The document provides instructions for disassembling and assembling a travel motor and final drive. It details 27 steps to assemble the travel motor, including installing seals, springs, pistons, and other components in the proper order. It also outlines 13 steps to remove the final drive and travel motor as a unit from the excavator, and 10 steps to disassemble the final drive, removing components like gears, spacers, and covers. Personal protective equipment is recommended due to risk of injury from pressurized hydraulic fluid.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjsekqazxkdmmem
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing the final drive and travel motor assembly.
2) Attaching lifting equipment and removing bolts to separate the travel motor from the final drive and remove the assemblies.
3) Reversing the process to install the travel motor onto the final drive and reinstall the assembled unit along with hydraulic connections.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjkkekmdm
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...hfhjskedme
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic lines before removal.
2) Using lifting equipment to remove the final drive and travel motor assembly, travel motor, and coupling.
3) Cleaning and lubricating parts before reverse installation, and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...jdkskmmdmd1
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing the final drive and travel motor assembly.
2) Attaching lifting equipment and removing bolts to separate the travel motor from the final drive and remove the assemblies.
3) Reversing the process to install the travel motor onto the final drive and reinstall the assembled unit along with hydraulic connections.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjsekqazxkdmmem
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing the final drive and travel motor assembly.
2) Attaching lifting equipment and removing bolts to separate the travel motor from the final drive and remove the assemblies.
3) Reversing the process to install the travel motor onto the final drive and reinstall the assembled unit along with hydraulic connections.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjkkekmdm
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...hfhjskedme
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic lines before removal.
2) Using lifting equipment to remove the final drive and travel motor assembly, travel motor, and coupling.
3) Cleaning and lubricating parts before reverse installation, and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...jdkskmmdmd1
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing the final drive and travel motor assembly.
2) Attaching lifting equipment and removing bolts to separate the travel motor from the final drive and remove the assemblies.
3) Reversing the process to install the travel motor onto the final drive and reinstall the assembled unit along with hydraulic connections.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, carriers, bearings, and washers. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, sun gear, planetary gears, retain rings, washers and bearings.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...yqen95561858
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f7usuejkdkddm3
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...ufs89eodkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...jdkskmmdmd1
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjfyjsekdmme
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive by removing coupling and bolts.
3) Dismantling the final drive further by removing its cover, gears, bearings, and other internal components.
The assembly instructions are provided in reverse order. Precise torques are specified for reinstalling each component.
This document provides instructions for disassembling and assembling the final drive of an excavator. It lists the required tools and parts. The disassembly process involves removing 37 individual components in a specific order, including gears, shafts, seals, washers, and housings. The assembly section provides instructions for installing these components in reverse order and notes on cleaning, lubricating, and setting proper bearing preload using shims.
Caterpillar Cat 325D L Excavator (Prefix GBR) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions to disassemble a final drive over 33 steps. Key steps include removing the cover, gears, carrier assemblies, planetary gears, and seals. Cleanliness is important to prevent dirt entering during disassembly. Various tools are required including a transmission repair stand, link brackets, retaining ring pliers, and a slide hammer puller. The total weight of disassembled parts is provided.
Caterpillar Cat 323D L Excavator (Prefix JLG) Service Repair Manual Instant D...fujkskemdmdm4r
1. The document provides instructions for removing and installing inlet and exhaust valve seat inserts for a C6.4 engine. It describes the required tools and steps to remove the old inserts and install new ones.
2. Procedures are provided for removing, disassembling, and assembling the engine oil cooler. Parts are to be kept clean from contaminants to prevent damage.
3. Instructions are given for removing and installing the engine oil relief valve, including replacing the gasket. Cleanliness is important to prevent premature wear.
1) The document provides assembly instructions for a final drive on an excavator.
2) It involves over 40 steps to assemble bearings, seals, gears, carriers, housing and cover components.
