PREVENT FIRES BEFORE THEY START:
All traditional fire fighting technologies or methods have the same problem in common, they are being used once the damage has occurred already. Whatever media is in use, foam, water mist, sprinklers, gas or water they are being activated or used after a fire has been detected. With the common and known methods fire is being fought only reactively. Often the damage caused by the extinguishing media is worse than the damage caused by the fire itself. Furthermore, there are many applications such as Data Centers, Server Rooms, Cold Stores, Paper Mills and many more where the usage of water or gas would be fatal in its consequence.
N2 FIREFIGHTER®: fire prevention with Oxygen Reduction System BROCHUREDiego Gasser
O.R.S (Oxygen Reduction System)
The N2 FIREFIGHTER® methodology prevents the development or spreading of open fires by adding nitrogen to the atmosphere.
This document discusses the potential for nanotechnology and eco-design strategies to contribute to sustainability. It outlines how nanotechnology could be used to reduce pollution, improve functionality and lifespan, reduce energy and waste. Examples are given of how aerogel and titanium dioxide are being used in building construction to provide insulation, natural lighting, self-cleaning surfaces. The document also discusses opportunities for nanotechnology in concrete, textiles, wood and other materials to enhance properties while reducing material needs.
Gösta Larson founded Camfil in 1963 after realizing that Sweden's new nuclear power plants needed higher quality air filters to prevent catastrophe. Over 50 years later, Camfil delivers clean air solutions worldwide with over 3,400 employees and facilities on every continent. Camfil provides air filtration solutions for applications such as comfort ventilation, clean processes, power systems, air pollution control and more.
Oxygen Reduction System N2 FIREFIGHTER® ISOLCELL SPADiego Gasser
"Completely eliminating the fire hazard and safeguarding people, buildings and it's content is possible with Isolcell's N2 Firefighter oxygen depletion systems."
The document summarizes the Kyoto Protocol agreement signed in 1999 where 189 countries agreed to reduce greenhouse gas emissions. It discusses how this led to increased demand for renewable fuels to replace fossil fuels. It then focuses on Brazil's role as a pioneer in large-scale renewable energy projects due to its climate and vast forests. The rest of the document describes Swiss Group's biomass operations in Brazil and other countries, its forestal management practices, production processes, products, technologies and goals of preserving the environment.
This document provides an overview of Ceilcote Air Pollution Control, including its history, capabilities, products, and experience with various air pollution control applications. Ceilcote has offices globally and over 50 years of experience with more than 1000 installations. Their products and systems are used for applications such as solar/microelectronics, chemical processes, waste water treatment, and incineration.
Cool Technologies:Working Without HCFCs &HFCsUNEP OzonAction
Environmental and economic imperatives
Overview and examples of fluorocarbon free-cooling technologies in many applications
Practical strategies for phasing out HFCs and bypassing HFCs by Janos Mate
From CO2 to Coal: Turning Back the ClockDon Basile
Over the much longer term, global warming could cause countless animal extinctions and even threaten the very existence of mankind itself. Thankfully, several leading solutions are being developed that could rewind the CO2 emissions clock. While scrubbing carbon dioxide from the air might seem impossible, it is very close to becoming a reality.
N2 FIREFIGHTER®: fire prevention with Oxygen Reduction System BROCHUREDiego Gasser
O.R.S (Oxygen Reduction System)
The N2 FIREFIGHTER® methodology prevents the development or spreading of open fires by adding nitrogen to the atmosphere.
This document discusses the potential for nanotechnology and eco-design strategies to contribute to sustainability. It outlines how nanotechnology could be used to reduce pollution, improve functionality and lifespan, reduce energy and waste. Examples are given of how aerogel and titanium dioxide are being used in building construction to provide insulation, natural lighting, self-cleaning surfaces. The document also discusses opportunities for nanotechnology in concrete, textiles, wood and other materials to enhance properties while reducing material needs.
Gösta Larson founded Camfil in 1963 after realizing that Sweden's new nuclear power plants needed higher quality air filters to prevent catastrophe. Over 50 years later, Camfil delivers clean air solutions worldwide with over 3,400 employees and facilities on every continent. Camfil provides air filtration solutions for applications such as comfort ventilation, clean processes, power systems, air pollution control and more.
Oxygen Reduction System N2 FIREFIGHTER® ISOLCELL SPADiego Gasser
"Completely eliminating the fire hazard and safeguarding people, buildings and it's content is possible with Isolcell's N2 Firefighter oxygen depletion systems."
The document summarizes the Kyoto Protocol agreement signed in 1999 where 189 countries agreed to reduce greenhouse gas emissions. It discusses how this led to increased demand for renewable fuels to replace fossil fuels. It then focuses on Brazil's role as a pioneer in large-scale renewable energy projects due to its climate and vast forests. The rest of the document describes Swiss Group's biomass operations in Brazil and other countries, its forestal management practices, production processes, products, technologies and goals of preserving the environment.
This document provides an overview of Ceilcote Air Pollution Control, including its history, capabilities, products, and experience with various air pollution control applications. Ceilcote has offices globally and over 50 years of experience with more than 1000 installations. Their products and systems are used for applications such as solar/microelectronics, chemical processes, waste water treatment, and incineration.
Cool Technologies:Working Without HCFCs &HFCsUNEP OzonAction
Environmental and economic imperatives
Overview and examples of fluorocarbon free-cooling technologies in many applications
Practical strategies for phasing out HFCs and bypassing HFCs by Janos Mate
From CO2 to Coal: Turning Back the ClockDon Basile
Over the much longer term, global warming could cause countless animal extinctions and even threaten the very existence of mankind itself. Thankfully, several leading solutions are being developed that could rewind the CO2 emissions clock. While scrubbing carbon dioxide from the air might seem impossible, it is very close to becoming a reality.
Isolcell Italia has 60 years of experience in research and development of fire prevention technologies. It develops oxygen reduction systems that generate an atmosphere with 15% less oxygen to prevent fires from starting. This is done using nitrogen generators that separate oxygen from air through a natural molecular sieving process. The systems maintain the oxygen-reduced atmosphere to keep areas protected without toxic or polluting residues. Isolcell offers turnkey fire prevention solutions including nitrogen generators, control units, sensors, and software to monitor and regulate oxygen levels.
Technological development in wet processing technologyRifad hossain
The document discusses recent technological developments in wet processing for the textile industry. It covers innovations in dyes and chemicals, preparation processes, dyeing techniques, and finishing methods. Some key developments mentioned include non-fluorine water repellents, enzyme-based fabric preparation processes, plasma technology applications, dyeing in supercritical fluids, foam finishing, and ultrasonic assisted textile processing. The overall focus of innovations is on improving sustainability by reducing energy and chemical usage while maintaining quality.
