The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing springs, seals, valves, piston, sleeve, guide, and housing cover components.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools. The procedures describe disconnecting fuel lines, removing mounting bolts and other hardware, and checking gasket conditions. Pictures and diagrams supplement the text instructions.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. The procedures describe draining fuel, removing bolts and connections, and installing replacement parts in the reverse order. Safety notices recommend keeping parts clean and containing fluids during maintenance.
The document provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
- The fuel priming pump, which is removed by disconnecting lines and tubes and removing mounting bolts. Installation is the reverse.
- The fuel filter base, which is removed by disconnecting lines and removing mounting bolts. A new gasket should be used upon installation.
- The fuel transfer pump, which is removed by disconnecting lines and tubes and removing mounting bolts.
The document provides detailed illustrations and cautions to keep parts clean and contain fluids during the process. Proper removal and installation of gaskets and seals is emphasized.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. The procedures include:
- Turning off the fuel supply and disconnecting tubes and hoses
- Removing bolts and washers securing components and lifting parts off
- Checking condition of gaskets and installing new ones if needed
- Reinstalling components by securing with bolts and reconnecting tubes and hoses
The instructions emphasize cleaning parts and containing fluids during disassembly and reinstallation.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...xiapokang564341
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools, removal procedures with illustrations, and installation procedures with illustrations for each component. The fuel transfer pump section also provides instructions for disassembling and assembling the pump.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...hvy7sbkw8e
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools, removal procedures with illustrations, and installation procedures with illustrations for each component. The fuel transfer pump section also provides multi-step instructions for disassembling and assembling the pump.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...wenxian17880
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes
- Removing the fuel filter base by disconnecting fuel lines and removing securing bolts
- Removing the fuel transfer pump by turning off the fuel supply and removing securing bolts and tubes
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves and other internal components
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves, pistons, sleeves, and other internal components.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools. The procedures describe disconnecting fuel lines, removing mounting bolts and other hardware, and checking gasket conditions. Pictures and diagrams supplement the text instructions.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. The procedures describe draining fuel, removing bolts and connections, and installing replacement parts in the reverse order. Safety notices recommend keeping parts clean and containing fluids during maintenance.
The document provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
- The fuel priming pump, which is removed by disconnecting lines and tubes and removing mounting bolts. Installation is the reverse.
- The fuel filter base, which is removed by disconnecting lines and removing mounting bolts. A new gasket should be used upon installation.
- The fuel transfer pump, which is removed by disconnecting lines and tubes and removing mounting bolts.
The document provides detailed illustrations and cautions to keep parts clean and contain fluids during the process. Proper removal and installation of gaskets and seals is emphasized.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. The procedures include:
- Turning off the fuel supply and disconnecting tubes and hoses
- Removing bolts and washers securing components and lifting parts off
- Checking condition of gaskets and installing new ones if needed
- Reinstalling components by securing with bolts and reconnecting tubes and hoses
The instructions emphasize cleaning parts and containing fluids during disassembly and reinstallation.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...xiapokang564341
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools, removal procedures with illustrations, and installation procedures with illustrations for each component. The fuel transfer pump section also provides instructions for disassembling and assembling the pump.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...hvy7sbkw8e
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools, removal procedures with illustrations, and installation procedures with illustrations for each component. The fuel transfer pump section also provides multi-step instructions for disassembling and assembling the pump.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...wenxian17880
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes
- Removing the fuel filter base by disconnecting fuel lines and removing securing bolts
- Removing the fuel transfer pump by turning off the fuel supply and removing securing bolts and tubes
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves and other internal components
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves, pistons, sleeves, and other internal components.
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves, pistons, sleeves, and other internal components.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Disassembly and assembly of the fuel transfer pump is also outlined.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, checking gaskets, and reinstalling components in the reverse order while taking precautions to contain fluids.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Disassembly and assembly of the fuel transfer pump is also outlined.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Dismantling and assembling the fuel transfer pump involves removing its internal components like pistons, springs, and valves, and replacing seals before reassembly.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Dismantling and assembling the fuel transfer pump involves removing its internal components like pistons, springs, and valves, and replacing seals before reassembly.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, checking gaskets, and reinstalling components in the reverse order while taking precautions to contain fluids.
