C 9318
•
0 likes•208 views
The C-9318 Gas Extinguishing Warning Indicator provides visual warning that a gas extinguishing system has been activated. It features a red LED that lights continuously after gas is released from the compatible GST gas extinguishing control panel. Installed at entrances, it alerts people not to enter the protected area with the message "Gas Extinguishing DO NOT ENTER". Powered by 24VDC, it connects in series with other indicators or a resistor for non-addressable operation with a gas extinguishing control system.
Report
Share
Report
Share
Download to read offline
Recommended
TMT80
The document provides product information for the iTemp TMT80 programmable head transmitter, including an overview of its application and functions, technical specifications and dimensions, details on electrical connection and pricing, and contact information for the manufacturer. The TMT80 can be used with various temperature sensors and has a 4-20 mA output, with its measuring range configurable via software. It is suitable for installation in a sensor head and provides accurate temperature measurement and transmission of signals.
Hsm20g datasheet
The HSM-20G humidity sensor module converts relative humidity to a standard voltage output between 1.0-3.0V. It is suitable for applications like humidifiers, dehumidifiers, air conditioners, and automotive climate control. The module has an operating humidity range of 20-95% RH with an accuracy of ±5% RH, and can operate between 0-50°C. It undergoes tests like impact, vibration, temperature cycling and humidity exposure to ensure reliability.
TMR35
The document provides technical specifications for the Easytemp TMR35 hygienic compact thermometer. Key details include:
- It measures temperature from -50 to +200°C with accuracy under 0.08% and fast response times under 2 seconds.
- Process connections include clamp, threaded, and hygienic styles with wetted parts made of 316L stainless steel.
- Electrical output is either a 4-20mA signal or Pt100 sensor. It has an IP66-rated housing and connects via an M12 connector.
- Dimensions, technical data, installation instructions and pricing are provided for configuration and purchase.
Alarm System/Home Alarm/Independent Gas Leakage Detector with Wired networkin...
The ALF-G031 is a ceiling-mounted, wired gas leakage detector that detects LPG and natural gas. It has relay, sound, light and electromagnetic pulse alarms and meets Chinese and European safety standards. The detector operates at 220V AC, alarms at 10% gas levels, and includes accessories like electromagnetic valves or manipulators.
Kidde Alarmline SenseTek-NL
The KIDDE Alarmline LWM-1 Linear
Heat Detection System allows early
detection of fire or overheating. It is
especially suited for confined areas or harsh
environments where adverse ambient
conditions cause other detection devices to
be unreliable or difficult to use.
The system consists of two components: the
sensor cable and the Alarmline control unit
LWM-1.
Gic india
General Industrial Controls Pvt ltd started operations in 1972 as manufacturers of hour-meter, time switches, Relays: voltage monitoring, thermistor, earth leakage, temperature controller, light energy management system, and injection molded plastic components.
Supply Monitoring Devices Series SM175
Features:
● Compact 17.5 mm wide.
● Multi-voltage from 3 x 208 to 3 x 480 V.
● Controls correct sequence of three phases & own supply voltage.
● LED indication for all faults & for change in settings during run time for better security.
● 1 C/O configuration.
● Selectable Under voltage / Over voltage / Asymmetry levels.
● Adjustable time delay.
Addressable fire system pricelist(fw) vedard
This document provides pricing information for various addressable fire alarm system components from Vedard Security Alarm Technology, including smoke detectors, heat detectors, manual call points, sound and light sirens, input modules, isolator modules, input/output modules, fire repeater panels, programmers, and 1-loop and 2-loop fire alarm control panels. Prices range from $8-65 for individual components and $430-630 for fire alarm control panels depending on the number of detection points (loops).
FTM20 - FTM21
The document provides technical specifications for the Soliphant T FTM20/FTM21 vibrating rod limit switch, including dimensions, electrical connection details, application in monitoring bulk solids levels in silos, and pricing information. The switch uses a piezoelectric drive to excite a vibrating rod, and electronics compare the rod's actual vibration amplitude to determine if it is covered by material or exposed. The switch is suitable for use in hazardous areas and has IP66/67 ingress protection.
Recommended
TMT80
The document provides product information for the iTemp TMT80 programmable head transmitter, including an overview of its application and functions, technical specifications and dimensions, details on electrical connection and pricing, and contact information for the manufacturer. The TMT80 can be used with various temperature sensors and has a 4-20 mA output, with its measuring range configurable via software. It is suitable for installation in a sensor head and provides accurate temperature measurement and transmission of signals.
Hsm20g datasheet
The HSM-20G humidity sensor module converts relative humidity to a standard voltage output between 1.0-3.0V. It is suitable for applications like humidifiers, dehumidifiers, air conditioners, and automotive climate control. The module has an operating humidity range of 20-95% RH with an accuracy of ±5% RH, and can operate between 0-50°C. It undergoes tests like impact, vibration, temperature cycling and humidity exposure to ensure reliability.
TMR35
The document provides technical specifications for the Easytemp TMR35 hygienic compact thermometer. Key details include:
- It measures temperature from -50 to +200°C with accuracy under 0.08% and fast response times under 2 seconds.
