Brimrose
•Download as PPTX, PDF•
0 likes•220 views
This document discusses near-infrared (NIR) products including custom flow cells with flanges, transflectance probes, diffuse reflectance probes, and reflectance/transmission probes. It also describes a spool piece installed in a plant for in-line measurement with a very fast installation time of 2-3 hours and minimal shutdown period.
Report
Share
Report
Share
Recommended
ASU NanoFab NNIN workshop
This document provides information on the etch and plasma cleaning tools available at the ASU NanoFab facility. It describes several plasma etch tools for fluorine, chlorine, and general purpose etching of materials like silicon, dielectrics, III-Vs, and metals. Deep silicon etching tools and a xenon difluoride etcher for isotropic silicon etching are also summarized. Maintenance and conditioning procedures are reviewed along with potential future equipment additions.
Vapor phase technology 2011
The document provides an overview of lead free vapor phase reflow soldering. It discusses the basics, including understanding component variation, recommended time and temperature profiles, and how vapor phase technology ensures temperatures remain within specifications. The history of vapor phase is summarized, followed by explanations of how it works and how it addresses past challenges like tombstoning and environmental concerns. Solutions are presented for automation, throughput and maintaining consistent low temperatures compared to convection.
Solo lab isolators-v1-15
Solocontainment provides cost-effective and rapidly deployable flexible containment isolators for small-scale applications. The soloLAB isolator can be assembled and ready for use in minutes, providing barrier isolation to protect materials under investigation and the user. It has a large work space and multi-stage HEPA filtration to prevent contamination and dust escape. Custom configurations are available and the isolator is supplied with standard operating procedures for safe operation.
Performance Of Pb Free Solder Pastes At Different Reflow
The document analyzes defects from two Pb-free solder pastes (Alpha and Indium) subjected to three reflow profiles: in-spec, above-spec, and below-spec. Solder balling, cold solder, non-wetting, and dewetting were observed, with their likelihood increasing with profiles further from specifications. Defects varied between pastes and profiles depending on factors like temperature and ramp rates.
Vapor Phase Versus Convection Reflow
This document summarizes a comparison of vapor phase (VP) reflow and convection reflow for lead-free soldering. VP offers advantages including lower peak temperatures, an inert environment without nitrogen, improved solder wetting, and easier profiling. Testing showed equivalent reliability of joints formed by both methods. While convection risks overheating small components, VP provides uniform heating and avoids this. Profiling is simpler with VP due to consistent heat transfer across board types. Cleanliness testing found no difference between the methods.
Leak Detection - Tracer Gas Sniffing Technique
The direct probing of leaks to atmosphere technique is used to detect leaks in objects, which have been back-filled and pressurized with a tracer gas.
Low Temperature FAC
The document defines and discusses the phenomenon of low-temperature flow-accelerated corrosion (FAC), which can occur below 200°F. It summarizes operating experience with low-temperature FAC at several nuclear plants. The Electric Power Research Institute (EPRI) found susceptible areas in pressurized water reactors (PWRs) and boiling water reactors (BWRs) and made recommendations for inspections and analyses. The impact on corrosion susceptibility inspection projects is that piping downstream of condensate filters and demineralizers in PWRs, as well as low-oxygen areas in BWRs, should not be excluded from evaluations due to low temperatures.
Atroshchenko - Presence of residual Tin drops in Thermally diffused Nb3Sn
http://www.surfacetreatments.it/thinfilms
Presence of Residual Tin drops on Thermally Diffused Nb3Sn (Atroschenko Konstantin - 10')
Speaker: Atroschenko Konstantin - INFN-LNL | Duration: 10 min.
Recommended
ASU NanoFab NNIN workshop
This document provides information on the etch and plasma cleaning tools available at the ASU NanoFab facility. It describes several plasma etch tools for fluorine, chlorine, and general purpose etching of materials like silicon, dielectrics, III-Vs, and metals. Deep silicon etching tools and a xenon difluoride etcher for isotropic silicon etching are also summarized. Maintenance and conditioning procedures are reviewed along with potential future equipment additions.
Vapor phase technology 2011
The document provides an overview of lead free vapor phase reflow soldering. It discusses the basics, including understanding component variation, recommended time and temperature profiles, and how vapor phase technology ensures temperatures remain within specifications. The history of vapor phase is summarized, followed by explanations of how it works and how it addresses past challenges like tombstoning and environmental concerns. Solutions are presented for automation, throughput and maintaining consistent low temperatures compared to convection.
