This document provides instructions for removing and installing a travel motor on an excavator. It outlines 27 steps for disassembly, including draining oil, removing hoses and bolts, and using lifting devices to remove the final drive and travel motor assembly. The installation procedure is the reverse of removal, and specifies torques for bolts and using anti-seize compound on threads. The overall process involves carefully removing and reinstalling multiple components of the excavator's hydraulic system.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjsekqazxkdmmem
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing the final drive and travel motor assembly.
2) Attaching lifting equipment and removing bolts to separate the travel motor from the final drive and remove the assemblies.
3) Reversing the process to install the travel motor onto the final drive and reinstall the assembled unit along with hydraulic connections.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjkkekmdm
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...hfhjskedme
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic lines before removal.
2) Using lifting equipment to remove the final drive and travel motor assembly, travel motor, and coupling.
3) Cleaning and lubricating parts before reverse installation, and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...jdkskmmdmd1
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing the final drive and travel motor assembly.
2) Attaching lifting equipment and removing bolts to separate the travel motor from the final drive and remove the assemblies.
3) Reversing the process to install the travel motor onto the final drive and reinstall the assembled unit along with hydraulic connections.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjsekqazxkdmmem
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing the final drive and travel motor assembly.
2) Attaching lifting equipment and removing bolts to separate the travel motor from the final drive and remove the assemblies.
3) Reversing the process to install the travel motor onto the final drive and reinstall the assembled unit along with hydraulic connections.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjkkekmdm
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...hfhjskedme
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic lines before removal.
2) Using lifting equipment to remove the final drive and travel motor assembly, travel motor, and coupling.
3) Cleaning and lubricating parts before reverse installation, and torquing bolts to the specified values.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...jdkskmmdmd1
This document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing the final drive and travel motor assembly.
2) Attaching lifting equipment and removing bolts to separate the travel motor from the final drive and remove the assemblies.
3) Reversing the process to install the travel motor onto the final drive and reinstall the assembled unit along with hydraulic connections.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, carriers, bearings, and washers. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, sun gear, planetary gears, retain rings, washers and bearings.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...yqen95561858
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f7usuejkdkddm3
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...ufs89eodkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...jdkskmmdmd1
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjfyjsekdmme
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive by removing coupling and bolts.
3) Dismantling the final drive further by removing its cover, gears, bearings, and other internal components.
The assembly instructions are provided in reverse order. Precise torques are specified for reinstalling each component.
Caterpillar Cat 345C and 345C L Hydraulic Excavator (Prefix PJW) Service Repa...fijsekkdmdm2w
The document provides assembly instructions for a final drive on an excavator model 345C. It involves 17 steps including installing bearing cups, applying anti-seize compound, installing various seals and gears, and adjusting bearing preload using shims. Precision is required to prevent damage to seals and ensure proper engagement of gears. Lifting devices and care are needed due to components weighing up to 127 kg.
Caterpillar Cat 345C and 345C L Excavator (Prefix TBA) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps to disassemble the motor by removing components like the head, plates, seals, pins, pistons and housing pieces. Identification marks should be made on parts for reassembly. Cleaning is important to prevent contamination. The assembly procedure is not described.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, which powers a 345D L excavator. The procedures include removing the electric starting motor, flywheel, rear crankshaft seal, and other rear gear components. Detailed illustrations show the components and tools used. Precautions are provided to properly support heavy components and contain fluids.
Caterpillar Cat 336E and 336E L Excavator (Prefix KED) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions for assembling a travel motor on an excavator. It describes 27 steps to assemble internal components like seals, springs, and bearings. These components include pistons, a cam plate, and a rotating assembly. The final steps connect the travel motor to the final drive and install exterior covers. Proper assembly requires using the correct tools and lubricants, and ensuring parts are aligned and torques are set correctly.
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions to remove and install the final drive and travel motor assembly on a 336D L excavator. The removal procedure involves 13 steps including disconnecting hoses, removing bolts, and lifting the assembly off with the aid of tools. The installation procedure reverses these steps, taking care to properly position the components and tighten bolts to the specified torques. Proper containment of fluids and cleaning of parts is emphasized throughout.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, seals, gears, and housings. The 21 step assembly procedure describes installing these components in reverse order, noting precautions like wearing protective equipment and using torque wrenches to specified settings. Tools required include link brackets, crossblocks, drivers, sockets, and lifting adapters.
