, wall bearing and long span framing systems and their applications and configurations are discussed.
The application of precast concrete structural systems has been attaining vast progress worldwide, and now in India. Real Estate Company are Introducing Precast System. Because of lots of advantage over cast in situ system the precast system is getting attention in India. The advantages are high quality, high strength, speedy construction, economical, requirement of less manpower. During the 1920s reinforced concrete was used in Spring Mills, Mumbai for building flats for mill workers. The engineers were British, who built these structures. In the initial days reinforced concrete was built using steel and cement. The books that were referred for designing precast structures were from UK, that the then engineers took as a guide to carry on construction. The Napier Bridge in Chennai was built near the Fort area between 1939–1943; it was the first pre-stressed concrete bridge in India. The Madras Port is built using precast piles and retaining walls between 1905–1910, which is the first recorded pile foundation with precast. The best architects of that time were involved in designing these structures. The paper deals with the research and the application of precast concrete structural systems in India. The paper also describes the development already achieved to date in the applications of the precast concrete structural systems in the constructions field in India.
prestressed concrete and precast concrete technology.pptxPRASANNABHAVANGR1
This document provides information on precast, prestressed concrete construction. It discusses how precast concrete elements are cast off-site in a controlled environment and transported to the construction site. This allows for faster, more efficient construction compared to site-cast concrete. Common precast structural elements include slabs, beams, columns, and wall panels. The document outlines the manufacturing process and how precast elements are joined together on-site. It also discusses some applications of precast concrete such as buildings, bridges, and water tanks.
Multi storey structural steel structuresThomas Britto
Steel has been used in construction for over 150 years. Its use in Hong Kong started in the 1970s with projects like the Park Lane Hotel. Steel has properties that make it suitable for high-rise buildings like strength and versatility, though it can be heavy, lose strength in heat, and rust. Standard steel sections provide design flexibility. Connections are made through joints like splices and welds. Common frame types include simple cage frames, cantilevers, wind-braced, and core structures. Steel construction has advantages like lighter weight and flexibility for changes, but has challenges like fire resistance, movement, and corrosion protection.
This document discusses the benefits of modular construction techniques for building hotels, housing, and worker accommodation. Some key advantages of modular construction include shorter construction timelines, reduced costs through factory production, high quality control, and the ability to construct buildings even in difficult weather conditions or locations with skill shortages. Modular construction involves factory production and assembly of standardized room-sized modules that are transported and connected on-site.
Telecommunication involves the transmission of messages over distances for communication purposes. Historically, visual signals like smoke signals were used, but modern telecommunication relies on electrical signals transmitted via cables, radio waves or other media. All telecommunication systems have four basic components - a sender that creates a signal from information, a transmission medium that carries the signal, a receiver that converts the signal back into usable information, and a communication channel connecting sender and receiver. Examples of telecommunication tools include the telegraph, telephone, radio, television and computer networks. Communication can be transmitted via analog signals like voice or digital signals like computer data. Key developments in Malaysia's telecommunication history include the first telegraph cable in 1870, telephone exchanges in the 1890s
This document discusses tensile structures and fabric structures. It describes different types of tensile structures like suspension bridges and cable trusses. It also discusses different types of fabric structures like saddle roofs and mast-supported roofs. The document outlines various coated and open-mesh fabrics that are used in tensile and fabric structures, including PVC, THV, PTFE, and ETFE materials. It notes advantages like unique designs and high strength-to-weight ratios, as well as disadvantages like brittleness and loss of stability if tension is lost.
This document outlines accessibility laws and regulations in the Philippines, specifically Batas Pambansa Bilang 344 (Accessibility Law) and its amended implementing rules and regulations. Some key points:
- The law requires certain buildings, institutions, establishments and public utilities to install accessibility features like ramps and railings to enhance mobility for disabled persons.
- Amended implementing rules specify minimum accessibility requirements for new and existing buildings, streets/sidewalks, transportation, public phones and more.
