This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using a thread locking compound. The overall summary is that this provides detailed removal and installation instructions for an excavator travel motor, outlining over two dozen individual steps.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjskekmdm
This document provides instructions for removing and installing the final drive and travel motor on a 336E L excavator. It outlines 28 steps for disassembly, including draining oil, removing covers, hoses, bolts and the final drive/travel motor assembly. It also details 13 steps for installation, which is the removal process in reverse order. Proper cleaning, lubrication and torque specifications are noted to correctly reassemble the components.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjskekdm
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 28 steps to disassemble the travel motor, including removing seals, springs, pistons, and other components. It then describes 13 steps for installation, which involves reassembling these parts in reverse order and noting proper torque specifications for bolts. The final step states to install the travel motor by following the removal procedures in reverse order.
Caterpillar cat 336 e l excavator (prefix gtj) service repair manual (gtj0000...fjskekmdm
The document provides instructions for assembling a travel motor used in excavators. It describes 27 steps to assemble components like seals, springs, pistons, and plates into the motor housing. Key steps include lubricating mating surfaces, installing retaining rings, and tightening bolts to specified torques. The assembly ends by installing the motor housing cover and bolts, and noting the motor is then ready for installation in the excavator.
Caterpillar cat 336 e lh excavator (prefix gny) service repair manual (gny000...fjskekdmjekm
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper sequence. It also describes attaching the travel motor to the excavator and tightening bolts to the specified torques. The removal and installation procedures for a final drive and travel motor are also outlined in 13 steps, including draining oil first and marking components for reinstallation.
Caterpillar cat 336 e lh excavator (prefix ssl) service repair manual (ssl000...fjskekdmjekm
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive unit. The disassembly process involves removing components like the cover, sun gear, planetary gear assembly, and retaining rings. Precautions are provided regarding weight of components. The assembly process specifies applying thread locking compound and tightening bolts to the specified torques.
Caterpillar cat 336 e l excavator (prefix ked) service repair manual (ked0000...fjskekmdm
The document provides instructions for assembling a travel motor. It involves 27 steps including installing seals, springs, pistons, bearings and other components in the proper order and orientation. The travel motor is then installed by attaching it to the final drive assembly using bolts and following markings to ensure correct alignment. Disassembly is reversed, removing hoses, bolts, seals and other parts, taking care when handling components due to weight and pressures.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjsekqazxkdmmem
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjskekmdm
This document provides instructions for removing and installing the final drive and travel motor on a 336E L excavator. It outlines 28 steps for disassembly, including draining oil, removing covers, hoses, bolts and the final drive/travel motor assembly. It also details 13 steps for installation, which is the removal process in reverse order. Proper cleaning, lubrication and torque specifications are noted to correctly reassemble the components.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjskekdm
This document provides instructions for removing and installing a travel motor on an excavator. It outlines 28 steps to disassemble the travel motor, including removing seals, springs, pistons, and other components. It then describes 13 steps for installation, which involves reassembling these parts in reverse order and noting proper torque specifications for bolts. The final step states to install the travel motor by following the removal procedures in reverse order.
Caterpillar cat 336 e l excavator (prefix gtj) service repair manual (gtj0000...fjskekmdm
The document provides instructions for assembling a travel motor used in excavators. It describes 27 steps to assemble components like seals, springs, pistons, and plates into the motor housing. Key steps include lubricating mating surfaces, installing retaining rings, and tightening bolts to specified torques. The assembly ends by installing the motor housing cover and bolts, and noting the motor is then ready for installation in the excavator.
Caterpillar cat 336 e lh excavator (prefix gny) service repair manual (gny000...fjskekdmjekm
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper sequence. It also describes attaching the travel motor to the excavator and tightening bolts to the specified torques. The removal and installation procedures for a final drive and travel motor are also outlined in 13 steps, including draining oil first and marking components for reinstallation.
Caterpillar cat 336 e lh excavator (prefix ssl) service repair manual (ssl000...fjskekdmjekm
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive unit. The disassembly process involves removing components like the cover, sun gear, planetary gear assembly, and retaining rings. Precautions are provided regarding weight of components. The assembly process specifies applying thread locking compound and tightening bolts to the specified torques.
