Caterpillar cat 962 l wheel loader (prefix sxs) service repair manual (sxs00001 and up)

Service Repair Manual
Models
962L Wheel Loader

Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962L WHEEL LOADER SXS
Configuration: 962L Wheel Loader SXS00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
950M and 962M Wheel Loader Machine Systems
Media Number -M0071426-02 Publication Date -01/10/2011 Date Updated -24/05/2018
i05337983
Piston Pump (Implement) - Disassemble
SMCS - 5070-015-FD; 5070-015-II; 5070-015; 5084-015-QP; 5084-015
S/N - LXX1-20200
S/N - MTN1-600
S/N - SXS1-20200
S/N - TNS1-900
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 421-5661 Lifting Eye Assembly 2
B 154-6360 Forcing Bolt 2
Start By:
a. Remove the implement pump.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/12
962L Wheel Loader SXS00001-UP (MACHINE) POWERED BY C7.1 Engine(M006...
2020/4/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03381353
1. Remove bolts (1), pump control group (2), and the O-ring seals.
2. Remove elbow assembly (3) and adapter (4).
3. Remove plugs (5) and the O-ring seals from pump control group (2).
2/12
2020/4/7

Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Remove adapter (12), O-ring seal (11), retainer (10), spring (9), spring (8), retainer (7), and
spool (6) from pump control group (2).
3/12
2020/4/7

5. Remove bolts (14) from head assembly (13).
6. Use Tooling (A) and a suitable lifting device to remove head assembly (13) pump body
(15). The weight of head assembly (13) is approximately 25 kg (54 lb).
7. Remove port plate (16) from head assembly (13).
4/12
2020/4/7

Note: Measure setscrew (18) height for reassembly purposes.
8. Remove nuts (17) and set screws (18) from head assembly (13).
9. Remove plug (19), plug (20), and the O-ring seals from head assembly (13).
10. Remove bias actuator (21), spring (22), and control actuator (23) from pump body (15).
5/12
2020/4/7

11. Place pump body (15) horizontally and remove rotating group (24).
12. Remove pistons (25) and retainer (26).
6/12
2020/4/7

13. Remove hold-down ball (27), spacers (28), and spring set (29).
14. Remove swashplate (30) from pump body (15).
7/12
2020/4/7

15. Remove bearing assemblies (31) from swashplate (30).
16. Remove bolts (33), retainers (34), and actuators (32) from swashplate (30).
8/12
2020/4/7

17. Remove plugs (35), adapter (36), and the O-ring seals.
18. Remove bearing cups (37) and O-ring seal (38) from pump housing (15).
19. Remove bolts (39) from pump housing (15).
9/12
2020/4/7

20. Use Tooling (B) to remove seal retainer (40).
21. Remove O-ring seal (41), lip seals (42), and O-ring seals (43) from seal retainer (40).
22. Remove shaft assembly (44) from pump housing (15).
10/12
2020/4/7

23. Remove retaining ring (45) from shaft assembly (44).
24. Use a suitable press in order to remove bearing (46) from shaft assembly (44).
25. Remove bolts (47) and cover (48) from the pump housing.
11/12
2020/4/7

26. Remove O-ring seal (49) from cover (48).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Apr 7 00:56:31 UTC+0800 2020
12/12
2020/4/7

Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962L WHEEL LOADER SXS
Configuration: 962L Wheel Loader SXS00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
950M and 962M Wheel Loader Machine Systems
Media Number -M0071426-02 Publication Date -01/10/2011 Date Updated -24/05/2018
i07322202
Piston Pump (Implement) - Disassemble
SMCS - 5070-015-FD; 5070-015-II; 5070-015; 5084-015-QP; 5084-015
S/N - LXX20201-UP
S/N - MTN601-UP
S/N - SXS20201-UP
S/N - TNS901-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-9130 Stand Assembly 1
1U-9129 Plate 1
B - M20 x 2.5 threaded rod 2
C 4C-8359 Eyebolt 2
D 1P-0510 Driver Gp 1
E 6V-2012 Depth Gage 1
F 421-5660 Lifting Eye Assembly 2
G 8H-0663 Bearing Puller 1
H 153-3568 Bolt 1
Start By:
1/15
2020/4/7

a. Remove the piston pump (implement).
1. Fasten piston pump (1) to Tooling (A). The weight of piston pump (1) is approximately
93 kg (205 lb).
2. Remove bolts (2) and valve assembly (3).
2/15
2020/4/7