- Requirements include accessible entrances/exits, parking, signs, stairs, restrooms, elevators and more based on building use categories.
- Violators face imprisonment and fines. Exemptions allow for
We offer House & Lot, Beach Lot, Condominium etc.
For site visit call/text: DAISY MENDEZ 0906-4753779/0922-4417886
Log on to: http//daisy.bahay.ph
We accept: CASH, BANK& PAG-IBIG FINANCING,IN-HOUSE
We offer House & Lot, Beach Lot, Condominium etc.
For site visit call/text: DAISY MENDEZ 0906-4753779/0922-4417886
Log on to: http//daisy.bahay.ph
We accept: CASH, BANK& PAG-IBIG FINANCING,IN-HOUSE
This document advertises condominium units for sale at The Beacon Resort Condominium in Makati City, Philippines. It provides details on available unit types from studios up to 3-bedroom penthouse units, along with floor plans, amenities, and payment plans. Construction is underway on the 42-floor building, with units expected to be delivered in 2011-2013 and fully fitted with modern finishes. Inquiries can be directed to sales representatives from SN Homefinders.
Real Estate Property, Invest on a white beach resort. pre-selling stage, so invest now while the the cost is still very low, this is the time to get the best lot location and corner lots
One Castilla Place Vacation Resort Condo Great Investment No Spot DownpaymentAlvin Antiquiera
One Castilla Place is a residential condominium development located on 5.4 hectares in Quezon City. It offers 67% open space with landscaped gardens and amenities like swimming pools and a sky park. Unit types range from one to three bedrooms ranging between 40-108 square meters. Amenities include an entertainment room, game room, sky lounge, and indoor/outdoor recreational areas. The development aims to provide a private, secure, and serviced neighborhood for upper middle-income families within reach of the city center.
The document provides information about the Wellington Courtyard condominium development in Tagaytay, Philippines. It summarizes the key features and amenities of the development including its location in a pollution-free and accessible area, security features, easy access within the development, and outdoor recreation areas. It also provides sample payment options and financing terms, required documentation, and answers to frequently asked questions about the development.
Lions Park Residences is a low-rise condominium development located near Makati and Ortigas business districts with amenities such as a pool, park, and commercial area. The development offers studio, 1-bedroom, 2-bedroom, and 3-bedroom units that are an excellent investment for OFWs and retirees. Quadrillion Property Management provides property management services for homeowners.
Lions Park Residences is a low-rise condominium development located near Makati and Ortigas business districts with amenities like a pool, park, and commercial area. The development offers studio, 1-bedroom, 2-bedroom, and 3-bedroom units that are an excellent investment for OFWs and retirees. Quadrillion Property Management provides property management services. The development is near transportation and amenities while offering affordable prices and payment plans.
Lions Park Residences is a low-rise condominium development located near Makati and Ortigas business districts. It offers studio, 1-bedroom, 2-bedroom, and 3-bedroom units. Amenities include a multi-purpose hall, landscaped central park with koi pond and children's play area, resort-style swimming pool, and barbecue pits. The development is well-located and provides homeowners with property management services.
Lions Park Residences is a low-rise condominium development located near Makati and Ortigas business districts with amenities such as a pool, park, and commercial area. The development offers studio, 1-bedroom, 2-bedroom, and 3-bedroom units that are an excellent investment for OFWs and retirees. Quadrillion Property Management provides property management services for homeowners.
The document summarizes key details about a residential subdivision called Ville de Palme located in Brgy. Gen. Trias, Cavite, Philippines. It provides information on why buyers choose this location, available house models and features, amenities, financing options, sample computations, and factors to consider when buying a house. Only a few units are available. Interested buyers are encouraged to contact the developer immediately.
