Brian Coree is a highly experienced pavement engineer and materials engineer seeking a new role. He has over 30 years of experience in quality control, research, testing procedures, and report checking for pavement projects. He has worked in both public sector roles for the Kansas and Iowa Departments of Transportation as well as in consulting. Coree has extensive publications and presentations on pavement design, materials, and implementation of new specifications. He is committed to managing complex projects on time and to a high standard while fostering collaboration.
The document lists the technical skills, publications, presentations, workshops, and meetings of an individual. It includes proficiency with various computer software programs for design, scheduling, and statistical analysis. Ten technical publications and presentations from 2005 to 2011 are listed relating to pavement design, materials properties, and performance. Attendance at various workshops and meetings from 2004 to 2011 focusing on pavement and transportation engineering topics are also noted.
Blake Hardin is seeking a career in inspection, data tech, or as a party chief with over 10 years of experience in natural gas surveying. He has extensive experience using GPS, total stations, and other surveying equipment to conduct pipeline surveys and collect field notes. His work history includes roles as an instrument man and party chief at several surveying companies. He has a background in pipe and utility location, survey control, map reading, and coordinating survey data.
Sisay Debele Gudeta has over 20 years of experience as a geotechnical and material engineer in Ethiopia. He has extensive experience conducting geotechnical investigations for various infrastructure projects including roads, bridges, buildings, and dams. Some of his recent projects include serving as the senior geotechnical engineer for the Ali-Ethiopia-Deghamido 146Km Road Project and the Diredawa-Dewelle Road Design and Construction Project. He is proficient in conducting field investigations, laboratory testing, and geotechnical reporting.
The document discusses transportation sustainability and growing transportation options in Tulsa. It notes that transportation accounts for 70% of petroleum use in the US and 33% of greenhouse gas emissions. Nearly 30% of trips in metro areas are less than 1 mile. The document then summarizes Tulsa's regional transit system plan, which includes commuter, urban, and circulator services. It focuses on plans to improve the Peoria Avenue corridor, including the potential for bus rapid transit between downtown Tulsa and 71st Street. Projections estimate ridership on a Peoria BRT line could increase over 125% in 7 years to nearly 5,000 daily riders.
Mohammad Faysal is a Ph.D. candidate in Civil Engineering at the University of Texas at Arlington, with a focus on geotechnical and geo-environmental engineering. He has over 5 years of experience in geotechnical engineering projects, research, and analysis. His research at UT Arlington involves evaluating recycled materials for pavement bases and determining in-situ properties. He has published several papers on his research findings. Faysal holds a B.S. in Civil Engineering from Bangladesh University of Engineering & Technology and is a certified Engineer in Training in Texas.
This CV summarizes the qualifications and experience of Yogesh V.K. He has over 18 years of experience in highway engineering projects in India. He holds an M.E. in Highway Engineering and a B.E. in Civil Engineering. He has managed highway design, traffic studies, accident analysis, pavement design, and construction management projects. Currently he is the Assistant Vice President at ARKITECHNO Consultants, where he is responsible for business development and oversight of highway projects in Southern India.
Andinet Belete is an experienced Ethiopian professional with over 11 years of experience in financial management, auditing, and advisory roles. He currently works as a senior financial consultant for Grant Thornton Ethiopia, providing services including financial management, tax, and audit functions. Previously he has held roles as an audit manager, chief accountant, and senior auditor for various companies. He holds a BA in Accounting from Addis Ababa University and is pursuing the ACCA qualification.
Raphael Betit has over 5 years of experience in civil engineering roles including structural engineering, transportation design, foundation design, hydraulics, and airport runway design. He has a Bachelor's Degree in Civil Engineering and is proficient in AutoCAD, Word, PowerPoint, Excel, and other engineering software. His experience includes foundation design testing, hydraulic engineering, transportation design, structural analysis, and airport runway design using AutoCAD.
The document lists the technical skills, publications, presentations, workshops, and meetings of an individual. It includes proficiency with various computer software programs for design, scheduling, and statistical analysis. Ten technical publications and presentations from 2005 to 2011 are listed relating to pavement design, materials properties, and performance. Attendance at various workshops and meetings from 2004 to 2011 focusing on pavement and transportation engineering topics are also noted.
Blake Hardin is seeking a career in inspection, data tech, or as a party chief with over 10 years of experience in natural gas surveying. He has extensive experience using GPS, total stations, and other surveying equipment to conduct pipeline surveys and collect field notes. His work history includes roles as an instrument man and party chief at several surveying companies. He has a background in pipe and utility location, survey control, map reading, and coordinating survey data.
Sisay Debele Gudeta has over 20 years of experience as a geotechnical and material engineer in Ethiopia. He has extensive experience conducting geotechnical investigations for various infrastructure projects including roads, bridges, buildings, and dams. Some of his recent projects include serving as the senior geotechnical engineer for the Ali-Ethiopia-Deghamido 146Km Road Project and the Diredawa-Dewelle Road Design and Construction Project. He is proficient in conducting field investigations, laboratory testing, and geotechnical reporting.
The document discusses transportation sustainability and growing transportation options in Tulsa. It notes that transportation accounts for 70% of petroleum use in the US and 33% of greenhouse gas emissions. Nearly 30% of trips in metro areas are less than 1 mile. The document then summarizes Tulsa's regional transit system plan, which includes commuter, urban, and circulator services. It focuses on plans to improve the Peoria Avenue corridor, including the potential for bus rapid transit between downtown Tulsa and 71st Street. Projections estimate ridership on a Peoria BRT line could increase over 125% in 7 years to nearly 5,000 daily riders.
Mohammad Faysal is a Ph.D. candidate in Civil Engineering at the University of Texas at Arlington, with a focus on geotechnical and geo-environmental engineering. He has over 5 years of experience in geotechnical engineering projects, research, and analysis. His research at UT Arlington involves evaluating recycled materials for pavement bases and determining in-situ properties. He has published several papers on his research findings. Faysal holds a B.S. in Civil Engineering from Bangladesh University of Engineering & Technology and is a certified Engineer in Training in Texas.
This CV summarizes the qualifications and experience of Yogesh V.K. He has over 18 years of experience in highway engineering projects in India. He holds an M.E. in Highway Engineering and a B.E. in Civil Engineering. He has managed highway design, traffic studies, accident analysis, pavement design, and construction management projects. Currently he is the Assistant Vice President at ARKITECHNO Consultants, where he is responsible for business development and oversight of highway projects in Southern India.
