The document outlines the configuration of benefits management in SAP HR, detailing the creation and categorization of various benefit plans such as health, insurance, and savings. Key steps include defining benefit areas, assigning currencies, establishing eligibility criteria, and configuring employee contributions based on different parameters. It emphasizes the importance of customizing each benefit plan according to employee data, ensuring efficient management of employee benefits in the system.

1. SAP HR Collections
Entire HR in SAP at a glance
Benefits Configuration
Benefit Area:
Benefit areas allow you to have separate administration of different benefit plan pools. This division is primarily for administrational
purposes and would not normally be used for eligibility
IMG Path: Personnel Management Benefits Basic Se�ings Define Benefit Area
Assign Currency to Benefit Area:
In this step, you specify the currency for the benefit area
IMG Path: Personnel Management Benefits Basic Se�ings Assign Currency
this step, you enter the providers of the benefit plans you offer.
This could be the Insurance company, or Health Maintenance Organization that receives the benefit plan costs
IMG Path: Personnel Management Benefits Basic Se�ings Define Benefit Providers
In this step, you set relevant benefit area for your Customizing activities
If you have more than one benefit area to set up, you must set up each independently. After you have set up all the plans in one area, you
must return to this view, set the next current benefit area and work through the IMG again, se�ing up the new benefit area.
IMG Path: Personnel Management Benefits Basic Se�ings Set Current Benefit Area
Benefit Plan Types:
In this step, you enter the benefit plan types that you require for the plan categories predefined in the system.
The following plan categories are provided by MSD:
• Health Plans
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
1 of 16 27-12-2022, 20:04

2. o Medical
o Dental
o Vision
• Insurance Plans
o Basic Life
o Supplemental Life
o Accidental Death & Dismember
• Savings Plans
o 403B
o 457
o PERS (Public Employees retirement Scheme for CP Benefit Plan) & TRS
(Teachers Retirement Scheme for TP Benefit Plan)
• Flexible Spending Accounts
o Health care
o Dependent care
IMG Path: Personnel Management Benefits Basic Se�ings Plan A�ributes Define Benefit Plan Types
Advertisements
REPORT THIS AD
Define Benefit Plan Status:
It is important that you assigning statuses in order to be able to control the availability of plans with a minimum of effort. For example,
you can control whether or not employees can enroll in a plan simply by changing its status
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
2 of 16 27-12-2022, 20:04

3. IMG Path: Personnel Management Benefits Basic Se�ings Plan A�ributes Define Benefit Plan Status
Benefit Plan Status:
In this step, you define parameter groups. You decide which groups you require in two stages:
1. You consider which costs, credits, coverage and employee and employer contributions for your plans vary according to the age, salary
and/or seniority of employees (or possibly the age of the employee’s spouse).
2. You determine the different ways in which you need to divide your employees according to different value ranges for these criteria.
It is not possible to define overlaps of ranges for a criterion within a single parameter group. Therefore, if you require different employee
groupings for different plans, you need to create a separate parameter group.
For each unique combination of criteria and their values, you need to define a parameter group.
In this step, you simply create the parameter groups to which you assign groups for the individual criteria in the following steps. You later
refer to the parameter groups, where applicable, in the individual rule variants for plans. Since one parameter group can be referenced by
multiple plans, Customizing effort is kept to a minimum. In the plan variant, you also have the flexibility of being able to specify that you
only want to use certain criteria values belonging to a parameter group, for example, age ranges
IMG Path: Personnel Management Benefits Basic Se�ings Define Employee Groupings Define Employee Criteria Groups
Define Parameter Groups
Age Groups:
In this step, you define the age groups for the parameter groups that you defined in a previous step.
Depending on your needs, you may find for some parameter groups, you can leave out this step, if for example there is no requirement to
differentiate between employees based on age
IMG Path: Personnel Management Benefits Basic Se�ings Define Employee Groupings Define Employee Criteria Groups
Define Age Groups
Age Groups under Parameter grouping “PAR1”
Cost Groupings:
In the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further
differentiate between employees, based on other employee criteria, such as geographical location, job classification, marital status and so
on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying costs for
different groups of employees
IMG Path: Personnel Management Benefits Basic Se�ings Define Employee Groupings Define Cost Groupings
Coverage Groupings:
In the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further
differentiate between employees, based on other employee criteria, such as geographical location, employment contract, residence status
and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying coverage
for different groups of employees
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
3 of 16 27-12-2022, 20:04