Solo lab isolators-v1-15
Solocontainment provides cost-effective and rapidly deployable flexible containment isolators for small-scale applications. The soloLAB isolator can be assembled and ready for use in minutes, providing barrier isolation to protect materials under investigation and the user. It has a large work space and multi-stage HEPA filtration to prevent contamination and dust escape. Custom configurations are available and the isolator is supplied with standard operating procedures for safe operation.
Performance Of Pb Free Solder Pastes At Different Reflow
The document analyzes defects from two Pb-free solder pastes (Alpha and Indium) subjected to three reflow profiles: in-spec, above-spec, and below-spec. Solder balling, cold solder, non-wetting, and dewetting were observed, with their likelihood increasing with profiles further from specifications. Defects varied between pastes and profiles depending on factors like temperature and ramp rates.
Vapor Phase Versus Convection Reflow
This document summarizes a comparison of vapor phase (VP) reflow and convection reflow for lead-free soldering. VP offers advantages including lower peak temperatures, an inert environment without nitrogen, improved solder wetting, and easier profiling. Testing showed equivalent reliability of joints formed by both methods. While convection risks overheating small components, VP provides uniform heating and avoids this. Profiling is simpler with VP due to consistent heat transfer across board types. Cleanliness testing found no difference between the methods.
Leak Detection - Tracer Gas Sniffing Technique
The direct probing of leaks to atmosphere technique is used to detect leaks in objects, which have been back-filled and pressurized with a tracer gas.
Low Temperature FAC
The document defines and discusses the phenomenon of low-temperature flow-accelerated corrosion (FAC), which can occur below 200°F. It summarizes operating experience with low-temperature FAC at several nuclear plants. The Electric Power Research Institute (EPRI) found susceptible areas in pressurized water reactors (PWRs) and boiling water reactors (BWRs) and made recommendations for inspections and analyses. The impact on corrosion susceptibility inspection projects is that piping downstream of condensate filters and demineralizers in PWRs, as well as low-oxygen areas in BWRs, should not be excluded from evaluations due to low temperatures.
Atroshchenko - Presence of residual Tin drops in Thermally diffused Nb3Sn
http://www.surfacetreatments.it/thinfilms
Presence of Residual Tin drops on Thermally Diffused Nb3Sn (Atroschenko Konstantin - 10')
Speaker: Atroschenko Konstantin - INFN-LNL | Duration: 10 min.
Distillation column level
The document describes a distillation column system with level as a variable. It discusses the challenges of inaccurate liquid level indication and outlines several level measurement technologies considered for use, including radar, guided wave radar, ultrasonic, capacitive, hydrostatic, radiation-based, vibration, and conductive sensors. Guided wave radar is chosen for its maintenance-free operation under pressure and temperature extremes. Column pressure will be measured with a pressure transmitter and flow will be controlled using orifice meter technology. Resistance temperature detectors are selected for temperature measurement. The controlled variables of the distillation column include pressure, distillate concentration and level, reflux level, and bottoms concentration and level, which will be manipulated using control valves adjusting condenser
Pure tone audiometry
This ppt is about pure tone audiometry which is a subjective audiological procedure done in ENT to assess hearing loss and its degree
Tesi master Silvia Deambrosis
Preparation of cavity walls has been one of the major problems in superconducting radio-frequency (SRF) accelerator technology. Accelerator performance depends directly on the physical and chemical characteristics at the SRF cavity surface.
The ambitious objective of this project is to study a cavity surface preparation process which is superior in terms of cost, performance, and safety, to the wet chemical process currently in use. Plasma based processes provide an excellent opportunity to achieve these goals.
Plasmas are chemically active media. Depending on the way they are activated and their working power, they can generate low or very high "temperatures" and are referred correspondingly as cold or thermal plasmas. This wide temperature range enables various applications for plasma technologies: surface coatings, waste destruction, gas treatments, chemical synthesis, machining ... many of these techniques have been industrialized.
A large number of important industrial plasma applications are carried out close to atmospheric pressure, in many cases in atmospheric air.
The fascinating possibility to perform cleaning and/or etching processes of RF cavities without the need of any vacuum pumping system has to be deeply explored realizing different atmospheric con gurations as corona plasma, rf resonance plasma, plasma jet and torch.
