This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjsekqazxkdmmem
This document provides instructions for disassembling and assembling components of an excavator final drive and travel motor. The disassembly process includes removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining rings, washers, planetary gears, roller bearings, and sun gear from the carrier assembly. The assembly process specifies installing components in reverse order and outlines proper torque specifications for bolts.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjskekmdm
This document provides instructions for removing and installing the final drive and travel motor on a 336E L excavator. It outlines 28 steps for disassembly, including draining oil, removing covers, hoses, bolts and the final drive/travel motor assembly. It also details 13 steps for installation, which is the removal process in reverse order. Proper cleaning, lubrication and torque specifications are noted to correctly reassemble the components.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using anti-seize compound on threads. The overall process involves carefully removing and reinstalling multiple components of the excavator's hydraulic system.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...hfhjskedme
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using a thread locking compound. The overall summary is that this provides detailed removal and installation instructions for an excavator travel motor, outlining over two dozen individual steps.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjkkekmdm
The document provides instructions for disassembling and assembling a travel motor. It details 27 steps for assembling the travel motor that include installing seals, springs, pistons, and other components in the proper order and orientation. Thirteen steps are listed for disassembling the final drive and travel motor assembly, which include removing hoses, bolts, and separating the final drive from the travel motor. Safety precautions are provided regarding the use of lifting devices to handle heavy components and releasing hydraulic pressure before disassembly.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...jfskemsemm
The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using anti-seize compound on threads. The overall process involves carefully removing and reinstalling multiple components of the excavator's hydraulic system.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjsekqazxkdmmem
This document provides instructions for disassembling and assembling components of an excavator final drive and travel motor. The disassembly process includes removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining rings, washers, planetary gears, roller bearings, and sun gear from the carrier assembly. The assembly process specifies installing components in reverse order and outlines proper torque specifications for bolts.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjskekmdm
This document provides instructions for removing and installing the final drive and travel motor on a 336E L excavator. It outlines 28 steps for disassembly, including draining oil, removing covers, hoses, bolts and the final drive/travel motor assembly. It also details 13 steps for installation, which is the removal process in reverse order. Proper cleaning, lubrication and torque specifications are noted to correctly reassemble the components.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using anti-seize compound on threads. The overall process involves carefully removing and reinstalling multiple components of the excavator's hydraulic system.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...hfhjskedme
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using a thread locking compound. The overall summary is that this provides detailed removal and installation instructions for an excavator travel motor, outlining over two dozen individual steps.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjkkekmdm
The document provides instructions for disassembling and assembling a travel motor. It details 27 steps for assembling the travel motor that include installing seals, springs, pistons, and other components in the proper order and orientation. Thirteen steps are listed for disassembling the final drive and travel motor assembly, which include removing hoses, bolts, and separating the final drive from the travel motor. Safety precautions are provided regarding the use of lifting devices to handle heavy components and releasing hydraulic pressure before disassembly.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...jfskemsemm
The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using anti-seize compound on threads. The overall process involves carefully removing and reinstalling multiple components of the excavator's hydraulic system.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual (FJH00001...jdkskmmdmd1
The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a travel motor. It details 27 steps for assembling the travel motor that include installing seals, springs, pistons, and other components in the proper order and orientation. Thirteen steps are listed for disassembling the final drive, which include removing the cover, gears, and planetary gear assembly. Personal injury warnings are provided and all components must be cleaned before assembly.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjsekqazxkdmmem
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...zatao0179249295
The document provides instructions for disassembling and assembling a travel motor. It describes in detail the 28 steps to disassemble the travel motor, removing components like seals, springs, pistons, and plates. It then lists the 13 steps to reassemble the travel motor, noting to clean all components first and apply loctite to bolts, and to torque bolts to the specified values. The final instruction is to install the reassembled travel motor.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...luanxianshi27
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 13 steps for removal, including draining fluids, disconnecting hoses, and removing bolts and covers. It also lists the required tools. For installation, it states to reverse the removal process and tighten bolts to the specified torque.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...cnp692569
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves removing seals, bearings, springs and other components from the motor housing. The assembly process details installing these components in reverse order and applying lubricant or threadlock where specified. Proper torque values are listed for fasteners. The instructions note to mark components' orientations before removal to aid reinstallation.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, carriers, bearings, and washers. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, sun gear, planetary gears, retain rings, washers and bearings.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...yqen95561858
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
The document suggests that if clicking the above button is invalid, the user should first download the document and then click the link to download the complete manual. It thanks the reader for their time.
