Call for papers engg
•
0 likes•196 views
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Report
Share
Report
Share
Download to read offline
Recommended
Papers solicited 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Submissions invited journal
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper journal 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper and participations
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper & participations
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper journals 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Recommended
Papers solicited 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Submissions invited journal
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper journal 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper and participations
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper & participations
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper journals 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper engg
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers and participation
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Papers invited journal 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper engg 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Papers solicited journal 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers engineering 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Submissions invited for journal
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers journal 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper engineering 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers journals 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers engg 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Submissions invited
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper journal
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers journal
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers journals
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper
IJAET welcomes research articles from scientists, Engineers and Research Scholars involved in all areas of engineering and technology from all over the world to publish high quality research papers. Papers for publication in the IJAET are selected through rigorous peer review to ensure originality, timeliness, relevance, and readability.
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
HOW TO PREPARE YOUR REAL ESTATE DEVELOPMENT & CONSTRUCTION STANDARD OPERATING...
HOW TO PREPARE YOUR REAL ESTATE DEVELOPMENT & CONSTRUCTION STANDARD OPERATING PROCEDURES
TCC Amanda Hardt O REPOSICIONAMENTO DA MARCA MCDONALD’S. UM ESTUDO DAS ESTRA...
TCC Amanda Hardt O REPOSICIONAMENTO DA MARCA MCDONALD’S. UM ESTUDO DAS ESTRATÉGIAS DE COMUNICAÇÃO DA CAMPANHA “ALÉM DA COZINHA”
Psychology, Science, and Pseudoscience: Class #17 (MMR-Autism Scandal)
In short: Our next case-study from mainstream psychology relates to 'Autism Controversies'; specifically, the Wakefield MMR vaccination scare scandal.
Conférence "Optimiser son référencement Internet"
- Le référencement naturel est (toujours !) le meilleur moyen d'attirer de nouveaux clients
- Le référencement ne coûte pas cher
- Le référencement n'est PAS une histoire de technique, mais de communication et de bon sens !
Cette mini-formation s'adresse aux entrepreneurs qui ont un site ou un projet de site Internet.
More Related Content
What's hot
Call for paper engg
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers and participation
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Papers invited journal 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper engg 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Papers solicited journal 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers engineering 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Submissions invited for journal
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers journal 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper engineering 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers journals 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers engg 2013
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Submissions invited
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper journal
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers journal
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers journals
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper
IJAET welcomes research articles from scientists, Engineers and Research Scholars involved in all areas of engineering and technology from all over the world to publish high quality research papers. Papers for publication in the IJAET are selected through rigorous peer review to ensure originality, timeliness, relevance, and readability.
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
What's hot (17)
Viewers also liked
HOW TO PREPARE YOUR REAL ESTATE DEVELOPMENT & CONSTRUCTION STANDARD OPERATING...
HOW TO PREPARE YOUR REAL ESTATE DEVELOPMENT & CONSTRUCTION STANDARD OPERATING PROCEDURES
TCC Amanda Hardt O REPOSICIONAMENTO DA MARCA MCDONALD’S. UM ESTUDO DAS ESTRA...
TCC Amanda Hardt O REPOSICIONAMENTO DA MARCA MCDONALD’S. UM ESTUDO DAS ESTRATÉGIAS DE COMUNICAÇÃO DA CAMPANHA “ALÉM DA COZINHA”
Psychology, Science, and Pseudoscience: Class #17 (MMR-Autism Scandal)
In short: Our next case-study from mainstream psychology relates to 'Autism Controversies'; specifically, the Wakefield MMR vaccination scare scandal.
Conférence "Optimiser son référencement Internet"
- Le référencement naturel est (toujours !) le meilleur moyen d'attirer de nouveaux clients
- Le référencement ne coûte pas cher
- Le référencement n'est PAS une histoire de technique, mais de communication et de bon sens !
Cette mini-formation s'adresse aux entrepreneurs qui ont un site ou un projet de site Internet.
Etude de marché Beiersdorf/Nivea
Etude de marché sur la viabilité d\'un champooing sec sous la marque NIVEA, groupe Beiersdorf. Projet Ecole de Management Leonard de Vinci
Viewers also liked (8)
HOW TO PREPARE YOUR REAL ESTATE DEVELOPMENT & CONSTRUCTION STANDARD OPERATING...
HOW TO PREPARE YOUR REAL ESTATE DEVELOPMENT & CONSTRUCTION STANDARD OPERATING...
TCC Amanda Hardt O REPOSICIONAMENTO DA MARCA MCDONALD’S. UM ESTUDO DAS ESTRA...
TCC Amanda Hardt O REPOSICIONAMENTO DA MARCA MCDONALD’S. UM ESTUDO DAS ESTRA...
