Pankaj Industries manufactures various material handling equipment such as trolleys, pallets, and racks. The document provides details on the different types of equipment including maintenance trolleys, metal pallets, and storage racks. It also describes machines for bus bar fabrication and assembly fixtures. Key features highlighted include high load capacity, accuracy, durability and uses in various industries like automotive, power, and textiles.
Presentaion of facility design a project on two types of Ballpoint pens MakingARif Khan
Open Ended Lab/ Case Study
Scenario:
A pen manufacturing firm wants to place its manufacturing setup /shop floor in an allocated area of 40x40 ft. This firm has to meet on hand demand of 2 million pens as its first order due in next month after installation. There are two main categories of pen; ball point and retractable pen. Total demand includes; .8 million ball points and 1.2 million retractable pens. Operating hours for the firm are 8 hrs/ shift and there are two shifts a day, with two operators minimum required on the shop floor. Total allotted budget including raw material and machinery is 5 million PKR.
Required:
1. A process flow for production unit and machine layout in the required area on CREO or VISIO. Dimensions must be given with proper movement spaces and buffers zones kept in mind according to standards.
2. Give proper specs of machines (references) along with their proper capacity calculations to meet the demand and budget. Incorporate down-times, defective parts and its cost. Cost analysis is also required, mention if any deficit.
3. If any assumption is taken, proper justification should be provided.
Presentaion of facility design a project on two types of Ballpoint pens MakingARif Khan
Open Ended Lab/ Case Study
Scenario:
A pen manufacturing firm wants to place its manufacturing setup /shop floor in an allocated area of 40x40 ft. This firm has to meet on hand demand of 2 million pens as its first order due in next month after installation. There are two main categories of pen; ball point and retractable pen. Total demand includes; .8 million ball points and 1.2 million retractable pens. Operating hours for the firm are 8 hrs/ shift and there are two shifts a day, with two operators minimum required on the shop floor. Total allotted budget including raw material and machinery is 5 million PKR.
Required:
1. A process flow for production unit and machine layout in the required area on CREO or VISIO. Dimensions must be given with proper movement spaces and buffers zones kept in mind according to standards.
2. Give proper specs of machines (references) along with their proper capacity calculations to meet the demand and budget. Incorporate down-times, defective parts and its cost. Cost analysis is also required, mention if any deficit.
3. If any assumption is taken, proper justification should be provided.
DESIGN AND MANUFACTURING OF SPM FOR BRAKE WHEEL CYLINDERAkshay Deshpande
Manufacturing plays vital role in any industry for producing the product. With stiff competition & challenges in the present day market, manufacturers are compelled to be more responsive to the customer’s demand regarding not only quality, but scheduled delivery. Enhancing productivity is a key concern for almost all of the mass manufacturing industries
In this project we are going to design and fabricate SPM for BAJAJ RE component for drilling, surfacing, tapping grooving etc. operations.
In this the design of SPM tool post, fixture, rotary turret, clamping arrangement and hydraulic power pack is required. The main objective of this project is to design and manufacture a SPM for increase in production rate and minimisation of worker requirement at optimum cost. This also eliminate bottleneck of machine line.
The production rate is very low due to time required for loading, clamping and manual drilling operation and de-clamping operation. The man-power required is more and skilled. If machine design and may workable it will boost the company’s production rate at lesser labour requirement rate.
Recent development of automation in vehicle manufacturing industries 1ZAID SHARIFF
Recent development of automation in vehicle manufacturing industries. This is very brief introduction to the automation processes occuring in the manufacturing industry
We are an ISO 9001:2000 certified company engaged in manufacture, supply and export of high precision surface grinding machine and cylindrical grinding machine.
Ashok Iron Work Jai Hind Plant Internship Report, BelagaviAbhishek Turamandi
Machine shop where the manufacturing of various parts of the tractor such as Front axle hub, Hydraulic lift Housing, Transmission Casing for the various companies such as Mahindra and Mahindra, Escort, Tafe are discussed.
A lot has changed since the first conventional EMCO lathe was brought onto the market in 1950. The range of developments that enabled EMCO to set milestones in the field of turning
was and still is fascinating: After cycle control in the 60s came CNC in the mid-70s. Then came integrated milling functions, revolvers, more and more axes, a counter spindle and completely new possibilities in terms of the size and complexity of the components to be machined.
Today, intelligent and automated turning solutions have replaced the laborious manual working steps of old. The requirements for precision and productivity have increased immensely in the digital age and are perfectly fulfilled with EMCONNECT.
