BICC Bicon BW20S LSF Cable Gland Kit (Prysmian 420LSF-52)
•
0 likes•1,184 views
The document summarizes a BW LSOH Gland Kit for terminating LSOH cables indoors. The kit includes a brass gland, earth tag, locknut, and shroud(s) to provide mechanical cable retention and electrical continuity. It specifies the kit for various cable sizes, listing the dimensions of the gland and cable entry/armor specifications for each. Technical details note the material composition, applicable standards and specifications, temperature range, and manufacturer information.
Report
Share
Report
Share
Download to read offline
Recommended
Prysmian BICC BICON BW KM410 Brass Cable Glands NEW
The BW Gland Kit is an industrial indoor cable gland for terminating steel wire armored cables. It comprises a brass gland, earth tag, locknut, and PVC shroud. The kit is suitable for dry, dust-free environments and provides mechanical cable retention and electrical continuity. It is available in sizes from 11.6mm to 85mm and is designed for terminating steel wire armored cables commonly used in industrial applications.
Prysmian BW20S Brass Cable Gland Kit, 11.6-15.8mm
This document provides specifications for BW brass cable glands from the 410BW series. It lists the cable diameters and armour wire sizes accommodated by each gland reference, along with the gland dimensions. A range of minimum and maximum measurements are provided for cable diameter, ISO thread entry, overall length, and hexagon size. Accessories including backnuts, shrouds, and cleats are also specified. The glands are suitable for single wire armoured, plastic or rubber sheathed cables for use in dry, indoor situations.
CMP BW LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero ...
CMP BW LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero ...Thorne & Derrick International
This document provides information on cable gland and cable connection products from CMP, including two types of cable gland kits: the BW SOLO kit for indoor use and the CW SOLO kit for indoor and outdoor use. Both kits provide mechanical cable retention and electrical continuity for single wire armour cables. They include cable glands, locknuts, tags, and CMP SOLO LSF shrouds or seals. Technical data is provided on material, temperature range, cable types, and dimensions. A cable gland selection table lists available gland sizes and references.A2 LSF Brass Cable Glands - BICC, BICON, Prysmian
This document provides information on an A1/A2 LSOH Brass Gland Kit that includes a brass gland, locknut, and shroud for securing circular, unarmored plastic or rubber cables. The kit is suitable for indoor and outdoor use in most climatic conditions and temperatures between -20°C and +90°C. Technical specifications and dimensions for gland kits in various sizes are provided.
Prysmian A220SS 423LSF-71 (3.5-8.5mm) LSF Brass BICON Gland Kits
This document provides information on an A1/A2 LSOH Gland Kit for securing low smoke zero halogen (LSOH) unarmored cables. The kit includes a brass gland, locknut, and LSOH shroud for cables between 3.5-67mm in diameter. It is suitable for indoor and outdoor use in most climatic conditions and is waterproof. The kit complies with various industry standards and has approval for underground installation in subway systems.
WT Henley Heavy Duty 4 Pole Insulated Cut-outs
This document provides information on a four pole insulated heavy duty cut-out rated from 200A to 400A. It has a new incoming termination arrangement suitable for both stranded and solid copper or aluminum conductors from 95-300mm2. Each phase is contained within a separate enclosure for operator protection and easy cabling. It is made from flame retardant and electrically tracking resistant polyester material. Narrow carriers with 82mm fixing centers provide phase connection and isolation, and various neutral/earth arrangements are available. Cable entry is via a PVC grommet for installations where space is limited or a three-cable entry sealing chamber for a more traditional installation. Incoming termination uses a mechanical connector that accepts a 95-300mm
E1W LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero Hal...
E1W LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero Hal...Thorne & Derrick International
The document provides installation instructions for CMP cable gland types "E" for terminating cables. It describes the components of the cable gland and provides a 5 step process for installation. Accessories like locknuts and earthing tags are also available. Technical specifications and sizing information is included in tables for different cable gland sizes that can accommodate varying cable diameters.Hawke Universal Cable Glands - Installation Instruction
This document provides instructions for assembling a cable gland. It includes:
1) An overview of the cable gland components and their assembly order.
2) Detailed steps for preparing the cable and gland, including stripping lengths, spreading the armour, and tightening nuts.
3) Notes on accessories that may be required like shrouds or locknuts.
4) Specifications for the cable gland such as temperature range, certification standards, and cable acceptance sizes.
Recommended
Prysmian BICC BICON BW KM410 Brass Cable Glands NEW
The BW Gland Kit is an industrial indoor cable gland for terminating steel wire armored cables. It comprises a brass gland, earth tag, locknut, and PVC shroud. The kit is suitable for dry, dust-free environments and provides mechanical cable retention and electrical continuity. It is available in sizes from 11.6mm to 85mm and is designed for terminating steel wire armored cables commonly used in industrial applications.
Prysmian BW20S Brass Cable Gland Kit, 11.6-15.8mm
This document provides specifications for BW brass cable glands from the 410BW series. It lists the cable diameters and armour wire sizes accommodated by each gland reference, along with the gland dimensions. A range of minimum and maximum measurements are provided for cable diameter, ISO thread entry, overall length, and hexagon size. Accessories including backnuts, shrouds, and cleats are also specified. The glands are suitable for single wire armoured, plastic or rubber sheathed cables for use in dry, indoor situations.
CMP BW LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero ...
CMP BW LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero ...Thorne & Derrick International
This document provides information on cable gland and cable connection products from CMP, including two types of cable gland kits: the BW SOLO kit for indoor use and the CW SOLO kit for indoor and outdoor use. Both kits provide mechanical cable retention and electrical continuity for single wire armour cables. They include cable glands, locknuts, tags, and CMP SOLO LSF shrouds or seals. Technical data is provided on material, temperature range, cable types, and dimensions. A cable gland selection table lists available gland sizes and references.A2 LSF Brass Cable Glands - BICC, BICON, Prysmian
This document provides information on an A1/A2 LSOH Brass Gland Kit that includes a brass gland, locknut, and shroud for securing circular, unarmored plastic or rubber cables. The kit is suitable for indoor and outdoor use in most climatic conditions and temperatures between -20°C and +90°C. Technical specifications and dimensions for gland kits in various sizes are provided.
Prysmian A220SS 423LSF-71 (3.5-8.5mm) LSF Brass BICON Gland Kits
This document provides information on an A1/A2 LSOH Gland Kit for securing low smoke zero halogen (LSOH) unarmored cables. The kit includes a brass gland, locknut, and LSOH shroud for cables between 3.5-67mm in diameter. It is suitable for indoor and outdoor use in most climatic conditions and is waterproof. The kit complies with various industry standards and has approval for underground installation in subway systems.