Psychology, Science, and Pseudoscience: Class #17 (MMR-Autism Scandal)
Psychology, Science, and Pseudoscience: Class #17 (MMR-Autism Scandal)
Similar to Call for papers engg
Call for participation
IJAET welcomes research articles from scientists, Engineers and Research Scholars involved in all areas of engineering and technology from all over the world to publish high quality research papers. Papers for publication in the IJAET are selected through rigorous peer review to ensure originality, timeliness, relevance, and readability.
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper
IJAET welcomes research articles from scientists, Engineers and Research Scholars involved in all areas of engineering and technology from all over the world to publish high quality research papers. Papers for publication in the IJAET are selected through rigorous peer review to ensure originality, timeliness, relevance, and readability.
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for paper
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers
IJAET welcomes research articles from scientists, Engineers and Research Scholars involved in all areas of engineering and technology from all over the world to publish high quality research papers. Papers for publication in the IJAET are selected through rigorous peer review to ensure originality, timeliness, relevance, and readability.
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers1
IJAET welcomes research articles from scientists, Engineers and Research Scholars involved in all areas of engineering and technology from all over the world to publish high quality research papers. Papers for publication in the IJAET are selected through rigorous peer review to ensure originality, timeliness, relevance, and readability.
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers vol 6 iss 3
Deadline : 31st May 2013
Notification : 15th June 2013
Revision : 20th June 2013
Publication : 01st July 2013
IJAET welcomes research articles from scientists, Engineers and Research Scholars involved in all areas of engineering and technology from all over the world to publish high quality research papers. Papers for publication in the IJAET are selected through rigorous peer review to ensure originality, timeliness, relevance, and readability
Call for paper ijaet vol 6 iss 3
Deadline : 31st May 2013
Notification : 15th June 2013
Revision : 20th June 2013
Publication : 01st July 2013
IJAET welcomes research articles from scientists, Engineers and Research Scholars involved in all areas of engineering and technology from all over the world to publish high quality research papers. Papers for publication in the IJAET are selected through rigorous peer review to ensure originality, timeliness, relevance, and readability.
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
For list of IJAET topics visit, aim and scope (http://www.ijaet.org/aim-scope-of-ijaet/index.html)
All submitted papers would be evaluated through a peer-review process conducted by the editorial board of IJAET. For editorial workflow for the peer review process of IJAET visit (http://www.ijaet.org/peer-review-of-ijaet/index.html)
Call for paper
IJAET welcomes research articles from scientists, Engineers and Research Scholars involved in all areas of engineering and technology from all over the world to publish high quality research papers. Papers for publication in the IJAET are selected through rigorous peer review to ensure originality, timeliness, relevance, and readability.
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Call for papers journal
IJAET welcomes research articles from scientists, Engineers and Research Scholars involved in all areas of engineering and technology from all over the world to publish high quality research papers. Papers for publication in the IJAET are selected through rigorous peer review to ensure originality, timeliness, relevance, and readability.
IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
Similar to Call for papers engg (10)
More from P singh
ACTIVE SAFETY CONTROL TECHNIQUE TO PREVENT VEHICLE CRASHING
Alertness during driving is a key aspect. Even a small distraction for the driver may lead to genuine mishaps. The possible reasons can be obstacle, inadequate vehicle control system or human reflexes (e.g. shock) during sudden distraction. Therefore "Active" and "Passive" systems for vehicle control play a significant role in automotive safety. In this paper, we have discussed an active control technique to prevent the vehicle from crashing. Three different cases of vehicle speed are considered. The presented technique is designed to evaluate the possibility of collision for both front and rear side. The control action will be taken for safe and smooth driving under different situations like parking, urban driving and highway driving.
Numerical Analysis of Engineered Steel Fibers as Shear Reinforcement in RC Beams
Using suitable fibers and additives in concrete to enhance its performance is an important consideration in the concrete industry with regard to the structural aspects of concrete. The purpose of this project is to investigate numerically the effectiveness of the engineered steel fiber as shear reinforcement in RC beams. Here steel fibers completely replaces the shear reinforcement (stirrups & links). The dimension of beam taken was 1000*150*150 mm with aspect ratio 80. The beams were reinforced with 10 mm steel bars as secondary reinforcement and 12 mm bars as main reinforcement on the tension side. Numerical analysis using ANSYS R16.1 software package was carried out. The load-deflection curves for the beams with different dosage of fibers were drawn superimposing their numerical values. Initially, in all three cases the curve was linear elastic and about 80% of ultimate load they tend to be non-linear. It was observed that there was fair agreement between the results which indicates some favourable aspects concerning the use of steel fibres as shear reinforcement in concrete beams. It was investigated that the inclusion of steel fibres (Hook End Type) improves the shear strength of RC beams without stirrups by improving the matrix between concrete and steel fibers. Thus this project focuses in the design and analysis using the software ANSYS R16.1 for an alternative steel reinforcement with better or equivalent performance.
