- The document provides technical specifications for various welding machines and hand tools from Leister for welding geomembrane liners, including wedge welders, hot air welders, and combination welders.
- The machines and tools allow for welding of various materials like PE, PVC, and PP in thicknesses ranging from 0.5mm to 5mm and come in sizes suitable for both civil engineering and tunnel construction applications.
- Key features highlighted include digital control and display of welding parameters, adjustable welding pressure and speed, and optional data recording for quality control.
Flow measurement for dry bulk solids MaxxFlowTiago Morais
MaxxFlow HTC
Fall through measurement
of high mass flow rates
For measurement of high mass flow rates for dry solids from the exit of pre feeding devices,
e. g. screw conveyors, air slides, rotary valves, bucket elevators, etc.
● Most non-metallic solids can be measured
● Can be installed on round pipes or ducts
● No real upper limit of mass flow
● Maximum pressure 10 bar
● Dust tight
● No flow restrictions to the process flow (wear resistant ceramic liner)
● The mass flow measurement is independent of flow characteristics
● Maximum temperature, 12O °C
● Can be installed at an angle
● Small footprint, 220 mm (DN 100), 290 mm (DN 150), 310 mm (DN 200)
● No moving parts, hence no maintenance
The MaxxFlow HTC is specially developed for the flow measurement of dry bulk solids during high-volume throughput. Due to its completely open profile and its low installation height, the MaxxFlow HTC is especially suitable in situation in which it was previously only possible to use complicated or expensive mechanical solutions, e. g. impact plates or measuring chutes.
The installation of the MaxxFlow HTC takes place independently of the direction of the line (vertical/inclined), but always after mechanical conveyor elements,
e. g. rotary feeder, screw conveyors, air slides or chain conveyors.
After the conveyor, the material to be measured falls or slides through an inlet path and runs through the sensor. During the throughput, the MaxxFlow HTC records the material type and speed. Since the material falls from a constant height after emerging from the conveyor element, the speed of the product stream is accelerated, but is constant at the installation position of the sensor.
Due to this constant speed, the speed measurement does not need to be activated in every case, but can be calculated as a constant depending on the height of the fall. The mass flow is determined as follows:
Q (kg/s) = K (kg/m3) x v (m/s) x A (m2)
Through the input coupling of a high-frequency, electro-magnetic alternating field, a homogenous measuring field is generated in the measuring tube.
The measuring tube (interior tube of the sensor) consists of wear-resistant Al2O3 ceramics. Dry bulk solids inside the measuring field reduce the amplitude of the alternating field.
This leads to a measuring signal that is in proportion to the concentration of the dry bulk solids in the sensor (kg/m3).
If the material speed varies, for example due to a change in initial speed, then this can also be measured.
This takes place through a runtime measurement with the help of two additional electrodes behind the interior ceramics tube.
AKBAR TRADING EST| Thomas & Betts Cable Tie TyrapAKBAR TRADING
1.1
8
Premium cable ties with steel locking barb
Characteristics
The single most distinguishing feature of the Ty-Rap
®
cable ties
from Thomas & Betts is the stainless steel locking barb, firmly
anchored inside the tie head (Fig. 1).
It is made from corrosion-proof, antimagnetic steel (Marine
Grade Type 316).
This guarantees a strong and durable locking of the tie even
under the most adverse conditions - humidity, heat, cold, etc.
and is also proof against vibration and external shock.
When applying ties with Thomas & Betts tooling, the excess
end of the tie is automatically cut off and the slight over cut
retracts into the tie, so that there is no risk of injury from
protruding sharp edges. (Fig. 3)
The low-profile design of the head allows secure tying in tight
spaces.
The edges of the head are also rounded off to offer maximum
protection from injury.
The transition from the strap to the head is gradual. This
protects the material against breaking at this most critical
point.
Flow measurement for dry bulk solids MaxxFlowTiago Morais
MaxxFlow HTC
Fall through measurement
of high mass flow rates
For measurement of high mass flow rates for dry solids from the exit of pre feeding devices,
e. g. screw conveyors, air slides, rotary valves, bucket elevators, etc.