Started to create milestones, we, Besto Handling System Company, Chennai marked our presence in the year 2001 and operate in the manufacturing / servicing of Paper Roll Pallet Truck,Manual Operated Lift Table,Industrial Dock Levelers,Fork Stacker,Battery Operated Pallet Truck since 11 years. Our quality services / products have been always appreciated by our clients. Our spontaneous attitude and confident approach in offering an excellent range of Paper Roll Pallet Truck,Manual Operated Lift Table,Industrial Dock Levelers,Fork Stacker,Battery Operated Pallet Truck, Material Handling Equipment has deepened our roots in the market. We, Besto Handling System Company, Chennai breathe with the aim of fully satisfying our clients with our high-quality products / services. We are a unit of highly experienced professionals, all of them contributing at the best of their potentials to offer the highest degree of efficiency and client satisfaction.
Oracle APEX tour in Riga
Featured speaker Joel R. Kallman has accepted invitation on 5th of October in Riga, Latvia
Slides from Joel Kallman: https://goo.gl/zdlesb
DNS Business Development Workshop
Course Overview This course is designed to provide a basic understanding of the Domain Name System (DNS) industry and business drivers to enable entrepreneurs to understand potential business opportunities in this industry. The course will focus on practical issues where appropriate, with case studies and listings of available resources and vendors in the industry. Ample time will be included for networking opportunities and identifying available resources for on-going assistance after the conclusion of the course. The course will occur over a 5 day period, with an early end on the last day to accommodate travel schedules
DESIGN AND MANUFACTURING OF SPM FOR BRAKE WHEEL CYLINDERAkshay Deshpande
Manufacturing plays vital role in any industry for producing the product. With stiff competition & challenges in the present day market, manufacturers are compelled to be more responsive to the customer’s demand regarding not only quality, but scheduled delivery. Enhancing productivity is a key concern for almost all of the mass manufacturing industries
In this project we are going to design and fabricate SPM for BAJAJ RE component for drilling, surfacing, tapping grooving etc. operations.
In this the design of SPM tool post, fixture, rotary turret, clamping arrangement and hydraulic power pack is required. The main objective of this project is to design and manufacture a SPM for increase in production rate and minimisation of worker requirement at optimum cost. This also eliminate bottleneck of machine line.
The production rate is very low due to time required for loading, clamping and manual drilling operation and de-clamping operation. The man-power required is more and skilled. If machine design and may workable it will boost the company’s production rate at lesser labour requirement rate.
Recent development of automation in vehicle manufacturing industries 1ZAID SHARIFF
Recent development of automation in vehicle manufacturing industries. This is very brief introduction to the automation processes occuring in the manufacturing industry
We are an ISO 9001:2000 certified company engaged in manufacture, supply and export of high precision surface grinding machine and cylindrical grinding machine.
Ashok Iron Work Jai Hind Plant Internship Report, BelagaviAbhishek Turamandi
Machine shop where the manufacturing of various parts of the tractor such as Front axle hub, Hydraulic lift Housing, Transmission Casing for the various companies such as Mahindra and Mahindra, Escort, Tafe are discussed.
A lot has changed since the first conventional EMCO lathe was brought onto the market in 1950. The range of developments that enabled EMCO to set milestones in the field of turning
was and still is fascinating: After cycle control in the 60s came CNC in the mid-70s. Then came integrated milling functions, revolvers, more and more axes, a counter spindle and completely new possibilities in terms of the size and complexity of the components to be machined.
Today, intelligent and automated turning solutions have replaced the laborious manual working steps of old. The requirements for precision and productivity have increased immensely in the digital age and are perfectly fulfilled with EMCONNECT.
Started to create milestones, we, Besto Handling System Company, Chennai marked our presence in the year 2001 and operate in the manufacturing / servicing of Paper Roll Pallet Truck,Manual Operated Lift Table,Industrial Dock Levelers,Fork Stacker,Battery Operated Pallet Truck since 11 years. Our quality services / products have been always appreciated by our clients. Our spontaneous attitude and confident approach in offering an excellent range of Paper Roll Pallet Truck,Manual Operated Lift Table,Industrial Dock Levelers,Fork Stacker,Battery Operated Pallet Truck, Material Handling Equipment has deepened our roots in the market. We, Besto Handling System Company, Chennai breathe with the aim of fully satisfying our clients with our high-quality products / services. We are a unit of highly experienced professionals, all of them contributing at the best of their potentials to offer the highest degree of efficiency and client satisfaction.