4. IMG Path: Personnel Management Benefits Basic Se�ings Define Employee Groupings Define Coverage Groupings
Employee Contribution Groupings:
In the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further
differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so
on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee
contribution for different groups of employees
IMG Path: Personnel Management Benefits Basic Se�ings Define Employee Groupings Define Employee Contribution Groupings
the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate
between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set
up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for
different groups of employees
IMG Path: Personnel Management Benefits Basic Se�ings Define Employee Groupings Define Employer Contribution Groupings
the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate
between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set
up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for
different groups of employees
IMG Path: Personnel Management Benefits Plans Health Plans Define Employer Contribution Groupings
the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate
between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set
up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for
different groups of employees
IMG Path: Personnel Management Benefits Plans Health Plans Define Options for Health Plans
Dependent Coverage Options:
In this step, you define the dependent coverage that are used in health plans.
Define all possible variations that you need, because this view is not specific to any plan or plan option
IMG Path: Personnel Management Benefits Plans Health Plans Define Dependent Coverage Options
Number of Dependents:
In this step, you can restrict participation in a health plan under a dependent coverage option to certain types of dependent, as determined
by the subtypes of the Family/Related Persons infotype (0021). You can also define a minimum and maximum number of persons of a
particular type that can be covered. During enrollment, the system only includes those dependent coverage options in the benefit offer for
which the appropriate dependents are available
IMG Path: Personnel Management Benefits Plans Health Plans Define Minimum and Maximum Number of Dependents
Define Cost Variants:
In this step you define cost variants to determine which factors influence the cost of a health plan for an employee. Variants are plan-
specific; each plan has its own variant(s).
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
4 of 16 27-12-2022, 20:04

5. You do not enter any actual costs in this step. You simply define how costs vary according to:
• Plan
• Option
• Dependent coverage
• Employee data
Before you start to define cost variants, you need to do the following:
1. Determine how often costs vary for all the combinations of option and dependent coverage that you have defined in each plan.
This indicates how many cost variants you need. You can use the same cost variant more than once, for example, if costs are always
identical for the dependent coverages ’employee only’ and ’employee plus family’ within a plan, regardless of the plan option
2. Determine how costs vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and cost grouping to determine cost. You can also indicate whether the gender of
employees and whether or not they are smokers are cost criteria
IMG Path: Personnel Management Benefits Plans Health Plans Define Cost Variants
Cost Rules:
You need to define costs for each possible combination of employee grouping in the criteria you have a�ributed to each variant. If you
have not specified any criteria in a variant, you assign one rule only
IMG Path: Personnel Management Benefits Plans Health Plans Define Cost Rule
Health Plan A�ributes:
In this step, you bring together all the definitions relevant to the health plan that you have made in the previous steps.
You assign to each health plan:
• Its options
• Relevant dependent coverages
• The cost variants for the combination of options and dependent coverages
IMG Path: Personnel Management Benefits Plans Health Plans Assign Health Plan A�ributes
Insurance Plans:
In this step, you define general data for insurance plans
IMG Path: Personnel Management Benefits Plans Insurance Plans Define Insurance Plan General Data
Coverage Variants:
In this step, you define coverage variants to determined which factors influence the coverage an employee is entitled to in a plan. Variants
are plan-specific; each plan has its own variant(s).
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
5 of 16 27-12-2022, 20:04