WT Henley Heavy Duty 4 Pole Insulated Cut-outs
This document provides information on a four pole insulated heavy duty cut-out rated from 200A to 400A. It has a new incoming termination arrangement suitable for both stranded and solid copper or aluminum conductors from 95-300mm2. Each phase is contained within a separate enclosure for operator protection and easy cabling. It is made from flame retardant and electrically tracking resistant polyester material. Narrow carriers with 82mm fixing centers provide phase connection and isolation, and various neutral/earth arrangements are available. Cable entry is via a PVC grommet for installations where space is limited or a three-cable entry sealing chamber for a more traditional installation. Incoming termination uses a mechanical connector that accepts a 95-300mm
E1W LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero Hal...
E1W LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero Hal...Thorne & Derrick International
The document provides installation instructions for CMP cable gland types "E" for terminating cables. It describes the components of the cable gland and provides a 5 step process for installation. Accessories like locknuts and earthing tags are also available. Technical specifications and sizing information is included in tables for different cable gland sizes that can accommodate varying cable diameters.Hawke Universal Cable Glands - Installation Instruction
This document provides instructions for assembling a cable gland. It includes:
1) An overview of the cable gland components and their assembly order.
2) Detailed steps for preparing the cable and gland, including stripping lengths, spreading the armour, and tightening nuts.
3) Notes on accessories that may be required like shrouds or locknuts.
4) Specifications for the cable gland such as temperature range, certification standards, and cable acceptance sizes.
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...Thorne & Derrick International
This document provides information on heat shrink terminations for low voltage PILC cables ranging from 0.6/1kV. It lists the part numbers, cable ranges, and tail lengths for single core and 3 core indoor/outdoor heat shrink terminations for XLPE and PILC cables ranging from 1.9/3.6kV. It also lists part numbers for 3/4 core PILC cable terminations ranging from 4-300mm2 with tail lengths of 600mm or 1000mm. An note indicates that for 4 core terminations, the last digit of the part number should read -4.3M Cold Shrink QT-III 7600-3W and 7600 Series Cable Terminations - Specificat...
3M Cold Shrink QT-III 7600-3W and 7600 Series Cable Terminations - Specificat...Thorne & Derrick International
This document provides information on 3M's Cold Shrink QT-III Silicone Rubber Three-Conductor Cable Termination Kit, including a product description, kit contents, features, applications, environmental performance, and termination type selection tables. The kit is designed to terminate medium voltage 3-conductor shielded power cables without ground wires for indoor or outdoor applications in the 5, 8, 15, 25/28, and 35kV classes. The kit contains silicone rubber components that are resistant to heat, UV radiation, ozone, and retain hydrophobicity. Tables provide guidance on selecting the appropriate termination kit based on voltage class, cable insulation size, and installation environment.3M LCT1 Cold Shrink Termination Kit 35-50sqmm, 0.6/1kV-3.3kV
This document summarizes 3M's cold shrink joints and terminations for low voltage cables. It describes how the products use prestretched tubes that shrink to provide a waterproof seal over cable connections or terminations. Various kits are listed for splicing or abandoning different cable types and voltages, ranging from 0.6/1kV to 6.6kV. Installation is simple with no special tools or heat required. The products are resistant to environmental factors and suitable for indoor and outdoor use.
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...Thorne & Derrick International
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
WT Henley Pole Mounted Cut-outs
This document summarizes two pole-mounted fused cutout models for providing low voltage power supply to rural dwellings. The standard model is robust, designed for ease of use with a slide-fit front cover and accepts fuselinks up to 400A. The compact model can be pole, wall, or cross arm mounted, has mechanical terminals that don't require additional lugs, and accepts conductors between 70-300mm2. Both are designed to meet IP43 rating and BS7656:1993 compliance standards.
Ellis Patents Phoenix Cable Cleats - Fire Proof Resistant Cable Cleats
Ellis Patents Phoenix Cable Cleats - Fire Proof Resistant Cable CleatsThorne & Derrick International
The Phoenix Cable Clamp datasheet summarizes fire resistance testing and specifications for various cable clamp models. Short circuit testing was completed successfully in accordance with IEC 61914:2009. The cable clamps are manufactured from 316L Stainless Steel and comply with fire resistance standards BS 8491:2008 and BS 5839-1: 2002. Dimensions, weight, cable diameter ranges and fixing holes are provided for each model number.CMP CW CIEL 20 Brass Cable Gland - 12.5-20.9mm
This document provides information on CMP cable glands. It describes the CW CIEL cable gland as providing IP66 sealing for armored cables, with mechanical retention and electrical continuity. It has a unique cast integral earth lug concept suitable for high voltage systems requiring high fault current protection. The document also includes a cable gland selection table with technical specifications and dimensions for different gland sizes.
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kVThorne & Derrick International
This document provides information on heat shrink joints for low voltage cables. It describes the components of the joints, which include adhesive lined tubes, armour cages, rings and clamps, and heat shrink tubes. The joints are intended for voltages up to 3.3kV and cable sizes ranging from 1.5mm2 to 630mm2. Part numbers are provided for single core and multicore joints for XLPE, PILC and transition cables. The joints are designed to meet industry standards and have an unlimited shelf life.Raychem Tyco XAGA 550 Joint Closure (Unpressurized Copper Telephone Networks)
Raychem Tyco XAGA 550 Joint Closure (Unpressurized Copper Telephone Networks)Thorne & Derrick International
Raychem Tyco XAGA 550 Joint Closure (Unpressurized Copper Telephone Networks)
Tyco Raychem XAGA 550
*Heat-shrinkable composite joint closure system for environmental and mechanical protection of joints in the unpressurised telephone network
*The composite structure of the reinforced Rayfort sleeve offers an excellent resistance to mechanical abuse during and after the installation
*The integrated moisture barrier completely reconstitutes the cable sheath over the total splice area
*The hot-melt adhesive forms a watertight seal to the cable sheath
*Up to 3 cables at each end can be accommodated using three finger clips with hot-melt adhesive
*Correct installation indication: heat sensitive paint and adhesive flow
SPS Heat Shrink Terminations XLPE/SWA/PVC Cables 0.6/1kV
The document provides information on heat shrink cable terminations for XLPE/SWA/PVC cables with voltages up to 1kV. It lists the available part numbers for 2, 3, and 4 core cable termination kits along with the applicable cable size ranges. Optional accessories include longer tail lengths for the core tubes, bolt-on earth glands, and test reports. Contact and product information is also provided for the manufacturer.
