Bolt grade comparision.pdf
•
0 likes•4 views
This document provides a summary of metric grade equivalents to ASTM grades for bolts of varying diameters: - Bolts 4.6 through M24 are equivalent to ASTM grade A307A or ASTM grade 5.8, depending on whether they are cold worked. - Bolts 8.8 through M24 are equivalent to ASTM grade A325, A193B7/A354BC, or F1554G105, depending on size, with minimum tensile strengths of 830 MPa. - Bolts 8.8.3 are equivalent to ASTM grade A325 Type 3 or A449 Type 3, with minimum tensile strengths of 830 MPa, for
Report
Share
Report
Share
Download to read offline
Recommended
Performance of Armor Steel Gas Metal Arc Welded Joints
This document discusses the performance of armor steel gas metal arc welded joints. It investigates welding Armox 500 T armor steel using the gas metal arc welding process with two different filler metals and joint configurations. The goal is to determine if the welded joints meet required tensile strength and absorbed energy standards. Results show that both single V-joint and single bevel joint configurations passed requirements, whether using carbon steel or austenitic stainless steel filler wire. Dilution was observed in single V joints and increased in single bevel joints. Increasing cooling rate improved strength and hardness near the weld. Both configurations also passed impact testing at -40°C. Corrosion rates of the welded joints were lower than the
Unit 4 trip
This document provides information on TRIP (TRansformation Induced Plasticity) steels from ArcelorMittal, including descriptions, applications, standards, availability, processing recommendations, and mechanical properties. TRIP steels offer high strength and ductility from their microstructure composed of islands of retained austenite and bainite in a ferritic matrix. They are suitable for automotive structural and reinforcement parts. The document discusses grades, coatings, formability, welding parameters, fatigue strength, and impact performance of TRIP steels. Technical support is available from ArcelorMittal for incorporating these steels.
catalog44
The document provides information on products manufactured by Keddco including swage nipples, bull plugs, and other oil country tubular goods. It lists available sizes and materials for each product, as well as specifications for threading, coatings, weld bevels, and markings. Standard, extra heavy, schedule 160, and double extra heavy weights are shown for swage nipples from 1/8" to 300" in size.
AMIF2014 – [Automotive] Pankaj Mallick, Materiali attuali e futuri per automo...
AMIF2014 – [Automotive] Pankaj Mallick, Materiali attuali e futuri per automo...ARTI-Apulian Regional Agency for Technology and Innovation
Advanced Materials International Forum, Bari 18-19 settembre, conferenza internazionale dedicata ai materiali avanzati e alle loro possibili applicazioni nei settori industriali, con un focus particolare sui trasporti (aerospazio, automotive, navale e cantieristico).Improved plasma cutting of stainless steel recent technology advancements all...
Recent advances in plasma cutting technology now allow fabricators to more efficiently cut stainless steel. Proper selection of cutting gas and settings optimized for the specific stainless steel grade are crucial. While challenges remain like molten metal viscosity and dross formation, new techniques such as mixing hydrogen and nitrogen gases can improve cut quality and speed. Advanced piercing methods extend the thickness range that can be successfully cut.
F568 m
This document is a standard specification for carbon and alloy steel externally threaded metric fasteners. It covers 9 property classes of metric fasteners from M1.6 to M100 diameter. The specification provides requirements for chemical composition and mechanical properties for each class. It references other standards for test methods, practices, and related specifications. When ordering fasteners to this specification, the order must include quantity, product name, dimensions, property class, and whether zinc coating is required.
Steel codes used in steel structure 5th semester word document
what are steel codes and their standard notions.uses of different hot rolled steels in steel structures.physical and chemical properties of different steels.
plasma arc machining
Plasma arc machining (PAM) uses a high-temperature plasma jet to melt and remove material. It works by ionizing gas into a plasma state over 50,000°C and directing it as a high-velocity stream onto the workpiece. PAM can machine hard metals with good accuracy and at a fast rate. It finds applications in tube mills, welding of specialty alloys, and nuclear systems. While expensive initially, PAM provides precision control. Variations include conventional, air, and dual-flow plasma arc cutting.