Andinet Belete is an experienced Ethiopian professional with over 11 years of experience in financial management, auditing, and advisory roles. He currently works as a senior financial consultant for Grant Thornton Ethiopia, providing services including financial management, tax, and audit functions. Previously he has held roles as an audit manager, chief accountant, and senior auditor for various companies. He holds a BA in Accounting from Addis Ababa University and is pursuing the ACCA qualification.
Raphael Betit has over 5 years of experience in civil engineering roles including structural engineering, transportation design, foundation design, hydraulics, and airport runway design. He has a Bachelor's Degree in Civil Engineering and is proficient in AutoCAD, Word, PowerPoint, Excel, and other engineering software. His experience includes foundation design testing, hydraulic engineering, transportation design, structural analysis, and airport runway design using AutoCAD.
This document is a curriculum vitae for Kawooya Martin, a Health and Safety Officer. It outlines his personal details and qualifications, including degrees in economics and certificates in first aid, fire safety, and occupational health and safety. It details his professional experience as a safety officer for various construction projects in Uganda, Ethiopia, and Rwanda. It also lists his computer skills and safety-related training, and provides references.
R.D. Coppinger is an Irish civil engineer and international consultant specializing in project and construction management with over 25 years of experience working on infrastructure projects in Africa, Asia, and other developing areas. He has extensive experience managing projects in the health and education sectors for organizations like the World Bank and DFID. Currently based in Cape Town, he provides short term consultancy services on infrastructure projects in various countries.
This document is a curriculum vitae for Abathun Admassu. It summarizes his personal details, educational background, work experience, teaching experience, management consulting work, languages, and other skills. He has over 30 years of experience working in government, higher education, private companies, and as an independent management consultant in Ethiopia. He holds a BA in Management and Public Administration from Addis Ababa University and an MBA from the University of Birmingham in the UK.
Bahiru Tefera Bezabih is a civil engineer from Ethiopia with over 15 years of experience in construction project management, water and sanitation programs, and education. He is currently a construction supervisor for Plan International Ethiopia, overseeing school and refugee camp construction projects. Previously he held roles as a civil engineer, water and sanitation officer, study and design engineer, and schools director. He has extensive experience designing, implementing and supervising water, sanitation and hygiene programs, as well as infrastructure projects including roads, bridges, schools and water systems. He has strong computer, language and management skills and seeks to continue utilizing his expertise to improve community development.
Feleke Fanta Tassew is an experienced public health professional with over 18 years of experience in research, monitoring and evaluation, health information management systems, and quality improvement. He has worked for various organizations including the Ethiopian government, NGOs, and UN agencies. He has a Bachelor's in public health, a Master's in public health, and an MBA in health care services. Currently he is seeking a challenging position to utilize his skills and experience in improving healthcare and public health.
The CV summarizes Tilal Mohammed Osman Mohammed Ahmed's professional experience working as a Database Administrator and Software Engineer. He has 14 years of experience with Oracle databases, including installation, configuration, administration, performance tuning, and developing database applications. His most recent role was as a Database Administrator and System Analyst for Al-Morooj for Computer Solution in Riyadh, Saudi Arabia, where he performed database administration duties and analyzed requirements for an ERP system.
This curriculum vitae outlines the qualifications and experience of Mekuria Molla Ambele, a civil engineer from Ethiopia with over 9 years of experience in Germany and Ethiopia. It details his education including a MSc in Geotechnique and Infrastructure from Leibniz University Hannover and BSc in Civil Engineering from Addis Abeba University. It provides an extensive work history including roles with consulting firms and current employment as a Geotechnical Engineer with ZUBLIN. It also lists numerous technical skills and qualifications as well as sample projects involving excavation design, foundation design, and structural analysis software.
Anteneh Getachew Kebede has over 15 years of experience managing water resource engineering projects in Ethiopia. He has worked on projects such as dams, water treatment plants, pipelines, and hydropower stations. Currently, he owns three construction and trading companies and serves as a general manager and project engineer on water infrastructure projects. He holds degrees in water resource engineering and qualifications as a professional engineer in Ethiopia.
Happiest Minds is Hiring!
Drive Date: 6th Feb 16, Saturday
Drive location: Hyderabad and Bangalore
Work Location: Bangalore
Please mention in subject line in this format #Job Code #Experience #Current Location of the candidate without which resumes may not be considered for any further action.
For example : #Java #7yrs #Bangalore
Inbox Resumes ASAP.
Varsha K. is seeking a position that utilizes her theoretical skills and abilities in an industry offering professional growth. She has a B.Tech in Electronics and Communication Engineering from Sarabhai Institute of Science and Technology with 70.3% marks. Her technical skills include C and C++ basics. She has participated in symposiums conducted by IEEE, attended an ethical hacking workshop, and completed projects on border security and a smart e-tongue. Her hobbies include watching movies, cooking, and traveling.
This curriculum vitae summarizes the professional experience and qualifications of Erssido Lendebo Ugebo. He has nearly 20 years of experience in areas such as policy development, strategy guidance, training, and consulting on sexual and reproductive health, HIV/AIDS, and gender mainstreaming for various organizations. He holds a Doctorate in Medicine from Addis Ababa University and has extensive experience providing training, developing guidelines, and conducting research.
Michael Doxsey is a web developer, UI/UX designer, and art director based in Mill Valley, California. He has over 15 years of experience in graphic design, web development, and creative direction. His background includes positions at several companies where he led website redesigns, implemented content management systems, created marketing materials, and more. He is proficient in many programming languages, design tools, and content management systems.
Leslie Diaz is a Service Desk Manager with over 10 years of experience in customer service and IT support. She is proficient in ServiceDesk, MS Office, Microsoft Exchange, Lync, Windows Server 2003, and networked applications. As Service Desk Manager since 2012, she has raised service standards, empowered her team, and assisted with two acquisitions. Previously she was an IT Project Manager and Senior Analyst at Dell where she troubleshot issues and identified ways to improve the customer experience.
Sarena Ackley Wright has over 15 years of experience in talent acquisition and recruitment. She has held senior level positions at several large companies, leading recruitment teams and global talent strategy. She specializes in non-traditional recruitment practices and developing talent pipelines.