Caterpillar cat 235 d excavator (prefix 8kj) service repair manual (8kj00001 ...fujsekfksmemer
This service repair manual provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
1) The fuel priming pump, which includes disconnecting fuel lines and removing mounting bolts.
2) The fuel filter base, which must be removed to access the fuel filter. This involves disconnecting fuel lines and removing mounting bolts.
3) The fuel transfer pump, which is removed by disconnecting fuel lines and removing mounting bolts.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...fujsekksmem
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and the procedures note checking and replacing gaskets as needed. The fuel transfer pump section also details disassembly and assembly steps including spring, seals, and internal components.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...uujjfjjkskmme
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B Excavator. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump by removing covers, springs, seals, pistons, sleeves, and valves.
3) The document emphasizes cleanliness and containing fluids during maintenance.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...fujsefjfkksekem
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B Excavator. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump by removing covers, springs, seals, pistons, sleeves, and valves.
3) The document emphasizes cleanliness and containing fluids during maintenance.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...yhfhjjkdksmme
The document provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
- The fuel priming pump, which is removed by disconnecting hoses and removing mounting bolts. It is installed by reversing the removal steps.
- The fuel filter base, which is removed by disconnecting lines and removing mounting bolts. It is installed by reversing the removal steps and replacing any worn gaskets.
- The fuel transfer pump, which is removed by disconnecting inlet and outlet lines and removing mounting bolts. Disassembly and assembly instructions are also provided.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...fujsjefskekmm
The document provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
- The fuel priming pump, which is removed by disconnecting fuel lines and removing mounting bolts. It is installed by reversing the removal steps.
- The fuel filter base, which is removed by disconnecting fuel lines and removing mounting bolts. It is installed by reversing the removal steps after checking and replacing gaskets if needed.
- The fuel transfer pump, which is removed by disconnecting fuel lines and removing mounting bolts. Detailed steps are provided to disassemble and reassemble the fuel transfer pump components.
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B EXCAVATOR. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump housing by removing covers, springs, seals, pistons, sleeves, and valves.
3) Throughout, it emphasizes cleanliness and proper fluid containment, and provides illustrations of each step.
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B EXCAVATOR. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump housing by removing covers, springs, seals, pistons, sleeves, and valves.
3) Throughout, it emphasizes cleanliness and proper fluid containment, and provides illustrations of each step.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B EXCAVATOR. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump housing by removing covers, springs, seals, pistons, sleeves, and valves.
3) Throughout, it emphasizes cleanliness and proper fluid containment, and provides illustrations of each step.
This document provides instructions for removing and installing various engine components on a 246 Skid Steer Loader, including the turbocharger, exhaust manifold, inlet manifold, and inlet and exhaust valve springs. The removal and installation procedures describe loosening clamps, removing bolts, plugging openings to prevent contamination, cleaning surfaces, and installing new gaskets. Tools required are also listed.
CASE IH STX450 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides instructions for removing and installing an engine. It is a multi-step process that involves disconnecting various electrical and mechanical components like batteries, wiring harnesses, hoses, and mounts. Safety precautions are emphasized throughout. Key steps include draining fluids, removing accessories, disconnecting wiring, and using overhead lifting equipment to maneuver the heavy engine component out of and back into the tractor.
More Related Content
Similar to Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00443).pdf
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves, pistons, sleeves, and other internal components.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Disassembly and assembly of the fuel transfer pump is also outlined.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, checking gaskets, and reinstalling components in the reverse order while taking precautions to contain fluids.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Disassembly and assembly of the fuel transfer pump is also outlined.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Dismantling and assembling the fuel transfer pump involves removing its internal components like pistons, springs, and valves, and replacing seals before reassembly.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Dismantling and assembling the fuel transfer pump involves removing its internal components like pistons, springs, and valves, and replacing seals before reassembly.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, checking gaskets, and reinstalling components in the reverse order while taking precautions to contain fluids.