Recommended
Performance of Armor Steel Gas Metal Arc Welded Joints
This document discusses the performance of armor steel gas metal arc welded joints. It investigates welding Armox 500 T armor steel using the gas metal arc welding process with two different filler metals and joint configurations. The goal is to determine if the welded joints meet required tensile strength and absorbed energy standards. Results show that both single V-joint and single bevel joint configurations passed requirements, whether using carbon steel or austenitic stainless steel filler wire. Dilution was observed in single V joints and increased in single bevel joints. Increasing cooling rate improved strength and hardness near the weld. Both configurations also passed impact testing at -40°C. Corrosion rates of the welded joints were lower than the
Unit 4 trip
This document provides information on TRIP (TRansformation Induced Plasticity) steels from ArcelorMittal, including descriptions, applications, standards, availability, processing recommendations, and mechanical properties. TRIP steels offer high strength and ductility from their microstructure composed of islands of retained austenite and bainite in a ferritic matrix. They are suitable for automotive structural and reinforcement parts. The document discusses grades, coatings, formability, welding parameters, fatigue strength, and impact performance of TRIP steels. Technical support is available from ArcelorMittal for incorporating these steels.
catalog44
The document provides information on products manufactured by Keddco including swage nipples, bull plugs, and other oil country tubular goods. It lists available sizes and materials for each product, as well as specifications for threading, coatings, weld bevels, and markings. Standard, extra heavy, schedule 160, and double extra heavy weights are shown for swage nipples from 1/8" to 300" in size.
AMIF2014 – [Automotive] Pankaj Mallick, Materiali attuali e futuri per automo...
AMIF2014 – [Automotive] Pankaj Mallick, Materiali attuali e futuri per automo...ARTI-Apulian Regional Agency for Technology and Innovation
Advanced Materials International Forum, Bari 18-19 settembre, conferenza internazionale dedicata ai materiali avanzati e alle loro possibili applicazioni nei settori industriali, con un focus particolare sui trasporti (aerospazio, automotive, navale e cantieristico).Improved plasma cutting of stainless steel recent technology advancements all...
Recent advances in plasma cutting technology now allow fabricators to more efficiently cut stainless steel. Proper selection of cutting gas and settings optimized for the specific stainless steel grade are crucial. While challenges remain like molten metal viscosity and dross formation, new techniques such as mixing hydrogen and nitrogen gases can improve cut quality and speed. Advanced piercing methods extend the thickness range that can be successfully cut.
F568 m
This document is a standard specification for carbon and alloy steel externally threaded metric fasteners. It covers 9 property classes of metric fasteners from M1.6 to M100 diameter. The specification provides requirements for chemical composition and mechanical properties for each class. It references other standards for test methods, practices, and related specifications. When ordering fasteners to this specification, the order must include quantity, product name, dimensions, property class, and whether zinc coating is required.
Steel codes used in steel structure 5th semester word document
what are steel codes and their standard notions.uses of different hot rolled steels in steel structures.physical and chemical properties of different steels.
plasma arc machining
Plasma arc machining (PAM) uses a high-temperature plasma jet to melt and remove material. It works by ionizing gas into a plasma state over 50,000°C and directing it as a high-velocity stream onto the workpiece. PAM can machine hard metals with good accuracy and at a fast rate. It finds applications in tube mills, welding of specialty alloys, and nuclear systems. While expensive initially, PAM provides precision control. Variations include conventional, air, and dual-flow plasma arc cutting.
A review of effect of welding and post weld heat treatment on microstructure ...