The document provides information on the Sentrale Residences condominium development project. It is an 859 square meter property located in Makati City with 228 residential units across 16 floors. The ground and second floors will feature commercial spaces, while the third and fourth floors will have parking. Unit sizes range from studios to 2-bedroom suites. The development aims to provide residents with accessibility to schools, hospitals, transportation and commercial areas in a central Makati location.
Project presentation of Sentrale Makati (Buendia Avenue, Makati City). Affordable Makati condominium starting at Php 2,160,000 per unit (residential unit). Limited commercial units are also available for sale. For more details, please contact Mike Pacheo at +63917-8069537 / mikepacheo@me.com.
Lancaster Residences is a subdivision located at Alapan, Imus, Cavite. It offers 2 house units, The Villas (1-storey ready for occupancy) and Manor (2-storey townhouse).
Lions Park Residences is Rent to own project cater mid level employees, ofw and pagibig members too. Best enjoys to those who want to live in Nature Friendly area but still in the heart of Metro Manila
Bayo Condotel, Corner Scout Bayoran & Scout Tuazon, Near ABS -CBN. RFO by de...chonaravidas
Bayo Condotel & Suites is a 12-story mixed-use development located in Quezon City consisting of 160 residential units, 40 condotel units, and 7 commercial units. The project offers amenities such as a roof deck, WiFi, and 24-hour security. Residential units range from studio to 3-bedroom units and condotel units provide hotel services and income from rental operations. The development is located near schools, hospitals, and commercial areas in a growing part of Quezon City close to major transportation routes.
This document provides information on a proposed residential development located in Makati City, Philippines. It includes details on unit types and sizes, amenities, payment plans, and target markets. The development consists of studio and 1-bedroom units ranging from 24.5 to 36 square meters. It is strategically located near schools, hospitals, transportation, commercial areas, and entertainment. Amenities include swimming pools, a function room, gardens, and a gym. Payment plans offer discounts for cash purchases or options to pay through bank financing or an in-house plan over 30 months. The target markets are identified as students, young professionals, families, overseas workers, and foreign expatriates.
Project presentation of Rivergreen Residences (Sta. Ana, Manila City). For more details, please contact Mike Pacheo at +63917-8069537 / mikepacheo@me.com.
This document provides information on Lumira, a new residential development within NUVALI, the largest eco-community in the Philippines. Lumira will have 558 lots developed over two phases, with amenities like a clubhouse designed by renowned architects Budji Layug and Royal Pineda, a central park, pocket parks, and walking and biking trails. It is located adjacent to existing communities within NUVALI and will feature neighborhood clusters designed for a tight-knit community feel. Pricing for lots starts from P5.6 million to P14.9 million.
A 10-year pipeline sold out in 2 years!
The document provides details about the development of Verve Residences, including unit breakdowns, floor plans, amenities, payment terms, and location within the Bonifacio Global City development in the Philippines. Key details include 451 total units ranging from studios to 3-bedroom units and urban villas, indoor and outdoor amenities, and standard and promotional payment terms for buyers.
This document provides information about Circuit Makati, a mixed-use development project in Makati, Philippines. The project will transform the former Santa Ana Race Track site into a lifestyle destination featuring retail, dining, offices, hotels and residential condominiums. It will also include an event grounds that can accommodate large concerts and festivals. The first phase will include Circuit Lane, a retail strip, and the Solstice Towers residential condominiums consisting of two towers with a total of 855 units ranging from studios to two-bedrooms.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help alleviate symptoms of mental illness and boost overall mental well-being.
The document summarizes an upcoming condo development called Solinea in Cebu, Philippines. Some key details:
- It will be located in Cebu Business Park across from Ayala Center Cebu, in a prime city location.
- Amenities will include multiple pools, a clubhouse, gym, and 6,000 square meters of landscaped open spaces, providing a resort-like lifestyle.
- The development will include two towers with over 1,100 units, from studios to 3-bedroom penthouse units, as well as retail space.
This document provides information about a new residential development called Marquee Residences located in Angeles City, Pampanga, Philippines. Some key details include:
- It will have 2 towers with 199 total units ranging from 1-3 bedrooms.
