This project report was submitted by three students - Mr. Jadhav Rahul Suresh, Mr. Kadam Ganesh Rajaram, and Mr. Kumbhar Amol Ramchandra - to their professor Dr. Mrs. S.B. Patil at Dr. J.J. Magdum College of Engineering in fulfillment of their Bachelor of Electronics Engineering degree. The report describes a tracking device software created for a machine shop. It has been reviewed and approved by the Department Research Committee. The students acknowledge and thank their guide Dr. Patil and the Head of Department Dr. V.V. Patil for their support and guidance on the project.

1. A
PROJECT REPORT
ON
“TPM Tracking Device For Machine Shop (S/W)”
SUBMITTED BY
Mr. JADHAV RAHUL SURESH
Mr. KADAM GANESH RAJARAM(9561123429)
Mr. KUMBHAR AMOL RAMCHANDRA
Under Guidance of
Dr. Mrs. S.B.PATIL
Dr.J.J.Magdum College of Engineering, Jaysingpur
DEPARTMENT OF ELECTRONICS ENGINEERING
Academic Year
2014-2015

2. Dr.J.J.Magdum College of Engineering, Jaysingpur
DEPARTMENT OF ELECTRONICS ENGINEERING
CERTIFICATE
This is to certify that the project entitled,
“TPM Tracking Device For Machine Shop (S/W)”
is being submitted in partial fulfilment of the requirement for the degree of Bachelor
of Electronics Engineering under Shivaji University during the academic year 2014-
2015. This is the result of original work completed by,
Mr. JADHAV RAHUL SURESH (Roll No. 73)
Mr. KADAM GANESH RAJARAM (Roll No. 74)
Mr. KUMBHAR AMOL RAMCHANDRA (Roll No. 75)
And that, I have instructed and guided them for the said work from time to time and
found them to be satisfactory and progressive.
Dr. Mrs. S. B. Patil Dr. Mrs. V.V. Patil
Guide H.O.D.(ETRX)
Dr. A. K. Gupta
I/C Principal

3. Dr.J.J.Magdum College of Engineering, Jaysingpur.
DEPARTMENT OF ELECTRONICS ENGINEERING
Academic Year
2015-2016
CERTIFICATE
This is to certify that, the project titled
“TPM Tracking Device For Machine Shop (S/W)”
Is presented before Department Research Committee (DRC) by
Sr. No. Name Roll No.
1. Jadhav Rahul Suresh 73
2. Kadam Ganesh Rajaram 74
3. Kumbhar Amol Ramchandra 75
Under guidance of Dr. Mrs.S.B. Patil for the academic year 2014-2015.
The DRC has consented to give approval for the said project.
Head,
Department of Research Committee (DRC)
Department of Electronics Engineering

4. ACKNOWLEDGEMENT
Gratitude is the hardest emotion to express often one does not find adequate
words to convey that entire one feels.
We are very thankful to Dr. Mrs. Patil S.B. our project guide who played
defining role in shaping this report. Without her constant support, guidance and
assistance this report would not have been completed. We are very much glad to
express our gratitude towards her guidance. Every help and friendly support which
has been given by our guide.
We would also like to thank Prof. Dr. Mrs. V.V.Patil, H.O.D. Electronics
Department who with such derlying interest reviewed and endorsed this project
report.
Mr. JADHAV RAHUL SURESH
Mr. KADAM GANESH RAJARAM
Mr. KUMBHAR AMOL RAMCHANDRA
B.E. (Electronics)
Dr. J. J. Magdum College of Engineering, Jaysingpur.
Date - __/__/2015
Place - Jaysingpur