This document discusses special lubricants and noise damping products from BECHEM for the automotive industry. It describes BECHEM as a leading producer of high-quality special lubricants and metal working fluids. It then discusses their products for automotive applications, including greases, pastes, anti-friction coatings, and fluids. It highlights properties like friction reduction, durability, material compatibility, noise reduction, and environmental compatibility. It also provides tables listing specific BECHEM products for interior components, mechatronic systems, electrical contacts, and other automotive systems.
Rubber Products by Cl industrial spares-manufacturing-trading-companyISMAT
ISMAT was founded in 1981 by Ali Hussain Yakub in Sheffield, UK. It initially supplied industrial spares but has since evolved to become a tier 1 supplier of rubber and plastic components to various industries. The founder considers ISMAT not just a rubber or plastic manufacturer but an engineering company focused on innovation and developing new products to meet customer needs.
Customer Bulletin 0510 Polyisocyanurate vs Polyurethane InsulationJoe Hughes
This document compares polyisocyanurate (PIR) insulation to polyurethane (PUR) insulation. PIR has a higher index formulation which results in a cyclical ring structure that gives it advantages over PUR such as higher stability at high temperatures, better flame resistance without additional flame retardants, greater resistance to water and solvents, and improved dimensional stability. The document is intended to help customers better understand the differences between PIR and PUR insulation alternatives.
The document discusses new hybrid sealants and adhesives for construction applications that are based on low viscosity trimethoxy silane terminated polyether polymers. These polymers provide benefits of both silicone and polyurethane technologies, making flexible, adhesive sealants that cure without bubbles and have improved UV resistance compared to older products. The sealants and adhesives can bond various substrates like stone and wood, fill joints clearly, and allow for movement in buildings while resisting chemicals and staining.
RISUN Brochure-T Serial for Construction ApplicationSean Koo
The document discusses the use of Risun 30000T and R15000T silane terminated polyether polymers in construction applications such as sealants and adhesives. The polymers provide benefits over older technologies like polyurethane and silicone, forming "hybrid" materials with advantages of both. Risun polymers can be used to make flexible, elastic sealants for joints that allow movement without color change. They also enable bubble-free curing adhesives for wood flooring that provide strength and vibration resistance while allowing some wood movement. The polymers are designed for safety and can be manufactured using low-temperature processes.
Polyspray SA provides polyurea coating solutions and technical assistance to clients. Polyurea is a fast-curing coating derived from reacting a polyisocyanate with an amine resin. It provides excellent waterproofing, UV protection, adhesion, strength, and resistance to abrasion, chemicals, and heat. Polyurea is suitable for corrosion protection, pipe coatings, joint seals, tank linings, marine applications, roof coatings, manhole linings, and fuel containment due to its benefits of fast cure time, durability, chemical resistance, and cost effectiveness.
ArmorThane Pu 104 a polyurethane sealants, adhesives, and bindersct1054
SynUthane International is a consulting and contract research organization dedicated to the polyurethane industry. It was founded in 1998 by James M. O'Connor, who has over 30 years of experience in polyurethane R&D. SynUthane brings together experts to help companies find solutions to developments in polyurethanes and other technologies. It has consulted for and performed research for major chemical corporations involved in polyurethanes.
This document summarizes Perstorp's investments in new plasticizers. Perstorp is making its largest investment in history to produce two new plasticizers, EmolteneTM 100 and PevalenTM. EmolteneTM 100 is an established C10 plasticizer that provides durability for applications like cables and films. PevalenTM is an innovative polyolester plasticizer that is highly efficient while having low volatility, ensuring consistent properties. The new production capacity of 150,000 MT per year will strengthen Perstorp's platform and allow them to offer competitive and sustainable plasticizer products.
Rubber Products by Cl industrial spares-manufacturing-trading-companyISMAT
ISMAT was founded in 1981 by Ali Hussain Yakub in Sheffield, UK. It initially supplied industrial spares but has since evolved to become a tier 1 supplier of rubber and plastic components to various industries. The founder considers ISMAT not just a rubber or plastic manufacturer but an engineering company focused on innovation and developing new products to meet customer needs.
Customer Bulletin 0510 Polyisocyanurate vs Polyurethane InsulationJoe Hughes
This document compares polyisocyanurate (PIR) insulation to polyurethane (PUR) insulation. PIR has a higher index formulation which results in a cyclical ring structure that gives it advantages over PUR such as higher stability at high temperatures, better flame resistance without additional flame retardants, greater resistance to water and solvents, and improved dimensional stability. The document is intended to help customers better understand the differences between PIR and PUR insulation alternatives.
The document discusses new hybrid sealants and adhesives for construction applications that are based on low viscosity trimethoxy silane terminated polyether polymers. These polymers provide benefits of both silicone and polyurethane technologies, making flexible, adhesive sealants that cure without bubbles and have improved UV resistance compared to older products. The sealants and adhesives can bond various substrates like stone and wood, fill joints clearly, and allow for movement in buildings while resisting chemicals and staining.
RISUN Brochure-T Serial for Construction ApplicationSean Koo
The document discusses the use of Risun 30000T and R15000T silane terminated polyether polymers in construction applications such as sealants and adhesives. The polymers provide benefits over older technologies like polyurethane and silicone, forming "hybrid" materials with advantages of both. Risun polymers can be used to make flexible, elastic sealants for joints that allow movement without color change. They also enable bubble-free curing adhesives for wood flooring that provide strength and vibration resistance while allowing some wood movement. The polymers are designed for safety and can be manufactured using low-temperature processes.
Polyspray SA provides polyurea coating solutions and technical assistance to clients. Polyurea is a fast-curing coating derived from reacting a polyisocyanate with an amine resin. It provides excellent waterproofing, UV protection, adhesion, strength, and resistance to abrasion, chemicals, and heat. Polyurea is suitable for corrosion protection, pipe coatings, joint seals, tank linings, marine applications, roof coatings, manhole linings, and fuel containment due to its benefits of fast cure time, durability, chemical resistance, and cost effectiveness.
ArmorThane Pu 104 a polyurethane sealants, adhesives, and bindersct1054
SynUthane International is a consulting and contract research organization dedicated to the polyurethane industry. It was founded in 1998 by James M. O'Connor, who has over 30 years of experience in polyurethane R&D. SynUthane brings together experts to help companies find solutions to developments in polyurethanes and other technologies. It has consulted for and performed research for major chemical corporations involved in polyurethanes.
This document summarizes Perstorp's investments in new plasticizers. Perstorp is making its largest investment in history to produce two new plasticizers, EmolteneTM 100 and PevalenTM. EmolteneTM 100 is an established C10 plasticizer that provides durability for applications like cables and films. PevalenTM is an innovative polyolester plasticizer that is highly efficient while having low volatility, ensuring consistent properties. The new production capacity of 150,000 MT per year will strengthen Perstorp's platform and allow them to offer competitive and sustainable plasticizer products.
Deltech Advantage-Features and BenefitsRev3andrew cooper
Deltech Corporation is a global supplier of monomers and polymers that was formed through a series of acquisitions between 1989-2008. It has manufacturing sites in the US, UK, Brazil, China, and sales offices in Brazil and China. The company produces a variety of monomers including vinyl toluene, para-methylstyrene, and tert-butylstyrene. These monomers are used to make polymers and resins for applications such as coatings, adhesives, composites, and functional polymers. Deltech has advantages of multi-scale production, raw material sourcing, global presence, custom capabilities, and customer support.
The document discusses water-borne adhesive and coating technologies. It describes various water-borne adhesives and coatings that are eco-friendly, cost-effective alternatives to solvent-borne products. These include pressure sensitive adhesives, contact adhesives, release coatings, paper coatings, fabric coatings, and more. Formulation guidelines and application methods are provided for each type of product.
Barrier films protect packaged products from:
1) Moisture exchange which can cause drying out or absorption of moisture.
2) Oxygen permeation which can cause microbiological spoilage through oxidation.
3) Exchange of carbon dioxide and aroma compounds which can affect the protective gas environment or smell of the product.
Advantages of Pure Polyurea and Polyurethane Elastomeric Coatings in Corrosiv...Michelle Gunn
Presentation by Peter Morgan, Rhino Linings Australasia Managing Director on - what polyurethane is, the advantages of using it, including advice on how to select the right product for the required application for drinking water tank linings, industrial tank liners, thickener tanks, channel linings, ponds, dams and secondary containment applications. Prepared by Denis Baker, Rhino Linings Special Project Engineer
The document discusses a new polyamide 6 called Akulon XP that has improved processing behavior compared to standard PA6. It has enhanced shear thinning properties that provide a wider processing window when used in multilayer films. This allows improved interlayer stability and reduces issues like neck-in. Akulon XP also provides benefits for processes like thermoforming by allowing more even thickness distribution and higher levels of elongation. The enhanced rheology of Akulon XP makes it suitable for improving the efficiency of various plastic film and part manufacturing processes.