Caterpillar Cat 336D2 L Excavator (Prefix ZCT) Service Repair Manual Instant ...fijsekkdmdm2w
This document provides disassembly and assembly instructions for the main hydraulic pump on a 336D2 L excavator. It lists 51 steps to disassemble the pump by removing components like bolts, sensors, valves, springs, pistons, gears, and bearings. The assembly section lists 48 steps to reinstall these components in reverse order, noting the need to heat some bearings before installation and ensure proper placement of pins, seals, and other parts. Precautions are provided for releasing spring forces. Required tools include various pliers, pins, and links to aid in removal and installation of components.
Caterpillar Cat 330F and 330F L Excavator (Prefix GHT) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions for disassembling a 330F excavator travel motor. It describes 28 steps to disassemble the various components of the travel motor, including removing the head assembly, brake piston, rotating assembly, pistons, seals, and other parts. Tools required include retaining ring pliers, a bearing puller, bolts, threaded rods, and other hardware. Safety precautions are provided to release spring forces carefully.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...fijsekkdmdm2w
This document provides instructions for disassembling the travel motor on a 336D2L excavator. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs, and more. Precautions are provided to watch for spring forces and contain fluids. Tools needed include a transmission repair stand, lifting eye assembly, driver group, and other specialized tools. Reassembly will follow the disassembly steps in reverse order.
This document provides instructions for disassembling and assembling the torque converter and transmission of a 938F wheel loader. It describes removing over 20 components of the torque converter including the transmission cover, driver gear, stator carrier, and retaining rings. It then details disassembling the transmission by removing the shafts, gears, clutch plates, seals, and over 15 additional parts. The goal is to allow maintenance and repair of these core powertrain systems.
More Related Content
Similar to Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant Download.pdf
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor and final drive components of an excavator. The disassembly process involves removing the cover, plate, sun gear, spacer, planetary gear assembly, retaining ring, washer and planetary gear. The assembly process details installing these components in reverse order and applying the specified torques to the fasteners. Safety precautions are provided to prevent injury when working with pressurized hydraulic systems and spring-loaded components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, carriers, bearings, and washers. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, sun gear, planetary gears, retain rings, washers and bearings.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...yqen95561858
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...f7usuejkdkddm3
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...ufs89eodkdmdm
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive, which involves removing coupling, bolts, and lifting the travel motor away.
3) Disassembling the final drive further by removing the cover, gears, bearings, and other internal components. Detailed illustrations accompany each step.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual (BMH00001...jdkskmmdmd1
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, disconnecting hoses, removing bolts and carefully lifting out the assembly. Proper tools and safety precautions are also noted.
Caterpillar cat 336 e l excavator (prefix bmh) service repair manual (bmh0000...fjjfyjsekdmme
The document provides instructions for assembling and disassembling a travel motor on an excavator. It describes 27 steps for assembling the travel motor, including installing seals, springs, pistons, bearings and other components in the proper order. 13 steps are listed for removing the final drive and travel motor assembly, which includes draining oil, removing hoses, bolts and other fasteners. Proper tools and lifting equipment are required due to the heavy weight of the components.
Caterpillar Cat 336E L Excavator (Prefix BMH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling the travel motor and final drive of an excavator. It describes in detail:
1) Removing the final drive and travel motor as a unit from the excavator frame, which requires draining oil, disconnecting hoses, and removing bolts.
2) Separating the travel motor from the final drive by removing coupling and bolts.
3) Dismantling the final drive further by removing its cover, gears, bearings, and other internal components.
The assembly instructions are provided in reverse order. Precise torques are specified for reinstalling each component.
Similar to Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant Download.pdf (12)
Caterpillar Cat 345C and 345C L Hydraulic Excavator (Prefix PJW) Service Repa...fijsekkdmdm2w
The document provides assembly instructions for a final drive on an excavator model 345C. It involves 17 steps including installing bearing cups, applying anti-seize compound, installing various seals and gears, and adjusting bearing preload using shims. Precision is required to prevent damage to seals and ensure proper engagement of gears. Lifting devices and care are needed due to components weighing up to 127 kg.
Caterpillar Cat 345C and 345C L Excavator (Prefix TBA) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps to disassemble the motor by removing components like the head, plates, seals, pins, pistons and housing pieces. Identification marks should be made on parts for reassembly. Cleaning is important to prevent contamination. The assembly procedure is not described.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, which powers a 345D L excavator. The procedures include removing the electric starting motor, flywheel, rear crankshaft seal, and other rear gear components. Detailed illustrations show the components and tools used. Precautions are provided to properly support heavy components and contain fluids.