PURIFICATION OF AIR USING IMPREGNATED ACTIVATED CARBON PRODUCED FROM COCONUT ...IRJET Journal
This document summarizes a study on using impregnated activated carbon produced from coconut shells to purify air. The study was conducted in one of the most polluted industrial areas of Kerala, India, where many industries emit acidic pollutants like carbon dioxide, sulfur dioxide, and nitrogen oxides into the air. The objectives of the study were to examine the adsorption efficiency of impregnated activated carbon for these pollutants at various temperatures, understand how temperature affects adsorption, and investigate using impregnated activated carbon filters to remove pollutants from vehicle exhaust. The document provides background on air pollution sources and health effects. It was conducted at a company that produces activated carbon from coconut shells to analyze the adsorption kinetics
Aquapol the first naturale rising damp resolution device and technology. More than 50,000 installations in Europe.
Greentech srl Cantù (Como) Italy is an authorized representative in higher Lombardy (Italy) but we answer to any inquiry.
Air pollution Control Methods and Equipments by AmitabhAmitabh Gupta
This ppt shows Control methods of Air Pollution at Source level, reduction of air pollution at the individual level and innovation to control air pollution worldwide.
This document summarizes a project that studied the potential for a new porcelain ceramic tile called BIONICTILE® impregnated with a photoactive ingredient called OFFNOX® to reduce nitrogen oxide levels in the atmosphere. The project was conducted using the EUPHORE atmospheric simulation chambers, which are well equipped to simulate urban air pollution conditions. Results showed that the BIONICTILE® tiles were able to reduce nitric acid levels and uptake over 130 mg of NOx per square meter, representing a potential new way to help reduce air pollution in cities.
This document summarizes a project that studied the potential for a new porcelain ceramic tile called BIONICTILE® impregnated with a photoactive ingredient called OFFNOX® to reduce nitrogen oxide levels in the atmosphere. The project was conducted using the EUPHORE atmospheric simulation chambers, which are well equipped to simulate urban air pollution conditions. Results showed that the BIONICTILE® tiles were able to reduce nitric acid levels and uptake over 130 mg of NOx per square meter, representing a potential new way to help reduce air pollution in cities.
This document summarizes a project that studied the potential for a new porcelain ceramic tile called BIONICTILE® impregnated with a photoactive ingredient called OFFNOX® to reduce nitrogen oxide levels in the atmosphere. The project was conducted using the EUPHORE atmospheric simulation chambers, which are well equipped to simulate urban air pollution conditions. Results showed that the BIONICTILE® tiles were able to reduce nitric acid levels and uptake over 130 mg of NOx per square meter, representing a potential new way to help reduce air pollution in cities.
Epcon is One of the World's leading Manufacturing Companies.EpconLP
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one-man operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
Epcon has been engineering and manufacturing state-of-the art sustainable industrial solutions since 1977. We custom engineer our systems for optimal efficiency, and strive for next zero fuel consumption and emissions! Our returning customers are a testament to our success in providing quality systems and service.
Epcon has been engineering and manufacturing state-of-the art sustainable industrial solutions since 1977. We custom engineer our systems for optimal efficiency, and strive for next zero fuel consumption and emissions! Our returning customers are a testament to our success in providing quality systems and service.
Founded in 1977, Epcon has grown from a one man-operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment. With over 4,300 systems worldwide, an extensive Research & Development process and many patented designs, Epcon prides itself on delivering comprehensive systems that perform for decades. No two system are alike; every industrial process and application is one-of-a-kind, and that is why we specialize in systems specifically engineered and handcrafted, tailored to each unique manufacturing process and its operational demands.
Air pollution is a global problem and Epcon is committed to solving the problem through expert engineering and design services. We offer numerous solutions for control of pollution products, suitable for various industrial needs. We can employ H2S Scrubbers, Recuperative Thermal Oxidizer, Regenerative Thermal Oxidizer (RTO) or Catalytic Oxidizer, depending on your requirements. Our Thermal Oxidizers can be built to handle any size volume of gas. Customers can count on Epcon to design air pollution control systems or any number of custom systems specific to your process.
Epcon is an industry leader in Direct Fired Thermal Oxidizer (DFTO) control equipment technology specializing in custom modular units for stand alone as well as trailer-mounted applications. Epcon is pleased to offer different purchase, lease, and rental agreement options to suit any need.
Direct Fired Thermal Oxidizers may also be called Afterburners or Direct Flame Thermal Oxidizers. Thermal oxidation is a method of air pollution control that can be applied to incineration for air polluted with small particles or combustible solids or liquids.
Direct Fired Thermal Oxidizers are ideal solutions for high solvent loading and fluctuating operating conditions.
Epcon’s Regenerative Thermal Oxidizer (RTO) systems have been successfully utilized on hundreds of industrial VOC air pollution control applications since 1977. Epcon has extensive RTO design and installation experience with VOCs (Volatile Organic Compounds), hydrocarbons, solvents, and HAPs (Hazardous Air Pollutants) as well as particulate-laden processes which generally require pre-filtration prior to the RTO system. Because no two applications are alike, we look forward to preparing a custom RTO proposal for your specific application.
Epcon’s proprietary Recuperative Thermal Oxidizers are fabricated from select Stainless Steel Alloys to meet the process and duty cycle requirements for a given project.
Visit us for details https://epconlp.com/products/air-pollution-control/recuperative-thermal-oxidizers
PAVATEX is a leading manufacturer of wood fiber insulation materials in Europe. It has been producing wood fiber boards in Switzerland for over 70 years using a wet process that preserves the boards' natural bonding agents. PAVATEX boards provide high quality insulation that is carbon neutral and locks up carbon from the atmosphere. They have numerous sustainability benefits and can be used in a variety of building systems and materials to create high performing, breathable walls, roofs and floors with very low u-values.
The document discusses ZONAIR3D, a Spanish company that develops technological innovations related to air and its components. It focuses on their BUBBLE, pure air product, which creates a mobile, sterile environment containing 99.995% pure air. The BUBBLE provides numerous health benefits such as improved physical performance, faster recovery, anti-aging effects and reduced infection risk. It has applications in healthcare, wellness, sports and more. Technical details are given on the air filtration and circulation system that maintains the pure air inside the BUBBLE.
The document discusses using pressure swing adsorption with silver zeolites to produce a continuous flow of 99% oxygen from air. It aims to develop portable and hospital oxygen separation devices. Pressure swing adsorption uses adsorbent materials like zeolites and carbon nanotubes in two columns to separate oxygen from nitrogen and argon through selective adsorption. The document evaluates different zeolite materials and their ability to produce high purity oxygen while also removing nitrogen and argon. It also considers the economics of using such a system in hospitals and portable devices.
Epcon has been active in the 55 gallon steel drum manufacturing industry for 45+ year. This special proprietary system for dual laying and triple laying Wicket Ovens.