Caterpillar cat 336 e l excavator (prefix ked) service repair manual (ked0000...fjskekmdm
The document provides instructions for assembling a travel motor. It involves 27 steps including installing seals, springs, pistons, bearings and other components in the proper order and orientation. The travel motor is then installed by attaching it to the final drive assembly using bolts and following markings to ensure correct alignment. Disassembly is reversed, removing hoses, bolts, seals and other parts, taking care when handling components due to weight and pressures.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjsekqazxkdmmem
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing the final drive and travel motor assembly.
2) Attaching lifting equipment and removing bolts to separate the travel motor from the final drive and remove the assemblies.
3) Reversing the process to install the travel motor onto the final drive and reinstall the assembled unit along with hydraulic connections.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjkkekmdm
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...hfhjskedme
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic lines before removal.
2) Using lifting equipment to remove the final drive and travel motor assembly, travel motor, and coupling.
3) Cleaning and lubricating parts before reverse installation, and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...jdkskmmdmd1
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing the final drive and travel motor assembly.
2) Attaching lifting equipment and removing bolts to separate the travel motor from the final drive and remove the assemblies.
3) Reversing the process to install the travel motor onto the final drive and reinstall the assembled unit along with hydraulic connections.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, carriers, bearings, and washers. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, sun gear, planetary gears, retain rings, washers and bearings.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...yqen95561858
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f7usuejkdkddm3
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...ufs89eodkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...jdkskmmdmd1
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjfyjsekdmme
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive by removing coupling and bolts.
3) Dismantling the final drive further by removing its cover, gears, bearings, and other internal components.
The assembly instructions are provided in reverse order. Precise torques are specified for reinstalling each component.
Massey ferguson mf 7242 combine parts catalogue manualhfhjskedme
This document provides a parts list for a Massey Ferguson MF 7242 combine. It includes 128 items with part numbers, quantities, descriptions, and comments. The parts listed are for the knives and fingers, table auger right hand, and table auger left hand components of the combine.
Massey ferguson mf 3455 vsf tractors parts catalogue manualhfhjskedme
This document contains parts lists and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including:
- The cylinder block, with lists of parts, part numbers, and quantities for each model.
- The crankshaft, pistons, and connecting rods, again with detailed parts lists and diagrams for each model.
- The cylinder head, with exploded diagrams and parts listings specific to each model.
- A page showing the heater/starter switch components for the MF 3425 model.
The document provides maintenance technicians with the information needed to service and repair engine parts for these Massey Ferguson tractor models. Parts are identified
Massey ferguson mf 3445 vsf tractors parts catalogue manualhfhjskedme
This document contains parts lists and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including:
- The cylinder block, with lists of parts, part numbers, and quantities for each model.
- The crankshaft, pistons, and connecting rods, again with detailed parts lists and diagrams for each model.
- The cylinder head, with exploded diagrams and parts listings specific to each model.
- A page showing the heater/starter switch components for the MF 3425 model.
The document provides maintenance technicians with the information needed to service and repair engine parts for these Massey Ferguson tractor models. Parts are identified
Massey ferguson mf 3435 vsf tractors parts catalogue manualhfhjskedme
This document contains parts lists and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including:
- The cylinder block, with lists of parts, part numbers, and quantities for each model.
- The crankshaft, pistons, and connecting rods, again with detailed parts lists and diagrams for each model.
- The cylinder head, with exploded diagrams and parts listings specific to each model.
- A page showing the heater/starter switch components for the MF 3425 model.
The document provides maintenance technicians with the information needed to service and repair engine parts for these Massey Ferguson tractor models. Parts are identified
More Related Content
Similar to Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh00001 and up)
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing the final drive and travel motor assembly.
2) Attaching lifting equipment and removing bolts to separate the travel motor from the final drive and remove the assemblies.
3) Reversing the process to install the travel motor onto the final drive and reinstall the assembled unit along with hydraulic connections.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjkkekmdm
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...hfhjskedme
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic lines before removal.
2) Using lifting equipment to remove the final drive and travel motor assembly, travel motor, and coupling.
3) Cleaning and lubricating parts before reverse installation, and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...jdkskmmdmd1
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing the final drive and travel motor assembly.