The document provides instructions for disassembling and assembling the main hydraulic pump of a M315D Wheeled Excavator. It lists 34 steps for disassembly, removing components like pistons, springs, seals and bearings. It then lists 36 steps for assembly, replacing components and using tools to set specifications like the lift-off limitation. Precautions are provided to prevent contamination and release of spring forces during the process.
This document provides instructions for assembling the main hydraulic pump of an excavator model. It lists 49 steps and includes illustrations of each step. The steps include installing various parts like bearings, seals, pistons, springs, and valves. Tools needed are also listed. The summary concludes by stating to install the main hydraulic pump by referring to another section of the repair manual.
The document provides instructions for installing a swing drive on an excavator model M315D. It lists the required tools and parts. The procedure involves 28 steps, including installing bearings, seals, gears, and other components into the swing drive housing. Specific torque specifications and dimensional checks are listed to ensure proper assembly. Installation is completed by positioning the swing drive in the swing brake housing and securing it with bolts.
This document provides instructions for removing and installing a pilot control valve on a D10 track-type tractor. Key steps include:
1. Removing the right side console cover and disconnecting control rods and oil lines from the valve.
2. Removing bolts to take the valve off its mounting bracket.
3. Installing the valve by connecting oil lines and control rods and securing it with bolts back on the bracket.
This document provides instructions for disassembling and assembling the final drive of a D9R track-type tractor. It describes removing components such as the planetary carrier, gears, shafts, and hub. Various tools are required, including link brackets, a push-puller tool group, driver group, and hydraulic cylinder assembly. Precautions are given for using hydraulic cylinders and puller studs during disassembly. The multi-step process includes pressing, lifting, and removing components from the planetary carrier, sun gear, and hub.
1) The document provides instructions to disassemble and assemble the final drive of a D9R track-type tractor.
2) It describes using various tools to remove over 30 components of the final drive including gears, shafts, seals, and hubs.
3) Precautions are included when using hydraulic cylinders and heated components to disassemble pieces.
1) The document provides instructions for removing and installing the final drive planetary carrier in a D9R track-type tractor.
2) It describes using various tools to remove the carrier, hub components, seals, and gears. It also explains how to reinstall these parts in reverse order.
3) Fourteen steps are outlined for removal and thirteen steps for installation, ensuring proper alignment of parts and torquing of bolts.
The document provides instructions for disassembling and assembling the steering clutch and brake of a D7R track-type tractor. It describes 20 steps to disassemble the components and 19 steps to reassemble them. These include removing plates, seals, springs, and other parts, and replacing them in the reverse order. Tools required include link brackets and a driver group. Proper spring loading and seal installation are emphasized.
More Related Content
Similar to Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant Download.pdf
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual (FJH00001...jdkskmmdmd1
The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a travel motor. It details 27 steps for assembling the travel motor that include installing seals, springs, pistons, and other components in the proper order and orientation. Thirteen steps are listed for disassembling the final drive, which include removing the cover, gears, and planetary gear assembly. Personal injury warnings are provided and all components must be cleaned before assembly.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjsekqazxkdmmem
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...zatao0179249295
The document provides instructions for disassembling and assembling a travel motor. It describes in detail the 28 steps to disassemble the travel motor, removing components like seals, springs, pistons, and plates. It then lists the 13 steps to reassemble the travel motor, noting to clean all components first and apply loctite to bolts, and to torque bolts to the specified values. The final instruction is to install the reassembled travel motor.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...luanxianshi27
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 13 steps for removal, including draining fluids, disconnecting hoses, and removing bolts and covers. It also lists the required tools. For installation, it states to reverse the removal process and tighten bolts to the specified torque.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...cnp692569
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves removing seals, bearings, springs and other components from the motor housing. The assembly process details installing these components in reverse order and applying lubricant or threadlock where specified. Proper torque values are listed for fasteners. The instructions note to mark components' orientations before removal to aid reinstallation.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, carriers, bearings, and washers. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, sun gear, planetary gears, retain rings, washers and bearings.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...yqen95561858
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Similar to Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant Download.pdf (13)
The document suggests that if clicking the above button is invalid, the user should first download the document and then click the link to download the complete manual. It thanks the reader for their time.