Terra Mar Architectural - These 8 Innovative Materials Will Revolutionize the...terramararchitectural
These materials include translucent wood, cement that generates light, floating piers, Martian concrete, lightweight seismic reinforcement, self-cooling walls, biodegradable furniture, pollution-absorbing bricks, and self-healing concrete. Scientists and engineers have developed these innovative materials to revolutionize the construction industry by enabling new architectural designs, improving sustainability, and reducing maintenance needs.
Andek Cocoon 560 is a liquid polymer coating that forms a tough, durable, waterproof and bacterial-resistant membrane when sprayed onto surfaces. It is well-suited for clean room environments that require constant cleaning and high abrasion resistance. Andek Cocoon 560 is also self-extinguishing. The document provides additional information on Andek Cocoon 560's properties and suitability for applications such as surgical clean rooms, labs, shower rooms, and auto maintenance facilities. The author, Sean T. Doyle, is available to discuss uses of Andek Cocoon 560 and other Andek products.
ECO-TQL is an Italian company that produces 100% natural latex pillows and mattresses. It started production in 1999 and has expanded over time, adding new production lines and increasing capacity. ECO-TQL prides itself on using innovative production processes and materials to create high-quality, breathable, and ergonomic latex products. It has received several certifications for its latex and production methods. The company aims to think globally and act locally through an international presence at trade shows and a network of agents abroad and across Italy.
طريقة N2 FIREFIGHTER®، التي وضعتها Isolcell S.p.A، تستخدم المعدات الكهربائية لتوليد مناخ منخفض فيه الأكسجين، وذلك باستخدام الفصل الجزيئي. هذه العملية الصديقة للبيئة والموفرة للطاقة تزيد من نسبة النيتروجين إلى الأكسجين في الهواء حتى تولد مناخ منخفض الأكسجين لا يمكن أن تبدأ فيه الحرائق.
Isolcell Italia has 60 years of experience in research and development of fire prevention technologies. It develops oxygen reduction systems that generate an atmosphere with 15% less oxygen to prevent fires from starting. This is done using nitrogen generators that separate oxygen from air through a natural molecular sieving process. The systems maintain the oxygen-reduced atmosphere to keep areas protected without toxic or polluting residues. Isolcell offers turnkey fire prevention solutions including nitrogen generators, control units, sensors, and software to monitor and regulate oxygen levels.
Technological development in wet processing technologyRifad hossain
The document discusses recent technological developments in wet processing for the textile industry. It covers innovations in dyes and chemicals, preparation processes, dyeing techniques, and finishing methods. Some key developments mentioned include non-fluorine water repellents, enzyme-based fabric preparation processes, plasma technology applications, dyeing in supercritical fluids, foam finishing, and ultrasonic assisted textile processing. The overall focus of innovations is on improving sustainability by reducing energy and chemical usage while maintaining quality.
PURIFICATION OF AIR USING IMPREGNATED ACTIVATED CARBON PRODUCED FROM COCONUT ...IRJET Journal
This document summarizes a study on using impregnated activated carbon produced from coconut shells to purify air. The study was conducted in one of the most polluted industrial areas of Kerala, India, where many industries emit acidic pollutants like carbon dioxide, sulfur dioxide, and nitrogen oxides into the air. The objectives of the study were to examine the adsorption efficiency of impregnated activated carbon for these pollutants at various temperatures, understand how temperature affects adsorption, and investigate using impregnated activated carbon filters to remove pollutants from vehicle exhaust. The document provides background on air pollution sources and health effects. It was conducted at a company that produces activated carbon from coconut shells to analyze the adsorption kinetics
Aquapol the first naturale rising damp resolution device and technology. More than 50,000 installations in Europe.
Greentech srl Cantù (Como) Italy is an authorized representative in higher Lombardy (Italy) but we answer to any inquiry.
Air pollution Control Methods and Equipments by AmitabhAmitabh Gupta
This ppt shows Control methods of Air Pollution at Source level, reduction of air pollution at the individual level and innovation to control air pollution worldwide.
This document summarizes a project that studied the potential for a new porcelain ceramic tile called BIONICTILE® impregnated with a photoactive ingredient called OFFNOX® to reduce nitrogen oxide levels in the atmosphere. The project was conducted using the EUPHORE atmospheric simulation chambers, which are well equipped to simulate urban air pollution conditions. Results showed that the BIONICTILE® tiles were able to reduce nitric acid levels and uptake over 130 mg of NOx per square meter, representing a potential new way to help reduce air pollution in cities.
This document summarizes a project that studied the potential for a new porcelain ceramic tile called BIONICTILE® impregnated with a photoactive ingredient called OFFNOX® to reduce nitrogen oxide levels in the atmosphere. The project was conducted using the EUPHORE atmospheric simulation chambers, which are well equipped to simulate urban air pollution conditions. Results showed that the BIONICTILE® tiles were able to reduce nitric acid levels and uptake over 130 mg of NOx per square meter, representing a potential new way to help reduce air pollution in cities.
This document summarizes a project that studied the potential for a new porcelain ceramic tile called BIONICTILE® impregnated with a photoactive ingredient called OFFNOX® to reduce nitrogen oxide levels in the atmosphere. The project was conducted using the EUPHORE atmospheric simulation chambers, which are well equipped to simulate urban air pollution conditions. Results showed that the BIONICTILE® tiles were able to reduce nitric acid levels and uptake over 130 mg of NOx per square meter, representing a potential new way to help reduce air pollution in cities.
Epcon is One of the World's leading Manufacturing Companies.EpconLP
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one-man operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
Epcon has been engineering and manufacturing state-of-the art sustainable industrial solutions since 1977. We custom engineer our systems for optimal efficiency, and strive for next zero fuel consumption and emissions! Our returning customers are a testament to our success in providing quality systems and service.
Epcon has been engineering and manufacturing state-of-the art sustainable industrial solutions since 1977. We custom engineer our systems for optimal efficiency, and strive for next zero fuel consumption and emissions! Our returning customers are a testament to our success in providing quality systems and service.
Founded in 1977, Epcon has grown from a one man-operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment. With over 4,300 systems worldwide, an extensive Research & Development process and many patented designs, Epcon prides itself on delivering comprehensive systems that perform for decades. No two system are alike; every industrial process and application is one-of-a-kind, and that is why we specialize in systems specifically engineered and handcrafted, tailored to each unique manufacturing process and its operational demands.
Air pollution is a global problem and Epcon is committed to solving the problem through expert engineering and design services. We offer numerous solutions for control of pollution products, suitable for various industrial needs. We can employ H2S Scrubbers, Recuperative Thermal Oxidizer, Regenerative Thermal Oxidizer (RTO) or Catalytic Oxidizer, depending on your requirements. Our Thermal Oxidizers can be built to handle any size volume of gas. Customers can count on Epcon to design air pollution control systems or any number of custom systems specific to your process.
