FSR05KT6R8 SPEC 20141219
•
0 likes•40 views
This document provides specifications for an inductor including its part number, mechanical dimensions, electrical characteristics, operational temperature range, and test values for inductance, DC resistance, and self resonant frequency. It also lists the manufacturer's name, address, and date. Key specifications include an inductance of 6.8uH ±10%, DCR below 2.15Ω, SRF above 55MHz, and maximum operating current of 300mA from -40°C to 85°C.
Report
Share
Report
Share
Download to read offline
Recommended
HNT2510MT2R2 SPEC 20140516
This document provides specifications for an electronic component, including mechanical dimensions, electrical characteristics, and test conditions. It lists items like inductance, DCR, current rating, and operating temperature range. It also provides measurements taken like inductance values and notes packaging markings and part number identification for the approved sample.
ML02ST4N7 SPEC
This document provides specifications for an inductor component including electrical characteristics, mechanical dimensions, and marking. Key specifications include an inductance of 4.7nH ± 0.3nH, self-resonant frequency of 7010 MHz typical and 6000 MHz minimum, DC resistance of 0.11Ω typical, and maximum operating temperature of -55°C to 125°C. Contact and product number information is also listed for the Taiwanese manufacturer.
CMA05YT900D SPEC
1. The document provides specifications for an electronic component including its electrical characteristics, mechanical dimensions, and markings.
2. Key specifications include an impedance of 90Ω ±25% at 100MHz, a maximum DCR of 0.3Ω, and operating temperatures between -25°C to 85°C.
3. The frequency response graph shows the component has an impedance of 90Ω ±25% from 1MHz to 1000MHz.
HNT2510MT4R7 SPEC 20140307
This document provides specifications for an inductor component including:
1. Dimensions and tolerances for various measurements of the component.
2. Electrical characteristics including inductance, DC resistance, current ratings and operating temperature range.
3. Additional information on the manufacturer, part number, and test conditions.
CMA10YT750D SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 20V Typ, a DCR of 0.4Ω Max, and a cut-off frequency of 7.5 GHz Typ.
2. Current characteristics such as a maximum current of 300 mA.
3. Mechanical dimensions and other item specifications.
CMA10YT600D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 300mA and typical inductance values ranging from 1.2uH to 1.0uH.
2. Mechanical dimensions and allowed tolerances.
3. Testing requirements such as a rated operational temperature range of -25°C to 85°C.
4. Manufacturing details like markings and manufacturer contact information.
CMA10YT900D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 280mA and typical inductance values ranging from 1.0 to 1.2μH.
2. Mechanical dimensions and test conditions including a rated voltage of 20V and operating temperature range of -25 to 85 degrees Celsius.
3. Identification information like the part number, manufacturer contact information, and date code for quality approval.
CMA05YT900E SPEC
The document provides specifications for an approved sample including:
1. Electrical characteristics with typical and maximum values for impedance, DCR, cutoff frequency, and current.
2. Mechanical dimensions in millimeters for 5 items labeled A through E.
3. Testing conditions including rated voltage, operating temperature range, and minimum insulation resistance.
Recommended
HNT2510MT2R2 SPEC 20140516
This document provides specifications for an electronic component, including mechanical dimensions, electrical characteristics, and test conditions. It lists items like inductance, DCR, current rating, and operating temperature range. It also provides measurements taken like inductance values and notes packaging markings and part number identification for the approved sample.
ML02ST4N7 SPEC
This document provides specifications for an inductor component including electrical characteristics, mechanical dimensions, and marking. Key specifications include an inductance of 4.7nH ± 0.3nH, self-resonant frequency of 7010 MHz typical and 6000 MHz minimum, DC resistance of 0.11Ω typical, and maximum operating temperature of -55°C to 125°C. Contact and product number information is also listed for the Taiwanese manufacturer.
CMA05YT900D SPEC
1. The document provides specifications for an electronic component including its electrical characteristics, mechanical dimensions, and markings.
2. Key specifications include an impedance of 90Ω ±25% at 100MHz, a maximum DCR of 0.3Ω, and operating temperatures between -25°C to 85°C.