Thermal plasmas (especially arc plasma) were extensively industrialized, principally by aeronautic sector. Cold plasma technologies have been developed in the microelectronics but their vacuum equipment limits their implantation.
To avoid drawback associated with vacuum, several laboratories have tried to transpose to atmospheric pressure processes that work under vacuum for the moment. Their researches have led to various original sources.
In the textile sector, a number of plasma applications are conceivable and some have been tested in laboratory scale. The chemical functionality and/or the morphology of a ber surface can be altered in order to improve very dierent properties to tailor them for
certain demands. The wettability can be increased to achieve a better impregnation or a deeper dying or, in contrast; it also can be decreased to create a water repellent behavior.
New chemical functionalities on the surface can promote the reactivity with dyes. The water free removal of sizings seems to be possible. These are only a few examples that demonstrate the potential of this technology.
We decided to try to ignite a resonance atmospheric plasma into 1.5 GHz superconducting niobium cavities to perform a feasibility study. The second step has been the attempt to understand what really happens to the resonant structure internal surface. The most powerful tool consists in the atmospheric plasma treatment and fast rf characterization of 6 GHz small resonators.
Profiles - Why getting them right is important
In this presentation, Fred Dimock, Manager Process Technology, gives a comprehensive overview of thermal profiling including: recipes vs. profiles, material properties, TC accuracy, profilers and test vehicles, process window, heat transfer and oven control.
Glass Fused-to-Steel Bolted Tank Coating Quality
The document compares three common standards for specifying the quality of glass fused-to-steel coatings on bolted steel liquid storage tanks: ISO 28765, EEA, and AWWA D103. ISO has the most stringent requirements with 19 tests, while EEA has 15 tests and is less stringent. AWWA only requires thickness and a wet sponge holiday test. Each standard has different quality levels for applications. ISO has four levels covering municipal and industrial uses, while EEA has three levels for agriculture and industry. The standards differ significantly in their testing protocols and quality criteria.
Genie 745 production gas sampling system datasheet
The Production Gas Sampling System (PGSS) provides a liquid-free, low pressure sample from natural gas streams for process control analysis. It extracts the sample using a direct-drive probe, removes liquids using a coalescing filter and membrane separator, and reduces pressure using a heated regulator without Joule-Thomson cooling effects. Optional heat tubing allows compatibility with low and high dew points. The PGSS mounts directly onto pipelines for accurate sampling close to wellheads.
Sensistor Standard Presentation 2008 Lcb
The document discusses how hydrogen leak detection provides high quality leak testing. It summarizes the company's history starting in 1981 developing hydrogen-based leak detectors. It then outlines the company's product lines for outdoor plant, manual industrial, and automatic leak testing as well as ATEX-certified intrinsically safe devices. Hydrogen testing is described as simple, robust, and more sensitive than alternative methods.
T500 u caps
This document discusses improvements in nitrogen dioxide (NO2) measurement technology. It describes weaknesses in the traditional chemiluminescence method, such as indirect NO2 measurement and susceptibility to drift. The document then introduces the T500U analyzer, which measures NO2 directly using cavity attenuated phase shift technology, without conversions or ambient interferences. Maintenance of the T500U is minimal, involving annual filter changes and biennial pump replacement. It offers enhanced specifications compared to previous analyzer models.
Ifl 700 iq sludge level measurement wtw
Ifl 700 iq sludge level measurement - WTW - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Mill-Pro-XS-hot-cure-LongKey-process-Jan-2014-rev2
The document describes hot applied, hot cured ultra high build epoxy coatings called Interzone 954XS and Sigmasheild 880XS. It discusses their automatic application process which includes blasting, pre-heating steel, overlapping spray application and post curing to achieve full hardness in 10 minutes. The coatings provide improved performance through a LongKey process and have a track record of protecting structures for 15 years.
PSC-Best Practices for Using Near Infrared Instrumentation for the Frac Sand ...
An overview of using near infrared (NIR) instrumentation to measure moisture in frac sand. Presented by Marty Peters at 2020 North America Frac Sand Conference
Speciality Water Bath - SWBC22, SWB30
This document summarizes the features and applications of Shel Lab circulating and deep chamber water baths. Key features include precise temperature control, recessed heating elements to prevent hot spots, and easy-to-clean polymer-coated stainless steel tanks. The water baths are suitable for applications such as sample thawing, bacteriological examinations, and microbiological assays. They offer accurate temperature control from ambient to 80°C.