Caterpillar cat 235 d excavator (prefix 8kj) service repair manual (8kj00001 ...fujsekfksmemer
This service repair manual provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
1) The fuel priming pump, which includes disconnecting fuel lines and removing mounting bolts.
2) The fuel filter base, which must be removed to access the fuel filter. This involves disconnecting fuel lines and removing mounting bolts.
3) The fuel transfer pump, which is removed by disconnecting fuel lines and removing mounting bolts.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...fujsekksmem
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and the procedures note checking and replacing gaskets as needed. The fuel transfer pump section also details disassembly and assembly steps including spring, seals, and internal components.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...uujjfjjkskmme
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B Excavator. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump by removing covers, springs, seals, pistons, sleeves, and valves.
3) The document emphasizes cleanliness and containing fluids during maintenance.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...fujsefjfkksekem
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B Excavator. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump by removing covers, springs, seals, pistons, sleeves, and valves.
3) The document emphasizes cleanliness and containing fluids during maintenance.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...yhfhjjkdksmme
The document provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
- The fuel priming pump, which is removed by disconnecting hoses and removing mounting bolts. It is installed by reversing the removal steps.
- The fuel filter base, which is removed by disconnecting lines and removing mounting bolts. It is installed by reversing the removal steps and replacing any worn gaskets.
- The fuel transfer pump, which is removed by disconnecting inlet and outlet lines and removing mounting bolts. Disassembly and assembly instructions are also provided.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...fujsjefskekmm
The document provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
- The fuel priming pump, which is removed by disconnecting fuel lines and removing mounting bolts. It is installed by reversing the removal steps.
- The fuel filter base, which is removed by disconnecting fuel lines and removing mounting bolts. It is installed by reversing the removal steps after checking and replacing gaskets if needed.
- The fuel transfer pump, which is removed by disconnecting fuel lines and removing mounting bolts. Detailed steps are provided to disassemble and reassemble the fuel transfer pump components.
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B EXCAVATOR. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump housing by removing covers, springs, seals, pistons, sleeves, and valves.
3) Throughout, it emphasizes cleanliness and proper fluid containment, and provides illustrations of each step.
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B EXCAVATOR. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump housing by removing covers, springs, seals, pistons, sleeves, and valves.
3) Throughout, it emphasizes cleanliness and proper fluid containment, and provides illustrations of each step.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B EXCAVATOR. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump housing by removing covers, springs, seals, pistons, sleeves, and valves.
3) Throughout, it emphasizes cleanliness and proper fluid containment, and provides illustrations of each step.
Similar to Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00443).pdf (20)
This document provides instructions for removing and installing various engine components on a 246 Skid Steer Loader, including the turbocharger, exhaust manifold, inlet manifold, and inlet and exhaust valve springs. The removal and installation procedures describe loosening clamps, removing bolts, plugging openings to prevent contamination, cleaning surfaces, and installing new gaskets. Tools required are also listed.
CASE IH STX450 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides instructions for removing and installing an engine. It is a multi-step process that involves disconnecting various electrical and mechanical components like batteries, wiring harnesses, hoses, and mounts. Safety precautions are emphasized throughout. Key steps include draining fluids, removing accessories, disconnecting wiring, and using overhead lifting equipment to maneuver the heavy engine component out of and back into the tractor.
CASE IH STX440 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides instructions for removing and installing an engine. It is a multi-step process that begins by preparing the machine, disconnecting electrical and fluid connections, removing ancillary components, and then lifting the engine out of the machine. The installation process reverses these steps, carefully positioning and securing the engine before reconnecting all electrical and fluid lines. Safety is emphasized throughout with warnings about proper lifting equipment and blocking the machine securely.