Role of EVOH in Barrier Flexible Packaging - October 2015Sachin Gangal
This document summarizes information about the use of ethylene vinyl alcohol copolymer (EVOH) in flexible packaging applications. It discusses Kuraray as the world's largest producer of EVOH, the properties and processing of EVOH, and various applications where EVOH is used as an oxygen and aroma barrier material, such as packaging for milk, sauces, bag-in-box wines, laminated tubes, snack foods, agricultural films, and hermetic storage bags. Emerging uses of EVOH include replacement of glass, metal, and aluminum foil in packaging through its barrier properties and ability to provide recyclable packaging structures.
The document discusses water borne adhesive technologies offered by Prathith Consultants. It describes formulations for pressure sensitive adhesives based on natural rubber latex, SBR latex, and acrylic polymers. It also covers bonding adhesives, release coatings, paper coatings, fabric coatings, and applications. Specific compounding guidelines and formulations are provided for various adhesive types as well as coating and application methods. End uses include tapes, laminates, packaging, and split leather manufacturing.
1) The document discusses pure polyurea coatings compared to hybrid polyurea/polyurethane and epoxy coatings.
2) Pure polyurea coatings have better properties like flexibility, chemical resistance, abrasion resistance, tensile strength and temperature resistance compared to hybrid and epoxy coatings.
3) Some key advantages of pure polyurea are that they are moisture insensitive, seamless, durable, and 100% solid which results in a coating with longer lifespan and better film quality than alternatives.
This document provides information on various types of o-rings including materials, temperature ranges, and applications. It discusses aflas o-rings which are made of a fluororubber and can withstand temperatures up to 550 degrees F. Buna o-rings, also called nitrile o-rings, are the most widely used as they are inexpensive and resist water, oil, and some fuels but not sunlight. EPDM o-rings offer resistance to steam and mild chemicals and are used in water systems, braking systems, and various industries. O-ring kits containing common sizes are available in nitrile, fluoroelastomer, and silicone materials.
Thermobreak is a leading thermal insulation made of physically crosslinked polyolefin foam. It has the lowest thermal conductivity of any flexible insulation at 0.032 W/mK. Thermobreak has been proven over 20 years with installations in over 600 projects worldwide. It is manufactured using Sekisui's proprietary technology and complies with various international standards for fire, smoke, and toxic gas emissions.
Zouch Converters is a UK-based company that produces self-adhesive products. They coat, convert, die-cut, and extrude materials like foam, rubber, film, and tape. Their products are used in construction, medical, automotive, and industrial applications for sealing, cushioning, mounting, insulation, and more. Zouch Converters is committed to environmental sustainability and compliance with regulations.
OptiMax is a thermoset polyurethane-modified roofing membrane that was developed using a unique process combining asphalt and polyurethane. This membrane provides enhanced performance characteristics such as increased weatherability, chemical resistance, and UV resistance compared to traditional modified membranes. OptiMax's specially designed polyurethane resin remains resilient over time, resulting in a roof membrane that provides greater longevity and reduces the overall cost of owning the roof system.
Butyl rubber is a synthetic rubber that is a copolymer of isobutylene and isoprene. It is produced via cationic copolymerization of 98% isobutylene and 2% isoprene using an initiator like Friedel-Craft acids at low temperatures between -90 to -100°C. Butyl rubber has excellent impermeability and flexibility due to its structure with long polyisobutylene segments separated by double bonds from the isoprene units. It has many desirable properties including low permeability, vibration damping, resistance to aging and weathering, fast cure rates, and being the best sealant of all known rubbers. These properties make butyl rubber useful in various applications
Valutazione LCA ed EPD del settore delle costruzioni. Sistemi costruttivi a ...AREA Science Park
This document discusses Fermacell, a manufacturer of drywall and building materials. It provides an overview of Fermacell's product lines, which include gypsum fiberboards, cement boards, flooring systems, and fire protection solutions. It also describes Fermacell's certification and environmental product declarations, highlighting the recycled content of its gypsum fiberboards and their low emissions profile. Sustainability is a key focus, with its greenline product line designed to purify indoor air quality.
This document describes a company that manufactures sealants, tapes, and related products using various machinery. It discusses the manufacturing processes for rubber compounding and adhesive mixing. The document outlines the machinery used to produce sealants, tapes, and laminates. It provides details on the product construction of sealants, tapes, and laminates. Finally, it lists essential properties of sealants and tapes and their applications.
This document summarizes polyurea, a high-performance polymer coating. [1] It provides rapid cure times, is flexible, waterproof, and has outstanding physical properties. [2] It can be applied through low or high-pressure spray methods. [3] Different formulations include aromatic, aliphatic, and hybrid types suited for various applications like infrastructure, transportation, flooring, and more.
RENOLIN UNISYN CLP is a line of fully-synthetic industrial gear lubricants based on polyalphaolefins. They are demulsifying oils with excellent load-carrying capacity, wear protection, and aging resistance. The oils are suitable for use in gearboxes and circulating systems with sump temperatures up to 90°C and can provide longer oil change intervals than mineral oils. They meet various industry specifications and are recommended for use in highly stressed bearings, joints, gears, and other applications where synthetic CLP oils are required.
This technical data sheet summarizes the properties and use of SPUR+ 1015LM, a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Key features include broad formulation latitude, excellent adhesion without primers, good durability indoors and outdoors, and high elastic recovery. Typical applications include building and construction sealants requiring good elastic recovery. The document provides details on the prepolymer's characteristics, recommended formulations, and test results demonstrating properties like adhesion and mechanical performance.
This document provides information on Poly-Optic 14-Series Casting Resins, which are two-part polyurethane systems formulated for applications requiring optical clarity. The resins produce clear or colored castings with fine detail reproduction. The document describes the various products in the line and provides details on their properties, applications, safety, and use instructions including mixing, curing, and mold preparation.
Concise know how from EMKA - Enclosure/Cabinet GasketingEMKA (UK) Ltd
This document provides information on various gasketing materials sold by EMKA, including EPDM, NBR, CR, PVC, TPE, PUR foam, and silicone. It describes the typical applications, temperature ranges, chemical resistance, and examples of profiles for each material. Additional sections cover topics like fire protection compounds, hygiene compounds, finishing of profiles, and pre-fabricated frames and rings.
This document summarizes the properties and applications of POLYLUB GLY 151, 501, and 801 lubricating greases. The greases are based on synthetic hydrocarbon oil, mineral oil, and special lithium soap. They are suitable for lubricating plastic components against metal or other plastic surfaces in applications like vehicles, gears, seals, and pneumatic equipment. The greases provide benefits such as approval by automotive manufacturers, contribution to noise reduction, and detection of lubricant with UV light.
This document describes BARRIERTA lubricants, which are high-quality, high-temperature lubricants based on perfluorinated polyether oil. BARRIERTA lubricants offer benefits such as excellent thermal stability, low evaporation rates, and compatibility with a wide range of plastics and elastomers. They are suitable for applications such as bearings, guides, electrical contacts, chains, and plastic-plastic friction points operating at extreme temperatures or in aggressive environments. The document provides information on product codes, properties, applications, and packaging of BARRIERTA's four viscosity grades.
Deltech Advantage-Features and BenefitsRev3andrew cooper
Deltech Corporation is a global supplier of monomers and polymers that was formed through a series of acquisitions between 1989-2008. It has manufacturing sites in the US, UK, Brazil, China, and sales offices in Brazil and China. The company produces a variety of monomers including vinyl toluene, para-methylstyrene, and tert-butylstyrene. These monomers are used to make polymers and resins for applications such as coatings, adhesives, composites, and functional polymers. Deltech has advantages of multi-scale production, raw material sourcing, global presence, custom capabilities, and customer support.
The document discusses water-borne adhesive and coating technologies. It describes various water-borne adhesives and coatings that are eco-friendly, cost-effective alternatives to solvent-borne products. These include pressure sensitive adhesives, contact adhesives, release coatings, paper coatings, fabric coatings, and more. Formulation guidelines and application methods are provided for each type of product.
Barrier films protect packaged products from:
1) Moisture exchange which can cause drying out or absorption of moisture.
2) Oxygen permeation which can cause microbiological spoilage through oxidation.
3) Exchange of carbon dioxide and aroma compounds which can affect the protective gas environment or smell of the product.
Advantages of Pure Polyurea and Polyurethane Elastomeric Coatings in Corrosiv...Michelle Gunn
Presentation by Peter Morgan, Rhino Linings Australasia Managing Director on - what polyurethane is, the advantages of using it, including advice on how to select the right product for the required application for drinking water tank linings, industrial tank liners, thickener tanks, channel linings, ponds, dams and secondary containment applications. Prepared by Denis Baker, Rhino Linings Special Project Engineer
The document discusses a new polyamide 6 called Akulon XP that has improved processing behavior compared to standard PA6. It has enhanced shear thinning properties that provide a wider processing window when used in multilayer films. This allows improved interlayer stability and reduces issues like neck-in. Akulon XP also provides benefits for processes like thermoforming by allowing more even thickness distribution and higher levels of elongation. The enhanced rheology of Akulon XP makes it suitable for improving the efficiency of various plastic film and part manufacturing processes.
