Building Construction Project 2
•
0 likes•288 views
This document provides step-by-step instructions for three construction projects: installing toilet floor tiles, installing a window, and building an indoor staircase. For toilet floor tiles, it outlines 14 steps for prepping the floor, installing backer board, laying thin-set, setting tiles, and grouting. For windows, it details 8 steps for installing the sill angle, centering sashes, installing the header and jambs, adjusting for gaps, and caulking. For indoor staircases, it lists 4 steps for measuring, installing skirt boards and structure bones, attaching treads to hanger boards, and screwing in treads.
Report
Share
Report
Share
Download to read offline
Recommended
Cavity walling ppoint
This document discusses cavity wall construction. It describes how to maintain a clean cavity, properly bed wall ties, and treat openings. Four types of wall ties are shown. Cavity walls are more rain resistant and better insulated than single skins, but require good design and workmanship. Ties should be spaced regularly and bedded firmly in mortar at least 50mm into each leaf. The cavity must be kept clear of mortar droppings to prevent deterioration of the ties.
Penetrating snow guard installation
The document provides installation instructions for a penetrating roof system in two main steps. Step 1 describes securely bracketing the system to the substructure by measuring and marking bracket locations, sealing the brackets, and fastening them to the roof. Step 2 explains sliding the tubes together and inserting stop pins in the first and last brackets of each run to prevent the tubes from sliding out of position. Proper care is advised when installing the tubes to avoid scratching and potential rusting.
ERECTION/LAUNCHING OF PRECAST SEGMENT USING GROUND SUPPORT SYSTEM (UNDER SLUNG)
The document provides steps for launching spine segments using a ground support system for the Zuari Bridge Project Package III. It describes preparing base supports, erecting tower modules, placing sliding shoes and segments, matching segments, threading strands, stressing, and grouting. The key steps include laying foundations, erecting towers, sliding segments into place using temporary supports, joining segments, installing post-tensioning strands, and grouting.
Eave finishes
The document discusses different methods of framing and finishing eaves, including boxed level eaves, lined on-the-rake eaves, and eaves lined on top of rafters. It notes that level framing members running between the wall and fascia are called soffit bearers or eaves sprockets. When using timber framing over face brick walls, at least 12mm of clearance must be provided between the underside of the eaves soffit bearer and the top of the brickwork to allow for shrinkage of the timber as it dries. Failure to provide adequate clearance can cause cracking or displacement of the top course of bricks.
How To Install Cedar Shingles
This installation guide provides basic information for the proper installation of our product on your roof or walls. Our shingles together with your installation skills should produce an appealing and satisfying look, which will last for generations.
Swifts roof repairs_leaflet
1) When repairing or re-roofing a building where swifts are nesting, do not work on the roof from May to August when swifts are nesting and leave existing swift nest access points undisturbed.
2) Repairs and re-roofing often deny swifts access to nesting areas in eaves, holes, and other spaces, eliminating local colonies.
3) With planning, repairs and re-roofing can preserve swift nesting areas by leaving eaves open, cutting access slots, installing partitions, offsetting flashings, and leaving holes and gaps as they were to maintain swift entry.
Hermētiskums “inteliģento” membrānu izmantošanā
This document discusses various aspects of airtightness systems using tapes and membranes. It addresses topics like adhesion properties, cohesion of adhesive tapes, primers for improving adhesion, long term testing results showing durability, and details of specific tape products for different applications like window installation, wall connections, ductwork, and more. The overarching message is that tapes and membranes form a complete airtightness system where planning and using compatible products together is important to achieve a durable airtight seal.
M611 (2)-WALLSECTION
The document is a building section that details the materials and construction of the various elements of the structure from footing to roof. It shows a concrete foundation wall and slab, wood framed walls with batt insulation and vapor barrier, an asphalt shingle roof with plywood sheathing and rafters, and wood floors above a concrete slab on grade with a drainage system. Dimensions are provided for floor heights and overall building height.