6. You do not enter any actual coverage in this step. You simply define how coverage varies according to:
• Plan
• Coverage option
• Employee data
Before you start to define coverage variants, you need to do the following:
1. Determine how often coverage varies for different coverage options.
This indicates how many coverage variants you need. Note the following:
• If a plan has set coverages (including salary multiples), you need a
coverage variant for each.
• If a plan allows employees to choose any amount of coverage within a
range, you need only one coverage variant.
• If a plan has options, you will need a coverage variant for each option.
2. Determine how coverage varies according to employee data.
This determines how you need to set up your variants using employee groupings. For each variant, you can specify a parameter group
and coverage grouping to determine coverage
IMG Path: Personnel Management Benefits Plans Insurance Plans
Coverage Rules:
In this step, you define the actual coverages for a plan.
You need to define coverage for each possible combination of employee grouping in the criteria you have a�ributed to each variant. If you
have not specified any criteria in a variant, you assign one rule only.
Coverage can be defined as a flat amount or as a factor of salary
IMG Path: Personnel Management Benefits Plans Insurance Plans Define Coverage Rules
Cost Variants:
In this step you define cost variants to determine which factors influence the cost of an insurance plan for an employee. Variants are plan-
specific; each plan has its own variant(s).
You do not enter any actual costs in this step. You simply define how costs vary according to:
• Plan
• Coverage option
• Employee data
Before you start to define cost variants, you need to do the following:
1. Determine how often cost varies for different coverage options:
• If an insurance plan has set flat coverage options and flat costs, you need
to define a cost variant for each flat cost.
• If you have set flat coverage options and the flat costs are directly
proportional to the coverage stated in the flat cost, you need only one
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
6 of 16 27-12-2022, 20:04

7. cost variant.
• If an employee can choose any amount of coverage within a range and the
cost of the coverage is directly proportional to the coverage, you need
only one cost variant.
2. Determine how costs vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and cost grouping to determine cost. You can also indicate whether the gender of
employees and whether or not they are smokers are cost criteria
IMG Path: Personnel Management Benefits Plans Insurance Plans Define Cost Variants
Cost Rules:
You need to define costs for each possible combination of employee grouping in the criteria you have a�ributed to each variant. If you
have not specified any criteria in a variant, you assign one rule only
IMG Path: Personnel Management Benefits Plans Insurance Plans Define Cost Rules
Insurance Plan A�ributes:
In this step, you bring together all those parts of an insurance plan, that you have already defined in the previous few steps.
You define the insurance plan options, then associate to each insurance plan:
• Cost variant
• Coverage variant
IMG Path: Personnel Management Benefits Plans Insurance Plans Assign Insurance Plan A�ributes
Combined Coverage Limits:
When you define coverages for plans such as insurance, you can set limits on the coverage amount. This is often used when the coverage
is an amount dynamically calculated when the employee chooses her coverage.
However these limits apply only to one plan and yet you might need to define limits which combine the coverages of more than one plan.
In this chapter, you define these combined limits as follows:
1. The limit that might span 2 or more plans is reduced to a mathematical equation, where there is an amount on one side and plan
coverages on the other side. The two sides of this equation are then DIVIDED BETWEEN the two views in this chapter.
2. The first view defines the limit in monetary terms which is one side of the equation. It also defines the operator (equals, is greater than,
and so on).
3. The second view defines the other side of the equation in terms of the plan coverages
IMG Path: Personnel Management Benefits Plans Insurance Plans Combined Coverage Combined Coverage
Combined Coverage Limit Expressions:
In this step, you enter the second half of the equation, as discussed in combined coverage
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
7 of 16 27-12-2022, 20:04