Role of EVOH in Barrier Flexible Packaging - October 2015Sachin Gangal
This document summarizes information about the use of ethylene vinyl alcohol copolymer (EVOH) in flexible packaging applications. It discusses Kuraray as the world's largest producer of EVOH, the properties and processing of EVOH, and various applications where EVOH is used as an oxygen and aroma barrier material, such as packaging for milk, sauces, bag-in-box wines, laminated tubes, snack foods, agricultural films, and hermetic storage bags. Emerging uses of EVOH include replacement of glass, metal, and aluminum foil in packaging through its barrier properties and ability to provide recyclable packaging structures.
The document discusses water borne adhesive technologies offered by Prathith Consultants. It describes formulations for pressure sensitive adhesives based on natural rubber latex, SBR latex, and acrylic polymers. It also covers bonding adhesives, release coatings, paper coatings, fabric coatings, and applications. Specific compounding guidelines and formulations are provided for various adhesive types as well as coating and application methods. End uses include tapes, laminates, packaging, and split leather manufacturing.
1) The document discusses pure polyurea coatings compared to hybrid polyurea/polyurethane and epoxy coatings.
2) Pure polyurea coatings have better properties like flexibility, chemical resistance, abrasion resistance, tensile strength and temperature resistance compared to hybrid and epoxy coatings.
3) Some key advantages of pure polyurea are that they are moisture insensitive, seamless, durable, and 100% solid which results in a coating with longer lifespan and better film quality than alternatives.
This document provides information on various types of o-rings including materials, temperature ranges, and applications. It discusses aflas o-rings which are made of a fluororubber and can withstand temperatures up to 550 degrees F. Buna o-rings, also called nitrile o-rings, are the most widely used as they are inexpensive and resist water, oil, and some fuels but not sunlight. EPDM o-rings offer resistance to steam and mild chemicals and are used in water systems, braking systems, and various industries. O-ring kits containing common sizes are available in nitrile, fluoroelastomer, and silicone materials.
Thermobreak is a leading thermal insulation made of physically crosslinked polyolefin foam. It has the lowest thermal conductivity of any flexible insulation at 0.032 W/mK. Thermobreak has been proven over 20 years with installations in over 600 projects worldwide. It is manufactured using Sekisui's proprietary technology and complies with various international standards for fire, smoke, and toxic gas emissions.
Zouch Converters is a UK-based company that produces self-adhesive products. They coat, convert, die-cut, and extrude materials like foam, rubber, film, and tape. Their products are used in construction, medical, automotive, and industrial applications for sealing, cushioning, mounting, insulation, and more. Zouch Converters is committed to environmental sustainability and compliance with regulations.
OptiMax is a thermoset polyurethane-modified roofing membrane that was developed using a unique process combining asphalt and polyurethane. This membrane provides enhanced performance characteristics such as increased weatherability, chemical resistance, and UV resistance compared to traditional modified membranes. OptiMax's specially designed polyurethane resin remains resilient over time, resulting in a roof membrane that provides greater longevity and reduces the overall cost of owning the roof system.
Butyl rubber is a synthetic rubber that is a copolymer of isobutylene and isoprene. It is produced via cationic copolymerization of 98% isobutylene and 2% isoprene using an initiator like Friedel-Craft acids at low temperatures between -90 to -100°C. Butyl rubber has excellent impermeability and flexibility due to its structure with long polyisobutylene segments separated by double bonds from the isoprene units. It has many desirable properties including low permeability, vibration damping, resistance to aging and weathering, fast cure rates, and being the best sealant of all known rubbers. These properties make butyl rubber useful in various applications
Valutazione LCA ed EPD del settore delle costruzioni. Sistemi costruttivi a ...AREA Science Park
This document discusses Fermacell, a manufacturer of drywall and building materials. It provides an overview of Fermacell's product lines, which include gypsum fiberboards, cement boards, flooring systems, and fire protection solutions. It also describes Fermacell's certification and environmental product declarations, highlighting the recycled content of its gypsum fiberboards and their low emissions profile. Sustainability is a key focus, with its greenline product line designed to purify indoor air quality.
This document describes a company that manufactures sealants, tapes, and related products using various machinery. It discusses the manufacturing processes for rubber compounding and adhesive mixing. The document outlines the machinery used to produce sealants, tapes, and laminates. It provides details on the product construction of sealants, tapes, and laminates. Finally, it lists essential properties of sealants and tapes and their applications.
This document summarizes polyurea, a high-performance polymer coating. [1] It provides rapid cure times, is flexible, waterproof, and has outstanding physical properties. [2] It can be applied through low or high-pressure spray methods. [3] Different formulations include aromatic, aliphatic, and hybrid types suited for various applications like infrastructure, transportation, flooring, and more.
RENOLIN UNISYN CLP is a line of fully-synthetic industrial gear lubricants based on polyalphaolefins. They are demulsifying oils with excellent load-carrying capacity, wear protection, and aging resistance. The oils are suitable for use in gearboxes and circulating systems with sump temperatures up to 90°C and can provide longer oil change intervals than mineral oils. They meet various industry specifications and are recommended for use in highly stressed bearings, joints, gears, and other applications where synthetic CLP oils are required.
This technical data sheet summarizes the properties and use of SPUR+ 1015LM, a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Key features include broad formulation latitude, excellent adhesion without primers, good durability indoors and outdoors, and high elastic recovery. Typical applications include building and construction sealants requiring good elastic recovery. The document provides details on the prepolymer's characteristics, recommended formulations, and test results demonstrating properties like adhesion and mechanical performance.
This document provides information on Poly-Optic 14-Series Casting Resins, which are two-part polyurethane systems formulated for applications requiring optical clarity. The resins produce clear or colored castings with fine detail reproduction. The document describes the various products in the line and provides details on their properties, applications, safety, and use instructions including mixing, curing, and mold preparation.
Concise know how from EMKA - Enclosure/Cabinet GasketingEMKA (UK) Ltd
This document provides information on various gasketing materials sold by EMKA, including EPDM, NBR, CR, PVC, TPE, PUR foam, and silicone. It describes the typical applications, temperature ranges, chemical resistance, and examples of profiles for each material. Additional sections cover topics like fire protection compounds, hygiene compounds, finishing of profiles, and pre-fabricated frames and rings.
This document summarizes the properties and applications of POLYLUB GLY 151, 501, and 801 lubricating greases. The greases are based on synthetic hydrocarbon oil, mineral oil, and special lithium soap. They are suitable for lubricating plastic components against metal or other plastic surfaces in applications like vehicles, gears, seals, and pneumatic equipment. The greases provide benefits such as approval by automotive manufacturers, contribution to noise reduction, and detection of lubricant with UV light.
This document describes BARRIERTA lubricants, which are high-quality, high-temperature lubricants based on perfluorinated polyether oil. BARRIERTA lubricants offer benefits such as excellent thermal stability, low evaporation rates, and compatibility with a wide range of plastics and elastomers. They are suitable for applications such as bearings, guides, electrical contacts, chains, and plastic-plastic friction points operating at extreme temperatures or in aggressive environments. The document provides information on product codes, properties, applications, and packaging of BARRIERTA's four viscosity grades.
This document describes BARRIERTA lubricants, which are high-quality, high-temperature lubricants based on perfluorinated polyether oil. BARRIERTA lubricants offer benefits such as excellent thermal stability, low evaporation rates, and compatibility with a wide range of plastics and elastomers. They are suitable for applications such as bearings, guides, electrical contacts, chains, and plastic-plastic friction points operating at extreme temperatures or in aggressive environments. The document provides information on product codes, properties, applications, and packaging of BARRIERTA lubricants.
Reinste Nano Ventures produces industrial-grade nanosilver and nanomaterial products for antibacterial and antimicrobial applications. Their product range includes liquid nanosilver, nanosilver masterbatches for polymers, fibers and yarns, fire protective and heat insulating coatings, self-healing coatings, abrasion resistant coatings, anticorrosion coatings, coating additives, thermal spray coatings, heat transfer fluids, engine oil additives containing nanodiamonds, and nano precipitated calcium carbonate for use as a filler in plastics, rubbers, sealants and other materials. Their products are designed to provide properties like increased durability, heat resistance, corrosion protection and
Reinste Nano Ventures produces industrial-grade nanosilver and nanomaterial products for antibacterial and antimicrobial applications. Their product range includes liquid nanosilver, nanosilver masterbatches for polymers, fibers and yarns, and various protective and heat-resistant coatings made with nanomaterials. Some of their coating products provide fire protection, corrosion resistance, abrasion resistance, self-healing properties, and UV protection. They also offer heat transfer fluids and engine oil additives containing nanodiamonds or nanoparticles to improve performance.
Viton (FKM or FPM) is suitable for applications involving mineral acids, salt solutions, and chlorinated hydrocarbons with a temperature range of -20°F to +300°F. Buna-N (Hycar or Nitrile) has good resistance to oil, water, solvents and hydraulic fluids with a maximum temperature of +225°F. Hypalon has good resistance to oxidation, ozone and flame with improved acid resistance compared to neoprene and a temperature range of 0°F to +220°F. Neoprene is recommended for pulp and paper applications with a temperature range of -20°F to +180°F.
Klübersynth HLR 46-371 is a high-temperature resistant lubricating grease for elastomer/metal combinations that are sensitive to mineral oil. It has a service temperature range of -40 to 150°C and is compatible with elastomers like EPDM and NBR as well as plastics. Testing showed the grease caused minimal changes in properties of elastomer samples over 168 hours at 100-150°C. The grease provides corrosion protection, water resistance, and oxidation stability and can be used in automotive components like brakes.