TRANSIENT ANALYSIS OF PIEZOLAMINATED COMPOSITE PLATES USING HSDT
Piezoelectric materials have excellent sensing and actuating capabilities have made them the most practical smart materials to integrate with laminated structures. Integrated structure system can be called a smart structure because of its ability to perform self-diagnosis and quick adaption to environment changes. An analytical procedure has been developed in the work based on higher order shear deformation theory subjected to electromechanical loading for investigating transient characteristics of smart material plates. For analysis two displacement models are to be considered i.e., model-1 accounts for strain in thickness direction is zero whereas in model-2 in-plane displacements are expanded as cubic functions of the thickness coordinate. Navier’s technique has been adopted for obtaining solutions of anti-symmetric cross–ply and angle-ply laminates of both model-1 and model-2 with simply supported boundary conditions. For obtaining transient response of a laminated composite plate attached with piezoelectric layer Newmark’s method has been used. Effect of thickness coordinate of composite laminated plates attached with piezoelectric layer subjected to electromechanical loadings is studied.
ARTISANAL BOATBUILDING IN BRAZILIAN SHORES: CRAFTSMEN, BOATYARDS, AND MANUFAC...
The majority of Brazilian small craft fishing fleet comes from artisanal boatyards which struggles with market pressure, professional social devaluation, and lack of raw materials. This work aims to provide a description about small craft artisanal boatbuilding in Brazilian shores to support initiatives to increase its social, economical, and environmental sustainability. On site visits and interviews about craftsmen social-economics; boatyards’ production organization; and manufacturing processes’ technological aspects were conducted. Results show that craftsmen are characterized by reasonable income and livelihood degree, compared with workers of similar educational level in their region. Relationships and work organization among them is traditionally structured and community based. Boatyards have sufficient structure, though access to new technologies and resources could be increased. Observed plank on frame building technique depends on workforce skills, commitment, and knowledge, as well as the resulting boats’ design and performance. Small craft artisanal boatbuilding is a living sector with its own dynamics, subjected to the creation and eventual adoption of new technologies. Instead of replacing the current manufacturing process by fibreglass reinforced polymer laminates, as suggested by some initiatives, it is believed that this sector’s sustainability can be increased by gradual introduction of tools, materials, and techniques while preserving its artisanal characteristics and qualities.
DESIGN AND FABRICATION OF THERMO ACOUSTIC REFRIGERATOR
In an age of impending energy and environmental crises, current cooling technologies continue to generate greenhouse gases with high energy costs. Thermo acoustic refrigeration is an innovative alternative for cooling that is both clean and inexpensive.
Thermo acoustic refrigerators are systems which use sound waves and a non-flammable mixture of inert gases to generate refrigeration effect. The main components are a closed cylinder, an acoustic driver, a porous component called a stack, and two heat-exchangers. Application of acoustic waves through the driver makes the gas resonant. As the gas oscillates back and forth, it creates a temperature difference along the length of the stack. This temperature change is due to compression and expansion of the gas by the sound pressure and the rest is a consequence of heat transfer between the gas and the stack. The temperature difference is used to remove heat from the cold side and reject it at the hot side of the system, producing cooling.
FIELD AND THEORETICAL ANALYSIS OF ACCELERATED CONSOLIDATION USING VERTICAL DR...
Mumbai is the region consisting of soft compressible marine clay deposits. There are several construction problems on such soils and thus ground improvement is need to be carried out. Vertical drains is generally preferred technique as accelerated settlement is achieved during the construction phase itself if planned accordingly. The concept of vertical drains is based on the theory of three dimensional consolidation as described by Terzaghi (1943). Based on this concept, a consolidation programme is developed and an attempt is made to determine the field to laboratory coefficient of vertical consolidation ratio by Taylor’s Square Root of Time Method and Casagrande’s Logarithm of Time Fitting Method for this region by considering the case study of Bhandup Lagoon Works Embankment. Based on this ratio, the rate of consolidation and time required for consolidation in the field can be determined knowing the consolidation parameters. Equations are developed by using output of the programme and it is explained.
ANALYSIS OF RING JET LASER GYRO RESONANT DITHERING MECHANISM
This paper presents the design, manufacture, testing and improvement of newly developed piezoelectric torsion actuator which generates angular displacement using piezo ceramics and torsion bar. The proposed piezoelectric torsion actuator generates angular displacement during dithering, directly invoking the shear mode of the piezoelectric material and hence no complicated additional mechanism is needed. The piezo plates are formed from a rectangular PZT material duly poled along the axial direction. The dither mechanism is divided into four segments that are arranged in circular configuration. Each of the segments off our piezoplates is bonded in opposite poling directions with soldering adhesive. The key to design of such an actuator is to match the torsion resonant frequency of the actuator with the excitation frequency. FEA for the Torsion bar is carried out to find the different resonant mode sand mode shapes. Also, a set of torsion bars and resonator are analyzed to evaluate the maximum angular displacement and stresses on torsion bars. An experimental investigation in terms of electrical impedance and angular displacement measurement was conducted to verify the mode analysis. Based on the FEA analysis, a new material for the torsion actuator was selected having high Curie temperature and stable relative dielectric constant so that it has higher tentivity even after bonding the piezo plates on torsion bars and also wire soldering process. The design analysis was verified with the experimental results for incorporation of the selected mechanism for the production of dither in the system.