High pressure full-bore flow meter
In IBJ Technology mud flowmeters the two
ultrasonic transducers are placed at an angle
in relation to the pipe axis. The transducers
function as transmitters and receivers of the
ultrasonic signals. Measurement is
performed by determining the time the
ultrasonic signal takes to travel with and
against the flow.
Properties: -For all drilling muds suited
-No limitation by cuttings and weight
-For all flange sizes and standards
-High Pressure class 2500 possible
Enhancements: -Acoustic Attenuation Spectroscope
-Solids & Cutting Separator control
Iron_Removal_Filter
The document discusses the DMI-65 Iron Removal Filter system from ROTEK for removing iron, manganese, and arsenic from water supplies. The DMI-65 filter uses a catalytic media that removes these contaminants through oxidation and precipitation without using chemicals. The system offers advantages like operating in a wide pH range, higher flow rates, temperatures up to 45°C, and long filter life. It also details specifications for various models with different tank sizes and flow rates.
Lab Automation for Sample Prep Digestions, Dilutions, Transfers and more.
The first step for accurate metals analysis is bringing diverse samples into a mineralized state by applying precise levels of heat and reagents. Questron Technologies has dedicated twenty years in finding solutions to this complex process. For more Details Visit now-: https://qtechcorp.com/
LabClear Gas Filters & Oxiclear Gas Purifiers Brochure
LabClear, a Division of Diamond Tool & Die, Inc. was founded in 1976 by Don Holt. Our LabClear™ filters and OxiClear™ purifiers are trusted names in gas filtration and purification applications. We provide specialty-gas users with superb products to filter out moisture, hydrocarbons and oxygen. These filters and purifiers produce ultra-pure gas for chromatography, crystal and chip manufacturing, robotics and carbon nanotube manufacturing, where gas must be clean and moisture free. With a wide range of sizes and configurations available, let LabClear™ and OxiClear™ provide you with the filters and purifiers to meet your requirements.
To learn more about LabClear gas filters and OxiClear gas purifiers, go to www.labclear.com.
Process and Input Material Control Using Handheld X-Ray Fluorescence
This presentation from AISTech 2018 covers the following topics:
- X-Ray Fluorescence (XRF) Theory
- Handheld X-Ray Fluorescence (HHXRF) Alloy Verification
- Compositional Results
- Other Process-Related Material Analyses
- Integration/Management of Process Data
For more information, visit: https://www.olympus-ims.com/en/xrf-xrd/xrf-handheld/
Experimentalstudy measurement of sonic speed of drilling muds under shear stress
The measurement of sound velocity and damping took place at IBJ technology with other acoustic and electric parameters and under realistic conditions with shear stress of the drilling muds. The measurement of the speed of sound is practical with the concept of the Ultrasonic sensors.
Interference by rotating drill strands are not to be expected. The depth and range of the sensors safely exceeds the damping of the mud. Even in the most absorbing mud (20.2 lb/gal), the penetration depth is 10 x the distance of the s
The measurement of the flow of drilling mud is possible also with all commonly used drilling sludge and diameters of pipelines
Hamm show
The document contains a series of identical links to a LinkedIn profile page in Portuguese. It does not provide any other text, images, or substantive information.
Instituto israelita de ensino e pesquisa albert einstein
This document is a series of repeated links to a LinkedIn profile page. It does not contain any other text or information. The high-level summary is that this document solely consists of multiple duplicate links to an unspecified LinkedIn user profile, without providing any additional context or substance.
Familiy & Friends
The document discusses several people and their interests in different career paths, including Fabian who enjoys painting and may pursue design, Gabriel's dream of being a sports reporter, and Christine's work as a medical assistant helping people. It also mentions Andrea's interest in technology and her work with a women in technology group. The document provides information on fears of starting a job, considerations for hiring in Bangalore such as working for a reputable company, and notes that Florentin has left his team to pursue mainstream technologies. It discusses networking organizations and improving software engineering.
How tosolveproblems
The document outlines Joachim Tesmer's process for solving problems by the July 29th deadline. It involves understanding the problem by listening to people involved like teachers and students. Drawing from 18 years of software development experience and discussing similar problems in an agile development approach. The process also includes creating a common understanding through sketching ideas, storyboarding, decomposing the story into tasks on a task board, and getting feedback on prototypes to check for ease of understanding, missing parts, and ways to improve before the deadline.