Abstract
Today getting high thermal efficiency in thermal and nuclear power plant is a big challenge. Many new material are developed. SA 335 grade 91 steel is modified high chrome-moly martenstitic steel. This material is having excellent toughness and high temperature creep strength. During welding, this material is having tremendous change in its microstructure and hence mechanical property. Many research works were done in this area. This paper discusses weld ability of P91 material. Effect of different welding process, type of filler wire, its chemical composition and type of flux is discussed in this paper. PWHT is necessary after welding of P91 steel. PWHT temperature and its duration affects phase transformation and mechanical properties of weld metal, HAZ and parent metal. Major focus is given on hardness, creep resistance and notch toughness.
Keywords - P91, Welding, Microstructure, Toughness, Creep, Hardness, PWHT
experimental investigation of gas metal arc welding (gmaw) on 2.25
This document summarizes an experimental investigation of gas metal arc welding (GMAW) on 2.25 CR-1MO steel. It describes the GMAW process and equipment used, including a 400-amp ESAB welding machine. The document discusses the properties of 2.25 CR-1MO steel, including its tensile strength, hardness, and strength. It also details the experimental procedure, which involves butt welding steel plates with 1.6mm electrode wire at high heat input settings to study weld properties like microstructure and hardness.
IRJET- Optimization of Design Parameters and Nozzle Wear on CNC Plasma Ma...
This document discusses optimizing design parameters and minimizing nozzle wear on a CNC plasma cutting machine through experimentation. It begins with an abstract discussing recent research in machining and advances in technology. CNC plasma cutting is highlighted as an important non-traditional machining process for its precision, finishing ability, capability to machine hard materials, and complex shape generation. The document then discusses the experimental setup used, including the bed, gas bank, controller, sample material and size. It outlines the methodology, analyzed parameters from the experiments including dimensional accuracy, roughness and material removal rate. Results from different operating parameters from industry, manufacturers, and research are shown. Simulations of nozzle design and specifications are also presented.
Plasma Arc Machining
This document discusses plasma arc machining (PAM). PAM uses a high-velocity jet of heated gas at around 50,000°C to melt and remove material. Gases are ionized to form plasma which is directed at the workpiece. Key components of PAM systems include a plasma gun, power supply, and cooling mechanisms. PAM can machine hard metals and is used for applications like tube milling, welding specialty alloys, and nuclear pipe systems. Advantages are high production rates and ability to machine hard metals, while disadvantages include high initial costs and inefficient for large cavities. Various PAM types are also described such as conventional, air, and dual-flow systems.
Standard cr ni-mo-stainless_steels_datasheet
This document summarizes standard Cr-Ni-Mo stainless steels. Key points include:
- They have enhanced corrosion resistance compared to standard Cr-Ni grades due to their molybdenum content.
- Common grades include 316, 316L, 316Ti which have excellent formability, weldability, and impact strength.
- They are used in applications handling chemicals and in equipment for industries like pulp/paper, food, and pharmaceuticals.
- Molybdenum improves resistance to pitting and crevice corrosion, especially in environments with chlorides.
- They generally have good resistance to uniform corrosion in organic and inorganic chemicals.
Plasma Arc Machining
The document discusses plasma arc machining (PAM), which uses a high-temperature plasma jet to cut and shape materials. It explains that PAM involves heating gas to the plasma state (over 50,000°C), directing the plasma through a nozzle onto the workpiece. The document then covers the key components of PAM systems, including the plasma gun, power supply, cooling mechanisms, and applications for cutting different materials like steel and aluminum. Various types of plasma arc cutting methods are also outlined such as conventional, dual-flow, air, and underwater plasma cutting.
Astm bolt-nuts
The document discusses various ASTM bolt specifications. It provides details on specifications for bolts made of different materials, intended for different applications and temperature ranges. Specifications cover bolts made of steel, alloy steel and stainless steel. Each specification lists the grades of bolts it covers along with the minimum mechanical properties requirements for each grade.