Epcon is an industry leader in Direct Fired Thermal Oxidizer (DFTO) control equipment technology specializing in custom modular units for stand alone as well as trailer-mounted applications. Epcon is pleased to offer different purchase, lease, and rental agreement options to suit any need.
Direct Fired Thermal Oxidizers may also be called Afterburners or Direct Flame Thermal Oxidizers. Thermal oxidation is a method of air pollution control that can be applied to incineration for air polluted with small particles or combustible solids or liquids.
Direct Fired Thermal Oxidizers are ideal solutions for high solvent loading and fluctuating operating conditions.
Epcon’s Regenerative Thermal Oxidizer (RTO) systems have been successfully utilized on hundreds of industrial VOC air pollution control applications since 1977. Epcon has extensive RTO design and installation experience with VOCs (Volatile Organic Compounds), hydrocarbons, solvents, and HAPs (Hazardous Air Pollutants) as well as particulate-laden processes which generally require pre-filtration prior to the RTO system. Because no two applications are alike, we look forward to preparing a custom RTO proposal for your specific application.
Epcon’s proprietary Recuperative Thermal Oxidizers are fabricated from select Stainless Steel Alloys to meet the process and duty cycle requirements for a given project.
Visit us for details https://epconlp.com/products/air-pollution-control/recuperative-thermal-oxidizers
PAVATEX is a leading manufacturer of wood fiber insulation materials in Europe. It has been producing wood fiber boards in Switzerland for over 70 years using a wet process that preserves the boards' natural bonding agents. PAVATEX boards provide high quality insulation that is carbon neutral and locks up carbon from the atmosphere. They have numerous sustainability benefits and can be used in a variety of building systems and materials to create high performing, breathable walls, roofs and floors with very low u-values.
The document discusses ZONAIR3D, a Spanish company that develops technological innovations related to air and its components. It focuses on their BUBBLE, pure air product, which creates a mobile, sterile environment containing 99.995% pure air. The BUBBLE provides numerous health benefits such as improved physical performance, faster recovery, anti-aging effects and reduced infection risk. It has applications in healthcare, wellness, sports and more. Technical details are given on the air filtration and circulation system that maintains the pure air inside the BUBBLE.
The document discusses using pressure swing adsorption with silver zeolites to produce a continuous flow of 99% oxygen from air. It aims to develop portable and hospital oxygen separation devices. Pressure swing adsorption uses adsorbent materials like zeolites and carbon nanotubes in two columns to separate oxygen from nitrogen and argon through selective adsorption. The document evaluates different zeolite materials and their ability to produce high purity oxygen while also removing nitrogen and argon. It also considers the economics of using such a system in hospitals and portable devices.
Epcon has been active in the 55 gallon steel drum manufacturing industry for 45+ year. This special proprietary system for dual laying and triple laying Wicket Ovens.
Terra Mar Architectural - These 8 Innovative Materials Will Revolutionize the...terramararchitectural
These materials include translucent wood, cement that generates light, floating piers, Martian concrete, lightweight seismic reinforcement, self-cooling walls, biodegradable furniture, pollution-absorbing bricks, and self-healing concrete. Scientists and engineers have developed these innovative materials to revolutionize the construction industry by enabling new architectural designs, improving sustainability, and reducing maintenance needs.
Andek Cocoon 560 is a liquid polymer coating that forms a tough, durable, waterproof and bacterial-resistant membrane when sprayed onto surfaces. It is well-suited for clean room environments that require constant cleaning and high abrasion resistance. Andek Cocoon 560 is also self-extinguishing. The document provides additional information on Andek Cocoon 560's properties and suitability for applications such as surgical clean rooms, labs, shower rooms, and auto maintenance facilities. The author, Sean T. Doyle, is available to discuss uses of Andek Cocoon 560 and other Andek products.
ECO-TQL is an Italian company that produces 100% natural latex pillows and mattresses. It started production in 1999 and has expanded over time, adding new production lines and increasing capacity. ECO-TQL prides itself on using innovative production processes and materials to create high-quality, breathable, and ergonomic latex products. It has received several certifications for its latex and production methods. The company aims to think globally and act locally through an international presence at trade shows and a network of agents abroad and across Italy.
طريقة N2 FIREFIGHTER®، التي وضعتها Isolcell S.p.A، تستخدم المعدات الكهربائية لتوليد مناخ منخفض فيه الأكسجين، وذلك باستخدام الفصل الجزيئي. هذه العملية الصديقة للبيئة والموفرة للطاقة تزيد من نسبة النيتروجين إلى الأكسجين في الهواء حتى تولد مناخ منخفض الأكسجين لا يمكن أن تبدأ فيه الحرائق.
N2 FIREFIGHTER®: prevenzione incendi con sistema a riduzione di ossigeno CATA...Diego Gasser
Il sistema N2 FIREFIGHTER® è l'unico sistema che previene il rischio di incendio nell'ambiente protetto, semplicemente modificando le proporzioni dei gas normalmente presenti nell'atmosfera.
S.R.S (Sauerstoff-Reduzierungs-System)
Die N2 FIREFIGHTER® Methode verhindert das Entstehen oder die Ausbreitung eines offenen Feuers durch Zuführung von Stickstoff in die Atmosphäre des zu schützenden Bereiches
Mit Isolcell´s „N2 Firefighter“ Sauerstoff Reduzierungssystemen wird das Feuer Risiko völlig eliminiert und eine sichere Umgebung für Mensch, Gebäude und Güter geschaffen.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...IJECEIAES
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
2. The fire protection industry has gone through an evolutionary technology process during the last four decades. During my
professional career I had the pleasure and the privilege of being among the first to introduce these outstanding developments to
the Italian fire fighting industry.The guiding theme for these developments has been the protection of people, buildings and goods
in the most effective manner. Until recently, our focus was to discover a fire as quickly as possible and to extinguish it effectively.
Technological progress, careful and meticulous studies during these decades made it possible to greatly reduce the risk of fires in
general. However, a new method, based on the depletion of Oxygen, has opened completely new venues for us. We are now able
to create fully protected environments and to completely eliminate the fire hazard by changing the atmosphere within a building
by allowing full access to people at the same time. It is a revolution that finally, after decades of refining and re-inventing fire
extinguishing technology again and again, the same maybe obsolete in many cases.
Thanks to a radical change of perspective, we now eliminate the possibility of a fire to get started instead of thinking about how
to fight the fire.