CLOUD COMPUTING: SECURITY ISSUES AND CHALLENGES
Cloud storage is defined as "the storage of data online in the cloud," wherein a company's data is stored in and accessible from multiple distributed and connected resources that comprise a cloud. Although cloud service providers implement the best security standards and industry certifications, storing data and important files on external service providers always opens up risks. Using cloud-powered technologies means you need to provide your service provider with access to important business data. Meanwhile, being a public service opens up cloud service providers to security challenges on a routine basis. The ease in procuring and accessing cloud services can also give nefarious users the ability to scan, identify and exploit loopholes and vulnerabilities within a system. For instance, in a multi-tenant cloud architecture where multiple users are hosted on the same server, a hacker might try to break into the data of other users hosted and stored on the same server. The following paper deals with the service models of cloud computing along with types of cloud computing & characteristics of cloud. Further challenges and security issues in cloud computing is also discussed and at last conclusion and future demand for research in the field of cloud computing.
STUDY ON THE BEHAVIOUR OF CUO NANO PARTICLES IN RADIATOR HEAT EXCHANGER FOR A...
In this present study, the forced convective heat transfer performance of automobile radiator has been studied experimentally by using Nano fluid (CuO-Water) as a coolant for an automobile radiator.. Experimental works were conducted to investigate the effect of Copper-Oxide (CuO) nanoparticles volume concentration and the operating temperatures on the rate of Nano fluids heat transfer in a radiator heat Exchanger. CuO nanoparticles were mixed with the base fluid water and also Sodium Lauryl Sulphate (SLS) powder was added to enhance the mixing process and stabilize the dispersion of the Nano fluids. Experimental runs were conducted at varying operating temperatures which include that, CuO-water at different temperature such as 40℃, 50℃, 60℃, 70℃, 75℃, 78℃, 80℃, 83℃. Among the operating temperatures selected for study 80℃, gives the best performance in heat transfer and the convection heat transfer coefficient. The results of the current work generally indicate that Nano fluids have the potential to enhance the heat transfer of a compact heat exchanger. Results indicate that, best overall heat transfer coefficient for the radiator is obtained at a hot fluid inlet temperature of 80℃, and at a flow rate of 0.075kg/sec.
DESIGN OF STACKED MICROCHANNEL HEAT SINKS USING COMPUTATIONAL FLUID DYNAMIC
The heat extraction problem is becoming an important factor in the development of micro-electronics. Over the last decade, micromachining technology has been increasingly used for the development of highly efficient cooling devices called heat sink because of its undeniable advantages such as less coolant demands and small dimensions. One of the most important micromachining technologies is micro channels. Hence, the study of fluid flow and heat transfer in micro channels which are two essential parts of such devices, have attracted more attentions with broad applications in both engineering and medical problems. Heat sinks are classified into single-phase or two-phase according to whether boiling of liquid occurs inside the micro channels
The microchannel heat sink is designed for electronic chips that could be effectively cooled by means of forced convection, by water flowing through the microchannels. This project presents a Computational Fluid Dynamics (CFD) flow simulation modeling, where water is made to flow across different cross-sectional microchannel heat sinks placed on heat source. The flow simulation of water and convective heat transfer are carried by using commercial software “Solid Works Flow Simulation”. In the CFD process stacked microchannels of various cross-sections viz., rectangular, triangular, pentagonal and circular are designed, then by defining the computational domain, boundary conditions as inlet mass flow (1e-5 kg/s),outlet pressure ( static pressure) and heat flux(750w/cm2) and by considering the parallel and counter flow direction of water in different cross-sectional microchannels the temperature drop in heat sink, pressure drop across the channels and amount of volumetric heat transfer coefficient are analyzed and compared.
SIGNIFICANCE OF RATIONAL 6TH ORDER DISTORTION MODEL IN THE FIELD OF MOBILE’S ...
As the time passed, multiple techniques have been proposed on the invisible video watermarking. Watermarking basically means to hide the information into many multiple objects. If the object is video then the name given to this technique is video watermarking. The information which is hidden in the object and isn't seen by anyone then it is called as an invisible watermarking. In this paper, we are using the LSB, SS (Spread Spectrum) and DWT technique for embedding the information into the video and also work on the rational distortion. Today distortion is the biggest problem. This distortion can be destroyed the hide information. The reason of distortion is transmission channel, hackers, viruses etc. In my proposed work, we are working on the rational 6th order model distortion. We are finding the PSNR, SSIM (Structural similarity index measure), Correlation, BER (Bit Error Rate), MSE (Mean Square Error) parameters for the distorted watermarked video and also detects the watermark (hide) information from the distorted watermarked video.