The document provides instructions for disassembling and assembling the main hydraulic pump of a M315D Wheeled Excavator. It lists 34 steps for disassembly, removing components like pistons, springs, seals and bearings. It then lists 36 steps for assembly, replacing components and using tools to set specifications like the lift-off limitation. Precautions are provided to prevent contamination and release of spring forces during the process.
This document provides instructions for assembling the main hydraulic pump of an excavator model. It lists 49 steps and includes illustrations of each step. The steps include installing various parts like bearings, seals, pistons, springs, and valves. Tools needed are also listed. The summary concludes by stating to install the main hydraulic pump by referring to another section of the repair manual.
The document provides instructions for installing a swing drive on an excavator model M315D. It lists the required tools and parts. The procedure involves 28 steps, including installing bearings, seals, gears, and other components into the swing drive housing. Specific torque specifications and dimensional checks are listed to ensure proper assembly. Installation is completed by positioning the swing drive in the swing brake housing and securing it with bolts.
This document provides instructions for removing and installing a pilot control valve on a D10 track-type tractor. Key steps include:
1. Removing the right side console cover and disconnecting control rods and oil lines from the valve.
2. Removing bolts to take the valve off its mounting bracket.
3. Installing the valve by connecting oil lines and control rods and securing it with bolts back on the bracket.
This document provides instructions for disassembling and assembling the final drive of a D9R track-type tractor. It describes removing components such as the planetary carrier, gears, shafts, and hub. Various tools are required, including link brackets, a push-puller tool group, driver group, and hydraulic cylinder assembly. Precautions are given for using hydraulic cylinders and puller studs during disassembly. The multi-step process includes pressing, lifting, and removing components from the planetary carrier, sun gear, and hub.
1) The document provides instructions to disassemble and assemble the final drive of a D9R track-type tractor.
2) It describes using various tools to remove over 30 components of the final drive including gears, shafts, seals, and hubs.
3) Precautions are included when using hydraulic cylinders and heated components to disassemble pieces.
1) The document provides instructions for removing and installing the final drive planetary carrier in a D9R track-type tractor.
2) It describes using various tools to remove the carrier, hub components, seals, and gears. It also explains how to reinstall these parts in reverse order.
3) Fourteen steps are outlined for removal and thirteen steps for installation, ensuring proper alignment of parts and torquing of bolts.
The document provides instructions for disassembling and assembling the steering clutch and brake of a D7R track-type tractor. It describes 20 steps to disassemble the components and 19 steps to reassemble them. These include removing plates, seals, springs, and other parts, and replacing them in the reverse order. Tools required include link brackets and a driver group. Proper spring loading and seal installation are emphasized.
This document provides instructions for assembling and installing the final drive on a D7R track-type tractor. It describes 31 steps for assembly, including installing seals, bearings, gears, shafts and covers. For installation, it outlines 10 steps such as positioning the final drive, installing bolts, filling it with oil and reconnecting the track. The document contains diagrams to illustrate each step in the process.
Caterpillar Cat D7R II WATER FORDING TRACTOR (Prefix DJT) Service Repair Manu...ze3xiandiao
This document provides instructions for disassembling and assembling the steering planetary and brake of a D7R Series II Water Fording Tractor. It describes removing 24 components including the planetary group, brake, ring gear, friction discs, piston, and springs. Reassembly involves installing these components in reverse order, noting proper orientation and torque specifications. Tools required include link brackets, a driver group, forcing bolts, and sealant.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix AGN) Service Repair Manual ...ze3xiandiao
The document provides instructions for removing a final drive, steering planetary, and brake assembly from a D7R II track-type tractor. It describes using lifting brackets, shackles, bolts and nuts to attach a hoist to the assembly and remove it from the tractor. The assembly weighs approximately 800 kg (1750 lb) and precautions are listed to provide means to stop the machine without the brake installed. Fluids must be contained while working on components to collect any fluids that may drain out.
The document provides instructions for disassembling and assembling the final drives of a D7H track-type tractor. Key steps include removing the final drives from the tractor frame using specialized tools, then disassembling the internal components like planet carriers, gears, shafts, and seals. Reassembly involves heating bearings, installing seals and bearings using presses and tools, and reattaching the final drives to the frame. Precautions are noted to prevent damage to seals during axle removal and installation.
This document provides instructions for servicing the final drives on a D7H track-type tractor. It describes how to remove and disassemble the final drives, including removing the planet carriers, gears, shafts and other components. It then describes how to assemble the final drives, including installing bearings, seals, rings and other parts back into the hubs and carriers. The goal is to provide maintenance technicians with step-by-step directions for servicing these critical components.