Mary Rosenberg has over 20 years of experience managing employee benefit programs. She has worked in HR roles at several companies, managing benefit programs for thousands of employees. Her experience includes implementing cost-saving initiatives, ensuring regulatory compliance, and leading projects to consolidate and improve benefit administration.
Hailay Nigus provides a CV that includes personal information, education history, work experience, skills, and language proficiency. He received a BSc degree in Electrical and Electronics Technology from Menschen Fur Menschen ATTC College in Harar, Ethiopia in 2014. His work experience includes serving as a Site Engineer. His skills include electrical installation, PLC programming, troubleshooting electronics, and proficiency in Microsoft Office, MATLAB, and computer simulation programs. He is fluent in English, Tigrigna, and Amharic.
Samson Kacha has over 14 years of experience in humanitarian relief, emergency response, and community development programs. He is currently the Country Program Manager for Integrated Community Development at Food for the Hungry International Ethiopia, where he oversees multiple projects and staff. Previously, he held roles as Area Project Manager and Project Manager at Food for the Hungry, and as a Regional Grant and Relief Program Officer at World Vision Ethiopia, where he managed community development, advocacy, and humanitarian assistance programs. He has expertise in program design, implementation, monitoring and evaluation, and has managed projects funded by USAID, CIDA, UNICEF, EU, and other organizations.
This curriculum vitae is for Yohannis Aschale Tefera from Ethiopia. He has over 10 years of experience in water resources engineering and project management roles. He received a Bachelor of Science degree in Water Resources and Irrigation Engineering from Arbaminch University. His most recent role was as a Sanitary Engineer with Amhara Design and Supervision Enterprise, where he prepared designs, bills of quantities, and supervised constructions. He is proficient in English and Amharic, and has strong communication, leadership, and computer skills.
Samson Chombe is applying for the position of Civil Engineer at Rankin Engineering Consultants. He has over 14 years of experience in civil engineering and materials testing. He holds a Bachelor's Degree in civil engineering from Atlantic International University in Hawaii. His professional experience includes conducting various materials tests on soils, aggregates, asphalt, concrete and bitumen. He is proficient in establishing quality control programs and developing mix designs. He is currently working on the Chingola Solwezi Rehabilitation Road Project in Zambia.
Anoop R is seeking a career as a civil engineer. He has a Master's and Bachelor's degree in Civil Engineering from Anna University. He has 1 year of experience as a site engineer. His skills include project implementation, learning new technologies, innovation, strong communication, and ability to work individually and in a group. He is motivated to learn and produce results under pressure. His hobbies include watching documentaries and designing.
This document provides a guide for designing dowel load transfer systems in jointed concrete pavements. It discusses factors to consider like dowel diameter, length, alignment requirements, spacing, coatings, and alternative materials. It reviews the history of dowel design and provides recommendations based on research. These include using epoxy-coated steel dowels 1/8 the slab thickness in length, with a standard basket design and bond-breakers to ease construction and lower costs while ensuring dowel effectiveness.
Jorge Beltran has over 3 years of experience in pavement engineering evaluation and testing in both field and laboratory settings. He has a Master of Science in Civil Engineering expected in July 2016 from UTEP, where he is currently a graduate research assistant. His research focuses on intelligent compaction implementation for TxDOT and FHWA projects. He is proficient in GIS, pavement design software, and data analysis skills.
This document is a curriculum vitae for Kawooya Martin, a Health and Safety Officer. It outlines his personal details and qualifications, including degrees in economics and certificates in first aid, fire safety, and occupational health and safety. It details his professional experience as a safety officer for various construction projects in Uganda, Ethiopia, and Rwanda. It also lists his computer skills and safety-related training, and provides references.
R.D. Coppinger is an Irish civil engineer and international consultant specializing in project and construction management with over 25 years of experience working on infrastructure projects in Africa, Asia, and other developing areas. He has extensive experience managing projects in the health and education sectors for organizations like the World Bank and DFID. Currently based in Cape Town, he provides short term consultancy services on infrastructure projects in various countries.
This document is a curriculum vitae for Abathun Admassu. It summarizes his personal details, educational background, work experience, teaching experience, management consulting work, languages, and other skills. He has over 30 years of experience working in government, higher education, private companies, and as an independent management consultant in Ethiopia. He holds a BA in Management and Public Administration from Addis Ababa University and an MBA from the University of Birmingham in the UK.
Bahiru Tefera Bezabih is a civil engineer from Ethiopia with over 15 years of experience in construction project management, water and sanitation programs, and education. He is currently a construction supervisor for Plan International Ethiopia, overseeing school and refugee camp construction projects. Previously he held roles as a civil engineer, water and sanitation officer, study and design engineer, and schools director. He has extensive experience designing, implementing and supervising water, sanitation and hygiene programs, as well as infrastructure projects including roads, bridges, schools and water systems. He has strong computer, language and management skills and seeks to continue utilizing his expertise to improve community development.
Feleke Fanta Tassew is an experienced public health professional with over 18 years of experience in research, monitoring and evaluation, health information management systems, and quality improvement. He has worked for various organizations including the Ethiopian government, NGOs, and UN agencies. He has a Bachelor's in public health, a Master's in public health, and an MBA in health care services. Currently he is seeking a challenging position to utilize his skills and experience in improving healthcare and public health.
The CV summarizes Tilal Mohammed Osman Mohammed Ahmed's professional experience working as a Database Administrator and Software Engineer. He has 14 years of experience with Oracle databases, including installation, configuration, administration, performance tuning, and developing database applications. His most recent role was as a Database Administrator and System Analyst for Al-Morooj for Computer Solution in Riyadh, Saudi Arabia, where he performed database administration duties and analyzed requirements for an ERP system.
This curriculum vitae outlines the qualifications and experience of Mekuria Molla Ambele, a civil engineer from Ethiopia with over 9 years of experience in Germany and Ethiopia. It details his education including a MSc in Geotechnique and Infrastructure from Leibniz University Hannover and BSc in Civil Engineering from Addis Abeba University. It provides an extensive work history including roles with consulting firms and current employment as a Geotechnical Engineer with ZUBLIN. It also lists numerous technical skills and qualifications as well as sample projects involving excavation design, foundation design, and structural analysis software.