Recommended
Cavity walling ppoint
This document discusses cavity wall construction. It describes how to maintain a clean cavity, properly bed wall ties, and treat openings. Four types of wall ties are shown. Cavity walls are more rain resistant and better insulated than single skins, but require good design and workmanship. Ties should be spaced regularly and bedded firmly in mortar at least 50mm into each leaf. The cavity must be kept clear of mortar droppings to prevent deterioration of the ties.
Penetrating snow guard installation
The document provides installation instructions for a penetrating roof system in two main steps. Step 1 describes securely bracketing the system to the substructure by measuring and marking bracket locations, sealing the brackets, and fastening them to the roof. Step 2 explains sliding the tubes together and inserting stop pins in the first and last brackets of each run to prevent the tubes from sliding out of position. Proper care is advised when installing the tubes to avoid scratching and potential rusting.
ERECTION/LAUNCHING OF PRECAST SEGMENT USING GROUND SUPPORT SYSTEM (UNDER SLUNG)
The document provides steps for launching spine segments using a ground support system for the Zuari Bridge Project Package III. It describes preparing base supports, erecting tower modules, placing sliding shoes and segments, matching segments, threading strands, stressing, and grouting. The key steps include laying foundations, erecting towers, sliding segments into place using temporary supports, joining segments, installing post-tensioning strands, and grouting.
Eave finishes
The document discusses different methods of framing and finishing eaves, including boxed level eaves, lined on-the-rake eaves, and eaves lined on top of rafters. It notes that level framing members running between the wall and fascia are called soffit bearers or eaves sprockets. When using timber framing over face brick walls, at least 12mm of clearance must be provided between the underside of the eaves soffit bearer and the top of the brickwork to allow for shrinkage of the timber as it dries. Failure to provide adequate clearance can cause cracking or displacement of the top course of bricks.
How To Install Cedar Shingles
This installation guide provides basic information for the proper installation of our product on your roof or walls. Our shingles together with your installation skills should produce an appealing and satisfying look, which will last for generations.
Swifts roof repairs_leaflet
1) When repairing or re-roofing a building where swifts are nesting, do not work on the roof from May to August when swifts are nesting and leave existing swift nest access points undisturbed.
2) Repairs and re-roofing often deny swifts access to nesting areas in eaves, holes, and other spaces, eliminating local colonies.
3) With planning, repairs and re-roofing can preserve swift nesting areas by leaving eaves open, cutting access slots, installing partitions, offsetting flashings, and leaving holes and gaps as they were to maintain swift entry.
Hermētiskums “inteliģento” membrānu izmantošanā
This document discusses various aspects of airtightness systems using tapes and membranes. It addresses topics like adhesion properties, cohesion of adhesive tapes, primers for improving adhesion, long term testing results showing durability, and details of specific tape products for different applications like window installation, wall connections, ductwork, and more. The overarching message is that tapes and membranes form a complete airtightness system where planning and using compatible products together is important to achieve a durable airtight seal.
M611 (2)-WALLSECTION
The document is a building section that details the materials and construction of the various elements of the structure from footing to roof. It shows a concrete foundation wall and slab, wood framed walls with batt insulation and vapor barrier, an asphalt shingle roof with plywood sheathing and rafters, and wood floors above a concrete slab on grade with a drainage system. Dimensions are provided for floor heights and overall building height.
Proposal
This document outlines a "Paying It Forward" project proposal for an environmental/community activity. Students are asked to describe a proposed project by providing details of the organization, the environmental issues they face, how the student's project would address a need, as well as objectives like the duties required, timeline, location, beneficiaries, estimated costs, and sustainability strategies. The proposal requests key information be included like organization name, contact, address, and any additional materials, kept under one page. It aims to give students experience making positive community contributions.
Synopsis
The document discusses the theory of critical regionalism in architecture. It begins by explaining that critical regionalism emerged as a third approach between postmodernism and modernism, seeking a middle ground. The key aspects of critical regionalism are reflecting local culture and traditions through design and materials, while applying stylistic flourishes in a meaningful way. An example project discussed is the British India Corporate Warehouse in Malaysia, which successfully combines modern and traditional elements. The document argues that critical regionalism synthesizes a region's identity, history and culture, and helps address the balance between past and future in architecture.
