Langir's capacitive switches are designed for durability, featuring a range of bushing diameters and the ability to operate for 50 million cycles. They utilize auto-calibration to adapt to environmental changes and have various electrical specifications, including a maximum current rating of 200 mA. The switches are suitable for industrial applications, are IP68/IP69K rated for sealing, and come with a selection of customization options for sizes, colors, and illumination types.

1. www.langir.com
Capacitive switch

2. FEATURES ENVIRONMENTAL SPECIFICATIONS
Bushing diameter：
16 (.630), 19 (.748), 22 (.866) or 25(0.984)
Activated by the touch of a finger
50 million cycles
Auto-calibration function
Momentary or latching
Illuminated and Non-illuminated
The new CP series capacitive switches technology senses
the touch of a finger and creates an electrical charge to
activate the switches
An auto-calibration function ensures the sensor adapts to
changing external environments.
LANGIR's capacitive switches are specially designed for
durability and a low activation force. As sensitive as a touch
screen, the capacitive switches are perfect for industrial
applications where repetitive activation can cause operator
fatigue.
ELECTRICAL SPECIFICATIONS
This switch should not be used in safety applications.
WIRING FOR SWITCH CONNECTOR
3
• Pin 1 : GND
6
• Pin 2 : output
5
2
• Pin 3 : +V MATERIALS
4
Chamfer • Pin 4 : LED 2
1
• Pin 5 : • Case : aluminum, anodized or stainless steel 316L
• Pin 6 : LED 1 • Multi-wire leads section 0.22 mm2
length 300 mm
WIRING DIAGRAMS
1 LED 2 LEDs
Non-illuminated
Output indicator Independent Output indicator Independent Legend
R red +V
Black black GND
W white output
A = same colour as LED
Wire colours may vary.
Always refer to the label
on the switch.
R W R W R W R W R W
OFF-ON
Black Black A Black Black A A Black
R W R W R W R W R W
OFF-MOM
Black Black A Black Black A A Black
Dimensions: first dimensions are in mm while inches are shown as bracketed numbers.
Tolerance: The general tolerance for dimensions in this brochure is ± 0,3 (.012).
Dimensions, specifications and data shown in this brochure are subject to change without notice.
++ Langir Electric + T 86 (577) 62737672 F 86 (577) 62737671 + langir@langir.com + www.langir.com ++
• Sealing : IP68 and IP69K according to IEC 60529
• Triggered by flowing water
• Impact resistance : IK10
• Operating temperature : -20 °C to +65 °C (-4 °F to +149 °F)
• ESD : complies with EN61000-4-2 (extended) ± 8KV (20 contacts)
and ± 15KV (20 air discharges)
• Max. current/voltage rating : 200 mA 24 VDCDC, 3A 24 VAC/DC or request
• Supply voltage : 5 VDC, 12 VDC or 24 VDC
• Life expectancy : 50 million cycles
• Power consumption non-illuminated : 7 mA
• Power consumption illuminated : 25 mA
• Operating force : 0 N
• LED state for output image option :
1 LED : the LED is ON when the output is closed.
2 LEDs : first color is ON when the output is open. Second color is ON when
the output is closed.
• Output type : NPN or PNP
• Cable, length 300 mm, section depending on switch model
• Connector : HE14 6V compatible with AMP/TYCO281839-3
SPECIFICATIONS
Capacitive switch