TRANSIENT ANALYSIS ON 3D DROPLET OVER HORIZONTAL SURFACE UNDER SHEAR FLOW WIT...
In the present work, an investigation has been made about the shape change and movement phenomena of liquid droplet over a horizontal solid surface under shear flow with adiabatic boundary condition. Finite Volume Method (FVM) with 3D Volume of Fluid (VOF) model has been used to formulate/simulate the complex interface in multiphase flow. The effect of important factors which govern the drop dynamics on a solid surface (like fluid properties: density, surface tension, viscosity and the surface characteristics: surface material, contact angle, roughness) have been studied extensively. Effects of shear strength in terms of air inlet velocity and drop size have also been studied by varying the Reynolds number of inlet air flow and drop volume respectively. Phase contours at different time instant have been produced for each of the case study. Again, the velocity contours and velocity vectors have also been generated for better understanding of the present phenomena. The acquired velocity by the droplet at different time instants has been calculated and the variation of the acquired velocity with time instants is plotted. Again it has been observed that depending upon various boundary conditions and external effects, it may possible to move the drop in any desired direction as per the requirement in various engineering applications like micro pumps, printers, coating devices etc.
STRUCTURAL RELIABILITY ASSESSMENT WITH STOCHASTIC PARAMETERS
The performance of a structure [23] is assessed by its safety [1], serviceability [1] and economy [1]. Since we do not know the exact details of loads [4] acting on a structure at any time, there is always some uncertainty about the total loads on structure. Thus random variables (means stochastic variable) of loads and other parameters are the main criteria of design variables [18]. They vary with space and time. The input variables is never certain and complete. The safety factor provided in the existing codes and standers primarily based on practice, judgment and experience, may not be adequate and economical. Using the techniques presented earlier, we can design or analyze individual members in the contest of structural reliability [2][3][22][24]. However we are not examined how the system performs [23] or how to calculate the reliability of the structure as a whole.
EXPERIMENTAL STUDY ON THE ANALYSIS OF HEAT ENHANCEMENT IN CORRUGATED TWISTED ...
In heat exchanger, the enthalpy is transferred between two or more fluids, at different temperatures. The major challenge in designing a heat exchanger is to make the equipment more compact and achieve a high heat transfer rate using minimum pumping power. In recent years, the high cost of energy and material has resulted in an increased effort aimed at producing more efficient heat exchange equipment. Furthermore, as a heat exchanger becomes older, the resistance to heat transfer increases owing to fouling or scaling. The heat transfer rate can be improved by introducing a disturbance in the fluid flow thereby breaking the viscous and thermal boundary layer. However, in the process pumping power may increase significantly and ultimately the pumping cost becomes high. Therefore, to achieve a desired heat transfer rate in an existing heat exchanger at an economic pumping power, several techniques have been proposed in recent years and are discussed under the classification section.
In this work, a study of transient heat transfer in double tube heat exchanger has enhanced. The inner tube of the setup was made with corrugation on both inner and outer walls by twisting the pipe from one end, which gives the more swirling motion to the fluid particles flowing over it. The flow inside the pipe was considered as turbulent, and the analysis was done experimentally and theoretically by using the ANSYS workbench. The experimental results were compared with the experimental values taken in the setup done by considering the inner tube as normal pipe. In both heat exchangers the values were taken and compared with the theoretical analysis. Temperature distribution and heat transfer rate were calculated and the details of the study have been discussed in this paper.
VLSI ARCHITECTURE OF AN 8-BIT MULTIPLIER USING VEDIC MATHEMATICS IN 180NM TEC...
A Multiplier is one of the key hardware blocks in most fast processing system which requires less power dissipation. A conventional multiplier consumes more power. This paper presents a low power 8 bit Vedic Multiplier (VM) based on Vertically & Crosswise method of Vedic mathematics, a general multiplication formulae equally applicable to all cases of multiplication. It is based on generating all partial products and their sum in one step. The implementation is done using cadence Virtuoso tool. The power dissipation of 8x8 bit Vedic multiplier obtained after synthesis is compared with conventional multipliers such as Wallace tree and array multipliers and found that the proposed Vedic multiplier circuit seems to have better performance in terms of power dissipation.
VIBRATION BUCKLING AND FRACTURE ANALYSIS OF CYLINDRICAL SHELL
Shell structures are widely used in civil, mechanical, aerospace and marine engineering applications (e.g. offshore oil tanks, automotive industry, aircraft and submarines). Like other types of structures, they are susceptible to various types of defect and damage such as cracking, corrosion, chemical attack and time-dependent material degradation, which may impair their structural integrity and affect their service life. The presence of cracks in a cylindrical structure can considerably affect its behavior. The effects of these imperfections on load carrying capacity and safety are thus important considerations in the design of cylindrical shell structures. This present work presents a finite element study on the vibration, buckling and fracture behavior of a cracked cylindrical shell with clamped type supports and subject to a time varying rotating speed. Vibration, linear elastic buckling and fracture parameters of a cracked cylindrical shell with time-varying rotating speed are analyzed. The effects of constant rotating speed, crack length and orientation of crack and length-diameter ratio of the cylindrical shell on the free-vibration and buckling behaviors are investigated.