Report
This document provides information about a photography project focused on the historic city of George Town, Penang. It discusses the concept of monochrome photography, the theme of capturing the "pillars" or defining elements of George Town, research conducted on George Town's history and architecture, identification of specific streets to photograph, and preparation for the photo shoot.
Portfolio for Airbnb
My portfolio contains a painting of the yellow flower tansy. A still life work depicts the subject in great detail, showing the round flower heads and feathery green leaves of the tansy plant. This piece demonstrates my skills in realistic depiction of botanical subjects.
Caracteristicas de animales acuaticos
Los animales acuáticos viven en el agua dulce o salada y presentan adaptaciones como respirar oxígeno disuelto o salir a la superficie. Incluyen peces, delfines y otros, que pueden ser herbívoros o carnívoros. Los arrecifes de coral son comparados a las selvas debido a su gran variedad de especies y condiciones óptimas como oxígeno, luz y temperatura constante.
First Passive House Retrofit in a Cold Climate: The MinnePHit House
This presentation was given by Tim Delhey Eian of TE Studio on Tuesday, September 23rd, at the 2014 NAPHN Passive House Conference in Portland, Maine. It showcases the first cold climate Passive House retrofit (EnerPHit) project which TE Studio designed, and the Passivhaus Institut in Darmstadt (Germany) certified as a pilot EnerPHit project.
FrameWRX Installation Instructions
FrameWRX Installation Instructions, Southwest Solutions Group www.southwestsolutions.com, 1-800-803-1083
plan-A-1
This document contains plans and details for repair work to a courtyard concrete slab and foundation wall. It includes:
1) A plan view showing the courtyard layout with dimensions and notes for excavating around the foundation to expose it for waterproofing, removing the existing concrete slab and steps, and pouring a new 5" concrete slab with drainage.
2) Sections and details showing the scope of work for waterproofing the exposed foundation wall; installing a waterproofing, protection board and flashing; backfilling; and constructing the new concrete slab and steps.
3) Notes specifying preparation, installation and construction requirements including removing brick to install waterproofing and flashing, applying waterproofing, installing drains and back
Gate keeper 1935 series
This document provides instructions for setting up, striking, and packing away a Gatekeeper 1935 Series shelter. It describes the process in 19 sections labeled a-q, covering evaluating the site, positioning equipment, assembling the frame, attaching fabric panels to form the roof and walls, installing accessories, and finally striking and folding the shelter for storage. The instructions emphasize safety, proper techniques, and ensuring all components are cleaned and stored in the corresponding bags.
Gate keeper 20 series
The document provides step-by-step instructions for assembling, setting up, and striking a GateKeeper 20 Series shelter. It begins with evaluating the site and positioning equipment. It then details how to assemble the frame, attach the roof and wall fabrics, install flooring and doors, and connect accessories. The document concludes with instructions for taking down, cleaning, folding, and repackaging the various shelter components in an organized manner.
Carpet Install and re-install 101
This slide show discusses some of the rules of carpet installation put forth by the CRI (Carpet and Rug Institute).
Ridge Vent Installation Instructions for Hip Roofs
Quarrix Ridge Vent installation is easy on hip roofs! Here are the installation instructions you need to complete an installation.
FloodBreak Detailed Installation
This document provides guidelines for identifying components and installing a flood gate unit. It identifies the gate, gate pan, installation bracket, and gate unit. It then lists 18 steps for installation, including identifying rough opening dimensions, excavating, placing structural footing and drain, setting and leveling the gate unit, anchoring it, and finishing with concrete, grout, and paint. Proper installation is estimated to take a 4 person crew 3 days, with setting and anchoring the gate unit taking 1.5 days. Contact information is provided for technical assistance.
Bright_Covers_Installation_Manual
This document provides installation instructions for a Bright Covers patio cover system. It begins with general recommendations to fully read and understand the instructions before installation. The document then lists required tools and system components. It provides details on laying out the system, including minimum pitch requirements and height measurements. Instructions are given for installing the hanging rail to the house or roof, as well as for installing the posts and I-beam. Diagrams illustrate hanging rail connection details. The document aims to ensure a successful standard installation of the Bright Covers system.