- Amenities will include a pool, function room, gym, and garden areas.
- Unit finishes will include laminate and tile flooring, granite countertops, and ceramic tile in bathrooms.
- The development is part of Ayala Land's Marquee mixed-use project and is positioned as the signature address in Angeles City.
The document describes The Lerato, a mixed-use development located in Makati City, Philippines. It consists of 3 residential towers with 569 total units, including 1007 studio units, 312 one-bedroom units, and 134 two-bedroom units. The development offers amenities such as an outdoor pool and jogging trail, as well as indoor amenities like a gym, function rooms, and roof deck bar. Tower 3 is highlighted as having 48 floors with typical floors containing 15 units, including 10 studios, 3 one-bedrooms, and 2 two-bedrooms.
The document discusses details of the Kroma Tower residential development project in Makati, Philippines, including its location in Legazpi Village, the layout and unit mix with studio, one-bedroom, and two-bedroom units, building amenities such as a pool and function room, and promotional details for investing in the development. Floor plans and images of units, amenities, and the building are also provided.
This document provides information on a new residential development called Kasa Luntian located in Tagaytay, Philippines. The development will include 6 buildings with 343 total units across 30,598 square meters of land. Amenities will include multiple pools, a jacuzzi, herb garden, and play areas. Unit types will range from studios to 3-bedroom penthouses. The development aims to provide a low-density, landscape-focused property with spacious units and amenities for a leisure lifestyle.
This document provides a project brief for an internal sales training on a new residential development called Ferndale Villas located in Quezon City. It includes details on the master plan such as the total land area, number of lots and unit mix. Amenities like a central park with a clubhouse, swimming pools and jogging paths are highlighted. Sample house plans are presented along with frequently asked questions about the development.
This document summarizes the key details of a new condominium development called Escala Salcedo. It is located in Salcedo Village, Makati on a rare 7,000 sqm land area. The development will include 258 residential units from 1-3 bedrooms and 4 penthouse units. It will feature designer amenities such as a gym, pool, and function rooms. Unit prices range from 6-21 million pesos depending on size and floor. The developer, Alveo Land, is known for innovative living concepts and track record of successful projects.
The document provides details on the masterplan, design, and amenities for a residential development project called The Veranda. It includes sections on the site location and context, conceptual plans, unit mix and sizes, floor plans, consultants involved, and renderings. The development will consist of four towers with a total of 902 units across two phases, with amenities like pools, gardens, and function rooms located in the central courtyard. Sustainable design features like bifurcation and natural ventilation systems are incorporated.
This document provides information on The Veranda residential development project including:
- The site plan layout with amenities like pools, gardens, and function rooms.
- Building details like the tower footprint, unit floor plans from studios to 3-bedrooms, and interior finishes.
- Consultants involved in the masterplanning, architecture, landscaping, and more.
- Payment terms and unit pricing ranging from PHP3.8-4.6M for studios to PHP14.2-16.5M for 3-bedrooms.
Ayala Land is developing a new business and lifestyle district called Arca South in Taguig City over 74 hectares. Arca South will be located near NAIA airport and Makati CBD, with direct access from the Skyway and C5/C6 Connector Road. Phase 1 of the development over the first 5 years will include 870,000 square meters of retail, office, and residential space with a P80 billion investment.
Ayala Land is developing a new business and lifestyle district called Arca South in Taguig City over 74 hectares. Arca South will be located near NAIA airport and Makati CBD, with direct access from the Skyway and C5/C6 Connector Road. Phase 1 of the development over the first 5 years will include 870,000 square meters of retail, office, and residential space with a P80 billion investment.