More Related Content
What's hot
Distillation column level
The document describes a distillation column system with level as a variable. It discusses the challenges of inaccurate liquid level indication and outlines several level measurement technologies considered for use, including radar, guided wave radar, ultrasonic, capacitive, hydrostatic, radiation-based, vibration, and conductive sensors. Guided wave radar is chosen for its maintenance-free operation under pressure and temperature extremes. Column pressure will be measured with a pressure transmitter and flow will be controlled using orifice meter technology. Resistance temperature detectors are selected for temperature measurement. The controlled variables of the distillation column include pressure, distillate concentration and level, reflux level, and bottoms concentration and level, which will be manipulated using control valves adjusting condenser
Pure tone audiometry
This ppt is about pure tone audiometry which is a subjective audiological procedure done in ENT to assess hearing loss and its degree
Tesi master Silvia Deambrosis
Preparation of cavity walls has been one of the major problems in superconducting radio-frequency (SRF) accelerator technology. Accelerator performance depends directly on the physical and chemical characteristics at the SRF cavity surface.
The ambitious objective of this project is to study a cavity surface preparation process which is superior in terms of cost, performance, and safety, to the wet chemical process currently in use. Plasma based processes provide an excellent opportunity to achieve these goals.
Plasmas are chemically active media. Depending on the way they are activated and their working power, they can generate low or very high "temperatures" and are referred correspondingly as cold or thermal plasmas. This wide temperature range enables various applications for plasma technologies: surface coatings, waste destruction, gas treatments, chemical synthesis, machining ... many of these techniques have been industrialized.
A large number of important industrial plasma applications are carried out close to atmospheric pressure, in many cases in atmospheric air.
The fascinating possibility to perform cleaning and/or etching processes of RF cavities without the need of any vacuum pumping system has to be deeply explored realizing different atmospheric con gurations as corona plasma, rf resonance plasma, plasma jet and torch.
Thermal plasmas (especially arc plasma) were extensively industrialized, principally by aeronautic sector. Cold plasma technologies have been developed in the microelectronics but their vacuum equipment limits their implantation.
To avoid drawback associated with vacuum, several laboratories have tried to transpose to atmospheric pressure processes that work under vacuum for the moment. Their researches have led to various original sources.
In the textile sector, a number of plasma applications are conceivable and some have been tested in laboratory scale. The chemical functionality and/or the morphology of a ber surface can be altered in order to improve very dierent properties to tailor them for
certain demands. The wettability can be increased to achieve a better impregnation or a deeper dying or, in contrast; it also can be decreased to create a water repellent behavior.
New chemical functionalities on the surface can promote the reactivity with dyes. The water free removal of sizings seems to be possible. These are only a few examples that demonstrate the potential of this technology.
We decided to try to ignite a resonance atmospheric plasma into 1.5 GHz superconducting niobium cavities to perform a feasibility study. The second step has been the attempt to understand what really happens to the resonant structure internal surface. The most powerful tool consists in the atmospheric plasma treatment and fast rf characterization of 6 GHz small resonators.
Profiles - Why getting them right is important
In this presentation, Fred Dimock, Manager Process Technology, gives a comprehensive overview of thermal profiling including: recipes vs. profiles, material properties, TC accuracy, profilers and test vehicles, process window, heat transfer and oven control.
Glass Fused-to-Steel Bolted Tank Coating Quality
The document compares three common standards for specifying the quality of glass fused-to-steel coatings on bolted steel liquid storage tanks: ISO 28765, EEA, and AWWA D103. ISO has the most stringent requirements with 19 tests, while EEA has 15 tests and is less stringent. AWWA only requires thickness and a wet sponge holiday test. Each standard has different quality levels for applications. ISO has four levels covering municipal and industrial uses, while EEA has three levels for agriculture and industry. The standards differ significantly in their testing protocols and quality criteria.
Genie 745 production gas sampling system datasheet
The Production Gas Sampling System (PGSS) provides a liquid-free, low pressure sample from natural gas streams for process control analysis. It extracts the sample using a direct-drive probe, removes liquids using a coalescing filter and membrane separator, and reduces pressure using a heated regulator without Joule-Thomson cooling effects. Optional heat tubing allows compatibility with low and high dew points. The PGSS mounts directly onto pipelines for accurate sampling close to wellheads.