- Process connections include clamp, threaded, and hygienic styles with wetted parts made of 316L stainless steel.
- Electrical output is either a 4-20mA signal or Pt100 sensor. It has an IP66-rated housing and connects via an M12 connector.
- Dimensions, technical data, installation instructions and pricing are provided for configuration and purchase.
Alarm System/Home Alarm/Independent Gas Leakage Detector with Wired networkin...
The ALF-G031 is a ceiling-mounted, wired gas leakage detector that detects LPG and natural gas. It has relay, sound, light and electromagnetic pulse alarms and meets Chinese and European safety standards. The detector operates at 220V AC, alarms at 10% gas levels, and includes accessories like electromagnetic valves or manipulators.
Kidde Alarmline SenseTek-NL
The KIDDE Alarmline LWM-1 Linear
Heat Detection System allows early
detection of fire or overheating. It is
especially suited for confined areas or harsh
environments where adverse ambient
conditions cause other detection devices to
be unreliable or difficult to use.
The system consists of two components: the
sensor cable and the Alarmline control unit
LWM-1.
Gic india
General Industrial Controls Pvt ltd started operations in 1972 as manufacturers of hour-meter, time switches, Relays: voltage monitoring, thermistor, earth leakage, temperature controller, light energy management system, and injection molded plastic components.
Supply Monitoring Devices Series SM175
Features:
● Compact 17.5 mm wide.
● Multi-voltage from 3 x 208 to 3 x 480 V.
● Controls correct sequence of three phases & own supply voltage.
● LED indication for all faults & for change in settings during run time for better security.
● 1 C/O configuration.
● Selectable Under voltage / Over voltage / Asymmetry levels.
● Adjustable time delay.
Addressable fire system pricelist(fw) vedard
This document provides pricing information for various addressable fire alarm system components from Vedard Security Alarm Technology, including smoke detectors, heat detectors, manual call points, sound and light sirens, input modules, isolator modules, input/output modules, fire repeater panels, programmers, and 1-loop and 2-loop fire alarm control panels. Prices range from $8-65 for individual components and $430-630 for fire alarm control panels depending on the number of detection points (loops).
FTM20 - FTM21
The document provides technical specifications for the Soliphant T FTM20/FTM21 vibrating rod limit switch, including dimensions, electrical connection details, application in monitoring bulk solids levels in silos, and pricing information. The switch uses a piezoelectric drive to excite a vibrating rod, and electronics compare the rod's actual vibration amplitude to determine if it is covered by material or exposed. The switch is suitable for use in hazardous areas and has IP66/67 ingress protection.
IGBT Based Static Voltage Regulator
Prima's Static Voltage Regulator is an IGBT-based PWM voltage regulator with tight regulation and fast correction speed of 4000 V/Sec. It has a compact size, silent operation with no moving parts, and is maintenance-free. It can be used for applications such as hospitals, hotels, commercial buildings, industries, and more. It regulates the voltage through IGBT switching without harmonic distortion and maintains a pure sine wave output.
CMA10YT900D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 280mA and typical inductance values ranging from 1.0 to 1.2μH.
2. Mechanical dimensions and test conditions including a rated voltage of 20V and operating temperature range of -25 to 85 degrees Celsius.
3. Identification information like the part number, manufacturer contact information, and date code for quality approval.
DIN Rail Mount Tachometer for Process Measurement and Control
Input frequency pulses from various pickup devices are converted into an analog output signal that can be used for control or alarm purposes.
Magnetostrictive level transmitter added to magnetic level gauge
The MGT-6000 is a magnetostrictive level transmitter designed for magnetic liquid level indicators. It uses magnetostriction to measure the position of a magnetic float along a sensing wire, calculating the float position from the time between start and end pulses. Key features include high accuracy, a low-profile waveguide, HART communication, and an explosion proof housing. It can be mounted to most magnetic level indicators and provides a stable 4-20 mA output.
Laser based level transmitter for industrial process measurement
Jogler is a Baton Rouge, Louisiana manufacturer of high quality Magnetic Level Gauges, Magnetostrictive Transmitters, Direct-Reading Level Gauges with armored shield, Sight Flow Indicators, Specific Gravity Analyzers, Point Level Switches and other accessories. Jogler products are custom designed to meet customer specifications and manufactured to applicable ASME B31.1 and B31.3 code requirements to ensure reliable operation and maintenance free design.
PTP35
The document provides technical specifications for the Ceraphant T PTP35, a hygienic pressure switch for monitoring pressures in applications like food and beverage. It lists the switch's features such as stainless steel housing, pressure ranges from vacuum to 40 bar, and electrical outputs. Price tables are included showing pricing that decreases as more units are ordered.
CMA10YT750D SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 20V Typ, a DCR of 0.4Ω Max, and a cut-off frequency of 7.5 GHz Typ.