● Most non-metallic solids can be measured
● Can be installed on round pipes or ducts
● No real upper limit of mass flow
● Maximum pressure 10 bar
● Dust tight
● No flow restrictions to the process flow (wear resistant ceramic liner)
● The mass flow measurement is independent of flow characteristics
● Maximum temperature, 12O °C
● Can be installed at an angle
● Small footprint, 220 mm (DN 100), 290 mm (DN 150), 310 mm (DN 200)
● No moving parts, hence no maintenance
The MaxxFlow HTC is specially developed for the flow measurement of dry bulk solids during high-volume throughput. Due to its completely open profile and its low installation height, the MaxxFlow HTC is especially suitable in situation in which it was previously only possible to use complicated or expensive mechanical solutions, e. g. impact plates or measuring chutes.
The installation of the MaxxFlow HTC takes place independently of the direction of the line (vertical/inclined), but always after mechanical conveyor elements,
e. g. rotary feeder, screw conveyors, air slides or chain conveyors.
After the conveyor, the material to be measured falls or slides through an inlet path and runs through the sensor. During the throughput, the MaxxFlow HTC records the material type and speed. Since the material falls from a constant height after emerging from the conveyor element, the speed of the product stream is accelerated, but is constant at the installation position of the sensor.
Due to this constant speed, the speed measurement does not need to be activated in every case, but can be calculated as a constant depending on the height of the fall. The mass flow is determined as follows:
Q (kg/s) = K (kg/m3) x v (m/s) x A (m2)
Through the input coupling of a high-frequency, electro-magnetic alternating field, a homogenous measuring field is generated in the measuring tube.
The measuring tube (interior tube of the sensor) consists of wear-resistant Al2O3 ceramics. Dry bulk solids inside the measuring field reduce the amplitude of the alternating field.
This leads to a measuring signal that is in proportion to the concentration of the dry bulk solids in the sensor (kg/m3).
If the material speed varies, for example due to a change in initial speed, then this can also be measured.
This takes place through a runtime measurement with the help of two additional electrodes behind the interior ceramics tube.
AKBAR TRADING EST| Thomas & Betts Cable Tie TyrapAKBAR TRADING
1.1
8
Premium cable ties with steel locking barb
Characteristics
The single most distinguishing feature of the Ty-Rap
®
cable ties
from Thomas & Betts is the stainless steel locking barb, firmly
anchored inside the tie head (Fig. 1).
It is made from corrosion-proof, antimagnetic steel (Marine
Grade Type 316).
This guarantees a strong and durable locking of the tie even
under the most adverse conditions - humidity, heat, cold, etc.
and is also proof against vibration and external shock.
When applying ties with Thomas & Betts tooling, the excess
end of the tie is automatically cut off and the slight over cut
retracts into the tie, so that there is no risk of injury from
protruding sharp edges. (Fig. 3)
The low-profile design of the head allows secure tying in tight
spaces.
The edges of the head are also rounded off to offer maximum
protection from injury.
The transition from the strap to the head is gradual. This
protects the material against breaking at this most critical
point.
Howell Machines are one of the leading organizations engaged in manufacturing, exporting and supplying a variety of Wood Working Machines and Safety And Security Systems. Our range of products includes Roller Pressing Machine, Instant Pressing System, Instant Lamination Pressing Machine, Lamination Roller Press, Heating Chamber,cnc machines,indias first one tonn bricketting machine,pvc pre-heating tables,membrane press and other allied products.
The Canon varioPRINT 140 series offers unparalleled reliability, impressive quality, green credentials and excellent output speeds, setting a new standard for monochrome production printing. Learn more: http://www.canon-europe.com/business-printers-and-faxes/varioprint-140/
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HTE (...Creativity Please
This product is of the type Electron Beam Welded, which is a type of Current Sense Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hte/
This product is a type of Silicone Coated Resistors, which is a type of Wire Wound Resistors. Features of this product are: UL approved flame retardant coating, Radial terminals for Amp 187 & Amp 250 connectors available, Choice of anti-rust stainless steel terminations. This products is consumable for High power dissipation and impulse handling capability, High voltage bleeder resistor in power supplies, Load Bank Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hir/
Focus on SMT machine manufacturing&offering comprehensive solution in bulk LED assemble.Provide high quality replacement parts.Machine installation,repair,maintenance,Pre-sales and after sales service.
Howell Machines are one of the leading organizations engaged in manufacturing, exporting and supplying a variety of Wood Working Machines and Safety And Security Systems. Our range of products includes Roller Pressing Machine, Instant Pressing System, Instant Lamination Pressing Machine, Lamination Roller Press, Heating Chamber,cnc machines,indias first one tonn bricketting machine,pvc pre-heating tables,membrane press and other allied products.