HIGH SCHOOL TIMETABLING USING TABU SEARCH AND PARTIAL FEASIBILITY PRESERVING ...
The high school timetabling is a combinatorial optimization problem. It is proved to be NP-hard and has several hard and soft constraints. A given set of events, class-teacher meetings and resources are assigned to the limited space and time under hard constraints which are strictly followed and soft constraints which are satisfied as far as possible. The feasibility of timetable is determined by hard constraints and the soft constraints determine its quality. Difficult combinatorial optimization problems are frequently solved using Genetic Algorithm (GA). We propose Partial Feasibility Preserving Genetic Algorithm (PFP-GA) combined with tabu search to solve hdtt4, “hard timetabling” problem a test data set in OR-Library. The solution to this problem is zero clashes and maintaining teacher’s workload on each class in given venue. The modified GA procedures are written for intelligent operators and repair. The PFP-GA in association with Tabu Search (TS) converges faster and gives solution within a few seconds. The results are compared to that of using different methodologies on same data set.
WATER-DIESEL EMULSION: A REVIEW
Due to its impact on human health and the nature surrounding us, diesel engine emissions have been significantly reduced over the last two decades. This reduction has been enforced by the legislating organs around the world that gradually have made the manufacturers transform their engines to today’s complex high‐tech products. One of the most challenging area to meet the legislations is the emissions of the diesel engine which are the products of the combustion of diesel fuel. More restrictions have been imposed by the some governments to reduce these emissions to a level such that will not cause any harmful impacts for the environment after releasing them to the atmosphere. This paper examines the effects of combusting a mixture of diesel fuel, water, and surfactant which forms emulsion on the nitrogen oxides, or NOx, carbon monoxide CO, carbon dioxide CO2, sulfur oxides SOx emissions and particulate matter (PM) from a compression ignition diesel engine. Previous research has attributed the observed reduction of these emissions to a suppression of flame temperature due to quenching effects from the water, thereby reducing thermal NOx formation and other pollutants. The focus of this review paper will be on experiments were conducted a using diesel engine with pure diesel fuel and emulsion of water-diesel. Furthermore, results from the testing diesel fuel that mixed with varied ratios of water balanced with a surfactant to stabilize the emulsion will be presented and discussed. Three different samples of water- diesel emulsion were used with 10 % water and 90 % diesel, 20 % water and 80% diesel, and 30 % water and 70 % diesel (by volume) respectively to conduct the experiments in the lab . The purpose was to see the impact of adding the water from 10 % up to 30 % (by volume) to the diesel fuel making the emulsion fuel to explain what will occur to the emissions and the performance of the engine. The data shows significant NOx emission reduction when using the emulsion water diesel fuel of 30 % water (by volume) in diesel. These results are correlated with a thermodynamic first law analysis to estimate the adiabatic flame temperature of the standard fuel and fuel-water emulsion cases. Results indicate that thermal NOx is indeed reduced by quenching and flame temperature suppression confirming reports in the literature. Recommendations are given for further studies, including improving the fuel—water emulsion and considerations for long-term testing.
USAGE OF ETHANOL BLENDED PETROL: EXPERIMENTAL INVESTIGATIONS OF REDUCTION IN ...
An experimental study was conducted to evaluate what extent ethanol blends in Petrol helps in reduction of pollution levels of SI engines exhaust emissions. Ethanol blends E5, E10, E15, E20, E22 were tested and found considerable reductions in the pollutant levels of CO, CO2, HC. The results indicate better combustions in petrol engine with ethanol blends. The reductions in HC and CO were to the extent of 80% to 90% compared to pure petrol fuelled IC engine.
DESIGN CALCULATION FOR EQUIPMENT AND COMPONENTS SPECIFICATION OF LUBRICATING ...
The lubricating oil system is primarily used to lubricate wear surfaces to minimize friction losses, it cools internal engine parts which cannot be directly cooled by the engines’ water cooling system and it cleans the engine by flushing away wear particles amongst others. Adequate lubrications require lubricant (oil) with sufficient film strength to withstand bearing pressure and viscosity index low enough to allow adequate flow when subjected to heat. The system consist of the tanks (storage, settling, sump and head), lube-oil pumps, strainers, oil coolers, piping, valves, and fittings, lubricating oil purifier, sub system and condition monitoring devices amongst others. The lubricating oil system for a tug boat whose transmitting power is about 955KW was calculated mathematically to obtain the flow rate of the shaft line bearing cooling oil, stern tube bearing cooling oil, main engine camshaft bearing cooling oil and main engine camshaft bearing cooling oil. Modelled equations were employed to obtain the camshaft lube-oil pump capacity, surface area and storage tank. The cylinder lube-oil storage and density tanks were estimated to be 1m3 while the transfer pump is calculated to be approximately 0.4m3/hr. The various suction and discharge diameters and velocities of pumps in the lubricating oil system were determined; it was observed the suction pipe diameter is always bigger than the discharge pipe diameter while the discharge velocity is higher than the suction velocity for all the pumps including the camshaft lube-oil pump, cylinder oil transfer pump and main lube-oil transfer pump. This is a clear indication that the said design process met the international standard for the design of such a tug boat. Similarly the shaft line bearing cooling oil pipe, piston bearing cooling oil pipe and main engine lube-oil pipe discharge velocities were seen to be at the acceptable limits obeying the classification rules. All designs were done in accordance to the Lloyd’s specification rules and regulations for a sea going tug boat.