2. Current characteristics such as a maximum current of 300 mA.
3. Mechanical dimensions and other item specifications.
Catalog mikro mikro mk203a-dienhathe.vn
The document provides technical specifications for an overcurrent relay rated for 5 amps at 50 Hz. It can monitor currents from 2.0 to 6.0 amps and has adjustable settings for time multiplier and high-set pickup. The relay has indicators and contacts for trip signaling and mounts in a 96x96mm panel. It is designed to protect electrical systems according to IEC standards and operate in temperatures from -5°C to 55°C.
Msr adt-03-3430-benzene-gas-sensor
ALVI Automation Gas Alarm System offer MSR Germany Benzene in Indian Market
which helps in detecting and analysing the combustible and toxic gases.
CMA10YT600D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 300mA and typical inductance values ranging from 1.2uH to 1.0uH.
2. Mechanical dimensions and allowed tolerances.
3. Testing requirements such as a rated operational temperature range of -25°C to 85°C.
4. Manufacturing details like markings and manufacturer contact information.
CMA10YT900E SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a rated voltage of 20V and maximum current of 280mA.
2. Mechanical dimensions and a marking of "N/A".
3. Test conditions including a temperature range of -25°C to 85°C.
Htc digital multimeter dm 88
This document summarizes the features and specifications of the DM-88 digital multimeter. It can measure DC and AC voltage and current, resistance, capacitance, frequency, temperature, and has special functions like logic testing, diode and transistor testing, continuity testing, and auto power off. Measurements are displayed on a large LCD screen. It operates on 2 AAA batteries and has basic accuracy of 0.5% + digits for DC voltage and 1% + digits for DC current.
Head Mounted Temperature Transmitter
NK Instruments Pvt. Ltd. has BAUMER make Head Mounted Temperature Transmitters. These Temperature transmitters are available with 4 to 20 mA output or, RS 232 also.
Radar Level Transmitter for Liquids
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
Radar Level Transmitter for Solids
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
constant current led triac dimming driver
Golden Supplier 40-240VAC 350mA 1 channel Triac Constant Current Dimmable Driver DIM6001 with high quality and competitive price.
CMA05YT900D SPEC
1. The document provides specifications for an electronic component including its electrical characteristics, mechanical dimensions, and markings.
2. Key specifications include an impedance of 90Ω ±25% at 100MHz, a maximum DCR of 0.3Ω, and operating temperatures between -25°C to 85°C.
3. The frequency response graph shows the component has an impedance of 90Ω ±25% from 1MHz to 1000MHz.
FSR05KT6R8 SPEC 20141219
This document provides specifications for an inductor including its part number, mechanical dimensions, electrical characteristics, operational temperature range, and test values for inductance, DC resistance, and self resonant frequency. It also lists the manufacturer's name, address, and date. Key specifications include an inductance of 6.8uH ±10%, DCR below 2.15Ω, SRF above 55MHz, and maximum operating current of 300mA from -40°C to 85°C.
DTT35
The document provides technical specifications for the Flowphant T DTT35 flow switch, including:
- It measures the mass flow of liquids from 0.1 to 9.84 ft/s using a calorimetric measurement method.
- It has IP65 protection, outputs include 1 or 2 PNP switches or 1 PNP switch with 4-20mA output, and operates from 18-30VDC.
- Dimensions and process connections include options for clamp, varivent, and DIN11851 fittings from 1-2" and sensor lengths of 30, 50, or 100mm.
- It is available from E-direct starting at $427 for quantities of 11-35 units.
CMA05YT900E SPEC
The document provides specifications for an approved sample including:
1. Electrical characteristics with typical and maximum values for impedance, DCR, cutoff frequency, and current.
2. Mechanical dimensions in millimeters for 5 items labeled A through E.
3. Testing conditions including rated voltage, operating temperature range, and minimum insulation resistance.
Gst301
The GST301 gas extinguishing control panel has primary and standby cylinder switches to easily transfer gas supply. It displays a countdown timer for the time before gas release, adjustable from 0-90 seconds. The panel has 3 fire detection zones, two for double knock gas extinguishing and one auxiliary zone. It provides automatic and manual gas control, timer functions, and is compatible with GST detectors and accessories. The panel operates on 220VAC and has backup battery power.
C 9317
This document provides specifications for the C-9317 Emergency Start/Abort Switch, which is used to control the start and stop of gas extinguishing systems. It operates between 14-22Vdc with standby and alarm currents of 0.0mA and 25mA respectively. It has a normally open output contact rated for 60Vdc 0.1A and contact resistance below 100mOhm. The switch uses red LED indicators and ABS material, and can be manually reset. It is compatible with GST series gas extinguishing control panels.
More Related Content
What's hot
IGBT Based Static Voltage Regulator
Prima's Static Voltage Regulator is an IGBT-based PWM voltage regulator with tight regulation and fast correction speed of 4000 V/Sec. It has a compact size, silent operation with no moving parts, and is maintenance-free. It can be used for applications such as hospitals, hotels, commercial buildings, industries, and more. It regulates the voltage through IGBT switching without harmonic distortion and maintains a pure sine wave output.
CMA10YT900D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 280mA and typical inductance values ranging from 1.0 to 1.2μH.