The Canon varioPRINT 140 series offers unparalleled reliability, impressive quality, green credentials and excellent output speeds, setting a new standard for monochrome production printing. Learn more: http://www.canon-europe.com/business-printers-and-faxes/varioprint-140/
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HTE (...Creativity Please
This product is of the type Electron Beam Welded, which is a type of Current Sense Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hte/
This product is a type of Silicone Coated Resistors, which is a type of Wire Wound Resistors. Features of this product are: UL approved flame retardant coating, Radial terminals for Amp 187 & Amp 250 connectors available, Choice of anti-rust stainless steel terminations. This products is consumable for High power dissipation and impulse handling capability, High voltage bleeder resistor in power supplies, Load Bank Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hir/
Focus on SMT machine manufacturing&offering comprehensive solution in bulk LED assemble.Provide high quality replacement parts.Machine installation,repair,maintenance,Pre-sales and after sales service.
Machine range: We are a one-stop SMT solution company, providing all SMT production, inspection and rework machines, spare-parts, consumables etc. All main-line manufacturing production equipment like wave solder, reflow ovens, printers, p&p, PCB conveyors/handling, AOI, SPI, Conformal coating, dispensing, selective soldering, PCBA cleaner etc. Replacement parts like conveyor fingers for different wave solder systems, p&p feeders and nozzles etc, consumable material like glues, solder wire etc. This will save customers a significant amount of time. Three different suppliers for one single item would be compared, as opposed to capitalizing on the mass investigation into the market completed before we present our machines and recommend to our customers.50% cost saving for your current purchasing .If you have any need.please feel free to contact me .email:shaoyong@smthelp.com whatsapp:+86 13760481664 Skype:sy332366
The company was incorporated with the dream of serving excellence with perfection. The company has gained the strong clientele with long term relationship of service. Today, the company is well - known for the quality services with expected quality
The PET bottles are often transported by stacking them upon each other. This might cause the bottle in
the bottom row to buckle, compress and deform. The manufacturers need to test the amount of load that
the bottles can bear when they are put under compressive forces. The Top Load Tester- Digital is the
instrument that gives an exact test result for the buckling capacity of the bottles or PET containers.
Paper and Packaging Testing Instruments - Pacorr offers a wide range of highly accurate Paper and Packaging Testing Instruments that help the industries in testing the quality of their products. Call now for price: +91 8882149230
Paper and Packaging Testing Instruments - Pacorr offers a wide range of highly accurate Paper and Packaging Testing Instruments that help the industries in testing the quality of their products. Call now for price: +91 8882149230
The Bursting Strength Tester- Digital is the instrument that is mainly used in paper and packaging industries as well as the textile industries for ensuring the best quality of the packaging materials like leather, fabric, paper and corrugated sheets.
Southern machinery board handling system catalog 2018 01Ming Gan
- Focus on AI SMT Machine & PCB auto Assembly.
- Offering comprehensive solution in Through Hole Technology for Radial component inserter, Axial component inserter, Bulk LED, Odd form component inserter & Eyelet/Pin Inserter.
- Provide High Quality Replacement Parts for SMT Pick & Place Equipment and Auto Insertion Machine: Vacuum Nozzles, Cutter Blades, Glue Dispense Nozzles, Feeder Accessories, Vacuum Pumps and Accessories, Filters, Springs, Lamps, Belts, and more!
- Provide full training for AI SMT processing, machine installation,repair,maintenance,upgrade.
- Provide pre-sales and after sales service.
(contact me :ming@smthelp.com
http://www.smthelp.com/)
KOMEG Technology Industrial is famous for its KOMEG star brand of environmental test equipment in China since 1990. KOMEG has specialized in climatic test chambers, thermal shock test chambers, walk-in chambers, burn-in room and aging test chambers, drying ovens, salt spray testers, medical laboratory equipment etc.
For more info, please visit:http://www.komegtech.com
please contact: fiona@komegtech.com
Omnigrad m tr10 endress+hauser datasheet-modular rtd assembly temperatureENVIMART
Omnigrad m tr10 endress+hauser datasheet-modular rtd assembly temperature - Endress+Hauser - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Looking for high-quality jewelry casting machines? Browse our selection of top-rated jewelry casting machines, designed to deliver precise and consistent results. From small bench-top machines to vacuum casting machines, we have everything you need to take your jewelry-production to the next level. Inquire now and discover the perfect jewelry casting machine for your needs.
