This document provides instructions for disassembling and assembling the piston pump of a CS-533E vibratory soil compactor. It describes the required tools and gives step-by-step instructions to remove, disassemble, and assemble the pump. The instructions include removing seals, bolts, valves, housings, and other components. Precautions are provided to clean parts thoroughly and check components for wear.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
2. Shutdown SIS
Previous Screen
Product: VIBRATORY COMPACTOR
Model: CS-533E VIBRATORY COMPACTOR TBE
Configuration: CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
CP-533E and CS-533E
Vibratory Soil Compactors
Machine Systems
Media Number -KENR3664-05 Publication Date -01/12/2009 Date Updated -17/12/2009
i01961191
Piston Pump (Vibratory) - Assemble
SMCS - 5070-016; 5652-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning
fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be
deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or
damaged, use new parts for replacement. Dirt and other contaminants can damage the precision
component. Perform assembly procedures on a clean work surface. Keep components covered and
protected at all times.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the
components, if necessary.
1/11
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g01018831
1. Install seal (35) and seal (36) .
Illustration 2 g01018830
2. Install bolts (34) and cover (35) .
Illustration 3 g01018829
3. Install bearings (33) .
2/11
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g01018828
4. Raise the temperature of bearing (31) .
5. Install bearing (31) onto shaft (30) .
6. Install retaining ring (32) .
Illustration 5 g01018827
7. Install the bearings onto the swashplate.
8. Install swashplate (29) and shaft (30) .
3/11
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 6 g01018826
9. Install O-ring seal (27) and O-ring seal (28) .
Illustration 7 g01018824
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Use Tooling (A) and a suitable press in order to install retaining ring (23) .
4/11
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g01018825
11. Install retaining ring (23), spring (24), washer (25), and pins (26) into barrel (19) .
Illustration 9 g01018823
12. Install retainer (22) .
Illustration 10 g01018821
13. Install piston (21) into plate (20) .
5/11
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 13 g01018818
16. Install bearing (18) .
Illustration 14 g01018817
17. Install backup ring (17), O-ring seal (16), spring (15), and spring (14) into plug (13) .
Illustration 15 g01018816
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
18. Install plugs (13) .
7/11
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 24 g01018806
27. Install bolts (2) and solenoid (3) .
Illustration 25 g01018805
28. Install retaining ring (1) .
End By: Install the piston pump. Refer to Disassembly and Assembly, "Piston Pump (Vibratory) -
Install".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Mar 12 22:48:35 UTC+0800 2021
11/11
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 30...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: VIBRATORY COMPACTOR
Model: CS-533E VIBRATORY COMPACTOR TBE
Configuration: CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
CP-533E and CS-533E
Vibratory Soil Compactors
Machine Systems
Media Number -KENR3664-05 Publication Date -01/12/2009 Date Updated -17/12/2009
i01942502
Piston Pump (Vibratory) - Install
SMCS - 5070-012; 5652-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-2082 Lifting Hook 1
Illustration 1 g01010616
1. Attach a suitable lifting device and Tooling (A) to vibratory pump (2). Install vibratory
pump (2) and two bolts (4). The weight of the vibratory pump is approximately 40 kg (88
lb).
1/2
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 2 g01010615
2. Connect harness assembly (3) .
3. Connect four hose assemblies (1) on vibratory pump (1) .
End By: Install the steering pump. Refer to Disassembly and Assembly, "Gear Pump (Steering) -
Install".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Mar 12 22:49:31 UTC+0800 2021
2/2
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: VIBRATORY COMPACTOR
Model: CS-533E VIBRATORY COMPACTOR TBE
Configuration: CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
CP-533E and CS-533E
Vibratory Soil Compactors
Machine Systems
Media Number -KENR3664-05 Publication Date -01/12/2009 Date Updated -17/12/2009
i01942613
Piston Pump (Drum Propel) - Remove
SMCS - 3203-011; 5070-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-2082 Lifting Hook 1
ZZ
6V-9508 Plug 4
6V-9829 Cap As 4
6V-9509 Plug 2
6V-9830 Cap As 2
6V-9511 Plug 3
6V-9832 Cap As 3
Start By:
A. Remove the vibratory pump. Refer to Disassembly and Assembly, "Piston Pump
(Vibratory) - Remove".
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN
PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS
SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
1/4
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 1 g01010949
1. Loosen jam nut (1). Remove cotter pin (2) and pin (3). Move cable assembly (4) out of the
way.
Illustration 2 g01010951
2. Remove hose assembly (5) and hose assembly (6) .
3. Remove hose assembly (8) .
4. Disconnect harness assembly (7) .
2/4
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 3 g01010952
5. Remove bolt (9) and move linkage (10) out of the way.
6. Disconnect three hose assemblies (11) from propel pump (12) .
Illustration 4 g01010954
Illustration 5 g01010956
3/4
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 7. Attach a suitable lifting device and Tooling (A) to propel pump (12). Remove bolts (13) and
remove propel pump (13) from the machine. The weight of the propel pump is
approximately 46 kg (102 lb).
