Cameron Punton has over 15 years of experience as a Chartered Engineer in subsea pipeline design, project management, and inspection, maintenance and repair work. He has worked on numerous projects in the North Sea, Australia, Middle East, and other regions. His experience includes roles such as project manager, interface manager, principal pipeline engineer, and consultant on projects involving pipeline design, inspection, and repair.

1. Curriculum Vitae - Cameron Punton Page 1 of 5
Cameron Robert Punton
Telephone: +61 (0) 404 170 149 (M)
Email: cameron@punton.org
Current Position: Project Manager / Subsea Pipeline Engineer.
Qualifications: Chartered Engineer (CEng) MIMechE
MSc Offshore Engineering
B.Eng. (Hons) Mechanical Engineering
Nationality: British and Australian Citizen
1 : PROFILE:
I am a Charted Engineer with over fifteen years’ experience in offshore pipeline design from
conceptual engineering through to detailed design. I also have Project Management and Inspection,
Maintenance and Repair experience in the North Sea, Australia and Middle East.
Recently I have been providing and managing the engineering support for the inspection of two
subsea pipelines in Kuwait. The work involved liaising with the client and providing owners
engineering support and reviewing and working with their subcontractors.
Prior to that I was responsible for managing a large FEED scope for OXY’s Phase 5 Development of the
Idd El Shargi Field in the Middle East. Prior to taking over the role, I worked in Doha as the Interface
Manager where I was responsible for interfacing with the client and topside engineering contractor.
I have also been responsible for managing various other smaller projects from small FEED scopes
though to extensive experience assessing free span rectifications during IMR campaigns.
I have experience working in Total’s Marine and Pipeline department in Aberdeen during an 18 month
secondment where I acted as an offshore representative for an ROV inspection campaign and free
span rectification using rock dumping as well as performing riser defect assessments and identifying
and assessing a clamp failure on a SSIV structure.
As an engineer I have over 10 years’ experience performing, checking and approving detailed
calculations from all aspects of offshore pipeline design including tie-in spools and structural pipework.
2 : CORE COMPETENCIES:
Project Management including budgeting for design activities, work flow planning, coordination of
resources and team management.
Tender documentation preparation.
Field Layout Architecture.
Subsea pipeline IMR.
Detailed knowledge of British, Australian and DNV standards and recommend practises.
Design verification of 3rd
party designs.
Detailed Design of subsea pipeline, piping and tie-in spool assemblies, including riser interfaces
and manifolds.
Concept development and option appraisal, detailed construction and installation cost estimating.
Experienced in the delivery and process of a number of deliverables such as technical reports,
specifications, field and fabrication drawings.
• Detailed understanding of how pipeline and structures interact as a system in service and how
this impacts the design.
3 : EMPLOYMENT HISTORY
Subsea Engineering Associates (November 2015 – Current)
Position: Lead Project Engineer
Arabian Gulf Pearl KNPC Bunkerline Pipeline Inspection
Lead Project Engineer responsible for overseeing the engineering for performing the pipeline
inspection of two subsea bunnkerlines. Responsible for overseeing the generation of client
documentation including HSE Plan, Project Execution and Quality Plan, Emergency Response Plan,
Medical Emergency Response Plan, Oil Spill Containment and Response Procedures, Project
Emergency Notification Chart, Subcontractor Management Plan. I was also responsible for reviewing
the supplied data, determining the pigability of the pipelines, proposing modifications for pigability and
identify inconsistencies between the original design and as-built configurations.