Looking for high-quality jewelry casting machines? Browse our selection of top-rated jewelry casting machines, designed to deliver precise and consistent results. From small bench-top machines to vacuum casting machines, we have everything you need to take your jewelry-production to the next level. Inquire now and discover the perfect jewelry casting machine for your needs.
Looking for high-quality jewelry casting machines? Browse our selection of top-rated jewelry casting machines, designed to deliver precise and consistent results. From small bench-top machines to vacuum casting machines, we have everything you need to take your jewelry-production to the next level. Inquire now and discover the perfect jewelry casting machine for your needs.
Looking for high-quality jewelry casting machines? Browse our selection of top-rated jewelry casting machines, designed to deliver precise and consistent results. From small bench-top machines to vacuum casting machines, we have everything you need to take your jewelry-production to the next level. Inquire now and discover the perfect jewelry casting machine for your needs.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
1. ®
Civil Engineering and Tunnel Construction
• Worldwide the smallest and lightest compact
machine without control box
• High welding capacity thanks to special wedge with
optimum heat transfer
• Fully developed drive technology for heavy loading
• Digital display of temperature, pressure and speed
• Optional memory card for data recording
COMET
Type COMET
Voltage V~ 120, 230
Frequency Hz 50/60
Temperature °C max. 420 steplessly controlled
Welding pressure N max. 1000 steplessly adjustable
Drive m/min. 0.8–3.2 steplessly controlled
Memory card optional
Size L×W×H mm 285 × 230 × 230
Weight kg 7.5
Technical Data
COMET wedge welding machine used for welding
geomembrane liners in a landfill.
Wedge welder, combiwedge machines and hand tools from LEISTER for welding and
prefabrication of geomembrane liners for civil engineering and tunnel construction.
Materials: PE-HD, PE-LD, PE-C, PVC-P, PP, PFA, ECB, EVA,TPO
Approval mark:
Wedge Welding Machines
Power consumption 1500W
Wedge
70 mm
Copper
70 mm
Steel
Type of Material
PE-HD, PE-C, PP
PE-LD
PVC-P
1.5 – 2.0 mm
2.0 – 3.0 mm
2.0 – 3.0 mm
Thickness
Recommended
Power consumption 1200W
Wedge
50 mm
Copper
50 mm
Steel
Type of Material
PE-HD, PE-C, PP
PE-LD
PVC-P
0.5 – 1.5 mm
1.0 – 2.0 mm
1.0 – 2.0 mm
Thickness
Recommended
Power consumption 700W
Wedge
20 mm
Steel
Type of Material
PE-HD, PVC-P,
PE-LD
0.5 – 1.0 mm
Thickness
Recommended
2. ®
2
ASTRO COSMO
Type ASTRO
Digital display of temperature, speed and voltage
Voltage V~ 120, 230
Power consumption W 1800
Frequency Hz 50 /60
Temperature °C max. 420 steplessly controlled
Welding pressure N max. 1500 steplessly adjustable
Drive m/min. 0.5– 5.0 steplessly controlled
Overlap width mm max. 180
Material thickness mm 1.5 – 3.0
Size L×W×H mm 430× 270× 310
Weight kg 23
Technical Data
Type COSMO
Digital display of temperature and speed
Voltage V~ 230
Power consumption W 2000
Frequency Hz 50 /60
Temperature °C max. 420 steplessly controlled
Welding pressure N max. 1500 steplessly adjustable
Drive m/min. 0.5–5.0 steplessly controlled
Overlap width mm max. 180
Material thickness mm 1.5 – 3.0
Size L×W×H mm 600 × 380 × 450
Weight kg 32.0
Approval mark:
Type COSMO with process control and recording
Digital display of temperature, pressure,
speed and seam thickness reduction.
Voltage V~ 230
Power consumption W 2000
Frequency Hz 50/60
Temperature °C max. 450 steplessly controlled
Welding pressure N max. 2500 steplessly adjustable
Drive m/min. 0.5 –5.0 steplessly controlled
Overlap width mm max. 180
Material thickness mm 1.5 – 3.0
Recording Memory card or printer
Size L×W×H mm 600 × 380 × 450
Weight kg 32.0
Approval mark:
Technical Data
ASTRO hot-wedge welder achieves perfect welding seams
with highest welding speed (up to 5 m/min.)