3) Special tools and procedures are required to set bearing preloads, install seals, and test for leaks. Proper torque values and sealants are specified.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, which powers a 345D L excavator. The procedures include removing the electric starting motor, flywheel, rear crankshaft seal, and other rear gear components. Detailed illustrations show the components and tools used. Precautions are provided to properly support heavy components and contain fluids.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions emphasize cleaning parts and ensuring they are reinstalled in their original locations to avoid damage and contamination.
Caterpillar Cat 345D L Excavator (Prefix PBT) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the swing drive of a 345D L excavator. It lists the required tools and gives step-by-step procedures to remove components such as the carrier assembly, ring gear, and bearings. Cleanliness is emphasized during assembly, with seals, O-rings and other parts replaced as needed. The instructions ensure the swing drive is properly disassembled and reassembled.
Caterpillar Cat 345D L Excavator (Prefix RAJ) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components like the head, plates, seals, and piston assemblies. The disassembly process is described in 31 steps. The assembly section then lists 13 steps to reinstall components in reverse order, making sure to clean parts and apply new seals and lubricants.
This document provides instructions for removing and installing fuel injection pumps and disassembling and assembling fuel ratio control components on a Caterpillar 3406C diesel engine. The steps include using various tools to remove the fuel injection pumps from the pump housing, install new pumps, and check pump installation. Instructions are also provided to disassemble the fuel ratio control housing by removing bolts, springs, diaphragms and other parts and cleaning components before reassembly.
More Related Content
Similar to Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant Download.pdf
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, carriers, bearings, and washers. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, sun gear, planetary gears, retain rings, washers and bearings.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...yqen95561858
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f7usuejkdkddm3
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...ufs89eodkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...jdkskmmdmd1
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjfyjsekdmme
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive by removing coupling and bolts.
3) Dismantling the final drive further by removing its cover, gears, bearings, and other internal components.
The assembly instructions are provided in reverse order. Precise torques are specified for reinstalling each component.
Similar to Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant Download.pdf (12)
This document provides instructions for disassembling and assembling the final drive of an excavator. It lists the required tools and parts. The disassembly process involves removing 37 individual components in a specific order, including gears, shafts, seals, washers, and housings. The assembly section provides instructions for installing these components in reverse order and notes on cleaning, lubricating, and setting proper bearing preload using shims.
Caterpillar Cat 325D L Excavator (Prefix GBR) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions to disassemble a final drive over 33 steps. Key steps include removing the cover, gears, carrier assemblies, planetary gears, and seals. Cleanliness is important to prevent dirt entering during disassembly. Various tools are required including a transmission repair stand, link brackets, retaining ring pliers, and a slide hammer puller. The total weight of disassembled parts is provided.
Caterpillar Cat 323D L Excavator (Prefix JLG) Service Repair Manual Instant D...fujkskemdmdm4r
1. The document provides instructions for removing and installing inlet and exhaust valve seat inserts for a C6.4 engine. It describes the required tools and steps to remove the old inserts and install new ones.
2. Procedures are provided for removing, disassembling, and assembling the engine oil cooler. Parts are to be kept clean from contaminants to prevent damage.
3. Instructions are given for removing and installing the engine oil relief valve, including replacing the gasket. Cleanliness is important to prevent premature wear.
1) The document provides assembly instructions for a final drive on an excavator.
2) It involves over 40 steps to assemble bearings, seals, gears, carriers, housing and cover components.
3) Special tools and procedures are required to set bearing preloads, install seals, and test for leaks. Proper torque values and sealants are specified.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, which powers a 345D L excavator. The procedures include removing the electric starting motor, flywheel, rear crankshaft seal, and other rear gear components. Detailed illustrations show the components and tools used. Precautions are provided to properly support heavy components and contain fluids.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions emphasize cleaning parts and ensuring they are reinstalled in their original locations to avoid damage and contamination.
Caterpillar Cat 345D L Excavator (Prefix PBT) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the swing drive of a 345D L excavator. It lists the required tools and gives step-by-step procedures to remove components such as the carrier assembly, ring gear, and bearings. Cleanliness is emphasized during assembly, with seals, O-rings and other parts replaced as needed. The instructions ensure the swing drive is properly disassembled and reassembled.