Btech compile 6 oct 4am
The beam and block flooring system uses precast concrete beams that are laid on foundations to support concrete blocks placed between the beams. This system provides a durable, cost-effective floor that is relatively easy to install without needing specialized skills. At the medical center project, a beam and block flooring system was used along with strip foundations, cavity wall construction, and a flat roof to construct a new single-story extension and remodeling of an existing surgery building.
Refrigerating Sliding Door KSC
The industrial refrigerating sliding doors are designed for cold rooms that must retain temperatures between 0 °C and -40°C (32°F and -104°F). These top-quality doors are specifically used for the meat, fishing, vegetable, fruit, dairy and logistics industries. An important aspect of Kaviflex’s refrigerating sliding doors is the simplicity and ease of assembly and use.
construction management site visit ppt
detail about the site visited in aurangabad for the presentation on construction management practical work by vikas k.verma
More Related Content
Viewers also liked
Proposal
This document outlines a "Paying It Forward" project proposal for an environmental/community activity. Students are asked to describe a proposed project by providing details of the organization, the environmental issues they face, how the student's project would address a need, as well as objectives like the duties required, timeline, location, beneficiaries, estimated costs, and sustainability strategies. The proposal requests key information be included like organization name, contact, address, and any additional materials, kept under one page. It aims to give students experience making positive community contributions.
Synopsis
The document discusses the theory of critical regionalism in architecture. It begins by explaining that critical regionalism emerged as a third approach between postmodernism and modernism, seeking a middle ground. The key aspects of critical regionalism are reflecting local culture and traditions through design and materials, while applying stylistic flourishes in a meaningful way. An example project discussed is the British India Corporate Warehouse in Malaysia, which successfully combines modern and traditional elements. The document argues that critical regionalism synthesizes a region's identity, history and culture, and helps address the balance between past and future in architecture.
Report
This document provides information about a photography project focused on the historic city of George Town, Penang. It discusses the concept of monochrome photography, the theme of capturing the "pillars" or defining elements of George Town, research conducted on George Town's history and architecture, identification of specific streets to photograph, and preparation for the photo shoot.
Portfolio for Airbnb
My portfolio contains a painting of the yellow flower tansy. A still life work depicts the subject in great detail, showing the round flower heads and feathery green leaves of the tansy plant. This piece demonstrates my skills in realistic depiction of botanical subjects.
Caracteristicas de animales acuaticos
Los animales acuáticos viven en el agua dulce o salada y presentan adaptaciones como respirar oxígeno disuelto o salir a la superficie. Incluyen peces, delfines y otros, que pueden ser herbívoros o carnívoros. Los arrecifes de coral son comparados a las selvas debido a su gran variedad de especies y condiciones óptimas como oxígeno, luz y temperatura constante.
Viewers also liked (10)
Similar to Building Construction Project 2
First Passive House Retrofit in a Cold Climate: The MinnePHit House
This presentation was given by Tim Delhey Eian of TE Studio on Tuesday, September 23rd, at the 2014 NAPHN Passive House Conference in Portland, Maine. It showcases the first cold climate Passive House retrofit (EnerPHit) project which TE Studio designed, and the Passivhaus Institut in Darmstadt (Germany) certified as a pilot EnerPHit project.
FrameWRX Installation Instructions
FrameWRX Installation Instructions, Southwest Solutions Group www.southwestsolutions.com, 1-800-803-1083
plan-A-1
This document contains plans and details for repair work to a courtyard concrete slab and foundation wall. It includes:
1) A plan view showing the courtyard layout with dimensions and notes for excavating around the foundation to expose it for waterproofing, removing the existing concrete slab and steps, and pouring a new 5" concrete slab with drainage.
2) Sections and details showing the scope of work for waterproofing the exposed foundation wall; installing a waterproofing, protection board and flashing; backfilling; and constructing the new concrete slab and steps.