COSMO wedge welder being used to weld a 2.5 mm
PE-HD geomembrane liner.
• Highest welding speed with best quality
• Welding pressure steeplessly adjustable
• Designed for field application
• One hand - two functions
¯
®®NEW
3. ®
3
TWINNY T TWINNY S
Type TWINNY T
Voltage V~ 100, 120, 200, 230
Power consumption W 1600, 1900, 2200, 2300
Frequency Hz 50/ 60
Temperature °C max. 560 steplessly
Welding pressure N max. 1000 steplessly
Drive m/min. 0.8– 3.2 steplessly
Air flow l/min. Step 2: 150
Step 3: 190
Air pressure stat. Pa Step 2: 1500 (15 mbar)
Step 3: 2100 (21 mbar)
Emission level LpA (dB) 71
Memory card optional
Size L×W×H mm 340 × 340 × 270
Weight kg 7.9 civil engineering
6.9 tunnel construction
Approval mark:
Technical Data
TWINNY T with test channel welding 1.5 mm PE-HD
liners in a landfill.
TWINNY S with combi-wedge short welding in a tunnel.
Tunnel construction
– Guide handle and travelling wheels
Civil Engineering
– Guide handle, travelling wheel
Prefabrication model on request
Combiwedge – Welding machines
Welding speed
2 – 3.5 m/min. depending on formulati-
on and thickness of the geomembrane
liner as well as ambient temperature.
Welding pressure (recommended)
PVC-P, ECB 300 – 500 N
PE-HD, PP 600 – 1000 N
Short Combiwedge
for material thickness of 0.3
mm or more for thin and
flexible films. With or with-
out test channel
Long Combiwedge
for material thickness of 0.8
mm or more for films and
geomembrane liners. With
or without test channel
Type TWINNY S
Voltage V~ 100, 120, 200, 230
Power consumption W 1600, 1900, 2200, 2300/2900
Frequency Hz 50/ 60
Temperature °C max. 600 steplessly
Welding pressure N max. 1000 / max. 500
Drive m/min. 0.2– 2.5 / 0.8– 4
Air flow l/min. Step 2: 150
Step 3: 190
Air pressure stat. Pa Step 2: 1500 (15 mbar)
Step 3: 2100 (21 mbar)
Emission level LpA (dB) 71
Size L×W×H mm 350 × 390 × 270
Weight kg 6.9 civil engineering
6.5 tunnel construction
Approval mark: CCA certified
Technical Data
• High-tech version
• Display of welding parameters
4. ®
4
TWINMAT
Type TWINMAT
Digital display of temperature and speed
Voltage V~ 230, 400
Power consumption W 4600, 5800
Frequency Hz 50 / 60
Temperature °C 20 – 600 steplessly controlled
Air flow l/min. max. 500
Drive m/min. 0.5 – 5.0 steplessly controlled
Overlap width mm max. 180
Material thickness mm 1.5 – 5.0
Welding pressure N max. 2500 steplessly adjustable
Operating temperature °C –5 to 45
Air pressure stat. Pa 5000 (50 mbar)
Size L×W×H mm 600 × 690 × 450
Weight kg 32.0
Approval mark: CCA certified
Type TWINMAT with process control and recording
Digital display of temperature, pressure,
speed and seam thickness reduction
Voltage V~ 230, 400
Power consumption W 4600, 5800
Frequency Hz 50 / 60
Temperature °C 20 – 620 steplessly controlled
Air flow l/min. max. 500
Drive m/min. 0.5 – 5.0 steplessly controlled
Overlap width mm max. 180
Material thickness mm 1.5 – 5.0
Welding pressure N max. 2500 steplessly adjustable
Operating temperature °C –5 to 45
Air pressure stat. Pa 5000 (50 mbar)
Recording Memory card or printer
Size L×W×H mm 600 × 690 × 450
Weight kg 32.0
Approval mark: CCA certified
Technical Data
TWINMAT combi-wedge welding machine achieves
perfect welding seams even in humid conditions.
WELDMAX
WELDMAX handextruder being used to repair a
PE-HD geomembrane.