2) Attaching lifting equipment and removing bolts to separate the travel motor from the final drive and remove the assemblies.
3) Reversing the process to install the travel motor onto the final drive and reinstall the assembled unit along with hydraulic connections.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, carriers, bearings, and washers. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, sun gear, planetary gears, retain rings, washers and bearings.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...yqen95561858
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f7usuejkdkddm3
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...ufs89eodkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...jdkskmmdmd1
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjfyjsekdmme
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive by removing coupling and bolts.
3) Dismantling the final drive further by removing its cover, gears, bearings, and other internal components.
The assembly instructions are provided in reverse order. Precise torques are specified for reinstalling each component.
Similar to Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh00001 and up) (18)
Massey ferguson mf 7242 combine parts catalogue manualhfhjskedme
This document provides a parts list for a Massey Ferguson MF 7242 combine. It includes 128 items with part numbers, quantities, descriptions, and comments. The parts listed are for the knives and fingers, table auger right hand, and table auger left hand components of the combine.
Massey ferguson mf 3455 vsf tractors parts catalogue manualhfhjskedme
This document contains parts lists and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including:
- The cylinder block, with lists of parts, part numbers, and quantities for each model.
- The crankshaft, pistons, and connecting rods, again with detailed parts lists and diagrams for each model.
- The cylinder head, with exploded diagrams and parts listings specific to each model.
- A page showing the heater/starter switch components for the MF 3425 model.
The document provides maintenance technicians with the information needed to service and repair engine parts for these Massey Ferguson tractor models. Parts are identified
Massey ferguson mf 3445 vsf tractors parts catalogue manualhfhjskedme
This document contains parts lists and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including:
- The cylinder block, with lists of parts, part numbers, and quantities for each model.
- The crankshaft, pistons, and connecting rods, again with detailed parts lists and diagrams for each model.
- The cylinder head, with exploded diagrams and parts listings specific to each model.
- A page showing the heater/starter switch components for the MF 3425 model.
The document provides maintenance technicians with the information needed to service and repair engine parts for these Massey Ferguson tractor models. Parts are identified
Massey ferguson mf 3435 vsf tractors parts catalogue manualhfhjskedme
This document contains parts lists and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including:
- The cylinder block, with lists of parts, part numbers, and quantities for each model.
- The crankshaft, pistons, and connecting rods, again with detailed parts lists and diagrams for each model.
- The cylinder head, with exploded diagrams and parts listings specific to each model.
- A page showing the heater/starter switch components for the MF 3425 model.
The document provides maintenance technicians with the information needed to service and repair engine parts for these Massey Ferguson tractor models. Parts are identified
Massey ferguson mf 3425 vsf tractors parts catalogue manualhfhjskedme
This document contains parts lists and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including:
- The cylinder block, with lists of parts, part numbers, and quantities for each model.
- The crankshaft, pistons, and connecting rods, again with detailed parts lists and diagrams for each model.
- The cylinder head, with exploded diagrams and parts listings specific to each model.
- A page showing the heater/starter switch components for the MF 3425 model.
The document provides maintenance technicians with the information needed to service and repair engine parts for these Massey Ferguson tractor models. Parts are identified
Massey ferguson mf 3355 vsf tractors parts catalogue manualhfhjskedme
This document provides parts information for Massey Ferguson tractors models MF 3315, 3325, 3330, 3340, 3350, and 3355. It includes detailed parts lists and diagrams for the engine, alternator, starter, cylinder block, crankshaft, pistons, and connecting rods. The parts lists include the part numbers, quantities, descriptions, and any relevant comments for each component.
Massey ferguson mf 3350 vsf tractors parts catalogue manualhfhjskedme
This document provides parts information for Massey Ferguson tractors models MF 3315, 3325, 3330, 3340, 3350, and 3355. It includes detailed parts lists and diagrams for the engine, alternator, starter, cylinder block, crankshaft, pistons, and connecting rods. The parts lists include the part numbers, quantities, descriptions, and any relevant comments for each component.
