Ce document est un encyclopédie pour les amoureux de calcul des structures en béton armé. Car vous y découvrirez toutes les notions et astuces des éléments en béton armé
Ce document est un encyclopédie pour les amoureux de calcul des structures en béton armé. Car vous y découvrirez toutes les notions et astuces des éléments en béton armé
L’importance des ouvrages de soutènement est capitale car leurs dysfonctionnement peut engendrer des
dégâts matériels et mettre en péril votre sécurité, cependant il est nécessaire de surveiller ces
ouvrages et déceler toute anomalie afin proposer des solutions de réparation ou d’entretien
avant la rupture (partielle ou totale)
This document provides an overview of bubble deck slabs, which are hollow core slabs invented in Denmark that virtually eliminate concrete from the middle of floor slabs, dramatically reducing weight. It discusses the types of bubble deck slabs, materials used, advantages like reduced weight and costs, and properties including equivalent bending strength, increased spans, reduced deflection, durability, fire resistance, and vibration performance compared to solid slabs. Projects using bubble deck slabs are also highlighted.
A concrete slab is a common structural element of modern buildings. Horizontal slabs of steel reinforced concrete, typically between 4 and 20 inches (100 and 500 millimeters) thick, are most often used to construct floors and ceilings, while thinner slabs are also used for exterior paving. Sometimes these thinner slabs, ranging from 2 inches (51 mm) to 6 inches (150 mm) thick, are called mud slabs, particularly when used under the main floor slabs[1] or in crawl spaces.[2]
In many domestic and industrial buildings a thick concrete slab, supported on foundations or directly on the subsoil, is used to construct the ground floor of a building. These can either be "ground-bearing" or "suspended" slabs. The slab is "ground-bearing" if it rests directly on the foundation, otherwise the slab is "suspended".[3] For double-storey or multi-storey buildings, the use of a few common types of concrete suspended slabs are used (for more types refer to the Concrete Slab#Design section below):
Beam and block also referred to as Rib and Block, are mostly used in residential and industrial applications. This slab type is made up of pre-stressed beams and hollow blocks and are temporarily propped until set, typically after 21 days.
A Hollow core slab which are precast and installed on site with a crane.
In high rise buildings and skyscrapers, thinner, pre-cast concrete slabs are slung between the steel frames to form the floors and ceilings on each level. Cast in-situ slabs are used in high rise buildings and huge shopping complexes as well as houses. These in-situ slabs are cast on site using shutters and reinforced steel.
Kernkwadrant opdrachten voor het hoger beroepsonderwijsJfmverdonk
Oefenopdrachten voor het Kernkwadrant van Daniel Ofman. Een hulpmiddel om je kernkwaliteiten te leren. Maar ook om te groeien in je kwaliteiten door het ontdekken van je valkuilen en uitdagingen
L’importance des ouvrages de soutènement est capitale car leurs dysfonctionnement peut engendrer des
dégâts matériels et mettre en péril votre sécurité, cependant il est nécessaire de surveiller ces
ouvrages et déceler toute anomalie afin proposer des solutions de réparation ou d’entretien
avant la rupture (partielle ou totale)
This document provides an overview of bubble deck slabs, which are hollow core slabs invented in Denmark that virtually eliminate concrete from the middle of floor slabs, dramatically reducing weight. It discusses the types of bubble deck slabs, materials used, advantages like reduced weight and costs, and properties including equivalent bending strength, increased spans, reduced deflection, durability, fire resistance, and vibration performance compared to solid slabs. Projects using bubble deck slabs are also highlighted.
A concrete slab is a common structural element of modern buildings. Horizontal slabs of steel reinforced concrete, typically between 4 and 20 inches (100 and 500 millimeters) thick, are most often used to construct floors and ceilings, while thinner slabs are also used for exterior paving. Sometimes these thinner slabs, ranging from 2 inches (51 mm) to 6 inches (150 mm) thick, are called mud slabs, particularly when used under the main floor slabs[1] or in crawl spaces.[2]
In many domestic and industrial buildings a thick concrete slab, supported on foundations or directly on the subsoil, is used to construct the ground floor of a building. These can either be "ground-bearing" or "suspended" slabs. The slab is "ground-bearing" if it rests directly on the foundation, otherwise the slab is "suspended".[3] For double-storey or multi-storey buildings, the use of a few common types of concrete suspended slabs are used (for more types refer to the Concrete Slab#Design section below):
Beam and block also referred to as Rib and Block, are mostly used in residential and industrial applications. This slab type is made up of pre-stressed beams and hollow blocks and are temporarily propped until set, typically after 21 days.