Caterpillar Cat 336E and 336E L Excavator (Prefix KED) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions for assembling a travel motor on an excavator. It describes 27 steps to assemble internal components like seals, springs, and bearings. These components include pistons, a cam plate, and a rotating assembly. The final steps connect the travel motor to the final drive and install exterior covers. Proper assembly requires using the correct tools and lubricants, and ensuring parts are aligned and torques are set correctly.
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions to remove and install the final drive and travel motor assembly on a 336D L excavator. The removal procedure involves 13 steps including disconnecting hoses, removing bolts, and lifting the assembly off with the aid of tools. The installation procedure reverses these steps, taking care to properly position the components and tighten bolts to the specified torques. Proper containment of fluids and cleaning of parts is emphasized throughout.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly procedure includes removing components like bolts, seals, gears, and housings. The 21 step assembly procedure describes installing these components in reverse order, noting precautions like wearing protective equipment and using torque wrenches to specified settings. Tools required include link brackets, crossblocks, drivers, sockets, and lifting adapters.
Caterpillar Cat 336D2 L Excavator (Prefix ZCT) Service Repair Manual Instant ...fijsekkdmdm2w
This document provides disassembly and assembly instructions for the main hydraulic pump on a 336D2 L excavator. It lists 51 steps to disassemble the pump by removing components like bolts, sensors, valves, springs, pistons, gears, and bearings. The assembly section lists 48 steps to reinstall these components in reverse order, noting the need to heat some bearings before installation and ensure proper placement of pins, seals, and other parts. Precautions are provided for releasing spring forces. Required tools include various pliers, pins, and links to aid in removal and installation of components.
Caterpillar Cat 330F and 330F L Excavator (Prefix GHT) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions for disassembling a 330F excavator travel motor. It describes 28 steps to disassemble the various components of the travel motor, including removing the head assembly, brake piston, rotating assembly, pistons, seals, and other parts. Tools required include retaining ring pliers, a bearing puller, bolts, threaded rods, and other hardware. Safety precautions are provided to release spring forces carefully.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...fijsekkdmdm2w
This document provides instructions for disassembling the travel motor on a 336D2L excavator. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs, and more. Precautions are provided to watch for spring forces and contain fluids. Tools needed include a transmission repair stand, lifting eye assembly, driver group, and other specialized tools. Reassembly will follow the disassembly steps in reverse order.
This document provides instructions for disassembling and assembling the torque converter and transmission of a 938F wheel loader. It describes removing over 20 components of the torque converter including the transmission cover, driver gear, stator carrier, and retaining rings. It then details disassembling the transmission by removing the shafts, gears, clutch plates, seals, and over 15 additional parts. The goal is to allow maintenance and repair of these core powertrain systems.
Caterpillar Cat 325C and 325C L Excavator (Prefix BMM) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions to disassemble a final drive assembly. Key steps include:
1. Marking the final drive for alignment and removing it from the machine.
2. Removing the cover, gears, spacers, and carrier assemblies.
3. Disassembling the carrier assemblies by pressing out pins and removing gears and bearings.
4. Removing the ring gears from the main housing after lifting with slings.
Caterpillar Cat 336D L Excavator (Prefix JBF) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for installing a unit injector sleeve on a Caterpillar C9 engine. It lists the required tools and gives step-by-step details for cleaning the sleeve and cylinder head bore, applying seals and retaining compound, and installing the sleeve using a hammer and installer tool. Proper installation is important to prevent leaks that could cause low pressure or excess oil consumption.
Caterpillar Cat 926 and 926E WHEEL LOADER (Prefix 8NB) Service Repair Manual ...fijsekkdmdm2w
This document provides instructions for removing and installing the cylinder head assembly on a 3204 vehicular engine. It describes:
1) Removing the cylinder head assembly by loosening hoses, removing bolts, and lifting it off with a hoist.
2) Cleaning and installing a new gasket before lowering the cylinder head back onto the cylinder block and tightening bolts in a specific sequence and torque.
3) Checking the flatness of the cylinder head and block surfaces during installation.
This document provides instructions for disassembling and assembling the torque converter and transmission of a Caterpillar 938F wheel loader. It details removing over 40 individual parts in 21 steps to disassemble the torque converter. A further 44 steps describe disassembling the transmission by removing components like shafts, gears, seals, and clutches. Precise tools and lifting devices are specified to carefully remove heavy parts. Reassembly is outlined in reverse order with notes to check components for wear and replace as needed.