3. The frequency response graph shows the component has an impedance of 90Ω ±25% from 1MHz to 1000MHz.
HNT2510MT4R7 SPEC 20140307
This document provides specifications for an inductor component including:
1. Dimensions and tolerances for various measurements of the component.
2. Electrical characteristics including inductance, DC resistance, current ratings and operating temperature range.
3. Additional information on the manufacturer, part number, and test conditions.
CMA10YT750D SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 20V Typ, a DCR of 0.4Ω Max, and a cut-off frequency of 7.5 GHz Typ.
2. Current characteristics such as a maximum current of 300 mA.
3. Mechanical dimensions and other item specifications.
CMA10YT600D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 300mA and typical inductance values ranging from 1.2uH to 1.0uH.
2. Mechanical dimensions and allowed tolerances.
3. Testing requirements such as a rated operational temperature range of -25°C to 85°C.
4. Manufacturing details like markings and manufacturer contact information.
CMA10YT900D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 280mA and typical inductance values ranging from 1.0 to 1.2μH.
2. Mechanical dimensions and test conditions including a rated voltage of 20V and operating temperature range of -25 to 85 degrees Celsius.
3. Identification information like the part number, manufacturer contact information, and date code for quality approval.
CMA05YT900E SPEC
The document provides specifications for an approved sample including:
1. Electrical characteristics with typical and maximum values for impedance, DCR, cutoff frequency, and current.
2. Mechanical dimensions in millimeters for 5 items labeled A through E.
3. Testing conditions including rated voltage, operating temperature range, and minimum insulation resistance.
CMA10YT900E SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a rated voltage of 20V and maximum current of 280mA.
2. Mechanical dimensions and a marking of "N/A".
3. Test conditions including a temperature range of -25°C to 85°C.
FSR03KT4R7-H SPEC 20170705
This document provides specifications for an inductor component including its part number, electrical characteristics, mechanical dimensions, typical test values, and operating temperature range. Key specifications include an inductance of 4.7uH ±10% with a DCR between 0.89-0.97Ω and self resonant frequency above 51MHz. The inductor has a rated current of 420mA and is marked with a violet dot.
CMA05MT121 SPEC
This document provides specifications for an electronic component. It includes:
1) Measurements for items A through F in a table with units of mm and tolerances ranging from ±0.1 to ±0.2.
2) Electrical characteristics including insulation resistance of 10MΩ minimum, withstanding voltage of 125V typical, an operating temperature range of -25°C to 85°C, and a rated voltage of 50V typical.
3) Additional specifications for DCR at 100MHz/0.5V of 0.3Ω maximum, and a typical cut-off frequency of 1.0GHz.
HNT5040MT3R3 20160108
This document contains specifications for an electronic component. It includes:
1. Electrical characteristics such as current and inductance ratings.
2. Mechanical dimensions.
3. Manufacturing details like part number, manufacturer contact information, and approval specifications.
Catalog mikro mikro mk203a-dienhathe.vn
The document provides technical specifications for an overcurrent relay rated for 5 amps at 50 Hz. It can monitor currents from 2.0 to 6.0 amps and has adjustable settings for time multiplier and high-set pickup. The relay has indicators and contacts for trip signaling and mounts in a 96x96mm panel. It is designed to protect electrical systems according to IEC standards and operate in temperatures from -5°C to 55°C.
Catalog mikro mikro mk204a-dienhathe.vn
The document provides specifications for the MK204A overcurrent relay, including its ratings, auxiliary supply information, setting ranges, contact specifications, indicators, performance characteristics, mechanical details, environmental conditions, typical wiring diagram, and ordering information. The relay has adjustable settings for low-set and high-set overcurrent protection, with the low-set having an inverse definite time characteristic. It is intended for panel mounting and complies with relevant protection device standards.
Ultrasonic Level Transmitter ULT200H
Ultrasonic Level Indicator are suitable for measuring the Level if fluid in the tank by non contcat method.
The Instrument works on Sound Waves and the out put from the same ( 4 to 20 mA) is given to a Digital Level Indicator.
The instrument is suitable for Foam Free and fumes Free material only.