3. Remove O-ring seals (4), (5), and (6) from valve assembly (3).
4. Remove elbow (7), plug (8), and the O-ring seals from valve assembly (3).
5. Remove plug (10), the O-ring seal, and plugs (9) from valve assembly (3).
3/15
2020/4/7

6. Remove plug (11), spring (12), spring (13), guide (14), and spool (15) from valve assembly
(3).
7. Remove screw (16), nut (17), O-ring seal (18), and guide (19) from plug (11).
8. Remove O-ring seal (20) from guide (19).
9. Remove the 2 top bolts (21).
4/15
2020/4/7

10. Install Tooling (B) and remove the remaining 2 bolts (21).
11. Use Tooling (C) and a suitable lifting device to remove head (22) from pump body (23).
Head (22) weighs approximately 32 kg (70 lb).
12. Remove Tooling (B) from pump body (23).
5/15
2020/4/7

13. Remove valve assemblies (24), O-ring seal (25), and control plate (26) from head (22).
14. Use Tooling (D) to remove bearing (27) from head (22).
15. Remove plugs (28).
16. Remove plug (29), plug (30), and the O-ring seals from head (22).
6/15
2020/4/7

17. Use Tooling (E) to measure the height of setscrew (31) for assembly purposes.
18. Remove nut (32) and setscrew (31) from head (22).
19. Use Tooling (F) and a suitable lifting device to remove pump body (23) from Tooling (A).
Pump body (23) weighs approximately 60 kg (133 lb).
20. Remove rotating group (33) from pump body (23).
7/15
2020/4/7

21. Remove pistons (34) and retainer (35) from barrel assembly (36).
22. Remove bearing (37) and springs (38) from barrel assembly (36).
23. Remove retaining ring (39) from pump body (23).
8/15
2020/4/7

24. Use a soft faced hammer to remove seal carrier (40) and shaft assembly (41) from pump
body (23).
25. Remove lip seals (42) from seal carrier (40).
26. Remove retaining ring (43) from shaft assembly (41).
9/15
2020/4/7

27. Use Tooling (G) and a suitable press to remove bearing (44) from shaft assembly (41).
28. Remove swashplate assembly (45), O-ring seals (46), and O-ring seals (47) from pump
body (23).
29. Remove plate (48) from swashplate assembly (45).
10/15
2020/4/7

30. Use Tooling (H) to remove stopper (49) from the pump body.
31. Remove O-ring seal (50) and backup ring (51) from stopper (49).
32. Remove piston (52) from pump body (23).
11/15
2020/4/7

33. Remove bearing (53) the from pump body.
34. Remove plug (54), the O-ring seal, and plug (55) from pump body (23).
35. Remove adapter (56) and the O-ring seal from pump body (23).
12/15
2020/4/7

Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.

36. Remove O-ring seals (57) from pump body (23).
37. Remove bolts (58) and cover (59) from pump body (23).
38. Use Tooling (E) to measure the height of setscrew (60) for assembly purposes.
13/15
2020/4/7

39. Remove nut (61) and setscrew (60) from cover (59).
40. Use Tooling (H) to remove stopper (62) from the pump body.
41. Remove plugs (62).
42. Remove O-ring seal (64) and backup ring (65) from stopper (63).
14/15
2020/4/7

Caterpillar cat 962 l wheel loader (prefix sxs) service repair manual (sxs00001 and up)

Recommended

Recommended

More Related Content

What's hot

What's hot (12)

Similar to Caterpillar cat 962 l wheel loader (prefix sxs) service repair manual (sxs00001 and up)

Similar to Caterpillar cat 962 l wheel loader (prefix sxs) service repair manual (sxs00001 and up) (20)

More from dikdkskmmdm

More from dikdkskmmdm (20)

Recently uploaded

Recently uploaded (20)

Caterpillar cat 962 l wheel loader (prefix sxs) service repair manual (sxs00001 and up)