FULL PREVENTION:
“THE DEPLETION OF OXYGEN”
Ing. Leonardo Corbo
3. 3
OVER 60 YEARS OF SOPHISTICATION
ISOLCELL: FROM PIONEER TO INTERNATIONAL TECHNOLOGY LEADER
We were the first in Europe who developed and applied a technique that allowed generating a Controlled Atmosphere within a building. In 1958 we started studying these technologies
and shortly after we created the first plants with a controlled atmosphere for preserving food. From here it was the logical consequence to extend the field of usage into various industries where a
controlled atmosphere was of advantage to the quality of goods and the process of manufacturing, from pharmaceuticals to chemicals, from plastic moulding to oenology or laser cutting. But also
for fire prevention or the conservation of artistic heritage. In the field of Controlled Atmosphere Isolcell is acknowledged to be the world leader. As part of an industrial group that owns “Finanziara
Unterland”, Isolcell S.p.A. is being represented around the globe by a network of accredited distributors and resellers. Needless to say that we are ISO 9001 Bureau Veritas certified Company and
our range of products and systems naturally comply with the strictest European and International Directives.
We offer to our customers highly customized and reliable solutions based on state of the art technologies.
A NATURAL AFFINITY TO IMPROVEMENT AND EVOLUTION.
Our story is closely linked to development of controlled atmosphere technologies. Our experience is our capital for steady
improvements and for the creation of innovative technologies. Our solutions reflect the demands of the market and are
reference for new technological standards.
4. 4
The ‘50s/‘60s The ‘70s The ‘80s
1958
Formation of Isolcell´s first head office in Bolzano, Italy. In Trentino Alto
Adige the first storages (cells) with controlled atmosphere for apples
and pears were created. The very first gastight storages were fitted with
bituminized aluminum foil, glued onto polystyrene panels. Isolcell intro-
duces the technology for the manual Volumetric Analysis of O2 and Co2
by the ORSAT method. In 1960, absolute tightness of the refrigeration
cells is being achieved by the revolutionary method of using polyester
resin reinforced with fiberglass.
1961
Isolcell presents exclusively the first adsorber for “carbon dioxide in dieth-
anolamine” automatically regenerated by applying heat, produced by Hall
Thermotank, UK.Two years later we start manufacturing the adsorber under
license. The strong demand for our products encourages us to focus on ex-
ports, and to conquer country by country throughout Europe. In 1963 we de-
veloped the first CO2 adsorber based on a solution of potassium carbonate.
1965
In partnership with “Sulzer, Switzerland”, the first adsorber for CO2 in
Regenerated cold active carbons is being developed. This machine rev-
olutionizes the CO2 adsorbtion technology, its principal is still the basis
for modern and up-to-date scrubbers.
1969
Isolcell designs DEOXO, a combustion catalytic converter for decreasing
the O2 content in the fruit conservation cells.
1970
We refine our catalytic technology by increasing its efficiency and we cre-
ate an open cycle propane combustion, ISOGEN. With this technology we
are the first in Italy producing pre fabricated steel-polyurethane-panels
for the quick and easy erection of cold stores with controlled atmosphere.
Simultaneously we develop an innovative acrylic resin with unique char-
acteristics, high elasticity, mechanical resistance, and easy to apply to
achieve gas impermeability. Isolcoat is a well recognized and highly de-
manded sealant, even today.
1972
Isolcell develops the first state of the art ultrasonic paramagnetic analyser
for accurate measuring of oxygen and carbon dioxide. Isolcell introduces
automation of A.C. plants by the use of electro mechanical programming
boards.The head quarter moves from Bolzano to Laives,our current location.
1978
We are the first in Europe using a low oxygen level atmosphere to disin-
fect food without using chemicals.This method will evolve to become the
worlds standard for ecological disinfections.
1980
Isolcell introduces the first combustion generator applied with a decar-
bonizer downstream of the combustion process of its ISOGEN nitrogen
generators thus being able to produce nitrogen without carbon dioxide
resedues. This evolutionary feature is an inherent part of all machines
from now on and as of it´s appreciation by customers world wide it will
last to end of the 90´s.
1982
In the USA a new technology based on the principal of molecular separa-
tion of the air has been discovered. Isolcell are the first to introduce this
revolutionary technology to Europe and creates the first N2 separator for
molecular filtration by using a hollow fiber nitrogen generator. Isolcell
are the first to introduce the ULO (ultra low oxygen) method for the fruit
conservation market. Compared to the classic refrigeration conservation
extremely low levels of Oxygen now triple the shelf life of fresh fruit in
cold storages. With the introduction of Personal Computers Isolcell are
the first to monitor, control and to manage A.C. plants fully electronically.
After the appearance of the first publications about the effect of ethylene
gas on the aging process of fruit and vegetables Isolcell starts producing
its own range of chemical scrubbers and catalytic ethylene generators.
1984
We are the first in the world to utilize the Controlled Atmosphere Tech-
nologies in the fresh fruit maritime transport industry. Isolcell starts pro-
ducing the first molecular sieve nitrogen generators with PSA (Pressure
Swing Adsorbtion) technology.
5. 5
The ‘90s The 2000s
1990
The outstanding success of our PSA systems encourages us to re-design
our product line making it modular and scalable. For the innovative system
of regenerating carbon dioxide adsorbers with nitrogen we get a patent
granted. The State Monopoly chooses our technique and builds the first
plant for disinfecting tobacco environmentally friendly by eliminating to-
bacco infesting parasites without the use of chemicals.
1994
Another patent is being granted. Isolcell introduces the first low pressure
and low energy consuming VSA (Vacuum Swing Adsorbtion) system. We
enter the wine industry by proposing our nitrogen generators.
1998
The new oxygen adsorber “Adox” is being developed and patented. It is
the evolution of the VSA, a system that until today is unbeaten in it´s ener-
gy efficiency. Wherever the oxygen level needs to be lowered in conjunc-
tion with maximum efficiency “Adox” is the preferred solution.
2000
We extend the range of our ethylene adsorbers by developing “DEOXYL
L.E.” (Low Energy) in order to achieve maximum energy efficiency an to
reduce the amount of heat in the fruit storage cells.
2001
For the archeological museum in Bolzano (Ötzi), Isolcell develops the con-
cept for the “full protection of historical and artistic discoveries” and the
first show room with protective atmosphere emerges. Beside the control
of temperature, relative humidity and residual oxygen the content of dust
and bacterial charge within the show room can be reduced.
2003
In the field of fruit conservation Isolcell introduces and patents the con-
cept of DCA (DynamicControlled Atmosphere) by assessing fluorescence
emissions, the spontaneous emission of light. We are selected to be the
worldwide exclusive partner of the Canadian Government for supplying
this technology. For the removal of CO2 the IS, Intelligent Scrubber, line
is being developed. Thus providing more performance and the ability of
maintaining so far unthinkable low levels of atmosphere within the DCA
storage. The Industry Division is born. Further active carbon scrubbers
are being developed.
2005
With the establishment of the “Fire Prevention Division” a new area of ap-
plication has been entered. The N2 Firefighter system, a modular range of
nitrogen generators, provides the most efficient oxygen depletion method
for protecting the environment, people and property from fire.