3) Notes specifying preparation, installation and construction requirements including removing brick to install waterproofing and flashing, applying waterproofing, installing drains and back
Gate keeper 1935 series
This document provides instructions for setting up, striking, and packing away a Gatekeeper 1935 Series shelter. It describes the process in 19 sections labeled a-q, covering evaluating the site, positioning equipment, assembling the frame, attaching fabric panels to form the roof and walls, installing accessories, and finally striking and folding the shelter for storage. The instructions emphasize safety, proper techniques, and ensuring all components are cleaned and stored in the corresponding bags.
Gate keeper 20 series
The document provides step-by-step instructions for assembling, setting up, and striking a GateKeeper 20 Series shelter. It begins with evaluating the site and positioning equipment. It then details how to assemble the frame, attach the roof and wall fabrics, install flooring and doors, and connect accessories. The document concludes with instructions for taking down, cleaning, folding, and repackaging the various shelter components in an organized manner.
Carpet Install and re-install 101
This slide show discusses some of the rules of carpet installation put forth by the CRI (Carpet and Rug Institute).
Ridge Vent Installation Instructions for Hip Roofs
Quarrix Ridge Vent installation is easy on hip roofs! Here are the installation instructions you need to complete an installation.
FloodBreak Detailed Installation
This document provides guidelines for identifying components and installing a flood gate unit. It identifies the gate, gate pan, installation bracket, and gate unit. It then lists 18 steps for installation, including identifying rough opening dimensions, excavating, placing structural footing and drain, setting and leveling the gate unit, anchoring it, and finishing with concrete, grout, and paint. Proper installation is estimated to take a 4 person crew 3 days, with setting and anchoring the gate unit taking 1.5 days. Contact information is provided for technical assistance.
Bright_Covers_Installation_Manual
This document provides installation instructions for a Bright Covers patio cover system. It begins with general recommendations to fully read and understand the instructions before installation. The document then lists required tools and system components. It provides details on laying out the system, including minimum pitch requirements and height measurements. Instructions are given for installing the hanging rail to the house or roof, as well as for installing the posts and I-beam. Diagrams illustrate hanging rail connection details. The document aims to ensure a successful standard installation of the Bright Covers system.
Btech compile 6 oct 4am
The beam and block flooring system uses precast concrete beams that are laid on foundations to support concrete blocks placed between the beams. This system provides a durable, cost-effective floor that is relatively easy to install without needing specialized skills. At the medical center project, a beam and block flooring system was used along with strip foundations, cavity wall construction, and a flat roof to construct a new single-story extension and remodeling of an existing surgery building.
Refrigerating Sliding Door KSC
The industrial refrigerating sliding doors are designed for cold rooms that must retain temperatures between 0 °C and -40°C (32°F and -104°F). These top-quality doors are specifically used for the meat, fishing, vegetable, fruit, dairy and logistics industries. An important aspect of Kaviflex’s refrigerating sliding doors is the simplicity and ease of assembly and use.
construction management site visit ppt
detail about the site visited in aurangabad for the presentation on construction management practical work by vikas k.verma
Doors & windows
This document discusses different types of doors and windows. It provides details on revolving doors, sliding doors, and windows. For doors, it classifies them based on their arrangement of components, method of construction, and working. It describes types of sliding doors like bypass, surface, and pocket. For windows, it covers sliding and pivoted windows. Sliding windows move horizontally or vertically on rollers while pivoted windows swing around fixed pivots. The document aims to inform about various door and window configurations and mechanisms.
Final bcon
This document provides step-by-step instructions for installing doors and windows. For doors, it describes measuring the opening, aligning the frame, securing it temporarily, installing panels and locks. Key door parts include the frame, jamb, panels, hinges and locks. Common lock types are mortise locks and cylinder locks. For windows, it explains setting out the sub-frame, installing the main frame, glazing panels, fitting casement and awning windows and checking operation. Main window parts include the sub-frame, main frame, inner frame and trim.