3. Capacitiveswitch
Capacitive switch
CP-
Switch size
16 =16mm
Terminals Output19 =19mm
22 =22mm Blank NPN
25 =25mm F Flyingleads
X Cable Z PNP
Colours / Materials C Connector
A0
A1
Natural anodized aluminum
Blue anodized aluminum
The terminals can
be customized
Switch status
Type of illum.
A2 Black anodized aluminum
A3 Green anodized aluminum
A5 Gold anodized aluminum
A6 Red anodized aluminum
B Stainless steel 316L
NO Normally open
NC Normally closedVoltage
Switch function
Operator
M Momentary
R1
Blank detanimulli-noN
A 13.5 Large ring 5VDC
N 13.5 Large ring 12VDC
K 13.5 Large ring 24VDC
P 16.5 Thin ring 5VDC
J 16.5 Thin ring 12VDC
Y 16.5 Thin ring 24VDC
P, J, Y for dia. 22 & 25only
L Latching
R2
RY
Single colours
RZ
Double colours
Flat, operator height 4.5 mm
Available with illuminated ring 16mm only.
Flat, operator height 3.00
Available with illuminated ring 19mm only.
With chamfer, operator height 4.5 mm (.177).
Available with thin or large illum. ring 22, 25mm only.
Flat, operator height 4.5 mm (.177).
Available with thin or large illum. ring 22, 25mm only. Blank Non-illum.
BBlank Chamfer, operator heigh 16=2.00/ 19=3.00
The operator can be customized
Blue
Blank Non-illum. Green
RG
G
R
Y
W
Red/green Red
RY Red/yellow Yellow
RB Red/blue White
RW Red/white
GB Green/blue
GY Green/yellow
GW Green/white
BY Blue/yellow LED function
BW Blue/white
YW Yellow/white
S Independent
C Output indicator
Mounting accessories standard hardware supplied :1 hex nut and 1 O-ring
Packaging unit: 10 pieces
For options not listed above, please contact LANGIR.
++ Langir Electric + T 86 (577) 62737672 F 86 (577) 62737671 + langir@langir.com + www.langir.com ++
The appearance of the products listed on this file, color, parameters are for reference only, issued a kind of Langir Company shall prevail.
LANGIR Company reserves the right to modify or cancel the relevant parameters of this file does not advance notice.
If in doubt, please contact customer service hotline.

4. Ø16.20
Ø25.20
Ø19.20 Ø22.20
(.637 DIA) (.874 DIA) (.992 DIA)
(.756 DIA)
4.50
Bushing Ø 16 mm (.630)
10.00
(.177) (.984)
Flat
Chamfer 25.00
(.984)
R1
CP16BFR1FANOMBC
3.00
Bushing Ø 19 mm (.748) (.118)
Flat
Chamfer 25.00
(.984)
CP19BR2FKNOLBC R2
Bushing Ø 22 mm (.866) - large or thin ring
Flat
Chamfer
CP22BRYFNNOMBC
RZ
Bushing Ø 25 mm (.984) - large or thin ring
Flat
Chamfer
CP25BRZFNNOMBC
RZ
Ø16.50Ø16.50
(.709DIA)(.709DIA)
Ø18.00
Ø22.00(.708DIA)
3.203.20
(.866DIA)
(.126)25.00(.126)
(.984)25.00
(.984)
Ø13.5010.00Ø13.50
(.531DIA)(.984)(.531DIA)10.00
(.984)
Shown with flying lead terminals.
2.00 Ø19.00x1.00 SI
10.00 1.20 (.079)
(.984)
(.748DIAx1.00 IS)
(.047)
Ø13.50
(.531DIA)
RA
Ø28.00 2.00
(1.102DIA) (.079)
Ø20.50
(.807DIA)
0.22mm 2
30CM
RY
Ø30.00 2.00
(1.181DIA) (.079)
Ø23.50
(.925DIA)
30CM
0.22mm 2
RY
0.22mm2
30CM
4.704.70Ø13.50
(.185)(.185)(.531DIA)
4.50
4.50(.177)
Ø16.50(.177)Ø16.50
(.709DIA)(.709DIA)
1.20
(.047)
3.203.20
(.126)(.126)
Ø13.50Ø13.50
(.531DIA)(.531DIA)
4.704.70
(.185)(.185)
Ø22.00x1.00SI
IS00.1x00.52Ø
(.866DIAx1.00IS)
30°
45°
30°
++ Langir Electric + T 86 (577) 62737672 F 86 (577) 62737671 + langir@langir.com + www.langir.com ++
)SI00.1xAID489.(
Capacitive switch
Capacitiveswitch

5. YUEQING LANGIR ELECTRIC CO., LTD.
ADD: 4F, NO. 188 LIUQING NORTH RD, LIUSHI, YUEQING, ZHEJIANG, CHINA 325604
FAX: 86 (577) 62737671
TEL: 86 (577) 62737672 62737670
MAIL: langir@langir.com
Http://www.langir.com
Copyright Langir Electric All Right Reserved.
Disclaimer: The appearance of the products listed on this catalogue, color, parameters are for reference only, issued a kind of Langir Electric Company shall prevail.
Langir Electric Company reserves the right to modify or cancel the relevant parameters of this catalogue does not advance notice. If in doubt, please contact your sales representative.