2009
After four years, going through tough certification processes, the N2
Firefighter Technology is being recognized and certified according to the
European Regulations. Isocell is being acknowledged as a certified manu-
facturer and Installer for fire prevention and security systems.
2012
Isolcell revolutionizes the fruit conservation market again by introducing
ECO, a high efficiency carbon dioxide adsorber. Compared to previous
generations it reduces the energy consumption by 50%, its efficiency
defines new standards in the market. At the same time we lodge another
patent, with the “staggered counters operation method” that allows par-
titioning within the PSA technology we reduce substantially the power
consumption and achieve an improved flow of nitrogen.
2013
GEN2ION, an innovative low oxygen paint system that guarantees con-
siderable reductions of costs of painting and improves the treated sur-
face significantly is being improved further.
2015
Isolcell introduces DAN2TE (Dynamic Atmosphere Nitrogen Treatment
Equipment) to disinfect and conserve historical artwork.
2016
New upgraded ADOX®
N2 ORS line launched: multibanking, modular and
programmable, specifically developed for fire prevention purposes.
2018
Isolcell introduces new technologies exclusively developed and dedicated
in compliance with the VdS Directive for Oxygen Reduction Fire Preven-
tion system. On that occasion we presented the new brand: N2 Oxygen
Reduction System.
7. 7
ISOLCELL
PREVENTION IS BETTER THAN BEING SORRY
All traditional fire fighting technologies or methods have the same problem in common, they are being used once the damage has
occurred already.Whatever media is in use, foam, water mist, sprinklers, gas or water they are being activated or used after a fire
has been detected. With the common and known methods fire is being fought only reactively. Often the damage caused by the
extinguishing media is worse than the damage caused by the fire itself. Furthermore, there are many applications such as Data
Centers, Server Rooms, Cold Stores, Paper Mills and many more where the usage of water or gas would be fatal in its consequence.
Whenever electricity comes into play the usage of water could end in a total disaster. Huge storages like cold store could not be
flooded from a gas reservoir for example.
Isolcell aims to provide the optimal solution for most of the above-mentioned applications to ensure absolute security by simply
making the development of a fire impossible.
COMPLETELY ELIMINATING THE FIRE HAZARD AND SAFEGUARDING PEOPLE,
BUILDINGS AND IT‘S CONTENT IS POSSIBLE WITH ISOLCELL‘S N2 OXYGEN
REDUCTION SYSTEM.
8. 8
INDEX
FIRE PREVENTION DIVISION
N2 OXYGEN REDUCTION SYSTEM11
HEALTH AND SECURITY16
N2 ORS
PRINCIPLE OF OPERATION 18
MADE BY ISOLCELL20
N2 ADOX ORS
Plug & Play22
N2 ORS DISPLAY 26
N2 ORS WEBSERVER27
VIRTUAL GRID28
ADVANTAGES29
STANDARDS AND REGULATIONS30
11. 11
FIRE PREVENTION DIVISION
N2 OXYGEN REDUCTION SYSTEM
Treating and controlling the atmosphere has been our business for over 60 years. New techniques have been developed, outstanding
innovations have paved our way.
The experience gained in over 60 years has inspired us to develop the N2 Oxygen Reduction System which enables us to generate
and to control an atmosphere in which a fire cannot get started.
N2 ORS monitors, and through a natural filtration process, changes the ration of gases normally present in the air we breathe, thus
creating a perpetually self-extinguishing atmosphere.As no chemicals or other artificial additives are being added in this process this
prevention method is absolutely environmentally friendly and safe to human beings.Therefore you may call it:“Green technology”.
• ONLY TECHNOLOGY THAT PREVENTS A FIRE TO GET STARTED
PROTECTION 24/7/365
• NO AESTHETIC DISTURBANCES INSIDE THE PROTECTED AREA
• ENVIRONMENTALLY SUSTAINABLE
• SIMPLE INSTALLATION EVEN IN ENVIRONMENTS SUBJECT TO STRONG
REGULATION RESTRAINS
• VERY LOW ENERGY CONSUMPTION
• MANAGEMENT AND MAINTENANCE FRIENDLY
• EASY INTEGRATION TO EXISTING FIRE PANELS AND/OR BUILDING
MANAGEMENT SYSTEMS
12. 12
“PREVENTION”
THE BETTER METHOD
All traditional and known fire-fighting methods have got one
thing in common: they are passive and react only once the fire
has started and the damage has occurred. What the fire has not
managed to destroy, huge amounts of water applied by hoses
or by sprinkler systems will do. Gas extinguishing systems also
depend on the fire to have started before they can be activated.
The release of the gas with extreme high pressures can cause
structural damages to the building or to the protecting worth
equipment, the extinguishing media used can probably cause
environmental damages or produce health and life threatening
circumstances. Malfunction of the extinguishing system can
threaten people, cause loss of production, loss of clients and
subsequently loss of the business.Therefore:“Prevention” is the
better method. It is always active, it does not need to react.
The N2 ORS completely eliminates the fear of fire, as the en-
vironment created does not allow a fire to get started from the
very beginning.
PREMISES IRREMEDIABLY
DAMAGED
...
THE PROBLEM
IS AVOIDABLE THANKS
TO THE METHOD
Examples of fires protected
with traditional extinguishing
systems: the environment has
not been safeguarded.
13. 13
HIGHLY RELIABLE,
FLEXIBLE,
SCALABLE AND
SUITABLE FOR:
COOL STORES
AUTOMATED HIGH BAY WAREHOUSES
AMBIENT TEMPERATURE WAREHOUSES
LIBRARIES AND ARCHIVES
MUSEUMS
DATA CENTERS
SERVER ROOMS
PETROCHEMICAL AND
PHARMACEUTICAL INDUSTRY
HOSPITALS ETC...
14. 14
CONCEPT
THE GENERATED AND CONTROLLED
ATMOSPHERE MAKES A FIRE IMPOSSIBLE
For a fire to ignite three elements are needed: Heat, combustibles and an oxidizing agent, usually oxygen. When these elements are present and in the right mixture a natural fire will occur. A fire can
be prevented or extinguished by removing any one of these elements. Once a fire has started, the exothermic chain reaction sustains the fire and allows it to continue until or unless at least one of the
elements of the fire is blocked. Traditional fire fighting methods either deny the burning fire the oxygen it needs or they lower the temperature of the fuel below the ignition point or by creating a barrier
of inert gases thus attacking the chemical reaction responsible for the fire.
WITH THE “N2 ORS” WE ACTIVELY PREVENT THE COMBUSTION PROCESS
TO GET STARTED BY UNINTERRUPTEDLY REDUCING THE AMOUNT OF OXYGEN.