Pfisterer Sicon High Voltage Mechanical Shearbolt Connectors
The document describes a new type of cable connector called SICON that uses a stepless shear bolt. Key points:
1) SICON uses a stepless shear bolt that does not have predetermined breaking points, allowing it to achieve optimum clamping force for any conductor size.
2) Previous multi-stage shear bolts had breaking points that created discontinuities and did not allow maximum force. SICON's bolt breaks smoothly.
3) SICON provides up to 30% increased contact force on aluminum conductors compared to conventional connectors and ensures full utilization of the bolt's clamping ability.
BW Brass Cable Glands - BICC, BICON, Prysmian
This document provides information about BW Brass Gland Kits for securing armored cables. The kits contain brass glands, earth tags, locknuts, and PVC shrouds for retaining and providing electrical continuity for armored cables. The kits are suitable for indoor use with galvanized steel cabled between 11.6mm to 67.9mm in diameter. The kits are made from brass alloy for strength and performance in temperatures ranging from -20°C to +90°C.
Heat Shrink Cable Joints for Track Circuit, Power, Signal & Telecom Cables
Heat Shrink Cable Joints for Track Circuit, Power, Signal & Telecom CablesThorne & Derrick International
This document provides information on various cable joint kits and components for rail signalling applications. It includes track circuit rail connection kits, track circuit cable joint kits, duplicated track circuit cable joint kits, flexible tail cable and data link cable joint kits, lineside multicore signalling cable joint kits, power cable joint kits, yellow bonding kits, heatshrinkable cable glands and joints, telecom joint kits, and additional products like gas torch kits. Component details, kit contents, and application information is provided for each item listed.Underground Cable Jointing Kits up to 4 Core 2.5sqmm XLPE/SWA - BK1
This document provides information on low voltage resin joints for joining cables with nominal conductor areas ranging from 1.5 to 400 mm2. It lists the kit reference codes (BK1, BK2, etc.) that can be used for different cable diameters and conductor areas. The kits contain molds, resin, armor continuity components, tape, and instructions for safer, faster, easier and more reliable cable joining. Each kit joins PVC, SWA, or XLPE cables for street lighting applications up to 1kV.
Fire Alarm & Fire Detection Cables For Building - Why Manage Service Cables I...
Fire Alarm & Fire Detection Cables For Building - Why Manage Service Cables I...Thorne & Derrick International
This document discusses the dangers of plastic cable trunking and ties in building fires. It summarizes several incidents where firefighters died after becoming entangled in cables that had fallen due to melting plastic supports. The coroner's report on one incident recommended replacing all plastic trunking and ties with fire-resistant cable supports. The document advocates changing building regulations to require fire-resistant cable supports for all wires, not just fire alarms. It provides guidance on selecting non-combustible cable accessories and securely fixing cables to prevent collapse in fires.BW LSF Brass Cable Glands - BICC, BICON, Prysmian
This document provides information on the BW LSOH Brass Gland Kit, which is an indoor gland kit for securing and providing electrical continuity to steel-armored plastic or rubber sheathed cables. The kit includes a brass gland, earth tag, locknut, and silicone shroud. It is suitable for dry, dust-free indoor applications with operating temperatures between -20°C and +90°C. Technical specifications are provided for kits supporting cables from 11mm to 75mm in diameter.
Prysmian BW20S LSF BICON Brass Cable Glands
This document provides information on the BW LSOH Brass Gland Kit, which is an indoor gland kit for securing and providing electrical continuity for sheathed cables. The kit includes a brass gland, earth tag, locknut, and shroud. It is suitable for dry, dust-free indoor applications with cables up to 67.9mm in diameter. The kit is made of corrosion-resistant brass alloy and can operate in temperatures ranging from -20°C to +90°C.
Prysmian Draka - Oil, Marine & Gas Cable Presentation
The presentation provides information on Prysmian Group, the world's largest cable company, and its Aberdeen distribution center. Key details include:
- Prysmian Group has €8.2B in annual turnover, operates in 50 countries with 98 plants and 22,000 employees, and has over 130 years of combined experience.
- The Aberdeen distribution center services the North Sea oil & gas industry, stocking over 300km of offshore and marine cables. It can handle orders from a few meters up to major projects involving thousands of meters.
- The center supplies common cable types like BS6883, BS7917, NEK606, IEEE45 cables to clients like BP, Transocean
Prysmian Offshore Cables - NEK606, IEC60092, BS6883, BS7197 Power & Control C...
Prysmian Offshore Cables - NEK606, IEC60092, BS6883, BS7197 Power & Control C...Thorne & Derrick International
Prysmian TechnergyTM Offshore cables provide integrated cabling solutions for offshore platforms that excel at performing under demanding conditions, preserving human safety, and protecting the environment. The cables have chemical resistant properties and fire safety features that promote longer operational lifetimes and increased safety. Prysmian offers a complete range of customized power and communication cables, as well as installation expertise, for all offshore networking needs.Flexicon Flexible Conduit - Hazardous Areas ATEX Conduit Catalogue
EXD Hazardous Area Barrier Glands from Flexicon are manufactured from nickel plated brass with a nylon seal, to an IP rating of IP66, IP67, IP68 (5bar) and IP69K - ATEX certified barrier glands are suitable for use with Flexicon flexible conduit (liquid tight types) in Zone 1, Zone 2, Zone 21 and Zone 22.
EXD flameproof barrier glands are suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas, when used with the Flexicon range of liquid-tight flexible conduits.
Hazardous Area Barrier Gland (ATEX) Certified
• High mechanical strength
• Suitable for threaded entries
• Operating temperature of -60oC to +85oC
• Two-part epoxy solid-setting putty, gloves and mixing instructions
ATEX barrier glands for indoor or outdoor use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of cables housed in Liquid Tight flexible conduit systems. ATEX barrier glands are suitable for knockouts or threaded entries. Nickel plated brass compression fitting comprising of body, nut, earthing ferrule, nylon compression seal and compound barrier. The compound barrier seals around the cable conductors for hazardous area cable glanding on conduit systems. The earthing ferrule is manufactured in machined nickel plated brass to facilitate easy assembly and re-use. Also ensures high mechanical strength and electrical continuity.
Flexicon flexible conduits with ATEX flameproof barrier glands (LTP-EXD flameproof barrier glands) are suitable for use with Flexicon LTP, LTPHC, LTPUL, LTPSS and LTPPU conduits.