Oracle APEX tour in Riga
Featured speaker Joel R. Kallman has accepted invitation on 5th of October in Riga, Latvia
Slides from Joel Kallman: https://goo.gl/zdlesb
DNS Business Development Workshop
Course Overview This course is designed to provide a basic understanding of the Domain Name System (DNS) industry and business drivers to enable entrepreneurs to understand potential business opportunities in this industry. The course will focus on practical issues where appropriate, with case studies and listings of available resources and vendors in the industry. Ample time will be included for networking opportunities and identifying available resources for on-going assistance after the conclusion of the course. The course will occur over a 5 day period, with an early end on the last day to accommodate travel schedules
The Academy is built around the legal function with focus on the business knowledge and skills that General Counsel and senior counsel need in order to augment their influence in the organisation and win credit as respected commercial players.
DNS Business Development Workshop Course Overview This course is designed to provide a basic understanding of the Domain Name System (DNS) industry and business drivers to enable entrepreneurs to understand potential business opportunities in this industry. The course will focus on practical issues where appropriate, with case studies and listings of available resources and vendors in the industry. Ample time will be included for networking opportunities and identifying available resources for on-going assistance after the conclusion of the course. The course will occur over a 5 day period, with an early end on the last day to accommodate travel schedules
Analgesic and anti-inflammatory activity of methanol extract of Xanthosoma sa...Uploadworld
Xanthosoma sagittifolium is widely used in the folkloric treatment system of Bangladesh for the treatment of different diseases. The present study was conducted to evaluate the analgesic and antiinflammatory potentiality of methanol extract of Xanthosoma sagittifolium in mice.
Started to create milestones, we, Aacess Equipments marked our presence in the year 1996 and operate in the manufacturing/servicing of Material Handling Equipments since 20 years. Our quality services products have been always appreciated by our clients. Our spontaneous attitude and confident approach in offering an excellent range of Transfer Trolley Cars, Welding Equipments, Cable Pulling Winches, Hoists and Winches has deepened our roots in the market. We, Aacess Equipments breathe with the aim of fully satisfying our clients with our high-quality products services. We are a unit of highly experienced professionals, all of them contributing at the best of their potentials to offer the highest degree of efficiency and client satisfaction.
Bending and forming trim and gutter coil are necessary to create the proper size and angles of pieces that fit together to ensure a quality, finished appearance on a home’s exterior.
Internship At Avison Industry By Varad BakshiVaradB1
This an excellent Internship or industrial Training Report of Mechanical Engineering Made by a Student of Government Polytechnic Kolhapur
Namely Varad Bakshi
Engineering and Manufacturing Industry Cooperative LtdJobette Escobanas
EMICoL represents a cooperative cluster group of industries predominantly made up of small to medium businesses in the manufacturing, engineering, mining and fabrication sectors of industry.
A professional Rolling Forming Machine manufacturer and supplier of prefabricated steel buildings and Forming Machine, Cold Roll Forming Machine in China, Yingkou Changsheng Steel Structure Project Company Ltd. was founded in 2003. We have a much experience in producing superior roll forming machine with great efficiency and highly accuracy. Our products can produce steel pieces used in roof panels and wall panels, for example, and they are all environmentally friendly.
Started to create milestones, we Rajendra Gears CO. & R.G.ROLLING INDIA LTD. marked our presence in the year 2003 and operates in the manufacturing/servicing of Gearboxes and Gears, Rolling Mill Accessories, TMT Bar Rolling Mill Plant, Structural Rolling Mill Plant, Sheet Mill since 8 years. Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of Gearboxes and Gears, Rolling Mill Accessories, TMT Bar Rolling Mill Plant, Structural Rolling Mill Plant, Sheet Mill, Gears and Gearboxes that has made us to deepen our roots in the market. We Rajendra Gears CO. & R.G.ROLLING INDIA LTD. breathe with the aim to satisfy our clients with our smart products/services. We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
we, “Siddha Perfect System Pvt. Ltd” established in 2006 manufacturer and supplier of Conveyor, Billet Feeders, Die Lubrication Spraying Unit and Special Purpose Machines.
Sharma Engg. & Fabrication Works, was established in the year 1979, is one of the prominent ISO 9001:2008 certified manufacturers, suppliers, traders and distributors of a wide range of supreme quality Tractor Accessories & Components, Material Handling Trolleys.
R.V. Industries is established in 1984 as a small-scale industry to manufacture demagnetizers for Bajaj Auto Ltd., Pune. Subsequently variety of demagnetizers were developed and supplied to various customers like SKF Bearings, HMT Bearings, Asian Bearings, and Kinetic Engineering etc. After acquiring sufficient experience in demagnetizers we developed industrial washing machines for bearing races in 1989.
First machine was supplied to SKF Bearings, Pune. During past 28 years, we developed and supplied hundreds of various types of washing machines to leading automobile, components manufacturing industries and bearing manufactures. In this process we gathered lot of experience and knowledge in the industrial washing field.
Meeka Machinery Pvt. Ltd is a the best in the field of designing, manufacturing and supplying of Electric Wire Rope Hoist & Electrical Hoist for material handling.
