Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
2. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 249D COMPACT TRACK LOADER GWR
Configuration: 249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Engine
Disassembly and Assembly
C2.2 Engines for Caterpillar Built Machines
Media Number -UENR4528-01 Publication Date -01/09/2015 Date Updated -23/01/2018
i06586916
Rocker Shaft and Pushrod - Install
SMCS - 1102-012; 1208-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 228-3610 Feeler Gauge 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Ensure that all components are clean and free from wear or damage. Refer to Specifications,
"Rocker Shaft" for more information. Replace any components that are worn or damaged.
1/4
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g03799789
2. Install a new seal (8) to rocker shaft assembly (2). Ensure that the seal is correctly installed
into the recess of the rocker shaft assembly.
2/4
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 2 g03799770
3. Apply clean lubricating oil to both ends of pushrods (6). Install the pushrods to the engine
with the cup upward. Ensure that the pushrods are installed correctly in the socket of the
valve lifters.
Note: If the pushrods have been used, ensure that the pushrods are installed in original
positions.
4. Lubricate the top of the valve stems with clean engine oil. Install caps (7) to the valve
stems.
Note: If the caps have been used, ensure that the caps are installed in original positions.
5. Install rocker shaft assembly (2) to the cylinder head.
Note: Ensure that the ends of adjustment screws (3) are correctly seated in ends of pushrods
(6).
3/4
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 6. Install nuts (4) finger tight.
7. Use a deep socket to tighten nuts (4) evenly hand tight. Starting at the center of the rocker
shaft and work outward.
8. Install bolt (1) and nut (5) hand tight.
9. Tighten nuts (4) to a torque of 33 N·m (292 lb in).
10. Tighten bolt (1) and nut (2) to a torque of 10 N·m (89 lb in).
11. Adjust the valve lash. Refer to Systems Operation, Testing and Adjusting, "Engine Valve
Lash - Inspect/Adjust" for the correct procedure.
Note: Tooling (A) will be required when checking or adjusting the valve lash.
End By:
a. Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism
Cover - Remove and Install" for the correct procedure.
b. Install the engine oil line. Refer to Disassembly and Assembly, "Engine Oil Line- Remove
and Install" for the correct procedure.
c. Install the fuel injectors. Refer to Disassembly and Assembly, "Fuel Injector - Remove and
Install" for the correct procedure.
d. Install the turbocharger oil feed pipe. Refer to Disassembly and Assembly, "Turbocharger -
Install" for the correct procedure.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Nov 17 23:23:58 UTC+0800 2019
4/4
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 249D COMPACT TRACK LOADER GWR
Configuration: 249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Engine
Disassembly and Assembly
C2.2 Engines for Caterpillar Built Machines
Media Number -UENR4528-01 Publication Date -01/09/2015 Date Updated -23/01/2018
i06844080
Cylinder Head - Remove - 4 Cylinder Engines
SMCS - 1100-011
Removal Procedure
Start By:
a. Remove the exhaust manifold. Refer to Disassembly and Assembly, "Exhaust Manifold -
Remove and Install" for the correct procedure.
b. Remove the fuel injectors. Refer to Disassembly and Assembly, "Fuel Injector - Remove"
for the correct procedure.
c. Remove the glow plugs. Refer to Disassembly and Assembly, "Glow Plugs- Remove and
Install" for the correct procedure.
d. Remove the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker
Shaft and Pushrod - Remove" for the correct procedure.
e. Remove the water temperature regulator housing. Refer to Disassembly and Assembly,
"Water Temperature Regulator Housing - Remove and Install" for the correct procedure.
f. Remove the fuel manifold. Refer to Disassembly and Assembly, "Fuel Manifold (Rail) -
Remove and Install" for the correct procedure.
g. Remove the inlet manifold. Refer to Disassembly and Assembly, "Inlet Manifold - Remove
and Install" for the correct procedure.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
1. Drain the coolant from the cooling system into a suitable container for storage or for
disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Drain"
for the correct draining procedure.
Illustration 1 g03865389
2/5
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 2 g03865399
Illustration 3 g03337990
The cylinder head tightening sequence for four cylinder engines
2. Loosen hose clamp (2) and disconnect hose (1) from outlet (3).
3/5
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 3. Gradually loosen bolts (4) in reverse numerical order. Loosening the bolts in reverse
numerical order will prevent distortion of the cylinder head.
Loosen the cylinder head bolts in the reverse order to the sequence that is shown in
Illustration 3.
4. Remove bolts (4) from cylinder head (5).
5. Attach a suitable lifting device to cylinder head (5). The weight of the cylinder head is
approximately 30 kg (66 lb). Carefully lift the cylinder head off the cylinder block.
Note: Do not use a lever to separate the cylinder head from the cylinder block. Take care
not to damage the machined surfaces of the cylinder head during the removal procedure.
Avoid contamination of the cylinder bores with coolant or with debris.
NOTICE
Place the cylinder head on a surface that will not scratch the face of the
cylinder head.
6. Remove cylinder head gasket (6).
Note: The original cylinder head gasket should be retained for identification purpose.
Gaskets of different thickness are available. Refer to Specifications, "Cylinder Head" for the
correct information.