Final bcon
This document provides step-by-step instructions for installing doors and windows. For doors, it describes measuring the opening, aligning the frame and securing it with wedges, installing the door panel with hinges and the lockset. For windows, it explains confirming the sub-frame layout, fixing the main frame, installing the glazed panel with gaskets, and checking the operation. Common door and window types are also defined, such as fixed, casement and awning windows. The document aims to clearly explain the installation process for these building elements.
Odl tube training
The document provides instructions for installing an ODL tubular skylight. It describes the basic 5-step installation process: 1) determining the ceiling location, 2) determining the roof location, 3) cutting the hole in the roof, 4) cutting the hole in the ceiling, and 5) assembling and installing the tubular skylight components. Key aspects of ODL tubular skylights are that they provide natural light with minimal installation disruption and lower cost compared to traditional skylights.
Fabral SSR Metal Roofing Installation Manual
Fabral provides installation guidelines for their 1-1/2" SSR metal roofing system. Key details include:
- Panels are factory caulked and have a minimum slope of 1:12.
- Proper substrate preparation and underlayment are required before installing panels.
- Panels are installed starting at the gable end and locked together along the length using overlapping ribs.
- Accessories like closures, flashings and trims are installed using sealants and fasteners to provide a weather tight seal.
- Proper storage, handling and installation techniques are outlined to ensure quality installation and performance of the system.
Merged
This document summarizes a student project to design and construct a shelter. It includes sections on design concept, materials used, construction process, structural elements, and mechanisms. The shelter design was inspired by trishaws and aims to provide weather protection while allowing configurations. Materials like plywood and waterproof canvas were used. Key structural elements are cross-halving joints, mortise and tenon joints, and bolts/nuts. The framing includes a fixed frame and retractable smaller frames to control ventilation. Load is distributed through the grid base structure.
False Ceiling Information and Joinary Details
Basic Understanding and information for False Ceiling and its fitting. Best for first few semester of architecture students.
Building Construction 2
This document provides details on the construction of a wooden shelter built by a group of students. It includes the design development process, design structure, materials used, and construction process. The shelter was constructed with a square base, triangular roof, columns, diagonal bracing, floor slabs, and plywood roof. Materials included wooden planks, plywood, and plastic sheeting. The document outlines how the various components were joined and installed, and describes load testing of the completed shelter.
Similar to Building Construction Project 2 (20)
First Passive House Retrofit in a Cold Climate: The MinnePHit House
First Passive House Retrofit in a Cold Climate: The MinnePHit House
Ridge Vent Installation Instructions for Hip Roofs
Ridge Vent Installation Instructions for Hip Roofs
More from ShingYeou Tan
Untitled 41
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Untitled 1 (1)
This document presents the results of a statistics project conducted by students to analyze customer preferences at a university Subway location. The group surveyed 200 customers over 3 days, collecting data on demographics, purchase habits, and satisfaction levels. They then analyzed the data through 14 figures presented in graphs and charts. Key findings included that the majority of customers were Malaysian students aged 16-20 who visited 1-3 times per month and preferred the roasted chicken sandwich. Overall customer satisfaction with Subway was high. The project helped the students learn how to conduct surveys, analyze statistical data, and communicate results visually through infographics.
New one
The document summarizes research conducted on three stationery shops in Subang Jaya: Vision Art, Tee Seng Sdn Bhd, and Heng Co Stationery Shop. Background information is provided on the history and operations of each shop. Vision Art has been in business the longest and offers a wide range of art supplies in addition to stationery. Tee Seng is located on a university campus and provides printing and binding services. Heng Co is an older shop that also offers basic sewing services. Recommendations are made for each shop, such as expanding space for Vision Art and renovating Heng Co's outdated facilities.
M aths
According to a survey of 200 Subway customers:
- 64% of customers were between 26-40 years old. The most popular times to visit were between 2-4pm and the most frequent visits were 1-3 times per month.
- The best selling bread was Italian BMT at 67.5%. The best selling sauces were Honey Mustard at 77.5% and Parmesan Oregano at 69%.
- The average spending per visit was between RM11-15 and customers reported spending an average of 30 minutes to 1 hour in the store.