8. IMG Path: Personnel Management Benefits Plans Insurance Plans Combined Coverage Define Combined Coverage Limit
Expressions
Imputed Income for Selected Benefits:
In this section of the IMG, you define the criteria needed to calculate Imputed Income.
Imputed Income is based upon benefits paid for by the employer and calculated using rates set by the Internal Revenue Service (IRS). This
value is then treated as taxable income for the employee
IMG Path: Personnel Management Benefits Plans Insurance Plans Combined Coverage Review Age Groups for Imputed
Income
Review Calculation Factors for Imputed Income:
In this step, you check that the Imputed Income Rate Table entries are correct.
The imputed income age groups are associated with the rates/factors set by the IRS
IMG Path: Personnel Management Benefits Plans Insurance Plans Combined Coverage Review Calculation Factors for
Imputed Income
Savings Plans:
In this step, you define general data for savings plans.
You have defined the relevant type, status, and provider for each plan in the Basic Se�ings section of the Benefits IMG
IMG Path: Personnel Management Benefits Plans Savings Plans Define Savings Plan General Data
Employee Contribution Variants:
In this step you define employee contribution variants to determine which factors influence the permi�ed employee contribution to a plan.
Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual contributions in this step. You simply define how contributions vary according to:
• Plan
• Option (only for plans in the plan category Miscellaneous)
• Employee data
Before you start to define variants, you need to do the following:
1. Determine how often employee contributions vary for plans and any plan options.
This indicates how many contribution variants you need.
2. Determine how employee contributions vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and employee contribution grouping to determine employee contribution
IMG Path: Personnel Management Benefits Plans Savings Plans Define Employee Contribution Variants
Employee Contribution Rules:
In this step, you define the employee contribution limits for each plan.
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
8 of 16 27-12-2022, 20:04

9. You need to define employee contributions limits for each possible combination of employee grouping in the criteria you have a�ributed
to each variant. If you have not specified any criteria in a variant, you assign one rule only.
You can define minimum and maximum employee contribution in the following ways:
• As a fixed amount
• As a percentage of salary
• As a contribution unit
In Payroll, the total employee contribution is the sum of these amounts
IMG Path: Personnel Management Benefits Plans Savings Plans Define Employee Contribution Rules
Employer Contribution Variants:
In this step you define employer contribution variants to determine which factors influence the contribution the employer makes to a plan.
Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual contribution in this step. You only define how contributions vary according to:
• Plan
• Option (only for plans in the plan category Miscellaneous)
• Employee data
Before you start to define variants, you need to do the following:
1. Determine how often employee contributions vary for plans and any plan options.
This indicates how many contribution variants you need.
2. Determine how employee contributions vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and employer contribution grouping to determine employer contribution
IMG Path: Personnel Management Benefits Plans Savings Plans Define Employer Contribution Variants
Employer Contribution Rules:
In this step, you define limits for the contributions made by the employer to employee plans. You so this for each employer contribution
variant for each plan.
You need to define employer contributions limits for each possible combination of employee grouping in the criteria you have a�ributed
to each variant. If you have not specified any criteria in a variant, you assign one rule only.
You can define the employer contribution and the contribution limit in either of the following ways:
• As a fixed amount / as an amount per unit contributed by the employee
• As a percentage of employee base salary or employee contribution
IMG Path: Personnel Management Benefits Plans Savings Plans Define Employer Contribution Rules
Assign Savings Plan A�ributes:
In this step, you complete the definition of savings plans by bringing together the relevant elements that you have already defined:
• EE contribution variant
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
9 of 16 27-12-2022, 20:04