FUEL FUEL FUEL FUEL
HEAT
OXYGEN19%
HEAT
OXYGEN20,95%
OXYGEN17%
HEAT
HEAT
OXYGEN
15. 15
THE METHODFIRE PREVENTION, ECOLOGICALLY,
ECONOMICALLY AND EFFICIENTLY
PERFECT PROTECTION OF YOUR PREMISES BY “N2 OXYGEN REDUCTION SYSTEM”
IN THE MOST ENVIRONMENTALLY FRIENDLY WAY.
When we talk about the air we breath we often and falsely talk about oxygen. In fact, the air we breath consists of 78,08 Vol.% of nitrogen und only 20,95 Vol.% of oxygen (0,93 Vol.% Argon and 0,04
Vol.% CO2).This ratio between nitrogen and oxygen is the same all over the world, high up in the mountains or low down at the sea.The food every fire needs to burn is the oxygen supplied by nature.
By modifying the atmosphere and changing the ration between these to ingredients N2 ORS denies the fire enough “food” to get established.The changed ratio has got the equivalent effect to human
beings as a stay in high altitude or when travelling by plane as the lower air pressure drives the molecules apart and the amount of oxygen inhaled with every breath is less than in lower atmospheres.
NITROGEN
78,08 vol.-%
OXYGEN
20,95 vol.-%
OTHER GASES
0,97 vol.-%
ATMOSPHERE
NITROGEN
82,5 vol.-%
OTHER GASES
0,50 vol.-%
OXYGEN
17,00 vol.-%
19. 19
TYPE SYSTEM
N2 ORS
Control unit Multiplex
ADOX®
Self-extinguishing
atmosphere generator
DISPLAY
Digital remote
OPTION 1
N2 ORS
Detection suction and
measurement
OPTION 2
N2 ORS
Point detector and
measuring method
THE N2 ORS 5926
10
09
08
07
06
05
04
03
02
Data Resp.DescrizioneRev.
Formato
A4
23/07/2018
Stampto il
INDUSTRY STORAGE OENOLOGYFIRE PREVENTIONCULTURAL HERITAGE
CONTROLLED ATMOSPHERE SINCE 1958
Responsabile
Oggetto
Quote senza indicazione di tolleranzaControllato
Complessivo di assemblaggio
Scala
AI TERMINI DI LEGGE CI RISERVIAMO LA PROPRIETÀ DEL PRESENTE
DISEGNO VIETANDONE LA RIPRODUZIONE E LA COMUNICAZIONE
Disegno
THIS DRAWING IS ISOLCELL'S PROPERTY - ANY COPYRIGHT
AND/OR COMMUNICATIONS TO THIRD PARTIES IS FORBIDDEN BY LAW
1:1.5
Codice
ISO 2768 - cL
Revisione
01
Data
01120
Disegnato
VERIFICARE LE MISURE
CHECK THE DIMENSIONS
G.C.
Modulo visualizzazione remota
4.0PL N2 FIREFIGHTER (pos. libero)
ISOLCELL S.p.A.
Single-member company
Via A. Meucci, 7 - 39055 Laives (BZ) ITALY
P +39 0471 95 40 50 - F +39 0471 95 35 75
isolcell@isolcell.com - www.isolcell.com
20. 20
TECHNOLOGY
FROM DESIGN TO PRODUCTION
76,75151,5076,75
83,7590,50291,75
466
305
R1
3,25
70151515
90
EXTERNAL N2 VERSORGUNG
ABSCHALTUNG
STEUERUNG
SAUERSTOFFALARM
STÖRUNG NETZ / AKKU
SYSTEMSTÖRUNG
STÖRUNG
BETRIEB
Riquadro da ritagliare
per lasciare passante
l' area
Scritte: carattere grassetto altezza 4.5 mm colore nero, se la
scritta risulta poco contrastata con lo sfondo rivedere il colore con
un grigio scuro o provare in bianco bordato nero
Ext. nitrogen supply
Disablements
Devices control
High/Low O2 Alarm
Energy fault
System fault
General fault
Power
Alluminio satinato Lamiera sp. 1 / 0.36
MATERIALE DESCRIZIONE TRATT. SUP. PESO Kg
4972-DE
Disegno Configurazione
Quote senza indicazione di tolleranza: Scala
Codice
Oggetto
EDCBAModifica
Data
Firma
Data Controllato ResponsabileDisegnato
AI TERMINI DI LEGGE CI RISERVIAMO LA PROPRIETÀ DEL PRESENTE
DISEGNO VIETANDONE LA RIPRODUZIONE E LA COMUNICAZIONE
THIS DRAWING IS ISOLCELL'S PROPERTY - ANY COPYRIGHT
AND/OR COMMUNICATIONS TO THIRD PARTIES IS FORBIDDEN BY LAW
VERIFICARE LE MISURE
CHECK THE DIMENSIONS
Via A. Meucci 7 Z.I. 39055 - Laives (BZ) Italy
Tel. +39 0471 954050 - Fax +39 0471 953575
e-mail: isolcell@isolcell.it web site: http:www.isolcell.it
Sostituisce il n°:
Sostituito dal n°:
Oxy / Controller
01 03022156
Alluminio per display
1:2ISO 2768 - cLT.S.T.S.G.C.19-08-2013
14-01-2014
G.C.
Engineering, manufacturing and installation of Oxygen Reduction Fire Prevention systems.
21. 21
TECHNOLOGY
MADE BY ISOLCELL
All components of our N2 ORS have been designed, developed and
manufactured by Isolcell.We are the only certified company in Italy that designs and
installs complete oxygen depletion fire prevention plants.
22. 22
PLUG & PLAY
Using special self-generating filters, with the ADOX®
N2 ORS, Isolcell has developed a modular system for gaining nitrogen in
a most ecological and very low energy consuming process.The ratio between O2 and N2 in the air of the area to be protected
is being changed without using additives. The result is “air”, odorless, colorless clean and fresh, except it does not allow a
fire to develop.
ADOX®
, a patented system, was designed for heavy duty usage (24/7/365) being extremely moderate in energy consumption
at the same time, thus being benchmark in its economy for nitrogen a self-producers.
Patent N. EP0880903-A1
• LONG-LIFE
• HIGH ENERGY EFFICIENCY
• MINIMUM WEAR AND MAINTENANCE FRIENDLY
23. 23
NEW ADOX®
N2ORS LINE
MODULAR SYSTEM ENSURING GREATER SECURITY
New upgraded ADOX®
N2ORS line launch: multibanking, modular and programmable, specifically developed for fire prevention
purposes whose peculiarities are a world record in terms of energy efficiency, improved ergonomics, high configurability and
last but not least the significant reduction of TCO (Total Cost of Ownership), achieved thanks to an accurate planning and to
the selection of the best components with very low maintenance. On top of the economical and ecological advantages provid-
ed, ADOX®
N2ORS is fully modular and can be enhanced even after commissioning or when the requirement has changed. Due to
its modular design ISOLCELL’S ADOX®
Swing Adsorbtion Generators cater for planned or even for unforeseen changes and gives
you the greatest flexibility possible.