CASE IH STX375 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides step-by-step instructions for removing an engine from a tractor. It lists 27 steps including draining fluids, disconnecting wiring harnesses, removing hoses, and detaching mounting hardware. The instructions cover disconnecting batteries, removing the radiator, hood, fuel lines, air intake components, and other parts to fully separate the engine from the tractor.
CASE IH STX325 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides step-by-step instructions for removing an engine from a tractor. It lists 27 steps including draining fluids, disconnecting wiring harnesses, removing hoses, and detaching mounting hardware. The goal is to fully separate the engine from other tractor components to allow for its removal from the vehicle. Safety precautions are outlined at the beginning regarding parking the tractor, relieving pressures, and disconnecting the battery.
CASE IH STX275 Tractor Service Repair Manual.pdfufjskekdjdmw2
The document provides instructions for removing and installing an engine. It is a multi-step process that begins by preparing the machine, disconnecting electrical and fluid connections, removing ancillary components, and then lifting the engine out of the machine. The installation process reverses these steps, carefully positioning and securing the engine before reconnecting all electrical and fluid lines. Safety is emphasized throughout with warnings about proper lifting equipment and blocking the machine securely.
CASE IH Steiger 620 Tier 4B (final) Tractor Service Repair Manual.pdfufjskekdjdmw2
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. The manual provides maintenance and repair information for technicians.
The document provides instructions for removing and installing the engine oil pump on a 242B2 Skid Steer Loader with a 3024C engine. The removal procedure involves removing the front housing, idler gear components, suction pipe, and idler hub. The installation procedure outlines installing the idler hub, gears, rotor, cover, and suction pipe and includes checking end play clearance. Safety notices are provided throughout regarding contained fluids, cleanliness, and spring loaded components.
This document provides instructions for disassembling and assembling the swing and track motors of a 245 Excavator model. It describes in detail removing over 30 individual parts including the swing motor, track motors, pump head, body, barrel, pistons, drive plate and various seals and bearings. Reassembly involves cleaning all parts, applying oil, pressing in bearing cups and cones, installing inserts, joint assembly and other parts in reverse order of disassembly. Precise identification of parts locations and temperatures are required.
Caterpillar Cat 320C L 320CL Excavator (Prefix GLA) Service Repair Manual (G...ufjskekdjdmw2
The document provides instructions for disassembling a swing drive. Key steps include:
1. Removing retaining rings, gears, bearings, washers, and other internal components from the carrier assembly and housing.
2. Using tools like retaining ring pliers and drivers to remove pins and seals.
3. Pressing out components like the shaft, bearings, and spacer from the housing.
The process involves dismantling the entire swing drive assembly into its individual parts for inspection or replacement of worn components. Cleanliness is emphasized to prevent contamination of parts.
This document provides instructions for removing and installing exhaust manifolds, inlet and exhaust valves, and inlet and exhaust valve springs on Caterpillar 249D compact track loaders. The procedures describe using various tools to compress springs, remove bolts and nuts, and install new gaskets. Safety notices are included to warn technicians to keep parts clean, plug openings, and wear protective equipment when working with compressed springs.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...ufjskekdjdmw2
This document provides instructions for removing and installing the lift cylinder on a 247 Multi Terrain Loader. It lists the required tools and safety precautions. The removal procedure involves releasing hydraulic pressure, disconnecting hoses and removing pins and bolts to detach the cylinder. Reinstallation is the reverse of removal. Torque specifications are provided for reassembly.
This document provides instructions for installing the cylinder head on a 4-cylinder engine:
1. Thoroughly clean the cylinder head and cylinder block mating surfaces.
2. Inspect the cylinder head for distortion and replace if out of specification.
3. Install guide bolts through the cylinder block and install the new cylinder head gasket, ensuring dowel pins are correctly positioned.
This document provides instructions for removing and installing a fuel injection pump on a 246D Skid Steer Loader powered by a C3.3B engine. The procedure involves disconnecting fuel lines, removing mounting nuts and bolts, and carefully withdrawing the pump. New gasket shims and bolts are installed when reinstalling the pump. Cleanliness of all fuel system components is emphasized.