Caterpillar Cat 325C and 325C L Excavator (Prefix BKW) Service Repair Manual ...fijsekkdmdm2w
This document provides instructions for disassembling and assembling the final drive of 325C and 325C L excavator models. The disassembly procedure involves removing over 30 individual parts from the final drive housing in a specific sequence. The assembly procedure instructs to clean all parts thoroughly, apply lubricants, and install the parts in the reverse order of disassembly while ensuring proper alignment and torque specifications are followed. Tools required include a transmission repair stand, link brackets, retaining ring pliers, and other specialized tools.
This document provides instructions for disassembling and assembling the piston pump of a 623G wheel scraper. Some key steps include:
1. Marking all mating components for alignment during assembly.
2. Removing various seals, springs, spools, and other internal parts from the pump housing and head.
3. Checking the preload on bearings during assembly by measuring clearance between the pump head and housing.
4. Cleaning all parts thoroughly before assembly and applying a light oil film. Precise alignment of marked components is important.
This document provides instructions for disassembling and assembling axle shaft assemblies for a 938F wheel loader. It describes removing components like the axle housing groups, axle shaft assembly, planetary carrier assembly, and installing new components in reverse order. Key steps include using various tools to remove retaining rings, planetary gears, and installing new bearings and seals at specified temperatures while ensuring proper torque specifications are met.
The document provides instructions for removing and installing fuel injection pumps on a Caterpillar 3406C diesel engine. Key steps include using various tools to hold components in place, loosening and removing bushings, seals and pumps. Reinstallation involves aligning pins and slots, installing spacers and seals correctly, and checking rack travel measurements to ensure proper installation. The document also describes disassembling and assembling the fuel injection pumps and fuel injection pump housing.
The document provides step-by-step instructions for disassembling and assembling the final drives of a 350L excavator. Key steps include removing the final drives and travel motors, disassembling the internal components of the final drives which include multiple planetary gear sets, carriers, and a sun gear, and then reassembling the final drives in reverse order. Proper cleaning, application of lubricants, and torque specifications are noted throughout to ensure correct reassembly.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is done in reverse order.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR FJH
Configuration: 336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07175112
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 17 10:42:46 UTC+0800 2020
10/10
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEB...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR FJH
Configuration: 336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07191698
Final Drive and Travel Motor - Remove and Install
SMCS - 4050; 4351
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Refer to Operation and Maintenance Manual, "Final Drive Oil - Change" for the correct
draining and filling procedures.
1/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 1 g02108761
2. Remove bolts (1) and cover (2).
3. Separate the track.
Illustration 2 g02108762
4. Disconnect hose assemblies (3) ( 4), and (6). Remove fitting (5).
2/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g02108781
5. Attach Tooling (A) and a suitable lifting device to final drive and travel motor (7). The
weight of final drive and travel motor (7) is approximately 860 kg (1896 lb). Put a slight
lifting tension on final drive and travel motor (7).
Illustration 4 g02108790
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
6. Remove bolts (8).
Illustration 5 g02108791
7. Use two bolts (8) to remove final drive and travel motor (7).
8. Carefully remove final drive and travel motor (7).
9. Remove bolts (8) from the frame.
3/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 6 g02108793
10. Remove bolts (9), counterbalance valve (10), and the O-ring seals.
Illustration 7 g02108794
11. Attach Tooling (B) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 84 kg (185 lb).
12. Remove four bolts (12) and travel motor (11) from final drive (13).
4/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 8 g02108914
13. Remove coupling (14).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
C - Loctite C5A Copper Anti-Seize -
1. Before assembly remove all compounds, oil, and dust.
2. Install final drive and travel motor (7) in the reverse order of removal.
a. Tighten bolts (9) to a torque of 80 ± 8 N·m (60 ± 6 lb ft).
b. Apply Tooling (C) to the threads of bolt (8).
c. Tighten bolts (8) to a torque of 250 ± 25 N·m (184 ± 18 lb ft) and turn an additional
angle of 45 ± 5 degrees. Refer to Service Magazine, M0083843, "An Improved Bolt
Tightening Procedure for the Critical Joints Is Now Used on All Excavators" for more
detail information.
d. Tighten hose assembly (3) to a torque of 160 ± 16 N·m (120 ± 12 lb ft).
e. Tighten bolts (1) to a torque of 130 ± 10 N·m (95 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 17 10:43:42 UTC+0800 2020
5/5
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR FJH
Configuration: 336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i03885522
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
Start By:
a. Remove the final drive and the travel motor.