The document discusses industrial protective coatings from ArmorThane that are suitable for tough industrial applications. It describes how ArmorThane supplies polyurethane and polyurea coatings for secondary containment, primary containment, oil and gas berms and applications, mining applications, industrial flooring, sewer/waste applications, and protecting equipment and vehicles. The coatings provide corrosion and chemical resistance while being flexible and durable.
The document discusses industrial protective coatings from ArmorThane that are suitable for tough industrial applications. It describes how ArmorThane supplies polyurethane and polyurea coatings for secondary containment, primary containment, oil and gas berms and applications, mining applications, industrial flooring, sewer/waste applications, and protecting equipment and vehicles. The coatings provide corrosion and chemical resistance while extending the life of industrial equipment and structures.
The document discusses industrial protective coatings from ArmorThane that are suitable for tough industrial applications. It describes how ArmorThane supplies polyurethane and polyurea coatings for secondary containment, primary containment, oil and gas berms, mining equipment, industrial flooring, sewer/waste applications, and safety surfaces. The coatings provide corrosion and chemical resistance while extending the life of equipment and structures.
BECHEM SA is a leading manufacturer of high-quality special lubricants and metal working fluids. They offer a wide range of lubrication solutions including greases, oils, pastes, sprays, and process media. BECHEM prides itself on its technical expertise, customer support network, and ability to develop tailored solutions. It has production sites worldwide and distributors across Africa and globally to ensure products are readily available.
Kl bertop TP 46-111 is a water-miscible, thermosetting bonded coating based on PTFE and an organic binder. It provides benefits such as a lubricating effect, lifetime resistance to wear under low to medium loads, and excellent corrosion protection on phosphated surfaces. The document describes the product's composition, applications, and application methods, and provides detailed test results on its properties including friction coefficient, corrosion and chemical resistance.
ArmorThane - Advances In Polyurea Technologyct1054
This document discusses advances in polyurethane and polyurea coatings. It describes the different types of polyurethane and polyurea coatings, their properties, surface preparation requirements, application equipment, and common applications. Key points covered include the chemistry and differences between polyurethanes, polyureas, and hybrid coatings, as well as performance standards and examples of coating systems for concrete, steel, pipes, and tanks.
Elastoster is a manufacturer of range of silicon rubber o rings, silicon rubber gaskets, door gaskets and high temperature rubber tubing at best price.
This document provides information on Blue Barrel Supply B.V., a distributor of valve lubricants, sealants, and packings manufactured by Desco and ThredOn. It lists over 50 lubricant and sealing products along with their description, temperature range, and other details. Blue Barrel Supply supplies efficient and cost-effective maintenance products for various industries including oil and gas exploration, pipelines, refining, and chemicals. The document also provides information on product packaging options including small and large stick lubricants available in various standard sizes.
BASF provides concise summaries of 3 sentences or less:
BASF is a global leader in plastic additives and offers a wide range of products to protect packaging from UV light and visible light degradation. Their portfolio includes light stabilizers, antioxidants, effect pigments and dyes, and other additives that can improve the durability and quality of packaged goods. BASF works closely with customers in the packaging industry to develop innovative and customized solutions that meet performance and regulatory requirements.
This document provides an overview of Pidilite Industries Ltd's adhesive product range for various industries. It discusses their FV Adhesive-II range which covers products for upholstery, flooring, footwear, and HVAC applications. It then summarizes specific adhesive products for upholstery, flooring, wallpaper, footwear, and insulation applications. For each segment, it highlights the available packaging and key features and benefits of flagship products.
This document provides an overview and comparison of ArmorThane's polyurethane and polyurea coating products. It discusses the various products available for high pressure spraying, low pressure spraying, roll-on application, and other specialized uses. Physical properties are compared for the different polyurethane and polyurea products. The document is intended to help customers choose the right industrial coating product for their application needs.
This document provides an overview and comparison of ArmorThane's polyurethane and polyurea coating products. It discusses the various products available for high pressure spraying, low pressure spraying, roll-on application, and other specialized uses. Physical properties are compared for the different polyurethane and polyurea products. The document is intended to help customers choose the right industrial coating product for their application needs.
Similar to BECHEM_Special_lubricants_noise_damping_products_automotive_industry_en_01 (20)
2. 02 03
Special lubricants and
noise damping products
for the automotive industry
Low temperatures
High loads
UV tracer
Good pumpability
ATTRIBUTES
Compatible with plastics
High temperatures
Noise damping
Resistant to water
Available in aerosols
Corrosion protection
Roller bearings
APPLICATIONS
Plain bearings
Electrical contacts
Thread lubrication
04 Development partner for the automotive industry
06 Interior components
08 Mechatronic systems
10 Electrical contacts
12 Chassis and brake systems
14 Seating and belt systems
16 Locking systems and hinges
18 Anti-friction coatings
20 Perfluoropolyether (PFPE) products
22 Noise damping
23 Elastomer and plastic compatibility
Contents
BECHEM – Lubrication solutions for industry
As the oldest German manufacturer of industrial lubricants,
BECHEM today is one of the leading producers of high-
quality special lubricants and metal working fluids.
BECHEM products convince by innovative formulations in
the most diverse of industrial applications – in machining
and forming metal working processes, in coating technology
and as for-life lubricants in various technical components.
A strong network of distributors and several national and
international production sites ensure that BECHEM products
are readily available worldwide.
Tomorrow’s technologies. Today.
All indications and values correspond to latest know-
ledge and do not represent any product specification
3. 04 05
• Reduction of friction and wear
• Durability and functional reliability
• Material compatibility
• Noise reduction
• Environmental compatibility
• Wide service temperature range
• Corrosion protection
Lubrication solutions for
demanding requirements
»What drives the automotive industry
is change and development.«
Development partner for
the automotive industry
The essential basis for innovative automotive lubricants is
intense research and development work as well as modern
testing equipment. In BECHEM’s laboratories the latest phy-
sicochemical testing and analytical systems are available
to characterise lubricants, control their application, analyse
customer-specific problems and finally to develop the appro-
priate lubricant solutions. The testing of lubricants on model
systems, original components and materials and the simu-
lation of different vehicle-related conditions in the BECHEM
laboratories help shorten product development times for our
customers.
In cooperation with our customers and partners various test
systems have been developed in research projects over the
past few years. Involving our customers in the development
of lubricants is also an essential part of our future problem
solving.
Effective partners support us and thus our customers in
the development of cross-system concepts. In addition to
cooperating with universities and academies, BECHEM has
excellent contacts with industry partners in the dosing and
feeding technology, measurement and control technology,
process and coating technology.
BECHEM’s strategy is to offer automobile customers a
global partnership in the fields of lubricant development
and production to ensure that these are always tailored
to the latest requirements.
Constant velocity joint test rig Tensile strength test Stick-Slip test rig in climate chamber
Translatory oscillation test rig (SRV) Torque test rig Hardness test of polymer materials
4. 06 07
PRODUCT
Berulub FR 16 Polyalpha-
olefin
(PAO)
Special
lithium
soap
2 32
6
-50 +140 Cup holder, ash-tray, kinematic
components, sun-shades
Suitable for the material combinations plastic/plastic and plastic/steel,
excellent low temperature behaviour, resistant to water and oxidation,
prevents stick-slip, contains PTFE
Berulub FR 43 Polyalpha-
olefin
(PAO)
Special
lithium
soap
2 32
6
-50 +140 HVAC, glove box compartment,
center console, window runner
Suitable for material combinations plastic/plastic and plastic/steel,
excellent low temperature behaviour, resistant to water and oxidation,
prevents stick-slip, contains PTFE, available with UV tracer
Berusoft 15 Polyalpha-
olefin
(PAO)
Polyurea 1 - 2 900
100
-40 +150 Climate control, glove box, arm rest,
GPS controller
Special grease for noise damping, excellent compatibility with elastomers,
good resistance to oxidation, low oil separation, prevents stick-slip
Berulub FH 57 Polyalpha-
olefin
(PAO)
Polyurea 1 - 2* 150
20
-40 +160 Air condition console, gear shift
mechanism
Fully synthetic grease for long-life lubrication of polymer components,
excellent noise damping properties, excellent low temperature behaviour,
contains PTFE
Berulub XP 3000 Polyalpha-
olefin
(PAO)
Gel 1 - 2 2400
180
-40 +140 Center arm rest, arm rest closure,
gear selection cover, folding table
Good plastic and elastomer compatibility, high adhesion, good low
temperature properties, very low oil separation, excellent protection
against corrosion, excellent noise damping
Beruplex LG 21 F Polyglycol Lithium
complex
soap
1 - 2 390
66
-40 +145 Sun roof, convertible roof top systems Synthetic special lubricant for brake systems, wide temperature range,
resistant to corrosion and oxidation, EP additives, good adhesion,
water resistant, inert against EPDM
Beruglide L Perfluoro-
polyether
(PFPE)
Polytetraflu-
oroethylene
(PTFE)
1 - 2* 160
16
-40 +190 Anti-squeak applications, convertible top
gear
Good noise damping properties, excellent compatibility with plastics
and elastomer materials, good fogging behaviour, excellent oxidation
resistance
Berusil TS 1 Special
silicone oil
Polytetraflu-
oroethylene
(PTFE)
1 - 2* 3500
1500
-50 +180 Flap mechanism for HVAC-Systems,
kinematic construction parts
Noise damping silicone lubricant for long-life lubrication, good plastic
and elastomer compatibility, wide temperature range, water resistant,
prevents stick-slip
Berucoat AK 978 Org. binder - - - -40 +80 Anti-squeak applications, door modules,
covers, arm rest closure
Water based interior AF-coating, prevents stick-slip and disturbing noises,
transparent, free of formaldehyde, UV tracer
Berucoat AK 376 Org. binder - - - -40 +120 Anti-squeak applications Long-life lubrication for plastic and/or steel material combinations, no
dust adsorption, prevents stick-slip, good protection against corrosion
Berucoat AF 320 E Org. binder - - - -70 +250 Sun visor, convertible top guide way,
cigarette lighter
Suitable for plastic/steel combinations, long-life coating, prevents
stick-slip, no dust adsorption, excellent protection against corrosion,
oil resistant, curing temperature +120 °C
Berulub ND-Fluid 160 Perfluoro-
polyether
(PFPE)
- - 160
16
-40 +200 Kinematic components, cup holder,
air vents, anti-squeak applications
Noise damping fluid, excellent material compatibility (polymers,
elastomers, non-ferrous metals, leather), high thermal stability and
oxidation resistance
Base
oil / base
Thickener
NLG
I-grade
Base
oil viscosity
[m
m
²/s] at 40
°C / 100
°C
Service
tem
perature
range
[°C]
Applications
Noise
dam
ping
Attributes
LubricatingGreases / PastesAnti-frictioncoatingsFluid
*Value indicates unworked penetration
noise damping good noise damping very good noise damping
Interior components
With targeted vibration damping and optimisation of friction
values, BECHEM lubricants allow controlled reproducible
movements in all interior components such as cup holders, arm
rests, door trims, consoles, control and switching systems.