Type WELDMAX
Voltage V~ 120, 200, 230
Power consumption W 1800, 2200, 2200
Frequency Hz 50/60
Air-Temperature °C max. 400, steplessly controlled
Air flow l/min 300
Plasticizer-Temperature °C 270, steplessly controlled
Output kg/h 0.7
Welding rod mm ø 4 ± 0.2 (according to DVS 2211)
Size mm 443 × 94 × 255, handle ø 57
Weight kg 3.8
Approval mark: CCA certified
Technical Data
• Compact hand extruder with integrated hot air
blower, plasticizer unit, electronic control and
feeder for welding rod in one housing
• Steepless temperature controls for plasticiser
unit and preheated air
• Universal extruder for PE-HD, PP and PPS with-
out change-over
• Continuous and stepless feeding of welding rod
• High efficiency, no multiple welding
Mini-Handextruder
5. ®
5
Hand welding tools
TRIAC PID
The welding tool for quality assurance
TRIAC S
The reliable hot air tool
Type TRIAC PID
Voltage V~ 42, 100, 120, 200, 230
Power consumption W 1000,1400,1600,1400,1600
Frequency Hz 50/60
Temperature °C 50 – 600, steplessly controlled
Air flow l/min. max. 230
Pressure stat. Pa ca. 3000 (30 mbar),
after 24 h operating time
Emission level LpA (dB) 65
Size mm 100 × 340, handle ø 56
Weight kg 1.4 with 3 m cord
Approval mark: CCA certified
Technical Data
Type TRIAC S
Voltage V~ 42, 100, 120, 200, 230
Power consumption W 1000, 1400, 1600, 1400, 1600
Frequency Hz 50/60
Temperature °C 20 – 700, steplessly controlled
Air flow l/min. max. 230
Pressure stat. Pa ca. 3000 (30 mbar),
after 24 h operating time
Emission level LpA (dB) 65
Size mm 100 × 330, handle ø 56
Weight kg 1.3 with 3m cord
Approval mark: CCA certified
Technical Data
TRIAC PID overlap welding a PE-LD geomembrane. TRIAC S with wide slot nozzle and pressure roller during
the tacking process, before extrusion welding.
• Reproducible welding thanks to light weight and
smaller diameter handle
• Stepless electronic temperature control, therefore
independent of voltage fluctuations and varying
ambient temperature (PID control)
• Effortless welding seams thanks to digital temperature
display of SET and ACTUAL value
• Adaptor tube with heat protection
• Electronic heating element protection and
automatic shut-off of the motor at minimal
carbon level
• Multiple replace of carbon brushes possible,
therefore suitable for continuous operation
6. ®
6
EXAMO
For shearing, peeling and tensile tests
Technical Data
Type EXAMO 300 F EXAMO 600F
Power consumption V~ 120, 230 120, 230
Current W 200 200
Max. tensile load N 4000 3000
Load messure range N 0 – 4000 0 – 3000
Min. jaw spacing mm 5 5
Max. jaw spacing mm 300 600
Max. Range mm 300 600
Testing speed mm/min. 10 – 300 10 – 300
Max. sample thickness mm 7 7
Max. sample width mm 40 (60 optional) 40 (60 optional)
Memory-Card optional optional
Dimension of
storage case L×W×H mm 750 × 270 × 190 1050 × 270 × 190
Weight kg 14 17.5
Digital display – Max. tensile load, FPeak
– Elongation % at FPeak
–Tearing force, FTear
– Elongation % at FTear
–Test speed
– Position
Approval mark:
Tensiometer
Type MINOR
Air supply for max. one Diode PID/Diode S
Voltage V~ 42, 120, 230
Power consumption W 100, 100, 100
Frequency Hz 50/60
Air flow l/min. 400
Pressure stat. Pa 4000, (40 mbar), 50/60 Hz
Emission level LpA(dB) 67
Size mm 250 × 95, handle ø 64
Weight kg 1.15 with cord
Approval mark:
Type DIODE PID / DIODE S
Voltage V~ 42, 100, 120, 230
Power consumption W 900, 1400, 1600, 1600
Frequency Hz 50/60
Temperature °C 20 – 600, steplessly controlled (Diode PID)
steplessly adjustable (Diode S)
Air flow l/min. min. 40
Air pressure Pa max. 105
(1000 mbar)
Size mm 265 × 57, handle ø 40
Weight g 425, 1150, with 3 m cord and
3 m air hose
Approval mark: CCA certified
Technical Data
DIODE PID with MINOR blower
The perfect combination
DIODE PID and MINOR
overlap welding a PVC
membrane in a tunnel.
• handy, robust and light
• designed for field application
• digital display of process values
• Geotextile version available
7. ®
7
LEISTER is the only tool manufacturer to offer all possible types of welding systems worldwide!