Types : 2-Wire Ultrasonic Level Transmitter & Self Compensating (3/4 Wire) Ultrasonic Level Transmitter
The salient features and specifications are as follow:
Simple push-button calibration (Accurate)
Output 4-20 mA / 20-4 mA
(Isolated on 4 Wire Model's only)
Built-in temperature compensation
Optional RS232 Or RS485 communications with calibration, diagnostics and data
logging software
PLC compatible
Three or Four Wire Operation
Self Cleaning operation of sensor face
APPLICATIONS
Solids (Models 25 U, 45U & 52U Below)
Solids Range Approx. ½ of liquid
C = Communication 4 for 485 or 2 for 232, Blank = no Communications
XX = Operating Frequency, U = Ultrasonic 400 = AC Power, 300 = DC Power
Magnetostrictive level transmitter added to magnetic level gauge
The MGT-6000 is a magnetostrictive level transmitter designed for magnetic liquid level indicators. It uses magnetostriction to measure the position of a magnetic float along a sensing wire, calculating the float position from the time between start and end pulses. Key features include high accuracy, a low-profile waveguide, HART communication, and an explosion proof housing. It can be mounted to most magnetic level indicators and provides a stable 4-20 mA output.
Laser based level transmitter for industrial process measurement
Jogler is a Baton Rouge, Louisiana manufacturer of high quality Magnetic Level Gauges, Magnetostrictive Transmitters, Direct-Reading Level Gauges with armored shield, Sight Flow Indicators, Specific Gravity Analyzers, Point Level Switches and other accessories. Jogler products are custom designed to meet customer specifications and manufactured to applicable ASME B31.1 and B31.3 code requirements to ensure reliable operation and maintenance free design.
Datasheet GC
This document provides product specifications for a female F-connector (GC CaP System F FEMALE CONNECTOR) for connecting coaxial cables. The connector is suitable for cables with inner diameters between 0.3-1.1mm, has a 75 ohm impedance rating up to 2GHz, and can withstand 500V and 5000M-ohm insulation resistance. It has a zinc-nickel plated body and bronze-nickel plated shrapnel. Each connector is sold with two CaPs and has an operating temperature range of -40 to 120 degrees Celsius.
DIN Rail Mount Tachometer for Process Measurement and Control
Input frequency pulses from various pickup devices are converted into an analog output signal that can be used for control or alarm purposes.
TMT80
The document provides product information for the iTemp TMT80 programmable head transmitter, including an overview of its application and functions, technical specifications and dimensions, details on electrical connection and pricing, and contact information for the manufacturer. The TMT80 can be used with various temperature sensors and has a 4-20 mA output, with its measuring range configurable via software. It is suitable for installation in a sensor head and provides accurate temperature measurement and transmission of signals.
Catalog mikro mikro mk201a-dienhathe.vn
This document provides technical specifications for an earth fault relay model MK201A. The relay has a rated current of 5A at 50Hz, with thermal withstand of 4 times rated current continuously. It has adjustable settings for low-set and high-set detection ranges, and contactors with a rated capacity of 5A at 250V AC. The relay complies with IEC 60255-26 standards and has microprocessor-based control and measurement of fundamental frequency current.
Moisture, Hydrogen, and Temperature Measurement in Electrical Transformers
Moisture, Hydrogen, and Temperature Measurement in Electrical TransformersAlliance Technical Sales, Inc.
Receive information on transformer fault situations with reliable and robust online transmitter. The Vaisala Moisture, Hydrogen and Temperature Transmitter MHT410 for Transformer Oil measures directly from representative transformer oil giving both reliable hydrogen trend as well as fast moisture data.
It is built to last and doesn’t have wearing parts such as membrane, pumps, hoses or batteries. Easy to install, the MHT410 is ready to use within minutes. Continuously monitoring hydrogen and moisture levels with an in-situ probe is the first step in extending the life of a transformer through implementation of predictive maintenance practices leading to lower total cost of ownership.System Sensor APA151
Buy the System Sensor APA151 at JMAC Supply.
https://www.jmac.com/System_Sensor_APA151_p/system-sensor-apa151.htm?=slideshare
宏信科技合金磁膠2X2,3X3系列規格
This document provides specifications for HT-TECH Corporation's HNT-E Series SMD power inductors. It includes dimensions, electrical characteristics like inductance and current ratings, ordering information formats, test equipment details, and packaging information for the surface mountable HNT2512-E and HNT3015-E inductors. Current vs. inductance graphs are provided for each part number showing specifications like saturation current.