Sensistor Standard Presentation 2008 Lcb
The document discusses how hydrogen leak detection provides high quality leak testing. It summarizes the company's history starting in 1981 developing hydrogen-based leak detectors. It then outlines the company's product lines for outdoor plant, manual industrial, and automatic leak testing as well as ATEX-certified intrinsically safe devices. Hydrogen testing is described as simple, robust, and more sensitive than alternative methods.
T500 u caps
This document discusses improvements in nitrogen dioxide (NO2) measurement technology. It describes weaknesses in the traditional chemiluminescence method, such as indirect NO2 measurement and susceptibility to drift. The document then introduces the T500U analyzer, which measures NO2 directly using cavity attenuated phase shift technology, without conversions or ambient interferences. Maintenance of the T500U is minimal, involving annual filter changes and biennial pump replacement. It offers enhanced specifications compared to previous analyzer models.
Ifl 700 iq sludge level measurement wtw
Ifl 700 iq sludge level measurement - WTW - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Mill-Pro-XS-hot-cure-LongKey-process-Jan-2014-rev2
The document describes hot applied, hot cured ultra high build epoxy coatings called Interzone 954XS and Sigmasheild 880XS. It discusses their automatic application process which includes blasting, pre-heating steel, overlapping spray application and post curing to achieve full hardness in 10 minutes. The coatings provide improved performance through a LongKey process and have a track record of protecting structures for 15 years.
PSC-Best Practices for Using Near Infrared Instrumentation for the Frac Sand ...
An overview of using near infrared (NIR) instrumentation to measure moisture in frac sand. Presented by Marty Peters at 2020 North America Frac Sand Conference
Speciality Water Bath - SWBC22, SWB30
This document summarizes the features and applications of Shel Lab circulating and deep chamber water baths. Key features include precise temperature control, recessed heating elements to prevent hot spots, and easy-to-clean polymer-coated stainless steel tanks. The water baths are suitable for applications such as sample thawing, bacteriological examinations, and microbiological assays. They offer accurate temperature control from ambient to 80°C.
High pressure full-bore flow meter
In IBJ Technology mud flowmeters the two
ultrasonic transducers are placed at an angle
in relation to the pipe axis. The transducers
function as transmitters and receivers of the
ultrasonic signals. Measurement is
performed by determining the time the
ultrasonic signal takes to travel with and
against the flow.
Properties: -For all drilling muds suited
-No limitation by cuttings and weight
-For all flange sizes and standards
-High Pressure class 2500 possible
Enhancements: -Acoustic Attenuation Spectroscope
-Solids & Cutting Separator control
Iron_Removal_Filter
The document discusses the DMI-65 Iron Removal Filter system from ROTEK for removing iron, manganese, and arsenic from water supplies. The DMI-65 filter uses a catalytic media that removes these contaminants through oxidation and precipitation without using chemicals. The system offers advantages like operating in a wide pH range, higher flow rates, temperatures up to 45°C, and long filter life. It also details specifications for various models with different tank sizes and flow rates.
Lab Automation for Sample Prep Digestions, Dilutions, Transfers and more.
The first step for accurate metals analysis is bringing diverse samples into a mineralized state by applying precise levels of heat and reagents. Questron Technologies has dedicated twenty years in finding solutions to this complex process. For more Details Visit now-: https://qtechcorp.com/
LabClear Gas Filters & Oxiclear Gas Purifiers Brochure
LabClear, a Division of Diamond Tool & Die, Inc. was founded in 1976 by Don Holt. Our LabClear™ filters and OxiClear™ purifiers are trusted names in gas filtration and purification applications. We provide specialty-gas users with superb products to filter out moisture, hydrocarbons and oxygen. These filters and purifiers produce ultra-pure gas for chromatography, crystal and chip manufacturing, robotics and carbon nanotube manufacturing, where gas must be clean and moisture free. With a wide range of sizes and configurations available, let LabClear™ and OxiClear™ provide you with the filters and purifiers to meet your requirements.
To learn more about LabClear gas filters and OxiClear gas purifiers, go to www.labclear.com.