IRJET- Optimization in Parameters of CNC Flame Cutting Machine
This document discusses optimizing the parameters of a CNC flame cutting machine. It begins with an introduction to flame cutting and CNC flame cutting machines. It then discusses the construction of typical CNC flame cutting machines. The methodology section outlines a process to optimize the machine parameters through testing sample cuts with different parameter settings from machine suppliers, nozzle suppliers, and industrial experts. Results of dimensional analysis and material removal rate are presented and analyzed. The conclusion determines that parameters optimized by the researchers led to minimized material removal rate, reduced burr formation, and better surface finish compared to supplier recommended settings.
2015_metglas_brazing_brochure
This document discusses Metglas amorphous brazing foils and their advantages over conventional brazing fillers. It provides details on various Metglas brazing foil compositions and their properties including chemical composition, melting temperatures, available geometries, and example applications. Specific foil compositions discussed include MBF15, MBF20, MBF30, MBF50, and MBF51 along with their corrosion resistance, brazing temperature ranges, and common uses.
Welding handbook.pdf
This document provides an overview of welding techniques including gas shielded arc welding processes like MIG/MAG and TIG welding. It discusses the principles and operation of MIG/MAG welding using solid wires and flux cored wires. For TIG welding it covers the choice of direct or alternating current, manual operation, and power sources. The document also provides welding parameters and recommendations for selecting the appropriate shielding gas for different materials.
Wear performance of ceramic cutting tool materials when cutting steel
The document summarizes the results of a study that tested the wear performance of various ceramic cutting tool materials when cutting steel. It found that alumina-based materials like alumina-zirconia (F) and alumina in submicron grain toughened by zirconia (G), as well as mixed-based alumina (Z), exhibited the best wear resistance when cutting steel at high speeds up to 11 m/s. These materials demonstrated tool lives between 180-300 seconds at the highest speed tested. In contrast, silicon nitride (S), sintered carbide (C), cubic boron nitride (B), and alumina reinforced with silicon carbide whiskers (W) showed
Steam Trapping and Steam Tracing Equipment
It’s pretty obvious, really. An efficient steam trap wastes less energy, which means you burn less fuel and reduce emissions.
The results are energy savings and a cleaner, healthier environment. By helping companies manage energy, Armstrong steam traps are also helping protect the world we all share.
As a steam trap wears, it loses efficiency and begins to waste energy. But Armstrong inverted bucket traps last years longer than other traps. They operate more efficiently longer because the inverted bucket is the most reliable steam trap operating principle known.
Clearly, the longer an efficient trap lasts, the more it reduces energy wasted, fuel burned and pollutants released into the air. It’s an all-around positive situation that lets the environment win, too. Bringing energy down to earth in your facility could begin with a renewed focus on your steam system, especially your steam traps. Said another way: Zeroing in your steam traps is an easy way to pay less money for energy—and more attention to the environment.
Companies around the world are beginning to realize that rather than being separate challenges, energy and the environment are and have always been a single mission. And that quality management in one area will surely impact the other.
The catalog below should be utilized as a guide for the installation and operation of steam trapping equipment. Selection or installation should always be accompanied by competent technical assistance or advice. Armstrong and its local representatives are available for consultation and technical assistance. We encourage you to contact your Armstrong Representative for complete details.
A493 09(2013) standard specification for stainless steel wire and wire rods f...
This document outlines standard specifications for stainless steel wire and wire rods intended for cold heading and forging applications where corrosion resistance is important. It specifies the chemical composition, mechanical properties, manufacturing process requirements, packaging and marking standards for various grades of austenitic, ferritic, and martensitic stainless steel wire. Key information purchasers must provide with orders and supplementary testing requirements are also defined.
ASTM A335 CHROME MOLY PIPE
With the largest chrome inventory in the world, Sunny Steel carries a wide range of ASTM A335 / ASME SA335 chrome moly alloy pipe in a variety of lengths, ODs, IDs and wall thicknesses to meet your project’s needs—including pipe in hard-to-find sizes.