This document provides instructions for servicing components of a 246D Skid Steer Loader powered by a C3.3B engine. It includes procedures for removing and installing the crankshaft rear seal and wear sleeve, flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear. The procedures note required tools and torque specifications and include illustrations showing the components and repair steps. Safety notices are also provided regarding keeping components clean and containing fluids.
This document provides instructions for removing and installing a piston pump on a 246D Skid Steer Loader. It outlines the required tools and gives step-by-step procedures with illustrations. To remove the pump, hoses and harnesses must be disconnected, then lifting tools are used to support the pump while bolts are removed. For installation, the process is reversed. Disassembly of the pump involves removing valves, coils, cartridges and seals. Assembly requires installing these components in reverse order while applying thread lock compound in some areas.
This document provides instructions for removing and installing the automatic timing advance and fuel injection pump housing & governor on a 245D Excavator with a 3406C diesel engine. It describes in detail the steps to take the components off the engine, including removing mounting bolts, nuts, hoses and other fasteners. The instructions note to cap or plug any openings immediately to prevent contamination. They also warn to use caution when removing certain parts like springs.
Caterpillar Cat 245B SERIES II EXCAVATOR (Prefix 6MF) Service Repair Manual (...ufjskekdjdmw2
This document provides instructions for disassembling and assembling starting motors for a 245B Series II excavator. It describes removing components like the rear housing, brush holder, pinion drive housing, and shift lever housing. Tools needed are listed. Detailed photos show each step, such as lifting brush springs, removing retaining rings, and cleaning parts with mineral spirits. Instructions are provided for both 42-MT and 37-MT/41-MT style starting motors.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...ufjskekdjdmw2
This document provides instructions for servicing components of a 245 Excavator engine, including:
- Disassembling and reassembling the fuel injection pump housing, which involves removing pumps, gears, and bearings, and reinstalling them in the proper order and position.
- Removing and installing the inlet manifold, which connects to the cylinder head and air cleaner components.
- Removing the aftercooler unit, which cools engine air after turbocharging, by disconnecting hoses and removing housing covers, elbows, and the core component.
This document provides instructions for disassembling and assembling the swing drive of a 245 Excavator model. It describes removing and installing over 40 individual parts in multiple steps. Key parts that must be removed include the swing drive motor, brake, various oil lines and tubes, bearings, gears, and casing components. Proper cleaning and application of anti-seize compound to specific areas is emphasized. Torque specifications and special tools are referenced throughout the process.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00984196
Fuel Priming Pump - Remove and Install
SMCS - 1258-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/3
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00500957
1. Turn the fuel supply line valve to the OFF position.
2. Remove the bolts and the washers that secure fuel priming pump (1) to base (5). Remove
gasket (4) .
3. Disconnect tube assembly (3) .
4. Remove two bolts (2), the washers and base (5) from the cylinder block.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00500957
2/3
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 1. Install base (5), the washers and two bolts (2) .
2. Connect tube assembly (3) to base (5) .
Note: Check the condition of the gaskets. If the gaskets are worn or damaged, use new parts
for replacement.
3. Install gasket (4). Install fuel priming pump (1) and the bolts that secure the fuel priming
pump to base (5) .
4. Turn the fuel supply line valve to the ON position.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 3 22:34:01 UTC+0800 2019
3/3
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00917143
Fuel Filter Base - Remove and Install
SMCS - 1262-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench Assembly 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
1/3
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00468389
1. Use Tool (A) to remove fuel filter (4) .
2. Disconnect fuel line (1) from fuel filter base (2) .
3. Remove two bolts (3), the washers, fuel filter base (2) and the gasket from the fuel injection
pump housing.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench Assembly 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/3
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 2 g00468389
Note: Check the condition of the gaskets. If the gaskets are worn or damaged, use new parts
for replacement.
1. Install the gasket, fuel filter base (2), the washers and two bolts (3) on the fuel injection
pump housing.