Process and Input Material Control Using Handheld X-Ray Fluorescence
This presentation from AISTech 2018 covers the following topics:
- X-Ray Fluorescence (XRF) Theory
- Handheld X-Ray Fluorescence (HHXRF) Alloy Verification
- Compositional Results
- Other Process-Related Material Analyses
- Integration/Management of Process Data
For more information, visit: https://www.olympus-ims.com/en/xrf-xrd/xrf-handheld/
Experimentalstudy measurement of sonic speed of drilling muds under shear stress
The measurement of sound velocity and damping took place at IBJ technology with other acoustic and electric parameters and under realistic conditions with shear stress of the drilling muds. The measurement of the speed of sound is practical with the concept of the Ultrasonic sensors.
Interference by rotating drill strands are not to be expected. The depth and range of the sensors safely exceeds the damping of the mud. Even in the most absorbing mud (20.2 lb/gal), the penetration depth is 10 x the distance of the s
The measurement of the flow of drilling mud is possible also with all commonly used drilling sludge and diameters of pipelines
What's hot (18)
Genie 745 production gas sampling system datasheet
Genie 745 production gas sampling system datasheet
Mill-Pro-XS-hot-cure-LongKey-process-Jan-2014-rev2
Mill-Pro-XS-hot-cure-LongKey-process-Jan-2014-rev2
PSC-Best Practices for Using Near Infrared Instrumentation for the Frac Sand ...
PSC-Best Practices for Using Near Infrared Instrumentation for the Frac Sand ...
Lab Automation for Sample Prep Digestions, Dilutions, Transfers and more.
Lab Automation for Sample Prep Digestions, Dilutions, Transfers and more.
LabClear Gas Filters & Oxiclear Gas Purifiers Brochure
LabClear Gas Filters & Oxiclear Gas Purifiers Brochure
Process and Input Material Control Using Handheld X-Ray Fluorescence
Process and Input Material Control Using Handheld X-Ray Fluorescence
Experimentalstudy measurement of sonic speed of drilling muds under shear stress
Experimentalstudy measurement of sonic speed of drilling muds under shear stress
Viewers also liked
Hamm show
The document contains a series of identical links to a LinkedIn profile page in Portuguese. It does not provide any other text, images, or substantive information.
Instituto israelita de ensino e pesquisa albert einstein
This document is a series of repeated links to a LinkedIn profile page. It does not contain any other text or information. The high-level summary is that this document solely consists of multiple duplicate links to an unspecified LinkedIn user profile, without providing any additional context or substance.
Familiy & Friends
The document discusses several people and their interests in different career paths, including Fabian who enjoys painting and may pursue design, Gabriel's dream of being a sports reporter, and Christine's work as a medical assistant helping people. It also mentions Andrea's interest in technology and her work with a women in technology group. The document provides information on fears of starting a job, considerations for hiring in Bangalore such as working for a reputable company, and notes that Florentin has left his team to pursue mainstream technologies. It discusses networking organizations and improving software engineering.
How tosolveproblems
The document outlines Joachim Tesmer's process for solving problems by the July 29th deadline. It involves understanding the problem by listening to people involved like teachers and students. Drawing from 18 years of software development experience and discussing similar problems in an agile development approach. The process also includes creating a common understanding through sketching ideas, storyboarding, decomposing the story into tasks on a task board, and getting feedback on prototypes to check for ease of understanding, missing parts, and ways to improve before the deadline.
Portfólio - LDA Equipamentos Rodoviários
A empresa LDA Equipamentos Rodoviários fabrica usinas de asfalto, solos e micro pavimentos, além de distribuidores de cimento e cal, utilizando tecnologias próprias para produção de materiais para construção civil.
How to stop cyber bullying
Describe How to stop cyber bullying including what is cyber bullying, ways of cyber bullying, recognize cyber bullies and understand your role in prevention of cyber bullying. Also how you can raise you voice with Viraj Puri.
Viewers also liked (7)
Instituto israelita de ensino e pesquisa albert einstein
Instituto israelita de ensino e pesquisa albert einstein
More from Eng° Paulo Silva
Catálogo Geral da LDA Equipamentos
O documento é um catálogo de produtos da LDA Equipamentos Rodoviários e Agrícolas que produz diversos equipamentos como usinas de asfalto, tanques pipa, espargidores de asfalto, distribuidores de cimento e comboios de lubrificação em sua fábrica de 40.000m2 às margens da Rodovia Anhanguera. O catálogo descreve os modelos e usos dos diferentes produtos fabricados pela empresa.