Catalog mikro mikro mk232a-dienhathe.vn
This document provides technical specifications for the MK232A Earth Fault Relay. The relay has a rated current of 5A, operates at 50 or 60Hz, and has a thermal withstand of 4 times the rated current. It has settings for low-set and high-set detection of earth faults with time delays. The relay has contacts rated for 5A at 250V AC and indicators for power, pickup, and trip conditions. It is DIN rail mountable, measures 96x96x110mm, and is suitable for temperatures from -5°C to 55°C.
DTT35
The document provides technical specifications for the Flowphant T DTT35 flow switch, including:
- It measures the mass flow of liquids from 0.1 to 9.84 ft/s using a calorimetric measurement method.
- It has IP65 protection, outputs include 1 or 2 PNP switches or 1 PNP switch with 4-20mA output, and operates from 18-30VDC.
- Dimensions and process connections include options for clamp, varivent, and DIN11851 fittings from 1-2" and sensor lengths of 30, 50, or 100mm.
- It is available from E-direct starting at $427 for quantities of 11-35 units.
6 ep13322ba20 datasheet_en
This document provides specifications for the SITOP PSU100S 24 V/2.5 A stabilized power supply. It has an input voltage range of 85-132V or 170-264V and can output 24V DC at a maximum of 2.5A. Key features include overvoltage protection, adjustable output voltage, signaling relay for output status, and DIN rail mounting.
Karakteristik sensor
The document describes the characteristics of two sensors - a UVtron sensor (R2868) and an IR sensor (gp2y0a21yk sharp). For the UVtron sensor, it lists its transfer function, sensitivity range of 185 to 260 nm, span of -20 to +60, accuracy within 185 to 260 nm range, hysteresis, nonlinearity, noise of 30 Vpp, and resolution. For the IR sensor, it provides similar details on its transfer function, sensitivity range of 10 to 80cm, span of 24cm, accuracy of 0.3 cm, hysteresis, nonlinearity, noise of Vcc-0.3, resolution, and bandwidth range of 0.25-0.55 volt. Both
More Related Content
What's hot
CMA10YT900E SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a rated voltage of 20V and maximum current of 280mA.
2. Mechanical dimensions and a marking of "N/A".
3. Test conditions including a temperature range of -25°C to 85°C.
FSR03KT4R7-H SPEC 20170705
This document provides specifications for an inductor component including its part number, electrical characteristics, mechanical dimensions, typical test values, and operating temperature range. Key specifications include an inductance of 4.7uH ±10% with a DCR between 0.89-0.97Ω and self resonant frequency above 51MHz. The inductor has a rated current of 420mA and is marked with a violet dot.
CMA05MT121 SPEC
This document provides specifications for an electronic component. It includes:
1) Measurements for items A through F in a table with units of mm and tolerances ranging from ±0.1 to ±0.2.
2) Electrical characteristics including insulation resistance of 10MΩ minimum, withstanding voltage of 125V typical, an operating temperature range of -25°C to 85°C, and a rated voltage of 50V typical.
3) Additional specifications for DCR at 100MHz/0.5V of 0.3Ω maximum, and a typical cut-off frequency of 1.0GHz.
HNT5040MT3R3 20160108
This document contains specifications for an electronic component. It includes:
1. Electrical characteristics such as current and inductance ratings.
2. Mechanical dimensions.
3. Manufacturing details like part number, manufacturer contact information, and approval specifications.
Catalog mikro mikro mk203a-dienhathe.vn
The document provides technical specifications for an overcurrent relay rated for 5 amps at 50 Hz. It can monitor currents from 2.0 to 6.0 amps and has adjustable settings for time multiplier and high-set pickup. The relay has indicators and contacts for trip signaling and mounts in a 96x96mm panel. It is designed to protect electrical systems according to IEC standards and operate in temperatures from -5°C to 55°C.
Catalog mikro mikro mk204a-dienhathe.vn
The document provides specifications for the MK204A overcurrent relay, including its ratings, auxiliary supply information, setting ranges, contact specifications, indicators, performance characteristics, mechanical details, environmental conditions, typical wiring diagram, and ordering information. The relay has adjustable settings for low-set and high-set overcurrent protection, with the low-set having an inverse definite time characteristic. It is intended for panel mounting and complies with relevant protection device standards.