10. • ER contribution variant
IMG Path: Personnel Management Benefits Plans Savings Plans Assign Savings Plan A�ributes
Flexible Spending Accounts (FSAs):
In this step, you define general data for flexible spending accounts (FSAs).
Requirements
You have created the appropriate plan type , plan status, and benefit provider in the preceding steps
IMG Path: Personnel Management Benefits Plans Flexible Spending Accounts (FSAs) Define Spending Account General Data
Assign Spending Account A�ributes:
In this step, you enter the details of your flexible spending accounts including contribution limits, an employer contribution variant (if
required), and rules for the reimbursement of claims
IMG Path: Personnel Management Benefits Plans Flexible Spending Accounts (FSAs) Assign Spending Account A�ributes
Flexible Administration:
In this chapter, you define the flexible aspects of your Benefits administration. You define the availability of plans to your employees, in
terms of the plans themselves. You also define aspects of the enrollment process.
you enter parameters that apply to processing within an entire benefits area, including:
• Open enrollment period dates
• Default validity dates for adjustment/standard plan records
• Advance availability of future plans
• Dependent age limits
IMG Path: Personnel Management Benefits Flexible Administration Define Administrative Parameters
Benefit Adjustment Groupings:
In this step, you define adjustment groupings. These groupings allow you to specify different adjustment permissions for different groups
of employees
IMG Path: Personnel Management Benefits Flexible Administration Benefits Adjustment Reasons Define Benefit Adjustment
Groupings
Benefit Adjustment Reasons:
In this step, you define adjustment reasons to control changes to employee enrollments according to company policy.
The adjustment reason types that you define here are assigned as subtypes of Adjustment Reasons records (infotype 0378) in HR Master
Data. Since a record can only have one subtype, a new record must be created for every adjustment reason an employee experiences.
According to the adjustment concept, an employee can only make changes to her enrollments if she has an Adjustment Reasons record
(infotype 0378) with the required adjustment reason as a subtype. The only exceptions to this are if changes are made during an open
enrollment period or if an anytime adjustment reason is assigned to the plan type.
In addition to defining adjustment reasons for certain events that can trigger changes, you may also want to define a special adjustment
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
10 of 16 27-12-2022, 20:04

11. reason to allow changes to plans at any time
IMG Path: Personnel Management Benefits Flexible Administration Benefits Adjustment Reasons Define Benefit Adjustment
Reasons
Adjustment Permissions:
In this section, you assign adjustment permissions to each benefit plan type for an adjustment reason and any adjustment grouping that
you have defined.
Note that the elements for which you can define permissions are automatically determined by the system, dependent on the plan category
Health Plans:
In this step, you define the changes permi�ed for all plans of this type. You do this for each combination of adjustment reason, adjustment
grouping, and plan type
IMG Path: Personnel Management Benefits Flexible Administration Benefits Adjustment Reasons Define Adjustment
Permissions Health Plans
this step, you define the changes permi�ed for all plans of this type. You do this for each combination of adjustment reason, adjustment
grouping, and plan type
IMG Path: Personnel Management Benefits Flexible Administration Benefits Adjustment Reasons Define Adjustment
Permissions Insurance Plans
Savings Plans:
In this step, you define the changes permi�ed for all plans of this type. You do this for each combination of adjustment reason, adjustment
grouping, and plan type
IMG Path: Personnel Management Benefits Flexible Administration Benefits Adjustment Reasons Define Adjustment
Permissions Savings Plans
Spending Accounts:
In this step, you define the changes permi�ed for all plans of this type. You do this for each combination of adjustment reason, adjustment
grouping, and plan type
IMG Path: Personnel Management Benefits Flexible Administration Benefits Adjustment Reasons Define Adjustment
Permissions Spending Account
Programs:
In this section of the IMG, you define benefit programs and the eligibility restrictions and termination conditions for the plans within these
programs.
Within a program, eligibility for plans can be determined on two levels:
• Program groupings control eligibility on a high level (macro-eligibility) by allocating an employee a defined program, depending on
his/her organizational and employment data.
• Eligibility rules are optional and control eligibility on a low level (micro-eligibility) by determining whether an employee can participate
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
11 of 16 27-12-2022, 20:04