Anteneh Getachew Kebede has over 15 years of experience managing water resource engineering projects in Ethiopia. He has worked on projects such as dams, water treatment plants, pipelines, and hydropower stations. Currently, he owns three construction and trading companies and serves as a general manager and project engineer on water infrastructure projects. He holds degrees in water resource engineering and qualifications as a professional engineer in Ethiopia.
Happiest Minds is Hiring!
Drive Date: 6th Feb 16, Saturday
Drive location: Hyderabad and Bangalore
Work Location: Bangalore
Please mention in subject line in this format #Job Code #Experience #Current Location of the candidate without which resumes may not be considered for any further action.
For example : #Java #7yrs #Bangalore
Inbox Resumes ASAP.
Varsha K. is seeking a position that utilizes her theoretical skills and abilities in an industry offering professional growth. She has a B.Tech in Electronics and Communication Engineering from Sarabhai Institute of Science and Technology with 70.3% marks. Her technical skills include C and C++ basics. She has participated in symposiums conducted by IEEE, attended an ethical hacking workshop, and completed projects on border security and a smart e-tongue. Her hobbies include watching movies, cooking, and traveling.
This curriculum vitae summarizes the professional experience and qualifications of Erssido Lendebo Ugebo. He has nearly 20 years of experience in areas such as policy development, strategy guidance, training, and consulting on sexual and reproductive health, HIV/AIDS, and gender mainstreaming for various organizations. He holds a Doctorate in Medicine from Addis Ababa University and has extensive experience providing training, developing guidelines, and conducting research.
Michael Doxsey is a web developer, UI/UX designer, and art director based in Mill Valley, California. He has over 15 years of experience in graphic design, web development, and creative direction. His background includes positions at several companies where he led website redesigns, implemented content management systems, created marketing materials, and more. He is proficient in many programming languages, design tools, and content management systems.
Leslie Diaz is a Service Desk Manager with over 10 years of experience in customer service and IT support. She is proficient in ServiceDesk, MS Office, Microsoft Exchange, Lync, Windows Server 2003, and networked applications. As Service Desk Manager since 2012, she has raised service standards, empowered her team, and assisted with two acquisitions. Previously she was an IT Project Manager and Senior Analyst at Dell where she troubleshot issues and identified ways to improve the customer experience.
Sarena Ackley Wright has over 15 years of experience in talent acquisition and recruitment. She has held senior level positions at several large companies, leading recruitment teams and global talent strategy. She specializes in non-traditional recruitment practices and developing talent pipelines.
Mary Rosenberg has over 20 years of experience managing employee benefit programs. She has worked in HR roles at several companies, managing benefit programs for thousands of employees. Her experience includes implementing cost-saving initiatives, ensuring regulatory compliance, and leading projects to consolidate and improve benefit administration.
Hailay Nigus provides a CV that includes personal information, education history, work experience, skills, and language proficiency. He received a BSc degree in Electrical and Electronics Technology from Menschen Fur Menschen ATTC College in Harar, Ethiopia in 2014. His work experience includes serving as a Site Engineer. His skills include electrical installation, PLC programming, troubleshooting electronics, and proficiency in Microsoft Office, MATLAB, and computer simulation programs. He is fluent in English, Tigrigna, and Amharic.
Samson Kacha has over 14 years of experience in humanitarian relief, emergency response, and community development programs. He is currently the Country Program Manager for Integrated Community Development at Food for the Hungry International Ethiopia, where he oversees multiple projects and staff. Previously, he held roles as Area Project Manager and Project Manager at Food for the Hungry, and as a Regional Grant and Relief Program Officer at World Vision Ethiopia, where he managed community development, advocacy, and humanitarian assistance programs. He has expertise in program design, implementation, monitoring and evaluation, and has managed projects funded by USAID, CIDA, UNICEF, EU, and other organizations.
This curriculum vitae is for Yohannis Aschale Tefera from Ethiopia. He has over 10 years of experience in water resources engineering and project management roles. He received a Bachelor of Science degree in Water Resources and Irrigation Engineering from Arbaminch University. His most recent role was as a Sanitary Engineer with Amhara Design and Supervision Enterprise, where he prepared designs, bills of quantities, and supervised constructions. He is proficient in English and Amharic, and has strong communication, leadership, and computer skills.
Samson Chombe is applying for the position of Civil Engineer at Rankin Engineering Consultants. He has over 14 years of experience in civil engineering and materials testing. He holds a Bachelor's Degree in civil engineering from Atlantic International University in Hawaii. His professional experience includes conducting various materials tests on soils, aggregates, asphalt, concrete and bitumen. He is proficient in establishing quality control programs and developing mix designs. He is currently working on the Chingola Solwezi Rehabilitation Road Project in Zambia.
Anoop R is seeking a career as a civil engineer. He has a Master's and Bachelor's degree in Civil Engineering from Anna University. He has 1 year of experience as a site engineer. His skills include project implementation, learning new technologies, innovation, strong communication, and ability to work individually and in a group. He is motivated to learn and produce results under pressure. His hobbies include watching documentaries and designing.
This document provides a guide for designing dowel load transfer systems in jointed concrete pavements. It discusses factors to consider like dowel diameter, length, alignment requirements, spacing, coatings, and alternative materials. It reviews the history of dowel design and provides recommendations based on research. These include using epoxy-coated steel dowels 1/8 the slab thickness in length, with a standard basket design and bond-breakers to ease construction and lower costs while ensuring dowel effectiveness.
Jorge Beltran has over 3 years of experience in pavement engineering evaluation and testing in both field and laboratory settings. He has a Master of Science in Civil Engineering expected in July 2016 from UTEP, where he is currently a graduate research assistant. His research focuses on intelligent compaction implementation for TxDOT and FHWA projects. He is proficient in GIS, pavement design software, and data analysis skills.
Jennifer L. Damery has over 18 years of experience as a geotechnical engineer. She has a M.S. in Geological Engineering and has worked for several engineering firms performing geotechnical evaluations and managing projects. Her experience includes preparing reports, performing calculations and analyses, designing foundations and pavements, evaluating soil conditions, and managing geotechnical aspects of construction.