Caterpillar Cat 345D L Excavator (Prefix RAJ) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components like the head, plates, seals, and piston assemblies. The disassembly process is described in 31 steps. The assembly section then lists 13 steps to reinstall components in reverse order, making sure to clean parts and apply new seals and lubricants.
This document provides instructions for removing and installing fuel injection pumps and disassembling and assembling fuel ratio control components on a Caterpillar 3406C diesel engine. The steps include using various tools to remove the fuel injection pumps from the pump housing, install new pumps, and check pump installation. Instructions are also provided to disassemble the fuel ratio control housing by removing bolts, springs, diaphragms and other parts and cleaning components before reassembly.
Caterpillar Cat 345C and 345C L Excavator (Prefix BWY) Service Repair Manual ...fujkskemdmdm4r
This document provides instructions for disassembling and assembling a travel motor. The disassembly procedure involves 31 steps to remove parts like the head, plates, disks, seals, pistons, and housing. The assembly procedure reverses the disassembly with 13 steps like installing seals, spacers, pistons, plates and tightening components. Precautions are provided to keep parts clean and in correct orientation to prevent contamination of the hydraulic system.
Caterpillar Cat 345C and 345C L Excavator (Prefix TBA) Service Repair Manual ...fujkskemdmdm4r
This document provides instructions for disassembling and assembling a travel motor. The disassembly procedure involves 31 steps to remove parts like the head, pins, plates, seals, pistons, disks, and bearings. The assembly procedure reverses the disassembly process in 30 steps and provides notes about cleaning parts, applying lubricant, and ensuring proper orientation of components like washers. Tools required are listed for both procedures.
Caterpillar Cat 345D L Excavator (Prefix MLK) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for assembling and installing a travel motor. It outlines 34 steps for assembling components like pistons, seals, plates, and bearings. It also describes using tools to measure clearances and distances during assembly. Finally, it details installing the assembled travel motor using lifting devices and bolts, and connecting hydraulic hose assemblies.
The document provides instructions for removing and installing the drive shaft group with retarder on a 621E, 623E, or 627E tractor. It describes disconnecting hydraulic lines and removing bolts, covers, and housing to access the drive shaft group. Special care must be taken when removing plates and springs from the retarder, as they are under pressure. The process is reversed for installation, reconnecting hydraulic lines and replacing removed components.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix WBC) Service Repair Manua...fujkskemdmdm4r
The document provides instructions for removing and installing various engine components, including:
- Valve guides are removed from the cylinder head using a valve guide driver tool. New guides are installed using driver tools until the proper height is reached.
- Valve seat inserts are removed from the cylinder head using extractors. New inserts are installed using a driver tool after being cooled.
- The engine oil filter base, oil filter, and oil cooler are removed. Hoses are disconnected and bolts removed to access these components.
Caterpillar Cat 336D L Excavator (Prefix PTB) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides assembly instructions for a 336D L excavator transmission in 3 sentences:
It lists the required tools and parts, gives step-by-step instructions for assembling the transmission housing, installing planetary gears and carriers, and attaching the transmission cover, and notes that cleanliness is important during assembly and O-rings and seals should always be replaced.
The document provides step-by-step instructions for disassembling and assembling the final drives of a 350L excavator. Key steps include removing the final drives and travel motors, disassembling the internal components of the final drives which include multiple planetary gear sets, carriers, and a sun gear, and then reassembling the final drives in reverse order. Proper cleaning, application of lubricants, and torque specifications are noted throughout to ensure correct reassembly.
Caterpillar Cat 350 and 350 L Excavator (Prefix 8HK) Service Repair Manual In...fujkskemdmdm4r
The document provides instructions for removing and installing various engine components on a 350-A EXCAVATOR 8HK excavator powered by a 3306 engine, including:
- Removing the cylinder head by first removing the fuel injection lines, exhaust manifold, rocker shaft and pushrods, then removing bolts and lifting the cylinder head off the engine block.