GREAT FLEXIBILITY
SIZE DOESN`T MATTER, WE PROTECT FROM THE SMALLEST REPOSITORY
TO THE LARGEST VOLUMES
24. 24
SOUNDPROOFING OF THE NEW
ADOX®
N2 ORS LINE
HIGH SOUND PERFORMANCE OPTIMIZATION.
ONLY < 64 DB certified according to ISO 3744:2010
This amazing result has been achieved thanks to an accurate designing, planning and selection of the best components and high
performance sound proof cabinet.
The new upgraded ADOX N2 ORS has been designed in order to reduce drastically the noise level.
26. 26
NEW CUSTOMIZABLE N2 ORS DIGITAL DISPLAY
THE REMOTE VISUALISATION MODULE
The Remote Visualisation Module is an electronic device that shows Oxygen and other accessory parameters concerning the protected area and it is placed at every entrance of protected area(s).
It allows to enable/disable O2 protection level in the selected area as well as see fault messages given by the main Control Unit of the Oxygen Reduction System. Moreover it is possible to choose
different layout designs:
27. 27
N2 OXYGEN REDUCTION SYSTEM WEBSERVER:
ACCESS TO THE SYSTEM WITHOUT BEING PRESENT AT SITE
The new N2 ORS WebServer designed and developed by Isolcell is a control systems dedicated to data collection and remote control,
monitoring, diagnostic of the installed Oxygen Reduction Fire Prevention plant.
The N2 ORS WebServer removes all the restrictions related to distance between the user and the system.
The remote control access is possibile using a Computer, Smartphone or Tablet.
28. 28
VIRTUAL GRID
VARIABLE PITCH
Traditionally the oxygen is being measured in an area by using one or many point detectors, in some cases decentralized aspirating detectors are being used too. These detectors are logically put
together in groups and each group represents an average value measured by the single detectors. From all group values together a new average is being calculated and displayed.
ISOLCELL’s aim is to be as accurate as possible and to attain perfection. For that reason ISOLCELL has developed the Virtual Grid methodology. With the help of a pipe system air is being aspirated
from various heights within the protected area and even from the nucleus of the building. The aspirated air is being lead to oxygen devices that are equipped with 3 individual optical sensors. This
method ensures that the air from each point of analysis is being sensored by the same detectors and the precise value of oxygen is displayed. A further advantage is the long lifetime of the optical
sensors especially as electrochemical sensors tend to deteriorate quickly.
BENEFITS
• N2 BEING INJECTED ONLY WHERE NEEDED RESULTS IN
REDUCTION OF ENERGY CONSUMPTION
• HOMOGENEOUS DISTRIBUTION OF SELF-EXTINGUISHING
ATMOSPHERE
29. 29
N2 OXYGEN REDUCTION SYSTEM ADVANTAGES
• PROTECTED PREMISES ARE SAFE 24/7/365
• THE FIRE HAZARD IS COMPLETELY ELIMINATED
• NO CONSEQUENTIAL DAMAGES DUE TO FALSE ALARM
• NO CONSEQUENTIAL DAMAGES CAUSED BY HISTORICAL EXTINGUISHING AGENTS
• PREVENTION METHOD IS ENVIRONMENTALLY SAFE, NON-TOXIC, NON-POLLUTING, NON-RESIDUAL
• EASE OF INSTALLATION AND COST EFFECTIVE COMPARED TO STANDARD EXTINGUISHING METHODS
• DUE TO N2 OXYGEN REDUCTION SYSTEM TECHNOLOGY NO NEGATIVE AESTHETIC IMPACT TO THE BUILDING
• EASY PROTECTION EVEN IN AREAS DIFFICULT TO REACH OR SUBJECT TO STRONG REGULATION RESTRAINS
• CAN EASILY BE INTEGRATED WITH MAIN FIRE PANEL OR BUILDING MANAGEMENT SYSTEMS
• N2 OXYGEN REDUCTION SYSTEM IS MAINTENANCE FRIENDLY
• NO ADDITIONAL SPACE REQUIRED FOR TANKS, GAS CYLINDERS ETC.
• PROTECTIVE ATMOSPHERE SLOWS DOWN THE DEGRADING PROCESS OF CERTAIN MATERIALS
• N2 OXYGEN REDUCTION SYSTEM PROTECTS OBJECT OF ALL SIZES, FROM MINIATURE TO GIANT DIMENSIONS
• THE N2 OXYGEN REDUCTION SYSTEM FIRE PREVENTION METHOD IS SAFE TO HUMANS, THE AMOUNT OF OXYGEN AVAILABLE WITHIN THE PROTECTED AREA IS
SIMILAR TO THE AMOUNT OF OXYGEN PROVIDED BY NATURE IN HIGHER ALTITUDES
30. 30
STANDARDS AND REGULATIONS
OXYGEN REDUCTION SYSTEMS (ORS) ARE CATEGORIZED AS SAFETY SYSTEMS AND THEREFORE THEY MUST BE DESIGNED,
PLANNED, BUILT, INSTALLED, COMMISSIONED, AND MAINTAINED ACCORDING SPECIFIC APPLICABLE REGULATIONS.
Isolcell is currently the only Italian company that has obtained the certifications required to supply compliant ORS systems:
ÖNORM F 3073: Planning, engineering, assembly,
commissioning and servicing of oxygen reduction systems;
ÖNORM F 3007: Oxygen reduction system;
ÖNORM F 3008: Oxygen reduction system - CIE UNIT control
unit;
TRVB S 155: Engineering, installation and operation
requirements for oxygen reduction systems using nitrogen in
buildings from a fire prevention technology standpoint;
BSI PAS 95: 2011: Hypoxic fire prevention systems for
occupiable spaces;
EN 16750: 2017: The Company Isolcell has already applied for
European Standard certification for Fixed firefighting systems
- Oxygen reduction systems - Design, installation, planning
and maintenance;
Italian Ministerial Circular: (Protocol no. 0007059 of 21
May 2012); Consolidated Law, Decree of 3 August 2015
Approval of technical standards for fire prevention, pursuant to
article 15 of Italian Legislative Decree 139 of 8 March 2006,
published on 20 August 2015 in the Italian Official Gazette;
CCS: Conformity Certification Services Q-Plus Product
Verification Scheme For Fire Prevention (Oxygen Reduction
Systems);
VdS: The Company Isolcell has already applied for certification
for the purposes of Directive VdS 3527 for Interting and
Oxygen Reduction Systems – Panning and Installation;
System qualification test n. 168/C: Qualification tests on the
control and fire-fighting system, performed at the laboratory
authorized by Italian Ministry of Interior.
ISOLCELL is part of the work group for the
establishment of the world regulations for
the oxygen reduction fire prevention.