1) The document provides instructions for removing and installing pistons, connecting rods, connecting rod bearings, and crankshaft main bearings for a Caterpillar 3306 engine.
2) The procedure involves using tools to compress piston rings, installing pistons and connecting rods onto the crankshaft, checking clearances of connecting rod bearings, and removing/installing main bearing caps.
3) Technicians are advised to keep all parts clean and lubricated with engine oil to prevent damage and wear.
The document provides instructions for removing final drive cases, gears, idler pinions and bearings from a D7G track-type tractor. The steps include:
1) Removing bolts holding the final drive case in position.
2) Installing guide bolts and forcing screws to separate the final drive case from the steering clutch case.
3) Using wire to hold the idler pinion in place so the planet carrier does not fall when the final drive case is removed.
The document provides step-by-step instructions for removing and installing sprocket assemblies on a final drive case. It involves draining the oil, removing the sprocket and various components using specialized tools, cleaning seals and surfaces, and installing the new sprocket along with bearings, seals, and other parts in reverse order. Precise measurements and torque specifications are listed to ensure proper installation.
The document provides instructions for removing and installing sprocket assemblies on a direct drive final drive. The key steps include:
1. Draining the oil and removing the sprocket, holder assembly, seals, bearings and other components.
2. Cleaning surfaces and installing new seals before pressing the sprocket onto the hub using a hydraulic press.
3. Reassembling the holder assembly by installing bearings, seals, and adjusting nut then attaching it to the sprocket shaft.
This document provides instructions for removing and installing the engine in a D7F track-type tractor model 94N. The removal process involves draining fluids, disconnecting wiring harnesses and fluid lines, and removing mounting hardware. The engine can then be lifted out of the tractor body. Installation is the reverse of removal, reconnecting all fluid lines, wiring, and securing the engine with mounting hardware. Proper lubrication and adjustment of components is also specified.
This document provides instructions for removing and installing various components of a D7F track-type tractor engine. The components include the timing gear cover, camshaft, flywheel, crankshaft rear seal, power take-off drive gears and bearings, and removing the entire engine. Detailed steps are provided for each component, including preparatory steps, individual installation and removal steps, and concluding steps.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR YEP
Configuration: 336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07175112
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 24 09:47:33 UTC+0800 2020
10/10
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEB...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR YEP
Configuration: 336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07191698
Final Drive and Travel Motor - Remove and Install
SMCS - 4050; 4351
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Refer to Operation and Maintenance Manual, "Final Drive Oil - Change" for the correct
draining and filling procedures.
1/5
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 1 g02108761
2. Remove bolts (1) and cover (2).
3. Separate the track.
Illustration 2 g02108762
4. Disconnect hose assemblies (3) ( 4), and (6). Remove fitting (5).
2/5
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g02108781
5. Attach Tooling (A) and a suitable lifting device to final drive and travel motor (7). The
weight of final drive and travel motor (7) is approximately 860 kg (1896 lb). Put a slight
lifting tension on final drive and travel motor (7).
Illustration 4 g02108790
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
6. Remove bolts (8).
Illustration 5 g02108791
7. Use two bolts (8) to remove final drive and travel motor (7).
8. Carefully remove final drive and travel motor (7).
9. Remove bolts (8) from the frame.
3/5
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 6 g02108793
10. Remove bolts (9), counterbalance valve (10), and the O-ring seals.
Illustration 7 g02108794
11. Attach Tooling (B) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 84 kg (185 lb).
12. Remove four bolts (12) and travel motor (11) from final drive (13).
4/5
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 8 g02108914
13. Remove coupling (14).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
C - Loctite C5A Copper Anti-Seize -
1. Before assembly remove all compounds, oil, and dust.
2. Install final drive and travel motor (7) in the reverse order of removal.
a. Tighten bolts (9) to a torque of 80 ± 8 N·m (60 ± 6 lb ft).
b. Apply Tooling (C) to the threads of bolt (8).
c. Tighten bolts (8) to a torque of 250 ± 25 N·m (184 ± 18 lb ft) and turn an additional
angle of 45 ± 5 degrees. Refer to Service Magazine, M0083843, "An Improved Bolt
Tightening Procedure for the Critical Joints Is Now Used on All Excavators" for more
detail information.
d. Tighten hose assembly (3) to a torque of 160 ± 16 N·m (120 ± 12 lb ft).
e. Tighten bolts (1) to a torque of 130 ± 10 N·m (95 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 24 09:48:29 UTC+0800 2020
5/5
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR YEP
Configuration: 336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i03885522
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
Start By:
a. Remove the final drive and the travel motor.