Plasma arc machining by Himanshu Vaid
This document provides an overview of plasma arc machining (PAM). It describes the working principle of PAM, where gases are heated to a plasma state over 50,000°C and directed as a high-velocity stream onto a workpiece to melt and displace material. The document outlines the process details, which include a plasma gun, power supply, cooling mechanism, and workpiece. It discusses applications of PAM such as welding of alloys and cutting of tubes. Advantages include high production rates and ability to machine hard metals, while disadvantages include high initial costs and inefficient machining of large cavities. Finally, it describes different types of plasma arc cutting processes.
Plasma Technology In Metallurgy & Metal Working Industry
Presentation on Plasma Technology Uses In Metallurgy & Metal Working Industry By Mr. Arun Kumar (Managing Director - Technocrats Plasma Systems Private Limited).
Copper-nickel Welding
Copper-nickel alloys are readily welded and fabricated and have remarkable corrosion and biofouling resistance in seawater applications. The document provides guidance on welding and fabricating the two primary copper-nickel alloys (90-10 and 70-30), including cutting, forming, heat treatment, and general handling considerations to allow for good fabrication and operation. Welding and fabrication of copper-nickels requires a higher degree of cleanliness than carbon steels but the alloys are ductile and can be welded using common processes.
Bomba de condensado 180 gpm submittal
This document provides product data for a vertical split coupled pump including:
- Model number, flow rate of 180 GPM, head of 60 feet, and motor horsepower of 5.00 HP
- Materials of construction including cast iron, bronze, stainless steel, and ductile iron
- Dimensions, weights, performance curves showing flow rate vs head, and NPSH required
- Motor specifications of 380VAC, 3 phase, 60Hz
Optimization of TIG Welding Process Parameters With SS316 Material Using Tagu...
This document summarizes an experiment that optimized TIG welding process parameters for joining 3 mm thick SS316 sheets. Welding current, gas flow rate, and front/back weld width were considered. A Taguchi L9 orthogonal array was used to design 9 experiments varying the current (70, 80, 90 A) and gas flow rate (4, 6, 8 LPM). ANOVA analysis found that welding current had the most significant impact on the output parameters of front and back weld width, with higher currents producing wider widths. The optimal parameters were determined to be a current of 70 A and gas flow rate of 8 LPM, which produced the minimum front width of 4.31 mm.
Steel Plates
Steel plates are often used to make a variety of products through cutting and welding processes. Common applications include ships, bridges, buildings, pressure vessels, machinery, and military equipment. The document discusses the manufacturing process for steel plates including rolling, accelerated cooling, hot leveling, and ultrasonic testing to ensure quality. It then provides an overview of various international specifications for steel plates, outlining grades and their intended uses.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
More Related Content
Similar to Bolt grade comparision.pdf
A review of effect of welding and post weld heat treatment on microstructure ...
Abstract
Today getting high thermal efficiency in thermal and nuclear power plant is a big challenge. Many new material are developed. SA 335 grade 91 steel is modified high chrome-moly martenstitic steel. This material is having excellent toughness and high temperature creep strength. During welding, this material is having tremendous change in its microstructure and hence mechanical property. Many research works were done in this area. This paper discusses weld ability of P91 material. Effect of different welding process, type of filler wire, its chemical composition and type of flux is discussed in this paper. PWHT is necessary after welding of P91 steel. PWHT temperature and its duration affects phase transformation and mechanical properties of weld metal, HAZ and parent metal. Major focus is given on hardness, creep resistance and notch toughness.
Keywords - P91, Welding, Microstructure, Toughness, Creep, Hardness, PWHT
experimental investigation of gas metal arc welding (gmaw) on 2.25
This document summarizes an experimental investigation of gas metal arc welding (GMAW) on 2.25 CR-1MO steel. It describes the GMAW process and equipment used, including a 400-amp ESAB welding machine. The document discusses the properties of 2.25 CR-1MO steel, including its tensile strength, hardness, and strength. It also details the experimental procedure, which involves butt welding steel plates with 1.6mm electrode wire at high heat input settings to study weld properties like microstructure and hardness.
IRJET- Optimization of Design Parameters and Nozzle Wear on CNC Plasma Ma...