BECHEM products therefore make a major contribution to the
functionality and haptics of interior components and upgrade
the relevant parts and vehicles. Products, which are specifically
designed for noise reduction, significantly improve driving
comfort.
Approvals / references
(in alphabetical order)
• Brose group 55.1
• Brose group 53.2
• Daimler DBL 6827.42
• Fiat Specification 9.55580 Gras V
• Ford WSD-M1C 234 A2
• GM W16531-Type 4
• GM W16531-Type 5
• GM 9986248
• VW-TL 778 A
• VW-TL 778 B
• VW-TL 52150
5. 08 09
PRODUCT
Berulub FR 16 Polyalpha-
olefin
(PAO)
Special
lithium
soap
2 32
6
-50 +140 Low torque, small gears, low noise
damping
Suitable for the material combinations plastic/plastic and plastic/steel,
excellent low temperature behaviour, resistant to water and oxidation,
prevents stick-slip, contains PTFE
Berulub FR 43 Polyalpha-
olefin
(PAO)
Special
lithium
soap
2 32
6
-50 +140 Medium torque, medium noise damping Suitable for material combinations plastic/plastic and plastic/steel,
excellent low temperature behaviour, resistant to water and oxidation,
prevents stick-slip, contains PTFE, available with UV tracer
Berusoft 10 Polyalpha-
olefin
(PAO)
Special
lithium
soap
2 600
70
-40 +150 High torque, high noise damping Special grease for noise damping, excellent compatibility with plastic
and elastomers, good resistance to oxidation, low oil separation,
prevents stick-slip
Berulub FG-H 2 SL Polyalpha-
olefin
(PAO)
Special
calcium com-
plex soap
2 50
8
-45 +160
+200
Low torque, small gears High-performance lubricant with good adhesion and sealing qualities,
resistant to water and ageing, reliable protection against corrosion
BECHEM Ceritol PK 1
Soft
Polyalpha-
olefin
(PAO)
Polyurea 0 - 1 32
6
-60 +140 Low torque, small gears, low noise
damping
Special lubricant for metal and polymer materials, excellent low temperature
behaviour, protection against corrosion, resistant to oxidation, contains
EP-additives, prevents stick-slip
Berulub FH 57 Polyalpha-
olefin
(PAO)
Polyurea 1 - 2* 150
20
-40 +160 Medium torque, medium noise damping Fully synthetic grease for long-life lubrication of polymer components,
excellent noise damping properties, excellent low temperature behaviour,
contains PTFE
Berulub PMP 75 Polyalpha-
olefin
(PAO)
Polytetraflu-
oroethylene
(PTFE)
1 - 2 75
12
-50 +140 Low torque, small gears, medium noise
damping
Fully synthetic grease for material combinations non-ferrous metal/metal/
plastic, plastic/plastic, excellent low temperature behaviour, high surface
pressure, noise damping, contains PTFE, UV tracer
Beruglide H 50 Synthetic oil
combination
Special
lithium
soap/PTFE
2 30
6
-60 +160 Low torque, small gears, high noise
damping
Long-life lubrication for plastic/plastic, plastic/metal and non-ferrous
metal/non-ferrous metal, excellent low temperature behaviour, noise
damping, resistant to water, PTFE, UV tracer, hybrid technology
Berulub FK 164-2 UV Perfluoro-
polyether
(PFPE)
Polytetraflu-
oroethylene
(PTFE)
2 150
45
-60 +250 Low torque, small gears, high noise
damping
Lubricating paste for gold and silver plated sliding/plug-in contacts,
excellent plastics/elastomer compatibility, excellent low temperature
behaviour
Beruplex LO 10 Polyalpha-
olefin
(PAO)
Lithium-
complex
soap
0 - 1 48
8
-50 +140 Low torque, small gears Fully synthetic multipurpose grease for long-life lubrication of plastic/plastic,
plastic/metal and steel/steel, excellent low-temperature behaviour, noise dam-
ping, resistant to oxidation, water resistant, corrosion protection, UV-tracer
Beruplex LO 21 Polyalpha-
olefin
(PAO)
Lithium-
complex
soap
1 - 2 48
8
-50 +140 Low torque, small gears Fully synthetic multipurpose grease for long-life lubrication of plastic/plastic,
plastic/metal, excellent low-temperature behaviour, noise damping, resistant
to oxidation, water resistant, corrosion protection, UV-tracer
Base
oil
Thickener
NLG
I-grade
Base
oil viscosity
[m
m
²/s] at 40
°C / 100
°C
Service
tem
perature
range
[°C] 1)
Applications
Noise
dam
ping
Attributes
LubricatingGreases / Pastes
*Value indicates unworked penetration 1)
Value marked in grey indicates short term maximum temperature
noise damping good noise damping very good noise damping
Mechatronic systems
Approvals / references
(in alphabetical order)
BECHEM provides a wide product range for a whole variety
of manually and electrically operated actuators and control
gears in the vehicle interior and body. These are characte-
rised by their high wear resistance, excellent noise reduction
properties and high functional reliability under the harshest
climatic conditions worldwide. High levels of compatibility
with various materials and the lowest starting torques at very
low temperatures complete the range of benefits.
• Brose group 53.2, Brose group 55.1
• Daimler DBL 6827.42
• Delphi Automotive
• Fiat Specification 9.55580 Gras V
• Ford WSD-M1C 234 A2
• GM 9986237, GM 9986248
• Kiekert AG
• Kostal
• Valeo
• VW-TL 778 A, VW-TL 778 B
6. 10 11
LeopoldKostalGmbH&Co.KG
LeopoldKostalGmbH&Co.KG
PRODUCT
Berulub FK 125 Polyalpha-
olefin
(PAO)
Special
lithium soap
1 - 2 20
4
-50 +120 Finger sliding systems, lubrication and
protection of sliding contact systems
Lubrication and contact protection, improved electrical contact, contact protection
against atmospheric influences, water resistant, UV-tracer, very good low-tempe-
rature behaviour
Berulub FK 202 Polyalpha-
olefin
(PAO)
Lithium-
calcium
soap
2 18
4
-50 +120 Finger sliding systems, lubrication and
protection of sliding contact systems
Lubrication and contact protection, improved electrical contact, contact protection
against atmospheric influences, water resistant, UV-tracer, very good low-tempe-
rature behaviour
Berulub KR-EL 2 Ester Lithium
soap
2 13
4
-50 +120 Ignition switch, electrical connector,
wiper motor
Long-life lubricating grease and contact protection, forms a protective layer on
copper/silver plated materials, excellent low temperature behaviour, prevents
formation of impurity layers, available with UV tracer
Berulub FK 97 E Ester Polyurea 1* 78
12
-40 +150 Currents from 0,25 A to 15 A Lubrication and protection against corrosion of lifting and sliding contacts,
for materials of copper and silver
Berulub FK 122 Ester Polyurea 0* 78
11
-50 +150 Currents from 5 mA to 10 A Lubrication and contact protection, improved contact making, neutral towards
polymer materials, resistant to water, suitable for low temperatures, available with
UV tracer
Berulub FK 164-2 UV Perfluoro-
polyether
(PFPE)
Polytetraflu-
oroethylene
(PTFE)
2 150
45
-60 +250 Currents from 10 mA to 30 A Lubricating paste for gold and silver plated sliding/plug-in contacts, excellent
plastics/elastomer compatibility, excellent low temperature behaviour
Berulub FK 164
Dispersion OZF 1-10
Perfluoro-
polyether
(PFPE)
- - 150
45
-60 +230 Currents from 1 mA to 500 mA Contact protection, a very thin lubricating film with very low contact resistance is
formed after evaporation of the solvent, suitable for contact partners of silver and
gold
Berutox VPT 64
Dispersion OZF 0,5-20
Perfluoro-
polyether
(PFPE)
- - 325
30
-40 +250 Currents from 1 mA to 500 mA Contact protection, a very thin lubricating film with very low contact resistance is
formed after evaporation of the solvent, suitable for contact partners of silver and
gold
Base
oil
Thickener
NLG
I-grade
Base
oil viscosity
[m
m
²/s] at 40
°C / 100
°C
Service
tem
perature
range
[°C]
Applications
Attributes
LubricatingGreases / Pastes
*Value indicates unworked penetration
Dispersions
Electrical contacts
• Bosch
• BJA
• Delphi Automotive
• HELAG
• Kostal
• SAIA-Burgess
• Siber
• TRW
• Valeo
Approvals / references
(in alphabetical order)
BECHEM electrical contact lubrication products for the auto-
motive industry meet the highest standards and make a major
contribution to the functionality and durability of electrical con-
tact systems with different currents due to their wide service
temperature range. Highly specialised formulations guarantee
excellent oxidation stability and material compatibility as well as
protection against the formation of impurity layers and sparks.