Power Cable Joints for Hazardous Areas (Zone 1 & 2)
The document discusses 3M inline joint and termination kits for hazardous area armored power cables. The kits contain Scotchcast resin that encapsulates cable joints, making them suitable for areas with gas, oil, sewage, or chemical spillage in petrochemical zones 1 and 2. A table provides the kit reference numbers and specifications for various cable and joint sizes that the kits are designed to accommodate.
DNV Electrical Installations Standard DNV OS D201 April 2011
This document provides a summary of changes made to DNV-OS-D201 Electrical Installations from October 2008 to April 2011. Some key changes include:
- References to ship types were removed.
- Requirements for voltage harmonic distortion limits were increased.
- Requirements for systems on offshore units with two machinery spaces and no emergency generator were updated.
- Sections on lighting systems, power supplies to control systems, and harmonic filter protection were modified.
- Documentation requirements tables were included and aligned with other DNV standards.
- Semiconductor converters can now be certified through a two-stage process at the manufacturer and assembly sites.
More Related Content
What's hot
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...Thorne & Derrick International
This document provides information on heat shrink terminations for low voltage PILC cables ranging from 0.6/1kV. It lists the part numbers, cable ranges, and tail lengths for single core and 3 core indoor/outdoor heat shrink terminations for XLPE and PILC cables ranging from 1.9/3.6kV. It also lists part numbers for 3/4 core PILC cable terminations ranging from 4-300mm2 with tail lengths of 600mm or 1000mm. An note indicates that for 4 core terminations, the last digit of the part number should read -4.3M Cold Shrink QT-III 7600-3W and 7600 Series Cable Terminations - Specificat...
3M Cold Shrink QT-III 7600-3W and 7600 Series Cable Terminations - Specificat...Thorne & Derrick International
This document provides information on 3M's Cold Shrink QT-III Silicone Rubber Three-Conductor Cable Termination Kit, including a product description, kit contents, features, applications, environmental performance, and termination type selection tables. The kit is designed to terminate medium voltage 3-conductor shielded power cables without ground wires for indoor or outdoor applications in the 5, 8, 15, 25/28, and 35kV classes. The kit contains silicone rubber components that are resistant to heat, UV radiation, ozone, and retain hydrophobicity. Tables provide guidance on selecting the appropriate termination kit based on voltage class, cable insulation size, and installation environment.3M LCT1 Cold Shrink Termination Kit 35-50sqmm, 0.6/1kV-3.3kV
This document summarizes 3M's cold shrink joints and terminations for low voltage cables. It describes how the products use prestretched tubes that shrink to provide a waterproof seal over cable connections or terminations. Various kits are listed for splicing or abandoning different cable types and voltages, ranging from 0.6/1kV to 6.6kV. Installation is simple with no special tools or heat required. The products are resistant to environmental factors and suitable for indoor and outdoor use.
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...Thorne & Derrick International
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP CIEL Cast Integral Earth Lug - Aluminium HV Cable Glands
High voltage single core power cables (3.3kV, 6.6kV, 11kV, 33kV) can generate high fault current ratings via aluminium wire armours (AWA) where the actual fault current may exceed that of the standard CMP earth tag - it is vital for low and high voltage electrical safety to match the rated fault current of the cable gland earth tag to that of the cable armour. CMP unique Cast Integral Earth Lug (CIEL) cable gland designs overcome potential overheating and possible flash over problems - CMP BW CIEL, CMP CW CIEL, CMP E1W CIEL, CMP E1FW CIEL, CMP E2W CIEL and CMP E2FW CIEL cable gland ranges.
CMP CIEL 20S to 40mm - 26.0kA for 1 second short circuit fault rating
CMP CIEL 50s to 90mm - 43.0kA for 1 second short circuit fault rating
CMP Cast Integral Earth Lug (CIEL) Aluminium Cable Glands IP66 for SWA Cable Termination at High Voltage - Specification
CMP CW CIEL type aluminium cable gland for use with all types of low voltage and high voltage Single Wire Armour (SWA) cable providing an environmental seal on the cable outer sheath, mechanical retention and electrical continuity via armour wire termination. All CMP cable glands are EMC Tested. CMP CW CIEL range of industrial aluminium cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from aluminium. The CW CIEL aluminium cable gland provides a high fault current rated cable termination complete with a CMP unique Cast Integral Earth Lug concept - especially suitable for medium and high voltage electrical cables and systems where a high level of protection against short circuit earth fault currents is required.
WT Henley Pole Mounted Cut-outs
This document summarizes two pole-mounted fused cutout models for providing low voltage power supply to rural dwellings. The standard model is robust, designed for ease of use with a slide-fit front cover and accepts fuselinks up to 400A. The compact model can be pole, wall, or cross arm mounted, has mechanical terminals that don't require additional lugs, and accepts conductors between 70-300mm2. Both are designed to meet IP43 rating and BS7656:1993 compliance standards.
Ellis Patents Phoenix Cable Cleats - Fire Proof Resistant Cable Cleats
Ellis Patents Phoenix Cable Cleats - Fire Proof Resistant Cable CleatsThorne & Derrick International
The Phoenix Cable Clamp datasheet summarizes fire resistance testing and specifications for various cable clamp models. Short circuit testing was completed successfully in accordance with IEC 61914:2009. The cable clamps are manufactured from 316L Stainless Steel and comply with fire resistance standards BS 8491:2008 and BS 5839-1: 2002. Dimensions, weight, cable diameter ranges and fixing holes are provided for each model number.CMP CW CIEL 20 Brass Cable Gland - 12.5-20.9mm
This document provides information on CMP cable glands. It describes the CW CIEL cable gland as providing IP66 sealing for armored cables, with mechanical retention and electrical continuity. It has a unique cast integral earth lug concept suitable for high voltage systems requiring high fault current protection. The document also includes a cable gland selection table with technical specifications and dimensions for different gland sizes.