This document discusses optimizing design parameters and minimizing nozzle wear on a CNC plasma cutting machine through experimentation. It begins with an abstract discussing recent research in machining and advances in technology. CNC plasma cutting is highlighted as an important non-traditional machining process for its precision, finishing ability, capability to machine hard materials, and complex shape generation. The document then discusses the experimental setup used, including the bed, gas bank, controller, sample material and size. It outlines the methodology, analyzed parameters from the experiments including dimensional accuracy, roughness and material removal rate. Results from different operating parameters from industry, manufacturers, and research are shown. Simulations of nozzle design and specifications are also presented.
Plasma Arc Machining
This document discusses plasma arc machining (PAM). PAM uses a high-velocity jet of heated gas at around 50,000°C to melt and remove material. Gases are ionized to form plasma which is directed at the workpiece. Key components of PAM systems include a plasma gun, power supply, and cooling mechanisms. PAM can machine hard metals and is used for applications like tube milling, welding specialty alloys, and nuclear pipe systems. Advantages are high production rates and ability to machine hard metals, while disadvantages include high initial costs and inefficient for large cavities. Various PAM types are also described such as conventional, air, and dual-flow systems.
Standard cr ni-mo-stainless_steels_datasheet
This document summarizes standard Cr-Ni-Mo stainless steels. Key points include:
- They have enhanced corrosion resistance compared to standard Cr-Ni grades due to their molybdenum content.
- Common grades include 316, 316L, 316Ti which have excellent formability, weldability, and impact strength.
- They are used in applications handling chemicals and in equipment for industries like pulp/paper, food, and pharmaceuticals.
- Molybdenum improves resistance to pitting and crevice corrosion, especially in environments with chlorides.
- They generally have good resistance to uniform corrosion in organic and inorganic chemicals.
Plasma Arc Machining
The document discusses plasma arc machining (PAM), which uses a high-temperature plasma jet to cut and shape materials. It explains that PAM involves heating gas to the plasma state (over 50,000°C), directing the plasma through a nozzle onto the workpiece. The document then covers the key components of PAM systems, including the plasma gun, power supply, cooling mechanisms, and applications for cutting different materials like steel and aluminum. Various types of plasma arc cutting methods are also outlined such as conventional, dual-flow, air, and underwater plasma cutting.
Astm bolt-nuts
The document discusses various ASTM bolt specifications. It provides details on specifications for bolts made of different materials, intended for different applications and temperature ranges. Specifications cover bolts made of steel, alloy steel and stainless steel. Each specification lists the grades of bolts it covers along with the minimum mechanical properties requirements for each grade.
IRJET- Optimization in Parameters of CNC Flame Cutting Machine
This document discusses optimizing the parameters of a CNC flame cutting machine. It begins with an introduction to flame cutting and CNC flame cutting machines. It then discusses the construction of typical CNC flame cutting machines. The methodology section outlines a process to optimize the machine parameters through testing sample cuts with different parameter settings from machine suppliers, nozzle suppliers, and industrial experts. Results of dimensional analysis and material removal rate are presented and analyzed. The conclusion determines that parameters optimized by the researchers led to minimized material removal rate, reduced burr formation, and better surface finish compared to supplier recommended settings.
2015_metglas_brazing_brochure
This document discusses Metglas amorphous brazing foils and their advantages over conventional brazing fillers. It provides details on various Metglas brazing foil compositions and their properties including chemical composition, melting temperatures, available geometries, and example applications. Specific foil compositions discussed include MBF15, MBF20, MBF30, MBF50, and MBF51 along with their corrosion resistance, brazing temperature ranges, and common uses.
Welding handbook.pdf
This document provides an overview of welding techniques including gas shielded arc welding processes like MIG/MAG and TIG welding. It discusses the principles and operation of MIG/MAG welding using solid wires and flux cored wires. For TIG welding it covers the choice of direct or alternating current, manual operation, and power sources. The document also provides welding parameters and recommendations for selecting the appropriate shielding gas for different materials.