Ametta Place is a new boutique townhouse community being developed by Alveo Land in Pasig City. It will feature limited 2-3 story townhouse units arranged in clusters of 3-6 units per block within a 6 hectare site. The community will include amenities like a clubhouse, swimming pools, parks, and walking trails in a central but tranquil location close to major business districts. While the development plans are preliminary, the goal is to provide a comfortable and stylish living space for families to grow amidst an urban setting.
This document introduces Ametta Place, Ayala Land's first boutique townhouse development in Pasig. It will feature 280 low-density townhouse units within a 6.5 hectare gated community near important destinations. Residents will enjoy intimate living spaces, customized amenities, and open green spaces, including a main entrance, passive and active parks, and a clubhouse. Unit floorplans range from 127 to 183 square meters with finishes like wood floors, granite countertops, and mid-range bathroom fixtures. The development aims to provide a quiet and cozy living experience for urban families in Pasig.
The document summarizes Abreeza Residences, a mixed-use development project in Davao City, Philippines. It will include a 26-floor tower with 398 residential units, as well as retail and commercial spaces. Residents will have access to amenities like a swimming pool, clubhouse, function rooms, and landscaped outdoor spaces. The development is located within Abreeza, a lifestyle district near churches, hospitals, schools, and business centers.
This document provides information about a new residential project located at 8th Avenue, corner 36th St., Fort Bonifacio Global City. The 50-storey building will have 240 residential units ranging from 2 to 5 bedrooms. Amenities will include indoor facilities like a gym and outdoor areas like a lap pool. Residents will have access to hotel-style services and benefits through its affiliation with Hyatt. Construction is scheduled to begin in the fourth quarter of 2013 with completion targeted for the fourth quarter of 2016.
Stark Builders: Where Quality Meets Craftsmanship!shuilykhatunnil
At Stark Builders our vision is to redefine the renovation experience by combining both stunning design and high quality construction skills. We believe that by delivering both these key aspects together we are able to achieve incredible results for our clients and ensure every project reflects their vision and enhances their lifestyle.
Although we are not all related by blood we have created a team of highly professional and hardworking individuals who share the common goal of delivering beautiful and functional renovated spaces. Our tight nit team are able to work together in a way where we pour our passion into each and every project as we have a love for what we do. Building is our life.
Living in an UBER World - June '24 Sales MeetingTom Blefko
June 2024 Lancaster County Sales Meeting for Berkshire Hathaway HomeServices Homesale Realty covering the following topics: 1. VA Suspends Buyer Agent Payment Plan (article), 2. Frequently Used Terms in title, 3. Zillow Showcase Overview, 4. QuickBuy commission promotion, 5. Documenting Cooperative Compensation, 6. NAR's Code of Ethics - Mass Media Solicitations, 7. Is it really cheaper to rent? 8. Do's and Don't's when Terminating the Agreement of Sale, 9. Living in an UBER World
Signature Global TITANIUM SPR | 3.5 & 4.5BHK High rise Apartments in Gurgaonglobalsignature2022
Signature Global TITANIUM SPR launched a high rise apartments in Gurgaon . In this project Signature Global offers 3.5 & 4.5 BHK high rise Apartment at sector 71 Gurgaon SPR Road. Signature Global Titanium SPR is IGBC Gold certified, a testament to our commitment to sustainability.
Andhra Pradesh, known for its strategic location on the southeastern coast of India, has emerged as a key player in India’s industrial landscape. Over the decades, the state has witnessed significant growth across various sectors,
The SVN® organization shares a portion of their new weekly listings via their SVN Live® Weekly Property Broadcast. Visit https://svn.com/svn-live/ if you would like to attend our weekly call, which we open up to the brokerage community.
Listing Turkey - Piyalepasa Istanbul CatalogListing Turkey
We are working around the clock to transform a long-time dream into reality. As a result, Piyalepasa Istanbul will be the largest privately developed urban regeneration project in Turkey.
THE NEIGHBORHOOD WE HAVE BEEN LONGING FOR IS COMING TO LIFE
The good old days of the Piyalepasa neighborhood are being brought back to life with Piyalepasa Istanbul houses, residences, offices, hotels and a pedestrianized shopping avenue.