More from P singh (20)
ACTIVE SAFETY CONTROL TECHNIQUE TO PREVENT VEHICLE CRASHING
ACTIVE SAFETY CONTROL TECHNIQUE TO PREVENT VEHICLE CRASHING
Numerical Analysis of Engineered Steel Fibers as Shear Reinforcement in RC Beams
Numerical Analysis of Engineered Steel Fibers as Shear Reinforcement in RC Beams
TRANSIENT ANALYSIS OF PIEZOLAMINATED COMPOSITE PLATES USING HSDT
TRANSIENT ANALYSIS OF PIEZOLAMINATED COMPOSITE PLATES USING HSDT
ARTISANAL BOATBUILDING IN BRAZILIAN SHORES: CRAFTSMEN, BOATYARDS, AND MANUFAC...
ARTISANAL BOATBUILDING IN BRAZILIAN SHORES: CRAFTSMEN, BOATYARDS, AND MANUFAC...
DESIGN AND FABRICATION OF THERMO ACOUSTIC REFRIGERATOR
DESIGN AND FABRICATION OF THERMO ACOUSTIC REFRIGERATOR
FIELD AND THEORETICAL ANALYSIS OF ACCELERATED CONSOLIDATION USING VERTICAL DR...
FIELD AND THEORETICAL ANALYSIS OF ACCELERATED CONSOLIDATION USING VERTICAL DR...
ANALYSIS OF RING JET LASER GYRO RESONANT DITHERING MECHANISM
ANALYSIS OF RING JET LASER GYRO RESONANT DITHERING MECHANISM
STUDY ON THE BEHAVIOUR OF CUO NANO PARTICLES IN RADIATOR HEAT EXCHANGER FOR A...
STUDY ON THE BEHAVIOUR OF CUO NANO PARTICLES IN RADIATOR HEAT EXCHANGER FOR A...
DESIGN OF STACKED MICROCHANNEL HEAT SINKS USING COMPUTATIONAL FLUID DYNAMIC
DESIGN OF STACKED MICROCHANNEL HEAT SINKS USING COMPUTATIONAL FLUID DYNAMIC
SIGNIFICANCE OF RATIONAL 6TH ORDER DISTORTION MODEL IN THE FIELD OF MOBILE’S ...
SIGNIFICANCE OF RATIONAL 6TH ORDER DISTORTION MODEL IN THE FIELD OF MOBILE’S ...
TRANSIENT ANALYSIS ON 3D DROPLET OVER HORIZONTAL SURFACE UNDER SHEAR FLOW WIT...
TRANSIENT ANALYSIS ON 3D DROPLET OVER HORIZONTAL SURFACE UNDER SHEAR FLOW WIT...
STRUCTURAL RELIABILITY ASSESSMENT WITH STOCHASTIC PARAMETERS
STRUCTURAL RELIABILITY ASSESSMENT WITH STOCHASTIC PARAMETERS
EXPERIMENTAL STUDY ON THE ANALYSIS OF HEAT ENHANCEMENT IN CORRUGATED TWISTED ...
EXPERIMENTAL STUDY ON THE ANALYSIS OF HEAT ENHANCEMENT IN CORRUGATED TWISTED ...
VLSI ARCHITECTURE OF AN 8-BIT MULTIPLIER USING VEDIC MATHEMATICS IN 180NM TEC...
VLSI ARCHITECTURE OF AN 8-BIT MULTIPLIER USING VEDIC MATHEMATICS IN 180NM TEC...
VIBRATION BUCKLING AND FRACTURE ANALYSIS OF CYLINDRICAL SHELL
VIBRATION BUCKLING AND FRACTURE ANALYSIS OF CYLINDRICAL SHELL
HIGH SCHOOL TIMETABLING USING TABU SEARCH AND PARTIAL FEASIBILITY PRESERVING ...
HIGH SCHOOL TIMETABLING USING TABU SEARCH AND PARTIAL FEASIBILITY PRESERVING ...
USAGE OF ETHANOL BLENDED PETROL: EXPERIMENTAL INVESTIGATIONS OF REDUCTION IN ...
USAGE OF ETHANOL BLENDED PETROL: EXPERIMENTAL INVESTIGATIONS OF REDUCTION IN ...