Wear performance of ceramic cutting tool materials when cutting steel
The document summarizes the results of a study that tested the wear performance of various ceramic cutting tool materials when cutting steel. It found that alumina-based materials like alumina-zirconia (F) and alumina in submicron grain toughened by zirconia (G), as well as mixed-based alumina (Z), exhibited the best wear resistance when cutting steel at high speeds up to 11 m/s. These materials demonstrated tool lives between 180-300 seconds at the highest speed tested. In contrast, silicon nitride (S), sintered carbide (C), cubic boron nitride (B), and alumina reinforced with silicon carbide whiskers (W) showed
Steam Trapping and Steam Tracing Equipment
It’s pretty obvious, really. An efficient steam trap wastes less energy, which means you burn less fuel and reduce emissions.
The results are energy savings and a cleaner, healthier environment. By helping companies manage energy, Armstrong steam traps are also helping protect the world we all share.
As a steam trap wears, it loses efficiency and begins to waste energy. But Armstrong inverted bucket traps last years longer than other traps. They operate more efficiently longer because the inverted bucket is the most reliable steam trap operating principle known.
Clearly, the longer an efficient trap lasts, the more it reduces energy wasted, fuel burned and pollutants released into the air. It’s an all-around positive situation that lets the environment win, too. Bringing energy down to earth in your facility could begin with a renewed focus on your steam system, especially your steam traps. Said another way: Zeroing in your steam traps is an easy way to pay less money for energy—and more attention to the environment.
Companies around the world are beginning to realize that rather than being separate challenges, energy and the environment are and have always been a single mission. And that quality management in one area will surely impact the other.
The catalog below should be utilized as a guide for the installation and operation of steam trapping equipment. Selection or installation should always be accompanied by competent technical assistance or advice. Armstrong and its local representatives are available for consultation and technical assistance. We encourage you to contact your Armstrong Representative for complete details.
A493 09(2013) standard specification for stainless steel wire and wire rods f...
This document outlines standard specifications for stainless steel wire and wire rods intended for cold heading and forging applications where corrosion resistance is important. It specifies the chemical composition, mechanical properties, manufacturing process requirements, packaging and marking standards for various grades of austenitic, ferritic, and martensitic stainless steel wire. Key information purchasers must provide with orders and supplementary testing requirements are also defined.
ASTM A335 CHROME MOLY PIPE
With the largest chrome inventory in the world, Sunny Steel carries a wide range of ASTM A335 / ASME SA335 chrome moly alloy pipe in a variety of lengths, ODs, IDs and wall thicknesses to meet your project’s needs—including pipe in hard-to-find sizes.
Plasma arc machining by Himanshu Vaid
This document provides an overview of plasma arc machining (PAM). It describes the working principle of PAM, where gases are heated to a plasma state over 50,000°C and directed as a high-velocity stream onto a workpiece to melt and displace material. The document outlines the process details, which include a plasma gun, power supply, cooling mechanism, and workpiece. It discusses applications of PAM such as welding of alloys and cutting of tubes. Advantages include high production rates and ability to machine hard metals, while disadvantages include high initial costs and inefficient machining of large cavities. Finally, it describes different types of plasma arc cutting processes.
Plasma Technology In Metallurgy & Metal Working Industry
Presentation on Plasma Technology Uses In Metallurgy & Metal Working Industry By Mr. Arun Kumar (Managing Director - Technocrats Plasma Systems Private Limited).
Copper-nickel Welding
Copper-nickel alloys are readily welded and fabricated and have remarkable corrosion and biofouling resistance in seawater applications. The document provides guidance on welding and fabricating the two primary copper-nickel alloys (90-10 and 70-30), including cutting, forming, heat treatment, and general handling considerations to allow for good fabrication and operation. Welding and fabrication of copper-nickels requires a higher degree of cleanliness than carbon steels but the alloys are ductile and can be welded using common processes.