Massey ferguson mf 3340 vsf tractors parts catalogue manualhfhjskedme
This document provides parts information for Massey Ferguson tractors models MF 3315, 3325, 3330, 3340, 3350, and 3355. It includes detailed parts lists and diagrams for the engine, alternator, starter, cylinder block, crankshaft, pistons, and connecting rods. The parts lists include the part numbers, quantities, descriptions, and any relevant comments for each component.
Massey ferguson mf 3330 vsf tractors parts catalogue manualhfhjskedme
This document provides parts information for Massey Ferguson tractors models MF 3315, 3325, 3330, 3340, 3350, and 3355. It includes detailed parts lists and diagrams for the engine, alternator, starter, cylinder block, crankshaft, pistons, and connecting rods of the MF 3315 and 3325 tractors. The parts lists include the part numbers, quantities, descriptions, and any relevant comments for each component.
Massey ferguson mf 3325 vsf tractors parts catalogue manualhfhjskedme
This document provides parts information for Massey Ferguson tractors models MF 3315, 3325, 3330, 3340, 3350, and 3355. It includes detailed parts lists and diagrams for the engine, alternator, starter, cylinder block, crankshaft, pistons, and connecting rods of the MF 3315 and 3325 tractors. The parts lists include the part numbers, quantities, descriptions, and any comments or replacement part numbers. The diagrams visually show the layout and components.
Massey ferguson mf 3315 vsf tractors parts catalogue manualhfhjskedme
This document provides parts information for Massey Ferguson tractors models MF 3315, 3325, 3330, 3340, 3350, and 3355. It includes detailed parts lists and diagrams for the engine, alternator, starter, cylinder block, crankshaft, pistons, and connecting rods. The parts lists include the part numbers, quantities, descriptions, and any relevant comments for each component.
Massey ferguson mf 1345 compact tractors parts catalogue manualhfhjskedme
This document provides parts lists and descriptions for components of Massey Ferguson MF 1325/1335/1345 compact tractors, including the cylinder block, crankshaft, pistons, connecting rods, and cylinder head. It lists each part number, quantity, description, and any relevant comments or footnotes for each item. The parts lists are broken down by component and model to provide the specific parts for the MF 1325, MF 1335, and MF 1345 models.
Massey ferguson mf 1335 compact tractors parts catalogue manualhfhjskedme
This document provides parts lists and descriptions for components of Massey Ferguson MF 1325/1335/1345 compact tractors, including the cylinder block, crankshaft, pistons, connecting rods, and cylinder head. It lists each part number, quantity, description, and any relevant comments or footnotes for each item. The parts lists are broken down by component and model to provide the specific parts for the MF 1325, 1335, and 1345 models.
Massey ferguson mf 1325 compact tractors parts catalogue manualhfhjskedme
This document contains parts lists and specifications for cylinder blocks, crankshafts, pistons, connecting rods, and cylinder heads for Massey Ferguson MF 1325, 1335, and 1345 compact tractors. It includes detailed lists of each part required with corresponding part numbers and quantities. Specifications vary slightly between the three tractor models.
Massey ferguson mf 1260 compact tractor ( e60101 - hst non hst) parts catal...hfhjskedme
This document provides parts information for the Massey Ferguson MF 1260 compact tractor, including multiple assemblies and components. It lists 61 individual items that make up the timing gear housing assembly, providing part numbers, quantities, descriptions, and other relevant details for each part. Special notes are included to indicate part number changes associated with specific serial or engine numbers. The document also includes parts listings for other assemblies like the cylinder head, block, and turbocharger.
Komatsu pc1800 6 hydraulic excavator service repair manual (sn 11002 and up)hfhjskedme
This shop manual provides instructions for repairing and maintaining the Komatsu PC1800-6 excavator. It is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, and other topics. The manual notes that the PC1800-6 is equipped with a SAA6D140E-3 engine, and the engine shop manual should be referenced for engine-related repairs. Technicians are advised to follow safety precautions, prepare properly for each repair job, and consult the manual for the correct procedures and standards.
Komatsu pc1800 6 hydraulic excavator service repair manual (sn 10011 and up)hfhjskedme
This shop manual provides instructions for repairing and maintaining the Komatsu PC1800-6 excavator. It is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, and other topics. The manual notes that the PC1800-6 is equipped with a SAA6D140E-3 engine, and the engine shop manual should be referenced for engine-related repairs. Technicians are advised to follow safety precautions, prepare properly for each repair job, and consult the manual for the correct procedures and standards.