Illustration 1 g02131413
1/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 1. Attach Tooling (A) and a suitable lifting device to cover (2). The weight of cover (2) is
approximately 20 kg (45 lb). Remove bolts (1) and cover (2).
Illustration 2 g02131414
2. Remove plate (3) from cover (2).
Illustration 3 g02131415
3. Remove sun gear (4), spacer (5), and planetary gear assembly (6).
2/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 4 g02131875
4. Remove retaining ring (7), washer (8), planetary gear (9), roller bearing (11), and washer
(12) from carrier assembly (13).
5. Remove retaining ring (10) and sun gear (14) from carrier assembly (13).
Illustration 5 g02131876
6. Remove spacer (16).
7. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (15). The weight
of planetary gear assembly (15) is approximately 32 kg (70 lb). Remove planetary gear
assembly (15).
3/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 6 g02131877
8. Drive spring pin (17) into planetary shaft (18) with a suitable hammer and a suitable punch.
9. Remove planetary shaft (18), washer (20), roller bearing (20), planetary gear (23), and
washer (24) from the carrier assembly (21).
10. Remove spring pin (17) from planetary shaft (18) with a suitable hammer and a suitable
punch.
11. Remove retaining ring (19) and sun gear (25) from carrier assembly (21).
Illustration 7 g02131878
12. Remove spacer (26).
13. Attach Tooling (A) and a suitable lifting device to ring gear (27). The weight of ring gear
(27) is approximately 70 kg (155 lb). Remove bolts (28) and ring gear (27).
4/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 8 g02131879
14. Remove O-ring seal (29).
15. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (30). The weight
of planetary gear assembly (30) is approximately 57 kg (125 lb). Remove planetary gear
assembly (30).
Illustration 9 g02131881
16. Drive spring pin (31) into planetary shaft (32) with a suitable hammer and a suitable punch.
17. Remove planetary shaft (32), washer (33), roller bearings (35), planetary gear (36), and
washer (36) from the carrier assembly (34).
18. Remove spring pin (31) from planetary shaft (32) with a suitable hammer and a suitable
punch.
5/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 10 g02131882
Illustration 11 g02131885
19. Remove bolts (38). Use Tooling (B) in order to remove gear (39).
Illustration 12 g02131886
20. Remove shims (40).
6/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 13 g02131887
21. Attach Tooling (C) and a suitable lifting device to sprocket housing (41). The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Remove sprocket housing (41) and
roller bearing (42).
Illustration 14 g02131888
22. Remove bearing races (43) and Duo-Cone seal (44) from sprocket housing (41).
7/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 15 g02132155
23. Remove Duo-Cone seal (45) and roller bearing (47) from motor housing (48). The weight of
motor housing (48) is approximately 91 kg (200 lb).
24. If necessary, remove dowels (46) from motor housing (48).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 17 10:44:38 UTC+0800 2020
8/8
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR FJH
Configuration: 336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i05103849
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
D 5P-3931 Anti-Seize Compound -
E 1U-9895 Crossblock 1
F 6V-2012 Depth Micrometer 1
G 6V-7059 Micrometer () 1
H - Loctite 242 -
J 6V-2055 Grease -
K - Loctite 17430 -
L 8T-9206 Seal Installer 1
1/12
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 1 g02132155
1. Apply Tooling (D) to the surface of dowels (46) . Install dowels (46) .
2. Raise the temperature of roller bearing (47) . Install the roller bearing (47) on motor housing
(48) .
3. Install Duo-Cone seal (45) .
Illustration 2 g02131888
4. Lower the temperature of bearing races (43) . Install bearing races (43) in sprocket housing
(41) .
5. Install Duo-Cone seal (44) .
2/12
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
28. Illustration 3 g02131887
6. Attach Tooling (C) and a suitable lifting device to sprocket housing (41) . The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Install sprocket housing (41) .
7. Raise the temperature of roller bearing (42) . Install the roller bearing (42) .
Illustration 4 g02135728
3/12
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 5 g02134214
8. Use Tooling (E) and a suitable press in order to apply force to roller bearing (42) . Apply a
force of 4000 kg (8818 lb) to the top of Tooling (E) . Rotate sprocket housing (41) in order
to seat the roller bearings.
9. Reduce the force on top of Tooling (E) to 3000 ± 300 kg (6614 ± 661 lb). Use Tooling (F)
in order to measure Dimension (X) . Record Dimension (X) .
4/12
336E L Excavators FJH00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP5...
2020/7/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...