2. We manufacture all types of
trolleys for material storage
and moment. All trolleys we
manufacture are as per cus-
tomer requirements or as per
there product needs.
Salient Features:
• High accuracy
• Excellent performance
• Longer working life
• High tensile strength
Used at :
• Automobile industry
• Power Industry
• TexƟle industry
Trolley for
material handling
3. Trolley special design for
maintenance proposes.
This trolley helps you
to save manpower only
one person is handle
the trolley and do
maintenance for your
machines. In the trolley
we also give storage space
to keep maintenance
equipments.
Mobile
Maintenance trolley
This is a special design
pallet for material
handling. This type of
pallets we manufacture
as per customer
requirements. Standard
size of pallet is 800(W)
x 1200(L) x 150(H) and
useful to carry up to
1700kg load. We also
manufacture pallets as
percustomerrequirement
or size.
Metal Pallet
Salient Features:
• High load
caring capacity
• Longer working life
• Excellent performance
Used at :
• Automobile industry
• Power Industry
• TexƟle industry
Pallets for
Material moment.
Salient Features:
• High Mobility
• Smooth OperaƟon
• DistorƟon Free
• Short working Ɵme
Used at :
• Automobile industry
• Power Industry
• TexƟle industry
Pallets special use for
movement of all type of
products such as vehicle
components. With the
help of pallets you can
move your products from
one place to another in
lower transportaƟon cost,
as well as you avoid all
transportaƟon damages
of your products. Pallets
are design as per your
product. Our pallets are
made from high quality
material to sustain
transportaƟon jerks and
for long life. We also
manufacture pallets for
export of your products;
such pallets are very light
in weight for one Ɵme
transportaƟon.
Salient Features:
• Easy to Use
• Save TransportaƟon
charges
• Safely transfer your
product
Used at :
• Automobile industry
• Power Industry
• TexƟle industry
4. Material storage racks is special design
for storage of material. You can save
your valuable
shop-flower space with the help of
such types of racks. This is 100% rust
free rack design for auto industry, food
industry and pharmaceuƟcal industry.
Features :
• Easy to operate
• Save space
• Low maintenance cost
Material
Storage Racks
5. Machine also knows as bus
bar fabricaƟon machine.
With the help of m/c you
can fabricate all types of
bus bars. This is all in one
type m/c. You can cut,
punch & bend 200 x 15
mm aluminum and cupper
plates and manufacture
bus bar as per your
requirements.
Bus Bar Cuƫng,
Punching & Bending
Machine
Salient Features:
• High Mobility
• Smooth OperaƟon
• DistorƟon Free
• Short cycle Ɵme
• Burr Free Bending and Punching
ApplicaƟons:
• Automobile industry
• Power industry
Machine specificaƟon
Model No. PI / 06-07 / BB 22
Type Horizontal Type
Tonnage 22 Tons for Bending
Tonnage 30 Tons for Punching
Tonnage 45 Tons for Cuƫng
Stroke 70 mm & 100 mm
Working Pressure 160 Bar
Bending Tolerance 1 Dig.
Working Speed 7 mm/Sec
Size of Machine 350 mm x 700 mm x 1000 mm
(Bending)
Size of Machine 1000 mm x 1200 mm x 1200 mm
(Cuƫng & Punching )
Size of Power Pack 500 mm x 650 mm x 500 mm
Size of Control Panel 300 mm x 400 mm x 200 mm
Power consumpƟon ( Electrical Motor) 5 HP
Machine operated by Foot Paddle (6 No.)
Stroke controlled by Proximity Sensors (6 No.)
Bending tools V Block & Punch ( R 8, R10 )
Bending capacity 200 mm x 12 mm of
Copper & Aluminum
Cuƫng capacity 200 x 12 mm Alu. & Cu.
Punching Capacity 25 x 10 mm Capsule hole
on 15 mm Alu. & Cu.
6. Checking Gauges
We are engaged in the Manufacturing and Supplying of Checking Gauge
welding two components it may
perly or in accurate posiƟon so
to avoid rejecƟon it is used in
Features :
• High performance
• Accurate results
• Easy to operate
• Low maintenance cost
Used at :
• Automobile industry
• Power Industry
Welding Fixture
With the aid of advanced manufacturing pracƟces and a dedicated team,
we bring forth high performance Assembly Fixture. Light Fixture Assembly
provided by us is in compliance with naƟonal and internaƟonal quality
standards. We are well-reckoned as one of the disƟnguished Manual
Assembly Fixtures Manufacturers based in India.
Features :
• Easy to operate
• Low maintenance cost
• High speed
Widely Used For :
• Welding
• RiveƟng
• Screwing
• Gluing