2. Connect fuel line (1) to fuel filter base (2) .
3. Use Tool (A) to install fuel filter (4) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 3 22:34:57 UTC+0800 2019
3/3
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00905874
Fuel Transfer Pump - Remove
SMCS - 1256-011
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/2
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 1 g00462112
1. Turn the fuel supply line valve to the OFF position.
2. Remove tube assembly (2) and tube assembly (4) from fuel transfer pump (3) .
3. Remove bolts (1) and (5) from fuel transfer pump (3). Remove fuel transfer pump (3) and
the O-ring seal.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 3 22:35:52 UTC+0800 2019
2/2
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01003268
Fuel Transfer Pump - Disassemble
SMCS - 1256-015
Disassembly Procedure
Start By:
A. Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 1 g00498289
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
1. Remove bolts (2) and cover (1) from the fuel transfer pump housing.
Illustration 2 g00499040
2. Remove spring (4) from housing (3) .
2/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 3 g00498980
3. Remove O-ring seals (5) and (6) from cover (1) .
4. Remove valve assembly (7) from cover (1) .
Illustration 4 g00498334
5. Remove piston (12) from sleeve (10). Remove washer (15), valve assembly (14) and seal
(13) from piston (12) .
6. Remove sleeve (10) from housing (3). Remove O-ring seal (11) from sleeve (10) .
7. Remove guide and tappet assembly (9) and seal (8) from housing (3) .
3/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 5 g00498367
8. Remove two bolts (16), cover (17) and the seal from housing (3) .
Illustration 6 g00498470
9. Remove valve assembly (18) from housing (3) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 3 22:36:48 UTC+0800 2019
4/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01003269
Fuel Transfer Pump - Assemble
SMCS - 1256-016
Assembly Procedure
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 1 g00498470
1. Install valve assembly (18) in housing (3) .
Illustration 2 g00498687
2. Put clean diesel fuel on seal (16). Install seal (16) on cover (17), as shown. Install the two
bolts that hold cover (17) to housing (3) .
Illustration 3 g00498334
2/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. NOTICE
The tappet and guide assembly must be serviced as a unit.
3. Put clean diesel fuel on seal (8). Install seal (8) on guide and tappet assembly (9). Install
guide and tappet assembly (9) in housing (3) .
4. Put clean diesel fuel on O-ring seal (11). Put O-ring seal (11) in position on sleeve (10).
Install sleeve (10) in housing (3) .
5. Install piston (12) in sleeve (10) .
6. Put clean diesel fuel on seal (13). Put seal (13), valve assembly (14) and washer (15) in
position in piston (12) .
Illustration 4 g00498980
7. Put clean diesel fuel on O-ring seals (5) and (6). Install O-ring seals (5) and (6) in cover (1).
Install valve assembly (7) in cover (1) .
3/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. Illustration 5 g00499040
8. Install spring (4) in housing (3) .
Illustration 6 g00498289
9. Put cover (1) in position on the housing and install bolts (2) that hold the cover in position.
End By: Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump
- Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 3 22:37:44 UTC+0800 2019
4/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00906240
Fuel Transfer Pump - Install
SMCS - 1256-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00462112
1. Install the O-ring seal and fuel transfer pump (3). Install bolts (1) and (5) .
2. Install tube assembly (2) and tube assembly (4) .
1/2
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. 3. Turn the fuel supply line valve to the ON position.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 3 22:38:40 UTC+0800 2019
2/2
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00880175
Fuel Injection Lines - Remove and Install
SMCS - 1252-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/5
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 1 g00448807
1. Remove three bolts (1), (2) and (3) and the brackets from the fuel injection lines.
Illustration 2 g00448808
2. Disconnect six fuel injection line nuts (4) from the fuel injection pumps.
NOTICE
Do not allow the tops of the nozzles to turn while the fuel lines are
loosened. The nozzles will be damaged if the top of the nozzle turns in
the body. Defective fuel nozzles will damage the engine due to incorrect
spray patterns.
2/5
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...