Donald Dwyer has over 35 years of experience as a geotechnical engineer, most recently working as an engineering consultant and part-time instructor. He had a long career with the New York State Department of Transportation, serving as Section Head for the Highway Design and Construction Section. In this role, he managed staff and oversaw development of design manuals. He has extensive experience evaluating the use of recycled materials in transportation projects. Dwyer holds a civil engineering degree and has authored several technical reports and publications on geotechnical topics.
This document analyzes historical pipeline construction cost data from 412 pipelines built between 1992 and 2008 in the United States and Canada. It summarizes the distribution of pipelines by year completed, diameter, length, capacity, and location. The majority of pipelines were shorter than 10 miles, between 30-48 inches in diameter, and located in the Northeast region of the US. Material and labor costs made up about 71% of total costs on average. Costs were adjusted to 2008 dollars using the Chemical Engineering Plant Cost Index to account for inflation.
1) Ali Zabihollah zadeh is an Iranian civil engineer with over 15 years of experience in dam construction projects.
2) He holds an MSc in Hydraulic Structures and a BSc in Irrigation Engineering. His areas of research include hydraulics, soil mechanics, and concrete studies.
3) He has worked as a supervisor on dam construction projects, an expert in a dam's concrete technical office, and as a consultant engineer on irrigation projects.
This research report summarizes acoustic emission (AE) testing conducted on four prestressed concrete bridge girders on I-565 in Huntsville, Alabama. The testing was performed to evaluate AE evaluation criteria for assessing the structural integrity of in-service prestressed concrete bridges. Both pre- and post-fiber reinforced polymer (FRP) repair tests were conducted. The evaluation methods used were the NDIS-2421 criterion, signal strength moment ratio analysis, and AE 2D location analysis. It was concluded that while the testing procedure provided results efficiently, the evaluation criteria needed adjustment for testing prestressed concrete bridge girders in service.
Helena Byard is a civil engineer with over 9 years of experience in urban infrastructure design and construction project management. She has independently designed and managed projects totaling over $12 million and contributed to projects totaling $70 million. Byard has a background in environmental engineering and experience with transportation, drainage, and pedestrian facility design. She is proficient in AutoCAD and civil engineering software and holds a BS in Civil Engineering from the University of Alaska Fairbanks.
Satwinder Bassanpal graduated from San Jose University with a B.S. in Civil Engineering and a 3.425 GPA. He has relevant coursework and work experience in areas such as fluid mechanics, structural analysis, estimating, scheduling, and document control. He has interned with construction companies such as Nibbi Brothers and MCM Construction where he assisted with tasks like generating schedules, establishing document databases, and ensuring worksite safety. Additionally, he has participated in various leadership, competition, and extracurricular activities through organizations like ASCE, SOLES, and SWE to further develop his engineering skills.
This document is a resume for Bharadwaj Bommanayakanahalli summarizing his education, skills, experience, projects and publications. He received a Master's degree in Transportation Engineering from Texas A&M University and a Bachelor's degree in Civil Engineering from NIT Warangal, India. His experience includes graduate research assistant roles at Texas A&M Transportation Institute focusing on signs, markings and roadway safety. He has extensive coursework and skills in traffic and transportation engineering and software. His projects involve safety and operational analysis, design and cost estimation. He has authored publications in the Transportation Research Record.
This document is a curriculum vitae for Ali Zabihollah zadeh. It provides his personal and contact information, educational background including a M.Sc. in Hydraulic Structures and B.Sc. in Irrigation, research interests in areas like hydraulics and concrete studies, work experience supervising dam construction projects and as an expert and consultant, teaching experience, and publications.
Benjamen Korobkin is a senior at The Ohio State University studying Aerospace Engineering with a 3.443 GPA. He has interned at Lockheed Martin where he coded in MATLAB to develop a telemetry data program for military satellites. Some of his engineering projects include designing an energy efficient vehicle for a competition and leading experimental testing for an airfoil analysis project. He also has leadership experience through various honors societies and as a service chairman for his fraternity.
Taylor Harper is a civil engineer with over 15 years of experience in design and project management. She has a PE license in Washington State and experience designing transportation infrastructure like roads, sidewalks, and storm drainage systems. She is proficient in AutoCAD Civil 3D and has worked on ADA accessibility upgrades and transportation projects for various municipalities. Her background also includes construction inspection, research on hydroelectric energy potential, and supervising concrete forming activities on military housing projects.
This document is a resume for Bharadwaj Bommanayakanahalli summarizing his education, skills, experience, projects and publications. He received a Master's degree in Transportation Engineering from Texas A&M University and a Bachelor's degree in Civil Engineering from NIT Warangal, India. His experience includes graduate research assistant roles at Texas A&M Transportation Institute evaluating traffic operations and safety. He has extensive coursework and skills in traffic and transportation engineering.
Dominick D'Angelo is an engineer technician with one year of experience in the engineering field. He graduated from Penn State University with a Bachelor's degree in Civil Engineering. His responsibilities in his current role include completing permit applications for mining and civil projects. He has prior internship experience with an engineering firm and the Pennsylvania Department of Transportation where he conducted field work and managed databases.
Moe Shamsai has over 20 years of experience in structural engineering. He received his Ph.D. from Ohio State University and has worked as a senior structural engineer on industrial projects. He is a licensed professional engineer in several states and a member of prominent engineering organizations such as ASCE and ACI. Shamsai has authored several journal publications and conference papers on reinforced concrete design and prefabricated reinforcement systems.
Moe Shamsai has over 20 years of experience in structural engineering. He received his Ph.D. from Ohio State University and has worked as a senior structural engineer on industrial projects. He is a licensed professional engineer in several states and a member of prominent engineering organizations such as ASCE and ACI. Shamsai has authored several publications in peer-reviewed journals and conference proceedings related to reinforced concrete design and prefabricated reinforcement systems.
Ganga R. Subedi is seeking a position in civil engineering with an emphasis on quality assurance management. She has over 2 years of experience as a quality control engineer on the Alaskan Way Viaduct Project in Seattle. She is proficient in various engineering software and has strong communication, problem solving, and analytical skills. She has a BS in civil engineering from the University of Washington.
Danielle Neumeister has a B.S. in Civil Engineering from the University of Maryland and a B.A. in Mathematics from Notre Dame of Maryland University. She has internship experience in design engineering and project engineering. Her technical skills include Microstation, ArcMap, Autodesk Inventor, Mathematica, and Microsoft Office applications. She has been involved with the American Society of Civil Engineers concrete canoe team and held leadership roles in student organizations. Neumeister has received several scholarships and academic awards recognizing her achievements.