2. Curriculum Vitae - Cameron Punton Page 2 of 5
Origin Otway Phase 4 Concept Studies
Developed preliminary field layouts, wall thickness and stability assessment for cost estimation for
various Phase 4 layouts for flexible and rigid pipelines.
S2V Consulting Pty Ltd (formerly Xodus Group) (November 2007 – July 2015)
Position: Consultant / Principle Pipeline Engineer / Senior Pipeline Engineer
Santos VIC-P44 and Casino Pipeline Free Span Assessments
Project Manager responsible for overseeing the free span, stability and revalidation of VIC-P44 Henry
pipeline. ROV footage also highlighted that the stability mattress had been damaged resulting in half
the original restraint was available. Revised and optimised stability analysis was performed and
validated by DNV.
Oxy’s Idd El Shargi Phase 5 FEED
Project Manager for the subsea pipelines FEED and riser detailed design associated with the Idd El
Shargi Phase 5 project, offshore Qatar. Cameron managed a team of up to 15 personnel to deliver this
fast track project that involving 26 subsea pipelines, risers, and associated subsea tie-ins.
Interface Manager responsible for liaising between the Oxy and AMEC BlackCat to ensure a smooth
interface on a fast track FEED design.
ConocoPhillips Pipeline Repair Scenarios for Sunrise
Reviewed the available pipeline repair scenarios for performing a deepwater pipeline repair along the
proposed pipeline route from Sunrise to East Timor across the Timor Trench.
Woodside GWF-1 Detailed Design and Follow-On
Principal pipeline engineer responsible for peer review and assistance with the S2V scope of work on
the conductor riser and pipeline expansion spool design.
Woodside Engineering Standards Update
Principal pipeline engineer responsible for overseeing the S2V scope of work on updating Woodside
Engineering Standards.
Santos Fletcher Finucane Detailed Design Owners Engineering Support
Principal pipeline engineer responsible for overseeing the S2V scope of work supporting Santos during
the detailed design of the flexible subsea field development. Scope of work included reviewing flexible
flowline basis of design, flexible flowline design report, rigid tie-in spool design and review of
installation contractor specifications. Detailed on-bottom stability assessments were also performed
for the flexible flowlines, umbilicals, control jumpers and flying leads for validation.
Woodside GWF Conductor Riser Validation and Tie-In Spool FEED
Principal pipeline engineer responsible for overseeing the S2V scope of work on the conductor riser
validation and FEED of the riser tie-in spool.
Crux Gas-Liquids Development Cost Review Summary
Principal pipeline engineer responsible for the subsea cost estimate for the Crux Gas Field.
Santos Fletcher Finucane Screening Study
Principal pipeline engineer responsible for overseeing the subsea scope of work involving developing
flowline routing and field architecture for flexible and rigid pipelines, materials selection, mechanical
design, preliminary pipeline stability and susceptibility to lateral buckling.
INPEX Ichthys Performance Standards
Principle engineer responsible for developing performance standards for the flexible flowlines, flexible
risers, riser support structure, subsea structures and the gas export pipeline.
Santos VIC-P44 and Casino Pipeline Free Span Assessments
Principal engineer responsible for overseeing DNV-RP-F105 Level 1 and Level 2 free span assessments
on the VIC-P44 and Casino pipelines.
Apache Energy Integrity Group Support
Principal Engineer responsible for reviewing the pipeline design documentation relating to the Gorgon
projects crossing of AEL’s existing assets in addition to identifying, collating and conducting a desktop
review of the available Metocean data for AEL subsea pipeline assets tied back to Varanus Island plus
the Stag and Devil Creek Fields. Also responsible for development of DNV-RP-F105 Level 1 and Level
2 Free Span Guideline and reviewing Simpson replacement umbilical stability calculations.

3. Curriculum Vitae - Cameron Punton Page 3 of 5
Apache Integrity Group Support
Principal Engineer responsible for development of DNV-RP-F105 Level 1 and Level 2 Free Span
Guideline and reviewing Simpson replacement umbilical stability calculations. Also responsible for
identifying, collating and conducting a desktop review of the available Metocean data for AEL subsea
pipeline assets tied back to Varanus Island plus the Stag and Devil Creek Fields.
Gorgon Pipelines HDD Tail Analysis
Principal Engineer responsible for overseeing the analyses conducted on the Gorgon HDD tail analyses.
The scope of work included confirming pipe integrity within the HDD and analysing the HDD exit angle
and confirming tail integrity under spanning and environmental loading.
QCLNG Narrows Crossing FEED
Principal Engineer responsible for performing conceptual design of multiple pipeline options. Areas
addressed include Route Details; Stability Analysis; Span Analysis; Pipeline Separation; Cathodic
Protection; Crossing Design; Fibre Optic Cable Design; Seismic Design; Material Take Off;
Construction and Installation; Design Philosophies; Costing and Schedule; Health, Safety and
Security; and Environmental Engineering.
Woodside Lady Nora Concept Study
Principal Engineer responsible for performing subsea scope of work including field layout sketches,
subsea MTO and producing Subsea Technical Definition report to allow for subsea cost estimation for
various filed development options.
Santos VIC-P44 Follow on Engineering
Principal Engineer responsible for managing the follow on of the detailed design of the 12-inch
diameter subsea pipeline from the Henry, Netherby and Pecten East Fields to the existing subsea PLEM
at Casino, in the Otway Basin.
OMV New Zealand
Senior Pipeline Engineer responsible for performing subsea scope of work including wall thickness,
field layout and preliminary costing for various field development options.
Varanus Island Repair Project - Engineering Support Services
Senior Engineer responsible for overseeing scope of work including wind induced vibration analyses
and suppression options, cathodic protection reviews and AutoPipe analyses.
Ithaca Athena FPSO Option Subsea FEED
Senior Engineer responsible for performing subsea scope of work including wall thickness, Stability,
upheaval buckling, pipeline expansion, tie-in design and valve specifications.
Talisman GFA Development JV Study
Senior Engineer responsible for performing conceptual design of subsea scope of work including HPHT
flowlines, caissons and conductor risers. Subsea scope of work included wall thickness, Stability,
upheaval buckling and cost estimates.
Apache Simpson Project
Senior Engineer responsible for validation of the Simpson Pipeline Replacement detailed design
documents.
Santos/Helix VIC-P44 Detailed Design
Senior Engineer responsible for performance of the detailed design of the 12-inch diameter subsea
pipeline from the Henry, Netherby and Pecten East Fields to the existing subsea PLEM at Casino, in the
Otway Basin.
J P Kenny Pty Ltd (August 2005 – November 2007)
Position: Lead Pipeline Engineer / Senior Pipeline Engineer
Apache Devil Creek Development Project
Lead Pipeline Engineer, responsible for overseeing subsea pipeline concept studies.
Woodside Enfield Project
Lead Pipeline Engineer, responsible for validation of the Spoolpiece In-Place Design Report.
Woodside Vincent Project
Senior Pipeline Engineer, responsible for validation of the Spoolpiece In-Place Design Report.