12. in a plan within the relevant program. An employee must fulfill the conditions defined in the rule in order to be able to enroll. Eligibility
rules are assigned to plans in programs by means of an eligibility variant.
First Program Grouping:
In this step, you define first program groupings. Later, you define programs for a combination of first and second program groupings.
Identical a�ributes are available for the setup of both the first and second program groupings, and they are therefore interchangeable. The
fact that you determine macro-eligibility for a program using two dimensions means that you are able to make finer distinctions between
groups of employees
IMG Path: Personnel Management Benefits Flexible Administration Programs Define First Program Grouping
Second Program Grouping:
In this step, you define second program groupings. Later, you define programs for a combination of first and second program groupings.
Identical a�ributes are available for the setup of both the first and second program groupings, and they are therefore interchangeable. The
fact that you determine macro-eligibility for a program using two dimensions means that you are able to make finer distinctions between
groups of employees
IMG Path: Personnel Management Benefits Flexible Administration Programs Define Second Program Grouping
Employee Eligibility:
In this section of the IMG, you define the criteria according to which you control eligibility for individual benefit plans within a benefits
program (definition of micro-eligibility). You perform the following steps to set up eligiblity requirements:
• You define eligibility grouping to identify groups of employees for whom
certain eligibility criteria apply.
• You create eligibility variants, which you later use to link eligibility
rules to programs.
• If necessary, you define dynamic eligibility conditions relating
specifically to actual hours worked/length of service, or zip codes.
• You bring your definitions together in the eligibility rule, where you
can also specify further conditions for enrollment.
IMG Path: Personnel Management Benefits Flexible Administration Programs Employee Eligibility Define Eligibility
Groupings
Eligibility Variants:
In this step, you define eligibility variants. These consist simply of an identifier and a description
IMG Path: Personnel Management Benefits Flexible Administration Programs Employee Eligibility Define Eligibility Variants
Eligibility Rules:
In this step, you define eligibility rules for the benefit plans offered by your organization. You define these rules for combinations of
eligibility grouping and eligibility variant, thereby determining the eligibility conditions that will apply for different groups of employees
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
12 of 16 27-12-2022, 20:04

13. IMG Path: Personnel Management Benefits Flexible Administration Programs Employee Eligibility Define Eligibility Rules
Participation Termination:
In this section of the implementation guide you define criteria for the termination of benefit plans
Termination Groupings:
In this section of the implementation guide you define criteria for the termination of benefit plans
IMG Path: Personnel Management Benefits Flexible Administration Programs Participation Termination Define Termination
Groupings
Termination Variants:
In this step, you define termination variants. These consist simply of an identifier and a description
IMG Path: Personnel Management Benefits Flexible Administration Programs Participation Termination Define Termination
Variants
Termination Rules:
In this step, you define termination rules. You define these rules for every combination of termination grouping and termination variant,
thereby determining the coverage continuation periods and termination day that will apply for different groups of employees
IMG Path: Personnel Management Benefits Flexible Administration Programs Participation Termination Define Termination
Rules
Define Benefit Programs:
In this step, you define termination rules. You define these rules for every combination of termination grouping and termination variant,
thereby determining the coverage continuation periods and termination day that will apply for different groups of employees
IMG Path: Personnel Management Benefits Flexible Administration Programs Define Benefit Programs
Dependent/Beneficiary Eligibility:
In this step, you define family member groupings and determine how family members are allocated to these groupings
IMG Path: Personnel Management Benefits Flexible Administration Dependent/Beneficiary Eligibility Define Family Member
Groupings
Dependent Eligibility Rule Variants:
In this step, you define the dependent eligibility variants to which you want to assign dependent eligibility rules. You also specify whether
you wish to use a family member grouping in the associated eligibility rule to restrict eligibility to types of family members with certain
characteristics
IMG Path: Personnel Management Benefits Flexible Administration Dependent/Beneficiary Eligibility Define Dependent
Eligibility Rule Variants
Dependent Eligibility Rules:
In this step, you define dependent eligibility rules to determine which types of family member are eligible as dependents. You then assign
your rules to the appropriate plans by means of a rule variant in the step Assign Eligibility Rule Variant to Plan
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
13 of 16 27-12-2022, 20:04