2. Mechanical dimensions and test conditions including a rated voltage of 20V and operating temperature range of -25 to 85 degrees Celsius.
3. Identification information like the part number, manufacturer contact information, and date code for quality approval.
DIN Rail Mount Tachometer for Process Measurement and Control
Input frequency pulses from various pickup devices are converted into an analog output signal that can be used for control or alarm purposes.
Magnetostrictive level transmitter added to magnetic level gauge
The MGT-6000 is a magnetostrictive level transmitter designed for magnetic liquid level indicators. It uses magnetostriction to measure the position of a magnetic float along a sensing wire, calculating the float position from the time between start and end pulses. Key features include high accuracy, a low-profile waveguide, HART communication, and an explosion proof housing. It can be mounted to most magnetic level indicators and provides a stable 4-20 mA output.
Laser based level transmitter for industrial process measurement
Jogler is a Baton Rouge, Louisiana manufacturer of high quality Magnetic Level Gauges, Magnetostrictive Transmitters, Direct-Reading Level Gauges with armored shield, Sight Flow Indicators, Specific Gravity Analyzers, Point Level Switches and other accessories. Jogler products are custom designed to meet customer specifications and manufactured to applicable ASME B31.1 and B31.3 code requirements to ensure reliable operation and maintenance free design.
PTP35
The document provides technical specifications for the Ceraphant T PTP35, a hygienic pressure switch for monitoring pressures in applications like food and beverage. It lists the switch's features such as stainless steel housing, pressure ranges from vacuum to 40 bar, and electrical outputs. Price tables are included showing pricing that decreases as more units are ordered.
CMA10YT750D SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 20V Typ, a DCR of 0.4Ω Max, and a cut-off frequency of 7.5 GHz Typ.
2. Current characteristics such as a maximum current of 300 mA.
3. Mechanical dimensions and other item specifications.
Catalog mikro mikro mk203a-dienhathe.vn
The document provides technical specifications for an overcurrent relay rated for 5 amps at 50 Hz. It can monitor currents from 2.0 to 6.0 amps and has adjustable settings for time multiplier and high-set pickup. The relay has indicators and contacts for trip signaling and mounts in a 96x96mm panel. It is designed to protect electrical systems according to IEC standards and operate in temperatures from -5°C to 55°C.
Msr adt-03-3430-benzene-gas-sensor
ALVI Automation Gas Alarm System offer MSR Germany Benzene in Indian Market
which helps in detecting and analysing the combustible and toxic gases.
CMA10YT600D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 300mA and typical inductance values ranging from 1.2uH to 1.0uH.
2. Mechanical dimensions and allowed tolerances.
3. Testing requirements such as a rated operational temperature range of -25°C to 85°C.
4. Manufacturing details like markings and manufacturer contact information.
CMA10YT900E SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a rated voltage of 20V and maximum current of 280mA.
2. Mechanical dimensions and a marking of "N/A".
3. Test conditions including a temperature range of -25°C to 85°C.
Htc digital multimeter dm 88
This document summarizes the features and specifications of the DM-88 digital multimeter. It can measure DC and AC voltage and current, resistance, capacitance, frequency, temperature, and has special functions like logic testing, diode and transistor testing, continuity testing, and auto power off. Measurements are displayed on a large LCD screen. It operates on 2 AAA batteries and has basic accuracy of 0.5% + digits for DC voltage and 1% + digits for DC current.
Head Mounted Temperature Transmitter
NK Instruments Pvt. Ltd. has BAUMER make Head Mounted Temperature Transmitters. These Temperature transmitters are available with 4 to 20 mA output or, RS 232 also.
Radar Level Transmitter for Liquids
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
Radar Level Transmitter for Solids
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
constant current led triac dimming driver
Golden Supplier 40-240VAC 350mA 1 channel Triac Constant Current Dimmable Driver DIM6001 with high quality and competitive price.
CMA05YT900D SPEC
1. The document provides specifications for an electronic component including its electrical characteristics, mechanical dimensions, and markings.
2. Key specifications include an impedance of 90Ω ±25% at 100MHz, a maximum DCR of 0.3Ω, and operating temperatures between -25°C to 85°C.
3. The frequency response graph shows the component has an impedance of 90Ω ±25% from 1MHz to 1000MHz.
FSR05KT6R8 SPEC 20141219
This document provides specifications for an inductor including its part number, mechanical dimensions, electrical characteristics, operational temperature range, and test values for inductance, DC resistance, and self resonant frequency. It also lists the manufacturer's name, address, and date. Key specifications include an inductance of 6.8uH ±10%, DCR below 2.15Ω, SRF above 55MHz, and maximum operating current of 300mA from -40°C to 85°C.
DTT35
The document provides technical specifications for the Flowphant T DTT35 flow switch, including:
- It measures the mass flow of liquids from 0.1 to 9.84 ft/s using a calorimetric measurement method.
- It has IP65 protection, outputs include 1 or 2 PNP switches or 1 PNP switch with 4-20mA output, and operates from 18-30VDC.