4. Curriculum Vitae - Cameron Punton Page 4 of 5
Santos Mutineer Exeter Development:
Senior Pipeline Engineer, responsible for the Exeter EP5 Tie-In Spool Validation Report.
Santos Martha/Henry FEED
Senior Pipeline Engineer, responsible for pipeline routing study, wall thickness selection, pipeline
stability, umbilical stability, mattress stability & spacing, pipeline expansion, span analysis, bottom
roughness, preliminary lateral buckling analysis and design premise.
Chevron Gorgon FEED
Senior Pipeline Engineer, responsible for wall thickness selection, pipeline expansion, pipeline stability,
cost estimation, secondary stabilisation selection, secondary stabilisation preliminary design, free span
rectification methodology, deepwater buckle arrestor design, preliminary& detailed lateral buckling
analysis and pipelines technical summary.
JP Kenny Caledonia (July 2001 – August 2005)
Position: Senior Pipeline Engineer / Pipeline Engineer
Talisman Galley Field Redevelopment FEED Study
Senior Pipeline Engineer, responsible for wall thickness verification / selection, pipeline stability
verification, pipeline expansion, stress analysis.
Talisman Orion Tor Detailed Design
Senior Pipeline Engineer, main focal point for client contact and responsible for information retrieval,
Basis of Design, field layout drawings, isometric drawings, manifold general arrangement drawings,
wall thickness design, stability design, stress analysis, cathodic protection design, protection design
and material take off. Support was also provided through the project for material, coating and valve
selection.
Talisman Orion Tor Conceptual Design
Senior Pipeline Engineer, main focal point for client contact and responsible for information retrieval,
Basis of Design, material take off, field layout drawings, isometric drawings and price quotations from
fabricators.
Magnus Gas Lift to Penguins FEED
Senior Pipeline Engineer, responsible for Basis of Design and tie-in FEED including wall thickness,
stability, free span, stress analysis and layout
Lundin Mattress Stability
Senior Pipeline Engineer, responsible for review of client analysis and verifying mattress stability
analysis methodology.
Britannia Satellites Phase 1
Senior Pipeline Engineer, responsible for checking and performing tie-in spool stress analysis, manifold
wall thickness selection, material take off reports.
Total E & P UK PLC Secondment
Pipeline Engineer, assist Senior Pipeline Engineer in maintenance and analysis of Total’s North Sea
Pipelines. The various tasks performed to date are: Updating pipeline emergency procedures manual;
Updating pipeline repair manual; Updating the pipelines technical manual; Conducting a lateral
buckling review of hot pipelines; Perform an initial review of SSIV anchor clam failure; Planning and
supervising a remedial rock dumping works as client rep including application for required permits;
Client rep overseeing annual ROV visual survey, Riser defect assessments; Writing Design, Fabrication
and Installation Resume for Otter Field Development; Fatigue assessments (including creation of a
spreadsheet to monitor current fatigue levels); Creation of pipeline performance standards. Other
activities included information retrieval from archive for project work and answering general/technical
queries on Total’s pipeline system.
Braemar Field Development (Detailed Design)
Pipeline Engineer, responsible for stability analysis of pipe-in-pipe flowline and tie-in analysis of the
associated spools. Responsible for riser stress analysis of the riser that was located within a
protective caisson and the “bridge spool” that spanned the drill cuttings mound.
Brae B to Miller Link Line Development (Detailed Design)
Pipeline Engineer, responsible for stability analysis and design premise.

5. Curriculum Vitae - Cameron Punton Page 5 of 5
Scoter Field Development (Detailed Design)
Pipeline Engineer, responsible for manifold piping stress analysis.
ABB Tree Spool Analysis:
Pipeline Engineer, responsible for stress analysis of the tree tie-in spool pipework.
Juno Field Development (Detailed Design)
Pipeline Engineer, responsible for wall thickness, expansion, free span and tie-in analysis of nine
pipelines and associated tie-in spools.
NECE Group (March 2001 – July 2001)
Position: Graduate Engineer
Graduate engineer responsible For Writing Reports on Non-Intrusive Inspections, Preparing Written
Schemes of Examination.
4 : EDUCATION
UNIVERSITY EDUCATION
Postgraduate Degree: 1 Year Master’s Degree Course in Offshore Engineering (1999 – 2000)
The Robert Gordon University, Aberdeen, Scotland
Undergraduate Degree: 4 Year Degree Course in Mechanical Engineering. (1995 – 1999)
Aberdeen University, Aberdeen, Scotland
SOFTWARE COMPETENCIES
Proficient: MS Word, MS Excel, MS Outlook, MS PowerPoint, MathCAD, AutoPipe.
Familiar: AutoCAD, FS2000, Abaqus, Ansys.