»Electrical contacts require particularly
high-performing lubricants.«
7. 12 13
GKNDriveline
Chassis and brake systems
With maximum material compatibility, corrosion protection,
load-carrying capacity and protection against tribocorrosion,
BECHEM products provide very high levels of reliability over the
lifetime of the product for various systems and applications in
chassis, brake and steering systems and for transmissions and
clutches.
Approvals / references
(in alphabetical order)
PRODUCT
Beruplex LI-EP 2 Mineral oil Lithium
complex
soap
2 180
16
-30 +150 Wheel bearing, drive shaft, clutch release
bearing, brake cylinder
Long-life lubricating grease, reliable protection against corrosion, reduces
wear at high temperatures, humidity and water steam
Berulub CVN 140 Mineral oil Lithium
soap
1 - 2 140
13,5
-35 +130 CV-joint, components of the power train Long-life lubricating grease for heavy-duty constant velocity joints,
contains solid lubricants, optimal wear and corrosion protection
Berulub CVH 170 Mineral oil/
Polyalpha-
olefin (PAO)
Polyurea 1 - 2 170
14
-35 +160 CV-joint, components of the power train Long-life grease for constant velocity joints, suitable for high temperatures,
contains solid lubricants, excellent corrosion and wear protection
Berulub CVH 170 LF Mineral oil/
Polyalpha-
olefin (PAO)
Polyurea 1 - 2 170
14
-35 +160 CV-joint Same properties as Berulub CVH 170 but considerably reduced friction
value based on special additive combination
Berulub FE 16 Polyglycol Lithium
soap
1 - 2 120
20
-40 +120 Elastomer seals, boots in hydraulic brake
systems
Synthetic special lubricant for heavy-duty plain bearings, especially
suitable for friction partners metal/plastics and metal/elastomer
Beruplex LG 21 F Polyglycol Lithium
complex
soap
1 - 2 390
66
-40 +145 Clutch systems, elastic axle bearings,
steering column gasket
Synthetic special lubricant for brake systems, wide temperature range,
resistant to corrosion and oxidation, EP additives, good adhesion
Beruplex LG 1-30 Polyglycol Lithium
complex
soap
1 - 2 30
7
-50 +145 Electro-hydraulic actuators, electrical
parking brake
Wide service temperature range, resistant to corrosion and oxidation,
EP additives, good adhesion, water resistant, neutral towards EPDM
Berulub FR 16 Mineral oil/
Polyalpha-
olefin (PAO)
Special
lithium
soap
2 32
6
-50 +140 Electrical parking brake Suitable for the material combinations plastic/plastic and plastic/steel,
excellent low temperature behaviour, resistant to water and oxidation,
prevents stick-slip, contains PTFE
Berulub FH 57 Mineral oil/
Polyalpha-
olefin (PAO)
Polyurea 1 - 2* 150
20
-40 +160 Steering column assembly Fully synthetic grease for long-life lubrication of polymer components,
excellent noise damping properties, excellent low temperature behaviour
Beruglide L Perfluoro-
polyether
(PFPE)
Polytetraflu-
oroethylene
(PTFE)
1 - 2* 160
16
-40 +190 Steering column assembly Good noise damping properties, excellent compatibility with plastics and
elastomer, good fogging behaviour
BECHEM Ceritol PK 1
Soft
Mineral oil/
Polyalpha-
olefin (PAO)
Polyurea 0 - 1 32
6
-60 +140 Clockspring cartridges, door closing
mechanisms
Special lubricant for metal and polymer materials, excellent low
temperature behaviour, protection against corrosion, resistant to
oxidation, contains EP-additives, prevents stick-slip
Berucoat AF 320 E Organ.
binder
- - - -70 +250 Locking hooks, bolt connections, hinge
pins, cams, notches, springs
Long-life coating of plastic and steel material combinations, prevents
stick-slip, no dust adsorption, excellent protection against corrosion,
oil resistant
Base
oil / base
Thickener
NLG
I-grade
Base
oil viscosity
[m
m
²/s] at 40
°C / 100
°C
Service
tem
perature
range
[°C]
Applications
Noise
dam
ping
Attributes
LubricatingGreases / Pastes
Anti-friction
coating
*Value indicates unworked penetration
noise damping good noise damping very good noise damping
• Brose group 55.1
• Fiat Specification 9.55580 Gras V
• Ford WSD-M1C 234 A2
• GM 9986237
• GM 9986248
• VW-TL 52150
• VW-TL 778 A
8. 14 15
PRODUCT
Berutox VPT 54-2 Perfluoro-
polyether
(PFPE)
Polytetraflu-
oroethylene
(PTFE)
2 210
20
-30 +230 Anti-squeak applications Long-life lubricating grease, resistant to thermal and chemical decom-
position, excellent oxidation stability, excellent compatibility with plastics,
also available in NLGI-grade 1
Berulub FR 16 Polyalpha-
olefin
(PAO)
Special
lithium
soap
2 32
6
-50 +140 Seat track, seat belt height adjustment Suitable for the material combinations plastic/plastic and plastic/steel,
excellent low temperature behaviour, resistant to water and oxidation,
prevents stick-slip, contains PTFE
Berulub FR 43 Polyalpha-
olefin
(PAO)
Special
lithium
soap
2 32
6
-50 +140 Seat recliner, seat adjustment, seat height
adjustment
Suitable for material combinations plastic/plastic and plastic/steel,
excellent low temperature behaviour, resistant to water and oxidation,
prevents stick-slip, contains PTFE, available with UV tracer
Berusoft 15 Polyalpha-
olefin
(PAO)
Polyurea 1 - 2 900
100
-40 +150 Seat recliner, seat adjustment Special grease for noise damping, excellent compatibility with plastics/
elastomers, good resistance to oxidation, low oil separation, prevents
stick-slip, noise damping value: low to medium
Berulub FH 57 Polyalpha-
olefin
(PAO)
Polyurea 1 - 2* 150
20
-40 +160 Seat recliner, easy entry, seat belt height
adjustment, seat adjustment
Fully synthetic grease for long-life lubrication of polymer components,
excellent noise damping properties, excellent low temperature behaviour,
contains PTFE
Berulub XP 746 Ester Gel 0 1200
120
-40 +200 Seat recliner, seat track Noise damping grease, good adhesion, water and fuel resistant, low
oil separation, good oxidation resistance and good protection against
corrosion
Berulub XP 3000 Polyalpha-
olefin
(PAO)
Gel 1 - 2 2400
180
-40 +140 Seat catch, seat track Good plastic and elastomer compatibility, high adhesion, very low oil
separation, excellent protection against corrosion, noise damping
Beruglide L Perfluoro-
polyether
(PFPE)
Polytetraflu-
oroethylene
(PTFE)
1 - 2* 160
16
-40 +190 Anti-squeak applications Good noise damping properties, excellent compatibility with plastics
and elastomer materials, good fogging behaviour, excellent oxidation
stability
Berulub ND-
Dispersion 10
Perfluoro-
polyether
(PFPE)
- - 325
20
-40 +250 Anti-squeak applications For noise damping, excellent plastic/elastomer/non-ferrous metal compa-
tibility, very high thermal stability, excellent resistance to oxidation
Berucoat AF 320 E Organ.
binder
- - - -70 +250 Locking hooks, bolt connections,
hinge pins, cams, notches, springs
Suitable for plastic/steel combinations, prevents stick-slip, no dust
adsorption, excellent protection against corrosion, oil resistant, curing
temperature +120 °C
Berucoat AF 732 Organ.
binder
- - - -70 +250 Ratchet notches, seat belt ratchet, pawls Suitable for metal/metal material combinations, long-life coating,
very good adhesion, no sticking of dust, prevents stick-slip, excellent
protection against corrosion, oil resistant
Berucoat AK 376 Organ.
binder
- - - -40 +120 Anti-squeak applications Long-life lubrication for plastic and/or steel material combinations, no
dust adsorption, prevents stick-slip, good protection against corrosion
Berucoat AK 978 Organ.
binder
- - - -40 +80 Headrest adjustment, anti-squeak
applications
Water based interior AF-coating, prevents stick-slip and disturbing noises,
highly compatible with plastics, transparent, free of formaldehyde
Base
oil / base
Thickener
NLG
I-grade
Base
oil viscosity
[m
m
²/s] at 40
°C / 100
°C
Service
tem
perature
range
[°C]
Applications
Noise
dam
ping
Attributes
LubricatingGreases / PastesAnti-frictioncoatings
*Value indicates unworked penetration
noise damping good noise damping very good noise damping
Disp.