- Dimensions and process connections include options for clamp, varivent, and DIN11851 fittings from 1-2" and sensor lengths of 30, 50, or 100mm.
- It is available from E-direct starting at $427 for quantities of 11-35 units.
CMA05YT900E SPEC
The document provides specifications for an approved sample including:
1. Electrical characteristics with typical and maximum values for impedance, DCR, cutoff frequency, and current.
2. Mechanical dimensions in millimeters for 5 items labeled A through E.
3. Testing conditions including rated voltage, operating temperature range, and minimum insulation resistance.
What's hot (20)
DIN Rail Mount Tachometer for Process Measurement and Control
DIN Rail Mount Tachometer for Process Measurement and Control
Magnetostrictive level transmitter added to magnetic level gauge
Magnetostrictive level transmitter added to magnetic level gauge
Laser based level transmitter for industrial process measurement
Laser based level transmitter for industrial process measurement
Viewers also liked
Gst301
The GST301 gas extinguishing control panel has primary and standby cylinder switches to easily transfer gas supply. It displays a countdown timer for the time before gas release, adjustable from 0-90 seconds. The panel has 3 fire detection zones, two for double knock gas extinguishing and one auxiliary zone. It provides automatic and manual gas control, timer functions, and is compatible with GST detectors and accessories. The panel operates on 220VAC and has backup battery power.
C 9317
This document provides specifications for the C-9317 Emergency Start/Abort Switch, which is used to control the start and stop of gas extinguishing systems. It operates between 14-22Vdc with standby and alarm currents of 0.0mA and 25mA respectively. It has a normally open output contact rated for 60Vdc 0.1A and contact resistance below 100mOhm. The switch uses red LED indicators and ABS material, and can be manually reset. It is compatible with GST series gas extinguishing control panels.
Pulse amplitude modulation
The document provides instructions for 14 experiments in analog communications lab, including voltage feedback amplifier, amplitude modulation and demodulation, class A power amplifier, RC phase shift oscillator, Hartley and Colpitts oscillators, complementary symmetry push-pull amplifier, DSBSC modulation and demodulation, SSBSC modulation and demodulation, frequency modulation and demodulation, pre-emphasis - de-emphasis circuits, verification of sampling theorem, PAM and reconstruction, PWM and PPM generation and reconstruction, and the effect of noise on communication channels. The experiments are designed to help students learn important concepts in analog signal processing and analog communications systems.
Contaminación ambiental diapositivas para mandar ok
Este documento trata sobre la contaminación ambiental. Define la contaminación ambiental y explica que puede surgir de fuentes naturales o antropogénicas. Identifica varios agentes contaminantes como sustancias químicas, residuos, petróleo y radiaciones. Describe los tipos principales de contaminación como la del agua, suelo y aire, explicando sus causas y efectos en la salud y el medio ambiente.
Taller 1
Este documento contiene las respuestas de una persona llamada Yoneider Lesmes a preguntas sobre sistemas informáticos. Se define una computadora como un sistema capaz de procesar información a partir de programas. Herman Hollerith inventó la máquina tabuladora que usaba tarjetas perforadas para tabular datos más rápido durante el censo estadounidense de 1890. Más adelante, se mencionan las primeras generaciones de computadores y sus características, incluyendo el primer proyecto de computadora de Alan Turing en 1937 y el primer comput
Reflexiones
Las TIC's son herramientas que facilitan el tratamiento y acceso a la información para comunicarnos y almacenar datos. En la educación, las TIC's tienen ventajas como permitir el aprendizaje cooperativo y desarrollar habilidades tecnológicas, pero también desventajas como requerir actualizaciones costosas y distraer a los estudiantes. Las TIC's más comunes en la educación son las computadoras, internet y videos educativos.
Selección de tecnología educativa
Este documento compara el conductismo y el constructivismo como teorías del aprendizaje. Explica que el conductismo de Skinner se basa en el aprendizaje por refuerzo y castigo, mientras que las teorías constructivistas como las de Piaget enfatizan el aprendizaje a través de la experiencia y la resolución de problemas. También describe las diferencias clave entre el enfoque cognitivo y el constructivista.
Gerdau - II Encontro Ações da Rede
O documento descreve um programa de capacitação profissional em execução de armações de aço e serralheria patrocinado pelo Instituto Gerdau e em parceria com o SENAI e Sindscon. O programa tem como objetivos desenvolver profissionais especializados na construção civil, aperfeiçoar quem já atua nessa área e criar oportunidades para jovens. Em 2011, foram realizadas 3 turmas piloto em Porto Alegre e 4 turmas adicionais em outros estados, totalizando 64 alunos e 228 horas de aula.
Entegable fase 1 ok
Este documento presenta el desarrollo de la primera fase del módulo intermedio de alfabetización informacional de la Biblioteca de la Universidad de La Salle. En esta primera fase se introducen las definiciones básicas de herramientas tecnológicas como gestores bibliográficos, repositorios, bases de datos especializadas y recursos de información. Adicionalmente, se propone una estrategia didáctica de "caza del tesoro" para aplicar de manera práctica los conocimientos adquiridos.