The wide streets of this 82.000 square meter development conveniently face the main boulevard in a prime Beyoglu location. “Piyalepaşa İstanbul” stands out as the only project designed to offer a neighborhood lifestyle, complete with its grocers, bagel sellers and greengrocer. Piyalepasa Istanbul has all the values to make it an authentic neighborhood, our very own community.
A NEIGHBORHOOD FULL OF LIFE, IN THE HEART OF THE CITY!
“Piyalepaşa İstanbul” is a “mixed-use” concept containing all the elements for a vibrant social life with houses, residences, offices, hotels and high street shopping.
“Piyalepaşa İstanbul” will take the liveliness of Istanbul into its heart. The elegant sparkle of Nisantasi, the young and colorful Besiktas, the variety and multicultural heritage of Istiklal Street will all be contained within the streets of this neighborhood.
“Piyalepaşa İstanbul” bears traces of the most beautiful examples of Turkish architecture from the Seljuks to the Ottomans and from Anatolia to Rumelia. With its graded facades, wide eaves, bay windows, pools, and interior courtyard systems, it offers a new living space without disrupting the city’s silhouette and neighborhood.
“Piyalepaşa İstanbul” is the new attraction of this splendid city.
TO BE AT THE CENTER OF ISTANBUL… THIS IS REAL LUXURY!
With its proximity to D-100 highway, connecting roads and tunnels, “Piyalepaşa İstanbul” is only minutes away from Kabatas, Besiktas, the Golden Horn and Karakoy.
“Piyalepaşa İstanbul” is close to the prestigious new Istanbul Court House, a major hospital, the Perpa trade center and the city’s most lively neighborhoods. With its shuttle service to Okmeydani Metrobus station, Sishane and the Court House subway stations, “Piyalepaşa İstanbul” will provide you with the most convenient transport connections.
https://listingturkey.com/property/piyalepasa-istanbul/
Anilesh Ahuja Pioneering a Paradigm Shift in Real Estate Success.pptxneilahuja668
Anilesh Ahuja journey is a testament to the power of vision, resilience, and unwavering determination. As a visionary leader, he continues to inspire and empower others to dream big and challenge the status quo. His legacy extends far beyond the realm of real estate, leaving an indelible mark on the industry and the world at large.
36,778 sq. ft. building; Zoning: SE (Suburban Employment): The (SE) District allows numerous commercial site uses; Passenger elevator; Private and common restrooms; Fully sprinkled; Data center with a grounded floor and a specialized HVAC system; 60 KVA back-up generator; Building/pylon signage; Potential to purchase adjacent parcels; Sale Price: $4,413,360
Why is Revit MEP Outsourcing considered an as good option for construction pr...MarsBIM1
Outsourcing MEP modeling services require effective collaboration and coordination amongst multiple engineering trades. The engineers and the designers often change the details of the MEP projects, but the work of Revit MEP drafting services is having the master plan and model of the complete project. To have proper coordination and installation, there is a need to execute the project effectively. Hence, the work of Revit family creation facilitates the MEP engineers.
Sunrise Infra Properties Company Profile Pradeep.pdf
Chateau Elysee
1.
2. Advantages of Owning a Unit in
Chateau Elysee
• Prime Location
– Easy access to the airport, CBDs, and
– Surrounded by a thriving community (Schools, hospitals, malls, etc)
• Impressive Development
– Biggest Condominium Development within the area of Doña Soledad with
4.7has of Land area
– Wide array of amenities (Clubhouse, swimming pools, basketball/volleyball
and tennis courts, etc.)
• RFO Units
– All units at Chateau Elysee are ready for occupancy
• Solid Investment
– Provides good ROI rates and
– Self-liquidating (since units are RFO).
• Leading Developer in the Philippines
– SM Development Corporation
– Part of SM Group of Companies (SM Malls, Banco de Oro, China Bank, SM
Hotels, etc.)