Seating and belt systems
For various applications in automotive seating and belt sys-
tems, whether actuators, cable winch systems or simple gear
segments, with its excellent damping properties, wide service
temperature range and good surface adhesion, the BECHEM
product range offers maximum reliability even in emergency
situations.
Approvals / references
(in alphabetical order)
• Brose group 53.2, Brose group 55.1
• Daimler DBL 6827.42
• Faurecia
• Fiat Specification 9.55580 Gras V
• Ford WSD-M1C 234 A2, Ford WSS-M1C 253 A
• GM W16531-Type 4, GM W16531-Type 5, GM 9986248
• Johnson Controls
• Lear Corporation
• TRW
• VW-TL 778 A, VW-TL 778 B
9. 16 17
KiekertAG
PRODUCT
Berutox FB 48-1 Polyalpha-
olefin
(PAO)
Special
Ca-complex
soap
1 50
8
-50 +160 Door locking systems, central locking
systems, steering lock, bowdes cables
For material combinations plastic/plastic and metal/plastic, resistant to
substances, noise damping, resistant to ageing, low friction coefficient,
prevents stick-slip
Berutox M 21 EPK-A Mineral
oil
Polyurea 1 - 2 490
32
-15 +160 Blocking pins, door check strap, hinges,
gear shift control
Multipurpose grease for long-life lubrication, excellent sealing qualities,
excellent resistance to water and steam, excellent corrosion and wear
protection, EP-properties
Berulub FR 16 B Polyalpha-
olefin
(PAO)
Lithium-/
Ca-complex
soap
2 32
6
-50 +140 Door locking systems, central locking
systems
For material combinations plastic/plastic and plastic/steel, excellent low
temperature behaviour, resistant to water and oxidation, prevents stick-slip
Berulub FR 16 Polyalpha-
olefin
(PAO)
Special
lithium
soap
2 32
6
-50 +140 Door locking systems, central locking
systems
Suitable for the material combinations plastic/plastic and plastic/steel,
excellent low temperature behaviour, resistant to water and oxidation,
prevents stick-slip, contains PTFE
Berulub FR 43 Polyalpha-
olefin
(PAO)
Special
lithium
soap
2 32
6
-50 +140 Door locking systems, central locking
systems
Suitable for material combinations plastic/plastic and plastic/steel, excel-
lent low temperature behaviour, resistant to water and oxidation, prevents
stick-slip, contains PTFE, available with UV tracer
BECHEM Ceritol PK 1 Polyalpha-
olefin
(PAO)
Polyurea 1 50
8
-50 +160 Locking systems, central locking systems Long-life lubrication and protection against corrosion of roller/plain bearings,
mechanisms and switchgear, wide temperature range, EP-additives, resis-
tant to oxidation, protects against aggressive substances
Berulub XP 719 Ester Gel 2* 1600
150
-40 +200 Locking systems, fuel flap, door handle Excellent adhesion and resistance to wash-out, low oil separation,
protection against corrosion, good oxidation resistance, reduces friction
and wear
Berulub XP 746 Ester Gel 0 1200
120
-40 +200 Locking systems, fuel flap, door handle For noise damping in automotive application, good adhesion, water and
fuel resistant, low oil separation, good oxidation resistance and good
protection against corrosion
Berulub XP 3000 Polyalpha-
olefin
(PAO)
Gel 1 - 2 2400
180
-40 +140 Bonnet catch, locking systems Good plastic and elastomer compatibility, high adhesion, good low
temperature properties, very low oil separation, excellent protection
against corrosion, noise damping
Berusoft 15 Polyalpha-
olefin
(PAO)
Polyurea 1 - 2 900
100
-40 +150 Door check strap, rear bench seat
adjustment
Special grease for noise damping, excellent compatibility with elastomers,
good resistance to oxidation, low oil separation, prevents stick-slip
Berusoft 20 Polyalpha-
olefin
(PAO)
Polyurea 0 - 1* 1400
150
-40 +150 Door check strap, rear bench seat
adjustment
Special grease for noise damping, excellent compatibility with elastomers,
good resistance to oxidation, low oil separation, prevents stick-slip
Berucoat AF 732 Organ.
binder
- - - -70 +250 Catches, pawls, springs, locking cylinders Suitable for metal/metal material combinations, long-life coating, very
good adhesion, no sticking of dust, prevents stick-slip, excellent protection
against corrosion, oil resistant
Berucoat AF 320 E Organ.
binder
- - - -70 +250 Catches, pawls, springs, locking systems,
spindels, plastic components
Suitable for plastic/steel combinations, long-life coating, prevents stick-slip,
no dust adsorption, excellent protection against corrosion, oil resistant,
curing temperature +120 °C
Base
oil / base
Thickener
NLG
I-grade
Base
oil viscosity
[m
m
²/s] at 40
°C / 100
°C
Service
tem
perature
range
[°C]
Applications
Noise
dam
ping
Attributes
LubricatingGreases / Pastes
Anti-friction
coatings
*Value indicates unworked penetration
noise damping good noise damping very good noise damping
Locking systems and hinges
For increasingly complex door locking mechanisms and hinges
BECHEM offers the appropriate lubricants and coating systems
characterised by outstanding low-temperature properties, ex-
cellent water and deicing fluid resistance, paint compatibility
and reliable corrosion protection.
Approvals / references
(in alphabetical order)
• Brose group 53.2
• Daimler DBL 6827.42
• Edscha AG
• Fiat Specification 9.55580 Gras V
• Ford WSD-M1C 234 A2
• Ford WSS-M1C 238 B
• Ford WSS-M1C 253 A2
• GM 9986248
• Valeo
• VW-TL 778 A
• VW-TL 778 B
10. 18 19
PRODUCT
Base
Lubrication
and
w
ear
protection
additives
Solvent
Service
tem
perature
range
[°C] 1)
Colour of the
cured
coating
Curing
Applications
Attributes
Berucoat AF 130 Organ.
binder
MoS2
Organ. -70 +250 Black Heat
curing
Locking systems, locking cylinders,
springs, cam shafts, gears, plain
bearings
Long-life lubrication of metal/metal material combinations, pressure resis-
tant, excellent adhesion, prevents stick-slip, excellent protection against
corrosion, oil resistant, curing temperature +120 °C
Berucoat AF 291 Organ.
binder
Graphite Organ. -40 +250
+350
Black Heat
curing
Locking systems, locking cylinders,
springs, cam shafts, gears, plain
bearings
Suitable for metal/metal material combinations, excellent adhesion,
good protection against corrosion, resistant to oil, grease and solvents,
good wear resistance
Berucoat AF 320 E Organ.
binder
PTFE Organ. -70 +250 Black Heat
curing
Locking systems, locking cylinders,
springs, spindles in small gears, plain
bearings, plastics, leather
Suitable for plastic/steel combinations, long-life coating, prevents
stick-slip, no dust adsorption, excellent protection against corrosion,
oil resistant, curing temperature +120 °C
Berucoat AF 438 Inorgan.
binder
MoS2
/
graphite
Organ. -180 +450 Grey-
black
Air curing Cam shaft, gear, plain bearing Suitable for metal/metal material combinations, prevents stick-slip, good
adhesion on smooth surfaces, no dust adsorption, good resistance
against radiation, lowest evaporation in high vacuum
Berucoat AF 481 Organ.
binder
MoS2
/
PTFE
Organ. -40 +250
+450
Grey Heat
curing
Coating of metals, pistons, bearing seats,
plain bearings
Suitable for metal material combinations, very good adhesion, high
pressure resistance, excellent temperature resistance, good corrosion
protection, resistant to oils, greases and solvents, low friction values
Berucoat AF 732 Organ.
binder
MoS2
/
PTFE
Organ. -70 +250 Grey-
black
Heat
curing
Locking systems, locking cylinders,
springs, cam shaft, plain bearing
Suitable for metal/metal material combinations, long-life coating,
very good adhesion, no sticking of dust, prevents stick-slip, excellent
protection against corrosion, oil resistant
Berucoat FX 270 Organ.