DESIGN CALCULATION FOR EQUIPMENT AND COMPONENTS SPECIFICATION OF LUBRICATING ...
DESIGN CALCULATION FOR EQUIPMENT AND COMPONENTS SPECIFICATION OF LUBRICATING ...
Recently uploaded
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Building RAG with self-deployed Milvus vector database and Snowpark Container...
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
zkStudyClub - Reef: Fast Succinct Non-Interactive Zero-Knowledge Regex Proofs
This paper presents Reef, a system for generating publicly verifiable succinct non-interactive zero-knowledge proofs that a committed document matches or does not match a regular expression. We describe applications such as proving the strength of passwords, the provenance of email despite redactions, the validity of oblivious DNS queries, and the existence of mutations in DNA. Reef supports the Perl Compatible Regular Expression syntax, including wildcards, alternation, ranges, capture groups, Kleene star, negations, and lookarounds. Reef introduces a new type of automata, Skipping Alternating Finite Automata (SAFA), that skips irrelevant parts of a document when producing proofs without undermining soundness, and instantiates SAFA with a lookup argument. Our experimental evaluation confirms that Reef can generate proofs for documents with 32M characters; the proofs are small and cheap to verify (under a second).
Paper: https://eprint.iacr.org/2023/1886
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsEncryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Epistemic Interaction - tuning interfaces to provide information for AI support
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Recently uploaded (20)
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
zkStudyClub - Reef: Fast Succinct Non-Interactive Zero-Knowledge Regex Proofs
zkStudyClub - Reef: Fast Succinct Non-Interactive Zero-Knowledge Regex Proofs
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Epistemic Interaction - tuning interfaces to provide information for AI support
Epistemic Interaction - tuning interfaces to provide information for AI support
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Call for papers engg
- 1. International Journal of Advances in Engineering & Technology (IJAET) ISSN: 2231-1963 **** Smooth, simple and timely publishing of review and research articles! **** Call for Papers: IJAET, Volume 6 – Issue 3 IJAET welcomes research articles from scientists, Engineers and Research Scholars involved in all areas of engineering and technology from all over the world to publish high quality research papers. Papers for publication in the IJAET are selected through rigorous peer review to ensure originality, timeliness, relevance, and readability. IJAET is inviting fresh submissions for its forthcoming issue, Volume 6, Issue 3. Authors are encouraged to contribute their original research to the journal by submitting their research papers that comes under any of following category: research findings, projects, literature surveys, review works, case studies, short communications of high quality, theoretical or empirical research articles, book reviews, proposals, analysis, tutorials, editorials as well as pedagogical and curricular issues that describe significant advances in field of Engineering and Technology.
- 2. For list of IJAET topics visit, aim and scope (http://www.ijaet.org/aim-scope-of-ijaet/index.html) All submitted papers would be evaluated through a peer-review process conducted by the editorial board of IJAET. For editorial workflow for the peer review process of IJAET visit (http://www.ijaet.org/peer-review-of-ijaet/index.html) The following play a major role in disseminating IJAET data. http://www.squidoo.com/international-journal-of-advances-in-engineering-and-technology http://ijaet.academia.edu/EditorIJAET/Posts http://www.ijaet.org/call-for-paper-of-ijaet/index.html http://www.cfpinternationaljournal.com/ http://www.prolearn-academy.org/Members/editor_ijaet/IJAET-2013 http://www.callforpapers.biz/ijaet.html http://www.prolearn-academy.org/Members/editor_ijaet/CallForPapersIJAETJanIssue www.callforpapers.biz/cfp-list.html http://www.wikicfp.com/cfp/servlet/event.showcfp?eventid=24800 http://in.linkedin.com/groups/IJAET-Journal-4654769 http://www.callforresearchpapers.com/ http://www.academia.edu/2329168/Call_for_Papers https://groups.google.com/group/ijaet-journal?hl=en http://www.prolearn-academy.org/Members/editor_ijaet/Call%20For%20Papers%20IJAET http://www.call-for-papers.org http://ijaet.com/call_for_paper_ijaet.html http://www.linkedin.com/groups/Call-Papers-IJAET-Volume-6-4654769.S.224887034 http://www.prolearn-academy.org/Members/editor_ijaet/call-for-papers-international-journal-of- advances-in-engineering-technology https://docs.google.com/file/d/0B54N5ws75W5TdHlNY2d0dzU3bFE/edit?pli=1 http://www.wikicfp.com/cfp/servlet/event.showcfp?eventid=15433 http://www.callforpapersjournals.com/ http://www.ijaet.info/call_for_paper.html http://ijaet.blogspot.in/ https://docs.google.com/file/d/0B54N5ws75W5TYjM5QWprYVZ5V0U/edit?usp=sharing http://www.prolearn-academy.org/Members/editor_ijaet/CFP%20IJAET%202013
- 3. It is appreciated if you could share this information with your colleagues and associates. Thank you. URL: http://www.ijaet.org E-mail: editor@ijaet.org Important Dates