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kVThorne & Derrick International
This document provides information on heat shrink joints for low voltage cables. It describes the components of the joints, which include adhesive lined tubes, armour cages, rings and clamps, and heat shrink tubes. The joints are intended for voltages up to 3.3kV and cable sizes ranging from 1.5mm2 to 630mm2. Part numbers are provided for single core and multicore joints for XLPE, PILC and transition cables. The joints are designed to meet industry standards and have an unlimited shelf life.Raychem Tyco XAGA 550 Joint Closure (Unpressurized Copper Telephone Networks)
Raychem Tyco XAGA 550 Joint Closure (Unpressurized Copper Telephone Networks)Thorne & Derrick International
Raychem Tyco XAGA 550 Joint Closure (Unpressurized Copper Telephone Networks)
Tyco Raychem XAGA 550
*Heat-shrinkable composite joint closure system for environmental and mechanical protection of joints in the unpressurised telephone network
*The composite structure of the reinforced Rayfort sleeve offers an excellent resistance to mechanical abuse during and after the installation
*The integrated moisture barrier completely reconstitutes the cable sheath over the total splice area
*The hot-melt adhesive forms a watertight seal to the cable sheath
*Up to 3 cables at each end can be accommodated using three finger clips with hot-melt adhesive
*Correct installation indication: heat sensitive paint and adhesive flow
SPS Heat Shrink Terminations XLPE/SWA/PVC Cables 0.6/1kV
The document provides information on heat shrink cable terminations for XLPE/SWA/PVC cables with voltages up to 1kV. It lists the available part numbers for 2, 3, and 4 core cable termination kits along with the applicable cable size ranges. Optional accessories include longer tail lengths for the core tubes, bolt-on earth glands, and test reports. Contact and product information is also provided for the manufacturer.
Pfisterer Sicon High Voltage Mechanical Shearbolt Connectors
The document describes a new type of cable connector called SICON that uses a stepless shear bolt. Key points:
1) SICON uses a stepless shear bolt that does not have predetermined breaking points, allowing it to achieve optimum clamping force for any conductor size.
2) Previous multi-stage shear bolts had breaking points that created discontinuities and did not allow maximum force. SICON's bolt breaks smoothly.
3) SICON provides up to 30% increased contact force on aluminum conductors compared to conventional connectors and ensures full utilization of the bolt's clamping ability.
BW Brass Cable Glands - BICC, BICON, Prysmian
This document provides information about BW Brass Gland Kits for securing armored cables. The kits contain brass glands, earth tags, locknuts, and PVC shrouds for retaining and providing electrical continuity for armored cables. The kits are suitable for indoor use with galvanized steel cabled between 11.6mm to 67.9mm in diameter. The kits are made from brass alloy for strength and performance in temperatures ranging from -20°C to +90°C.
Heat Shrink Cable Joints for Track Circuit, Power, Signal & Telecom Cables
Heat Shrink Cable Joints for Track Circuit, Power, Signal & Telecom CablesThorne & Derrick International
This document provides information on various cable joint kits and components for rail signalling applications. It includes track circuit rail connection kits, track circuit cable joint kits, duplicated track circuit cable joint kits, flexible tail cable and data link cable joint kits, lineside multicore signalling cable joint kits, power cable joint kits, yellow bonding kits, heatshrinkable cable glands and joints, telecom joint kits, and additional products like gas torch kits. Component details, kit contents, and application information is provided for each item listed.Underground Cable Jointing Kits up to 4 Core 2.5sqmm XLPE/SWA - BK1
This document provides information on low voltage resin joints for joining cables with nominal conductor areas ranging from 1.5 to 400 mm2. It lists the kit reference codes (BK1, BK2, etc.) that can be used for different cable diameters and conductor areas. The kits contain molds, resin, armor continuity components, tape, and instructions for safer, faster, easier and more reliable cable joining. Each kit joins PVC, SWA, or XLPE cables for street lighting applications up to 1kV.
Fire Alarm & Fire Detection Cables For Building - Why Manage Service Cables I...
Fire Alarm & Fire Detection Cables For Building - Why Manage Service Cables I...Thorne & Derrick International
This document discusses the dangers of plastic cable trunking and ties in building fires. It summarizes several incidents where firefighters died after becoming entangled in cables that had fallen due to melting plastic supports. The coroner's report on one incident recommended replacing all plastic trunking and ties with fire-resistant cable supports. The document advocates changing building regulations to require fire-resistant cable supports for all wires, not just fire alarms. It provides guidance on selecting non-combustible cable accessories and securely fixing cables to prevent collapse in fires.BW LSF Brass Cable Glands - BICC, BICON, Prysmian
This document provides information on the BW LSOH Brass Gland Kit, which is an indoor gland kit for securing and providing electrical continuity to steel-armored plastic or rubber sheathed cables. The kit includes a brass gland, earth tag, locknut, and silicone shroud. It is suitable for dry, dust-free indoor applications with operating temperatures between -20°C and +90°C. Technical specifications are provided for kits supporting cables from 11mm to 75mm in diameter.
What's hot (16)
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...
3M Cold Shrink QT-III 7600-3W and 7600 Series Cable Terminations - Specificat...
3M Cold Shrink QT-III 7600-3W and 7600 Series Cable Terminations - Specificat...
3M LCT1 Cold Shrink Termination Kit 35-50sqmm, 0.6/1kV-3.3kV
3M LCT1 Cold Shrink Termination Kit 35-50sqmm, 0.6/1kV-3.3kV
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...
CMP CW CIEL Aluminium Cable Glands - CMP Cable Glands with Cast Integral Eart...
Ellis Patents Phoenix Cable Cleats - Fire Proof Resistant Cable Cleats
Ellis Patents Phoenix Cable Cleats - Fire Proof Resistant Cable Cleats
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV
Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV
Raychem Tyco XAGA 550 Joint Closure (Unpressurized Copper Telephone Networks)
Raychem Tyco XAGA 550 Joint Closure (Unpressurized Copper Telephone Networks)
SPS Heat Shrink Terminations XLPE/SWA/PVC Cables 0.6/1kV
SPS Heat Shrink Terminations XLPE/SWA/PVC Cables 0.6/1kV
Pfisterer Sicon High Voltage Mechanical Shearbolt Connectors
Pfisterer Sicon High Voltage Mechanical Shearbolt Connectors
Heat Shrink Cable Joints for Track Circuit, Power, Signal & Telecom Cables
Heat Shrink Cable Joints for Track Circuit, Power, Signal & Telecom Cables
Underground Cable Jointing Kits up to 4 Core 2.5sqmm XLPE/SWA - BK1
Underground Cable Jointing Kits up to 4 Core 2.5sqmm XLPE/SWA - BK1
Fire Alarm & Fire Detection Cables For Building - Why Manage Service Cables I...
Fire Alarm & Fire Detection Cables For Building - Why Manage Service Cables I...