binder
Graphite Water -40 +300 Grey-
black
Air curing Wiper blades, seals, O-rings Elastomer coating, prevents stick-slip, resistant to cleaning agents,
wear resistant, temperature resistant, release effect even in the high
temperature range, improved wiping pattern
Berucoat FX 670 Organ.
binder
Graphite/
PTFE
Water -40 +250 Grey-
black
Air curing Wiper blades, seals, O-rings Elastomer coating, prevents stick-slip, resistant to cleaning agents,
wear resistant, temperature resistant, improved wiping pattern
Berucoat FX 876 Organ.
binder
Solids Water -40 +80 White Air curing Lip seals, O-rings, tyre valves Elastomer coating, water based, two-component coating, noise damping,
reduction of friction, good water resistance, wear resistant
Berucoat AK 376 Organ.
binder
PTFE Water -40 +120 Whitish Air curing Springs, spindles with small gears,
plastic, leather, tissue, vinyl
Long-life lubrication for plastic and/or steel material combinations, no
dust adsorption, prevents stick-slip, good protection against corrosion
Berucoat AK 978 Organ.
binder
Solids Water -40 +80 Grey-
white
Air curing Plastic, leather, tissue, vinyl Water based interior AF-coating, prevents stick-slip and disturbing noises,
highly compatible with plastics, transparent, free of formaldehyde
1)
Value marked in grey indicates short term maximum temperature
Anti-friction coatings
Approvals / references
(in alphabetical order)
Anti-friction coatings are touch dry lubricant solutions for
lifetime lubrication in most varied applications. Defined friction
values, reduced wear and tribo-corrosion are only a few
characteristics which allow these innovative coating tech-
nologies. The BECHEM coating product series each offer
numerous advantages for all kinds of automotive applications,
whether for metal materials, elastomers and plastics or leather
and vinyl materials.
• Boshoku Automotive
• Daimler
• Faurecia
• GM W16531-Type 4
• GM W16531-Type 5
• Johnson Controls
• Lear Corporation
• Porsche
• Stoz
11. 20 21
LeopoldKostalGmbH&Co.KG
PRODUCT
Berutox VPT 54-2 Perfluoro-
polyether
(PFPE)
Polytetraflu-
oroethylene
(PTFE)
2 210
20
-30 +230 Instrument panel, seating systems and
door module
Long-life lubricating grease, resistant to thermal and chemical decompo-
sition, excellent oxidation stability, excellent compatibility with plastics,
also available in NLGI-grade 1
Berutox VPT 64-2 Perfluoro-
polyether
(PFPE)
Polytetraflu-
oroethylene
(PTFE)
2 330
30
-30 +260 Instrument panel, seating systems and
door module
Long-life lubricating grease, even in case of vacuum, radiation and
aggressive chemicals, excellent compatibility with plastics, outstanding
thermal stability, neutral in smell, also available in NLGI-grade 1
Berutemp 500 G 2 Perfluoro-
polyether
(PFPE)
Gel 2 510
45
-35 +260 Air vents, anti-squeak applications High-temperature and long-life lubricant for ejector pins/slides (plastic
industry), for noise damping (automotive/interior) and plain bearings,
compatible with plastics and elastomers
Berulub FK-VPT 380 Perfluoro-
polyether
(PFPE)
Polytetraflu-
oroethylene
(PTFE)
- 325
30
-40 +250 Connector gold-/silver contacts PTFE containing special dispersion for life lubrication of plug-in connectors,
high oxidation resistance, excellent compatibility with plastics, prevents
formation of impurity layers
Beruglide L Perfluoro-
polyether
(PFPE)
Polytetraflu-
oroethylene
(PTFE)
1 - 2* 160
16
-40 +190 Electromechanically supported steering Good noise damping properties, excellent compatibility with plastics
and elastomer materials, good fogging behaviour, excellent oxidation
resistance
Berulub FK 164-2 UV Perfluoro-
polyether
(PFPE)
Polytetraflu-
oroethylene
(PTFE)
2 150
45
-60 +250 Plug-in connector, control current and
power switch
Lubricating paste for gold and silver plated sliding/plug-in contacts,
excellent plastics/elastomer compatibility, for currents from 10 mA up
to 30 A
Beruglide H 50 Synthetic oil
combination
Special
lithium soap/
PTFE
2 30
6
-60 +160 Actuators with low starting torque Long-life lubrication for plastic/plastic, plastic/metal and non-ferrous metal/
non-ferrous metal, excellent low temperature behaviour, noise damping,
resistant to water, PTFE, hybrid technology
Berulub ND-Fluid 160 Perfluoro-
polyether
(PFPE)
- - 160
18
-40 +200 Noise reduction for interior parts Noise damping, excellent material compatibility (polymers, elastomers,
non-ferrous metals, leather), high thermal stability and oxidation
resistance
Berulub FK 164
Dispersion OZF 1 - 20
Perfluoro-
polyether
(PFPE)
- - 150
45
-60 +230 Noise damping fluid for areas difficult to
access
Contact protection, a very thin lubricating film with very low contact
resistance is formed after evaporation of the solvent, suitable for contact
partners of silver and gold, 1 mA up to 500 mA
Berutox VPT 64
Dispersion OZF 0,5 - 20
Perfluoro-
polyether
(PFPE)
- - 325
20
-40 +250 Noise damping fluid for areas difficult to
access
Contact protection, a very thin lubricating film with very low contact
resistance is formed after evaporation of the solvent, suitable for contact
partners of silver and gold, 1 mA to 500 mA
Base
oil
Thickener
NLG
I-grade
Base
oil viscosity
[m
m
²/s] at 40
°C / 100
°C
Service
tem
perature
range
[°C]
Applications
Noise
dam
ping
Attributes
LubricatingGreases / PastesFluids/Dispersions
*Value indicates unworked penetration
noise damping good noise damping very good noise damping
Perfluoropolyether (PFPE)
products
Approvals / references
(in alphabetical order)
The high performance PFPE based lubricants in the BECHEM
range are chemically inert (non-reactive) towards most mate-
rials and therefore offer outstanding compatibility especially
with plastics as well as excellent resistance to very high
temperatures. PFPE based lubricant products are high-purity,
fully synthetic base oils with an excellent ageing and oxidation
stability.
• BMW group
• Delphi Automotive
• Faurecia
• Grammer
• Jaguar
• Kostal
• VW-TL 52141
12. 22 23
Noise damping
Greases
Synthetic hydrocarbons with
metal soaps, polyurea or
inorganic thickeners
PFPE (perfluoropolyether oils)
with PTFE
(polytetrafluoroethylene)
Berulub FH 57
Berulub FR 16
Berulub FR 43
Berusoft 10
Berusoft 15
BECHEM Ceritol PK 1
BECHEM Ceritol PK 1 Soft
Beruglide L
Berutox VPT 54-2
Berulub FK 164-2
Berulub ND-Fluid 160
Berulub FK 164
Dispersion OZF 1-10
Berutox VPT 64
Dispersion OZF 0,5-20
Abbreviation Elastomers
ACM acrylate rubber
CR chloroprene rubber
EPDM ethylene-propylene-diene rubber
FKM/FPM fluorinated rubber
FEPM propylene-tetrafluoroethylene rubber
HNBR hydrogenated nitrile-butadiene rubber
NBR nitrile-butadiene rubber
SBR styrene-butadiene rubber
Abbreviation Plastics
ABS acrylonitrile-butadiene-styrene
PA 6 polyamide (polycaprolactam)
PC polycarbonate
PC/ABS polycarbonate/acrylonitrile-butadiene-styrene
PE polyethylene
PET/PBT polyethylene-/polybutylene terephthalate
POM polyoxymethylene, polyacetal
PP polypropylene
PTFE polytetrafluoroethylene
PU polyurethane
PVC polyvinyl chloride
TPE-E thermoplastic elastomer (polyether/polyester)
Lubricatinggreasesandtheir
behaviourtowardssealing
materials(elastomers)
Lubricatinggreasesandtheir
behaviourtowardsplasticmaterials
resistant partly resistant not resistant
Elastomer and plastic compatibility
»Outstanding success worldwide –
BECHEM products for plastic lubrication.«
Noise reduction is an important requirement of lubricant
related issues inside the car. Disturbing noises caused by
vibration have to be eliminated.
For this purpose, BECHEM offers an extensive product range.
Especially for workshops, the BECHEM kit containing noise
damping products and anti-friction coatings is available.
Plastic compatibility of lubricants used in the automotive
industry is of growing importance. The following table
is an extract from the BECHEM brochure „Lubricants
compatible with elastomers and plastics“ and includes
information regarding the compatibility of selected
BECHEM products.
The mentioned compatibilities are based on laboratory tests and references. In view of the variety of used raw materials as well as the complex chemical and morphological structure of the
polymers the given information represent general tendencies only. In individual cases and especially prior to serial production the compatibilities should be confirmed by the supplier or verified
in laboratory tests.
Please get in touch with your responsible sales contact
to order the BECHEM noise damping kit.
13. 7902809965/1609/165815
Lubrication solutions for industry
CARL BECHEM GMBH
Weststr. 120 · 58089 Hagen · Germany · Phone +49 2331 935-0 · Fax +49 2331 935-1199 · bechem@bechem.de · www.bechem.com