Komatsu pc1800 6 galeo hydraulic excavator operation & maintenance manual...hfhjskedme
1) This manual provides safety and operational instructions for Komatsu PC1800-6 Hydraulic Excavators with serial numbers 11035 and up.
2) The excavator is designed for digging and loading work. Safety labels and precautions in the manual must always be followed.
3) In addition to operational details, the manual covers maintenance schedules, troubleshooting, specifications, and attachments like loading shovels that can be used with the excavator. Users should contact their distributor for any revision updates.
Komatsu pc250 lc 6 excavator service repair manual sn a80001 and uphfhjskedme
This document is a shop manual for Komatsu excavators providing technical information for maintenance and repair work. It includes sections on general safety procedures, the structure and function of components, testing and adjustment procedures, disassembly and assembly instructions, and maintenance standards for parts. The manual is intended to help technicians safely and effectively service the excavators by providing accurate technical information.
Komatsu pc220 ll 6 excavator service repair manual sna85001 and uphfhjskedme
This document is a shop manual addendum for the Komatsu PC200LL-6 and PC220LL-6 logging excavators. It provides information for servicing and repairing these excavator models, with sections covering general information, structure and function, testing and troubleshooting, disassembly and assembly, and maintenance standards. Komatsu policies on improving products and revising publications are also mentioned. The manual instructs technicians to use information from standard shop manuals for any topics not covered specifically for the PC200LL and PC220LL models.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR FJH
Configuration: 336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07175112
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 17 10:42:46 UTC+0800 2020
10/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEB...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR FJH
Configuration: 336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07191698
Final Drive and Travel Motor - Remove and Install
SMCS - 4050; 4351
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Refer to Operation and Maintenance Manual, "Final Drive Oil - Change" for the correct
draining and filling procedures.
1/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 1 g02108761
2. Remove bolts (1) and cover (2).
3. Separate the track.
Illustration 2 g02108762
4. Disconnect hose assemblies (3) ( 4), and (6). Remove fitting (5).
2/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g02108781
5. Attach Tooling (A) and a suitable lifting device to final drive and travel motor (7). The
weight of final drive and travel motor (7) is approximately 860 kg (1896 lb). Put a slight
lifting tension on final drive and travel motor (7).
Illustration 4 g02108790
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
6. Remove bolts (8).
Illustration 5 g02108791
7. Use two bolts (8) to remove final drive and travel motor (7).
8. Carefully remove final drive and travel motor (7).
9. Remove bolts (8) from the frame.
3/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 6 g02108793
10. Remove bolts (9), counterbalance valve (10), and the O-ring seals.
Illustration 7 g02108794
11. Attach Tooling (B) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 84 kg (185 lb).
12. Remove four bolts (12) and travel motor (11) from final drive (13).
4/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 8 g02108914
13. Remove coupling (14).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
C - Loctite C5A Copper Anti-Seize -
1. Before assembly remove all compounds, oil, and dust.
2. Install final drive and travel motor (7) in the reverse order of removal.
a. Tighten bolts (9) to a torque of 80 ± 8 N·m (60 ± 6 lb ft).
b. Apply Tooling (C) to the threads of bolt (8).
c. Tighten bolts (8) to a torque of 250 ± 25 N·m (184 ± 18 lb ft) and turn an additional
angle of 45 ± 5 degrees. Refer to Service Magazine, M0083843, "An Improved Bolt
Tightening Procedure for the Critical Joints Is Now Used on All Excavators" for more
detail information.
d. Tighten hose assembly (3) to a torque of 160 ± 16 N·m (120 ± 12 lb ft).
e. Tighten bolts (1) to a torque of 130 ± 10 N·m (95 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 17 10:43:42 UTC+0800 2020
5/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR FJH
Configuration: 336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i03885522
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
Start By:
a. Remove the final drive and the travel motor.
Illustration 1 g02131413
1/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 1. Attach Tooling (A) and a suitable lifting device to cover (2). The weight of cover (2) is
approximately 20 kg (45 lb). Remove bolts (1) and cover (2).