A Hollow core slab which are precast and installed on site with a crane.
In high rise buildings and skyscrapers, thinner, pre-cast concrete slabs are slung between the steel frames to form the floors and ceilings on each level. Cast in-situ slabs are used in high rise buildings and huge shopping complexes as well as houses. These in-situ slabs are cast on site using shutters and reinforced steel.
Kernkwadrant opdrachten voor het hoger beroepsonderwijsJfmverdonk
Oefenopdrachten voor het Kernkwadrant van Daniel Ofman. Een hulpmiddel om je kernkwaliteiten te leren. Maar ook om te groeien in je kwaliteiten door het ontdekken van je valkuilen en uitdagingen
2. Overzicht bouwmethoden
• Stapelbouw
• Baksteen,
kalkzandsteen,
cellenbeton, betonsteen
• Montagebouw
• Casco van prefab beton
• wanden en vloeren
• Skeletbouw
• Van hout, staal, beton
• Kolommen en liggers
• Met portalen of spanten
(hallenbouw)
• Gietbouw
• Casco van n het werk
gestort beton
• Veelal met tunnel
bekisting
2JFM Verdonk
3. Overzicht bouwmethoden
• Stapelbouw
• Baksteen,
kalkzandsteen,
cellenbeton, betonsteen
• Montagebouw
• Casco van prefab beton
• wanden en vloeren
• Skeletbouw
• Van hout, staal, beton
• Kolommen en liggers
• Met portalen of spanten
• Gietbouw
• Casco van n het werk
gestort beton
• Veelal met tunnel
bekisting
3JFM Verdonk
5. Overzicht bouwmethoden
• Stapelbouw
• Baksteen,
kalkzandsteen,
cellenbeton, betonsteen
• Montagebouw
• Casco van prefab beton
• wanden en vloeren
• Skeletbouw
• Van hout, staal, beton
• Kolommen en liggers
• Met portalen of spanten
• Gietbouw
• Casco van n het werk
gestort beton
• Veelal met tunnel
bekisting
5JFM Verdonk
9. Overzicht bouwmethoden
• Stapelbouw
• Baksteen,
kalkzandsteen,
cellenbeton, betonsteen
• Montagebouw
• Casco van prefab beton
• wanden en vloeren
• Skeletbouw
• Van hout, staal, beton
• Kolommen en liggers
• Met portalen of spanten
• Gietbouw
• Casco van n het werk
gestort beton
• Veelal met tunnel
bekisting
9JFM Verdonk
10. Overzicht bouwmethoden
• Stapelbouw
• Baksteen,
kalkzandsteen,
cellenbeton, betonsteen
• Montagebouw
• Casco van prefab beton
• wanden en vloeren
• Skeletbouw
• Van hout, staal, beton
• Kolommen en liggers
• Met portalen of spanten
• Gietbouw
• Casco van n het werk
gestort beton
• Veelal met tunnel
bekisting
10JFM Verdonk
15. Programmeren (= het aanbrengen van de voorzieningen ín de
bekisting, zoals wandcontactdozen, deursparingen, loze leidingen etc),
maatvoering en plannen (logistiek)..
15
JFM Verdonk 15
19. Metal Stud
• Let op: de gewone MS is niet-constructief,
maar allen geschikt als binnenwand
• Voor draagconstructie is er het Steel
Framing System, dikker uitgevoerd
19JFM Verdonk
22. Spanten
Portaalconstructie ter ondersteuning van de
gordingen van een dak.
– Traditionele houten spanten
• Hollands spant: figuur 21.116 >
• Mansarde spant: figuur 21.118
– Gelamineerd houten spant >>
(figuur 21.127).
• Bijvoorbeeld gevingerlast en
verbeterd gelamineerd hout.