Ultrasonic Level Transmitter ULT200H
Ultrasonic Level Indicator are suitable for measuring the Level if fluid in the tank by non contcat method.
The Instrument works on Sound Waves and the out put from the same ( 4 to 20 mA) is given to a Digital Level Indicator.
The instrument is suitable for Foam Free and fumes Free material only.
Types : 2-Wire Ultrasonic Level Transmitter & Self Compensating (3/4 Wire) Ultrasonic Level Transmitter
The salient features and specifications are as follow:
Simple push-button calibration (Accurate)
Output 4-20 mA / 20-4 mA
(Isolated on 4 Wire Model's only)
Built-in temperature compensation
Optional RS232 Or RS485 communications with calibration, diagnostics and data
logging software
PLC compatible
Three or Four Wire Operation
Self Cleaning operation of sensor face
APPLICATIONS
Solids (Models 25 U, 45U & 52U Below)
Solids Range Approx. ½ of liquid
C = Communication 4 for 485 or 2 for 232, Blank = no Communications
XX = Operating Frequency, U = Ultrasonic 400 = AC Power, 300 = DC Power
Magnetostrictive level transmitter added to magnetic level gauge
The MGT-6000 is a magnetostrictive level transmitter designed for magnetic liquid level indicators. It uses magnetostriction to measure the position of a magnetic float along a sensing wire, calculating the float position from the time between start and end pulses. Key features include high accuracy, a low-profile waveguide, HART communication, and an explosion proof housing. It can be mounted to most magnetic level indicators and provides a stable 4-20 mA output.
Laser based level transmitter for industrial process measurement
Jogler is a Baton Rouge, Louisiana manufacturer of high quality Magnetic Level Gauges, Magnetostrictive Transmitters, Direct-Reading Level Gauges with armored shield, Sight Flow Indicators, Specific Gravity Analyzers, Point Level Switches and other accessories. Jogler products are custom designed to meet customer specifications and manufactured to applicable ASME B31.1 and B31.3 code requirements to ensure reliable operation and maintenance free design.
Datasheet GC
This document provides product specifications for a female F-connector (GC CaP System F FEMALE CONNECTOR) for connecting coaxial cables. The connector is suitable for cables with inner diameters between 0.3-1.1mm, has a 75 ohm impedance rating up to 2GHz, and can withstand 500V and 5000M-ohm insulation resistance. It has a zinc-nickel plated body and bronze-nickel plated shrapnel. Each connector is sold with two CaPs and has an operating temperature range of -40 to 120 degrees Celsius.
DIN Rail Mount Tachometer for Process Measurement and Control
Input frequency pulses from various pickup devices are converted into an analog output signal that can be used for control or alarm purposes.
TMT80
The document provides product information for the iTemp TMT80 programmable head transmitter, including an overview of its application and functions, technical specifications and dimensions, details on electrical connection and pricing, and contact information for the manufacturer. The TMT80 can be used with various temperature sensors and has a 4-20 mA output, with its measuring range configurable via software. It is suitable for installation in a sensor head and provides accurate temperature measurement and transmission of signals.
Catalog mikro mikro mk201a-dienhathe.vn
This document provides technical specifications for an earth fault relay model MK201A. The relay has a rated current of 5A at 50Hz, with thermal withstand of 4 times rated current continuously. It has adjustable settings for low-set and high-set detection ranges, and contactors with a rated capacity of 5A at 250V AC. The relay complies with IEC 60255-26 standards and has microprocessor-based control and measurement of fundamental frequency current.
Moisture, Hydrogen, and Temperature Measurement in Electrical Transformers
Moisture, Hydrogen, and Temperature Measurement in Electrical TransformersAlliance Technical Sales, Inc.
Receive information on transformer fault situations with reliable and robust online transmitter. The Vaisala Moisture, Hydrogen and Temperature Transmitter MHT410 for Transformer Oil measures directly from representative transformer oil giving both reliable hydrogen trend as well as fast moisture data.