Bomba de condensado 180 gpm submittal
This document provides product data for a vertical split coupled pump including:
- Model number, flow rate of 180 GPM, head of 60 feet, and motor horsepower of 5.00 HP
- Materials of construction including cast iron, bronze, stainless steel, and ductile iron
- Dimensions, weights, performance curves showing flow rate vs head, and NPSH required
- Motor specifications of 380VAC, 3 phase, 60Hz
Optimization of TIG Welding Process Parameters With SS316 Material Using Tagu...
This document summarizes an experiment that optimized TIG welding process parameters for joining 3 mm thick SS316 sheets. Welding current, gas flow rate, and front/back weld width were considered. A Taguchi L9 orthogonal array was used to design 9 experiments varying the current (70, 80, 90 A) and gas flow rate (4, 6, 8 LPM). ANOVA analysis found that welding current had the most significant impact on the output parameters of front and back weld width, with higher currents producing wider widths. The optimal parameters were determined to be a current of 70 A and gas flow rate of 8 LPM, which produced the minimum front width of 4.31 mm.
Steel Plates
Steel plates are often used to make a variety of products through cutting and welding processes. Common applications include ships, bridges, buildings, pressure vessels, machinery, and military equipment. The document discusses the manufacturing process for steel plates including rolling, accelerated cooling, hot leveling, and ultrasonic testing to ensure quality. It then provides an overview of various international specifications for steel plates, outlining grades and their intended uses.
Similar to Bolt grade comparision.pdf (20)
A review of effect of welding and post weld heat treatment on microstructure ...
A review of effect of welding and post weld heat treatment on microstructure ...
experimental investigation of gas metal arc welding (gmaw) on 2.25
experimental investigation of gas metal arc welding (gmaw) on 2.25
IRJET- Optimization of Design Parameters and Nozzle Wear on CNC Plasma Ma...
IRJET- Optimization of Design Parameters and Nozzle Wear on CNC Plasma Ma...
IRJET- Optimization in Parameters of CNC Flame Cutting Machine
IRJET- Optimization in Parameters of CNC Flame Cutting Machine
Wear performance of ceramic cutting tool materials when cutting steel
Wear performance of ceramic cutting tool materials when cutting steel
A493 09(2013) standard specification for stainless steel wire and wire rods f...
A493 09(2013) standard specification for stainless steel wire and wire rods f...
Plasma Technology In Metallurgy & Metal Working Industry
Plasma Technology In Metallurgy & Metal Working Industry
Optimization of TIG Welding Process Parameters With SS316 Material Using Tagu...
Optimization of TIG Welding Process Parameters With SS316 Material Using Tagu...
Recently uploaded
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Recently uploaded (20)
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Bolt grade comparision.pdf
- 1. 6/18/22, 5:22 PM » Print Template https://www.portlandbolt.com/print/?table=4133 1/1 sales@portlandbolt.com (800) 547-6758 ASTM Equivalents for Metric Grades © 1996-2022 Portland Bolt & Manufacturing Company | (800) 547-6758 | www.portlandbolt.com Diameter Range Metric Grade Approximate ASTM Equivalent Description Tensile, min Yield, min Mpa ksi Mpa ksi All 4.6 A307A Low or medium carbon steel 400 58 240 35 through 1" (M24) 5.8 - Cold worked low or medium carbon steel 520 75 420 61 through 1" (M24) 8.8 A449 / F3125 Grade A325 Heat treated medium carbon steel 830 120 660 96 above 1" (M24) 8.8 A193B7/A354BC or F1554G105 Heat treated medium carbon steel 830 120 660 96 through 1-1/2" (M36) 8.8.3 A325 Type 3 / A449 Type 3 Heat treated medium carbon weathering steel 830 120 660 96 All 10.9 A490/A354BD Heat treated medium carbon alloy steel 1040 151 940 136 through 1-1/2" (M36) 10.9.3 A490 Type 3 Heat treated medium carbon alloy weathering steel 1040 151 940 136 All 12.9 A574 Heat treated alloy steel 1220 177 1100 160