Tipos de empresas copia
Este documento describe los diferentes tipos de empresas según su actividad y función. Identifica empresas industriales como extractivas, manufactureras y de producción; comerciales como mayoristas y minoristas; de servicios como de transporte, financieras, públicos y privados; y otras como las productoras de materias primas, de bienes intelectuales, inversiones, educación, salud y construcción.
Instituto tegnologico yola
Este documento describe los pasos del proceso de investigación básica. Explica que la investigación es un proceso sistemático que utiliza el método científico para obtener información confiable con el fin de entender y aplicar conocimientos. Luego detalla los pasos clave de la investigación como la elección del tema, la formulación de objetivos, la delimitación del tema y el planteamiento del problema. Finalmente, proporciona detalles sobre cómo llevar a cabo cada uno de estos pasos de manera efectiva.
Evidencias de natalia tello y jessica velasco !!
El documento presenta evidencia de dos personas, Natalia Tello y Jessica Velasco.
I te c construmat 2011
El Instituto de Tecnología de la Construcción de Cataluña (ITeC) genera contenido técnico y bases de datos para fabricantes, empresas privadas y la administración pública. Proporciona aplicaciones informáticas, cursos y certificaciones de productos y empresas. Sus principales bases de datos disponibles públicamente son metaBase, Banco BEDEC, Entidades, Empresas, Registro de Materiales, Marcado CE y CEC/CTE.C, las cuales contienen información técnica, precios y características de miles de productos de la construcción. ITe
Características de la información para la Gestión
Este documento describe los requisitos para que la información sea útil para la toma de decisiones y el control de gestión. Debe ser pertinente, confiable, sistémica, clara y comparable, sujetos a oportunidad, eficiencia y practicabilidad. Estos requisitos garantizan que la información sea relevante, creíble, ordenada orgánicamente, comprensible y confrontable.
Euroconstruct smopyc i te c 3_04_2014
Este documento presenta las previsiones de Euroconstruct para los mercados de construcción en Europa entre 2014 y 2016. Se espera un crecimiento moderado del sector del 0.9% en 2014 hasta el 2.7% en 2016. Los países mostrarán diferentes tasas de crecimiento, desde una contracción en España hasta un fuerte crecimiento en Irlanda e Irlanda. Sin embargo, las altas tasas de crecimiento no necesariamente indican una situación económica sólida, mientras que las bajas tasas pueden ocultar mercados estables.
Tema 2
Este documento presenta una introducción a la historia de la cultura física. Explica que el estudio de la historia permite entender mejor el presente y evitar repetir errores del pasado. Luego describe la importancia de conocer la historia de la educación física para los maestros, ya que les ayuda a comprender el estado actual y prever tendencias futuras. Finalmente, resume la actividad física en la época primitiva, la cual estaba enfocada en la supervivencia a través de la caza y el baile para la comunicación.
Presentación Rocío Dúrcal
Rocío Dúrcal fue una cantante y actriz española conocida como "La Reina de las Rancheras". Vendió más de 100 millones de discos y fue galardonada con el Grammy Latino a la Excelencia Musical en 2005. Nació en Madrid en 1944 y creció en una familia obrera de seis hijos, donde tuvo que ayudar con las labores domésticas desde temprana edad. Desde pequeña mostró su talento para el canto a pesar de la oposición inicial de sus padres a que hiciera carrera artística.
Historia de la evolucion
Este documento describe la historia del almacenamiento y procesamiento de datos, desde los primeros métodos manuales usados por los babilonios, egipcios y romanos, hasta el desarrollo de las primeras máquinas como la calculadora pascalina y la máquina analítica de Babbage. Luego se describen hitos importantes como la creación de las primeras computadoras electrónicas como Colossus, ENIAC y UNIVAC, y el desarrollo de los primeros ordenadores personales como el Apple II.
Uqp i te_c_2012_oct
El documento habla sobre la certificación de productos innovadores por parte del Instituto de Tecnología de la Construcción de Cataluña (ITeC). El ITeC ofrece servicios de certificación como el Documento de Aptitud Técnica (DAU) y el Documento Técnico de Idoneidad (DITE) para productos innovadores. Estos documentos evalúan las prestaciones del producto y su cumplimiento con los requisitos reglamentarios, y pueden conducir al marcado CE para la comercialización del producto. El ITeC también
Expresión oral y escrita
El documento describe diferentes formas de expresión como la expresión literaria, artística y corporal. Explica formas de expresión lingüística como la descripción, narración, argumentación y exposición. También cubre la expresión oral y escrita, estrategias para mejorar la expresión y funciones de comunicación lingüística.
Viewers also liked (20)
Contaminación ambiental diapositivas para mandar ok
Contaminación ambiental diapositivas para mandar ok
Similar to C 9318
C 9103
Aditgroup present the different fire alarm detector for the security purpose. Here user gets the Duel Heat detector, Manual call point, Smoke Alarm, Optical smoke detector etc.