3. Prime Location
• Location:
– Doña Soledad Ave. Extension, Bicutan,
Parañaque
– Directions: From South Luzon Expressway,
take Bicutan exit, from SM Bicutan, follow
Doña Soledad Avenue until you reach
Chateau Elysee
• Easy access to key places :
– Parañaque Hospital ( 5 mins)
– SM City Bicutan (10 mins)
– International Airport (15 mins)
– Makati CBD (20 mins)
5. Impressive Development
• Biggest Condominium Development within the area of Doña Soledad
– The most spacious, in terms of Land Area (4.7has)
• Wide array of amenities
– Clubhouse with Function Halls
– Fitness Gym
– Playground Area
– 25-meter Lap Swimming Pool
– Kiddie Pool
– Wading Pool
– Children’s Play Area
– Basketball / Volleyball
– Tennis Court
6. Ready for Occupancy = Ready for Investment
Typical Available Units 1BR 2BR 3BR
Ave Unit Size 23.3 sqm 48.5 sqm 58.8 sqm
Ave Php/SQM 60,142 55,597 53,133
Ave Unit Price 1,404,000 2,697,000 3,124,000
Cash Discount 23% 1,081,080 2,076,690 2,405,480
Deferred Term 13% 1,221,480 2,346,390 2,717,880
Ave Rental Rate per Unit Low 8,000 13,000 20,000
(Php / Month) High 10,000 15,000 23,000
Estimated Annual Return
(ROI)
Low 7.9% 6.6% 8.8%
High 11.1% 8.7% 11.5%
RFO Units
• All units at Chateau Elysee are ready for occupancy
Solid Investment
• Provides good ROI rates and
• Self-liquidating (since units are RFO).
7. Leading Developer in the Philippines
is the leading residential property developer in the Philippines
focusing on the premium middle market, expertly balancing key housing factors of
quality, style, durability, and affordability.
We are part of the SM Group of companies with interests in retail and mall operations,
real estates development, hotels and convention centers, banking and finance.
10. Project Concept
Development Concept:
• Theme:
– Modern city living inspired with a mix of Mediterranean and
French Architecture
– Chateau: a country house, castle, or manor house that is built
as residence of the Governor, President or State Leader
• Condominium Complex of Choice
– It is the condominium subdivision that is specifically designed
to be the number one choice within the area
Designed for:
• Starting Families
– Newly weds
• Young Professionals
– Pilots
– Flight Attendants
• Overseas Workers
• Investor Market
11. Site Development Plan
Land Area - 4.7 hectares
Design:
• 6 Clusters
• 4 Buildings per Cluster
• 6 to 7 floors per Cluster
12. Amenities & Features
• Recreational Facilities and Amenities
– Clubhouse with Function Halls
– Fitness Gym
– Playground Area
– 25-meter Lap Swimming Pool
– Kiddie Pool
– Wading Pool
– Children’s Play Area
– Basketball / Volleyball
– Tennis Court
• Facilities and Services
– Two (2) Scenic Passenger Elevators
– 24-hour Security
– Automatic Fire Sprinkler System
– Centralized Overhead Water Tank for
Sufficient Water Supply
– Provision for Garbage Disposal Area
– Stand-by Generator Set for Common Area
– Spacious Lobby and Corridors
– Individual Mail Boxes
– Individual Electric and Water Meter
17. Only the 1-bedroom standard units (25.17 and 24 sqm) facing
the Courtyard are FURNISHED UNITS.