– Keper: een spant voor de hoeken
van een dakconstructie:
• Hoekkeper: uitwendige hoek >>>
(Figuur 21.129)
• Kilkeper: inwendige hoek (Figuur
21.132) 22
JFM Verdonk 22
23. ‘Vakwerk’
Op basis van driehoeken
• Vakwerkhuis
Bijvoorbeeld in Zuid-Limburg
of
• Vakwerkconstructie
opgebouwd uit driehoeken
2-dimensionaal
• Ruimtevakwerk
3-dimensionaal
23
JFM Verdonk 23
29. Optoppen
met hout- of staalskeletbouw
• Ophogen bestaande
gebouwen wordt
mogelijk door het lage
eigen gewicht >
• Ruimtelijke constructies
maken een gebouw
mogelijk als een brug >>
29
JFM Verdonk 29
32. Houten vloeren
Type vloer Omschrijving Figuur Overspanning
Vrijdragende
vloer
Houten balken met
houten vloerdelen of
overige beschieting
21.6 4-6m1
Samen-
gestelde
vloer
Houten balkenvloer
met onderslagbalk
21.10 6-8m1
HSB-vloer Sandwichpaneel van
houten ribben
Vgl.18.4 4-6 m1
(5-8m1)
32
JFM Verdonk 32
33. Stalen vloeren
Type vloer Omschrijving Figuur Overspanning
Staalplaat
(dak)vloer
Geprofileerde
staalplaat als vloer
Figuur
15.24
6-8m1
(dakvloer)
Staalbeton-
vloer
Combinatie van
stalen liggers en een
betonnen
bekistingplaatvloer
4-8m1
Zwaluw-
staartvloer
Staalplaat op houten
balklagen + cement
(renovatievloer)
Figuur
18.53
0,6m1
33
JFM Verdonk 33
34. Prefab betonnen vloeren
Balkenvloer gestorte betonvloer met balken H.18.3.2.a +
figuur 28.33
5 – 7 m1
Betoncassette vloer gestorte betonvloer met cassetten H.18.3.2.b +
figuur 28.35
7 – 9 m1
Ribcassette vloer Prefab ribbenplaatvloer met PS
cassettes en voorspanning
6 – 7,5m1
(BG- vloer)
Combinatievloer
(broodjes-vloer)
prefab betonbalkjes met daartussen
PS elementen, aangestort
H.18.3.2.f + fig.
18.47
Tot ca. 5,5 m1
(BG-vloer)
Kanaalplaat vloer prefab betonnen vloer van holle
platen
H.18.3.2.e +
figuur 18.43
Tot ca. 14 m1
(kantoorbreed)
Breedplaat-vloer Prefab betonnen bekistingplaat,
aangestort in het werk
•Speciaal type: Bubble Deck (bollenplaatvloer)
Tot ca. 7 m1
T-balken vloer betonvloer van prefab T-balken;
parkeergarages.
Figuur 18.42 Tot ca. 21 m1
(voorspanning)
Plaatvloer platen van cellenbeton, opgelegd op
stalen balken
Tot ca. 6 m1
34
JFM Verdonk 34
35. 1. Breedplaatvloer 2. Kanaalplaat vloer
(bekistingplaatvloer) Geen leidingen in de vloer. Wel grote
overspanningen. Dikte circa 200mm.
3. Combinatievloer 4. Ribcassette vloer
Balken-broodjes vloer. BG-vloer in de Beganegrond vloer
woningbouw. Combinatie met IHWG beton
35
JFM Verdonk 35
36. Betonnen vloeren ihwg
Type Omschrijving Overspanning
Stampbetonnen vloer Werkvloer; niet constructief nvt
Vloer op grondslag Betonnen vloer, direct
gestort op de bodem
nvt
Met (tunnel-)
bekisting
Laagbouw
woningbouw,
goedkoop
4,8 – 5,4 m1
Met (tunnel-)
bekisting
Laagbouw
woningbouw, luxe
5,5 – 7,2 m1
Met (tunnel-)
bekisting
Woningbouw
gestapeld
(appartementen)
6 – 7,2 m1
36
JFM Verdonk 36