Viewers also liked
Prysmian BW20S LSF BICON Brass Cable Glands
This document provides information on the BW LSOH Brass Gland Kit, which is an indoor gland kit for securing and providing electrical continuity for sheathed cables. The kit includes a brass gland, earth tag, locknut, and shroud. It is suitable for dry, dust-free indoor applications with cables up to 67.9mm in diameter. The kit is made of corrosion-resistant brass alloy and can operate in temperatures ranging from -20°C to +90°C.
Prysmian Draka - Oil, Marine & Gas Cable Presentation
The presentation provides information on Prysmian Group, the world's largest cable company, and its Aberdeen distribution center. Key details include:
- Prysmian Group has €8.2B in annual turnover, operates in 50 countries with 98 plants and 22,000 employees, and has over 130 years of combined experience.
- The Aberdeen distribution center services the North Sea oil & gas industry, stocking over 300km of offshore and marine cables. It can handle orders from a few meters up to major projects involving thousands of meters.
- The center supplies common cable types like BS6883, BS7917, NEK606, IEEE45 cables to clients like BP, Transocean
Prysmian Offshore Cables - NEK606, IEC60092, BS6883, BS7197 Power & Control C...
Prysmian Offshore Cables - NEK606, IEC60092, BS6883, BS7197 Power & Control C...Thorne & Derrick International
Prysmian TechnergyTM Offshore cables provide integrated cabling solutions for offshore platforms that excel at performing under demanding conditions, preserving human safety, and protecting the environment. The cables have chemical resistant properties and fire safety features that promote longer operational lifetimes and increased safety. Prysmian offers a complete range of customized power and communication cables, as well as installation expertise, for all offshore networking needs.Flexicon Flexible Conduit - Hazardous Areas ATEX Conduit Catalogue
EXD Hazardous Area Barrier Glands from Flexicon are manufactured from nickel plated brass with a nylon seal, to an IP rating of IP66, IP67, IP68 (5bar) and IP69K - ATEX certified barrier glands are suitable for use with Flexicon flexible conduit (liquid tight types) in Zone 1, Zone 2, Zone 21 and Zone 22.
EXD flameproof barrier glands are suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas, when used with the Flexicon range of liquid-tight flexible conduits.
Hazardous Area Barrier Gland (ATEX) Certified
• High mechanical strength
• Suitable for threaded entries
• Operating temperature of -60oC to +85oC
• Two-part epoxy solid-setting putty, gloves and mixing instructions
ATEX barrier glands for indoor or outdoor use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of cables housed in Liquid Tight flexible conduit systems. ATEX barrier glands are suitable for knockouts or threaded entries. Nickel plated brass compression fitting comprising of body, nut, earthing ferrule, nylon compression seal and compound barrier. The compound barrier seals around the cable conductors for hazardous area cable glanding on conduit systems. The earthing ferrule is manufactured in machined nickel plated brass to facilitate easy assembly and re-use. Also ensures high mechanical strength and electrical continuity.
Flexicon flexible conduits with ATEX flameproof barrier glands (LTP-EXD flameproof barrier glands) are suitable for use with Flexicon LTP, LTPHC, LTPUL, LTPSS and LTPPU conduits.
Power Cable Joints for Hazardous Areas (Zone 1 & 2)
The document discusses 3M inline joint and termination kits for hazardous area armored power cables. The kits contain Scotchcast resin that encapsulates cable joints, making them suitable for areas with gas, oil, sewage, or chemical spillage in petrochemical zones 1 and 2. A table provides the kit reference numbers and specifications for various cable and joint sizes that the kits are designed to accommodate.
DNV Electrical Installations Standard DNV OS D201 April 2011
This document provides a summary of changes made to DNV-OS-D201 Electrical Installations from October 2008 to April 2011. Some key changes include:
- References to ship types were removed.
- Requirements for voltage harmonic distortion limits were increased.
- Requirements for systems on offshore units with two machinery spaces and no emergency generator were updated.
- Sections on lighting systems, power supplies to control systems, and harmonic filter protection were modified.
- Documentation requirements tables were included and aligned with other DNV standards.
- Semiconductor converters can now be certified through a two-stage process at the manufacturer and assembly sites.
Viewers also liked (6)
Prysmian Draka - Oil, Marine & Gas Cable Presentation
Prysmian Draka - Oil, Marine & Gas Cable Presentation
Prysmian Offshore Cables - NEK606, IEC60092, BS6883, BS7197 Power & Control C...
Prysmian Offshore Cables - NEK606, IEC60092, BS6883, BS7197 Power & Control C...
Flexicon Flexible Conduit - Hazardous Areas ATEX Conduit Catalogue
Flexicon Flexible Conduit - Hazardous Areas ATEX Conduit Catalogue
Power Cable Joints for Hazardous Areas (Zone 1 & 2)
Power Cable Joints for Hazardous Areas (Zone 1 & 2)
DNV Electrical Installations Standard DNV OS D201 April 2011
DNV Electrical Installations Standard DNV OS D201 April 2011
Similar to BICC Bicon BW20S LSF Cable Gland Kit (Prysmian 420LSF-52)
Prysmian BICC BICON A2 423LSF Brass LSF Cable Glands NEW
This document provides information on an A1/A2 LSOH Gland Kit for securing low smoke zero halogen (LSOH) unarmored cables. The kit includes a brass gland, locknut, and LSOH shroud for cables between 3.5-67mm in diameter. It is suitable for indoor and outdoor use in most climatic conditions and is waterproof. The kit complies with various industry standards and has approval for use on the London Underground network.
CW20 432LSF53 Prysmian BICON Aluminium Cable Glands
This document provides information on the CW-AL LSOH Gland Kit for connecting and sealing aluminium wire armored cables. The kit includes gland, earth tag, locknut, and shroud for protecting cables up to 63mm in diameter. It is suitable for indoor and outdoor use in most climatic conditions and provides waterproof and weatherproof sealing for the cable connection.
CW LSF Brass Cable Glands - Prysmian BICC BICON 422LSF NEW
This document provides specifications for a CW LSOH Gland Kit that includes brass glands, earth tags, locknuts, and shrouds for securing low smoke zero halogen (LSOH) cables. The kit is suitable for indoor and outdoor use with galvanized steel or plastic/rubber sheathed LSOH cables in most climatic conditions. It has three-part armor locking and meets fire performance standards with approval from London Underground for subsurface installations. Specifications include kit contents and dimensions, material information, temperature rating, compliance standards, and manufacturer details.
Nexans Euromold 430TB Screened Separable Connectors 400 Series, up to 630A 33...