Cody Cantu is a civil engineering student at Western Michigan University seeking an engineering position. He has a bachelor's degree in civil engineering expected in May 2016 with a minor in mathematics. He has relevant coursework in areas like construction, structures, transportation, and materials. For work experience, he has interned as a construction inspector and engineering technician and done internships related to military vehicle design. He also has certifications in concrete and nuclear density testing. He is involved with the concrete canoe team and ASCE student chapter at WMU.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
1. Brian Coree
Consultant | Pavement Engineer | Pavement Materials Engineer
14345 220th
St, Radcliffe, IA 50230, USA
(515)-708-8005 | brianj.coree@gmail.com |
Profile
A highly knowledgeable and intelligent Consultant, Pavement Engineer and Pavement Materials Engineer with
extensive experience in quality control, research, testing procedures and report checking within pavement
technologies.
Displays a commitment to the management and delivery of multiple / complex projects within set
timeframes and to a high quality standard
Utilises exceptional communicative abilities to formulate and foster beneficial working relationships at all
levels
Works well autonomously, with a high level of self responsibility, plays an instrumental role within a
successful and productive team is a strong leader
Seeking a challenging and rewarding new role as Pavement Engineer / Pavement Materials Engineer, where skills
knowledge and expertise gained throughout successful career to date can be applied and further development
achieved on a professional platform.
Career Detail
Al-Tasneem Enterprises - Consultant Oct - Nov 2015
Responsible for the delivery of high quality consultancy advice and technician training on site. Incorporated
Superpave design and testing in the design of HMA and SMA mixtures for Seeb International Airport Development
(MC3).
Kansas Department of Transportation - Asphalt Research Engineer Oct 2011 - Feb 2014
Asphalt Research Engineer contributing to the delivery of QC / QA on KDOT projects and the research on asphalt
materials. Dealt with WMA evaluation and that of pavement condition. Facilitated the certification of field and
laboratory technicians through effective training prior to examination.
Des Moines Area Community College - Temporary Adjunct Instructor 2007 - Spring Semester
Des Moines - Staff Engineer Jun 2005 - Oct 2011
Staff Engineer responsible for CMT - Construction Materials Testing - testing procedures and report checking.
Expert witness in three court cases. Designed HMA mixtures for Iowa NSCAR Speedway.
Iowa State University - Assistant Professor Aug 1996 - May 2005
R.S. McDaniel (North Central Superpave Center - Adjunct Instructor Aug 1996 - May 2005
Assistant Professor in the Department of Civil, Construction and Environmental Engineering. Provided graduate
and undergraduate instruction research.
CTRE / DOT - Transportation Materials Engineer Aug 1996 - May 2005
Advisor to Iowa DOT Bituminous Engineer with responsibility for advising and instructing IADOT Superpave
Technician Certification.
VirginiaTech - Visiting Assistant Professor Aug 1995 - Aug 1996
Delivered lectures in the Department of Civil Engineering.
Indiana Department of Transportation (Accelerated Pavement Testing Facility)
Manager Jun 1994 - Aug 1995
Materials Research Engineer May 1993 - Jun 1994
Pavement Research Engineer Dec 1991 - May 1993
ERES International Inc - Resident Project Engineer May 1989 - Nov 1991
Vulcan Materials Inc - Laboratory Manager (Corporate) / Research Engineer Nov 1988 - May 1989
Purdue University - PhD Candidate Aug 1984 - Nov 1988
Name - job title / job title / job title
2. Conseco International Consultants - Senior Materials Engineer Apr 1982 - Jun 1984
Halcrow International Partnership - Project Design Engineer Jan 1981 - Apr 1982
Aeroport de Paris - Resident Engineer Dec 1979 - Dec 1980
Halcrow International Partnership - Materials Engineer Mar - Dec 1979
Halcros Middle East Ltd - Assistant Resident Engineer Nov 1974 - Jun 1976
Watson Saudi Arabia - Assistant Engineer Nov 1972 - Nov 1974
J.D & D.M Watson - Graduate Engineer Aug 1970 - Nov 1972
Publications
Ceylan, H., Coree, B., Gopalakrishnan, K., “Evaluation of the Mechanistic-Empirical Pavement Design Guide for
Implementation in Iowa”, The Baltic Journal of Road and Bridge Engineering, Vilnius, Lithuania: Technika, 2009,
Vol IV, No.1., pp. 5-12
Ceylan, H., Coree, B., Gopalakrishnan, K., “Design of Rigid Pavements in Iowa Using the Mechanistic-Empirical
Pavement Design Guide”, The Baltic Journal of Road and Bridge Engineering, Vilnius, Lithuania: Technika, 2008,
Vol III, No.4., pp. 219-225
Ceylan, H., Gopalakrishnan, K., Coree, B.J., Kota, T., Mathews, R., “Development of Mechanistic-Empirical
Structural Design Program for Hot-Mix Asphalt Overlaid Rubblized Portland Cement Concrete Pavements”,
Transportation Research Board, Annual Meeting, Washington, D.C., January 2007
Kim, S., Coree, B.J., “Hot Mix Asphalt Moisture Sensitivity Testing Revisited”, Association of Asphalt Paving
Technologists, Savannah, GA., March 2006.
Coree, B., Ceylan, H., Harrington, D., “Implementing the Mechanistic-Empirical Pavement Design Guide: Technical
Report”, IHRB Project TR-509, CTRE, Ames, Iowa. May 2005.
Suleiman, M.T., Coree, B.J., “A Constitutive Model for HDPE Material”, ASCE Journal of Materials in Civil
Engineering, Vol. 16, No. 6, 2004.
Heitzman, M., Coree, B., “A Case Study of Three Full-depth HMA Interstate Pavements”, First International
Symposium on Design and Construction of Long Lasting Asphalt Pavements, Auburn, AL (June 2004)
Oh, Il-Seok, Coree, B.J., “A Rapid Performance Test for SUPERPAVE Mixtures”, First International Symposium on
Design and Construction of Long Lasting Asphalt Pavements, Auburn, AL (June 2004)
Oh, Il-Seok, Coree, B.J., “A Really Simple Performance Test”, Association of Asphalt Paving Technologists,
Lexington, KY., March 2004.