Welding
system
Description Tool Diagram
Hot Wedge
Energy transfer
through surface
contact
Automatic machine
Energy transfer
through surface
contact and hot air
Automatic machine
Contactless energy
transfer
Hand tool
Surface welding joint Hand tool
Advantages
Higher welding speed
Preheating, drying and
cleaning of base material
enhanced welding quality
through limited stress
cracking
Gentle temperature transfer
No multiple welding
Combination
hot air with
wedge
(Combi-
wedge)
Hot Air
Extrusion
Hot wedge welding
Hot air welding
Combiwedge welding
Drive/Pressure
roller
Overlapp welding
Overlapp welding
Upper liner
Hot wedge
Lower liner
Liner
Guide roller
Welding direction
Welding direction
Hot air
Liner
Hot air
Welding direction
Plasticizing unit
Welding shoe
Extrudate
Hot air nozzle
Blower
Heating element
Pressure roller
Drive/
Pressure roller
Welding
direction
Material
plasticizing
with hot air
Pre-heating
with contact
heat
Pre-heating, drying
cleaning of the material
with hot air
Hot air
Pinch roller
Welding nozzle
Hot air outlet
Hot air stream
Upper liner
Lower liner3 2 1
Lap welding
• Simultaneous digital display of SET and ACTUAL value of
– Welding temperature
– Welding speed
– Welding pressure
– Seam thickness reduction
– Voltage
• Microcontroller for control of welding temperature and
speed. SET values remain constant regardless of
– Voltage fluctuations
– Ground surface variations
– Changes in ambient temperatures
• Humid and tropics-proved LCD display with background
illumination for underground working
• Waterproof special heat cartridges
• Waterproof keyboard
• Stepless welding pressure adjustment without
tools
• Swivel-head guarantees equalizing of pressure to
the drive/pressure rollers. Perfect welding of
T-joints without any problems
• Large overlap width makes laying and welding
easy
• Easy operation and user friendly handling ensure
problem-free processing
• Designed for field application
• Field tested
Technical highlights of LEISTER welding machines
8. ®
LEAFLET STT/10.2001
Order Illustration
Number not to scale
107.135
106.992
106.993
5,7
3,7
7
5
107.132
107.123
106.975
106.976 Pressure roller 28mm (PTFE)
110.052
110.051
106.950
5,7
7
5
3,7
Endless profiled welding rod 5.7 × 3.7mm, 7 × 5mm in PVC-U (grey), PVC-P (transparent),
PE-HD (black), PE-LD (black), PP (beige)
Speed welding nozzle 5.7mm push-fit on Tubular nozzel ø 5mm
Speed welding nozzle 7mm push-fit on Tubular nozzel ø 5mm
Test kit with injector needle
Test kit for welding fittings
Wide slot nozzle 40mm, PTFE coated push-fit on Triac PID/Triac S, Diode PID/Diode S
Wide slot nozzle 40mm push-fit on Triac PID/Triac S, Diode PID/Diode S
Wide slot nozzle 20mm, push-fit on Triac PID/Triac S, Diode PID/Diode S
Welding fitting PE
One arm pressure roller 40mm with ball bearings (silicon)
100.303 Tubular nozzle ø 5mm push-fit on Triac PID/Triac S, Diode PID/Diode S
Accessories, Civil Engineering and Tunnel Construction
ISO 9001:2000LEISTER Process Technologies
Riedstrasse
CH-6060 Sarnen/Schweiz
Tel. + 41- 41 662 74 74
Fax + 41- 41 662 74 16
www.leister.com e-mail leister@leister.com
112.628
112.626
112.627
112.625
112.630
Welding shoe complete, for fillet weld 10mm Weldmax
Welding shoe complete, for overlap 20mm Weldmax
Welding shoe complete, for fillet weld 8mm Weldmax
Welding shoe complete, for fillet weld 6mm Weldmax
Welding shoe complete, for fillet weld 5mm Weldmax
112.624 Welding shoe complete, for V-seam 10mm Weldmax
112.623 Welding shoe complete, for V-seam 8mm Weldmax
112.621 Welding shoe complete, for V-seam 6mm Weldmax
112.629 Welding shoe complete, for V-seam 5mm Weldmax
112.830
112.852
Welding shoe complete blank Weldmax
Storage case for Weldmax
Technical data are subject to change without notice
114.104 Shipping case for Astro