Illustration 1 g02131413
1/8
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 1. Attach Tooling (A) and a suitable lifting device to cover (2). The weight of cover (2) is
approximately 20 kg (45 lb). Remove bolts (1) and cover (2).
Illustration 2 g02131414
2. Remove plate (3) from cover (2).
Illustration 3 g02131415
3. Remove sun gear (4), spacer (5), and planetary gear assembly (6).
2/8
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 4 g02131875
4. Remove retaining ring (7), washer (8), planetary gear (9), roller bearing (11), and washer
(12) from carrier assembly (13).
5. Remove retaining ring (10) and sun gear (14) from carrier assembly (13).
Illustration 5 g02131876
6. Remove spacer (16).
7. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (15). The weight
of planetary gear assembly (15) is approximately 32 kg (70 lb). Remove planetary gear
assembly (15).
3/8
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 6 g02131877
8. Drive spring pin (17) into planetary shaft (18) with a suitable hammer and a suitable punch.
9. Remove planetary shaft (18), washer (20), roller bearing (20), planetary gear (23), and
washer (24) from the carrier assembly (21).
10. Remove spring pin (17) from planetary shaft (18) with a suitable hammer and a suitable
punch.
11. Remove retaining ring (19) and sun gear (25) from carrier assembly (21).
Illustration 7 g02131878
12. Remove spacer (26).
13. Attach Tooling (A) and a suitable lifting device to ring gear (27). The weight of ring gear
(27) is approximately 70 kg (155 lb). Remove bolts (28) and ring gear (27).
4/8
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 8 g02131879
14. Remove O-ring seal (29).
15. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (30). The weight
of planetary gear assembly (30) is approximately 57 kg (125 lb). Remove planetary gear
assembly (30).
Illustration 9 g02131881
16. Drive spring pin (31) into planetary shaft (32) with a suitable hammer and a suitable punch.
17. Remove planetary shaft (32), washer (33), roller bearings (35), planetary gear (36), and
washer (36) from the carrier assembly (34).
18. Remove spring pin (31) from planetary shaft (32) with a suitable hammer and a suitable
punch.
5/8
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 10 g02131882
Illustration 11 g02131885
19. Remove bolts (38). Use Tooling (B) in order to remove gear (39).
Illustration 12 g02131886
20. Remove shims (40).
6/8
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 13 g02131887
21. Attach Tooling (C) and a suitable lifting device to sprocket housing (41). The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Remove sprocket housing (41) and
roller bearing (42).
Illustration 14 g02131888
22. Remove bearing races (43) and Duo-Cone seal (44) from sprocket housing (41).
7/8
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 15 g02132155
23. Remove Duo-Cone seal (45) and roller bearing (47) from motor housing (48). The weight of
motor housing (48) is approximately 91 kg (200 lb).
24. If necessary, remove dowels (46) from motor housing (48).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 24 09:49:25 UTC+0800 2020
8/8
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR YEP
Configuration: 336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i05103849
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
D 5P-3931 Anti-Seize Compound -
E 1U-9895 Crossblock 1
F 6V-2012 Depth Micrometer 1
G 6V-7059 Micrometer () 1
H - Loctite 242 -
J 6V-2055 Grease -
K - Loctite 17430 -
L 8T-9206 Seal Installer 1
1/12
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
27. Illustration 1 g02132155
1. Apply Tooling (D) to the surface of dowels (46) . Install dowels (46) .
2. Raise the temperature of roller bearing (47) . Install the roller bearing (47) on motor housing
(48) .
3. Install Duo-Cone seal (45) .
Illustration 2 g02131888
4. Lower the temperature of bearing races (43) . Install bearing races (43) in sprocket housing
(41) .
5. Install Duo-Cone seal (44) .
2/12
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Illustration 3 g02131887
6. Attach Tooling (C) and a suitable lifting device to sprocket housing (41) . The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Install sprocket housing (41) .
7. Raise the temperature of roller bearing (42) . Install the roller bearing (42) .
Illustration 4 g02135728
3/12
336E L Excavators YEP00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...