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Mar 12 22:50:27 UTC+0800 2021
4/4
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: VIBRATORY COMPACTOR
Model: CS-533E VIBRATORY COMPACTOR TBE
Configuration: CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
CP-533E and CS-533E
Vibratory Soil Compactors
Machine Systems
Media Number -KENR3664-05 Publication Date -01/12/2009 Date Updated -17/12/2009
i02370479
Piston Pump (Drum Propel) - Disassemble
SMCS - 3203-015; 5070-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
B 8H-0663 Bearing Puller Gp 1
C Page 1P-0074 Bearing Puller Gp 1
Start By:
A. Remove the piston pump. Refer to Disassembly and Assembly, "Piston Pump (Axle Propel
and Drum Propel) - Remove".
Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior
of the components should be thoroughly cleaned. This will help to prevent dirt from entering the
internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform
disassembly procedures on a clean work surface. Keep components covered and protected at all
times.
Note: Regular maintenance and frequent inspections are routine precautions. Practice preventive
maintenance before damage occurs. Preventive maintenance can help to avoid a failure. If a failure
occurs, an accurate diagnosis of the cause can prevent a recurrence. Information is available to
analyze the failures of the piston pump and the motor. Refer to Special Publication, SEBD0641,
"Analyzing Axial Piston Pump and Motor Failures".
1/15
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Note: After disassembly has been completed, check the condition of all the components. Refer to
Guideline For Reusable Parts, SEBF8032, "Piston Pumps and Motors". During reconditioning,
correct any conditions that might have caused the original failure. Information is available to
analyze failures on the piston pumps and the motor. Refer to Special Publication, SEBD0641,
"Analyzing Axial Piston Pump and Motor Failures".
Illustration 1 g01019071
1. Remove bolts (2) and valve (3) from housing (1) .
Illustration 2 g01019077
2. Remove O-ring seals (4) .
2/15
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 3 g01019078
3. Remove bolts (5) and flange (6) .
Illustration 4 g01019079
4. Remove O-ring seal (7) .
5. Remove bolts (8) and head (9) .
Illustration 5 g01019080
3/15
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. 6. Remove plate (10) .
Illustration 6 g01019081
7. Remove O-ring seal (11).
8. Use Tooling (C) in order to remove bearing (12) .
Illustration 7 g01019082
9. Remove clip (13) and solenoid (14) .
4/15
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 13 g01019088
15. Remove plug (20) .
Illustration 14 g01019089
16. Remove O-ring seal (21) from plug (20) .
Illustration 15 g01019090
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
7/15
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. 17. Remove valve (22) .
Illustration 16 g01019091
18. Remove spring assembly (23), O-ring seal (24), and backup ring (25) from valve (22) .
Illustration 17 g01019092
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
19. Remove valve (26) .
8/15
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 18 g01019093
20. Remove spring assembly (27), O-ring seal (28), and backup ring (29) from valve (26) .
Illustration 19 g01019095
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
21. Remove valve (30) .
9/15
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 3054...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Illustration 20 g01019096
22. Remove spool (36), guide (35), plunger (32), spring (34), guide (35), and O-ring seal (36)
from valve (30) .
Illustration 21 g01019097
23. Remove O-ring seal (37) and barrel (38) .
Illustration 22 g01019099
10/15
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 30...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. 24. Remove pistons (39) and retaining plate (40) from barrel (38) .
Illustration 23 g01019221
25. Remove retainer (41) from barrel (38) .
Illustration 24 g01019223
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
26. Use Tooling (A) and a suitable press in order to remove retaining ring (42) .
11/15
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 30...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. Illustration 25 g01019225
27. Remove retaining ring (42), spring (43), washer (44), and pins (45) from barrel (38) .
Illustration 26 g01019226
28. Remove seal (46), O-ring seal (48), retaining ring (46A), and shaft (47) .
12/15
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 30...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
31. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
32. Illustration 27 g01019227
29. Remove retaining ring (49). Use Tooling (B) in order to remove bearing (50) from shaft
(47) .
Illustration 28 g01019229
30. Remove swashplate (51) .
Illustration 29 g01019230
31. Remove bearing (52) and pin (53) from swashplate (51) .
13/15
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 30...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
33. Illustration 30 g01019232
32. Remove bearing (54) from swashplate (51) .
Illustration 31 g01019318
33. Remove pin (55) and slide (56) from bearing (54) .
Illustration 32 g01019330
34. Remove bolts (57) and cover (58) .
14/15
CS533E Vibratory Soil Compactor TBE00001-UP (MACHINE) POWERED BY 30...
2021/3/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...