It is built to last and doesn’t have wearing parts such as membrane, pumps, hoses or batteries. Easy to install, the MHT410 is ready to use within minutes. Continuously monitoring hydrogen and moisture levels with an in-situ probe is the first step in extending the life of a transformer through implementation of predictive maintenance practices leading to lower total cost of ownership.System Sensor APA151
Buy the System Sensor APA151 at JMAC Supply.
https://www.jmac.com/System_Sensor_APA151_p/system-sensor-apa151.htm?=slideshare
宏信科技合金磁膠2X2,3X3系列規格
This document provides specifications for HT-TECH Corporation's HNT-E Series SMD power inductors. It includes dimensions, electrical characteristics like inductance and current ratings, ordering information formats, test equipment details, and packaging information for the surface mountable HNT2512-E and HNT3015-E inductors. Current vs. inductance graphs are provided for each part number showing specifications like saturation current.
Catalog mikro mikro mk232a-dienhathe.vn
This document provides technical specifications for the MK232A Earth Fault Relay. The relay has a rated current of 5A, operates at 50 or 60Hz, and has a thermal withstand of 4 times the rated current. It has settings for low-set and high-set detection of earth faults with time delays. The relay has contacts rated for 5A at 250V AC and indicators for power, pickup, and trip conditions. It is DIN rail mountable, measures 96x96x110mm, and is suitable for temperatures from -5°C to 55°C.
DTT35
The document provides technical specifications for the Flowphant T DTT35 flow switch, including:
- It measures the mass flow of liquids from 0.1 to 9.84 ft/s using a calorimetric measurement method.
- It has IP65 protection, outputs include 1 or 2 PNP switches or 1 PNP switch with 4-20mA output, and operates from 18-30VDC.
- Dimensions and process connections include options for clamp, varivent, and DIN11851 fittings from 1-2" and sensor lengths of 30, 50, or 100mm.
- It is available from E-direct starting at $427 for quantities of 11-35 units.
6 ep13322ba20 datasheet_en
This document provides specifications for the SITOP PSU100S 24 V/2.5 A stabilized power supply. It has an input voltage range of 85-132V or 170-264V and can output 24V DC at a maximum of 2.5A. Key features include overvoltage protection, adjustable output voltage, signaling relay for output status, and DIN rail mounting.
Karakteristik sensor
The document describes the characteristics of two sensors - a UVtron sensor (R2868) and an IR sensor (gp2y0a21yk sharp). For the UVtron sensor, it lists its transfer function, sensitivity range of 185 to 260 nm, span of -20 to +60, accuracy within 185 to 260 nm range, hysteresis, nonlinearity, noise of 30 Vpp, and resolution. For the IR sensor, it provides similar details on its transfer function, sensitivity range of 10 to 80cm, span of 24cm, accuracy of 0.3 cm, hysteresis, nonlinearity, noise of Vcc-0.3, resolution, and bandwidth range of 0.25-0.55 volt. Both
What's hot (20)
Magnetostrictive level transmitter added to magnetic level gauge
Magnetostrictive level transmitter added to magnetic level gauge
Laser based level transmitter for industrial process measurement
Laser based level transmitter for industrial process measurement
DIN Rail Mount Tachometer for Process Measurement and Control
DIN Rail Mount Tachometer for Process Measurement and Control
Moisture, Hydrogen, and Temperature Measurement in Electrical Transformers
Moisture, Hydrogen, and Temperature Measurement in Electrical Transformers
FSR05KT6R8 SPEC 20141219
- 1. A B C D E F G H I J I t e m 2.4 MAX 1.65 MAX 1.2±0.1 0.65 REF 0.44 REF 2.32 1.59 1.19 ELECTRICAL CHARACTERISTICS (電特性要求)： TEL：886-2-2649-7222 FAX：886-2-8692-1639 9F.,NO.179,Sec.1,Datong Rd., Xizhi City,Taipei County 221,Taiwan (R.O.C) 20140424C Ope.Temp. IDC DCR SRF Spec.(mm) (規格) 1.89Ω2.15Ω MAX 55 MHz MIN 300 mA MAX -40℃ To 85℃ SPECIFICATION FOR APPROVED 樣品承認書 Item 項目 6.88uH P/N (料號)：FSR05KT6R8 MACHANCIAL DIMENSIONS (m/m)： Typ. (參考值) Typ. (實測值) L Q 31 6.8uH ± 10% Marking (印字):"●" (White) Frequence Item (項目) Specifications (規格) 25 MIN @7.9MHz