Nexans Euromold 430TB Screened Separable Connectors 400 Series, up to 630A 33...Thorne & Derrick International
The document is a catalogue from Euromold, a manufacturer of medium voltage cable accessories. It provides information on Euromold's symmetrical separable connectors for Interface C, including the 400LB elbow connector, 400TB and 440TB tee connectors, and 440PB coupling connector. It describes the components, applications, standards, and ordering information for these connector products.SEPCO Steel Electric Conduit & Cable Fittings - Rigid IMC Fittings
SEPCO Steel Electric Products Company was founded in 1938 as a metal fabricating and stamping company by Morris Reddock and his son Philip, and incorporated in 1952. SEPCO carried a product line which included EMT and rigid one-hole and two-hole pipe straps, reducing washers and switch box supports. Malleable iron, steel and die-cast fittings were added to the product line and SEPCO now currently carries approximately 2,000 SKU's with trade sizes 1/2" - 6" on most product groups and is a leading manufacturer in the elctrical industry. All SEPCO products carry the full UL listing.
B3_Communications_Brochure
B3 Cable Solutions is a leading cable manufacturer that operates globally. It produces a wide range of cabling products for telecommunications and other industries. These include optical fiber cables, copper cables, and other cabling solutions. B3 prides itself on high quality products and world-class customer service. It invites potential customers to learn more about its cabling solutions by visiting its website or contacting a local office.
Prysmian BW20 LSF BICON Brass Cable Glands
This document provides information about BW Brass Gland Kits for securing armored cables. The kits contain brass glands, earth tags, locknuts, and PVC shrouds for retaining and providing electrical continuity for armored cables. The kits are suitable for indoor use with galvanized steel cabled between 11.6mm to 67.9mm in diameter. Each kit contains the appropriate sized components to securely fasten the specified range of cable diameters.
Nexans Euromold Interface C 400 Symmetrical Series Cable Connectors
This document provides information on Euromold's medium voltage symmetrical separable connectors, including the Interface C connectors. It describes the 400LB elbow connector, 400TB and 440TB tee connectors, their design, specifications, standards, kit contents and ordering instructions. Euromold is a leading European manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution.
Nexans Euromold MV Separable Connectors & Bushings - Interface C Symmetrical
Nexans Euromold MV Separable Connectors & Bushings - Interface C SymmetricalThorne & Derrick International
This document provides information on Euromold's medium voltage symmetrical separable connectors, including the Interface C connectors. It describes the 400LB elbow connector, 400TB and 440TB tee connectors, their design, specifications, standards, kit contents and ordering instructions. Euromold is a leading European manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution.KINGO - seceri - ADSS Cable Accessories
Professional manufacturer and supplier of ADSS Optical Fiber Cable Anchoring Clamps, Wedge Type Dead End Clamps Overhead Line, Tension Clamps.
Thông số kĩ thuật siemens fuse 002
Thông số kĩ thuật siemens fuse 002Công ty cổ phần OKS | Tổng thầu thi công Nhà máy GMP, Tổng thầu thi công Nhà kho GSP
This document provides an overview of Siemens LV 30 low voltage fuses and fuse systems, including NEOZED fuses. It summarizes the standards, sizes, utilization categories, ratings, and technical specifications for different fuse types. Selection and ordering data is also provided with part numbers, descriptions, and weights for NEOZED fuses, bases, links, and other mounting components.Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Atlas cable cleats suit trefoil and single way cable applications where high levels of short circuit withstand are required.
As well as providing the cables with significant mechanical support, the unique patented Atlas cable cleat design provides a choice of one bolt, two bolt or framing channel fixing options.
Manufactured in stainless and galvanised steel all range taking Atlas cable cleats are supplied with a stainless steel top bolt to eliminate eddy currents.
To protect and cushion the cables during short circuit conditions the Atlas cable cleat comes with integral LSF Zero Halogen Polymeric pads.
Ellis Patents Atlas range taking cable cleats have been tested in accordance with the European Standard of "Cable Cleats for Electrical Installations" BS EN 50368 : 2003 - Ellis Patents are the global leader in the manufacture of quality and trusted single way, trefoil, quadrafoil and range taking cable cleats.
Thông số kĩ thuật siemens-sr60 busbar system
Thông số kĩ thuật siemens-sr60 busbar systemCông ty cổ phần OKS | Tổng thầu thi công Nhà máy GMP, Tổng thầu thi công Nhà kho GSP
The document summarizes the SR60 busbar system, including:
1) The system is modular for busbars in distribution boards with 60 mm spacing and includes busbar routings, mounting components, and covers for touch protection.
2) The busbar supports are adjustable for different busbar dimensions and terminals can be mounted without inserting from the side.
3) The system is designed for ALPHA distribution panels between 250-1250 mm and includes components like supports, enclosures, terminals, and fuse bases.Prysmian BW50 Brass Cable Gland Kit 44.0-52.6mm
This document provides information about BW brass cable glands:
- It describes BW glands as suitable for single wire armored, plastic or rubber sheathed cables for use in dry, indoor situations.
- Details are given for the cable dimensions accommodated, gland dimensions, accessories, and hexagon sizes for different gland models ranging from 8.6-78mm in diameter.
- Contact information is provided for Thorne and Derrick, the manufacturer of the glands.
Prysmian BW20 Brass Cable Gland Kit 13.9-20.8mm
This document provides information about BW brass cable glands:
- It describes BW glands as suitable for single wire armored, plastic or rubber sheathed cables for use in dry, indoor situations.
- Details are given for the cable dimensions accommodated, gland dimensions, accessories, and hexagon sizes for different gland models ranging from 8.6-78mm in diameter.
- Contact information is provided for Thorne and Derrick, the manufacturer of the glands.
Prysmian BW25 Brass Cable Gland Kit 19.5-27.20mm
This document provides specifications for BW brass cable glands from the 410BW series. It lists the cable diameters and armour wire sizes accommodated by each gland reference, along with the gland dimensions. A range of minimum and maximum measurements are provided for cable diameter, ISO thread entry, overall length, and hexagon size. Accessories including backnuts, shrouds, and cleats are also specified. The glands are suitable for single wire armoured, plastic or rubber sheathed cables for use in dry, indoor situations.
Prysmian BW75 Brass Cable Gland Kit 67.9-78.0mm
This document provides specifications for BW brass cable glands from the 410BW series. It lists the cable dimensions each gland can accommodate, the gland dimensions, and accessories. The glands are suitable for single wire armored, plastic or rubber sheathed cables for dry, indoor use. Accessories include backnuts, shrouds, and jointing components.