T switch - att11-endress+hauser datasheet-thermal flow switch
T switch - att11-endress+hauser datasheet-thermal flow switch - Endress+Hauser - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
C 9104
Aditgroup present the different fire alarm detector for the security purpose. Here user gets the Duel Heat detector, Manual call point, Smoke Alarm, Optical smoke detector etc.
Gst rp16
The GST-RP16 is a 16 zone conventional fire repeater panel that displays fire alarm signals from compatible control panels. It operates between 18-28Vdc, has a standby current of 12mA and alarm current of 60mA, and can operate between 0-40°C. The panel indicates 16 zone fire signals and 2 fault signals on a 280x110x46mm display and connects to the control panel with wiring for 16 zone signals, 2 fault signals, and a power supply.
9101
The C-9101Ex explosion proof combined heat and photoelectric smoke detector has several key features:
1. It can detect smoke and heat in hazardous areas requiring explosion proof equipment, and connects to fire alarm panels and devices via an I-9332Ex interface module.
2. The detector has a dust proof sensing chamber, low profile design, LEDs for 360 degree visibility, and operates between -10 to 40 degrees Celsius.
3. It is installed using a standard electrical box and compatible with GST fire alarm panels, interfaces, detectors, and call points for processing alarm signals.
Monicon brochure
The document describes several gas monitoring devices:
- The 4 Channel Gas Monitor is a wall-mounted unit that monitors up to 4 toxic gases, combustible gases, or oxygen levels with displays and alarms.
- The Multichannel Gas Monitor is a rack-mounted system compatible with up to 16 sensors for monitoring multiple gas channels.
- The IR80 CO2 Gas Monitor is a standalone or networked monitor for carbon dioxide levels with alarms and calibration assistance.
C 9202
Aditgroup present the different fire alarm detector for the security purpose. Here user gets the Duel Heat detector, Manual call point, Smoke Alarm, Optical smoke detector etc.
Detectomat Fire Alarm Systems in India by Monsher
Monsher brings you the technologically advanced Detectomat Fire Alarm Systems in India by collaborating with the German giant Jobs Group, that has earned VDS approval and controls 98% of the world’s sprinkler production. For more information, visit us at: http://monsher.com/product.html
C 9317
This document provides specifications for the C-9317 Emergency Start/Abort Switch, which is used to control the start and stop of gas extinguishing systems. It operates between 14-22Vdc with standby and alarm currents of 0.0mA and 25mA respectively. It has a normally open output contact rated for 60Vdc 0.1A and contact resistance below 100mΩ. The switch uses red LED indicators and ABS material, and can be manually reset. It is compatible with GST series gas extinguishing control panels.
RIVPF_GB_LOCAL
This document describes an IR flame detector model RIV-601P/F and RIV-601P/FA. It provides specifications for the detectors such as operating voltage, current draw, alarm delay time, output relay, temperature range, dimensions, approvals. The RIV-601P/FA model adds an explosion-proof enclosure. Accessories include variable direction stands for adjusting the detector angle horizontally and vertically.
9103
The C-9103Ex explosion proof dual heat detector features fixed temperature and rate-of-rise detection using a twin LED for 360 degree visibility. It operates between -10 to 40 degrees Celsius at 12-24V DC with low current draw and IP53 enclosure protection. The detector connects to an I-9332Ex interface module to interface with fire alarm panels and can monitor areas up to 30 square meters in height up to 8 meters.
Gst108 116 1
The GST108 and GST116 are conventional fire alarm control panels that provide eight or sixteen zones of fire detection, respectively. They are microprocessor controlled and comply with relevant standards. Key features include repeater panel interface, support for both end of line resistors and active end of line devices, programmable sounder outputs, and zone isolation and testing controls. The panels also offer facilities for remote control and indication of system status. They are suitable for standalone use or integration into larger systems.
Gst108 116
The GST108 and GST116 are conventional fire alarm control panels that provide eight or sixteen zones of fire detection, respectively. They are microprocessor controlled and comply with relevant standards. Key features include repeater panel interface, support for both end of line resistors and active end of line devices, programmable sounder outputs, and zone isolation and testing controls. The panels also offer facilities for remote control and indication of system status. They are suitable for standalone use or integration into larger systems.
4903-0010 - Conventional Strobe with Horn.pdf
This document provides information on wall mount audible and visible notification appliances that operate on a two-wire SmartSync circuit. Key features include horns and strobes that can be controlled separately, compatibility with ADA requirements, and operation at 1Hz flash rate when connected in a SmartSync circuit. The appliances are available in different housing colors and strobe output levels, and include installation accessories. They combine an electronic horn and strobe in a compact and easy to install package suitable for fire alarm applications.
C 9401
Aditgroup present the different fire alarm detector for the security purpose. Here user gets the Duel Heat detector, Manual call point, Smoke Alarm, Optical smoke detector etc.
Electronic units and systems for armored vehicles
The document describes several electronic units and systems used for armored vehicles, including:
- The DRG-T Radiation Survey Device which continuously measures gamma radiation exposure and provides alarms to activate protection equipment.
- The PPO Fire Protection Equipment System which detects engine compartment fires and automatically suppresses fires through thermal detectors, audio/visual alarms, and releasing an extinguishing agent.