Coree, B.J., Heitzman, M., Hinrichsen, J., Redmond, D., Seward, D., Siefken, T., “Analysis Software to Verify Mix
Designs”, Mid-Continent Transportation Symposium, Ames, Iowa. August 2003
McDaniel, R.S., Coree, B.J., “Identification of Laboratory techniques to Optimize Superpave HMA Surface Friction
Characteristics”, SQDH 2003-6, Phase I Final Report, June 2003
Lohnes, R.A., Coree, B.J., “Determination and Evaluation of Alternate Methods for Managing and Controlling
Highway-Related Dust”, Iowa Highway Research Board, Iowa DOT TR-449, June 2002
Coree, B.J., Oh, Il-Seok*, “Statistical Analysis of construction tolerances in asphalt pavements”, Iowa Department
of Transportation, 2001
Coree, B.J., Hislop, W.P.*, “A Laboratory Investigation into the Effects of Aggregate-Related Factors in Critical
VMA in Asphalt Paving Mixtures”, Journal of the Association of Asphalt Paving Technologists, Volume 70, pp. 70-
131, 2001
Coree, B.J., Hislop, W.P., “A Laboratory Investigation into the Effects of Aggregate-related Factors on Critical VMA
in Asphalt Paving Mixtures”, Iowa Highway Research Board, Iowa DOT TR-415, June 2000
Hislop, W.P., Coree, B.J., “VMA as a Design Parameter in Hot-Mix Asphalt”, Mid-Continent Transportation
Symposium, Ames, Iowa. January 2000
Coree, B.J. “HMA Volumetrics Revisited – A New Paradigm”, Transportation Research Board, Transportation
Record No. 1681. 1999, Washington, D.C.
Coree, B.J., Hislop, W.P.*, “The Difficult Nature of Minimum VMA: A Historical Perspective”, Transportation
Research Board, Transportation Record No. 1681, 1999, Washington, D.C.
Galal, A.G., Coree, B.J., Haddock, J.E., White, T.D. “Structural Adequacy of Rubblized PCC Pavement”,
(Transportation Research Board, Transportation Record No. 1684. 1999, Washington, D.C.
Al-Qadi, I., Coree, B., Brandon, T.L., Bhutta, S.A*., Appea, A.K*., “Quantifying the Separation Characteristics of
Geosynthetics in Flexible Pavements”, 6th International Conference on Geosynthetics, pp 945-950. Atlanta, 1998
Haddock, J.E., White, T.D., Coree, B.J., “Validation of SHRP Asphalt Mixture Specifications Using Accelerated
Testing”, Center for Aggregate Research, Texas A&M, College Station, TX, April 1998
Appea, A.K., Al-Qadi, I.L., Bhutta, S.A., Coree, B.J., “Quantitative Assessment of Transition Layer in Flexible
Pavements”, Transportation Research Board, 1998, Washington, D.C.
Name - job title / job title / job title
3. Button, J.W., Fernando, E.G., Crockford, W.W., Coree, B.J. “Design and Evaluation of Large-Stone Asphalt
Mixtures”, Eighth International Conference on Asphalt Pavement. Seattle, Washington, August 1997
Button, J.W., Crockford, W.W., Fernando, E.G., Von Quintus, H.L., Scherocman, J.A., Harvey, J.T., Coree, B.,
“Design and Evaluation of Large Stone Asphalt Mixtures”, NCHRP 386, National Cooperative Highway Research
Program, 1997.
Coree, B.J., Button, J.W., “Full-Scale Rutting Tests of Large-Stone Asphalt Mixtures”, Transportation Research
Board), Transportation Record No. 1590, 1997, Washington, D.C.
Park, T., Lee, K., Salgado, R., Lovell, C.W., Coree, B.J. “Use of Pyrolyzed Carbon Black as Additive in Hot Mix
Asphalt”, Journal of Transportation Engineering, American Society of Civil Engineers, Vol. 123. No. 6, 1997
Park, T., Coree, B.J., Lovell, C.W., “Evaluation of Pyrolized Carbon Black from Scrap Tires as an Additive in Hot Mix
Asphalt”, Transportation Research Board, Transportation Record No. 1530. 1996, Washington, D.C.
Park, T.S., Coree, B.J., Lovell, C.W., “Application of Pyrolized Carbon Black from Scrap Tires in Asphalt Pavement
Design and Construction”, Mid-Atlantic Industrial Waste Conference. Vol. 27, 1995
Zaghloul, S.M., Coree, B.J., McDaniel, R.S., “Practical Method for Ensuring the Success of Crack and Seat
Operations Using the Falling Weight Deflectometer”, Transportation Research Board, Transportation Record No.
1513. Washington, D.C., 1995
Zaghloul, S., White, T., Drnevich, V., Coree, B., “Dynamic Analysis of FWD Loading and Pavement Response Using a
Three-Dimensional Dynamic Finite-Element Program”, ASTM STP 1198, Dec. 1994
White, T.D. and B.J. Coree (1990), “Threshold Pavement Thickness to Survive Spring Thaw”, 3rd International
Conference on the Bearing Capacity of Roads and Airfields, Trondheim, Norway.