- Instructions for disassembling, assembling, and installing the rocker shaft, including removing/installing rocker arms, supports, springs and O-rings.
- Steps for installing a compression brake on the engine, including installing brackets, bolts and connecting wires.
Caterpillar Cat 345D L Excavator (Prefix YEE) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for removing and installing various engine components on a Caterpillar 345D L excavator, including:
- Removing and installing the rear gear group. This involves removing several gears, seals, bolts and bearings. Precise positioning of bearings is required during installation.
- Removing the flywheel using lifting equipment and tools. The flywheel weighs approximately 79 kg.
- Removing and installing the crankshaft rear seal using bolts, sealant and cleaning of parts. Proper inspection of the crankshaft surface is also noted.
Caterpillar Cat 350 and 350 L Excavator (Prefix 3ML) Service Repair Manual In...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the governor of a 350-A excavator powered by a 3306 engine. The disassembly process involves removing 34 parts from the governor including the fuel ratio control, housing, springs, levers, pins, plates, screws, solenoid, shaft and other components. The assembly process describes installing these 34 parts in the reverse order and includes ensuring parts are clean and lubricated before installation. Special tools are required for some steps.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR FJH
Configuration: 336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07175112
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 17 10:42:46 UTC+0800 2020
10/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEB...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR FJH
Configuration: 336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07191698
Final Drive and Travel Motor - Remove and Install
SMCS - 4050; 4351
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Refer to Operation and Maintenance Manual, "Final Drive Oil - Change" for the correct
draining and filling procedures.
1/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 1 g02108761
2. Remove bolts (1) and cover (2).
3. Separate the track.
Illustration 2 g02108762
4. Disconnect hose assemblies (3) ( 4), and (6). Remove fitting (5).
2/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g02108781
5. Attach Tooling (A) and a suitable lifting device to final drive and travel motor (7). The
weight of final drive and travel motor (7) is approximately 860 kg (1896 lb). Put a slight
lifting tension on final drive and travel motor (7).
Illustration 4 g02108790
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
6. Remove bolts (8).
Illustration 5 g02108791
7. Use two bolts (8) to remove final drive and travel motor (7).
8. Carefully remove final drive and travel motor (7).
9. Remove bolts (8) from the frame.
3/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 6 g02108793
10. Remove bolts (9), counterbalance valve (10), and the O-ring seals.
Illustration 7 g02108794
11. Attach Tooling (B) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 84 kg (185 lb).
12. Remove four bolts (12) and travel motor (11) from final drive (13).
4/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 8 g02108914
13. Remove coupling (14).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
C - Loctite C5A Copper Anti-Seize -
1. Before assembly remove all compounds, oil, and dust.
2. Install final drive and travel motor (7) in the reverse order of removal.
a. Tighten bolts (9) to a torque of 80 ± 8 N·m (60 ± 6 lb ft).
b. Apply Tooling (C) to the threads of bolt (8).
c. Tighten bolts (8) to a torque of 250 ± 25 N·m (184 ± 18 lb ft) and turn an additional
angle of 45 ± 5 degrees. Refer to Service Magazine, M0083843, "An Improved Bolt
Tightening Procedure for the Critical Joints Is Now Used on All Excavators" for more
detail information.
d. Tighten hose assembly (3) to a torque of 160 ± 16 N·m (120 ± 12 lb ft).
e. Tighten bolts (1) to a torque of 130 ± 10 N·m (95 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 17 10:43:42 UTC+0800 2020
5/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR FJH
Configuration: 336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i03885522
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
Start By:
a. Remove the final drive and the travel motor.
Illustration 1 g02131413
1/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 1. Attach Tooling (A) and a suitable lifting device to cover (2). The weight of cover (2) is
approximately 20 kg (45 lb). Remove bolts (1) and cover (2).
Illustration 2 g02131414
2. Remove plate (3) from cover (2).
Illustration 3 g02131415
3. Remove sun gear (4), spacer (5), and planetary gear assembly (6).
2/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 4 g02131875
4. Remove retaining ring (7), washer (8), planetary gear (9), roller bearing (11), and washer
(12) from carrier assembly (13).