Roadexpobrasil parcial
This document is a LinkedIn profile page containing basic professional information about an individual. It includes details such as their name, location, contact information, work history, skills and education to provide an overview of their background and qualifications. The profile aims to connect the person to others in their professional network on LinkedIn.
Simulacao 6 maquinas
This document contains repeated links to a LinkedIn profile page. It does not contain any other text or meaningful information to summarize. The document consists solely of repetitive links to http://www.linkedin.com/in/curriculo/pt with no other context provided.
Outras informações da Dynapac
This LinkedIn profile page provides biographical information about an individual named Curriculo. It lists their work experience, including current employment as an Analyst Programmer at Company X since January 2015. It also provides their education history, having studied Computer Science at University Y from 2010 to 2014.
Portifólio da B+L
O documento descreve os produtos e serviços da empresa Bran+Luebbe no Brasil, incluindo analisadores automáticos, bombas dosadoras, indicadores eletrônicos e equipamentos para dosagem de sólidos para alta precisão. Detalha também os mercados atendidos como alimentos, farmacêutico, químico e cosméticos, com aplicações em análises de umidade, proteína, gordura e outros parâmetros.
Outras informações da Brimrose
This LinkedIn profile page provides biographical information about an individual named Curriculo. It lists their work experience, including current employment as an Analyst Programmer at Company X since January 2015. It also provides their education history, having studied Computer Science at University Y from 2010 to 2014.
Portifólio Alfa Laval - Div B+L
This document is a LinkedIn profile page containing basic professional information about an individual. It includes details such as their name, current position, past work experience, education history and contact information. The profile aims to provide a high-level overview of the person's qualifications and career background.
Dynapac
This document contains multiple links to a LinkedIn profile page. It does not contain any other text, images or substantive information. The high-level information provided is a series of repeated links to an individual's LinkedIn profile.
Wirtgen
The document is a LinkedIn profile page containing basic professional information about an individual. It includes details such as their name, location, contact information, experience history working in various roles, education background, skills and abilities. The profile aims to provide a high-level professional summary and online presence for the individual on the LinkedIn networking platform.
Portifolio Comingersoll
A empresa atua na distribuição de máquinas e equipamentos pesados para indústrias, construção e infraestrutura no Brasil. Possui sede em Sorocaba-SP e filiais em São Paulo, Ribeirão Preto, Rio de Janeiro e Serra-ES. Participa frequentemente de feiras do setor como Brasil Road Expo, Agri Show e Expoforest.
More from Eng° Paulo Silva (17)
Recently uploaded
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership at Agile Tour Geneve 2024
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Schedule Unveiled
-- June 2024 is National Volunteer Month --
Check out our June display of books on voluntary organisations
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-inspired to the data-driven praxis (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
Building Your Employer Brand with Social Media
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
How MJ Global Leads the Packaging Industry.pdf
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
buy old yahoo accounts buy yahoo accounts
As a business owner, I understand the importance of having a strong online presence and leveraging various digital platforms to reach and engage with your target audience. One often overlooked yet highly valuable asset in this regard is the humble Yahoo account. While many may perceive Yahoo as a relic of the past, the truth is that these accounts still hold immense potential for businesses of all sizes.
2022 Vintage Roman Numerals Men Rings
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto RicoCorey Perlman, Social Media Speaker and Consultant
Social media for business Company Valuation webinar series - Tuesday, 4 June 2024
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSRecently uploaded (20)
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership Agile Tour Geneve 2024
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto Rico
Company Valuation webinar series - Tuesday, 4 June 2024
Company Valuation webinar series - Tuesday, 4 June 2024
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Brimrose
- 29. NIR Products
- 30. NIR Products
- 31. NIR Products
- 32. NIR Products
- 33. NIR Products
- 34. NIR Products
- 35. Inside View
- 36. Custom Design
- 37. Flow Cell with Flange
- 39. Custom Probe
- 42. Reflectance / Transmission Probe w/ trigging switch
- 43. Spool Pieces •In-Line Measurement -- no sampling system •Spool Piece manufactured in-house at Brimrose •Shipped to Norway -- installed in plant •Very fast install time -- short shutdown period (2 to 3 hours)
- 44. Spool Piece Installed on Plant
- 46. AOTF-NIR Free Space in Place
- 47. Cross-flow cell
- 48. Gas Cell
- 49. Refap
- 50. Recap