Psy journal 3
This document discusses several topics related to social psychology and conformity:
1) It defines conformity as changing one's beliefs or behaviors to fit in with a group. Military groups often rely on conformity, as did Hitler in manipulating his army.
2) It references Stanley Milgram's 1960s experiment where participants administered electric shocks to others due to conformity pressures.
3) It discusses a 2002 incident in China where many passersby ignored an injured toddler due to fears of legal trouble, showing how conformity can encourage inaction.
Business Charity Drive Report
This document provides details of a group's charity event held over 5 days to raise funds for Rumah Charis, a charity organization that provides care for the elderly and children. The group raised a total of RM2010.40 through product sales and donations. Their main products were caps and t-shirts featuring various designs. They also provided camera consulting services. Through promotions like mobile sales and small gifts for donations, the group was able to meet their fundraising target of RM2000 and gain valuable experience in business functions like marketing, operations, and finance. The event was a success thanks to product suppliers, sponsors who donated cash, and support from the local community.
More from ShingYeou Tan (20)
Building Construction Project 2
- 1. OPEN HOUSE tan shing yeou 0314850 building construction 1 1. TOILET FLOORING ( TILES ) STEP- BY- STEP 1. SCRUB THE FLOOR WITH STRIPPER 2. DRIVE 2-1/2-IN SCREWS INTO THE FLOOR JOISTS 3. FILL LOW SPOTS WITH THIN-SET 4. INSTALL BACKER BOARD OVER THE FLOOR 5. SCORE AND SNAP THE BACKER BOARD 6. TROWEL ON THE THIN-SET 7. COVER THE JOINTS 8. ATTACH GUIDE BOARDS TO GUIDE THE LAYOUT 9. SET THE FULL TILES 10. SET THE PERIMETER TILES 11. INSTALL AN EXTENSION RING OVER THE TOILET FLANGE 12. STUFF BACKER ROD ALONG THE WALL 13. GROUT THE JOINS 14. CLEAN THE TILES PROPERTIES OF TILES - DURABLE & SAFE - SLIP RESISTANCE SURFACE WHICH IS SUITABLE FOR BATHROOM FLOORING - IMPERVIOUS TO WATER ABSORPTION 2. WINDOW nailing fin window sill rough sill STEP- BY- STEP 1. LAY A BEA OF CAULK ALONG THE INSIDE OF THE OUTSIDE STOPS ON THE JAMBS, MARK THE SILL FOR THE SILL ANGLE, CAULK AND INSTALL THE SILL ANGLE. 2. CENTER THE TOP AND BOTTOM SASHES VERTICALLY 3. PLACE THE HEADER OF TOP OF THE WINDOW AND CULTK ITS TOPS 4. INSTALL THE MOUNTING SCREWS AT THE TOP AND BOTTOM OF EACH SIDE JAMB. 5. SLIDE THE HEADER UP SO THAT IT SEALS ANY GAP BETWEEN THE WINDOW AND FRAME. 6. SLIDE THE TOP AND BOTTOM SASHES UP AND DONW TO CHECK FOR GAPS AND SMOOTH OPERA-TION. 7. USE BUILT-IN ADJUSTMENT IN THE SIDE JAMBS TO ADJUST THE WINDOW FRAME 8. CAULK THE INSIDE OF THE WINDOW AND INSTALL THE INSIDE STOPS VINYL TRIM AND CAULK SEAL THE GAP AT THE BOTTOM OF THE WINDOW. IT MAKE SURE THE WINDOWS FITS AGAINST THE STOOL ON THE INSIDE THE INSIDE STOP MOLDING HELPS HOLD THE WINDOW IN PLACE 3. INDOOR STAIRCASE STEP- BY- STEP 1. MEASURE AND CUT THE STAIRCASE TREAD INTO STANDARD SIZE. 2. INSTALL THE SKIRT BOARD TOGETHER WITH THE STRUCTURE BONE OF THE STAIRCASE 3. ATTACH TO THE HANGER BOARD AND SKREW WITH 70MM DESK SCREW 4. INSTALL THE TREAD AND SCREW IT INTO THE HOLES STEPPED REBATED NOSING WROD-FACE TRIMMER