Prysmian BW40 Brass Cable Gland Kit 32.1-39.9mm
This document provides information about BW brass cable glands, including:
- BW glands are suitable for single wire armored, plastic or rubber sheathed cables for use in dry, indoor situations.
- The glands come in a low cost two part design and accommodate cable diameters from 8.6-78 mm.
- Details are given on cable and gland dimensions, ISO threads, and accessories like backnuts and shrouds.
Prysmian BW63 Brass Cable Gland Kit 55.9-65.3mm
This document provides specifications for BW brass cable glands from the 410BW series. It lists the cable dimensions each gland can accommodate, the gland dimensions, and accessories. The glands are suitable for single wire armored, plastic or rubber sheathed cables for dry, indoor use. Accessories include backnuts, shrouds, and jointing components.
Prysmian BW32 Brass Cable Gland Kit 26.2-33.5mm
This document provides information about BW brass cable glands:
- It describes BW glands as suitable for single wire armored, plastic or rubber sheathed cables for use in dry, indoor situations.
- Details are given for the cable dimensions accommodated, gland dimensions, accessories, and hexagon sizes for different gland models ranging from 8.6-78mm in diameter.
- Contact information is provided for Thorne and Derrick, the manufacturer of the glands.
Similar to BICC Bicon BW20S LSF Cable Gland Kit (Prysmian 420LSF-52) (20)
Prysmian BICC BICON A2 423LSF Brass LSF Cable Glands NEW
Prysmian BICC BICON A2 423LSF Brass LSF Cable Glands NEW
CW20 432LSF53 Prysmian BICON Aluminium Cable Glands
CW20 432LSF53 Prysmian BICON Aluminium Cable Glands
CW LSF Brass Cable Glands - Prysmian BICC BICON 422LSF NEW
CW LSF Brass Cable Glands - Prysmian BICC BICON 422LSF NEW
Nexans Euromold 430TB Screened Separable Connectors 400 Series, up to 630A 33...
Nexans Euromold 430TB Screened Separable Connectors 400 Series, up to 630A 33...
SEPCO Steel Electric Conduit & Cable Fittings - Rigid IMC Fittings
SEPCO Steel Electric Conduit & Cable Fittings - Rigid IMC Fittings
Nexans Euromold Interface C 400 Symmetrical Series Cable Connectors
Nexans Euromold Interface C 400 Symmetrical Series Cable Connectors
Nexans Euromold MV Separable Connectors & Bushings - Interface C Symmetrical
Nexans Euromold MV Separable Connectors & Bushings - Interface C Symmetrical
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Things to Consider When Choosing a Website Developer for your Website | FODUU
Choosing the right website developer is crucial for your business. This article covers essential factors to consider, including experience, portfolio, technical skills, communication, pricing, reputation & reviews, cost and budget considerations and post-launch support. Make an informed decision to ensure your website meets your business goals.
CAKE: Sharing Slices of Confidential Data on Blockchain
Presented at the CAiSE 2024 Forum, Intelligent Information Systems, June 6th, Limassol, Cyprus.
Synopsis: Cooperative information systems typically involve various entities in a collaborative process within a distributed environment. Blockchain technology offers a mechanism for automating such processes, even when only partial trust exists among participants. The data stored on the blockchain is replicated across all nodes in the network, ensuring accessibility to all participants. While this aspect facilitates traceability, integrity, and persistence, it poses challenges for adopting public blockchains in enterprise settings due to confidentiality issues. In this paper, we present a software tool named Control Access via Key Encryption (CAKE), designed to ensure data confidentiality in scenarios involving public blockchains. After outlining its core components and functionalities, we showcase the application of CAKE in the context of a real-world cyber-security project within the logistics domain.
Paper: https://doi.org/10.1007/978-3-031-61000-4_16
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Recently uploaded (20)
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Things to Consider When Choosing a Website Developer for your Website | FODUU
Things to Consider When Choosing a Website Developer for your Website | FODUU
CAKE: Sharing Slices of Confidential Data on Blockchain
CAKE: Sharing Slices of Confidential Data on Blockchain
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
BICC Bicon BW20S LSF Cable Gland Kit (Prysmian 420LSF-52)
- 1. BW LSOH Gland Kit 420LSFSeries Features and benefits: • Indoor type for LSOH SWA cable • Brass indoor gland and LSOH accessories • For galvanized-steel single-wire armour plastic or rubber LSOH sheathed cables • For use in dry, dust free situations • Provides mechanical cable retention and electrical continuity via armour locking mechanism Kit comprises: BW Gland Brass Earth Tag Brass Locknut LSOH Shroud (2 per kit up to and including 25mm size) The BW Gland kit is an industrial indoor cable gland for rapid termination of LS0H cables.
- 2. Specifications BWLSOHGLANDKIT26062014 Gland Kit Reference Cable Dimensions mm Gland Dimensions mm Design Reference Size Qty per Kit Under Armour Ø (A) Armour Wire Ø Entry Thread (D) Thread Length (E) Protrusion Length (F) Hexagon Max A/F (G) A/C (H) 420LSF-52 20S 2 11.6 0.9 M20×1.5 10 24 22 24.9 420LSF-53 20 2 13.9 0.9/1.25 M20×1.5 10 25 27 30.5 420LSF-55 25 2 19.9 1.25/1.6 M25×1.5 10 26 32.9 36.8 420LSF-56 32 1 26.2 1.6/2.0 M32×1.5 10 28 42.4 47.8 420LSF-57 40 1 32.1 1.6/2.0 M40×1.5 15 25 50 57 420LSF-59 50 1 44.0 2.0/2.5 M50×1.5 15 36 70.1 77.2 420LSF-61 63 1 55.9 2.5 M63×1.5 15 30 80 87.4 420LSF-62 75S 1 61.9 2.5 M75×1.5 15 40 85 95 420LSF-63 75 1 67.9 2.5 M75×1.5 15 40 98.8 109.2 Technical Information: Suitable for use with all Steel Wire Armoured Cables inc: BS 6724 CuZn39Pb3 brass alloy used for guaranteed strength and performance Complies with BS 6121-1: 2005 Service temperature range -20°C to +90°C Complies with LU Standard 1-085 for installation in all sub-surface locations LUL APR Product ID 1968 Prysmian Cables Systems Limited, Oak Road, Wrexham Industrial Estate, Wrexham, LL13 9PH, UK Commercial Enquiries, Sales Office Tel: 0845 767 8345, International Sales Office Tel: +44 2380 295481 www.biconcomponents.co.uk