Illustration 2 g02131414
2. Remove plate (3) from cover (2).
Illustration 3 g02131415
3. Remove sun gear (4), spacer (5), and planetary gear assembly (6).
2/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 4 g02131875
4. Remove retaining ring (7), washer (8), planetary gear (9), roller bearing (11), and washer
(12) from carrier assembly (13).
5. Remove retaining ring (10) and sun gear (14) from carrier assembly (13).
Illustration 5 g02131876
6. Remove spacer (16).
7. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (15). The weight
of planetary gear assembly (15) is approximately 32 kg (70 lb). Remove planetary gear
assembly (15).
3/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 6 g02131877
8. Drive spring pin (17) into planetary shaft (18) with a suitable hammer and a suitable punch.
9. Remove planetary shaft (18), washer (20), roller bearing (20), planetary gear (23), and
washer (24) from the carrier assembly (21).
10. Remove spring pin (17) from planetary shaft (18) with a suitable hammer and a suitable
punch.
11. Remove retaining ring (19) and sun gear (25) from carrier assembly (21).
Illustration 7 g02131878
12. Remove spacer (26).
13. Attach Tooling (A) and a suitable lifting device to ring gear (27). The weight of ring gear
(27) is approximately 70 kg (155 lb). Remove bolts (28) and ring gear (27).
4/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 8 g02131879
14. Remove O-ring seal (29).
15. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (30). The weight
of planetary gear assembly (30) is approximately 57 kg (125 lb). Remove planetary gear
assembly (30).
Illustration 9 g02131881
16. Drive spring pin (31) into planetary shaft (32) with a suitable hammer and a suitable punch.
17. Remove planetary shaft (32), washer (33), roller bearings (35), planetary gear (36), and
washer (36) from the carrier assembly (34).
18. Remove spring pin (31) from planetary shaft (32) with a suitable hammer and a suitable
punch.
5/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 10 g02131882
Illustration 11 g02131885
19. Remove bolts (38). Use Tooling (B) in order to remove gear (39).
Illustration 12 g02131886
20. Remove shims (40).
6/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 13 g02131887
21. Attach Tooling (C) and a suitable lifting device to sprocket housing (41). The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Remove sprocket housing (41) and
roller bearing (42).
Illustration 14 g02131888
22. Remove bearing races (43) and Duo-Cone seal (44) from sprocket housing (41).
7/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 15 g02132155
23. Remove Duo-Cone seal (45) and roller bearing (47) from motor housing (48). The weight of
motor housing (48) is approximately 91 kg (200 lb).
24. If necessary, remove dowels (46) from motor housing (48).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 17 10:44:38 UTC+0800 2020
8/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR FJH
Configuration: 336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i05103849
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
D 5P-3931 Anti-Seize Compound -
E 1U-9895 Crossblock 1
F 6V-2012 Depth Micrometer 1
G 6V-7059 Micrometer () 1
H - Loctite 242 -
J 6V-2055 Grease -
K - Loctite 17430 -
L 8T-9206 Seal Installer 1
1/12
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Illustration 1 g02132155
1. Apply Tooling (D) to the surface of dowels (46) . Install dowels (46) .
2. Raise the temperature of roller bearing (47) . Install the roller bearing (47) on motor housing
(48) .
3. Install Duo-Cone seal (45) .
Illustration 2 g02131888
4. Lower the temperature of bearing races (43) . Install bearing races (43) in sprocket housing
(41) .
5. Install Duo-Cone seal (44) .
2/12
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Illustration 3 g02131887
6. Attach Tooling (C) and a suitable lifting device to sprocket housing (41) . The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Install sprocket housing (41) .
7. Raise the temperature of roller bearing (42) . Install the roller bearing (42) .
Illustration 4 g02135728
3/12
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 5 g02134214
8. Use Tooling (E) and a suitable press in order to apply force to roller bearing (42) . Apply a
force of 4000 kg (8818 lb) to the top of Tooling (E) . Rotate sprocket housing (41) in order
to seat the roller bearings.
9. Reduce the force on top of Tooling (E) to 3000 ± 300 kg (6614 ± 661 lb). Use Tooling (F)
in order to measure Dimension (X) . Record Dimension (X) .
4/12
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...