Unit Furnishings for Seine
Cluster 1-br Units (Courtyard View)
LIVING ROOM 1 pc Sofa
1 pc Side table
1 pc LCD TV
1 pc DVD player
DINING ROOM 1 pc Dining table
Dining Chairs
KITCHEN 1 pc 2-burner electric cooktop
1 pc Rangehood
1 pc Refrigerator
1 set overhead and under counter
kitchen cabinet
BEDROOM 1 pc double bed with frame,
mattress and bedsheet
1 pc wardrobe closet
2 pcs pillows with pillowcase
1 pc 1.5 HP Aircon
BATHROOM
1 pc water closet
1 pc lavatory
1 pc soap holder
1 pc tissue holder
1 pc towel bar
1 pc shower glass enclosure
1 pc facial mirror
1 pc laundry clothesline
19. Unit Finishes
• Ceramic Floor Tiles
• Painted Wall and Ceiling
• Modular Kitchen Cabinet and Granite Kitchen Counter Top
• Provision for Cable TV, Telephone and Internet Facilities
• Unit Ceiling Height (3 meters)
• Toilet and Bath with Ceramic Tiles
• Complete Water Closet and Shower Fixtures
• Provision for Water Heater at Master’s Bedroom T & B
20. Unit Numbering
CLUSTER NAME CLUSTER NO. BUILDING CLUSTER NO. BUILDING NO. UNIT NO. SAP NO.
Concorde 1 A 1 B1 0101 1B10101
Concorde 1 B 1 B2 0101 1B20101
Concorde 1 C 1 B3 0101 1B30101
Concorde 1 D 1 B4 0101 1B40101
Lafayette 2 A 2 B1 0101 2B10101
Lafayette 2 B 2 B2 0101 2B20101
Lafayette 2 C 2 B3 0101 2B30101
Lafayette 2 D 2 B4 0101 2B40101
Eiffel 3 A 3 B1 0101 3B10101
Eiffel 3 B 3 B2 0101 3B20101
Eiffel 3 C 3 B3 0101 3B30101
Eiffel 3 D 3 B4 0101 3B40101
Seine 4 A 4 B1 0101 4B10101
Seine 4 B 4 B2 0101 4B20101
Seine 4 C 4 B3 0101 4B30101
Seine 4 D 4 B4 0101 4B40101
Vendome 5 A 5 B1 0101 5B10101
Vendome 5 B 5 B2 0101 5B20101
Vendome 5 C 5 B3 0101 5B30101
Vendome 5 D 5 B4 0101 5B40101
Ritz 6 A 6 B1 0101 6B10101
Ritz 6 B 6 B2 0101 6B20101
Ritz 6 C 6 B3 0101 6B30101
Ritz 6 D 6 B4 0101 6B40101
ORIGINAL (CORE) CURRENT (SAP)
21. Payment Terms (Residential Units)
Payment Term
Promo
Discount
DP 1
Rate
Months
to Pay
DP 2
Rate
Months
to Pay
Balance
Spot Cash 21% 100% 1 -- -- --
Deferred Cash 11% 100% 12 -- -- --
Spread DP
(at least 50% up)
19% 50% up 2 -- --
Cash or thru
bank
Spread DP
(at least 30% to 40%)
16%
30% to
40%
2 -- --
Cash or thru
bank
Spread DP
(at least 10% to 20%)
14%
10% to
20%
2 -- --
Cash or thru
bank
Spread DP
[ 15%(12mos) - 85% ]
-- 15% 12 -- --
Cash or thru
bank
Spread DP
[ 10%(2)-10%(10)-80%]
-- 10% 2 10% 10
Cash or thru
bank
* VALID for units reserved until March 31, 2013 only.
22. Payment Terms (Parking Slots)
Payment Term
Promo
Discount
DP 1
Rate
Months
to Pay
DP 2
Rate
Months
to Pay
Balance
Spot Cash 10% 100% 1 -- -- --
Deferred Cash -- 100% 36 -- -- --
Spread DP
[ 10% - 20%(10) - 70%]
2% 10% 1 20% 10
Cash or thru
bank
Spread DP
[ 15% - 35%(22) - 50%]
-- 15% 1 35% 22
Cash or thru
bank
* VALID for units reserved until March 31, 2013 only.