5. Remove retaining ring (10) and sun gear (14) from carrier assembly (13).
Illustration 5 g02131876
6. Remove spacer (16).
7. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (15). The weight
of planetary gear assembly (15) is approximately 32 kg (70 lb). Remove planetary gear
assembly (15).
3/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 6 g02131877
8. Drive spring pin (17) into planetary shaft (18) with a suitable hammer and a suitable punch.
9. Remove planetary shaft (18), washer (20), roller bearing (20), planetary gear (23), and
washer (24) from the carrier assembly (21).
10. Remove spring pin (17) from planetary shaft (18) with a suitable hammer and a suitable
punch.
11. Remove retaining ring (19) and sun gear (25) from carrier assembly (21).
Illustration 7 g02131878
12. Remove spacer (26).
13. Attach Tooling (A) and a suitable lifting device to ring gear (27). The weight of ring gear
(27) is approximately 70 kg (155 lb). Remove bolts (28) and ring gear (27).
4/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 8 g02131879
14. Remove O-ring seal (29).
15. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (30). The weight
of planetary gear assembly (30) is approximately 57 kg (125 lb). Remove planetary gear
assembly (30).
Illustration 9 g02131881
16. Drive spring pin (31) into planetary shaft (32) with a suitable hammer and a suitable punch.
17. Remove planetary shaft (32), washer (33), roller bearings (35), planetary gear (36), and
washer (36) from the carrier assembly (34).
18. Remove spring pin (31) from planetary shaft (32) with a suitable hammer and a suitable
punch.
5/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 10 g02131882
Illustration 11 g02131885
19. Remove bolts (38). Use Tooling (B) in order to remove gear (39).
Illustration 12 g02131886
20. Remove shims (40).
6/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 13 g02131887
21. Attach Tooling (C) and a suitable lifting device to sprocket housing (41). The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Remove sprocket housing (41) and
roller bearing (42).
Illustration 14 g02131888
22. Remove bearing races (43) and Duo-Cone seal (44) from sprocket housing (41).
7/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 15 g02132155
23. Remove Duo-Cone seal (45) and roller bearing (47) from motor housing (48). The weight of
motor housing (48) is approximately 91 kg (200 lb).
24. If necessary, remove dowels (46) from motor housing (48).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 17 10:44:38 UTC+0800 2020
8/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR FJH
Configuration: 336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i05103849
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
D 5P-3931 Anti-Seize Compound -
E 1U-9895 Crossblock 1
F 6V-2012 Depth Micrometer 1
G 6V-7059 Micrometer () 1
H - Loctite 242 -
J 6V-2055 Grease -
K - Loctite 17430 -
L 8T-9206 Seal Installer 1
1/12
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 1 g02132155
1. Apply Tooling (D) to the surface of dowels (46) . Install dowels (46) .
2. Raise the temperature of roller bearing (47) . Install the roller bearing (47) on motor housing
(48) .
3. Install Duo-Cone seal (45) .
Illustration 2 g02131888
4. Lower the temperature of bearing races (43) . Install bearing races (43) in sprocket housing
(41) .
5. Install Duo-Cone seal (44) .
2/12
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
28. Illustration 3 g02131887
6. Attach Tooling (C) and a suitable lifting device to sprocket housing (41) . The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Install sprocket housing (41) .
7. Raise the temperature of roller bearing (42) . Install the roller bearing (42) .
Illustration 4 g02135728
3/12
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 5 g02134214
8. Use Tooling (E) and a suitable press in order to apply force to roller bearing (42) . Apply a
force of 4000 kg (8818 lb) to the top of Tooling (E) . Rotate sprocket housing (41) in order
to seat the roller bearings.
9. Reduce the force on top of Tooling (E) to 3000 ± 300 kg (6614 ± 661 lb). Use Tooling (F)
in order to measure Dimension (X) . Record Dimension (X) .
4/12
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...