14. IMG Path: Personnel Management Benefits Flexible Administration Dependent/Beneficiary Eligibility Define Dependent
Eligibility Rules
Beneficiary Eligibility Rule Variants:
In this step, you define the beneficiary eligibility variants to which you assign beneficiary eligibility rules in the next step. You also specify
the following:
• Whether you want to use a family member grouping in the associated eligibility rule to restrict eligibility to types of family members
with certain characteristics
• Whether the following apply for plans to which the variant is assigned:
The employee can be a beneficiary
Contingency beneficiaries can be named
Spouse approval is required if beneficiaries other than the spouse are to be amed (the system only takes this se�ing into consideration
for plans of the category avings)
IMG Path: Personnel Management Benefits Flexible Administration Dependent/Beneficiary Eligibility Define Beneficiary
Eligibility Rule Variants
Beneficiary Eligibility Rules:
In this step, you define beneficiary eligibility rules to determine which types of family member are eligible as beneficiaries. You then
assign your rules to the appropriate plans by means of a rule variant in the step Assign Eligibility Rule Variant to Plan
IMG Path: Personnel Management Benefits Flexible Administration Dependent/Beneficiary Eligibility Define Beneficiary
Eligibility Rules
Assign Eligibility Rule Variant to Plan:
In this step, you assign dependent eligibility variants and beneficiary eligibility variants to plans, thereby assigning the eligibility rules
associated with these variants
IMG Path: Personnel Management Benefits Flexible Administration Dependent/Beneficiary Eligibility Assign Eligibility Rule
Variant to Plan
COBRA Plans:
In this step, you specify which health plans that you have already defined in the system are COBRA-relevant.
When a clerk collects COBRA-qualified beneficiaries, the system only considers employee enrollments in the plans you select here as
legitimate cases where COBRA must be offered to the employee
IMG Path: Personnel Management Benefits COBRA Choose COBRA Plans
this step, you determine for which flexible spending accounts (FSAs) you will offer continuation of coverage under COBRA. You need to
do this for each benefit area separately
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
14 of 16 27-12-2022, 20:04

15. IMG Path: Personnel Management Benefits COBRA Choose COBRA Spending Accounts
Qualifying Event Coverage Periods:
In this step, you define the events that qualify individuals for COBRA coverage, and the periods of permi�ed coverage continuation for
each qualifying event type. COBRA legislation states the following regarding coverage continuation periods:
• In the case of Termination of employment and Reduction in working hours, only 18 months coverage must be provided. If qualified
beneficiaries are determined to be disabled within 60 days of the COBRA event, they are entitled to a further 11 months of coverage, as are
the other qualified beneficiaries who experienced the original event.
• For all other qualifying events except Bankruptcy of employer, a qualified beneficiary is entitled to 36 months continuation coverage,
and there is no extension provision for disability.
• In the case of the event Bankruptcy of employer, the coverage continuation period is the life of the retired employee or retired
employee’s widow/widower. You therefore do not need to define a continuation period in this case.
IMG Path: Personnel Management Benefits COBRA Define Qualifying Event Coverage Periods
Assign COBRA Events to Personnel Actions:
In this step, you define how the system recognizes COBRA-qualifying events from employee personnel actions (infotype 0000) records.
You do this by creating a link between the two.
The only COBRA-qualifying event types that you assign to personnel actions are:
• Termination
• Death of employee
• Reduction in hours
You need to assign these COBRA-qualifying event types since they are based on customizable entries in your HR master data and
therefore cannot be delivered as standard.
When the system collects COBRA-qualified beneficiaries, it considers employee records within the date range you specify in two stages as
follows:
1. The system searches for employee personnel action (infotype 0000) records. The COBRA qualifying events assigned to any personnel
actions found are collected.
2. The system checks other employee infotype records for specific information which corresponds to COBRA-qualifying event types
IMG Path: Personnel Management Benefits COBRA Assign COBRA Events to Personnel Actions
Notification and Payment Intervals:
In this step, you define details of COBRA administration for those states where state law concerning COBRA differs from federal law.
Federal regulations are reflected in the state se�ings for the District of Columbia, which is also the system default.
If you must comply with state regulations that differ from the federal regulations, you should create a new state entry. Otherwise, you can
use the DC version for all employees, regardless of which state they reside in
IMG Path: Personnel Management Benefits COBRA Define Notification and Payment Intervals
Benefits Configuration | SAP HR Collections https://saphrcompendium.wordpress.com/functional/benefits-management/benefits-configuration/
15 of 16 27-12-2022, 20:04