- The BP PPO Unit-Panel which controls the fire protection system and provides alarms in the event of a fire.
LEDGEAR one4all ENEC approved driver specification
• One4all design(DALI-2, Push-DIM, 0-10V, 10V PWM)
• DALI member, compatible with universal DALI masters
• Tested in DALI house according to IEC 62386 Part 101,102(DALI-2), 207
• ENEC, CE, CB approved by TUV SUD, SAA, Ctick qualified
• Adjustable constant current output from 650 to 1100 mA(Preselected 650mA), and 250mA to 600mA(Preselected 250mA)
• Reliable, Class II, SELV according EN 61347
• Independent ECG and with strain-relief.
• Permissible AC cable 0.5-1.5mm² wire gauge, 3.5~8mm PVC jacket diameter
• Working Ta=-25°C ~ +45°C
• 50,000 hrs nominal lifespan
• 5-year factory guarantee
• Flicker Free(less than 3% flicker percentage)
• Built-in active PFC
• Built--in with permanent memory for DALI and Push-DIM, 100,000 times memory
• Grow wire tested 650° for 30S and 850° for 5S
• Push-DIM, from 100% to 1.5% dimming range
Micro e systems_mte_ds_datasheet
The MTETM Series Encoders are compact linear encoders that offer high performance in small spaces. They have a miniature sensor, use little power, and install easily without tools by mounting directly onto a narrow adhesive-backed tape scale. The encoders provide high resolution, accuracy, and a status LED to indicate health.
Firelaser-datasheet-SenseTek Glasvezel detectie
De FireLaser is het hart van het branddetectiesysteem. Glasvezeltechniek kent een grote vlucht in brandbeveiliging. SenseTek is de distributeur van Bandweaver glasvezel branddetectie. Het systeem voldoet aan de Nederlandse wetgevingen en eisen. Het systeem heeft dan ook de EN54-22 keur. Juist voor grotere projecten alsook parkeergarages is deze glasvezeltechniek een efficiënte oplossing. SenseTek is specialist op het gebied van branddetectie. vraag vrijblijvend naar de voordelen van glasvezel. www.sensetek.nl sales@sensetek.nl of 020-6131611
Gst fire alarm system ver.2010
GST is a leading fire alarm system provider in China. It was founded in 1993 and has become the largest provider in China by market share and sales revenue. UTC Fire & Security acquired a stake in GST in 2006 and fully merged with the company in 2009 to provide comprehensive fire safety solutions globally under various brands including GST. GST manufactures over 7 million detectors and 30,000 control panels annually, applying strict quality standards. It has obtained certification from various international bodies and has a global product distribution network.
Similar to C 9318 (20)
T switch - att11-endress+hauser datasheet-thermal flow switch
T switch - att11-endress+hauser datasheet-thermal flow switch
LEDGEAR one4all ENEC approved driver specification
LEDGEAR one4all ENEC approved driver specification
More from Adit Group
More from Adit Group (20)
C 9318
- 1. Gas Extinguishing Warning Indicatior C-9318 Technical Specifications • • • • • • • • • Features and Benefits 1. 2. 3. 4. 5. Normally installed above the entrance to a gas extinguishing control area. Will eliminate and activate internal sounder prior to gas release. "Gas Extinguishing DO NOT ENTER" is printed on the panel of the indicator. Highlight LED Compatible with GST series of gas extinguishing control panel Operating voltage: 24Vdc (20Vdc to 28Vdc) polarized Operating Current: Alarm: 100mA Operating temperature: -10°C to +50°C Relative humidity: 95% Indicators: 16 Highlights Red LED, constantly lit when alarm Application: Indoor use Material and colour: ABS, Red Wiring: 1 pair polarized Dimensions: 280m×110mm×46mm Wiring and Connection Connect the wires to the required terminal according to the diagram. The cable must be fire rated type and the size depends on the distance and application. Minimum size gauge 1.0mm²(18 AWG). See installation and operation for more information. 1 PAIR FIRE CABLE Selection of compatible Control Panels Compatible with all GST Conventional and Addressable Gas Extinguishing Control System. GAS EXTINGUISHING CONTROL PANEL XT2 WARNING INDICATOR A Gas XT1 DO NOT WARNING INDICATOR B G1, R1 (XT1): To DC24V or GND, R terminal of extinguishing control panel, polarized. G2, R2 (XT2): Connecting with gas extinguishing warning indicator in series or with 4.7kΩresistor. Ordering Information: Part No C-9318 Description Gas Extinguishing Warning Indicator Weight /Kg 0.850 XT2 G2 R2 XT1 G1 R1 Gas DO NOT G2 R2 C-9318 Gas Extinguishing Warning Indicator is the accessory equipment of a gas extinguishing system. It's usually installed at the entrance of the protected area. After gas is released, the controller will activate the indicator to give visual indication warning people in field to take relative measures. This indicator is non-addressable and is used together with extinguishing control panel. G1 R1 Description Pack Qty per Box 1 Note: Specifications are subject to change without notice.