4/5
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 4 g03800372
Typical example
7. Note the position of dowels (7) in the cylinder block. Do not remove the dowels unless the
dowels are damaged.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Nov 17 23:24:53 UTC+0800 2019
5/5
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 249D COMPACT TRACK LOADER GWR
Configuration: 249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Engine
Disassembly and Assembly
C2.2 Engines for Caterpillar Built Machines
Media Number -UENR4528-01 Publication Date -01/09/2015 Date Updated -23/01/2018
i06844145
Cylinder Head - Install - 4 Cylinder Engines
SMCS - 1100-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Table 1
Required Tools
Tool Part Number Part Description Qty
A -
Guide Bolt
(M11 by 100 mm)
2
B 8T-3052 Degree Wheel 1
1. Thoroughly clean the gasket surfaces of the cylinder head and the cylinder block. Do not
damage the gasket surfaces of the cylinder head or the cylinder block. Ensure that no debris
enters the cylinder bores, the coolant passages, or the lubricant passages.
2. Inspect the gasket surface of the cylinder head for distortion. Refer to Specifications,
"Cylinder Head" for more information. If the gasket surface of the cylinder head is distorted
beyond maximum permitted limits, replace the cylinder head.
1/6
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 1 g03800437
Illustration 2 g06085793
Typical example
3. Inspect dowels (7) for damage. If necessary, replace the dowels in the cylinder block.
4. Install Tooling (A) to the cylinder block. Refer to Illustration 1.
2/6
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Note: During the following procedure, a new cylinder head gasket thickness must be
calculated if the crankshaft, a connecting rod, or a piston has been replaced. Refer to
Systems Operation, Testing, and Adjusting, Piston Height - Inspect.
Note: During the following procedure, if the crankshaft, a connecting rod or a piston has not
been replaced, obtain a new cylinder head gasket of the same part number as the gasket that
was removed. The part number of the cylinder head gasket is marked at position (X).
5. Align cylinder head gasket (4) with Tooling (A) and with dowels (3). Install the cylinder
head gasket onto the cylinder block.
Illustration 3 g03865408
6. Use a suitable lifting device to lift cylinder head (5). The weight of the cylinder head is
approximately 30 kg (66 lb).
7. Use Tooling (A) to align the cylinder head with the cylinder block. Install the cylinder head
to the cylinder block.
Note: Ensure that the cylinder head is correctly positioned onto the dowels.
8. Remove Tooling (A).
9. Install new bolts (4) to the cylinder head.
3/6
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 4 g03337990
The cylinder head tightening sequence for four cylinder engines
10. Tighten bolts (4) to a torque of 50 N·m (36 lb ft). Use the numerical sequence that is shown
in Illustration 4
Illustration 5 g03800587
4/6
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 11. Use Tooling (B) to turn the bolts through an additional 150 degrees in the numerical
sequence as shown in 5.
Illustration 6 g03865410
12. Position clamp (2) onto hose (1). Connect the hose to outlet (3). Tighten the hose clamp
securely.
End By:
a. Install the water temperature regulator to the cylinder head. Refer to Disassembly and
Assembly, "Water Temperature Regulator - Remove and Install" for the correct procedure.
b. Install the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker
Shaft and Pushrod - Install" for the correct procedure.
c. Install the glow plugs. Refer to Disassembly and Assembly, "Glow Plugs - Remove and
Install" for the correct procedure.
d. Install the fuel manifold. Refer to Disassembly and Assembly, "Fuel Manifold (Rail) -
Remove and Install" for the correct procedure.
e. Install the fuel injectors. Refer to Disassembly and Assembly, "Fuel Injector - Install" for
the correct procedure.
f. Install the inlet manifold. Refer to Disassembly and Assembly, "Inlet Manifold - Remove
and Install" for the correct procedure.
5/6
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. g. Install the exhaust manifold. Refer to Disassembly and Assembly, "Exhaust Manifold -
Remove and Install" for the correct procedure.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Nov 17 23:25:49 UTC+0800 2019
6/6
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 249D COMPACT TRACK LOADER GWR
Configuration: 249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Engine
Disassembly and Assembly
C2.2 Engines for Caterpillar Built Machines
Media Number -UENR4528-01 Publication Date -01/09/2015 Date Updated -23/01/2018
i06101794
Lifter Group - Remove and Install
SMCS - 1209-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7262 Telescopic Magnet 1
Start By:
a. Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove"
for the correct procedure.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/4
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03341243
1. Use Tooling (A) to remove lifter (1) from the cylinder block.
Note: Make a temporary identification mark on each lifter in order to identify the correct
location.
2. Repeat Step 1 for the remaining lifters.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/4
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. NOTICE
It is strongly recommended that all lifters should be replaced when a
new camshaft is installed.
Illustration 2 g03341244
1. Clean lifters (1). Follow Step 1.a through Step 1.c in order to inspect the lifters. Replace
lifters that are worn or damaged.
a. Inspect the seat of the pushrod in the lifter for visual wear or damage. Ensure that oil
holes in the lifter are not restricted.
b. Inspect the shank of the lifter for wear or damage. Refer to Specifications, "Lifter
Group" for more information.
c. Inspect the face of the lifter that runs on the camshaft for visual wear or damage.
2. Lubricate lifters (1) with clean engine oil.
3. Install lifters (1) into the cylinder block.
Note: The lifters should be free to rotate. If the lifters have been used, ensure that the lifters
are installed in the original positions.
3/4
249D Compact Track Loader GWR00001-UP (MACHINE) POWERED BY C2.2 Eng...
2019/11/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...