Coree, B.J., White, T.D., “AASHTO Flexible Pavement Design: Fact or Fiction?” Transportation Research Board,
Transportation Record 12866. Washington, D.C., January 1990
Coree, B.J., White, T.D., “Layer Coefficients in Terms of Performance and Mixture Characteristics, Final Report”,
Indiana Joint Highway Research Project, FHWA/IN/JHRP/88-13, Sept 1988
Coree, B.J., VanDerHorst, K.S.*, “Superpave Compaction”, Crossroads 2000, Ames, Iowa, July 1998
Coree, B.J., White, T.D., “The Synthesis of Mixture Strength Parameters Applied to the Determination of AASHO
Layer Coefficient Distributions”, Journal, Association of Asphalt Paving Technologists, Vol 58. March 1988
Hayward, R.K., Caesar, J.A., Coree, B.J., “Rational Pavement Design: The Development of New Practices from
Experiences in Mainly Hot Arid Regions”, IVth International Road Federation African Highway Conference.,
Nairobi, Kenya, January 1980
Presentations
Coree, B.J., “The Use of RAP in Kansas”, University of Kansas 56th Annual Asphalt Conference, Lawrence, KS, 6th
December, 2012
Coree, B.J., “The APAI Flexible Pavement Thickness Program”, Des Moines, IA., 5th March 2010
Coree, B.J., “The APAI Flexible Pavement Thickness Program”, Ames, IA., 26th April 2007
Coree, B.J., “The APAI Flexible Pavement Thickness Program”, Cedar Rapids, IA., 24th April 2007
Coree, B.J., “The APAI Flexible Pavement Thickness Program”, Greater Iowa Asphalt Conference, Des Moines,
Iowa. March 1st, 2007
Coree, B.J., Ceylan, H., “Mechanistic-Empirical Pavement Design Guide Implementation”, Draft Final Report, Iowa
DOT, March 23, 2005
Coree, B.J., “Iowa’s First Perpetual Pavement Design”, Greater Iowa Asphalt Conference, Des Moines, Iowa,
March 5, 2005
Coree, B.J., “High ESAL Mix Designs”, Greater Iowa Asphalt Conference, March 5, 2005
Coree, B.J., “Iowa’s Approach to AASHTO 2002 Implementation, 5th FHWA Midwestern Pavement Design
Workshop, Ames, Iowa. February 10-12, 2004
Coree, B.J., Ceylan, H., “A Strategic Plan for Implementation of AASHTO 2002 Pavement Design Guide”, Proposal
to Iowa Highway Research Board, 2003. Ames, Iowa, October 31, 2003
Coree, B.J., “SuperPave Implementation for Iowa Local Jurisdictions”, MINK Conference, St. Joseph, MO. October
2003
Coree, B.J., Ceylan, H., “A Strategic Plan for Implementation of AASHTO 2002 Pavement Design Guide – Interim
Report”, to meeting of senior staff of Minnesota DOT, Wisconsin DOT and Iowa DOT, LaCrosse, WI., Oct. 2003
Coree, B.J., Ceylan, H., “A Strategic Plan for Implementation of AASHTO 2002 Pavement Design Guide – Interim
Report”, to senior Iowa DOT Management. 13th August, 2003. Ames, Iowa.
Coree, B.J., “Mechanistic Design of Pavement”, Asphalt Pavement Association of Iowa/Iowa Department of
Transportation Senior Technicians Group, March 5th, 2003. Des Moines, Iowa
Name - job title / job title / job title
4. Coree, B.J., “A Simple Performance Test for HMA”, Asphalt Pavement Association of Iowa/Iowa Department of
Transportation Senior Technicians Group, March 5th, 2003. Des Moines, Iowa
Coree, B.J., “Mechanistic Design of Pavement”, 48th Annual Asphalt Paving Conference, Asphalt Pavement
Association of Iowa/Iowa Department of Transportation/Iowa State University, February 28th, 2003. Ames, Iowa
Coree, B.J., Hislop, W.P.*, “A Laboratory Investigation into the Effects of Aggregate-Related Factors in Critical
VMA in Asphalt Paving Mixtures”, Annual Meeting, Association of Asphalt Paving Technologists, Clearwater, FL.,
March 2001
Coree, B.J., “HMA Volumetrics Revisited – A New Paradigm”3, 78th Annual Meeting, Transportation Research
Board, January 1999, Washington, D.C
Coree, B.J., Hislop, W.P.*, “The Difficult Nature of Minimum VMA: A Historical Perspective” , 78th Annual
Meeting, Transportation Research Board, January 1999, Washington, D.C
Coree, B.J., Button, J.W., “Full-Scale Rutting Tests of Large-Stone Asphalt Mixtures”, 76th Annual Meeting,
Transportation Research Board, January 1997, Washington, D.C
Coree, B.J., White, T.D., “AASHTO Flexible Pavement Design: Fact or Fiction?” 67th Annual Meeting,
Transportation Research Board, Washington, D.C., January 1988
Coree, B.J., White, T.D., “The Synthesis of Mixture Strength Parameters Applied to the Determination of AASHO
Layer Coefficient Distributions”, Annual Meeting, Association of Asphalt Paving Technologists, Nashville, TN.
March 1988
Park, T., Coree, B.J., Lovell, C.W., “Evaluation of Pyrolized Carbon Black from Scrap Tires as an Additive in Hot Mix
Asphalt”, 75th Annual Meeting, Transportation Research Board), January 1996, Washington, D.C
Professional Activities - Consulting; Henderson & Sturm PLC, Expert witness in Federal patent case; IIW
Consultants, Dubuquel; Halcrow International Partnership, London, UK; WK (Pavement Engineering), Nottingham,
UK; Pavement Design Software Developer, Asphalt Pavement Association of Iowa.
Referee Services - American Society of Civil Engineers (5 papers); American Society of Testing and Materials (1
paper); National Academy of Sciences (Transportation Research Board Division) (36 papers); Association of
Asphalt Paving Technologists (19 papers); International Society for Asphalt Pavement, Ninth International
Conference on Asphalt Pavements, Copenhagen, Denmark. 2001 (10 papers); University Transportation Center
for Alabama (17 reviews); International Journal of Pavement Engineering (1 paper)
Service - Chair, Iowa DOT Ad-hoc Committee on Strategic Planning for Implementation of the AASHTO 2002
Pavement Design Guide. April 2003 - May 2005; Member, Technical Advisory Group, Ninth International
Conference on Asphalt Pavements, International Society for Asphalt Pavement, 2002, Copenhagen, Denmark,
August 2002; Member, Technical Advisory Committee (the “A” Team), Asphalt Paving Association of Iowa, 2000 -
present; Member (friend), Transportation Research Board, Committee A2B03, Flexible Pavement Design; Member
(friend), (Transportation Research Board, Committee A2B05, Strength and Deformation Characteristics of
Pavement Sections; Member (friend), Transportation Research Board, Committee A2D03, Characteristics of
Bituminous-Aggregate Combinations to meet Surface Requirements; Interim State Bituminous Engineer, Iowa
Department of Transportation, May 1999 - October 1999
Education and Qualifications - B.Sc. (Hons) Civil Engineering; M.S.C.E. Transportation Engineering; Ph.D., Civil
Engineering
References are available upon request
Name - job title / job title / job title